mirror/freebsd
1
0
Fork 0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-27 11:55:06 +00:00
Code Issues Releases Activity
3bc124d470
freebsd/sys/dev/isp/isp_freebsd.c

708 lines
18 KiB
C
Raw Blame History

/* $Id: $ */
/* isp_freebsd.c 1.13 */
/*
* Platform (FreeBSD) dependent common attachment code for Qlogic adapters.
*
*---------------------------------------
* Copyright (c) 1997, 1998 by Matthew Jacob
* NASA/Ames Research Center
* All rights reserved.
*---------------------------------------
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice immediately at the beginning of the file, without modification,
* this list of conditions, and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <dev/isp/isp_freebsd.h>
#if __FreeBSD_version >= 300004
static void isp_async __P((void *, u_int32_t, struct cam_path *, void *));
static void isp_poll __P((struct cam_sim *));
static void isp_action __P((struct cam_sim *, union ccb *));
void
isp_attach(isp)
struct ispsoftc *isp;
{
struct ccb_setasync csa;
struct cam_devq *devq;
/*
* Create the device queue for our SIM.
*/
devq = cam_simq_alloc(MAXISPREQUEST);
if (devq == NULL) {
return;
}
/*
* Construct our SIM entry
*/
isp->isp_sim = cam_sim_alloc(isp_action, isp_poll, "isp", isp,
isp->isp_unit, 1, MAXISPREQUEST, devq);
if (isp->isp_sim == NULL) {
cam_simq_free(devq);
return;
}
if (xpt_bus_register(isp->isp_sim, 0) != CAM_SUCCESS) {
cam_sim_free(isp->isp_sim, TRUE);
return;
}
if (xpt_create_path(&isp->isp_path, NULL, cam_sim_path(isp->isp_sim),
CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD) != CAM_REQ_CMP) {
xpt_bus_deregister(cam_sim_path(isp->isp_sim));
cam_sim_free(isp->isp_sim, TRUE);
return;
}
xpt_setup_ccb(&csa.ccb_h, isp->isp_path, 5);
csa.ccb_h.func_code = XPT_SASYNC_CB;
csa.event_enable = AC_LOST_DEVICE;
csa.callback = isp_async;
csa.callback_arg = isp->isp_sim;
xpt_action((union ccb *)&csa);
/*
* Set base transfer capabilities for Fibre Channel.
* Technically not correct because we don't know
* what media we're running on top of- but we'll
* look good if we always say 100MB/s.
*/
if (isp->isp_type & ISP_HA_FC) {
isp->isp_sim->base_transfer_speed = 100000;
}
isp->isp_state = ISP_RUNSTATE;
}
static void
isp_async(cbarg, code, path, arg)
void *cbarg;
u_int32_t code;
struct cam_path *path;
void *arg;
{
struct cam_sim *sim;
struct ispsoftc *isp;
sim = (struct cam_sim *)cbarg;
isp = (struct ispsoftc *) cam_sim_softc(sim);
switch (code) {
case AC_LOST_DEVICE:
if (isp->isp_type & ISP_HA_SCSI) {
u_int16_t oflags, nflags;
sdparam *sdp = isp->isp_param;
int s, tgt = xpt_path_target_id(path);
nflags = DPARM_SAFE_DFLT;
if (isp->isp_fwrev >= ISP_FW_REV(7, 55)) {
nflags |= DPARM_NARROW | DPARM_ASYNC;
}
oflags = sdp->isp_devparam[tgt].dev_flags;
sdp->isp_devparam[tgt].dev_flags = nflags;
sdp->isp_devparam[tgt].dev_update = 1;
s = splcam();
(void) isp_control(isp, ISPCTL_UPDATE_PARAMS, NULL);
(void) splx(s);
sdp->isp_devparam[tgt].dev_flags = oflags;
}
break;
default:
break;
}
}
static void
isp_poll(sim)
struct cam_sim *sim;
{
isp_intr((struct ispsoftc *) cam_sim_softc(sim));
}
static void
isp_action(sim, ccb)
struct cam_sim *sim;
union ccb *ccb;
{
int s, tgt, error;
struct ispsoftc *isp;
struct ccb_trans_settings *cts;
CAM_DEBUG(ccb->ccb_h.path, CAM_DEBUG_TRACE, ("isp_action\n"));
isp = (struct ispsoftc *)cam_sim_softc(sim);
ccb->ccb_h.sim_priv.entries[0].field = 0;
ccb->ccb_h.sim_priv.entries[1].ptr = isp;
IDPRINTF(4, ("%s: isp_action code %x\n", isp->isp_name,
ccb->ccb_h.func_code));
switch (ccb->ccb_h.func_code) {
case XPT_SCSI_IO: /* Execute the requested I/O operation */
/*
* Do a couple of preliminary checks...
*/
if ((ccb->ccb_h.flags & CAM_CDB_POINTER) != 0) {
if ((ccb->ccb_h.flags & CAM_CDB_PHYS) != 0) {
ccb->ccb_h.status = CAM_REQ_INVALID;
xpt_done(ccb);
break;
}
}
if (isp->isp_type & ISP_HA_SCSI) {
if (ccb->ccb_h.target_id > (MAX_TARGETS-1)) {
ccb->ccb_h.status = CAM_PATH_INVALID;
} else if (isp->isp_fwrev >= ISP_FW_REV(7, 55)) {
/*
* Too much breakage.
*/
#if 0
if (ccb->ccb_h.target_lun > 31) {
ccb->ccb_h.status = CAM_PATH_INVALID;
}
#else
if (ccb->ccb_h.target_lun > 7) {
ccb->ccb_h.status = CAM_PATH_INVALID;
}
#endif
} else if (ccb->ccb_h.target_lun > 7) {
ccb->ccb_h.status = CAM_PATH_INVALID;
}
} else {
if (ccb->ccb_h.target_id > (MAX_FC_TARG-1)) {
ccb->ccb_h.status = CAM_PATH_INVALID;
#ifdef SCCLUN
} else if (ccb->ccb_h.target_lun > 15) {
ccb->ccb_h.status = CAM_PATH_INVALID;
#else
} else if (ccb->ccb_h.target_lun > 65535) {
ccb->ccb_h.status = CAM_PATH_INVALID;
#endif
}
}
if (ccb->ccb_h.status == CAM_PATH_INVALID) {
printf("%s: invalid tgt/lun (%d.%d) in XPT_SCSI_IO\n",
isp->isp_name, ccb->ccb_h.target_id,
ccb->ccb_h.target_lun);
xpt_done(ccb);
break;
}
s = splcam();
switch (ispscsicmd((ISP_SCSI_XFER_T *) ccb)) {
case CMD_QUEUED:
ccb->ccb_h.status |= CAM_SIM_QUEUED;
break;
case CMD_EAGAIN:
if (isp->isp_osinfo.simqfrozen == 0) {
xpt_freeze_simq(sim, 1);
isp->isp_osinfo.simqfrozen = 1;
}
ccb->ccb_h.status &= ~CAM_STATUS_MASK;
ccb->ccb_h.status |= CAM_REQUEUE_REQ;
xpt_done(ccb);
break;
case CMD_COMPLETE:
/*
* Just make sure that we didn't get it returned
* as completed, but with the request still in
* progress. In theory, 'cannot happen'.
*/
if ((ccb->ccb_h.status & CAM_STATUS_MASK) ==
CAM_REQ_INPROG) {
ccb->ccb_h.status &= ~CAM_STATUS_MASK;
ccb->ccb_h.status |= CAM_REQ_CMP_ERR;
}
xpt_done(ccb);
break;
}
splx(s);
break;
case XPT_EN_LUN: /* Enable LUN as a target */
case XPT_TARGET_IO: /* Execute target I/O request */
case XPT_ACCEPT_TARGET_IO: /* Accept Host Target Mode CDB */
case XPT_CONT_TARGET_IO: /* Continue Host Target I/O Connection*/
ccb->ccb_h.status = CAM_REQ_INVALID;
xpt_done(ccb);
break;
case XPT_RESET_DEV: /* BDR the specified SCSI device */
tgt = ccb->ccb_h.target_id;
s = splcam();
error =
isp_control(isp, ISPCTL_RESET_DEV, (void *)(intptr_t) tgt);
(void) splx(s);
if (error) {
ccb->ccb_h.status = CAM_REQ_CMP_ERR;
} else {
ccb->ccb_h.status = CAM_REQ_CMP;
}
xpt_done(ccb);
break;
case XPT_ABORT: /* Abort the specified CCB */
s = splcam();
error = isp_control(isp, ISPCTL_ABORT_CMD, ccb);
(void) splx(s);
if (error) {
ccb->ccb_h.status = CAM_REQ_CMP_ERR;
} else {
ccb->ccb_h.status = CAM_REQ_CMP;
}
xpt_done(ccb);
break;
case XPT_SET_TRAN_SETTINGS: /* Nexus Settings */
cts = &ccb->cts;
tgt = cts->ccb_h.target_id;
s = splcam();
if (isp->isp_type & ISP_HA_FC) {
; /* nothing to change */
} else {
sdparam *sdp = isp->isp_param;
u_int16_t *dptr;
#if 0
if (cts->flags & CCB_TRANS_CURRENT_SETTINGS)
dptr = &sdp->isp_devparam[tgt].cur_dflags;
else
dptr = &sdp->isp_devparam[tgt].dev_flags;
#else
/*
* We always update (internally) from dev_flags
* so any request to change settings just gets
* vectored to that location.
*/
dptr = &sdp->isp_devparam[tgt].dev_flags;
#endif
/*
* Note that these operations affect the
* the permanent flags (dev_flags)- not
* the current state flags. Then we mark
* things so that the next operation to
* this HBA will cause the update to occur.
*/
if (cts->valid & CCB_TRANS_DISC_VALID) {
if ((cts->flags & CCB_TRANS_DISC_ENB) != 0) {
*dptr |= DPARM_DISC;
} else {
*dptr &= ~DPARM_DISC;
}
}
if (cts->valid & CCB_TRANS_TQ_VALID) {
if ((cts->flags & CCB_TRANS_TAG_ENB) != 0) {
*dptr |= DPARM_TQING;
} else {
*dptr &= ~DPARM_TQING;
}
}
if (cts->valid & CCB_TRANS_BUS_WIDTH_VALID) {
switch (cts->bus_width) {
case MSG_EXT_WDTR_BUS_16_BIT:
*dptr |= DPARM_WIDE;
break;
default:
*dptr &= ~DPARM_WIDE;
}
}
/*
* Any SYNC RATE of nonzero and SYNC_OFFSET
* of nonzero will cause us to go to the
* selected (from NVRAM) maximum value for
* this device. At a later point, we'll
* allow finer control.
*/
if ((cts->valid & CCB_TRANS_SYNC_RATE_VALID) &&
(cts->valid & CCB_TRANS_SYNC_OFFSET_VALID) &&
(cts->sync_offset > 0)) {
*dptr |= DPARM_SYNC;
} else {
*dptr &= ~DPARM_SYNC;
}
IDPRINTF(3, ("%s: target %d new dev_flags 0x%x\n",
isp->isp_name, tgt,
sdp->isp_devparam[tgt].dev_flags));
s = splcam();
sdp->isp_devparam[tgt].dev_update = 1;
isp->isp_update = 1;
(void) isp_control(isp, ISPCTL_UPDATE_PARAMS, NULL);
(void) splx(s);
}
(void) splx(s);
ccb->ccb_h.status = CAM_REQ_CMP;
xpt_done(ccb);
break;
case XPT_GET_TRAN_SETTINGS:
cts = &ccb->cts;
tgt = cts->ccb_h.target_id;
if (isp->isp_type & ISP_HA_FC) {
/*
* a lot of normal SCSI things don't make sense.
*/
cts->flags = CCB_TRANS_TAG_ENB | CCB_TRANS_DISC_ENB;
cts->valid = CCB_TRANS_DISC_VALID | CCB_TRANS_TQ_VALID;
/*
* How do you measure the width of a high
* speed serial bus? Well, in bytes.
*
* Offset and period make no sense, though, so we set
* (above) a 'base' transfer speed to be gigabit.
*/
cts->bus_width = MSG_EXT_WDTR_BUS_8_BIT;
} else {
sdparam *sdp = isp->isp_param;
u_int16_t dval;
if (cts->flags & CCB_TRANS_CURRENT_SETTINGS)
dval = sdp->isp_devparam[tgt].cur_dflags;
else
dval = sdp->isp_devparam[tgt].dev_flags;
s = splcam();
cts->flags &= ~(CCB_TRANS_DISC_ENB|CCB_TRANS_TAG_ENB);
if (dval & DPARM_DISC) {
cts->flags |= CCB_TRANS_DISC_ENB;
}
if (dval & DPARM_TQING) {
cts->flags |= CCB_TRANS_TAG_ENB;
}
if (dval & DPARM_WIDE) {
cts->bus_width = MSG_EXT_WDTR_BUS_16_BIT;
} else {
cts->bus_width = MSG_EXT_WDTR_BUS_8_BIT;
}
cts->valid = CCB_TRANS_BUS_WIDTH_VALID |
CCB_TRANS_DISC_VALID | CCB_TRANS_TQ_VALID;
if ((dval & DPARM_SYNC) &&
(sdp->isp_devparam[tgt].sync_offset)) {
cts->sync_period =
sdp->isp_devparam[tgt].sync_period;
cts->sync_offset =
sdp->isp_devparam[tgt].sync_offset;
cts->valid |=
CCB_TRANS_SYNC_RATE_VALID |
CCB_TRANS_SYNC_OFFSET_VALID;
}
splx(s);
}
ccb->ccb_h.status = CAM_REQ_CMP;
xpt_done(ccb);
break;
case XPT_CALC_GEOMETRY:
{
struct ccb_calc_geometry *ccg;
u_int32_t secs_per_cylinder;
u_int32_t size_mb;
ccg = &ccb->ccg;
if (ccg->block_size == 0) {
printf("%s: %d.%d XPT_CALC_GEOMETRY block size 0?\n",
isp->isp_name, ccg->ccb_h.target_id,
ccg->ccb_h.target_lun);
ccb->ccb_h.status = CAM_REQ_INVALID;
xpt_done(ccb);
break;
}
size_mb = ccg->volume_size /((1024L * 1024L) / ccg->block_size);
if (size_mb > 1024) {
ccg->heads = 255;
ccg->secs_per_track = 63;
} else {
ccg->heads = 64;
ccg->secs_per_track = 32;
}
secs_per_cylinder = ccg->heads * ccg->secs_per_track;
ccg->cylinders = ccg->volume_size / secs_per_cylinder;
ccb->ccb_h.status = CAM_REQ_CMP;
xpt_done(ccb);
break;
}
case XPT_RESET_BUS: /* Reset the specified bus */
if (isp->isp_type & ISP_HA_FC) {
ccb->ccb_h.status = CAM_REQ_CMP;
xpt_done(ccb);
break;
}
s = splcam();
error = isp_control(isp, ISPCTL_RESET_BUS, NULL);
(void) splx(s);
if (error)
ccb->ccb_h.status = CAM_REQ_CMP_ERR;
else
ccb->ccb_h.status = CAM_REQ_CMP;
xpt_done(ccb);
break;
case XPT_TERM_IO: /* Terminate the I/O process */
/* Does this need to be implemented? */
ccb->ccb_h.status = CAM_REQ_INVALID;
xpt_done(ccb);
break;
case XPT_PATH_INQ: /* Path routing inquiry */
{
struct ccb_pathinq *cpi = &ccb->cpi;
cpi->version_num = 1;
cpi->hba_inquiry = PI_SDTR_ABLE|PI_TAG_ABLE|PI_WIDE_16;
cpi->target_sprt = 0;
cpi->hba_misc = 0;
cpi->hba_eng_cnt = 0;
if (isp->isp_type & ISP_HA_FC) {
cpi->max_target = MAX_FC_TARG-1;
cpi->initiator_id =
((fcparam *)isp->isp_param)->isp_loopid;
#ifdef SCCLUN
cpi->max_lun = 65535;
#else
cpi->max_lun = 15;
#endif
} else {
cpi->initiator_id =
((sdparam *)isp->isp_param)->isp_initiator_id;
cpi->max_target = MAX_TARGETS-1;
if (isp->isp_fwrev >= ISP_FW_REV(7, 55)) {
#if 0
/*
* Too much breakage.
*/
cpi->max_lun = 31;
#else
cpi->max_lun = 7;
#endif
} else {
cpi->max_lun = 7;
}
}
cpi->bus_id = cam_sim_bus(sim);
strncpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN);
strncpy(cpi->hba_vid, "Qlogic", HBA_IDLEN);
strncpy(cpi->dev_name, cam_sim_name(sim), DEV_IDLEN);
cpi->unit_number = cam_sim_unit(sim);
cpi->ccb_h.status = CAM_REQ_CMP;
xpt_done(ccb);
break;
}
default:
ccb->ccb_h.status = CAM_REQ_INVALID;
xpt_done(ccb);
break;
}
}
#define ISPDDB (CAM_DEBUG_INFO|CAM_DEBUG_TRACE|CAM_DEBUG_CDB)
void
isp_done(sccb)
struct ccb_scsiio *sccb;
{
struct ispsoftc *isp = XS_ISP(sccb);
if (XS_NOERR(sccb))
XS_SETERR(sccb, CAM_REQ_CMP);
sccb->ccb_h.status &= ~CAM_STATUS_MASK;
sccb->ccb_h.status |= sccb->ccb_h.spriv_field0;
if ((sccb->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_CMP &&
(sccb->scsi_status != SCSI_STATUS_OK)) {
sccb->ccb_h.status &= ~CAM_STATUS_MASK;
sccb->ccb_h.status |= CAM_SCSI_STATUS_ERROR;
}
if ((sccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) {
if ((sccb->ccb_h.status & CAM_DEV_QFRZN) == 0) {
IDPRINTF(3, ("%s: freeze devq %d.%d ccbstat 0x%x\n",
isp->isp_name, sccb->ccb_h.target_id,
sccb->ccb_h.target_lun, sccb->ccb_h.status));
xpt_freeze_devq(sccb->ccb_h.path, 1);
sccb->ccb_h.status |= CAM_DEV_QFRZN;
}
}
if (isp->isp_osinfo.simqfrozen) {
sccb->ccb_h.status |= CAM_RELEASE_SIMQ;
isp->isp_osinfo.simqfrozen = 0;
}
sccb->ccb_h.status &= ~CAM_SIM_QUEUED;
if (CAM_DEBUGGED(sccb->ccb_h.path, ISPDDB) &&
(sccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) {
xpt_print_path(sccb->ccb_h.path);
printf("cam completion status 0x%x\n", sccb->ccb_h.status);
}
xpt_done((union ccb *) sccb);
}
#else
static void ispminphys __P((struct buf *));
static u_int32_t isp_adapter_info __P((int));
static int ispcmd __P((ISP_SCSI_XFER_T *));
static struct scsi_adapter isp_switch = {
ispcmd, ispminphys, 0, 0, isp_adapter_info, "isp", { 0, 0 }
};
static struct scsi_device isp_dev = {
NULL, NULL, NULL, NULL, "isp", 0, { 0, 0 }
};
static int isp_poll __P((struct ispsoftc *, ISP_SCSI_XFER_T *, int));
/*
* Complete attachment of hardware, include subdevices.
*/
void
isp_attach(isp)
struct ispsoftc *isp;
{
struct scsibus_data *scbus;
scbus = scsi_alloc_bus();
if(!scbus) {
return;
}
isp->isp_state = ISP_RUNSTATE;
isp->isp_osinfo._link.adapter_unit = isp->isp_osinfo.unit;
isp->isp_osinfo._link.adapter_softc = isp;
isp->isp_osinfo._link.adapter = &isp_switch;
isp->isp_osinfo._link.device = &isp_dev;
isp->isp_osinfo._link.flags = 0;
if (isp->isp_type & ISP_HA_FC) {
isp->isp_osinfo._link.adapter_targ =
((fcparam *)isp->isp_param)->isp_loopid;
scbus->maxtarg = MAX_FC_TARG-1;
} else {
isp->isp_osinfo._link.adapter_targ =
((sdparam *)isp->isp_param)->isp_initiator_id;
scbus->maxtarg = MAX_TARGETS-1;
}
/*
* Prepare the scsibus_data area for the upperlevel scsi code.
*/
scbus->adapter_link = &isp->isp_osinfo._link;
/*
* ask the adapter what subunits are present
*/
scsi_attachdevs(scbus);
}
/*
* minphys our xfers
*
* Unfortunately, the buffer pointer describes the target device- not the
* adapter device, so we can't use the pointer to find out what kind of
* adapter we are and adjust accordingly.
*/
static void
ispminphys(bp)
struct buf *bp;
{
/*
* Only the 10X0 has a 24 bit limit.
*/
if (bp->b_bcount >= (1 << 24)) {
bp->b_bcount = (1 << 24);
}
}
static u_int32_t
isp_adapter_info(unit)
int unit;
{
/*
* XXX: FIND ISP BASED UPON UNIT AND GET REAL QUEUE LIMIT FROM THAT
*/
return (2);
}
static int
ispcmd(xs)
ISP_SCSI_XFER_T *xs;
{
struct ispsoftc *isp;
int r;
ISP_LOCKVAL_DECL;
isp = XS_ISP(xs);
ISP_LOCK;
r = ispscsicmd(xs);
if (r != CMD_QUEUED || (xs->flags & SCSI_NOMASK) == 0) {
ISP_UNLOCK;
return (r);
}
/*
* If we can't use interrupts, poll on completion.
*/
if (isp_poll(isp, xs, XS_TIME(xs))) {
/*
* If no other error occurred but we didn't finish,
* something bad happened.
*/
if (XS_IS_CMD_DONE(xs) == 0) {
isp->isp_nactive--;
if (isp->isp_nactive < 0)
isp->isp_nactive = 0;
if (XS_NOERR(xs)) {
isp_lostcmd(isp, xs);
XS_SETERR(xs, HBA_BOTCH);
}
}
}
ISP_UNLOCK;
return (CMD_COMPLETE);
}
static int
isp_poll(isp, xs, mswait)
struct ispsoftc *isp;
ISP_SCSI_XFER_T *xs;
int mswait;
{
while (mswait) {
/* Try the interrupt handling routine */
(void)isp_intr((void *)isp);
/* See if the xs is now done */
if (XS_IS_CMD_DONE(xs))
return (0);
SYS_DELAY(1000); /* wait one millisecond */
mswait--;
}
return (1);
}
#endif
Reference in New Issue View Git Blame Copy Permalink