mirror of
https://git.FreeBSD.org/src.git
synced 2024-12-20 11:11:24 +00:00
51dbd04609
static device mappings. This SoC relied heavily on the fact that all devices were static-mapped at a fixed address, and it (rather bogusly) used bus_space read and write calls passing hard-coded virtual addresses instead of proper bus handles, relying on the fact that the virtual addresses of the mappings were known at compile time, and relying on the implementation details of arm bus_space never changing. All such usage was replaced with calls to bus_space_map() to obtain a proper bus handle for the read/write calls. This required adjusting some of the #define values that map out hardware registers, and some of them were renamed in the process to make it clear which were defining absolute physical addresses and which were defining offsets. (The ones that just define offsets don't appear to be referenced and probably serve no value other than perhaps documentation.)
666 lines
24 KiB
C
666 lines
24 KiB
C
/*-
|
|
* Copyright (c) 2011 Jakub Wojciech Klama <jceel@FreeBSD.org>
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
#ifndef _ARM_LPC_LPCREG_H
|
|
#define _ARM_LPC_LPCREG_H
|
|
|
|
#define LPC_DEV_PHYS_BASE 0x40000000
|
|
#define LPC_DEV_P5_PHYS_BASE 0x20000000
|
|
#define LPC_DEV_P6_PHYS_BASE 0x30000000
|
|
#define LPC_DEV_SIZE 0x10000000
|
|
|
|
/*
|
|
* Interrupt controller (from UM10326: LPC32x0 User manual, page 87)
|
|
|
|
*/
|
|
#define LPC_INTC_MIC_ER 0x0000
|
|
#define LPC_INTC_MIC_RSR 0x0004
|
|
#define LPC_INTC_MIC_SR 0x0008
|
|
#define LPC_INTC_MIC_APR 0x000c
|
|
#define LPC_INTC_MIC_ATR 0x0010
|
|
#define LPC_INTC_MIC_ITR 0x0014
|
|
#define LPC_INTC_SIC1_ER 0x4000
|
|
#define LPC_INTC_SIC1_RSR 0x4004
|
|
#define LPC_INTC_SIC1_SR 0x4008
|
|
#define LPC_INTC_SIC1_APR 0x400c
|
|
#define LPC_INTC_SIC1_ATR 0x4010
|
|
#define LPC_INTC_SIC1_ITR 0x4014
|
|
#define LPC_INTC_SIC2_ER 0x8000
|
|
#define LPC_INTC_SIC2_RSR 0x8004
|
|
#define LPC_INTC_SIC2_SR 0x8008
|
|
#define LPC_INTC_SIC2_APR 0x800c
|
|
#define LPC_INTC_SIC2_ATR 0x8010
|
|
#define LPC_INTC_SIC2_ITR 0x8014
|
|
|
|
|
|
/*
|
|
* Timer 0|1|2|3|4|5. (from UM10326: LPC32x0 User manual, page 540)
|
|
*/
|
|
#define LPC_TIMER_IR 0x00
|
|
#define LPC_TIMER_TCR 0x04
|
|
#define LPC_TIMER_TCR_ENABLE (1 << 0)
|
|
#define LPC_TIMER_TCR_RESET (1 << 1)
|
|
#define LPC_TIMER_TC 0x08
|
|
#define LPC_TIMER_PR 0x0c
|
|
#define LPC_TIMER_PC 0x10
|
|
#define LPC_TIMER_MCR 0x14
|
|
#define LPC_TIMER_MCR_MR0I (1 << 0)
|
|
#define LPC_TIMER_MCR_MR0R (1 << 1)
|
|
#define LPC_TIMER_MCR_MR0S (1 << 2)
|
|
#define LPC_TIMER_MCR_MR1I (1 << 3)
|
|
#define LPC_TIMER_MCR_MR1R (1 << 4)
|
|
#define LPC_TIMER_MCR_MR1S (1 << 5)
|
|
#define LPC_TIMER_MCR_MR2I (1 << 6)
|
|
#define LPC_TIMER_MCR_MR2R (1 << 7)
|
|
#define LPC_TIMER_MCR_MR2S (1 << 8)
|
|
#define LPC_TIMER_MCR_MR3I (1 << 9)
|
|
#define LPC_TIMER_MCR_MR3R (1 << 10)
|
|
#define LPC_TIMER_MCR_MR3S (1 << 11)
|
|
#define LPC_TIMER_MR0 0x18
|
|
#define LPC_TIMER_CTCR 0x70
|
|
|
|
/*
|
|
* Watchdog timer. (from UM10326: LPC32x0 User manual, page 572)
|
|
*/
|
|
#define LPC_WDTIM_PHYS_BASE (LPC_DEV_PHYS_BASE + 0x3c000)
|
|
#define LPC_WDTIM_INT 0x00
|
|
#define LPC_WDTIM_CTRL 0x04
|
|
#define LPC_WDTIM_COUNTER 0x08
|
|
#define LPC_WDTIM_MCTRL 0x0c
|
|
#define LPC_WDTIM_MATCH0 0x10
|
|
#define LPC_WDTIM_EMR 0x14
|
|
#define LPC_WDTIM_PULSE 0x18
|
|
#define LPC_WDTIM_RES 0x1c
|
|
#define LPC_WDTIM_SIZE 0x20
|
|
|
|
/*
|
|
* Clocking and power control. (from UM10326: LPC32x0 User manual, page 58)
|
|
*/
|
|
#define LPC_CLKPWR_PHYS_BASE (LPC_DEV_PHYS_BASE + 0x4000)
|
|
#define LPC_CLKPWR_PWR_CTRL 0x44
|
|
#define LPC_CLKPWR_OSC_CTRL 0x4c
|
|
#define LPC_CLKPWR_SYSCLK_CTRL 0x50
|
|
#define LPC_CLKPWR_PLL397_CTRL 0x48
|
|
#define LPC_CLKPWR_HCLKPLL_CTRL 0x58
|
|
#define LPC_CLKPWR_HCLKDIV_CTRL 0x40
|
|
#define LPC_CLKPWR_TEST_CTRL 0xa4
|
|
#define LPC_CLKPWR_AUTOCLK_CTRL 0xec
|
|
#define LPC_CLKPWR_START_ER_PIN 0x30
|
|
#define LPC_CLKPWR_START_ER_INT 0x20
|
|
#define LPC_CLKPWR_P0_INTR_ER 0x18
|
|
#define LPC_CLKPWR_START_SR_PIN 0x38
|
|
#define LPC_CLKPWR_START_SR_INT 0x28
|
|
#define LPC_CLKPWR_START_RSR_PIN 0x34
|
|
#define LPC_CLKPWR_START_RSR_INT 0x24
|
|
#define LPC_CLKPWR_START_APR_PIN 0x3c
|
|
#define LPC_CLKPWR_START_APR_INT 0x2c
|
|
#define LPC_CLKPWR_USB_CTRL 0x64
|
|
#define LPC_CLKPWR_USB_CTRL_SLAVE_HCLK (1 << 24)
|
|
#define LPC_CLKPWR_USB_CTRL_I2C_EN (1 << 23)
|
|
#define LPC_CLKPWR_USB_CTRL_DEV_NEED_CLK_EN (1 << 22)
|
|
#define LPC_CLKPWR_USB_CTRL_HOST_NEED_CLK_EN (1 << 21)
|
|
#define LPC_CLKPWR_USB_CTRL_BUSKEEPER (1 << 19)
|
|
#define LPC_CLKPWR_USB_CTRL_CLK_EN2 (1 << 18)
|
|
#define LPC_CLKPWR_USB_CTRL_CLK_EN1 (1 << 17)
|
|
#define LPC_CLKPWR_USB_CTRL_PLL_PDOWN (1 << 16)
|
|
#define LPC_CLKPWR_USB_CTRL_BYPASS (1 << 15)
|
|
#define LPC_CLKPWR_USB_CTRL_DIRECT_OUT (1 << 14)
|
|
#define LPC_CLKPWR_USB_CTRL_FEEDBACK (1 << 13)
|
|
#define LPC_CLKPWR_USB_CTRL_POSTDIV(_x) ((_x & 0x3) << 11)
|
|
#define LPC_CLKPWR_USB_CTRL_PREDIV(_x) ((_x & 0x3) << 9)
|
|
#define LPC_CLKPWR_USB_CTRL_FDBKDIV(_x) (((_x-1) & 0xff) << 1)
|
|
#define LPC_CLKPWR_USB_CTRL_PLL_LOCK (1 << 0)
|
|
#define LPC_CLKPWR_USBDIV_CTRL 0x1c
|
|
#define LPC_CLKPWR_MS_CTRL 0x80
|
|
#define LPC_CLKPWR_MS_CTRL_DISABLE_SD (1 << 10)
|
|
#define LPC_CLKPWR_MS_CTRL_CLOCK_EN (1 << 9)
|
|
#define LPC_CLKPWR_MS_CTRL_MSSDIO23_PAD (1 << 8)
|
|
#define LPC_CLKPWR_MS_CTRL_MSSDIO1_PAD (1 << 7)
|
|
#define LPC_CLKPWR_MS_CTRL_MSSDIO0_PAD (1 << 6)
|
|
#define LPC_CLKPWR_MS_CTRL_SD_CLOCK (1 << 5)
|
|
#define LPC_CLKPWR_MS_CTRL_CLKDIV_MASK 0xf
|
|
#define LPC_CLKPWR_DMACLK_CTRL 0xe8
|
|
#define LPC_CLKPWR_DMACLK_CTRL_EN (1 << 0)
|
|
#define LPC_CLKPWR_FLASHCLK_CTRL 0xc8
|
|
#define LPC_CLKPWR_MACCLK_CTRL 0x90
|
|
#define LPC_CLKPWR_MACCLK_CTRL_REG (1 << 0)
|
|
#define LPC_CLKPWR_MACCLK_CTRL_SLAVE (1 << 1)
|
|
#define LPC_CLKPWR_MACCLK_CTRL_MASTER (1 << 2)
|
|
#define LPC_CLKPWR_MACCLK_CTRL_HDWINF(_n) ((_n & 0x3) << 3)
|
|
#define LPC_CLKPWR_LCDCLK_CTRL 0x54
|
|
#define LPC_CLKPWR_LCDCLK_CTRL_DISPTYPE (1 << 8)
|
|
#define LPC_CLKPWR_LCDCLK_CTRL_MODE(_n) ((_n & 0x3) << 6)
|
|
#define LPC_CLKPWR_LCDCLK_CTRL_MODE_12 0x0
|
|
#define LPC_CLKPWR_LCDCLK_CTRL_MODE_15 0x1
|
|
#define LPC_CLKPWR_LCDCLK_CTRL_MODE_16 0x2
|
|
#define LPC_CLKPWR_LCDCLK_CTRL_MODE_24 0x3
|
|
#define LPC_CLKPWR_LCDCLK_CTRL_HCLKEN (1 << 5)
|
|
#define LPC_CLKPWR_LCDCLK_CTRL_CLKDIV(_n) ((_n) & 0x1f)
|
|
#define LPC_CLKPWR_I2S_CTRL 0x7c
|
|
#define LPC_CLKPWR_SSP_CTRL 0x78
|
|
#define LPC_CLKPWR_SSP_CTRL_SSP1RXDMA (1 << 5)
|
|
#define LPC_CLKPWR_SSP_CTRL_SSP1TXDMA (1 << 4)
|
|
#define LPC_CLKPWR_SSP_CTRL_SSP0RXDMA (1 << 3)
|
|
#define LPC_CLKPWR_SSP_CTRL_SSP0TXDMA (1 << 2)
|
|
#define LPC_CLKPWR_SSP_CTRL_SSP1EN (1 << 1)
|
|
#define LPC_CLKPWR_SSP_CTRL_SSP0EN (1 << 0)
|
|
#define LPC_CLKPWR_SPI_CTRL 0xc4
|
|
#define LPC_CLKPWR_I2CCLK_CTRL 0xac
|
|
#define LPC_CLKPWR_TIMCLK_CTRL1 0xc0
|
|
#define LPC_CLKPWR_TIMCLK_CTRL1_TIMER4 (1 << 0)
|
|
#define LPC_CLKPWR_TIMCLK_CTRL1_TIMER5 (1 << 1)
|
|
#define LPC_CLKPWR_TIMCLK_CTRL1_TIMER0 (1 << 2)
|
|
#define LPC_CLKPWR_TIMCLK_CTRL1_TIMER1 (1 << 3)
|
|
#define LPC_CLKPWR_TIMCLK_CTRL1_TIMER2 (1 << 4)
|
|
#define LPC_CLKPWR_TIMCLK_CTRL1_TIMER3 (1 << 5)
|
|
#define LPC_CLKPWR_TIMCLK_CTRL1_MOTORCTL (1 << 6)
|
|
#define LPC_CLKPWR_TIMCLK_CTRL 0xbc
|
|
#define LPC_CLKPWR_TIMCLK_CTRL_WATCHDOG (1 << 0)
|
|
#define LPC_CLKPWR_TIMCLK_CTRL_HSTIMER (1 << 1)
|
|
#define LPC_CLKPWR_ADCLK_CTRL 0xb4
|
|
#define LPC_CLKPWR_ADCLK_CTRL1 0x60
|
|
#define LPC_CLKPWR_KEYCLK_CTRL 0xb0
|
|
#define LPC_CLKPWR_PWMCLK_CTRL 0xb8
|
|
#define LPC_CLKPWR_UARTCLK_CTRL 0xe4
|
|
#define LPC_CLKPWR_POS0_IRAM_CTRL 0x110
|
|
#define LPC_CLKPWR_POS1_IRAM_CTRL 0x114
|
|
#define LPC_CLKPWR_SIZE 0x118
|
|
|
|
/* Additional UART registers in CLKPWR address space. */
|
|
#define LPC_CLKPWR_UART_U3CLK 0xd0
|
|
#define LPC_CLKPWR_UART_U4CLK 0xd4
|
|
#define LPC_CLKPWR_UART_U5CLK 0xd8
|
|
#define LPC_CLKPWR_UART_U6CLK 0xdc
|
|
#define LPC_CLKPWR_UART_UCLK_HCLK (1 << 16)
|
|
#define LPC_CLKPWR_UART_UCLK_X(_n) (((_n) & 0xff) << 8)
|
|
#define LPC_CLKPWR_UART_UCLK_Y(_n) ((_n) & 0xff)
|
|
#define LPC_CLKPWR_UART_IRDACLK 0xe0
|
|
|
|
/* Additional UART registers */
|
|
#define LPC_UART_BASE 0x80000
|
|
#define LPC_UART_CONTROL_BASE 0x54000
|
|
#define LPC_UART5_BASE 0x90000
|
|
#define LPC_UART_CTRL 0x00
|
|
#define LPC_UART_CLKMODE 0x04
|
|
#define LPC_UART_CLKMODE_UART3(_n) (((_n) & 0x3) << 4)
|
|
#define LPC_UART_CLKMODE_UART4(_n) (((_n) & 0x3) << 6)
|
|
#define LPC_UART_CLKMODE_UART5(_n) (((_n) & 0x3) << 8)
|
|
#define LPC_UART_CLKMODE_UART6(_n) (((_n) & 0x3) << 10)
|
|
#define LPC_UART_LOOP 0x08
|
|
#define LPC_UART_CONTROL_SIZE 0x0c
|
|
#define LPC_UART_FIFOSIZE 64
|
|
|
|
/*
|
|
* Real time clock. (from UM10326: LPC32x0 User manual, page 566)
|
|
*/
|
|
#define LPC_RTC_UCOUNT 0x00
|
|
#define LPC_RTC_DCOUNT 0x04
|
|
#define LPC_RTC_MATCH0 0x08
|
|
#define LPC_RTC_MATCH1 0x0c
|
|
#define LPC_RTC_CTRL 0x10
|
|
#define LPC_RTC_CTRL_ONSW (1 << 7)
|
|
#define LPC_RTC_CTRL_DISABLE (1 << 6)
|
|
#define LPC_RTC_CTRL_RTCRESET (1 << 4)
|
|
#define LPC_RTC_CTRL_MATCH0ONSW (1 << 3)
|
|
#define LPC_RTC_CTRL_MATCH1ONSW (1 << 2)
|
|
#define LPC_RTC_CTRL_MATCH1INTR (1 << 1)
|
|
#define LPC_RTC_CTRL_MATCH0INTR (1 << 0)
|
|
#define LPC_RTC_INTSTAT 0x14
|
|
#define LPC_RTC_KEY 0x18
|
|
#define LPC_RTC_SRAM_BEGIN 0x80
|
|
#define LPC_RTC_SRAM_END 0xff
|
|
|
|
/*
|
|
* MMC/SD controller. (from UM10326: LPC32x0 User manual, page 436)
|
|
*/
|
|
#define LPC_SD_PHYS_BASE (LPC_DEV_P5_PHYS_BASE + 0x98000)
|
|
#define LPC_SD_CLK (13 * 1000 * 1000) // 13Mhz
|
|
#define LPC_SD_POWER 0x00
|
|
#define LPC_SD_POWER_OPENDRAIN (1 << 6)
|
|
#define LPC_SD_POWER_CTRL_OFF 0x00
|
|
#define LPC_SD_POWER_CTRL_UP 0x02
|
|
#define LPC_SD_POWER_CTRL_ON 0x03
|
|
#define LPC_SD_CLOCK 0x04
|
|
#define LPC_SD_CLOCK_WIDEBUS (1 << 11)
|
|
#define LPC_SD_CLOCK_BYPASS (1 << 10)
|
|
#define LPC_SD_CLOCK_PWRSAVE (1 << 9)
|
|
#define LPC_SD_CLOCK_ENABLE (1 << 8)
|
|
#define LPC_SD_CLOCK_CLKDIVMASK 0xff
|
|
#define LPC_SD_ARGUMENT 0x08
|
|
#define LPC_SD_COMMAND 0x0c
|
|
#define LPC_SD_COMMAND_ENABLE (1 << 10)
|
|
#define LPC_SD_COMMAND_PENDING (1 << 9)
|
|
#define LPC_SD_COMMAND_INTERRUPT (1 << 8)
|
|
#define LPC_SD_COMMAND_LONGRSP (1 << 7)
|
|
#define LPC_SD_COMMAND_RESPONSE (1 << 6)
|
|
#define LPC_SD_COMMAND_CMDINDEXMASK 0x3f
|
|
#define LPC_SD_RESPCMD 0x10
|
|
#define LPC_SD_RESP0 0x14
|
|
#define LPC_SD_RESP1 0x18
|
|
#define LPC_SD_RESP2 0x1c
|
|
#define LPC_SD_RESP3 0x20
|
|
#define LPC_SD_DATATIMER 0x24
|
|
#define LPC_SD_DATALENGTH 0x28
|
|
#define LPC_SD_DATACTRL 0x2c
|
|
#define LPC_SD_DATACTRL_BLOCKSIZESHIFT 4
|
|
#define LPC_SD_DATACTRL_BLOCKSIZEMASK 0xf
|
|
#define LPC_SD_DATACTRL_DMAENABLE (1 << 3)
|
|
#define LPC_SD_DATACTRL_MODE (1 << 2)
|
|
#define LPC_SD_DATACTRL_WRITE (0 << 1)
|
|
#define LPC_SD_DATACTRL_READ (1 << 1)
|
|
#define LPC_SD_DATACTRL_ENABLE (1 << 0)
|
|
#define LPC_SD_DATACNT 0x30
|
|
#define LPC_SD_STATUS 0x34
|
|
#define LPC_SD_STATUS_RXDATAAVLBL (1 << 21)
|
|
#define LPC_SD_STATUS_TXDATAAVLBL (1 << 20)
|
|
#define LPC_SD_STATUS_RXFIFOEMPTY (1 << 19)
|
|
#define LPC_SD_STATUS_TXFIFOEMPTY (1 << 18)
|
|
#define LPC_SD_STATUS_RXFIFOFULL (1 << 17)
|
|
#define LPC_SD_STATUS_TXFIFOFULL (1 << 16)
|
|
#define LPC_SD_STATUS_RXFIFOHALFFULL (1 << 15)
|
|
#define LPC_SD_STATUS_TXFIFOHALFEMPTY (1 << 14)
|
|
#define LPC_SD_STATUS_RXACTIVE (1 << 13)
|
|
#define LPC_SD_STATUS_TXACTIVE (1 << 12)
|
|
#define LPC_SD_STATUS_CMDACTIVE (1 << 11)
|
|
#define LPC_SD_STATUS_DATABLOCKEND (1 << 10)
|
|
#define LPC_SD_STATUS_STARTBITERR (1 << 9)
|
|
#define LPC_SD_STATUS_DATAEND (1 << 8)
|
|
#define LPC_SD_STATUS_CMDSENT (1 << 7)
|
|
#define LPC_SD_STATUS_CMDRESPEND (1 << 6)
|
|
#define LPC_SD_STATUS_RXOVERRUN (1 << 5)
|
|
#define LPC_SD_STATUS_TXUNDERRUN (1 << 4)
|
|
#define LPC_SD_STATUS_DATATIMEOUT (1 << 3)
|
|
#define LPC_SD_STATUS_CMDTIMEOUT (1 << 2)
|
|
#define LPC_SD_STATUS_DATACRCFAIL (1 << 1)
|
|
#define LPC_SD_STATUS_CMDCRCFAIL (1 << 0)
|
|
#define LPC_SD_CLEAR 0x38
|
|
#define LPC_SD_MASK0 0x03c
|
|
#define LPC_SD_MASK1 0x40
|
|
#define LPC_SD_FIFOCNT 0x48
|
|
#define LPC_SD_FIFO 0x80
|
|
|
|
/*
|
|
* USB OTG controller (from UM10326: LPC32x0 User manual, page 410)
|
|
*/
|
|
#define LPC_OTG_INT_STATUS 0x100
|
|
#define LPC_OTG_INT_ENABLE 0x104
|
|
#define LPC_OTG_INT_SET 0x108
|
|
#define LPC_OTG_INT_CLEAR 0x10c
|
|
#define LPC_OTG_STATUS 0x110
|
|
#define LPC_OTG_STATUS_ATOB_HNP_TRACK (1 << 9)
|
|
#define LPC_OTG_STATUS_BTOA_HNP_TACK (1 << 8)
|
|
#define LPC_OTG_STATUS_TRANSP_I2C_EN (1 << 7)
|
|
#define LPC_OTG_STATUS_TIMER_RESET (1 << 6)
|
|
#define LPC_OTG_STATUS_TIMER_EN (1 << 5)
|
|
#define LPC_OTG_STATUS_TIMER_MODE (1 << 4)
|
|
#define LPC_OTG_STATUS_TIMER_SCALE (1 << 2)
|
|
#define LPC_OTG_STATUS_HOST_EN (1 << 0)
|
|
#define LPC_OTG_TIMER 0x114
|
|
#define LPC_OTG_I2C_TXRX 0x300
|
|
#define LPC_OTG_I2C_STATUS 0x304
|
|
#define LPC_OTG_I2C_STATUS_TFE (1 << 11)
|
|
#define LPC_OTG_I2C_STATUS_TFF (1 << 10)
|
|
#define LPC_OTG_I2C_STATUS_RFE (1 << 9)
|
|
#define LPC_OTG_I2C_STATUS_RFF (1 << 8)
|
|
#define LPC_OTG_I2C_STATUS_SDA (1 << 7)
|
|
#define LPC_OTG_I2C_STATUS_SCL (1 << 6)
|
|
#define LPC_OTG_I2C_STATUS_ACTIVE (1 << 5)
|
|
#define LPC_OTG_I2C_STATUS_DRSI (1 << 4)
|
|
#define LPC_OTG_I2C_STATUS_DRMI (1 << 3)
|
|
#define LPC_OTG_I2C_STATUS_NAI (1 << 2)
|
|
#define LPC_OTG_I2C_STATUS_AFI (1 << 1)
|
|
#define LPC_OTG_I2C_STATUS_TDI (1 << 0)
|
|
#define LPC_OTG_I2C_CTRL 0x308
|
|
#define LPC_OTG_I2C_CTRL_SRST (1 << 8)
|
|
#define LPC_OTG_I2C_CTRL_TFFIE (1 << 7)
|
|
#define LPC_OTG_I2C_CTRL_RFDAIE (1 << 6)
|
|
#define LPC_OTG_I2C_CTRL_RFFIE (1 << 5)
|
|
#define LPC_OTG_I2C_CTRL_DRSIE (1 << 4)
|
|
#define LPC_OTG_I2C_CTRL_DRMIE (1 << 3)
|
|
#define LPC_OTG_I2C_CTRL_NAIE (1 << 2)
|
|
#define LPC_OTG_I2C_CTRL_AFIE (1 << 1)
|
|
#define LPC_OTG_I2C_CTRL_TDIE (1 << 0)
|
|
#define LPC_OTG_I2C_CLKHI 0x30c
|
|
#define LPC_OTG_I2C_CLKLO 0x310
|
|
#define LPC_OTG_CLOCK_CTRL 0xff4
|
|
#define LPC_OTG_CLOCK_CTRL_AHB_EN (1 << 4)
|
|
#define LPC_OTG_CLOCK_CTRL_OTG_EN (1 << 3)
|
|
#define LPC_OTG_CLOCK_CTRL_I2C_EN (1 << 2)
|
|
#define LPC_OTG_CLOCK_CTRL_DEV_EN (1 << 1)
|
|
#define LPC_OTG_CLOCK_CTRL_HOST_EN (1 << 0)
|
|
#define LPC_OTG_CLOCK_STATUS 0xff8
|
|
|
|
/*
|
|
* ISP3101 USB transceiver registers
|
|
*/
|
|
#define LPC_ISP3101_I2C_ADDR 0x2d
|
|
#define LPC_ISP3101_MODE_CONTROL_1 0x04
|
|
#define LPC_ISP3101_MC1_SPEED_REG (1 << 0)
|
|
#define LPC_ISP3101_MC1_SUSPEND_REG (1 << 1)
|
|
#define LPC_ISP3101_MC1_DAT_SE0 (1 << 2)
|
|
#define LPC_ISP3101_MC1_TRANSPARENT (1 << 3)
|
|
#define LPC_ISP3101_MC1_BDIS_ACON_EN (1 << 4)
|
|
#define LPC_ISP3101_MC1_OE_INT_EN (1 << 5)
|
|
#define LPC_ISP3101_MC1_UART_EN (1 << 6)
|
|
#define LPC_ISP3101_MODE_CONTROL_2 0x12
|
|
#define LPC_ISP3101_MC2_GLOBAL_PWR_DN (1 << 0)
|
|
#define LPC_ISP3101_MC2_SPD_SUSP_CTRL (1 << 1)
|
|
#define LPC_ISP3101_MC2_BI_DI (1 << 2)
|
|
#define LPC_ISP3101_MC2_TRANSP_BDIR0 (1 << 3)
|
|
#define LPC_ISP3101_MC2_TRANSP_BDIR1 (1 << 4)
|
|
#define LPC_ISP3101_MC2_AUDIO_EN (1 << 5)
|
|
#define LPC_ISP3101_MC2_PSW_EN (1 << 6)
|
|
#define LPC_ISP3101_MC2_EN2V7 (1 << 7)
|
|
#define LPC_ISP3101_OTG_CONTROL_1 0x06
|
|
#define LPC_ISP3101_OTG1_DP_PULLUP (1 << 0)
|
|
#define LPC_ISP3101_OTG1_DM_PULLUP (1 << 1)
|
|
#define LPC_ISP3101_OTG1_DP_PULLDOWN (1 << 2)
|
|
#define LPC_ISP3101_OTG1_DM_PULLDOWN (1 << 3)
|
|
#define LPC_ISP3101_OTG1_ID_PULLDOWN (1 << 4)
|
|
#define LPC_ISP3101_OTG1_VBUS_DRV (1 << 5)
|
|
#define LPC_ISP3101_OTG1_VBUS_DISCHRG (1 << 6)
|
|
#define LPC_ISP3101_OTG1_VBUS_CHRG (1 << 7)
|
|
#define LPC_ISP3101_OTG_CONTROL_2 0x10
|
|
#define LPC_ISP3101_OTG_INTR_LATCH 0x0a
|
|
#define LPC_ISP3101_OTG_INTR_FALLING 0x0c
|
|
#define LPC_ISP3101_OTG_INTR_RISING 0x0e
|
|
#define LPC_ISP3101_REG_CLEAR_ADDR 0x01
|
|
|
|
/*
|
|
* LCD Controller (from UM10326: LPC32x0 User manual, page 229)
|
|
*/
|
|
#define LPC_LCD_TIMH 0x00
|
|
#define LPC_LCD_TIMH_HBP(_n) (((_n) & 0xff) << 24)
|
|
#define LPC_LCD_TIMH_HFP(_n) (((_n) & 0xff) << 16)
|
|
#define LPC_LCD_TIMH_HSW(_n) (((_n) & 0xff) << 8)
|
|
#define LPC_LCD_TIMH_PPL(_n) (((_n) / 16 - 1) << 2)
|
|
#define LPC_LCD_TIMV 0x04
|
|
#define LPC_LCD_TIMV_VBP(_n) (((_n) & 0xff) << 24)
|
|
#define LPC_LCD_TIMV_VFP(_n) (((_n) & 0xff) << 16)
|
|
#define LPC_LCD_TIMV_VSW(_n) (((_n) & 0x3f) << 10)
|
|
#define LPC_LCD_TIMV_LPP(_n) ((_n) & 0x1ff)
|
|
#define LPC_LCD_POL 0x08
|
|
#define LPC_LCD_POL_PCD_HI (((_n) & 0x1f) << 27)
|
|
#define LPC_LCD_POL_BCD (1 << 26)
|
|
#define LPC_LCD_POL_CPL(_n) (((_n) & 0x3ff) << 16)
|
|
#define LPC_LCD_POL_IOE (1 << 14)
|
|
#define LPC_LCD_POL_IPC (1 << 13)
|
|
#define LPC_LCD_POL_IHS (1 << 12)
|
|
#define LPC_LCD_POL_IVS (1 << 11)
|
|
#define LPC_LCD_POL_ACB(_n) ((_n & 0x1f) << 6)
|
|
#define LPC_LCD_POL_CLKSEL (1 << 5)
|
|
#define LPC_LCD_POL_PCD_LO(_n) ((_n) & 0x1f)
|
|
#define LPC_LCD_LE 0x0c
|
|
#define LPC_LCD_LE_LEE (1 << 16)
|
|
#define LPC_LCD_LE_LED ((_n) & 0x7f)
|
|
#define LPC_LCD_UPBASE 0x10
|
|
#define LPC_LCD_LPBASE 0x14
|
|
#define LPC_LCD_CTRL 0x18
|
|
#define LPC_LCD_CTRL_WATERMARK (1 << 16)
|
|
#define LPC_LCD_CTRL_LCDVCOMP(_n) (((_n) & 0x3) << 12)
|
|
#define LPC_LCD_CTRL_LCDPWR (1 << 11)
|
|
#define LPC_LCD_CTRL_BEPO (1 << 10)
|
|
#define LPC_LCD_CTRL_BEBO (1 << 9)
|
|
#define LPC_LCD_CTRL_BGR (1 << 8)
|
|
#define LPC_LCD_CTRL_LCDDUAL (1 << 7)
|
|
#define LPC_LCD_CTRL_LCDMONO8 (1 << 6)
|
|
#define LPC_LCD_CTRL_LCDTFT (1 << 5)
|
|
#define LPC_LCD_CTRL_LCDBW (1 << 4)
|
|
#define LPC_LCD_CTRL_LCDBPP(_n) (((_n) & 0x7) << 1)
|
|
#define LPC_LCD_CTRL_BPP1 0
|
|
#define LPC_LCD_CTRL_BPP2 1
|
|
#define LPC_LCD_CTRL_BPP4 2
|
|
#define LPC_LCD_CTRL_BPP8 3
|
|
#define LPC_LCD_CTRL_BPP16 4
|
|
#define LPC_LCD_CTRL_BPP24 5
|
|
#define LPC_LCD_CTRL_BPP16_565 6
|
|
#define LPC_LCD_CTRL_BPP12_444 7
|
|
#define LPC_LCD_CTRL_LCDEN (1 << 0)
|
|
#define LPC_LCD_INTMSK 0x1c
|
|
#define LPC_LCD_INTRAW 0x20
|
|
#define LPC_LCD_INTSTAT 0x24
|
|
#define LPC_LCD_INTCLR 0x28
|
|
#define LPC_LCD_UPCURR 0x2c
|
|
#define LPC_LCD_LPCURR 0x30
|
|
#define LPC_LCD_PAL 0x200
|
|
#define LPC_LCD_CRSR_IMG 0x800
|
|
#define LPC_LCD_CRSR_CTRL 0xc00
|
|
#define LPC_LCD_CRSR_CFG 0xc04
|
|
#define LPC_LCD_CRSR_PAL0 0xc08
|
|
#define LPC_LCD_CRSR_PAL1 0xc0c
|
|
#define LPC_LCD_CRSR_XY 0xc10
|
|
#define LPC_LCD_CRSR_CLIP 0xc14
|
|
#define LPC_LCD_CRSR_INTMSK 0xc20
|
|
#define LPC_LCD_CRSR_INTCLR 0xc24
|
|
#define LPC_LCD_CRSR_INTRAW 0xc28
|
|
#define LPC_LCD_CRSR_INTSTAT 0xc2c
|
|
|
|
/*
|
|
* SPI interface (from UM10326: LPC32x0 User manual, page 483)
|
|
*/
|
|
#define LPC_SPI_GLOBAL 0x00
|
|
#define LPC_SPI_GLOBAL_RST (1 << 1)
|
|
#define LPC_SPI_GLOBAL_ENABLE (1 << 0)
|
|
#define LPC_SPI_CON 0x04
|
|
#define LPC_SPI_CON_UNIDIR (1 << 23)
|
|
#define LPC_SPI_CON_BHALT (1 << 22)
|
|
#define LPC_SPI_CON_BPOL (1 << 21)
|
|
#define LPC_SPI_CON_MSB (1 << 19)
|
|
#define LPC_SPI_CON_MODE(_n) ((_n & 0x3) << 16)
|
|
#define LPC_SPI_CON_RXTX (1 << 15)
|
|
#define LPC_SPI_CON_THR (1 << 14)
|
|
#define LPC_SPI_CON_SHIFT_OFF (1 << 13)
|
|
#define LPC_SPI_CON_BITNUM(_n) ((_n & 0xf) << 9)
|
|
#define LPC_SPI_CON_MS (1 << 7)
|
|
#define LPC_SPI_CON_RATE(_n) (_n & 0x7f)
|
|
#define LPC_SPI_FRM 0x08
|
|
#define LPC_SPI_IER 0x0c
|
|
#define LPC_SPI_IER_INTEOT (1 << 1)
|
|
#define LPC_SPI_IER_INTTHR (1 << 0)
|
|
#define LPC_SPI_STAT 0x10
|
|
#define LPC_SPI_STAT_INTCLR (1 << 8)
|
|
#define LPC_SPI_STAT_EOT (1 << 7)
|
|
#define LPC_SPI_STAT_BUSYLEV (1 << 6)
|
|
#define LPC_SPI_STAT_SHIFTACT (1 << 3)
|
|
#define LPC_SPI_STAT_BF (1 << 2)
|
|
#define LPC_SPI_STAT_THR (1 << 1)
|
|
#define LPC_SPI_STAT_BE (1 << 0)
|
|
#define LPC_SPI_DAT 0x14
|
|
#define LPC_SPI_TIM_CTRL 0x400
|
|
#define LPC_SPI_TIM_COUNT 0x404
|
|
#define LPC_SPI_TIM_STAT 0x408
|
|
|
|
/*
|
|
* SSP interface (from UM10326: LPC32x0 User manual, page 500)
|
|
*/
|
|
#define LPC_SSP0_BASE 0x4c00
|
|
#define LPC_SSP1_BASE 0xc000
|
|
#define LPC_SSP_CR0 0x00
|
|
#define LPC_SSP_CR0_DSS(_n) ((_n-1) & 0xf)
|
|
#define LPC_SSP_CR0_TI (1 << 4)
|
|
#define LPC_SSP_CR0_MICROWIRE (1 << 5)
|
|
#define LPC_SSP_CR0_CPOL (1 << 6)
|
|
#define LPC_SSP_CR0_CPHA (1 << 7)
|
|
#define LPC_SSP_CR0_SCR(_n) ((_x & & 0xff) << 8)
|
|
#define LPC_SSP_CR1 0x04
|
|
#define LPC_SSP_CR1_LBM (1 << 0)
|
|
#define LPC_SSP_CR1_SSE (1 << 1)
|
|
#define LPC_SSP_CR1_MS (1 << 2)
|
|
#define LPC_SSP_CR1_SOD (1 << 3)
|
|
#define LPC_SSP_DR 0x08
|
|
#define LPC_SSP_SR 0x0c
|
|
#define LPC_SSP_SR_TFE (1 << 0)
|
|
#define LPC_SSP_SR_TNF (1 << 1)
|
|
#define LPC_SSP_SR_RNE (1 << 2)
|
|
#define LPC_SSP_SR_RFF (1 << 3)
|
|
#define LPC_SSP_SR_BSY (1 << 4)
|
|
#define LPC_SSP_CPSR 0x10
|
|
#define LPC_SSP_IMSC 0x14
|
|
#define LPC_SSP_IMSC_RORIM (1 << 0)
|
|
#define LPC_SSP_IMSC_RTIM (1 << 1)
|
|
#define LPC_SSP_IMSC_RXIM (1 << 2)
|
|
#define LPC_SSP_IMSC_TXIM (1 << 3)
|
|
#define LPC_SSP_RIS 0x18
|
|
#define LPC_SSP_RIS_RORRIS (1 << 0)
|
|
#define LPC_SSP_RIS_RTRIS (1 << 1)
|
|
#define LPC_SSP_RIS_RXRIS (1 << 2)
|
|
#define LPC_SSP_RIS_TXRIS (1 << 3)
|
|
#define LPC_SSP_MIS 0x1c
|
|
#define LPC_SSP_ICR 0x20
|
|
#define LPC_SSP_DMACR 0x24
|
|
|
|
/*
|
|
* GPIO (from UM10326: LPC32x0 User manual, page 606)
|
|
*/
|
|
#define LPC_GPIO_PHYS_BASE (LPC_DEV_PHYS_BASE + 0x28000)
|
|
#define LPC_GPIO_P0_COUNT 8
|
|
#define LPC_GPIO_P1_COUNT 24
|
|
#define LPC_GPIO_P2_COUNT 13
|
|
#define LPC_GPIO_P3_COUNT 52
|
|
#define LPC_GPIO_P0_INP_STATE 0x40
|
|
#define LPC_GPIO_P0_OUTP_SET 0x44
|
|
#define LPC_GPIO_P0_OUTP_CLR 0x48
|
|
#define LPC_GPIO_P0_OUTP_STATE 0x4c
|
|
#define LPC_GPIO_P0_DIR_SET 0x50
|
|
#define LPC_GPIO_P0_DIR_CLR 0x54
|
|
#define LPC_GPIO_P0_DIR_STATE 0x58
|
|
#define LPC_GPIO_P1_INP_STATE 0x60
|
|
#define LPC_GPIO_P1_OUTP_SET 0x64
|
|
#define LPC_GPIO_P1_OUTP_CLR 0x68
|
|
#define LPC_GPIO_P1_OUTP_STATE 0x6c
|
|
#define LPC_GPIO_P1_DIR_SET 0x70
|
|
#define LPC_GPIO_P1_DIR_CLR 0x74
|
|
#define LPC_GPIO_P1_DIR_STATE 0x78
|
|
#define LPC_GPIO_P2_INP_STATE 0x1c
|
|
#define LPC_GPIO_P2_OUTP_SET 0x20
|
|
#define LPC_GPIO_P2_OUTP_CLR 0x24
|
|
#define LPC_GPIO_P2_DIR_SET 0x10
|
|
#define LPC_GPIO_P2_DIR_CLR 0x14
|
|
#define LPC_GPIO_P2_DIR_STATE 0x14
|
|
#define LPC_GPIO_P3_INP_STATE 0x00
|
|
#define LPC_GPIO_P3_OUTP_SET 0x04
|
|
#define LPC_GPIO_P3_OUTP_CLR 0x08
|
|
#define LPC_GPIO_P3_OUTP_STATE 0x0c
|
|
#define LPC_GPIO_SIZE 0x80
|
|
|
|
/* Aliases for logical pin numbers: */
|
|
#define LPC_GPIO_GPI_00(_n) (0 + _n)
|
|
#define LPC_GPIO_GPI_15(_n) (10 + _n)
|
|
#define LPC_GPIO_GPI_25 (19)
|
|
#define LPC_GPIO_GPI_27(_n) (20 + _n)
|
|
#define LPC_GPIO_GPO_00(_n) (22 + _n)
|
|
#define LPC_GPIO_GPIO_00(_n) (46 + _n)
|
|
/* SPI devices chip selects: */
|
|
#define SSD1289_CS_PIN LPC_GPIO_GPO_00(4)
|
|
#define SSD1289_DC_PIN LPC_GPIO_GPO_00(5)
|
|
#define ADS7846_CS_PIN LPC_GPIO_GPO_00(11)
|
|
#define ADS7846_INTR_PIN LPC_GPIO_GPIO_00(0)
|
|
|
|
/*
|
|
* GPDMA controller (from UM10326: LPC32x0 User manual, page 106)
|
|
*/
|
|
#define LPC_DMAC_INTSTAT 0x00
|
|
#define LPC_DMAC_INTTCSTAT 0x04
|
|
#define LPC_DMAC_INTTCCLEAR 0x08
|
|
#define LPC_DMAC_INTERRSTAT 0x0c
|
|
#define LPC_DMAC_INTERRCLEAR 0x10
|
|
#define LPC_DMAC_RAWINTTCSTAT 0x14
|
|
#define LPC_DMAC_RAWINTERRSTAT 0x18
|
|
#define LPC_DMAC_ENABLED_CHANNELS 0x1c
|
|
#define LPC_DMAC_SOFTBREQ 0x20
|
|
#define LPC_DMAC_SOFTSREQ 0x24
|
|
#define LPC_DMAC_SOFTLBREQ 0x28
|
|
#define LPC_DMAC_SOFTLSREQ 0x2c
|
|
#define LPC_DMAC_CONFIG 0x30
|
|
#define LPC_DMAC_CONFIG_M1 (1 << 2)
|
|
#define LPC_DMAC_CONFIG_M0 (1 << 1)
|
|
#define LPC_DMAC_CONFIG_ENABLE (1 << 0)
|
|
#define LPC_DMAC_CHADDR(_n) (0x100 + (_n * 0x20))
|
|
#define LPC_DMAC_CHNUM 8
|
|
#define LPC_DMAC_CHSIZE 0x20
|
|
#define LPC_DMAC_CH_SRCADDR 0x00
|
|
#define LPC_DMAC_CH_DSTADDR 0x04
|
|
#define LPC_DMAC_CH_LLI 0x08
|
|
#define LPC_DMAC_CH_LLI_AHB1 (1 << 0)
|
|
#define LPC_DMAC_CH_CONTROL 0x0c
|
|
#define LPC_DMAC_CH_CONTROL_I (1U << 31)
|
|
#define LPC_DMAC_CH_CONTROL_DI (1 << 27)
|
|
#define LPC_DMAC_CH_CONTROL_SI (1 << 26)
|
|
#define LPC_DMAC_CH_CONTROL_D (1 << 25)
|
|
#define LPC_DMAC_CH_CONTROL_S (1 << 24)
|
|
#define LPC_DMAC_CH_CONTROL_WIDTH_4 2
|
|
#define LPC_DMAC_CH_CONTROL_DWIDTH(_n) ((_n & 0x7) << 21)
|
|
#define LPC_DMAC_CH_CONTROL_SWIDTH(_n) ((_n & 0x7) << 18)
|
|
#define LPC_DMAC_CH_CONTROL_BURST_8 2
|
|
#define LPC_DMAC_CH_CONTROL_DBSIZE(_n) ((_n & 0x7) << 15)
|
|
#define LPC_DMAC_CH_CONTROL_SBSIZE(_n) ((_n & 0x7) << 12)
|
|
#define LPC_DMAC_CH_CONTROL_XFERLEN(_n) (_n & 0xfff)
|
|
#define LPC_DMAC_CH_CONFIG 0x10
|
|
#define LPC_DMAC_CH_CONFIG_H (1 << 18)
|
|
#define LPC_DMAC_CH_CONFIG_A (1 << 17)
|
|
#define LPC_DMAC_CH_CONFIG_L (1 << 16)
|
|
#define LPC_DMAC_CH_CONFIG_ITC (1 << 15)
|
|
#define LPC_DMAC_CH_CONFIG_IE (1 << 14)
|
|
#define LPC_DMAC_CH_CONFIG_FLOWCNTL(_n) ((_n & 0x7) << 11)
|
|
#define LPC_DMAC_CH_CONFIG_DESTP(_n) ((_n & 0x1f) << 6)
|
|
#define LPC_DMAC_CH_CONFIG_SRCP(_n) ((_n & 0x1f) << 1)
|
|
#define LPC_DMAC_CH_CONFIG_E (1 << 0)
|
|
|
|
/* DMA flow control values */
|
|
#define LPC_DMAC_FLOW_D_M2M 0
|
|
#define LPC_DMAC_FLOW_D_M2P 1
|
|
#define LPC_DMAC_FLOW_D_P2M 2
|
|
#define LPC_DMAC_FLOW_D_P2P 3
|
|
#define LPC_DMAC_FLOW_DP_P2P 4
|
|
#define LPC_DMAC_FLOW_P_M2P 5
|
|
#define LPC_DMAC_FLOW_P_P2M 6
|
|
#define LPC_DMAC_FLOW_SP_P2P 7
|
|
|
|
/* DMA peripheral ID's */
|
|
#define LPC_DMAC_I2S0_DMA0_ID 0
|
|
#define LPC_DMAC_NAND_ID 1
|
|
#define LPC_DMAC_IS21_DMA0_ID 2
|
|
#define LPC_DMAC_SSP1_ID 3
|
|
#define LPC_DMAC_SPI2_ID 3
|
|
#define LPC_DMAC_SD_ID 4
|
|
#define LPC_DMAC_UART1_TX_ID 5
|
|
#define LPC_DMAC_UART1_RX_ID 6
|
|
#define LPC_DMAC_UART2_TX_ID 7
|
|
#define LPC_DMAC_UART2_RX_ID 8
|
|
#define LPC_DMAC_UART7_TX_ID 9
|
|
#define LPC_DMAC_UART7_RX_ID 10
|
|
#define LPC_DMAC_I2S1_DMA1_ID 10
|
|
#define LPC_DMAC_SPI1_ID 11
|
|
#define LPC_DMAC_SSP1_TX_ID 11
|
|
#define LPC_DMAC_NAND2_ID 12
|
|
#define LPC_DMAC_I2S0_DMA1_ID 13
|
|
#define LPC_DMAC_SSP0_RX 14
|
|
#define LPC_DMAC_SSP0_TX 15
|
|
|
|
#endif /* _ARM_LPC_LPCREG_H */
|