1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-24 11:29:10 +00:00
freebsd/sys/i386/isa/gscreg.h
Jordan K. Hubbard 2f6df2645b Gunther Schadow <gusw@fub46.zedat.fu-berlin.de>'s
driver for the Genius GS-4500 hand scanner.
Submitted by:	gusw@fub46.zedat.fu-berlin.de
1995-01-07 14:52:08 +00:00

88 lines
2.8 KiB
C

/* gscreg.h - port and bit definitions for the Genius GS-4500 interface
*
*
* Copyright (c) 1995 Gunther Schadow. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Gunther Schadow.
* 4. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/*
* status register (r)
*/
/* the DMA/IRQ jumper configuration */
#define GSC_CNF_MASK 0x5a
#define GSC_CNF_DMA1 (~0x02 & GSC_CNF_MASK)
#define GSC_CNF_DMA3 (~0x08 & GSC_CNF_MASK)
#define GSC_CNF_IRQ3 (~0x10 & GSC_CNF_MASK)
#define GSC_CNF_IRQ5 (~0x40 & GSC_CNF_MASK)
/* the resolution switch setting */
#define GSC_RES_MASK 0x24
#define GSC_RES_400 0x00
#define GSC_RES_300 0x04
#define GSC_RES_200 0x20
#define GSC_RES_100 0x24
/* other flags */
#define GSC_RDY_FLAG 0x80
#define GSC_IRQ_FLAG 0x01
/*
* control register (w)
*/
/* power on */
#define GSC_POWER_ON 0x01
/* pixel per line count */
#define GSC_CNT_MASK 0xf0
#define GSC_CNT_3648 0x30
#define GSC_CNT_2544 0x90
#define GSC_CNT_1696 0xb0
#define GSC_CNT_1648 0xe0
#define GSC_CNT_1264 0x80
#define GSC_CNT_840 0xa0
#define GSC_CNT_424 0xf0
/*
* port addresses
*/
#define GSC_DATA(iob) (iob + (iob == 0x270 ? 0x02 : 0x01))
#define GSC_STAT(iob) (iob + (iob == 0x270 ? 0x03 : 0x02))
#define GSC_CTRL(iob) (iob + (iob == 0x270 ? 0x0a : 0x03))
#define GSC_CLRP(iob) (iob + (iob == 0x270 ? 0x0b : 0x04))