Navdeep Parhar d94b89b915 cxgbe(4): Update T5 and T4 firmwares bundled with the driver to 1.14.4.0. The ... changes in the firmwares since 1.11.27.0 are listed here (straight copy-paste from the "Release Notes.txt" accompanying the Chelsio Unified Wire 2.11.1.0 release on the website). 22.1. T5 Firmware +++++++++++++++++++++++++++++++++ Version : 1.14.4.0 Date : 08/05/2015 ================================================================================ FIXES ----- BASE: - Fixes a potential data path hang by properly programming PMTX congestion threshold settings. - Fixes a potential initialization error when accessing a configuration file stored on the flash. - Fixes a regression where SGE resources can be miss-sized if iWARP is disabled. ETH: - Fixes a timing issue that would prevent CR4 links from coming up with some switches. FOFCoE: - Defers fcoe linkdown mailbox command handling till LOGO is sent. - Updates vlan prio for all outstanding IOs during dcbx update. ENHANCEMENTS ------------ BASE: - Adds support for PAUSE OFF watchdog. - Reports devlog access information in PCIE_FW_PF register 7. ETH: - Enhances segmentation offload to include VxLAN and Geneve. - Adds PTP support. - Adds new interface to allow the driver to query the VI rss table base addresses. - Allows the driver to program the SGE ingrext contxt CongDrop field. OFLD: - Adds new interface for the driver to specify offloaded connections TCP snd and rcv scale factors. iSCSI: - Adds support for iscsi segmentatation offload (ISO). - Adds support for iscsi t10-dif offload. FOiSCSI: - Sets FORCE_BIT for cut through processing for FOiSCSI. FOFCoE: - Adds support for FCoE BB6. - Improves WRITE performance. ================================================================================ ================================================================================ Version : 1.13.32.0 Date : 03/25/2015 ================================================================================ FIXES ----- BASE: - Fixes FW_CAPS_CONFIG_CMD return value on error (was positive instead of negative) - Fixes FW_PARAMS_PARAM_DEV_FLOWC_BUFFIFO_SZ indication (was wrong on certain adapter configurations) - Fixes config file based PL_TIMEOUT register programming ETH: - Fixes a potential EO UDP SEG header corruption - Fixes an issue where 1000Base-X was not enabled correctly when using QSA modules OFLD: - Fixes timeout issue with half-open connections - Fixes FW_FLOWC_WR processing when state is set to finwait1 FOFCoE: - Fixes fcoe xchg leaks in linkdown/peer down path - Fixes cleanup in FCoE linkdown and fixed buf timer flowid abuse - Fixes fw crash by clearing fcf flowc during bye FOiSCSI: - Don't create a new tcp socket if ERL0 attempt has timed out. ENHANCEMENTS ------------ BASE: - Adds support for VFs on PFs 4 to 7 - Adds support for QPs/CQs on any physical and virtual function ETH: - Stops sending LACP frames on loopback interface - Adds an AUTOEQU indication to CPL_SGE_EGR_UPDATE - Adds support for CR4 links (BEAN/AEC on 40G TwinAx cables) OFLD: - Improves default settings of LAN and CLUSTER TCP timer settings - Sends Negative Advice CPLs to software FOISCSI: - Adds IPv6 support for foiscsi. Keeps backward compatibility with old foiscsi drivers which doesn't support ipv6. FOFCoE: - Added fcoe debug support in flowc dump ================================================================================ ================================================================================ Version : 1.12.25.0 Date : 10/22/2014 ================================================================================ FIXES ----- BASE: - Improves precision of the Weight Round Robing Traffic Management Algorithm - Fixes an issue where the link would intermittently fail to come up - Fixes an issue where adapters with an external PHY couldn't run at 100Mbps - Fixes an issue where active optical cables were not recognized - Fixes link advertising issues on T520-BT (speed and pause frames) that would cause the link to negotiate unexpected settings - Forces link restart when auto-negotiation is disabled - Fix an issue where pause frames wouldn't be fully disabled even if requested ETH: - Fixes NVGRE Segmentation Offload network header generation. DCBX: - Fixes an issue where some settings were not being sent to the switch correctly - Fixes an issue where back-to-back DCBX port updates could get overwritten by FW - Fixes a firmware crash on DCBX APP information request before link up FOiSCSI: - Fixes abort task leak in tmf response handling - Fixes TCP RST handling while in iSCSI ERL0 - Fixes a firmware crash on BYE without INIT ENHANCEMENTS ------------- BASE: - Adds link partner settings reporting when available - Adds QSA support (in conjunction with QSA VPD) - Adds T520-BT LED support - Reports NOTSUPPORTED for modules with an unhandled identifier DCBX: - Adds version reporting (indicating which version FW is trying to negotiate) - Adds IEEE support - Reports LLDP time outs FOiSCSI: - Add support for multiple iSCSI DDP client - Sends DHCP renew request when lease expires ================================================================================ 22.2. T4 Firmware +++++++++++++++++ Version : 1.14.4.0 Date : 08/05/2015 ================================================================================ FIXES ----- BASE: - Fixes a potential initialization error when accessing a configuration file stored on the flash. - Initialize PCIE_DBG_INDIR_REQ.Enable to 0, as hardware failed to do so and register dumps could result in errors. ETH: - Fixes an issue that sometimes prevented the link from coming up in CR adapters. ENHANCEMENTS ------------ BASE: - Adds support for PAUSE OFF watchdog. - Reports devlog access information in PCIE_FW_PF register 7. ETH: - Adds new interface to allow the driver to query the VI rss table base addresses. OFLD: - Adds new interface for the driver to specify offloaded connections TCP snd and rcv scale factors. ================================================================================ ================================================================================ Version : 1.13.32.0 Date : 03/25/2015 ================================================================================ FIXES ----- BASE: - Fixes FW_CAPS_CONFIG_CMD return value on error (was positive instead of negative) - Fixes FW_PARAMS_PARAM_DEV_FLOWC_BUFFIFO_SZ indication (was wrong on certain adapter configurations) - Fixes config file based PL_TIMEOUT register programming ETH: - Fixes a potential EO UDP SEG header corruption OFLD: - Fixes timeout issue with half-open connections - Fixes FW_FLOWC_WR processing when state is set to finwait1 FOiSCSI: - Don't create a new tcp socket if ERL0 attempt has timed out. ENHANCEMENTS ------------ ETH: - Stops sending LACP frames on loopback interface - Adds an AUTOEQU indication to CPL_SGE_EGR_UPDATE OFLD: - Improves default settings of LAN and CLUSTER TCP timer settings - Sends Negative Advice CPLs to software ================================================================================ ================================================================================ Version : 1.12.25.0 Date : 10/22/2014 ================================================================================ FIXES ----- BASE: - Improves precision of the Weight Round Robing Traffic Management Algorithm - Forces link restart when auto-negotiation is disabled - Fix an issue where pause frames wouldn't be fully disabled even if requested DCBX: - Fixes an issue where some settings were not being sent to the switch correctly - Fixes an issue where back-to-back DCBX port updates could get overwritten by FW - Fixes a firmware crash on DCBX APP information request before link up FOiSCSI: - Fixes abort task leak in tmf response handling - Fixes TCP RST handling while in iSCSI ERL0 - Fixes a firmware crash on BYE without INIT ENHANCEMENTS ------------ BASE: - Adds link partner settings reporting when available - Firmware now reports NOTSUPPORTED for modules with an unhandled identifier DCBX: - Adds version reporting (indicating which version FW is trying to negotiate) - Adds IEEE support - Reports LLDP time outs FOiSCSI: - Adds support for multiple iSCSI DDP clients - Sends DHCP renew request when lease expires ================================================================================ Obtained from: Chelsio Communications MFC after: 2 weeks Sponsored by: Chelsio Communications		2015-08-05 19:45:11 +00:00
..
if_cxgbe	Globally enable -fms-extensions when building kernel with gcc, and remove	2015-02-17 19:27:14 +00:00
if_cxl	cxgbe(4): Add a minimal if_cxl module that pulls in the real driver as	2015-02-06 01:10:04 +00:00
iw_cxgbe	Move most of the 15 variations on generating opt_inet.h and	2014-08-04 22:37:02 +00:00
t4_firmware	cxgbe(4): Update T5 and T4 firmwares bundled with the driver to 1.14.4.0. The	2015-08-05 19:45:11 +00:00
t5_firmware	cxgbe(4): Update T5 and T4 firmwares bundled with the driver to 1.14.4.0. The	2015-08-05 19:45:11 +00:00
tom	Move most of the 15 variations on generating opt_inet.h and	2014-08-04 22:37:02 +00:00
Makefile	cxgbe(4): Add a minimal if_cxl module that pulls in the real driver as	2015-02-06 01:10:04 +00:00