mirror of
https://git.FreeBSD.org/src.git
synced 2024-12-24 11:29:10 +00:00
501 lines
14 KiB
C
501 lines
14 KiB
C
/*
|
|
* refclock_atom - clock driver for 1-pps signals
|
|
*/
|
|
#ifdef HAVE_CONFIG_H
|
|
#include <config.h>
|
|
#endif
|
|
|
|
#include <stdio.h>
|
|
#include <ctype.h>
|
|
|
|
#include "ntpd.h"
|
|
#include "ntp_io.h"
|
|
#include "ntp_unixtime.h"
|
|
#include "ntp_refclock.h"
|
|
#include "ntp_stdlib.h"
|
|
|
|
#if defined(REFCLOCK) && defined(CLOCK_ATOM)
|
|
|
|
#ifdef HAVE_PPSAPI
|
|
# ifdef HAVE_TIMEPPS_H
|
|
# include <timepps.h>
|
|
# else
|
|
# ifdef HAVE_SYS_TIMEPPS_H
|
|
# include <sys/timepps.h>
|
|
# endif
|
|
# endif
|
|
#endif /* HAVE_PPSAPI */
|
|
|
|
/*
|
|
* This driver furnishes an interface for pulse-per-second (PPS) signals
|
|
* produced by a cesium clock, timing receiver or related equipment. It
|
|
* can be used to remove accumulated jitter and retime a secondary
|
|
* server when synchronized to a primary server over a congested, wide-
|
|
* area network and before redistributing the time to local clients.
|
|
*
|
|
* Before this driver becomes active, the local clock must be set to
|
|
* within +-500 ms by another means, such as a radio clock or NTP
|
|
* itself. There are two ways to connect the PPS signal, normally at TTL
|
|
* levels, to the computer. One is to shift to EIA levels and connect to
|
|
* pin 8 (DCD) of a serial port. This requires a level converter and
|
|
* may require a one-shot flipflop to lengthen the pulse. The other is
|
|
* to connect the PPS signal directly to pin 10 (ACK) of a PC paralell
|
|
* port. These methods are architecture dependent.
|
|
*
|
|
* Both methods require a modified device driver and kernel interface
|
|
* compatible with the Pulse-per-Second API for Unix-like Operating
|
|
* Systems, Version 1.0, RFC-2783 (PPSAPI). Implementations are
|
|
* available for FreeBSD, Linux, SunOS, Solaris and Alpha. However, at
|
|
* present only the Alpha implementation provides the full generality of
|
|
* the API with multiple PPS drivers and multiple handles per driver.
|
|
*
|
|
* In many configurations a single port is used for the radio timecode
|
|
* and PPS signal. In order to provide for this configuration and others
|
|
* involving dedicated multiple serial/parallel ports, the driver first
|
|
* attempts to open the device /dev/pps%d, where %d is the unit number.
|
|
* If this fails, the driver attempts to open the device specified by
|
|
* the pps configuration command. If a port is to be shared, the pps
|
|
* command must be placed before the radio device(s) and the radio
|
|
* device(s) must be placed before the PPS driver(s) in the
|
|
* configuration file.
|
|
*
|
|
* This driver normally uses the PLL/FLL clock discipline implemented in
|
|
* the ntpd code. If kernel support is available, the kernel PLL/FLL
|
|
* clock discipline is used instead. The default configuration is not to
|
|
* use the kernel PPS discipline, if present. The kernel PPS discipline
|
|
* can be enabled using the pps command.
|
|
*
|
|
* Fudge Factors
|
|
*
|
|
* There are no special fudge factors other than the generic. The fudge
|
|
* time1 parameter can be used to compensate for miscellaneous device
|
|
* driver and OS delays.
|
|
*/
|
|
/*
|
|
* Interface definitions
|
|
*/
|
|
#ifdef HAVE_PPSAPI
|
|
extern int pps_assert; /* selects rising or falling edge */
|
|
extern int pps_hardpps; /* enables the kernel PPS interface */
|
|
#define DEVICE "/dev/pps%d" /* device name and unit */
|
|
#endif /* HAVE_PPSAPI */
|
|
|
|
#define PRECISION (-20) /* precision assumed (about 1 us) */
|
|
#define REFID "PPS\0" /* reference ID */
|
|
#define DESCRIPTION "PPS Clock Discipline" /* WRU */
|
|
#define NANOSECOND 1000000000 /* one second (ns) */
|
|
#define RANGEGATE 500000 /* range gate (ns) */
|
|
#define ASTAGE 8 /* filter stages */
|
|
|
|
static struct peer *pps_peer; /* atom driver for PPS sources */
|
|
|
|
#ifdef HAVE_PPSAPI
|
|
/*
|
|
* PPS unit control structure
|
|
*/
|
|
struct ppsunit {
|
|
struct timespec ts; /* last timestamp */
|
|
int fddev; /* pps device descriptor */
|
|
pps_params_t pps_params; /* pps parameters */
|
|
pps_info_t pps_info; /* last pps data */
|
|
pps_handle_t handle; /* pps handlebars */
|
|
};
|
|
#endif /* HAVE_PPSAPI */
|
|
|
|
/*
|
|
* Function prototypes
|
|
*/
|
|
static int atom_start P((int, struct peer *));
|
|
static void atom_poll P((int, struct peer *));
|
|
#ifdef HAVE_PPSAPI
|
|
static void atom_shutdown P((int, struct peer *));
|
|
static void atom_control P((int, struct refclockstat *, struct
|
|
refclockstat *, struct peer *));
|
|
static int atom_pps P((struct peer *));
|
|
static int atom_ppsapi P((struct peer *, int, int));
|
|
#endif /* HAVE_PPSAPI */
|
|
|
|
/*
|
|
* Transfer vector
|
|
*/
|
|
struct refclock refclock_atom = {
|
|
atom_start, /* start up driver */
|
|
#ifdef HAVE_PPSAPI
|
|
atom_shutdown, /* shut down driver */
|
|
#else
|
|
noentry, /* shut down driver */
|
|
#endif /* HAVE_PPSAPI */
|
|
atom_poll, /* transmit poll message */
|
|
#ifdef HAVE_PPSAPI
|
|
atom_control, /* fudge control */
|
|
#else
|
|
noentry, /* fudge control */
|
|
#endif /* HAVE_PPSAPI */
|
|
noentry, /* initialize driver */
|
|
noentry, /* not used (old atom_buginfo) */
|
|
NOFLAGS /* not used */
|
|
};
|
|
|
|
|
|
/*
|
|
* atom_start - initialize data for processing
|
|
*/
|
|
static int
|
|
atom_start(
|
|
int unit, /* unit number (not used) */
|
|
struct peer *peer /* peer structure pointer */
|
|
)
|
|
{
|
|
struct refclockproc *pp;
|
|
#ifdef HAVE_PPSAPI
|
|
register struct ppsunit *up;
|
|
char device[80];
|
|
#endif /* HAVE_PPSAPI */
|
|
|
|
/*
|
|
* Allocate and initialize unit structure
|
|
*/
|
|
pps_peer = peer;
|
|
pp = peer->procptr;
|
|
peer->precision = PRECISION;
|
|
pp->clockdesc = DESCRIPTION;
|
|
memcpy((char *)&pp->refid, REFID, 4);
|
|
peer->burst = ASTAGE;
|
|
peer->stratum = STRATUM_UNSPEC;
|
|
#ifdef HAVE_PPSAPI
|
|
up = emalloc(sizeof(struct ppsunit));
|
|
memset(up, 0, sizeof(struct ppsunit));
|
|
pp->unitptr = (caddr_t)up;
|
|
|
|
/*
|
|
* Open PPS device. If this fails and some driver has already
|
|
* opened the associated radio device, fdpps has the file
|
|
* descriptor for it.
|
|
*/
|
|
sprintf(device, DEVICE, unit);
|
|
up->fddev = open(device, O_RDWR, 0777);
|
|
if (up->fddev <= 0 && fdpps > 0) {
|
|
strcpy(device, pps_device);
|
|
up->fddev = fdpps;
|
|
}
|
|
if (up->fddev <= 0) {
|
|
msyslog(LOG_ERR,
|
|
"refclock_atom: %s: %m", device);
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Light off the PPSAPI interface. If this PPS device is shared
|
|
* with the radio device, take the default options from the pps
|
|
* command. This is for legacy purposes.
|
|
*/
|
|
if (time_pps_create(up->fddev, &up->handle) < 0) {
|
|
msyslog(LOG_ERR,
|
|
"refclock_atom: time_pps_create failed: %m");
|
|
return (0);
|
|
}
|
|
return (atom_ppsapi(peer, pps_assert, pps_hardpps));
|
|
#else /* HAVE_PPSAPI */
|
|
return (1);
|
|
#endif /* HAVE_PPSAPI */
|
|
}
|
|
|
|
|
|
#ifdef HAVE_PPSAPI
|
|
/*
|
|
* atom_control - fudge control
|
|
*/
|
|
static void
|
|
atom_control(
|
|
int unit, /* unit (not used */
|
|
struct refclockstat *in, /* input parameters (not uded) */
|
|
struct refclockstat *out, /* output parameters (not used) */
|
|
struct peer *peer /* peer structure pointer */
|
|
)
|
|
{
|
|
struct refclockproc *pp;
|
|
|
|
pp = peer->procptr;
|
|
atom_ppsapi(peer, pp->sloppyclockflag & CLK_FLAG2,
|
|
pp->sloppyclockflag & CLK_FLAG3);
|
|
}
|
|
|
|
|
|
/*
|
|
* Initialize PPSAPI
|
|
*/
|
|
int
|
|
atom_ppsapi(
|
|
struct peer *peer, /* peer structure pointer */
|
|
int enb_clear, /* clear enable */
|
|
int enb_hardpps /* hardpps enable */
|
|
)
|
|
{
|
|
struct refclockproc *pp;
|
|
register struct ppsunit *up;
|
|
int capability;
|
|
|
|
pp = peer->procptr;
|
|
up = (struct ppsunit *)pp->unitptr;
|
|
if (time_pps_getcap(up->handle, &capability) < 0) {
|
|
msyslog(LOG_ERR,
|
|
"refclock_atom: time_pps_getcap failed: %m");
|
|
return (0);
|
|
}
|
|
memset(&up->pps_params, 0, sizeof(pps_params_t));
|
|
if (enb_clear)
|
|
up->pps_params.mode = capability & PPS_CAPTURECLEAR;
|
|
else
|
|
up->pps_params.mode = capability & PPS_CAPTUREASSERT;
|
|
if (!up->pps_params.mode) {
|
|
msyslog(LOG_ERR,
|
|
"refclock_atom: invalid capture edge %d",
|
|
pps_assert);
|
|
return (0);
|
|
}
|
|
up->pps_params.mode |= PPS_TSFMT_TSPEC;
|
|
if (time_pps_setparams(up->handle, &up->pps_params) < 0) {
|
|
msyslog(LOG_ERR,
|
|
"refclock_atom: time_pps_setparams failed: %m");
|
|
return (0);
|
|
}
|
|
if (enb_hardpps) {
|
|
if (time_pps_kcbind(up->handle, PPS_KC_HARDPPS,
|
|
up->pps_params.mode & ~PPS_TSFMT_TSPEC,
|
|
PPS_TSFMT_TSPEC) < 0) {
|
|
msyslog(LOG_ERR,
|
|
"refclock_atom: time_pps_kcbind failed: %m");
|
|
return (0);
|
|
}
|
|
pps_enable = 1;
|
|
}
|
|
#if DEBUG
|
|
if (debug) {
|
|
time_pps_getparams(up->handle, &up->pps_params);
|
|
printf(
|
|
"refclock_ppsapi: fd %d capability 0x%x version %d mode 0x%x kern %d\n",
|
|
up->fddev, capability, up->pps_params.api_version,
|
|
up->pps_params.mode, enb_hardpps);
|
|
}
|
|
#endif
|
|
return (1);
|
|
}
|
|
|
|
|
|
/*
|
|
* atom_shutdown - shut down the clock
|
|
*/
|
|
static void
|
|
atom_shutdown(
|
|
int unit, /* unit number (not used) */
|
|
struct peer *peer /* peer structure pointer */
|
|
)
|
|
{
|
|
struct refclockproc *pp;
|
|
register struct ppsunit *up;
|
|
|
|
pp = peer->procptr;
|
|
up = (struct ppsunit *)pp->unitptr;
|
|
if (up->fddev > 0)
|
|
close(up->fddev);
|
|
if (up->handle != 0)
|
|
time_pps_destroy(up->handle);
|
|
if (pps_peer == peer)
|
|
pps_peer = 0;
|
|
free(up);
|
|
}
|
|
|
|
|
|
/*
|
|
* atom_pps - receive data from the PPSAPI interface
|
|
*
|
|
* This routine is called once per second when the PPSAPI interface is
|
|
* present. It snatches the PPS timestamp from the kernel and saves the
|
|
* sign-extended fraction in a circular buffer for processing at the
|
|
* next poll event.
|
|
*/
|
|
static int
|
|
atom_pps(
|
|
struct peer *peer /* peer structure pointer */
|
|
)
|
|
{
|
|
register struct ppsunit *up;
|
|
struct refclockproc *pp;
|
|
pps_info_t pps_info;
|
|
struct timespec timeout, ts;
|
|
double dtemp;
|
|
|
|
/*
|
|
* Convert the timespec nanoseconds field to signed double and
|
|
* save in the median filter. for billboards. No harm is done if
|
|
* previous data are overwritten. If the discipline comes bum or
|
|
* the data grow stale, just forget it. A range gate rejects new
|
|
* samples if less than a jiggle time from the next second.
|
|
*/
|
|
pp = peer->procptr;
|
|
up = (struct ppsunit *)pp->unitptr;
|
|
if (up->handle == 0)
|
|
return (-1);
|
|
timeout.tv_sec = 0;
|
|
timeout.tv_nsec = 0;
|
|
memcpy(&pps_info, &up->pps_info, sizeof(pps_info_t));
|
|
if (time_pps_fetch(up->handle, PPS_TSFMT_TSPEC, &up->pps_info,
|
|
&timeout) < 0)
|
|
return (-1);
|
|
if (up->pps_params.mode & PPS_CAPTUREASSERT) {
|
|
if (pps_info.assert_sequence ==
|
|
up->pps_info.assert_sequence)
|
|
return (1);
|
|
ts = up->pps_info.assert_timestamp;
|
|
} else if (up->pps_params.mode & PPS_CAPTURECLEAR) {
|
|
if (pps_info.clear_sequence ==
|
|
up->pps_info.clear_sequence)
|
|
return (1);
|
|
ts = up->pps_info.clear_timestamp;
|
|
} else {
|
|
return (-1);
|
|
}
|
|
if (!((ts.tv_sec == up->ts.tv_sec && ts.tv_nsec -
|
|
up->ts.tv_nsec > NANOSECOND - RANGEGATE) ||
|
|
(ts.tv_sec - up->ts.tv_sec == 1 && ts.tv_nsec -
|
|
up->ts.tv_nsec < RANGEGATE))) {
|
|
up->ts = ts;
|
|
return (1);
|
|
}
|
|
up->ts = ts;
|
|
pp->lastrec.l_ui = ts.tv_sec + JAN_1970;
|
|
dtemp = ts.tv_nsec * FRAC / 1e9;
|
|
if (dtemp >= FRAC)
|
|
pp->lastrec.l_ui++;
|
|
pp->lastrec.l_uf = (u_int32)dtemp;
|
|
if (ts.tv_nsec > NANOSECOND / 2)
|
|
ts.tv_nsec -= NANOSECOND;
|
|
dtemp = -(double)ts.tv_nsec / NANOSECOND;
|
|
SAMPLE(dtemp + pp->fudgetime1);
|
|
#ifdef DEBUG
|
|
if (debug > 1)
|
|
printf("atom_pps %f %f\n", dtemp, pp->fudgetime1);
|
|
#endif
|
|
return (0);
|
|
}
|
|
#endif /* HAVE_PPSAPI */
|
|
|
|
|
|
/*
|
|
* pps_sample - receive PPS data from some other clock driver
|
|
*
|
|
* This routine is called once per second when the external clock driver
|
|
* processes PPS information. It processes the PPS timestamp and saves
|
|
* the sign-extended fraction in a circular buffer for processing at the
|
|
* next poll event. This works only for a single PPS device.
|
|
*/
|
|
int
|
|
pps_sample(
|
|
l_fp *offset /* PPS offset */
|
|
)
|
|
{
|
|
register struct peer *peer;
|
|
struct refclockproc *pp;
|
|
l_fp lftmp;
|
|
double doffset;
|
|
|
|
peer = pps_peer;
|
|
if (peer == 0) /* nobody home */
|
|
return (1);
|
|
pp = peer->procptr;
|
|
|
|
/*
|
|
* Convert the timeval to l_fp and save for billboards. Sign-
|
|
* extend the fraction and stash in the buffer. No harm is done
|
|
* if previous data are overwritten. If the discipline comes bum
|
|
* or the data grow stale, just forget it.
|
|
*/
|
|
pp->lastrec = *offset;
|
|
L_CLR(&lftmp);
|
|
L_ADDF(&lftmp, pp->lastrec.l_f);
|
|
LFPTOD(&lftmp, doffset);
|
|
SAMPLE(-doffset + pp->fudgetime1);
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* atom_poll - called by the transmit procedure
|
|
*
|
|
* This routine is called once per second when in burst mode to save PPS
|
|
* sample offsets in the median filter. At the end of the burst period
|
|
* the samples are processed as a heap and the clock filter updated.
|
|
*/
|
|
static void
|
|
atom_poll(
|
|
int unit, /* unit number (not used) */
|
|
struct peer *peer /* peer structure pointer */
|
|
)
|
|
{
|
|
struct refclockproc *pp;
|
|
#ifdef HAVE_PPSAPI
|
|
int err;
|
|
#endif /* HAVE_PPSAPI */
|
|
|
|
/*
|
|
* Accumulate samples in the median filter. If a noise sample,
|
|
* return with no prejudice; if a protocol error, get mean;
|
|
* otherwise, cool. At the end of each poll interval, do a
|
|
* little bookeeping and process the surviving samples.
|
|
*/
|
|
pp = peer->procptr;
|
|
pp->polls++;
|
|
#ifdef HAVE_PPSAPI
|
|
err = atom_pps(peer);
|
|
if (err < 0) {
|
|
refclock_report(peer, CEVNT_FAULT);
|
|
return;
|
|
}
|
|
#endif /* HAVE_PPSAPI */
|
|
|
|
/*
|
|
* Valid time is returned only if the prefer peer has survived
|
|
* the intersection algorithm and within clock_max of local time
|
|
* and not too long ago. This ensures the PPS time is within
|
|
* +-0.5 s of the local time and the seconds numbering is
|
|
* unambiguous. Note that the leap bits are set no-warning on
|
|
* the first valid update and the stratum is set at the prefer
|
|
* peer.
|
|
*/
|
|
if (peer->burst > 0)
|
|
return;
|
|
peer->stratum = STRATUM_UNSPEC;
|
|
if (pp->codeproc == pp->coderecv) {
|
|
refclock_report(peer, CEVNT_TIMEOUT);
|
|
peer->burst = ASTAGE;
|
|
return;
|
|
|
|
} else if (!sys_prefer) {
|
|
pp->codeproc = pp->coderecv;
|
|
peer->burst = ASTAGE;
|
|
return;
|
|
|
|
} else if (fabs(sys_prefer->offset) > clock_max) {
|
|
pp->codeproc = pp->coderecv;
|
|
peer->burst = ASTAGE;
|
|
return;
|
|
}
|
|
peer->stratum = sys_prefer->stratum;
|
|
if (peer->stratum <= 1)
|
|
peer->refid = pp->refid;
|
|
else
|
|
peer->refid = peer->srcadr.sin_addr.s_addr;
|
|
pp->leap = LEAP_NOWARNING;
|
|
refclock_receive(peer);
|
|
peer->burst = ASTAGE;
|
|
}
|
|
#else
|
|
int refclock_atom_bs;
|
|
int
|
|
pps_sample(
|
|
l_fp *offset /* PPS offset */
|
|
)
|
|
{
|
|
return 1;
|
|
}
|
|
#endif /* REFCLOCK */
|