mirror of
https://git.FreeBSD.org/src.git
synced 2024-12-26 11:47:31 +00:00
7812d86f03
and predictable way, and I apologize if I have gotten it wrong anywhere, getting prior review on a patch like this is not feasible, considering the number of people involved and hardware availability etc.) If struct disklabel is the messenger: kill the messenger. Inside struct disk we had a struct disklabel which disk drivers used to communicate certain metrics to the disklayer above (GEOM or the disk mini-layer). This commit changes this communication to use four explicit fields instead. Amongst the benefits is that the fields do not get overwritten by wrong or bogus on-disk disklabels. Once that is clear, <sys/disk.h> which is included in the drivers no longer need to pull <sys/disklabel.h> and <sys/diskslice.h> in, the few places that needs them, have gotten explicit #includes for them. The disklabel inside struct disk is now only for internal use in the disk mini-layer, so instead of embedding it, we malloc it as we need it. This concludes (modulus any mistakes) the series of disklabel related commits. I belive it all amounts to a NOP for all the rest of you :-) Sponsored by: DARPA & NAI Labs.
934 lines
29 KiB
C
934 lines
29 KiB
C
/*-
|
|
* Copyright (c) 1998,1999,2000,2001,2002 Søren Schmidt <sos@FreeBSD.org>
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer,
|
|
* without modification, immediately at the beginning of the file.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
#include "opt_ata.h"
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/ata.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/bio.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/conf.h>
|
|
#include <sys/disk.h>
|
|
#include <sys/devicestat.h>
|
|
#include <sys/cons.h>
|
|
#include <sys/sysctl.h>
|
|
#include <vm/vm.h>
|
|
#include <vm/pmap.h>
|
|
#include <machine/md_var.h>
|
|
#include <machine/bus.h>
|
|
#include <sys/rman.h>
|
|
#include <dev/ata/ata-all.h>
|
|
#include <dev/ata/ata-disk.h>
|
|
#include <dev/ata/ata-raid.h>
|
|
|
|
/* device structures */
|
|
static d_open_t adopen;
|
|
static d_close_t adclose;
|
|
static d_strategy_t adstrategy;
|
|
static d_dump_t addump;
|
|
static struct cdevsw ad_cdevsw = {
|
|
/* open */ adopen,
|
|
/* close */ adclose,
|
|
/* read */ physread,
|
|
/* write */ physwrite,
|
|
/* ioctl */ noioctl,
|
|
/* poll */ nopoll,
|
|
/* mmap */ nommap,
|
|
/* strategy */ adstrategy,
|
|
/* name */ "ad",
|
|
/* maj */ 116,
|
|
/* dump */ addump,
|
|
/* psize */ nopsize,
|
|
/* flags */ D_DISK,
|
|
};
|
|
static struct cdevsw addisk_cdevsw;
|
|
|
|
/* prototypes */
|
|
static void ad_invalidatequeue(struct ad_softc *, struct ad_request *);
|
|
static int ad_tagsupported(struct ad_softc *);
|
|
static void ad_timeout(struct ad_request *);
|
|
static void ad_free(struct ad_request *);
|
|
static int ad_version(u_int16_t);
|
|
|
|
/* misc defines */
|
|
#define AD_MAX_RETRIES 3
|
|
|
|
/* internal vars */
|
|
static u_int32_t adp_lun_map = 0;
|
|
static int ata_dma = 1;
|
|
static int ata_wc = 1;
|
|
static int ata_tags = 0;
|
|
TUNABLE_INT("hw.ata.ata_dma", &ata_dma);
|
|
TUNABLE_INT("hw.ata.wc", &ata_wc);
|
|
TUNABLE_INT("hw.ata.tags", &ata_tags);
|
|
static MALLOC_DEFINE(M_AD, "AD driver", "ATA disk driver");
|
|
|
|
/* sysctl vars */
|
|
SYSCTL_DECL(_hw_ata);
|
|
SYSCTL_INT(_hw_ata, OID_AUTO, ata_dma, CTLFLAG_RD, &ata_dma, 0,
|
|
"ATA disk DMA mode control");
|
|
SYSCTL_INT(_hw_ata, OID_AUTO, wc, CTLFLAG_RD, &ata_wc, 0,
|
|
"ATA disk write caching");
|
|
SYSCTL_INT(_hw_ata, OID_AUTO, tags, CTLFLAG_RD, &ata_tags, 0,
|
|
"ATA disk tagged queuing support");
|
|
|
|
void
|
|
ad_attach(struct ata_device *atadev)
|
|
{
|
|
struct ad_softc *adp;
|
|
dev_t dev;
|
|
u_int32_t lbasize;
|
|
u_int64_t lbasize48;
|
|
|
|
if (!(adp = malloc(sizeof(struct ad_softc), M_AD, M_NOWAIT | M_ZERO))) {
|
|
ata_prtdev(atadev, "failed to allocate driver storage\n");
|
|
return;
|
|
}
|
|
adp->device = atadev;
|
|
#ifdef ATA_STATIC_ID
|
|
adp->lun = (device_get_unit(atadev->channel->dev)<<1)+ATA_DEV(atadev->unit);
|
|
#else
|
|
adp->lun = ata_get_lun(&adp_lun_map);
|
|
#endif
|
|
ata_set_name(atadev, "ad", adp->lun);
|
|
adp->heads = atadev->param->heads;
|
|
adp->sectors = atadev->param->sectors;
|
|
adp->total_secs = atadev->param->cylinders * adp->heads * adp->sectors;
|
|
adp->max_iosize = 256 * DEV_BSIZE;
|
|
bioq_init(&adp->queue);
|
|
|
|
lbasize = (u_int32_t)atadev->param->lba_size_1 |
|
|
((u_int32_t)atadev->param->lba_size_2 << 16);
|
|
|
|
/* does this device need oldstyle CHS addressing */
|
|
if (!ad_version(atadev->param->version_major) ||
|
|
!(atadev->param->atavalid & ATA_FLAG_54_58) || !lbasize)
|
|
adp->flags |= AD_F_CHS_USED;
|
|
|
|
/* use the 28bit LBA size if valid */
|
|
if (atadev->param->cylinders == 16383 && adp->total_secs < lbasize)
|
|
adp->total_secs = lbasize;
|
|
|
|
lbasize48 = ((u_int64_t)atadev->param->lba_size48_1) |
|
|
((u_int64_t)atadev->param->lba_size48_2 << 16) |
|
|
((u_int64_t)atadev->param->lba_size48_3 << 32) |
|
|
((u_int64_t)atadev->param->lba_size48_4 << 48);
|
|
|
|
/* use the 48bit LBA size if valid */
|
|
if (atadev->param->support.address48 && lbasize48 > 268435455)
|
|
adp->total_secs = lbasize48;
|
|
|
|
ATA_SLEEPLOCK_CH(atadev->channel, ATA_CONTROL);
|
|
|
|
/* use multiple sectors/interrupt if device supports it */
|
|
adp->transfersize = DEV_BSIZE;
|
|
if (ad_version(atadev->param->version_major)) {
|
|
int secsperint = max(1, min(atadev->param->sectors_intr, 16));
|
|
|
|
if (!ata_command(atadev, ATA_C_SET_MULTI, 0, secsperint,
|
|
0, ATA_WAIT_INTR) && !ata_wait(atadev, 0))
|
|
adp->transfersize *= secsperint;
|
|
}
|
|
|
|
/* enable read caching if not default on device */
|
|
if (ata_command(atadev, ATA_C_SETFEATURES,
|
|
0, 0, ATA_C_F_ENAB_RCACHE, ATA_WAIT_INTR))
|
|
ata_prtdev(atadev, "enabling readahead cache failed\n");
|
|
|
|
/* enable write caching if allowed and not default on device */
|
|
if (ata_wc || (ata_tags && ad_tagsupported(adp))) {
|
|
if (ata_command(atadev, ATA_C_SETFEATURES,
|
|
0, 0, ATA_C_F_ENAB_WCACHE, ATA_WAIT_INTR))
|
|
ata_prtdev(atadev, "enabling write cache failed\n");
|
|
}
|
|
else {
|
|
if (ata_command(atadev, ATA_C_SETFEATURES,
|
|
0, 0, ATA_C_F_DIS_WCACHE, ATA_WAIT_INTR))
|
|
ata_prtdev(atadev, "disabling write cache failed\n");
|
|
}
|
|
|
|
/* use DMA if allowed and if drive/controller supports it */
|
|
if (ata_dma)
|
|
ata_dmainit(atadev, ata_pmode(atadev->param),
|
|
ata_wmode(atadev->param), ata_umode(atadev->param));
|
|
else
|
|
ata_dmainit(atadev, ata_pmode(atadev->param), -1, -1);
|
|
|
|
/* use tagged queueing if allowed and supported */
|
|
if (ata_tags && ad_tagsupported(adp)) {
|
|
adp->num_tags = atadev->param->queuelen;
|
|
adp->flags |= AD_F_TAG_ENABLED;
|
|
adp->device->channel->flags |= ATA_QUEUED;
|
|
if (ata_command(atadev, ATA_C_SETFEATURES,
|
|
0, 0, ATA_C_F_DIS_RELIRQ, ATA_WAIT_INTR))
|
|
ata_prtdev(atadev, "disabling release interrupt failed\n");
|
|
if (ata_command(atadev, ATA_C_SETFEATURES,
|
|
0, 0, ATA_C_F_DIS_SRVIRQ, ATA_WAIT_INTR))
|
|
ata_prtdev(atadev, "disabling service interrupt failed\n");
|
|
}
|
|
|
|
ATA_UNLOCK_CH(atadev->channel);
|
|
|
|
devstat_add_entry(&adp->stats, "ad", adp->lun, DEV_BSIZE,
|
|
DEVSTAT_NO_ORDERED_TAGS,
|
|
DEVSTAT_TYPE_DIRECT | DEVSTAT_TYPE_IF_IDE,
|
|
DEVSTAT_PRIORITY_DISK);
|
|
|
|
dev = disk_create(adp->lun, &adp->disk, 0, &ad_cdevsw, &addisk_cdevsw);
|
|
dev->si_drv1 = adp;
|
|
dev->si_iosize_max = adp->max_iosize;
|
|
adp->dev = dev;
|
|
|
|
adp->disk.d_sectorsize = DEV_BSIZE;
|
|
adp->disk.d_mediasize = DEV_BSIZE * (off_t)adp->total_secs;
|
|
adp->disk.d_fwsectors = adp->sectors;
|
|
adp->disk.d_fwheads = adp->heads;
|
|
|
|
atadev->driver = adp;
|
|
atadev->flags = 0;
|
|
|
|
/* if this disk belongs to an ATA RAID dont print the probe */
|
|
if (ata_raiddisk_attach(adp))
|
|
adp->flags |= AD_F_RAID_SUBDISK;
|
|
else
|
|
ad_print(adp);
|
|
}
|
|
|
|
void
|
|
ad_detach(struct ata_device *atadev, int flush) /* get rid of flush XXX SOS */
|
|
{
|
|
struct ad_softc *adp = atadev->driver;
|
|
struct ad_request *request;
|
|
struct bio *bp;
|
|
|
|
atadev->flags |= ATA_D_DETACHING;
|
|
ata_prtdev(atadev, "removed from configuration\n");
|
|
ad_invalidatequeue(adp, NULL);
|
|
TAILQ_FOREACH(request, &atadev->channel->ata_queue, chain) {
|
|
if (request->softc != adp)
|
|
continue;
|
|
TAILQ_REMOVE(&atadev->channel->ata_queue, request, chain);
|
|
biofinish(request->bp, NULL, ENXIO);
|
|
ad_free(request);
|
|
}
|
|
ata_dmafree(atadev);
|
|
while ((bp = bioq_first(&adp->queue))) {
|
|
bioq_remove(&adp->queue, bp);
|
|
biofinish(bp, NULL, ENXIO);
|
|
}
|
|
disk_invalidate(&adp->disk);
|
|
disk_destroy(adp->dev);
|
|
devstat_remove_entry(&adp->stats);
|
|
if (flush) {
|
|
if (ata_command(atadev, ATA_C_FLUSHCACHE, 0, 0, 0, ATA_WAIT_READY))
|
|
ata_prtdev(atadev, "flushing cache on detach failed\n");
|
|
}
|
|
if (adp->flags & AD_F_RAID_SUBDISK)
|
|
ata_raiddisk_detach(adp);
|
|
ata_free_name(atadev);
|
|
ata_free_lun(&adp_lun_map, adp->lun);
|
|
atadev->driver = NULL;
|
|
atadev->flags = 0;
|
|
free(adp, M_AD);
|
|
}
|
|
|
|
static int
|
|
adopen(dev_t dev, int flags, int fmt, struct thread *td)
|
|
{
|
|
struct ad_softc *adp = dev->si_drv1;
|
|
|
|
if (adp->flags & AD_F_RAID_SUBDISK)
|
|
return EBUSY;
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
adclose(dev_t dev, int flags, int fmt, struct thread *td)
|
|
{
|
|
struct ad_softc *adp = dev->si_drv1;
|
|
|
|
ATA_SLEEPLOCK_CH(adp->device->channel, ATA_CONTROL);
|
|
if (ata_command(adp->device, ATA_C_FLUSHCACHE, 0, 0, 0, ATA_WAIT_READY))
|
|
ata_prtdev(adp->device, "flushing cache on close failed\n");
|
|
ATA_UNLOCK_CH(adp->device->channel);
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
adstrategy(struct bio *bp)
|
|
{
|
|
struct ad_softc *adp = bp->bio_dev->si_drv1;
|
|
int s;
|
|
|
|
if (adp->device->flags & ATA_D_DETACHING) {
|
|
biofinish(bp, NULL, ENXIO);
|
|
return;
|
|
}
|
|
s = splbio();
|
|
bioqdisksort(&adp->queue, bp);
|
|
splx(s);
|
|
ata_start(adp->device->channel);
|
|
}
|
|
|
|
static int
|
|
addump(dev_t dev, void *virtual, vm_offset_t physical, off_t offset, size_t length)
|
|
{
|
|
struct ad_softc *adp = dev->si_drv1;
|
|
struct ad_request request;
|
|
static int once;
|
|
|
|
if (!adp)
|
|
return ENXIO;
|
|
|
|
if (!once) {
|
|
/* force PIO mode for dumps */
|
|
adp->device->mode = ATA_PIO;
|
|
ata_reinit(adp->device->channel);
|
|
once = 1;
|
|
}
|
|
|
|
if (length > 0) {
|
|
bzero(&request, sizeof(struct ad_request));
|
|
request.softc = adp;
|
|
request.blockaddr = offset / DEV_BSIZE;
|
|
request.bytecount = length;
|
|
request.data = virtual;
|
|
|
|
while (request.bytecount > 0) {
|
|
ad_transfer(&request);
|
|
if (request.flags & ADR_F_ERROR)
|
|
return EIO;
|
|
request.donecount += request.currentsize;
|
|
request.bytecount -= request.currentsize;
|
|
DELAY(20);
|
|
}
|
|
} else {
|
|
if (ata_wait(adp->device, ATA_S_READY | ATA_S_DSC) < 0)
|
|
ata_prtdev(adp->device, "timeout waiting for final ready\n");
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
void
|
|
ad_start(struct ata_device *atadev)
|
|
{
|
|
struct ad_softc *adp = atadev->driver;
|
|
struct bio *bp = bioq_first(&adp->queue);
|
|
struct ad_request *request;
|
|
int tag = 0;
|
|
|
|
if (!bp)
|
|
return;
|
|
|
|
/* if tagged queueing enabled get next free tag */
|
|
if (adp->flags & AD_F_TAG_ENABLED) {
|
|
while (tag <= adp->num_tags && adp->tags[tag])
|
|
tag++;
|
|
if (tag > adp->num_tags )
|
|
return;
|
|
}
|
|
|
|
if (!(request = malloc(sizeof(struct ad_request), M_AD, M_NOWAIT|M_ZERO))) {
|
|
ata_prtdev(atadev, "out of memory in start\n");
|
|
return;
|
|
}
|
|
|
|
/* setup request */
|
|
request->softc = adp;
|
|
request->bp = bp;
|
|
request->blockaddr = bp->bio_pblkno;
|
|
request->bytecount = bp->bio_bcount;
|
|
request->data = bp->bio_data;
|
|
request->tag = tag;
|
|
if (bp->bio_cmd == BIO_READ)
|
|
request->flags |= ADR_F_READ;
|
|
|
|
if (adp->device->mode >= ATA_DMA && ata_dmaalloc(atadev))
|
|
adp->device->mode = ATA_PIO;
|
|
|
|
/* insert in tag array */
|
|
adp->tags[tag] = request;
|
|
|
|
/* remove from drive queue */
|
|
bioq_remove(&adp->queue, bp);
|
|
|
|
/* link onto controller queue */
|
|
TAILQ_INSERT_TAIL(&atadev->channel->ata_queue, request, chain);
|
|
}
|
|
|
|
int
|
|
ad_transfer(struct ad_request *request)
|
|
{
|
|
struct ad_softc *adp;
|
|
u_int64_t lba;
|
|
u_int32_t count;
|
|
u_int8_t cmd;
|
|
int flags = ATA_IMMEDIATE;
|
|
|
|
/* get request params */
|
|
adp = request->softc;
|
|
|
|
/* calculate transfer details */
|
|
lba = request->blockaddr + (request->donecount / DEV_BSIZE);
|
|
|
|
/* start timeout for this transfer */
|
|
if (!request->timeout_handle.callout && !dumping)
|
|
request->timeout_handle =
|
|
timeout((timeout_t*)ad_timeout, request, 10 * hz);
|
|
|
|
if (request->donecount == 0) {
|
|
|
|
/* check & setup transfer parameters */
|
|
if (request->bytecount > adp->max_iosize) {
|
|
ata_prtdev(adp->device,
|
|
"%d byte transfers not supported\n", request->bytecount);
|
|
count = howmany(adp->max_iosize, DEV_BSIZE);
|
|
}
|
|
else
|
|
count = howmany(request->bytecount, DEV_BSIZE);
|
|
|
|
if (count > (adp->device->param->support.address48 ? 65536 : 256)) {
|
|
ata_prtdev(adp->device,
|
|
"%d block transfers not supported\n", count);
|
|
count = adp->device->param->support.address48 ? 65536 : 256;
|
|
}
|
|
|
|
if (adp->flags & AD_F_CHS_USED) {
|
|
int sector = (lba % adp->sectors) + 1;
|
|
int cylinder = lba / (adp->sectors * adp->heads);
|
|
int head = (lba % (adp->sectors * adp->heads)) / adp->sectors;
|
|
|
|
lba = (sector&0xff) | ((cylinder&0xffff)<<8) | ((head&0xf)<<24);
|
|
adp->device->flags |= ATA_D_USE_CHS;
|
|
}
|
|
|
|
devstat_start_transaction(&adp->stats);
|
|
|
|
/* does this drive & transfer work with DMA ? */
|
|
request->flags &= ~ADR_F_DMA_USED;
|
|
if (adp->device->mode >= ATA_DMA &&
|
|
!ata_dmasetup(adp->device, request->data, request->bytecount)) {
|
|
request->flags |= ADR_F_DMA_USED;
|
|
request->currentsize = request->bytecount;
|
|
|
|
/* do we have tags enabled ? */
|
|
if (adp->flags & AD_F_TAG_ENABLED) {
|
|
cmd = (request->flags & ADR_F_READ) ?
|
|
ATA_C_READ_DMA_QUEUED : ATA_C_WRITE_DMA_QUEUED;
|
|
|
|
if (ata_command(adp->device, cmd, lba,
|
|
request->tag << 3, count, flags)) {
|
|
ata_prtdev(adp->device, "error executing command");
|
|
goto transfer_failed;
|
|
}
|
|
if (ata_wait(adp->device, ATA_S_READY)) {
|
|
ata_prtdev(adp->device, "timeout waiting for READY\n");
|
|
goto transfer_failed;
|
|
}
|
|
adp->outstanding++;
|
|
|
|
/* if ATA bus RELEASE check for SERVICE */
|
|
if (adp->flags & AD_F_TAG_ENABLED &&
|
|
ATA_INB(adp->device->channel->r_io, ATA_IREASON) &
|
|
ATA_I_RELEASE)
|
|
return ad_service(adp, 1);
|
|
}
|
|
else {
|
|
cmd = (request->flags & ADR_F_READ) ?
|
|
ATA_C_READ_DMA : ATA_C_WRITE_DMA;
|
|
|
|
if (ata_command(adp->device, cmd, lba, count, 0, flags)) {
|
|
ata_prtdev(adp->device, "error executing command");
|
|
goto transfer_failed;
|
|
}
|
|
#if 0
|
|
/*
|
|
* wait for data transfer phase
|
|
*
|
|
* well this should be here acording to specs, but older
|
|
* promise controllers doesn't like it, they lockup!
|
|
*/
|
|
if (ata_wait(adp->device, ATA_S_READY | ATA_S_DRQ)) {
|
|
ata_prtdev(adp->device, "timeout waiting for data phase\n");
|
|
goto transfer_failed;
|
|
}
|
|
#endif
|
|
}
|
|
|
|
/* start transfer, return and wait for interrupt */
|
|
ata_dmastart(adp->device, request->data, request->bytecount,
|
|
request->flags & ADR_F_READ);
|
|
return ATA_OP_CONTINUES;
|
|
}
|
|
|
|
/* does this drive support multi sector transfers ? */
|
|
if (adp->transfersize > DEV_BSIZE)
|
|
cmd = request->flags&ADR_F_READ ? ATA_C_READ_MUL : ATA_C_WRITE_MUL;
|
|
|
|
/* just plain old single sector transfer */
|
|
else
|
|
cmd = request->flags&ADR_F_READ ? ATA_C_READ : ATA_C_WRITE;
|
|
|
|
if (ata_command(adp->device, cmd, lba, count, 0, flags)){
|
|
ata_prtdev(adp->device, "error executing command");
|
|
goto transfer_failed;
|
|
}
|
|
}
|
|
|
|
/* calculate this transfer length */
|
|
request->currentsize = min(request->bytecount, adp->transfersize);
|
|
|
|
/* if this is a PIO read operation, return and wait for interrupt */
|
|
if (request->flags & ADR_F_READ)
|
|
return ATA_OP_CONTINUES;
|
|
|
|
/* ready to write PIO data ? */
|
|
if (ata_wait(adp->device, (ATA_S_READY | ATA_S_DSC | ATA_S_DRQ)) < 0) {
|
|
ata_prtdev(adp->device, "timeout waiting for DRQ");
|
|
goto transfer_failed;
|
|
}
|
|
|
|
/* output the data */
|
|
if (adp->device->channel->flags & ATA_USE_16BIT)
|
|
ATA_OUTSW_STRM(adp->device->channel->r_io, ATA_DATA,
|
|
(void *)((uintptr_t)request->data + request->donecount),
|
|
request->currentsize / sizeof(int16_t));
|
|
else
|
|
ATA_OUTSL_STRM(adp->device->channel->r_io, ATA_DATA,
|
|
(void *)((uintptr_t)request->data + request->donecount),
|
|
request->currentsize / sizeof(int32_t));
|
|
return ATA_OP_CONTINUES;
|
|
|
|
transfer_failed:
|
|
untimeout((timeout_t *)ad_timeout, request, request->timeout_handle);
|
|
ad_invalidatequeue(adp, request);
|
|
|
|
/* if retries still permit, reinject this request */
|
|
if (request->retries++ < AD_MAX_RETRIES)
|
|
TAILQ_INSERT_HEAD(&adp->device->channel->ata_queue, request, chain);
|
|
else {
|
|
/* retries all used up, return error */
|
|
request->bp->bio_error = EIO;
|
|
request->bp->bio_flags |= BIO_ERROR;
|
|
request->bp->bio_resid = request->bytecount;
|
|
biofinish(request->bp, &adp->stats, 0);
|
|
ad_free(request);
|
|
}
|
|
ata_reinit(adp->device->channel);
|
|
return ATA_OP_CONTINUES;
|
|
}
|
|
|
|
int
|
|
ad_interrupt(struct ad_request *request)
|
|
{
|
|
struct ad_softc *adp = request->softc;
|
|
int dma_stat = 0;
|
|
|
|
/* finish DMA transfer */
|
|
if (request->flags & ADR_F_DMA_USED)
|
|
dma_stat = ata_dmadone(adp->device);
|
|
|
|
/* do we have a corrected soft error ? */
|
|
if (adp->device->channel->status & ATA_S_CORR)
|
|
disk_err(request->bp, "soft error (ECC corrected)",
|
|
request->blockaddr + (request->donecount / DEV_BSIZE), 1);
|
|
|
|
/* did any real errors happen ? */
|
|
if ((adp->device->channel->status & ATA_S_ERROR) ||
|
|
(request->flags & ADR_F_DMA_USED && dma_stat & ATA_BMSTAT_ERROR)) {
|
|
adp->device->channel->error =
|
|
ATA_INB(adp->device->channel->r_io, ATA_ERROR);
|
|
disk_err(request->bp, (adp->device->channel->error & ATA_E_ICRC) ?
|
|
"UDMA ICRC error" : "hard error",
|
|
request->blockaddr + (request->donecount / DEV_BSIZE), 1);
|
|
|
|
/* if this is a UDMA CRC error, reinject request */
|
|
if (request->flags & ADR_F_DMA_USED &&
|
|
adp->device->channel->error & ATA_E_ICRC) {
|
|
untimeout((timeout_t *)ad_timeout, request,request->timeout_handle);
|
|
ad_invalidatequeue(adp, request);
|
|
|
|
if (request->retries++ < AD_MAX_RETRIES)
|
|
printf(" retrying\n");
|
|
else {
|
|
ata_dmainit(adp->device, ata_pmode(adp->device->param), -1, -1);
|
|
printf(" falling back to PIO mode\n");
|
|
}
|
|
TAILQ_INSERT_HEAD(&adp->device->channel->ata_queue, request, chain);
|
|
return ATA_OP_FINISHED;
|
|
}
|
|
|
|
/* if using DMA, try once again in PIO mode */
|
|
if (request->flags & ADR_F_DMA_USED) {
|
|
untimeout((timeout_t *)ad_timeout, request,request->timeout_handle);
|
|
ad_invalidatequeue(adp, request);
|
|
ata_dmainit(adp->device, ata_pmode(adp->device->param), -1, -1);
|
|
request->flags |= ADR_F_FORCE_PIO;
|
|
printf(" trying PIO mode\n");
|
|
TAILQ_INSERT_HEAD(&adp->device->channel->ata_queue, request, chain);
|
|
return ATA_OP_FINISHED;
|
|
}
|
|
|
|
request->flags |= ADR_F_ERROR;
|
|
printf(" status=%02x error=%02x\n",
|
|
adp->device->channel->status, adp->device->channel->error);
|
|
}
|
|
|
|
/* if we arrived here with forced PIO mode, DMA doesn't work right */
|
|
if (request->flags & ADR_F_FORCE_PIO && !(request->flags & ADR_F_ERROR))
|
|
ata_prtdev(adp->device, "DMA problem fallback to PIO mode\n");
|
|
|
|
/* if this was a PIO read operation, get the data */
|
|
if (!(request->flags & ADR_F_DMA_USED) &&
|
|
(request->flags & (ADR_F_READ | ADR_F_ERROR)) == ADR_F_READ) {
|
|
|
|
/* ready to receive data? */
|
|
if ((adp->device->channel->status & (ATA_S_READY|ATA_S_DSC|ATA_S_DRQ))
|
|
!= (ATA_S_READY|ATA_S_DSC|ATA_S_DRQ))
|
|
ata_prtdev(adp->device, "read interrupt arrived early");
|
|
|
|
if (ata_wait(adp->device, (ATA_S_READY | ATA_S_DSC | ATA_S_DRQ)) != 0) {
|
|
ata_prtdev(adp->device, "read error detected (too) late");
|
|
request->flags |= ADR_F_ERROR;
|
|
}
|
|
else {
|
|
/* data ready, read in */
|
|
if (adp->device->channel->flags & ATA_USE_16BIT)
|
|
ATA_INSW_STRM(adp->device->channel->r_io, ATA_DATA,
|
|
(void*)((uintptr_t)request->data +
|
|
request->donecount), request->currentsize /
|
|
sizeof(int16_t));
|
|
else
|
|
ATA_INSL_STRM(adp->device->channel->r_io, ATA_DATA,
|
|
(void*)((uintptr_t)request->data +
|
|
request->donecount), request->currentsize /
|
|
sizeof(int32_t));
|
|
}
|
|
}
|
|
|
|
/* finish up transfer */
|
|
if (request->flags & ADR_F_ERROR) {
|
|
request->bp->bio_error = EIO;
|
|
request->bp->bio_flags |= BIO_ERROR;
|
|
}
|
|
else {
|
|
request->bytecount -= request->currentsize;
|
|
request->donecount += request->currentsize;
|
|
if (!(request->flags & ADR_F_DMA_USED) && request->bytecount > 0) {
|
|
ad_transfer(request);
|
|
return ATA_OP_CONTINUES;
|
|
}
|
|
}
|
|
|
|
/* disarm timeout for this transfer */
|
|
untimeout((timeout_t *)ad_timeout, request, request->timeout_handle);
|
|
|
|
request->bp->bio_resid = request->bytecount;
|
|
|
|
biofinish(request->bp, &adp->stats, 0);
|
|
ad_free(request);
|
|
adp->outstanding--;
|
|
|
|
/* check for SERVICE */
|
|
return ad_service(adp, 1);
|
|
}
|
|
|
|
int
|
|
ad_service(struct ad_softc *adp, int change)
|
|
{
|
|
/* do we have to check the other device on this channel ? */
|
|
if (adp->device->channel->flags & ATA_QUEUED && change) {
|
|
int device = adp->device->unit;
|
|
|
|
if (adp->device->unit == ATA_MASTER) {
|
|
if ((adp->device->channel->devices & ATA_ATA_SLAVE) &&
|
|
(adp->device->channel->device[SLAVE].driver) &&
|
|
((struct ad_softc *) (adp->device->channel->
|
|
device[SLAVE].driver))->flags & AD_F_TAG_ENABLED)
|
|
device = ATA_SLAVE;
|
|
}
|
|
else {
|
|
if ((adp->device->channel->devices & ATA_ATA_MASTER) &&
|
|
(adp->device->channel->device[MASTER].driver) &&
|
|
((struct ad_softc *) (adp->device->channel->
|
|
device[MASTER].driver))->flags & AD_F_TAG_ENABLED)
|
|
device = ATA_MASTER;
|
|
}
|
|
if (device != adp->device->unit &&
|
|
((struct ad_softc *)
|
|
(adp->device->channel->
|
|
device[ATA_DEV(device)].driver))->outstanding > 0) {
|
|
ATA_OUTB(adp->device->channel->r_io, ATA_DRIVE, ATA_D_IBM | device);
|
|
adp = adp->device->channel->device[ATA_DEV(device)].driver;
|
|
DELAY(1);
|
|
}
|
|
}
|
|
adp->device->channel->status =
|
|
ATA_INB(adp->device->channel->r_altio, ATA_ALTSTAT);
|
|
|
|
/* do we have a SERVICE request from the drive ? */
|
|
if (adp->flags & AD_F_TAG_ENABLED &&
|
|
adp->outstanding > 0 &&
|
|
adp->device->channel->status & ATA_S_SERVICE) {
|
|
struct ad_request *request;
|
|
int tag;
|
|
|
|
/* check for error */
|
|
if (adp->device->channel->status & ATA_S_ERROR) {
|
|
ata_prtdev(adp->device, "Oops! controller says s=0x%02x e=0x%02x\n",
|
|
adp->device->channel->status,
|
|
adp->device->channel->error);
|
|
ad_invalidatequeue(adp, NULL);
|
|
return ATA_OP_FINISHED;
|
|
}
|
|
|
|
/* issue SERVICE cmd */
|
|
if (ata_command(adp->device, ATA_C_SERVICE, 0, 0, 0, ATA_IMMEDIATE)) {
|
|
ata_prtdev(adp->device, "problem executing SERVICE cmd\n");
|
|
ad_invalidatequeue(adp, NULL);
|
|
return ATA_OP_FINISHED;
|
|
}
|
|
|
|
/* setup the transfer environment when ready */
|
|
if (ata_wait(adp->device, ATA_S_READY)) {
|
|
ata_prtdev(adp->device, "SERVICE timeout tag=%d s=%02x e=%02x\n",
|
|
ATA_INB(adp->device->channel->r_io, ATA_COUNT) >> 3,
|
|
adp->device->channel->status,
|
|
adp->device->channel->error);
|
|
ad_invalidatequeue(adp, NULL);
|
|
return ATA_OP_FINISHED;
|
|
}
|
|
tag = ATA_INB(adp->device->channel->r_io, ATA_COUNT) >> 3;
|
|
if (!(request = adp->tags[tag])) {
|
|
ata_prtdev(adp->device, "no request for tag=%d\n", tag);
|
|
ad_invalidatequeue(adp, NULL);
|
|
return ATA_OP_FINISHED;
|
|
}
|
|
ATA_FORCELOCK_CH(adp->device->channel, ATA_ACTIVE_ATA);
|
|
adp->device->channel->running = request;
|
|
request->serv++;
|
|
|
|
/* start DMA transfer when ready */
|
|
if (ata_wait(adp->device, ATA_S_READY | ATA_S_DRQ)) {
|
|
ata_prtdev(adp->device, "timeout starting DMA s=%02x e=%02x\n",
|
|
adp->device->channel->status,
|
|
adp->device->channel->error);
|
|
ad_invalidatequeue(adp, NULL);
|
|
return ATA_OP_FINISHED;
|
|
}
|
|
ata_dmastart(adp->device, request->data, request->bytecount,
|
|
request->flags & ADR_F_READ);
|
|
return ATA_OP_CONTINUES;
|
|
}
|
|
return ATA_OP_FINISHED;
|
|
}
|
|
|
|
static void
|
|
ad_free(struct ad_request *request)
|
|
{
|
|
request->softc->tags[request->tag] = NULL;
|
|
free(request, M_AD);
|
|
}
|
|
|
|
static void
|
|
ad_invalidatequeue(struct ad_softc *adp, struct ad_request *request)
|
|
{
|
|
/* if tags in use invalidate all other outstanding transfers */
|
|
if (adp->flags & AD_F_TAG_ENABLED) {
|
|
struct ad_request *tmpreq;
|
|
int tag;
|
|
|
|
ata_prtdev(adp->device, "invalidating queued requests\n");
|
|
for (tag = 0; tag <= adp->num_tags; tag++) {
|
|
tmpreq = adp->tags[tag];
|
|
adp->tags[tag] = NULL;
|
|
if (tmpreq == request || tmpreq == NULL)
|
|
continue;
|
|
untimeout((timeout_t *)ad_timeout, tmpreq, tmpreq->timeout_handle);
|
|
TAILQ_INSERT_HEAD(&adp->device->channel->ata_queue, tmpreq, chain);
|
|
}
|
|
adp->outstanding = 0;
|
|
if (ata_command(adp->device, ATA_C_NOP,
|
|
0, 0, ATA_C_F_FLUSHQUEUE, ATA_WAIT_READY))
|
|
ata_prtdev(adp->device, "flush queue failed\n");
|
|
}
|
|
}
|
|
|
|
static int
|
|
ad_tagsupported(struct ad_softc *adp)
|
|
{
|
|
switch (adp->device->channel->chiptype) {
|
|
case 0x0d30105a: /* Promises before TX2 doesn't work with tagged queuing */
|
|
case 0x0d38105a:
|
|
case 0x4d30105a:
|
|
case 0x4d33105a:
|
|
case 0x4d38105a:
|
|
return 0;
|
|
}
|
|
|
|
/* check that drive does DMA, has tags enabled, and is one we know works */
|
|
if (adp->device->mode >= ATA_DMA && adp->device->param->support.queued &&
|
|
adp->device->param->enabled.queued) {
|
|
|
|
/* IBM DTTA series needs transfers <= 64K for tags to work properly */
|
|
if (!strncmp(adp->device->param->model, "IBM-DTTA", 8)) {
|
|
adp->max_iosize = 128 * DEV_BSIZE;
|
|
return 1;
|
|
}
|
|
|
|
/* IBM DJNA series has broken tags, corrupts data */
|
|
if (!strncmp(adp->device->param->model, "IBM-DJNA", 8))
|
|
return 0;
|
|
|
|
/* IBM DPTA & IBM DTLA series supports tags */
|
|
if (!strncmp(adp->device->param->model, "IBM-DPTA", 8) ||
|
|
!strncmp(adp->device->param->model, "IBM-DTLA", 8))
|
|
return 1;
|
|
|
|
/* IBM IC series ATA drives supports tags */
|
|
if (!strncmp(adp->device->param->model, "IC", 2) &&
|
|
(!strncmp(adp->device->param->model + 8, "AT", 2) ||
|
|
!strncmp(adp->device->param->model + 8, "AV", 2)))
|
|
return 1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
ad_timeout(struct ad_request *request)
|
|
{
|
|
struct ad_softc *adp = request->softc;
|
|
|
|
adp->device->channel->running = NULL;
|
|
request->timeout_handle.callout = NULL;
|
|
ata_prtdev(adp->device, "%s command timeout tag=%d serv=%d - resetting\n",
|
|
(request->flags & ADR_F_READ) ? "READ" : "WRITE",
|
|
request->tag, request->serv);
|
|
|
|
if (request->flags & ADR_F_DMA_USED) {
|
|
ata_dmadone(adp->device);
|
|
ad_invalidatequeue(adp, request);
|
|
if (request->retries == AD_MAX_RETRIES) {
|
|
ata_dmainit(adp->device, ata_pmode(adp->device->param), -1, -1);
|
|
ata_prtdev(adp->device, "trying fallback to PIO mode\n");
|
|
request->retries = 0;
|
|
}
|
|
}
|
|
|
|
/* if retries still permit, reinject this request */
|
|
if (request->retries++ < AD_MAX_RETRIES) {
|
|
TAILQ_INSERT_HEAD(&adp->device->channel->ata_queue, request, chain);
|
|
}
|
|
else {
|
|
/* retries all used up, return error */
|
|
request->bp->bio_error = EIO;
|
|
request->bp->bio_flags |= BIO_ERROR;
|
|
biofinish(request->bp, &adp->stats, 0);
|
|
ad_free(request);
|
|
}
|
|
ata_reinit(adp->device->channel);
|
|
}
|
|
|
|
void
|
|
ad_reinit(struct ata_device *atadev)
|
|
{
|
|
struct ad_softc *adp = atadev->driver;
|
|
|
|
/* reinit disk parameters */
|
|
ad_invalidatequeue(atadev->driver, NULL);
|
|
ata_command(atadev, ATA_C_SET_MULTI, 0,
|
|
adp->transfersize / DEV_BSIZE, 0, ATA_WAIT_READY);
|
|
if (adp->device->mode >= ATA_DMA)
|
|
ata_dmainit(atadev, ata_pmode(adp->device->param),
|
|
ata_wmode(adp->device->param),
|
|
ata_umode(adp->device->param));
|
|
else
|
|
ata_dmainit(atadev, ata_pmode(adp->device->param), -1, -1);
|
|
}
|
|
|
|
void
|
|
ad_print(struct ad_softc *adp)
|
|
{
|
|
if (bootverbose) {
|
|
ata_prtdev(adp->device, "<%.40s/%.8s> ATA-%d disk at ata%d-%s\n",
|
|
adp->device->param->model, adp->device->param->revision,
|
|
ad_version(adp->device->param->version_major),
|
|
device_get_unit(adp->device->channel->dev),
|
|
(adp->device->unit == ATA_MASTER) ? "master" : "slave");
|
|
|
|
ata_prtdev(adp->device,
|
|
"%lluMB (%llu sectors), %llu C, %u H, %u S, %u B\n",
|
|
(unsigned long long)(adp->total_secs /
|
|
((1024L*1024L)/DEV_BSIZE)),
|
|
(unsigned long long)adp->total_secs,
|
|
(unsigned long long)(adp->total_secs /
|
|
(adp->heads * adp->sectors)),
|
|
adp->heads, adp->sectors, DEV_BSIZE);
|
|
|
|
ata_prtdev(adp->device, "%d secs/int, %d depth queue, %s%s\n",
|
|
adp->transfersize / DEV_BSIZE, adp->num_tags + 1,
|
|
(adp->flags & AD_F_TAG_ENABLED) ? "tagged " : "",
|
|
ata_mode2str(adp->device->mode));
|
|
|
|
ata_prtdev(adp->device, "piomode=%d dmamode=%d udmamode=%d cblid=%d\n",
|
|
ata_pmode(adp->device->param), ata_wmode(adp->device->param),
|
|
ata_umode(adp->device->param),
|
|
adp->device->param->hwres_cblid);
|
|
|
|
}
|
|
else
|
|
ata_prtdev(adp->device,"%lluMB <%.40s> [%lld/%d/%d] at ata%d-%s %s%s\n",
|
|
(unsigned long long)(adp->total_secs /
|
|
((1024L * 1024L) / DEV_BSIZE)),
|
|
adp->device->param->model,
|
|
(unsigned long long)(adp->total_secs /
|
|
(adp->heads * adp->sectors)),
|
|
adp->heads, adp->sectors,
|
|
device_get_unit(adp->device->channel->dev),
|
|
(adp->device->unit == ATA_MASTER) ? "master" : "slave",
|
|
(adp->flags & AD_F_TAG_ENABLED) ? "tagged " : "",
|
|
ata_mode2str(adp->device->mode));
|
|
}
|
|
|
|
static int
|
|
ad_version(u_int16_t version)
|
|
{
|
|
int bit;
|
|
|
|
if (version == 0xffff)
|
|
return 0;
|
|
for (bit = 15; bit >= 0; bit--)
|
|
if (version & (1<<bit))
|
|
return bit;
|
|
return 0;
|
|
}
|