1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-17 10:26:15 +00:00
freebsd/sys/i386/include/pci_cfgreg.h
John Baldwin 7a64d8d74c - Create a pir0 psuedo device as a child of legacy0 if we attach a legacy
host-PCI bridge device and find a valid $PIR.
- Make pci_pir_parse() private to pci_pir.c and have pir0's attach routine
  call it instead of having legacy_pcib_attach() call it.
- Implement suspend/resume support for the $PIR by giving pir0 a resume
  method that calls the BIOS to reroute each link that was already routed
  before the machine was suspended.
- Dump the state of the routed flag in the links display code.
- If a link's IRQ is set by a tunable, then force that link to be re-routed
  the first time it is used.
- Move the 'Found $PIR' message under bootverbose as the pir0 description
  line lists the number of entries already.  The pir0 line also only shows
  up if we are actually using the $PIR which is a bonus.
- Use BUS_CONFIG_INTR() to ensure that any IRQs used by a PCI link are
  set to level/low trigger/polarity.
2004-05-04 21:17:52 +00:00

56 lines
2.2 KiB
C

/*
* Copyright (c) 1997, Stefan Esser <se@freebsd.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice unmodified, this list of conditions, and the following
* disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* $FreeBSD$
*
*/
#define CONF1_ADDR_PORT 0x0cf8
#define CONF1_DATA_PORT 0x0cfc
#define CONF1_ENABLE 0x80000000ul
#define CONF1_ENABLE_CHK 0x80000000ul
#define CONF1_ENABLE_MSK 0x7f000000ul
#define CONF1_ENABLE_CHK1 0xff000001ul
#define CONF1_ENABLE_MSK1 0x80000001ul
#define CONF1_ENABLE_RES1 0x80000000ul
#define CONF2_ENABLE_PORT 0x0cf8
#ifdef PC98
#define CONF2_FORWARD_PORT 0x0cf9
#else
#define CONF2_FORWARD_PORT 0x0cfa
#endif
#define CONF2_ENABLE_CHK 0x0e
#define CONF2_ENABLE_RES 0x0e
int pci_cfgregopen(void);
u_int32_t pci_cfgregread(int bus, int slot, int func, int reg, int bytes);
void pci_cfgregwrite(int bus, int slot, int func, int reg, u_int32_t data, int bytes);
void pci_pir_open(void);
int pci_pir_probe(int bus, int require_parse);
int pci_pir_route_interrupt(int bus, int device, int func, int pin);