1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-17 10:26:15 +00:00
freebsd/sys/pci/intpmreg.h
Nicolas Souchu 7c7545e182 SMBus support for the Intel PIIX4 power management unit. See smbus(4),
iicbus(4) and smb(4).

User programs are available to retrieve SDRAM and sensor info, contact
the author.

Submitted by: Takanori Watanabe <takawata@shidahara1.planet.sci.kobe-u.ac.jp>
Reviewed by: Mike Smith <msmith@freebsd.org>
1999-01-24 18:13:31 +00:00

78 lines
3.1 KiB
C

/*-
* Copyright (c) 1998, 1999 Takanori Watanabe
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $Id$
*/
/*Register Difinition for Intel Chipset with ACPI Support*/
#define PCI_BASE_ADDR_SMB 0x90 /*Where to MAP IO*/
#define PCI_BASE_ADDR_PM 0x40
#define PCI_HST_CFG_SMB 0xd2 /*Host Configuration*/
#define PCI_INTR_SMB_SMI 0
#define PCI_INTR_SMB_IRQ9 8
#define PCI_INTR_SMB_ENABLE 1
#define PCI_SLV_CMD_SMB 0xd3 /*SLAVE COMMAND*/
#define PCI_SLV_SDW_SMB_1 0xd4 /*SLAVE SHADOW PORT 1*/
#define PCI_SLV_SDW_SMB_2 0xd5 /*SLAVE SHADOW PORT 2*/
#define PCI_REVID_SMB 0xd6
#define LSB 0x1
#define PIIX4_SMBHSTSTS 0x00
#define PIIX4_SMBHSTSTAT_BUSY (1<<0)
#define PIIX4_SMBHSTSTAT_INTR (1<<1)
#define PIIX4_SMBHSTSTAT_ERR (1<<2)
#define PIIX4_SMBHSTSTAT_BUSC (1<<3)
#define PIIX4_SMBHSTSTAT_FAIL (1<<4)
#define PIIX4_SMBSLVSTS 0x01
#define PIIX4_SMBSLVSTS_ALART (1<<5)
#define PIIX4_SMBSLVSTS_SDW2 (1<<4)
#define PIIX4_SMBSLVSTS_SDW1 (1<<3)
#define PIIX4_SMBSLVSTS_SLV (1<<2)
#define PIIX4_SMBSLVSTS_BUSY (1<<0)
#define PIIX4_SMBHSTCNT 0x02
#define PIIX4_SMBHSTCNT_START (1<<6)
#define PIIX4_SMBHSTCNT_PROT_QUICK 0
#define PIIX4_SMBHSTCNT_PROT_BYTE (1<<2)
#define PIIX4_SMBHSTCNT_PROT_BDATA (2<<2)
#define PIIX4_SMBHSTCNT_PROT_WDATA (3<<2)
#define PIIX4_SMBHSTCNT_PROT_BLOCK (5<<2)
#define SMBBLOCKTRANS_MAX 32
#define PIIX4_SMBHSTCNT_KILL (1<<1)
#define PIIX4_SMBHSTCNT_INTREN (1)
#define PIIX4_SMBHSTCMD 0x03
#define PIIX4_SMBHSTADD 0x04
#define PIIX4_SMBHSTDAT0 0x05
#define PIIX4_SMBHSTDAT1 0x06
#define PIIX4_SMBBLKDAT 0x07
#define PIIX4_SMBSLVCNT 0x08
#define PIIX4_SMBSLVCNT_ALTEN (1<<3)
#define PIIX4_SMBSLVCNT_SD2EN (1<<2)
#define PIIX4_SMBSLVCNT_SD1EN (1<<1)
#define PIIX4_SMBSLVCNT_SLVEN (1)
#define PIIX4_SMBSLVCMD 0x09
#define PIIX4_SMBSLVEVT 0x0a
#define PIIX4_SMBSLVDAT 0x0c
/*This is SMBus alart response address*/
#define SMBALTRESP 0x18