mirror of
https://git.FreeBSD.org/src.git
synced 2024-12-15 10:17:20 +00:00
a2575e01e8
machine generates an NMI for each floating point error, just like an old XT. Since it is ISA only, reading the EISA status port yields 0xff, which would give a spurious EISA panic. The simplest thing to do is to ignore the 0xff.
515 lines
14 KiB
C
515 lines
14 KiB
C
/*-
|
|
* Copyright (c) 1991 The Regents of the University of California.
|
|
* All rights reserved.
|
|
*
|
|
* This code is derived from software contributed to Berkeley by
|
|
* William Jolitz.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by the University of
|
|
* California, Berkeley and its contributors.
|
|
* 4. Neither the name of the University nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* from: @(#)isa.c 7.2 (Berkeley) 5/13/91
|
|
* $Id: intr_machdep.c,v 1.6 1997/08/30 08:08:04 fsmp Exp $
|
|
*/
|
|
|
|
#include "opt_auto_eoi.h"
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/syslog.h>
|
|
#include <machine/ipl.h>
|
|
#include <machine/md_var.h>
|
|
#include <machine/segments.h>
|
|
#if defined(APIC_IO)
|
|
#include <machine/smp.h>
|
|
#include <machine/smptests.h> /** FAST_HI */
|
|
#endif /* APIC_IO */
|
|
#include <i386/isa/isa_device.h>
|
|
#ifdef PC98
|
|
#include <pc98/pc98/pc98.h>
|
|
#include <pc98/pc98/pc98_machdep.h>
|
|
#include <pc98/pc98/epsonio.h>
|
|
#else
|
|
#include <i386/isa/isa.h>
|
|
#endif
|
|
#include <i386/isa/icu.h>
|
|
#include "vector.h"
|
|
|
|
#include <i386/isa/intr_machdep.h>
|
|
#include <sys/interrupt.h>
|
|
|
|
/* XXX should be in suitable include files */
|
|
#ifdef PC98
|
|
#define ICU_IMR_OFFSET 2 /* IO_ICU{1,2} + 2 */
|
|
#define ICU_SLAVEID 7
|
|
#else
|
|
#define ICU_IMR_OFFSET 1 /* IO_ICU{1,2} + 1 */
|
|
#define ICU_SLAVEID 2
|
|
#endif
|
|
|
|
#ifdef APIC_IO
|
|
/*
|
|
* This is to accommodate "mixed-mode" programming for
|
|
* motherboards that don't connect the 8254 to the IO APIC.
|
|
*/
|
|
#define AUTO_EOI_1
|
|
#endif
|
|
|
|
u_long *intr_countp[ICU_LEN];
|
|
inthand2_t *intr_handler[ICU_LEN];
|
|
u_int intr_mask[ICU_LEN];
|
|
u_int* intr_mptr[ICU_LEN];
|
|
int intr_unit[ICU_LEN];
|
|
|
|
static inthand_t *fastintr[ICU_LEN] = {
|
|
&IDTVEC(fastintr0), &IDTVEC(fastintr1),
|
|
&IDTVEC(fastintr2), &IDTVEC(fastintr3),
|
|
&IDTVEC(fastintr4), &IDTVEC(fastintr5),
|
|
&IDTVEC(fastintr6), &IDTVEC(fastintr7),
|
|
&IDTVEC(fastintr8), &IDTVEC(fastintr9),
|
|
&IDTVEC(fastintr10), &IDTVEC(fastintr11),
|
|
&IDTVEC(fastintr12), &IDTVEC(fastintr13),
|
|
&IDTVEC(fastintr14), &IDTVEC(fastintr15)
|
|
#if defined(APIC_IO)
|
|
, &IDTVEC(fastintr16), &IDTVEC(fastintr17),
|
|
&IDTVEC(fastintr18), &IDTVEC(fastintr19),
|
|
&IDTVEC(fastintr20), &IDTVEC(fastintr21),
|
|
&IDTVEC(fastintr22), &IDTVEC(fastintr23)
|
|
#endif /* APIC_IO */
|
|
};
|
|
|
|
static inthand_t *slowintr[ICU_LEN] = {
|
|
&IDTVEC(intr0), &IDTVEC(intr1), &IDTVEC(intr2), &IDTVEC(intr3),
|
|
&IDTVEC(intr4), &IDTVEC(intr5), &IDTVEC(intr6), &IDTVEC(intr7),
|
|
&IDTVEC(intr8), &IDTVEC(intr9), &IDTVEC(intr10), &IDTVEC(intr11),
|
|
&IDTVEC(intr12), &IDTVEC(intr13), &IDTVEC(intr14), &IDTVEC(intr15)
|
|
#if defined(APIC_IO)
|
|
, &IDTVEC(intr16), &IDTVEC(intr17), &IDTVEC(intr18), &IDTVEC(intr19),
|
|
&IDTVEC(intr20), &IDTVEC(intr21), &IDTVEC(intr22), &IDTVEC(intr23)
|
|
#endif /* APIC_IO */
|
|
};
|
|
|
|
static inthand2_t isa_strayintr;
|
|
|
|
#ifdef PC98
|
|
#define NMI_PARITY 0x04
|
|
#define NMI_EPARITY 0x02
|
|
#else
|
|
#define NMI_PARITY (1 << 7)
|
|
#define NMI_IOCHAN (1 << 6)
|
|
#define ENMI_WATCHDOG (1 << 7)
|
|
#define ENMI_BUSTIMER (1 << 6)
|
|
#define ENMI_IOSTATUS (1 << 5)
|
|
#endif
|
|
|
|
/*
|
|
* Handle a NMI, possibly a machine check.
|
|
* return true to panic system, false to ignore.
|
|
*/
|
|
int
|
|
isa_nmi(cd)
|
|
int cd;
|
|
{
|
|
#ifdef PC98
|
|
int port = inb(0x33);
|
|
if (epson_machine_id == 0x20)
|
|
epson_outb(0xc16, epson_inb(0xc16) | 0x1);
|
|
if (port & NMI_PARITY) {
|
|
panic("BASE RAM parity error, likely hardware failure.");
|
|
} else if (port & NMI_EPARITY) {
|
|
panic("EXTENDED RAM parity error, likely hardware failure.");
|
|
} else {
|
|
printf("\nNMI Resume ??\n");
|
|
return(0);
|
|
}
|
|
#else /* IBM-PC */
|
|
int isa_port = inb(0x61);
|
|
int eisa_port = inb(0x461);
|
|
|
|
if (isa_port & NMI_PARITY)
|
|
panic("RAM parity error, likely hardware failure.");
|
|
|
|
if (isa_port & NMI_IOCHAN)
|
|
panic("I/O channel check, likely hardware failure.");
|
|
|
|
/*
|
|
* On a real EISA machine, this will never happen. However it can
|
|
* happen on ISA machines which implement XT style floating point
|
|
* error handling (very rare). Save them from a meaningless panic.
|
|
*/
|
|
if (eisa_port == 0xff)
|
|
return(0);
|
|
|
|
if (eisa_port & ENMI_WATCHDOG)
|
|
panic("EISA watchdog timer expired, likely hardware failure.");
|
|
|
|
if (eisa_port & ENMI_BUSTIMER)
|
|
panic("EISA bus timeout, likely hardware failure.");
|
|
|
|
if (eisa_port & ENMI_IOSTATUS)
|
|
panic("EISA I/O port status error.");
|
|
|
|
printf("\nNMI ISA %x, EISA %x\n", isa_port, eisa_port);
|
|
return(0);
|
|
#endif
|
|
}
|
|
|
|
/*
|
|
* Fill in default interrupt table (in case of spuruious interrupt
|
|
* during configuration of kernel, setup interrupt control unit
|
|
*/
|
|
void
|
|
isa_defaultirq()
|
|
{
|
|
int i;
|
|
|
|
/* icu vectors */
|
|
for (i = 0; i < ICU_LEN; i++)
|
|
icu_unset(i, (inthand2_t *)NULL);
|
|
|
|
/* initialize 8259's */
|
|
outb(IO_ICU1, 0x11); /* reset; program device, four bytes */
|
|
|
|
outb(IO_ICU1+ICU_IMR_OFFSET, NRSVIDT); /* starting at this vector index */
|
|
outb(IO_ICU1+ICU_IMR_OFFSET, IRQ_SLAVE); /* slave on line 7 */
|
|
#ifdef PC98
|
|
#ifdef AUTO_EOI_1
|
|
outb(IO_ICU1+ICU_IMR_OFFSET, 0x1f); /* (master) auto EOI, 8086 mode */
|
|
#else
|
|
outb(IO_ICU1+ICU_IMR_OFFSET, 0x1d); /* (master) 8086 mode */
|
|
#endif
|
|
#else /* IBM-PC */
|
|
#ifdef AUTO_EOI_1
|
|
outb(IO_ICU1+ICU_IMR_OFFSET, 2 | 1); /* auto EOI, 8086 mode */
|
|
#else
|
|
outb(IO_ICU1+ICU_IMR_OFFSET, 1); /* 8086 mode */
|
|
#endif
|
|
#endif /* PC98 */
|
|
outb(IO_ICU1+ICU_IMR_OFFSET, 0xff); /* leave interrupts masked */
|
|
outb(IO_ICU1, 0x0a); /* default to IRR on read */
|
|
#ifndef PC98
|
|
outb(IO_ICU1, 0xc0 | (3 - 1)); /* pri order 3-7, 0-2 (com2 first) */
|
|
#endif /* !PC98 */
|
|
|
|
outb(IO_ICU2, 0x11); /* reset; program device, four bytes */
|
|
outb(IO_ICU2+ICU_IMR_OFFSET, NRSVIDT+8); /* staring at this vector index */
|
|
outb(IO_ICU2+ICU_IMR_OFFSET, ICU_SLAVEID); /* my slave id is 7 */
|
|
#ifdef PC98
|
|
outb(IO_ICU2+ICU_IMR_OFFSET,9); /* 8086 mode */
|
|
#else /* IBM-PC */
|
|
#ifdef AUTO_EOI_2
|
|
outb(IO_ICU2+ICU_IMR_OFFSET, 2 | 1); /* auto EOI, 8086 mode */
|
|
#else
|
|
outb(IO_ICU2+ICU_IMR_OFFSET,1); /* 8086 mode */
|
|
#endif
|
|
#endif /* PC98 */
|
|
outb(IO_ICU2+ICU_IMR_OFFSET, 0xff); /* leave interrupts masked */
|
|
outb(IO_ICU2, 0x0a); /* default to IRR on read */
|
|
}
|
|
|
|
/*
|
|
* Caught a stray interrupt, notify
|
|
*/
|
|
static void
|
|
isa_strayintr(d)
|
|
int d;
|
|
{
|
|
|
|
/* DON'T BOTHER FOR NOW! */
|
|
/* for some reason, we get bursts of intr #7, even if not enabled! */
|
|
/*
|
|
* Well the reason you got bursts of intr #7 is because someone
|
|
* raised an interrupt line and dropped it before the 8259 could
|
|
* prioritize it. This is documented in the intel data book. This
|
|
* means you have BAD hardware! I have changed this so that only
|
|
* the first 5 get logged, then it quits logging them, and puts
|
|
* out a special message. rgrimes 3/25/1993
|
|
*/
|
|
/*
|
|
* XXX TODO print a different message for #7 if it is for a
|
|
* glitch. Glitches can be distinguished from real #7's by
|
|
* testing that the in-service bit is _not_ set. The test
|
|
* must be done before sending an EOI so it can't be done if
|
|
* we are using AUTO_EOI_1.
|
|
*/
|
|
if (intrcnt[NR_DEVICES + d] <= 5)
|
|
log(LOG_ERR, "stray irq %d\n", d);
|
|
if (intrcnt[NR_DEVICES + d] == 5)
|
|
log(LOG_CRIT,
|
|
"too many stray irq %d's; not logging any more\n", d);
|
|
}
|
|
|
|
/*
|
|
* Return nonzero if a (masked) irq is pending for a given device.
|
|
*/
|
|
#if defined(APIC_IO)
|
|
|
|
int
|
|
isa_irq_pending(dvp)
|
|
struct isa_device *dvp;
|
|
{
|
|
#ifdef FAST_HI
|
|
/* XXX not quite right for >1 IO APIC yet */
|
|
if (dvp->id_ri_flags & RI_FAST)
|
|
/* read APIC IRR containing the FAST INTerrupts */
|
|
return ((lapic.irr3 & 0x00ffffff)
|
|
& (u_int32_t)dvp->id_irq) ? 1 : 0;
|
|
else
|
|
#endif /* FAST_HI */
|
|
/* read APIC IRR containing the SLOW INTerrupts */
|
|
return ((lapic.irr1 & 0x00ffffff)
|
|
& (u_int32_t)dvp->id_irq) ? 1 : 0;
|
|
}
|
|
|
|
/*
|
|
* an 8259 specific routine,
|
|
* for use by boot probes in certain device drivers.
|
|
*/
|
|
int
|
|
icu_irq_pending(dvp)
|
|
struct isa_device *dvp;
|
|
{
|
|
unsigned id_irq;
|
|
id_irq = dvp->id_irq;
|
|
if (id_irq & 0xff)
|
|
return (inb(IO_ICU1) & id_irq);
|
|
return (inb(IO_ICU2) & (id_irq >> 8));
|
|
}
|
|
|
|
#else /* APIC_IO */
|
|
|
|
int
|
|
isa_irq_pending(dvp)
|
|
struct isa_device *dvp;
|
|
{
|
|
unsigned id_irq;
|
|
id_irq = dvp->id_irq;
|
|
if (id_irq & 0xff)
|
|
return (inb(IO_ICU1) & id_irq);
|
|
return (inb(IO_ICU2) & (id_irq >> 8));
|
|
}
|
|
|
|
#endif /* APIC_IO */
|
|
|
|
int
|
|
update_intr_masks(void)
|
|
{
|
|
int intr, n=0;
|
|
u_int mask,*maskptr;
|
|
|
|
for (intr=0; intr < ICU_LEN; intr ++) {
|
|
#if defined(APIC_IO)
|
|
/* no 8259 SLAVE to ignore */
|
|
#else
|
|
if (intr==ICU_SLAVEID) continue; /* ignore 8259 SLAVE output */
|
|
#endif /* APIC_IO */
|
|
maskptr = intr_mptr[intr];
|
|
if (!maskptr) continue;
|
|
*maskptr |= 1 << intr;
|
|
mask = *maskptr;
|
|
if (mask != intr_mask[intr]) {
|
|
#if 0
|
|
printf ("intr_mask[%2d] old=%08x new=%08x ptr=%p.\n",
|
|
intr, intr_mask[intr], mask, maskptr);
|
|
#endif
|
|
intr_mask[intr]=mask;
|
|
n++;
|
|
}
|
|
|
|
}
|
|
return (n);
|
|
}
|
|
|
|
/*
|
|
* The find_device_id function is only required because of the way the
|
|
* device names are currently stored for reporting in systat or vmstat.
|
|
* In fact, those programs should be modified to use the sysctl interface
|
|
* to obtain a list of driver names by traversing intreclist_head[irq].
|
|
*/
|
|
static int
|
|
find_device_id(int irq)
|
|
{
|
|
char buf[16];
|
|
char *cp;
|
|
int free_id, id;
|
|
|
|
sprintf(buf, "pci irq%d", irq);
|
|
cp = intrnames;
|
|
/* default to 0, which corresponds to clk0 */
|
|
free_id = 0;
|
|
|
|
for (id = 0; id < NR_DEVICES; id++) {
|
|
if (strcmp(cp, buf) == 0)
|
|
return (id);
|
|
if (free_id == 0 && strcmp(cp, "pci irqnn") == 0)
|
|
free_id = id;
|
|
while (*cp++ != '\0');
|
|
}
|
|
#if 0
|
|
if (free_id == 0) {
|
|
/*
|
|
* All pci irq counters are in use, perhaps because config
|
|
* is old so there aren't any. Abuse the clk0 counter.
|
|
*/
|
|
printf("\tcounting shared irq%d as clk0 irq\n", irq);
|
|
}
|
|
#endif
|
|
return (free_id);
|
|
}
|
|
|
|
void
|
|
update_intrname(int intr, int device_id)
|
|
{
|
|
char *cp;
|
|
int id;
|
|
|
|
if (device_id == -1)
|
|
device_id = find_device_id(intr);
|
|
|
|
if ((u_int)device_id >= NR_DEVICES)
|
|
return;
|
|
|
|
intr_countp[intr] = &intrcnt[device_id];
|
|
|
|
for (cp = intrnames, id = 0; id <= device_id; id++)
|
|
while (*cp++ != '\0')
|
|
;
|
|
if (cp > eintrnames)
|
|
return;
|
|
if (intr < 10) {
|
|
cp[-3] = intr + '0';
|
|
cp[-2] = ' ';
|
|
} else if (intr < 20) {
|
|
cp[-3] = '1';
|
|
cp[-2] = intr - 10 + '0';
|
|
} else {
|
|
cp[-3] = '2';
|
|
cp[-2] = intr - 20 + '0';
|
|
}
|
|
}
|
|
|
|
|
|
int
|
|
icu_setup(int intr, inthand2_t *handler, void *arg, u_int *maskptr, int flags)
|
|
{
|
|
#ifdef FAST_HI
|
|
int select; /* the select register is 8 bits */
|
|
int vector;
|
|
u_int32_t value; /* the window register is 32 bits */
|
|
#endif /* FAST_HI */
|
|
u_long ef;
|
|
u_int mask = (maskptr ? *maskptr : 0);
|
|
|
|
#if defined(APIC_IO)
|
|
if ((u_int)intr >= ICU_LEN) /* no 8259 SLAVE to ignore */
|
|
#else
|
|
if ((u_int)intr >= ICU_LEN || intr == ICU_SLAVEID)
|
|
#endif /* APIC_IO */
|
|
if (intr_handler[intr] != isa_strayintr)
|
|
return (EBUSY);
|
|
|
|
ef = read_eflags();
|
|
disable_intr();
|
|
intr_handler[intr] = handler;
|
|
intr_mptr[intr] = maskptr;
|
|
intr_mask[intr] = mask | (1 << intr);
|
|
intr_unit[intr] = (int) arg;
|
|
#ifdef FAST_HI
|
|
if (flags & INTR_FAST) {
|
|
vector = TPR_FAST_INTS + intr;
|
|
setidt(vector, fastintr[intr],
|
|
SDT_SYS386IGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL));
|
|
|
|
/*
|
|
* XXX MULTIPLE_IOAPICSXXX
|
|
* Reprogram the vector in the IO APIC.
|
|
*/
|
|
select = (intr * 2) + IOAPIC_REDTBL0;
|
|
value = io_apic_read(0, select) & ~IOART_INTVEC;
|
|
io_apic_write(0, select, value | vector);
|
|
}
|
|
else
|
|
setidt(TPR_SLOW_INTS + intr, slowintr[intr],
|
|
SDT_SYS386IGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL));
|
|
|
|
#else
|
|
setidt(ICU_OFFSET + intr,
|
|
flags & INTR_FAST ? fastintr[intr] : slowintr[intr],
|
|
SDT_SYS386IGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL));
|
|
#endif /* FAST_HI */
|
|
INTREN(1 << intr);
|
|
MPINTR_UNLOCK();
|
|
write_eflags(ef);
|
|
return (0);
|
|
}
|
|
|
|
void
|
|
register_imask(dvp, mask)
|
|
struct isa_device *dvp;
|
|
u_int mask;
|
|
{
|
|
if (dvp->id_alive && dvp->id_irq) {
|
|
int intr;
|
|
|
|
intr = ffs(dvp->id_irq) - 1;
|
|
intr_mask[intr] = mask | (1 <<intr);
|
|
}
|
|
(void) update_intr_masks();
|
|
}
|
|
|
|
int
|
|
icu_unset(intr, handler)
|
|
int intr;
|
|
inthand2_t *handler;
|
|
{
|
|
u_long ef;
|
|
|
|
if ((u_int)intr >= ICU_LEN || handler != intr_handler[intr])
|
|
return (EINVAL);
|
|
|
|
INTRDIS(1 << intr);
|
|
ef = read_eflags();
|
|
disable_intr();
|
|
intr_countp[intr] = &intrcnt[NR_DEVICES + intr];
|
|
intr_handler[intr] = isa_strayintr;
|
|
intr_mptr[intr] = NULL;
|
|
intr_mask[intr] = HWI_MASK | SWI_MASK;
|
|
intr_unit[intr] = intr;
|
|
#ifdef FAST_HI_XXX
|
|
/* XXX how do I re-create dvp here? */
|
|
setidt(flags & INTR_FAST ? TPR_FAST_INTS + intr : TPR_SLOW_INTS + intr,
|
|
slowintr[intr], SDT_SYS386IGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL));
|
|
#else /* FAST_HI */
|
|
setidt(ICU_OFFSET + intr, slowintr[intr], SDT_SYS386IGT, SEL_KPL,
|
|
GSEL(GCODE_SEL, SEL_KPL));
|
|
#endif /* FAST_HI */
|
|
MPINTR_UNLOCK();
|
|
write_eflags(ef);
|
|
return (0);
|
|
}
|