1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-28 11:57:28 +00:00
freebsd/share/man/man4/ukbd.4
Christian Brueffer 0a771a3be7 Use our standard section 4 SYNOPSIS.
MFC after:	3 days
2006-11-22 21:30:02 +00:00

175 lines
5.1 KiB
Groff

.\" Copyright (c) 1997, 1998
.\" Nick Hibma <n_hibma@FreeBSD.org>. All rights reserved.
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\" notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\" notice, this list of conditions and the following disclaimer in the
.\" documentation and/or other materials provided with the distribution.
.\" 3. Neither the name of the author nor the names of any co-contributors
.\" may be used to endorse or promote products derived from this software
.\" without specific prior written permission.
.\"
.\" THIS SOFTWARE IS PROVIDED BY NICK HIBMA AND CONTRIBUTORS ``AS IS'' AND
.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
.\" ARE DISCLAIMED. IN NO EVENT SHALL NICK HIBMA OR THE VOICES IN HIS HEAD
.\" BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
.\" CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
.\" SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
.\" INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
.\" CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
.\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
.\" THE POSSIBILITY OF SUCH DAMAGE.
.\"
.\" $FreeBSD$
.\"
.Dd November 22, 2006
.Dt UKBD 4
.Os
.Sh NAME
.Nm ukbd
.Nd USB keyboard driver
.Sh SYNOPSIS
To compile this driver into the kernel,
place the following line in your
kernel configuration file:
.Bd -ragged -offset indent
.Cd "device ukbd"
.Ed
.Pp
Alternatively, to load the driver as a
module at boot time, place the following line in
.Xr loader.conf 5 :
.Bd -literal -offset indent
ukbd_load="YES"
.Ed
.Sh DESCRIPTION
The
.Nm
driver provides support for keyboards that attach to the USB port.
.Xr usb 4
and one of
.Xr uhci 4
or
.Xr ohci 4
must be configured in the kernel as well.
.Sh CONFIGURATION
By default, the keyboard subsystem does not create the appropriate devices yet.
Make sure you reconfigure your kernel with the following option in the kernel
config file:
.Pp
.Dl "options KBD_INSTALL_CDEV"
.Pp
If both an AT keyboard USB keyboards are used at the same time, the
AT keyboard will appear as
.Pa kbd0
in
.Pa /dev .
The USB keyboards will be
.Pa kbd1 , kbd2 ,
etc.
You can see some information about the keyboard with the following command:
.Pp
.Dl "kbdcontrol -i < /dev/kbd1"
.Pp
or load a keymap with
.Pp
.Dl "kbdcontrol -l keymaps/pt.iso < /dev/kbd1"
.Pp
See
.Xr kbdcontrol 1
for more possible options.
.Pp
You can swap console keyboards by using the command
.Pp
.Dl "kbdcontrol -k /dev/kbd1"
.Pp
From this point on, the first USB keyboard will be the keyboard
to be used by the console.
.Pp
If you want to use a USB keyboard as your default and not use an AT keyboard at
all, you will have to remove the
.Cd "device atkbd"
line from the kernel configuration file.
Because of the device initialization order,
the USB keyboard will be detected
.Em after
the console driver
initializes itself and you have to explicitly tell the console
driver to use the existence of the USB keyboard.
This can be done in
one of the following two ways.
.Pp
Run the following command as a part of system initialization:
.Pp
.Dl "kbdcontrol -k /dev/kbd0 < /dev/ttyv0 > /dev/null"
.Pp
(Note that as the USB keyboard is the only keyboard, it is accessed as
.Pa /dev/kbd0 )
or otherwise tell the console driver to periodically look for a
keyboard by setting a flag in the kernel configuration file:
.Pp
.Dl "device sc0 at isa? flags 0x100"
.Pp
With the above flag, the console driver will try to detect any
keyboard in the system if it did not detect one while it was
initialized at boot time.
.Sh DRIVER CONFIGURATION
.D1 Cd "options KBD_INSTALL_CDEV"
.Pp
Make the keyboards available through a character device in
.Pa /dev .
.Pp
.D1 Cd options UKBD_DFLT_KEYMAP
.D1 Cd makeoptions UKBD_DFLT_KEYMAP=fr.iso
.Pp
The above lines will put the French ISO keymap in the ukbd driver.
You can specify any keymap in
.Pa /usr/share/syscons/keymaps
with this option.
.Pp
.D1 Cd "options KBD_DISABLE_KEYMAP_LOADING"
.Pp
Do not allow the user to change the keymap.
Note that these options also affect the AT keyboard driver,
.Xr atkbd 4 .
.Sh FILES
.Bl -tag -width ".Pa /dev/kbd*" -compact
.It Pa /dev/kbd*
blocking device nodes
.El
.Sh EXAMPLES
.D1 Cd "device ukbd"
.Pp
Add the
.Nm
driver to the kernel.
.Sh SEE ALSO
.Xr kbdcontrol 1 ,
.Xr ohci 4 ,
.Xr syscons 4 ,
.Xr uhci 4 ,
.Xr usb 4 ,
.Xr config 8
.Sh AUTHORS
.An -nosplit
The
.Nm
driver was written by
.An Lennart Augustsson Aq augustss@cs.chalmers.se
for
.Nx
and was substantially rewritten for
.Fx
by
.An Kazutaka YOKOTA Aq yokota@zodiac.mech.utsunomiya-u.ac.jp .
.Pp
This manual page was written by
.An Nick Hibma Aq n_hibma@FreeBSD.org
with a large amount of input from
.An Kazutaka YOKOTA Aq yokota@zodiac.mech.utsunomiya-u.ac.jp .