mirror of
https://git.FreeBSD.org/src.git
synced 2024-12-19 10:53:58 +00:00
38192bfc9f
This is an AR71xx based board with 8MB flash, 64MB RAM, a Mini-PCI+ slot (see below) and a single 10/100/1000baseT ethernet port. It also has two USB ports. This is an easier board than most to add as it doesn't have a switch PHY on-board. This made it (mostly) trivial to craft a working configuration. Things to note: * This, like most other reference boards, use uboot rather then redboot. It means that you typically have to manually flash both the kernel and rootfs partitions. * Since there's currently no (nice) way to extract out the ethernet MAC and RAM from the uboot environment, the RAM will default to 32mb and the MAC will be something very incorrect. I'll try to fix this up in a subsequent commit or two, even if it's just some hard-coded nonsense in ar71xx_machdep.c for now. * The board is designed for a specific model of mini-PCI+ NIC which never made it into production. Normal mini-PCI NICs will work fine; if you happen to have the NIC in question then it will work fine with this board.
80 lines
1.9 KiB
Plaintext
80 lines
1.9 KiB
Plaintext
|
|
# $FreeBSD$
|
|
|
|
# There's two interfaces, but only one socket is populated.
|
|
#
|
|
# There's an AR8021 PHY attached to arge1.
|
|
#
|
|
# XXX TODO: figure out where to extract the MAC from.
|
|
hint.arge.1.phymask=0x01
|
|
|
|
# XXX TODO: pass in hints for the GPIO -> LED mapping for the
|
|
# minipci slot. The specific customer reference design NIC
|
|
# wires GPIO5 from each AR9220 to one of two GPIO pins on the
|
|
# MiniPCI bus. However, this may be very specific to the NIC
|
|
# being used.
|
|
|
|
# The default flash layout:
|
|
# uboot: 192k
|
|
# env: 64k
|
|
# rootfs: 6144k
|
|
# uimage (kernel): 1728k
|
|
# caldata: 64k
|
|
#
|
|
# We steal 64k from the end of rootfs to store the local config.
|
|
|
|
hint.map.0.at="flash/spi0"
|
|
hint.map.0.start=0x00000000
|
|
hint.map.0.end=0x000030000
|
|
hint.map.0.name="uboot"
|
|
hint.map.0.readonly=1
|
|
|
|
hint.map.1.at="flash/spi0"
|
|
hint.map.1.start=0x00030000
|
|
hint.map.1.end=0x00040000
|
|
hint.map.1.name="uboot-env"
|
|
hint.map.1.readonly=1
|
|
|
|
hint.map.2.at="flash/spi0"
|
|
hint.map.2.start=0x00040000
|
|
hint.map.2.end=0x00630000
|
|
hint.map.2.name="rootfs"
|
|
hint.map.2.readonly=1
|
|
|
|
hint.map.3.at="flash/spi0"
|
|
hint.map.3.start=0x00630000
|
|
hint.map.3.end=0x00640000
|
|
hint.map.3.name="cfg"
|
|
hint.map.3.readonly=0
|
|
|
|
hint.map.4.at="flash/spi0"
|
|
hint.map.4.start=0x00640000
|
|
hint.map.4.end=0x007f0000
|
|
hint.map.4.name="kernel"
|
|
hint.map.4.readonly=1
|
|
|
|
hint.map.5.at="flash/spi0"
|
|
hint.map.5.start=0x007f0000
|
|
hint.map.5.end=0x00800000
|
|
hint.map.5.name="art"
|
|
hint.map.5.readonly=1
|
|
|
|
# Don't flip on anything that isn't already enabled by the
|
|
# bootloader.
|
|
hint.gpio.0.function_set=0x00000000
|
|
hint.gpio.0.function_clear=0x00000000
|
|
|
|
# Which GPIO lines to enable - just GPIO2/3 for the LEDs.
|
|
hint.gpio.0.pinmask=0x0000000c
|
|
|
|
# GPIO2 and GPIO3 are LEDs, where 0=on and 1=off.
|
|
# XXX TODO: teach gpioled about polarity?
|
|
hint.gpioled.0.at="gpiobus0"
|
|
hint.gpioled.0.pins="0x0004"
|
|
hint.gpioled.0.name="led1"
|
|
|
|
hint.gpioled.1.at="gpiobus0"
|
|
hint.gpioled.1.pins="0x0008"
|
|
hint.gpioled.1.name="led2"
|
|
|