mirror of
https://git.FreeBSD.org/src.git
synced 2024-12-27 11:55:06 +00:00
daf9197cff
will sometimes fail to initialize problem due to a lock contention with management hardware. However, in order to deliver that fix it was necessary to take a shared code update as a whole, and this required scattered changes in the core code to be compatible. The em driver now has VLAN HW support added as the igb driver had previously. MFC after: ASAP - in time for 7.1 RELEASE
677 lines
20 KiB
C
677 lines
20 KiB
C
/******************************************************************************
|
|
|
|
Copyright (c) 2001-2008, Intel Corporation
|
|
All rights reserved.
|
|
|
|
Redistribution and use in source and binary forms, with or without
|
|
modification, are permitted provided that the following conditions are met:
|
|
|
|
1. Redistributions of source code must retain the above copyright notice,
|
|
this list of conditions and the following disclaimer.
|
|
|
|
2. Redistributions in binary form must reproduce the above copyright
|
|
notice, this list of conditions and the following disclaimer in the
|
|
documentation and/or other materials provided with the distribution.
|
|
|
|
3. Neither the name of the Intel Corporation nor the names of its
|
|
contributors may be used to endorse or promote products derived from
|
|
this software without specific prior written permission.
|
|
|
|
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
|
|
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
POSSIBILITY OF SUCH DAMAGE.
|
|
|
|
******************************************************************************/
|
|
/*$FreeBSD$*/
|
|
|
|
/*
|
|
* 82540EM Gigabit Ethernet Controller
|
|
* 82540EP Gigabit Ethernet Controller
|
|
* 82545EM Gigabit Ethernet Controller (Copper)
|
|
* 82545EM Gigabit Ethernet Controller (Fiber)
|
|
* 82545GM Gigabit Ethernet Controller
|
|
* 82546EB Gigabit Ethernet Controller (Copper)
|
|
* 82546EB Gigabit Ethernet Controller (Fiber)
|
|
* 82546GB Gigabit Ethernet Controller
|
|
*/
|
|
|
|
#include "e1000_api.h"
|
|
|
|
static s32 e1000_init_phy_params_82540(struct e1000_hw *hw);
|
|
static s32 e1000_init_nvm_params_82540(struct e1000_hw *hw);
|
|
static s32 e1000_init_mac_params_82540(struct e1000_hw *hw);
|
|
static s32 e1000_adjust_serdes_amplitude_82540(struct e1000_hw *hw);
|
|
static void e1000_clear_hw_cntrs_82540(struct e1000_hw *hw);
|
|
static s32 e1000_init_hw_82540(struct e1000_hw *hw);
|
|
static s32 e1000_reset_hw_82540(struct e1000_hw *hw);
|
|
static s32 e1000_set_phy_mode_82540(struct e1000_hw *hw);
|
|
static s32 e1000_set_vco_speed_82540(struct e1000_hw *hw);
|
|
static s32 e1000_setup_copper_link_82540(struct e1000_hw *hw);
|
|
static s32 e1000_setup_fiber_serdes_link_82540(struct e1000_hw *hw);
|
|
static void e1000_power_down_phy_copper_82540(struct e1000_hw *hw);
|
|
|
|
/**
|
|
* e1000_init_phy_params_82540 - Init PHY func ptrs.
|
|
* @hw: pointer to the HW structure
|
|
**/
|
|
static s32 e1000_init_phy_params_82540(struct e1000_hw *hw)
|
|
{
|
|
struct e1000_phy_info *phy = &hw->phy;
|
|
s32 ret_val = E1000_SUCCESS;
|
|
|
|
phy->addr = 1;
|
|
phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT;
|
|
phy->reset_delay_us = 10000;
|
|
phy->type = e1000_phy_m88;
|
|
|
|
/* Function Pointers */
|
|
phy->ops.check_polarity = e1000_check_polarity_m88;
|
|
phy->ops.commit = e1000_phy_sw_reset_generic;
|
|
phy->ops.force_speed_duplex = e1000_phy_force_speed_duplex_m88;
|
|
phy->ops.get_cable_length = e1000_get_cable_length_m88;
|
|
phy->ops.get_cfg_done = e1000_get_cfg_done_generic;
|
|
phy->ops.read_reg = e1000_read_phy_reg_m88;
|
|
phy->ops.reset = e1000_phy_hw_reset_generic;
|
|
phy->ops.write_reg = e1000_write_phy_reg_m88;
|
|
phy->ops.get_info = e1000_get_phy_info_m88;
|
|
phy->ops.power_up = e1000_power_up_phy_copper;
|
|
phy->ops.power_down = e1000_power_down_phy_copper_82540;
|
|
|
|
ret_val = e1000_get_phy_id(hw);
|
|
if (ret_val)
|
|
goto out;
|
|
|
|
/* Verify phy id */
|
|
switch (hw->mac.type) {
|
|
case e1000_82540:
|
|
case e1000_82545:
|
|
case e1000_82545_rev_3:
|
|
case e1000_82546:
|
|
case e1000_82546_rev_3:
|
|
if (phy->id == M88E1011_I_PHY_ID)
|
|
break;
|
|
/* Fall Through */
|
|
default:
|
|
ret_val = -E1000_ERR_PHY;
|
|
goto out;
|
|
break;
|
|
}
|
|
|
|
out:
|
|
return ret_val;
|
|
}
|
|
|
|
/**
|
|
* e1000_init_nvm_params_82540 - Init NVM func ptrs.
|
|
* @hw: pointer to the HW structure
|
|
**/
|
|
static s32 e1000_init_nvm_params_82540(struct e1000_hw *hw)
|
|
{
|
|
struct e1000_nvm_info *nvm = &hw->nvm;
|
|
u32 eecd = E1000_READ_REG(hw, E1000_EECD);
|
|
|
|
DEBUGFUNC("e1000_init_nvm_params_82540");
|
|
|
|
nvm->type = e1000_nvm_eeprom_microwire;
|
|
nvm->delay_usec = 50;
|
|
nvm->opcode_bits = 3;
|
|
switch (nvm->override) {
|
|
case e1000_nvm_override_microwire_large:
|
|
nvm->address_bits = 8;
|
|
nvm->word_size = 256;
|
|
break;
|
|
case e1000_nvm_override_microwire_small:
|
|
nvm->address_bits = 6;
|
|
nvm->word_size = 64;
|
|
break;
|
|
default:
|
|
nvm->address_bits = eecd & E1000_EECD_SIZE ? 8 : 6;
|
|
nvm->word_size = eecd & E1000_EECD_SIZE ? 256 : 64;
|
|
break;
|
|
}
|
|
|
|
/* Function Pointers */
|
|
nvm->ops.acquire = e1000_acquire_nvm_generic;
|
|
nvm->ops.read = e1000_read_nvm_microwire;
|
|
nvm->ops.release = e1000_release_nvm_generic;
|
|
nvm->ops.update = e1000_update_nvm_checksum_generic;
|
|
nvm->ops.valid_led_default = e1000_valid_led_default_generic;
|
|
nvm->ops.validate = e1000_validate_nvm_checksum_generic;
|
|
nvm->ops.write = e1000_write_nvm_microwire;
|
|
|
|
return E1000_SUCCESS;
|
|
}
|
|
|
|
/**
|
|
* e1000_init_mac_params_82540 - Init MAC func ptrs.
|
|
* @hw: pointer to the HW structure
|
|
**/
|
|
static s32 e1000_init_mac_params_82540(struct e1000_hw *hw)
|
|
{
|
|
struct e1000_mac_info *mac = &hw->mac;
|
|
s32 ret_val = E1000_SUCCESS;
|
|
|
|
DEBUGFUNC("e1000_init_mac_params_82540");
|
|
|
|
/* Set media type */
|
|
switch (hw->device_id) {
|
|
case E1000_DEV_ID_82545EM_FIBER:
|
|
case E1000_DEV_ID_82545GM_FIBER:
|
|
case E1000_DEV_ID_82546EB_FIBER:
|
|
case E1000_DEV_ID_82546GB_FIBER:
|
|
hw->phy.media_type = e1000_media_type_fiber;
|
|
break;
|
|
case E1000_DEV_ID_82545GM_SERDES:
|
|
case E1000_DEV_ID_82546GB_SERDES:
|
|
hw->phy.media_type = e1000_media_type_internal_serdes;
|
|
break;
|
|
default:
|
|
hw->phy.media_type = e1000_media_type_copper;
|
|
break;
|
|
}
|
|
|
|
/* Set mta register count */
|
|
mac->mta_reg_count = 128;
|
|
/* Set rar entry count */
|
|
mac->rar_entry_count = E1000_RAR_ENTRIES;
|
|
|
|
/* Function pointers */
|
|
|
|
/* bus type/speed/width */
|
|
mac->ops.get_bus_info = e1000_get_bus_info_pci_generic;
|
|
/* function id */
|
|
mac->ops.set_lan_id = e1000_set_lan_id_multi_port_pci;
|
|
/* reset */
|
|
mac->ops.reset_hw = e1000_reset_hw_82540;
|
|
/* hw initialization */
|
|
mac->ops.init_hw = e1000_init_hw_82540;
|
|
/* link setup */
|
|
mac->ops.setup_link = e1000_setup_link_generic;
|
|
/* physical interface setup */
|
|
mac->ops.setup_physical_interface =
|
|
(hw->phy.media_type == e1000_media_type_copper)
|
|
? e1000_setup_copper_link_82540
|
|
: e1000_setup_fiber_serdes_link_82540;
|
|
/* check for link */
|
|
switch (hw->phy.media_type) {
|
|
case e1000_media_type_copper:
|
|
mac->ops.check_for_link = e1000_check_for_copper_link_generic;
|
|
break;
|
|
case e1000_media_type_fiber:
|
|
mac->ops.check_for_link = e1000_check_for_fiber_link_generic;
|
|
break;
|
|
case e1000_media_type_internal_serdes:
|
|
mac->ops.check_for_link = e1000_check_for_serdes_link_generic;
|
|
break;
|
|
default:
|
|
ret_val = -E1000_ERR_CONFIG;
|
|
goto out;
|
|
break;
|
|
}
|
|
/* link info */
|
|
mac->ops.get_link_up_info =
|
|
(hw->phy.media_type == e1000_media_type_copper)
|
|
? e1000_get_speed_and_duplex_copper_generic
|
|
: e1000_get_speed_and_duplex_fiber_serdes_generic;
|
|
/* multicast address update */
|
|
mac->ops.update_mc_addr_list = e1000_update_mc_addr_list_generic;
|
|
/* writing VFTA */
|
|
mac->ops.write_vfta = e1000_write_vfta_generic;
|
|
/* clearing VFTA */
|
|
mac->ops.clear_vfta = e1000_clear_vfta_generic;
|
|
/* setting MTA */
|
|
mac->ops.mta_set = e1000_mta_set_generic;
|
|
/* setup LED */
|
|
mac->ops.setup_led = e1000_setup_led_generic;
|
|
/* cleanup LED */
|
|
mac->ops.cleanup_led = e1000_cleanup_led_generic;
|
|
/* turn on/off LED */
|
|
mac->ops.led_on = e1000_led_on_generic;
|
|
mac->ops.led_off = e1000_led_off_generic;
|
|
/* clear hardware counters */
|
|
mac->ops.clear_hw_cntrs = e1000_clear_hw_cntrs_82540;
|
|
|
|
out:
|
|
return ret_val;
|
|
}
|
|
|
|
/**
|
|
* e1000_init_function_pointers_82540 - Init func ptrs.
|
|
* @hw: pointer to the HW structure
|
|
*
|
|
* Called to initialize all function pointers and parameters.
|
|
**/
|
|
void e1000_init_function_pointers_82540(struct e1000_hw *hw)
|
|
{
|
|
DEBUGFUNC("e1000_init_function_pointers_82540");
|
|
|
|
hw->mac.ops.init_params = e1000_init_mac_params_82540;
|
|
hw->nvm.ops.init_params = e1000_init_nvm_params_82540;
|
|
hw->phy.ops.init_params = e1000_init_phy_params_82540;
|
|
}
|
|
|
|
/**
|
|
* e1000_reset_hw_82540 - Reset hardware
|
|
* @hw: pointer to the HW structure
|
|
*
|
|
* This resets the hardware into a known state.
|
|
**/
|
|
static s32 e1000_reset_hw_82540(struct e1000_hw *hw)
|
|
{
|
|
u32 ctrl, icr, manc;
|
|
s32 ret_val = E1000_SUCCESS;
|
|
|
|
DEBUGFUNC("e1000_reset_hw_82540");
|
|
|
|
DEBUGOUT("Masking off all interrupts\n");
|
|
E1000_WRITE_REG(hw, E1000_IMC, 0xFFFFFFFF);
|
|
|
|
E1000_WRITE_REG(hw, E1000_RCTL, 0);
|
|
E1000_WRITE_REG(hw, E1000_TCTL, E1000_TCTL_PSP);
|
|
E1000_WRITE_FLUSH(hw);
|
|
|
|
/*
|
|
* Delay to allow any outstanding PCI transactions to complete
|
|
* before resetting the device.
|
|
*/
|
|
msec_delay(10);
|
|
|
|
ctrl = E1000_READ_REG(hw, E1000_CTRL);
|
|
|
|
DEBUGOUT("Issuing a global reset to 82540/82545/82546 MAC\n");
|
|
switch (hw->mac.type) {
|
|
case e1000_82545_rev_3:
|
|
case e1000_82546_rev_3:
|
|
E1000_WRITE_REG(hw, E1000_CTRL_DUP, ctrl | E1000_CTRL_RST);
|
|
break;
|
|
default:
|
|
/*
|
|
* These controllers can't ack the 64-bit write when
|
|
* issuing the reset, so we use IO-mapping as a
|
|
* workaround to issue the reset.
|
|
*/
|
|
E1000_WRITE_REG_IO(hw, E1000_CTRL, ctrl | E1000_CTRL_RST);
|
|
break;
|
|
}
|
|
|
|
/* Wait for EEPROM reload */
|
|
msec_delay(5);
|
|
|
|
/* Disable HW ARPs on ASF enabled adapters */
|
|
manc = E1000_READ_REG(hw, E1000_MANC);
|
|
manc &= ~E1000_MANC_ARP_EN;
|
|
E1000_WRITE_REG(hw, E1000_MANC, manc);
|
|
|
|
E1000_WRITE_REG(hw, E1000_IMC, 0xffffffff);
|
|
icr = E1000_READ_REG(hw, E1000_ICR);
|
|
|
|
return ret_val;
|
|
}
|
|
|
|
/**
|
|
* e1000_init_hw_82540 - Initialize hardware
|
|
* @hw: pointer to the HW structure
|
|
*
|
|
* This inits the hardware readying it for operation.
|
|
**/
|
|
static s32 e1000_init_hw_82540(struct e1000_hw *hw)
|
|
{
|
|
struct e1000_mac_info *mac = &hw->mac;
|
|
u32 txdctl, ctrl_ext;
|
|
s32 ret_val = E1000_SUCCESS;
|
|
u16 i;
|
|
|
|
DEBUGFUNC("e1000_init_hw_82540");
|
|
|
|
/* Initialize identification LED */
|
|
ret_val = e1000_id_led_init_generic(hw);
|
|
if (ret_val) {
|
|
DEBUGOUT("Error initializing identification LED\n");
|
|
/* This is not fatal and we should not stop init due to this */
|
|
}
|
|
|
|
/* Disabling VLAN filtering */
|
|
DEBUGOUT("Initializing the IEEE VLAN\n");
|
|
if (mac->type < e1000_82545_rev_3)
|
|
E1000_WRITE_REG(hw, E1000_VET, 0);
|
|
|
|
mac->ops.clear_vfta(hw);
|
|
|
|
/* Setup the receive address. */
|
|
e1000_init_rx_addrs_generic(hw, mac->rar_entry_count);
|
|
|
|
/* Zero out the Multicast HASH table */
|
|
DEBUGOUT("Zeroing the MTA\n");
|
|
for (i = 0; i < mac->mta_reg_count; i++) {
|
|
E1000_WRITE_REG_ARRAY(hw, E1000_MTA, i, 0);
|
|
/*
|
|
* Avoid back to back register writes by adding the register
|
|
* read (flush). This is to protect against some strange
|
|
* bridge configurations that may issue Memory Write Block
|
|
* (MWB) to our register space. The *_rev_3 hardware at
|
|
* least doesn't respond correctly to every other dword in an
|
|
* MWB to our register space.
|
|
*/
|
|
E1000_WRITE_FLUSH(hw);
|
|
}
|
|
|
|
if (mac->type < e1000_82545_rev_3)
|
|
e1000_pcix_mmrbc_workaround_generic(hw);
|
|
|
|
/* Setup link and flow control */
|
|
ret_val = mac->ops.setup_link(hw);
|
|
|
|
txdctl = E1000_READ_REG(hw, E1000_TXDCTL(0));
|
|
txdctl = (txdctl & ~E1000_TXDCTL_WTHRESH) |
|
|
E1000_TXDCTL_FULL_TX_DESC_WB;
|
|
E1000_WRITE_REG(hw, E1000_TXDCTL(0), txdctl);
|
|
|
|
/*
|
|
* Clear all of the statistics registers (clear on read). It is
|
|
* important that we do this after we have tried to establish link
|
|
* because the symbol error count will increment wildly if there
|
|
* is no link.
|
|
*/
|
|
e1000_clear_hw_cntrs_82540(hw);
|
|
|
|
if ((hw->device_id == E1000_DEV_ID_82546GB_QUAD_COPPER) ||
|
|
(hw->device_id == E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3)) {
|
|
ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT);
|
|
/*
|
|
* Relaxed ordering must be disabled to avoid a parity
|
|
* error crash in a PCI slot.
|
|
*/
|
|
ctrl_ext |= E1000_CTRL_EXT_RO_DIS;
|
|
E1000_WRITE_REG(hw, E1000_CTRL_EXT, ctrl_ext);
|
|
}
|
|
|
|
return ret_val;
|
|
}
|
|
|
|
/**
|
|
* e1000_setup_copper_link_82540 - Configure copper link settings
|
|
* @hw: pointer to the HW structure
|
|
*
|
|
* Calls the appropriate function to configure the link for auto-neg or forced
|
|
* speed and duplex. Then we check for link, once link is established calls
|
|
* to configure collision distance and flow control are called. If link is
|
|
* not established, we return -E1000_ERR_PHY (-2).
|
|
**/
|
|
static s32 e1000_setup_copper_link_82540(struct e1000_hw *hw)
|
|
{
|
|
u32 ctrl;
|
|
s32 ret_val = E1000_SUCCESS;
|
|
u16 data;
|
|
|
|
DEBUGFUNC("e1000_setup_copper_link_82540");
|
|
|
|
ctrl = E1000_READ_REG(hw, E1000_CTRL);
|
|
ctrl |= E1000_CTRL_SLU;
|
|
ctrl &= ~(E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
|
|
E1000_WRITE_REG(hw, E1000_CTRL, ctrl);
|
|
|
|
ret_val = e1000_set_phy_mode_82540(hw);
|
|
if (ret_val)
|
|
goto out;
|
|
|
|
if (hw->mac.type == e1000_82545_rev_3 ||
|
|
hw->mac.type == e1000_82546_rev_3) {
|
|
ret_val = hw->phy.ops.read_reg(hw, M88E1000_PHY_SPEC_CTRL, &data);
|
|
if (ret_val)
|
|
goto out;
|
|
data |= 0x00000008;
|
|
ret_val = hw->phy.ops.write_reg(hw, M88E1000_PHY_SPEC_CTRL, data);
|
|
if (ret_val)
|
|
goto out;
|
|
}
|
|
|
|
ret_val = e1000_copper_link_setup_m88(hw);
|
|
if (ret_val)
|
|
goto out;
|
|
|
|
ret_val = e1000_setup_copper_link_generic(hw);
|
|
|
|
out:
|
|
return ret_val;
|
|
}
|
|
|
|
/**
|
|
* e1000_setup_fiber_serdes_link_82540 - Setup link for fiber/serdes
|
|
* @hw: pointer to the HW structure
|
|
*
|
|
* Set the output amplitude to the value in the EEPROM and adjust the VCO
|
|
* speed to improve Bit Error Rate (BER) performance. Configures collision
|
|
* distance and flow control for fiber and serdes links. Upon successful
|
|
* setup, poll for link.
|
|
**/
|
|
static s32 e1000_setup_fiber_serdes_link_82540(struct e1000_hw *hw)
|
|
{
|
|
struct e1000_mac_info *mac = &hw->mac;
|
|
s32 ret_val = E1000_SUCCESS;
|
|
|
|
DEBUGFUNC("e1000_setup_fiber_serdes_link_82540");
|
|
|
|
switch (mac->type) {
|
|
case e1000_82545_rev_3:
|
|
case e1000_82546_rev_3:
|
|
if (hw->phy.media_type == e1000_media_type_internal_serdes) {
|
|
/*
|
|
* If we're on serdes media, adjust the output
|
|
* amplitude to value set in the EEPROM.
|
|
*/
|
|
ret_val = e1000_adjust_serdes_amplitude_82540(hw);
|
|
if (ret_val)
|
|
goto out;
|
|
}
|
|
/* Adjust VCO speed to improve BER performance */
|
|
ret_val = e1000_set_vco_speed_82540(hw);
|
|
if (ret_val)
|
|
goto out;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
ret_val = e1000_setup_fiber_serdes_link_generic(hw);
|
|
|
|
out:
|
|
return ret_val;
|
|
}
|
|
|
|
/**
|
|
* e1000_adjust_serdes_amplitude_82540 - Adjust amplitude based on EEPROM
|
|
* @hw: pointer to the HW structure
|
|
*
|
|
* Adjust the SERDES output amplitude based on the EEPROM settings.
|
|
**/
|
|
static s32 e1000_adjust_serdes_amplitude_82540(struct e1000_hw *hw)
|
|
{
|
|
s32 ret_val = E1000_SUCCESS;
|
|
u16 nvm_data;
|
|
|
|
DEBUGFUNC("e1000_adjust_serdes_amplitude_82540");
|
|
|
|
ret_val = hw->nvm.ops.read(hw, NVM_SERDES_AMPLITUDE, 1, &nvm_data);
|
|
if (ret_val)
|
|
goto out;
|
|
|
|
if (nvm_data != NVM_RESERVED_WORD) {
|
|
/* Adjust serdes output amplitude only. */
|
|
nvm_data &= NVM_SERDES_AMPLITUDE_MASK;
|
|
ret_val = hw->phy.ops.write_reg(hw,
|
|
M88E1000_PHY_EXT_CTRL,
|
|
nvm_data);
|
|
if (ret_val)
|
|
goto out;
|
|
}
|
|
|
|
out:
|
|
return ret_val;
|
|
}
|
|
|
|
/**
|
|
* e1000_set_vco_speed_82540 - Set VCO speed for better performance
|
|
* @hw: pointer to the HW structure
|
|
*
|
|
* Set the VCO speed to improve Bit Error Rate (BER) performance.
|
|
**/
|
|
static s32 e1000_set_vco_speed_82540(struct e1000_hw *hw)
|
|
{
|
|
s32 ret_val = E1000_SUCCESS;
|
|
u16 default_page = 0;
|
|
u16 phy_data;
|
|
|
|
DEBUGFUNC("e1000_set_vco_speed_82540");
|
|
|
|
/* Set PHY register 30, page 5, bit 8 to 0 */
|
|
|
|
ret_val = hw->phy.ops.read_reg(hw,
|
|
M88E1000_PHY_PAGE_SELECT,
|
|
&default_page);
|
|
if (ret_val)
|
|
goto out;
|
|
|
|
ret_val = hw->phy.ops.write_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0005);
|
|
if (ret_val)
|
|
goto out;
|
|
|
|
ret_val = hw->phy.ops.read_reg(hw, M88E1000_PHY_GEN_CONTROL, &phy_data);
|
|
if (ret_val)
|
|
goto out;
|
|
|
|
phy_data &= ~M88E1000_PHY_VCO_REG_BIT8;
|
|
ret_val = hw->phy.ops.write_reg(hw, M88E1000_PHY_GEN_CONTROL, phy_data);
|
|
if (ret_val)
|
|
goto out;
|
|
|
|
/* Set PHY register 30, page 4, bit 11 to 1 */
|
|
|
|
ret_val = hw->phy.ops.write_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0004);
|
|
if (ret_val)
|
|
goto out;
|
|
|
|
ret_val = hw->phy.ops.read_reg(hw, M88E1000_PHY_GEN_CONTROL, &phy_data);
|
|
if (ret_val)
|
|
goto out;
|
|
|
|
phy_data |= M88E1000_PHY_VCO_REG_BIT11;
|
|
ret_val = hw->phy.ops.write_reg(hw, M88E1000_PHY_GEN_CONTROL, phy_data);
|
|
if (ret_val)
|
|
goto out;
|
|
|
|
ret_val = hw->phy.ops.write_reg(hw, M88E1000_PHY_PAGE_SELECT,
|
|
default_page);
|
|
|
|
out:
|
|
return ret_val;
|
|
}
|
|
|
|
/**
|
|
* e1000_set_phy_mode_82540 - Set PHY to class A mode
|
|
* @hw: pointer to the HW structure
|
|
*
|
|
* Sets the PHY to class A mode and assumes the following operations will
|
|
* follow to enable the new class mode:
|
|
* 1. Do a PHY soft reset.
|
|
* 2. Restart auto-negotiation or force link.
|
|
**/
|
|
static s32 e1000_set_phy_mode_82540(struct e1000_hw *hw)
|
|
{
|
|
struct e1000_phy_info *phy = &hw->phy;
|
|
s32 ret_val = E1000_SUCCESS;
|
|
u16 nvm_data;
|
|
|
|
DEBUGFUNC("e1000_set_phy_mode_82540");
|
|
|
|
if (hw->mac.type != e1000_82545_rev_3)
|
|
goto out;
|
|
|
|
ret_val = hw->nvm.ops.read(hw, NVM_PHY_CLASS_WORD, 1, &nvm_data);
|
|
if (ret_val) {
|
|
ret_val = -E1000_ERR_PHY;
|
|
goto out;
|
|
}
|
|
|
|
if ((nvm_data != NVM_RESERVED_WORD) && (nvm_data & NVM_PHY_CLASS_A)) {
|
|
ret_val = hw->phy.ops.write_reg(hw, M88E1000_PHY_PAGE_SELECT,
|
|
0x000B);
|
|
if (ret_val) {
|
|
ret_val = -E1000_ERR_PHY;
|
|
goto out;
|
|
}
|
|
ret_val = hw->phy.ops.write_reg(hw,
|
|
M88E1000_PHY_GEN_CONTROL,
|
|
0x8104);
|
|
if (ret_val) {
|
|
ret_val = -E1000_ERR_PHY;
|
|
goto out;
|
|
}
|
|
|
|
phy->reset_disable = FALSE;
|
|
}
|
|
|
|
out:
|
|
return ret_val;
|
|
}
|
|
|
|
/**
|
|
* e1000_power_down_phy_copper_82540 - Remove link in case of PHY power down
|
|
* @hw: pointer to the HW structure
|
|
*
|
|
* In the case of a PHY power down to save power, or to turn off link during a
|
|
* driver unload, or wake on lan is not enabled, remove the link.
|
|
**/
|
|
static void e1000_power_down_phy_copper_82540(struct e1000_hw *hw)
|
|
{
|
|
/* If the management interface is not enabled, then power down */
|
|
if (!(E1000_READ_REG(hw, E1000_MANC) & E1000_MANC_SMBUS_EN))
|
|
e1000_power_down_phy_copper(hw);
|
|
|
|
return;
|
|
}
|
|
|
|
/**
|
|
* e1000_clear_hw_cntrs_82540 - Clear device specific hardware counters
|
|
* @hw: pointer to the HW structure
|
|
*
|
|
* Clears the hardware counters by reading the counter registers.
|
|
**/
|
|
static void e1000_clear_hw_cntrs_82540(struct e1000_hw *hw)
|
|
{
|
|
DEBUGFUNC("e1000_clear_hw_cntrs_82540");
|
|
|
|
e1000_clear_hw_cntrs_base_generic(hw);
|
|
|
|
E1000_READ_REG(hw, E1000_PRC64);
|
|
E1000_READ_REG(hw, E1000_PRC127);
|
|
E1000_READ_REG(hw, E1000_PRC255);
|
|
E1000_READ_REG(hw, E1000_PRC511);
|
|
E1000_READ_REG(hw, E1000_PRC1023);
|
|
E1000_READ_REG(hw, E1000_PRC1522);
|
|
E1000_READ_REG(hw, E1000_PTC64);
|
|
E1000_READ_REG(hw, E1000_PTC127);
|
|
E1000_READ_REG(hw, E1000_PTC255);
|
|
E1000_READ_REG(hw, E1000_PTC511);
|
|
E1000_READ_REG(hw, E1000_PTC1023);
|
|
E1000_READ_REG(hw, E1000_PTC1522);
|
|
|
|
E1000_READ_REG(hw, E1000_ALGNERRC);
|
|
E1000_READ_REG(hw, E1000_RXERRC);
|
|
E1000_READ_REG(hw, E1000_TNCRS);
|
|
E1000_READ_REG(hw, E1000_CEXTERR);
|
|
E1000_READ_REG(hw, E1000_TSCTC);
|
|
E1000_READ_REG(hw, E1000_TSCTFC);
|
|
|
|
E1000_READ_REG(hw, E1000_MGTPRC);
|
|
E1000_READ_REG(hw, E1000_MGTPDC);
|
|
E1000_READ_REG(hw, E1000_MGTPTC);
|
|
}
|
|
|