1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-20 11:11:24 +00:00
freebsd/sys/dev/ppbus/ppb_base.c
Mike Smith 46f3ff7986 Major ppbus updates from the author.
- ppbus now supports PLIP via the if_plip driver
 - ieee1284 infrastructure added, including parallel-port PnP
 - port microsequencer added, for scripting the sort of port I/O
   that is common with parallel devices without endless calls up and down
   through the driver structure.
 - improved bus ownership behaviour among the ppbus-using drivers.
 - improved I/O chipset feature detection

The vpo driver is now implemented using the microsequencer, leading to
some performance improvements as well as providing an extensive example
of its use.

Reviewed by:	msmith
Submitted by:	Nicolas Souchu <Nicolas.Souchu@prism.uvsq.fr>
1998-08-03 19:14:33 +00:00

181 lines
4.1 KiB
C

/*-
* Copyright (c) 1997, 1998 Nicolas Souchu
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $Id: ppb_base.c,v 1.3 1997/09/01 00:51:45 bde Exp $
*
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <dev/ppbus/ppbconf.h>
/*
* ppb_intr()
*
* Function called by ppcintr() when an intr occurs.
*/
void
ppb_intr(struct ppb_link *pl)
{
struct ppb_data *ppb = pl->ppbus;
/*
* Call chipset dependent code.
* Should be filled at chipset initialisation if needed.
*/
if (pl->adapter->intr_handler)
(*pl->adapter->intr_handler)(pl->adapter_unit);
/*
* Call upper handler iff the bus is owned by a device and
* this device has specified an interrupt handler.
*/
if (ppb->ppb_owner && ppb->ppb_owner->intr)
(*ppb->ppb_owner->intr)(ppb->ppb_owner->id_unit);
return;
}
/*
* ppb_poll_device()
*
* Polls the device
*
* max is a delay in 10-milliseconds
*/
int
ppb_poll_device(struct ppb_device *dev, int max,
char mask, char status, int how)
{
int i, error;
for (i = 0; i < max; i++) {
if ((ppb_rstr(dev) & mask) == status)
return (0);
switch (how) {
case PPB_NOINTR:
/* wait 10 ms */
if ((error = tsleep((caddr_t)dev, PPBPRI,
"ppbpoll", hz/100)))
return (error);
break;
case PPB_INTR:
default:
/* wait 10 ms */
if ((error = tsleep((caddr_t)dev, PPBPRI | PCATCH,
"ppbpoll", hz/100)))
return (error);
break;
}
}
return (EWOULDBLOCK);
}
/*
* ppb_set_mode()
*
* Set the operating mode of the chipset
*/
int
ppb_set_mode(struct ppb_device *dev, int mode)
{
struct ppb_data *ppb = dev->ppb;
int old_mode = ppb_get_mode(dev);
if ((*ppb->ppb_link->adapter->setmode)(dev->id_unit, mode))
return (-1);
/* XXX yet device mode = ppbus mode = chipset mode */
dev->mode = ppb->mode = mode;
return (old_mode);
}
/*
* ppb_reset_epp_timeout()
*
* Reset the EPP timeout bit in the status register
*/
int
ppb_reset_epp_timeout(struct ppb_device *dev)
{
struct ppb_data *ppb = dev->ppb;
if (ppb->ppb_owner != dev)
return (EACCES);
(*ppb->ppb_link->adapter->reset_epp_timeout)(dev->id_unit);
return (0);
}
/*
* ppb_ecp_sync()
*
* Wait for the ECP FIFO to be empty
*/
int
ppb_ecp_sync(struct ppb_device *dev)
{
struct ppb_data *ppb = dev->ppb;
if (ppb->ppb_owner != dev)
return (EACCES);
(*ppb->ppb_link->adapter->ecp_sync)(dev->id_unit);
return (0);
}
/*
* ppb_get_status()
*
* Read the status register and update the status info
*/
int
ppb_get_status(struct ppb_device *dev, struct ppb_status *status)
{
struct ppb_data *ppb = dev->ppb;
register char r;
if (ppb->ppb_owner != dev)
return (EACCES);
r = status->status = ppb_rstr(dev);
status->timeout = r & TIMEOUT;
status->error = !(r & nFAULT);
status->select = r & SELECT;
status->paper_end = r & ERROR;
status->ack = !(r & nACK);
status->busy = !(r & nBUSY);
return (0);
}