freebsd/man/man1m/dtrace.1m

'\" te
.\" Copyright (c) 2009, Sun Microsystems, Inc. All Rights Reserved.
.\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License"). You may not use this file except in compliance with the License. You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.
.\" See the License for the specific language governing permissions and limitations under the License. When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE. If applicable, add the following below this CDDL HEADER, with the
.\" fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
.TH DTRACE 1M "Aug 4, 2009"
.SH NAME
dtrace \- DTrace dynamic tracing compiler and tracing utility
.SH SYNOPSIS
.LP
.nf
\fBdtrace\fR [\fB-32\fR | \fB-64\fR] [\fB-aACeFGHhlqSvVwZ\fR] [\fB-b\fR \fIbufsz\fR] [\fB-c\fR \fIcmd\fR]
     [\fB-D\fR \fIname\fR [\fI=value\fR]] [\fB-I\fR \fIpath\fR] [\fB-L\fR \fIpath\fR] [\fB-o\fR \fIoutput\fR]
     [\fB-s\fR \fIscript\fR] [\fB-U\fR \fIname\fR] [\fB-x\fR \fIarg\fR [\fI=val\fR]]
     [\fB-X\fR a | c | s | t] [\fB-p\fR \fIpid\fR]
     [\fB-P\fR \fIprovider\fR [[\fIpredicate\fR] \fIaction\fR]]
     [\fB-m\fR [\fIprovider:\fR] \fImodule\fR [[\fIpredicate\fR] \fIaction\fR]]
     [\fB-f\fR [[\fIprovider:\fR] \fImodule:\fR] \fIfunction\fR [[\fIpredicate\fR] \fIaction\fR]]
     [\fB-n\fR [[[\fIprovider:\fR] \fImodule:\fR] \fIfunction:\fR] \fIname\fR [[\fIpredicate\fR] \fIaction\fR]]
     [\fB-i\fR \fIprobe-id\fR [[\fIpredicate\fR] \fIaction\fR]]
.fi

.SH DESCRIPTION
.sp
.LP
DTrace is a comprehensive dynamic tracing framework for the Solaris Operating
System. DTrace provides a powerful infrastructure that permits administrators,
developers, and service personnel to concisely answer arbitrary questions about
the behavior of the operating system and user programs.
.sp
.LP
The \fISolaris Dynamic Tracing Guide\fR describes how to use DTrace to observe,
debug, and tune system behavior. Refer to this book for a detailed description
of DTrace features, including the bundled DTrace observability tools,
instrumentation providers, and the D programming language.
.sp
.LP
The \fBdtrace\fR command provides a generic interface to the essential services
provided by the DTrace facility, including:
.RS +4
.TP
.ie t \(bu
.el o
Options that list the set of probes and providers currently published by DTrace
.RE
.RS +4
.TP
.ie t \(bu
.el o
Options that enable probes directly using any of the probe description
specifiers (provider, module, function, name)
.RE
.RS +4
.TP
.ie t \(bu
.el o
Options that run the D compiler and compile one or more D program files or
programs written directly on the command line
.RE
.RS +4
.TP
.ie t \(bu
.el o
Options that generate anonymous tracing programs
.RE
.RS +4
.TP
.ie t \(bu
.el o
Options that generate program stability reports
.RE
.RS +4
.TP
.ie t \(bu
.el o
Options that modify DTrace tracing and buffering behavior and enable additional
D compiler features
.RE
.sp
.LP
You can use \fBdtrace\fR to create D scripts by using it in a \fB#!\fR
declaration to create an interpreter file. You can also use \fBdtrace\fR to
attempt to compile D programs and determine their properties without actually
enabling tracing using the \fB-e\fR option. See \fBOPTIONS\fR. See the
\fISolaris Dynamic Tracing Guide\fR for detailed examples of how to use the
\fBdtrace\fR utility to perform these tasks.
.SH OPTIONS
.sp
.LP
The arguments accepted by the \fB-P\fR, \fB-m\fR, \fB-f\fR, \fB-n\fR, and
\fB-i\fR options can include an optional D language \fIpredicate\fR enclosed in
slashes \fB//\fR and optional D language \fIaction\fR statement list enclosed
in braces \fB{}\fR. D program code specified on the command line must be
appropriately quoted to avoid interpretation of meta-characters by the shell.
.sp
.LP
The following options are supported:
.sp
.ne 2
.na
\fB\fB-32\fR | \fB-64\fR\fR
.ad
.sp .6
.RS 4n
The D compiler produces programs using the native data model of the operating
system kernel. You can use the \fBisainfo\fR \fB-b\fR command to determine the
current operating system data model. If the \fB-32\fR option is specified,
\fBdtrace\fR forces the D compiler to compile a D program using the 32-bit data
model. If the \fB-64\fR option is specified, \fBdtrace\fR forces the D compiler
to compile a D program using the 64-bit data model. These options are typically
not required as \fBdtrace\fR selects the native data model as the default. The
data model affects the sizes of integer types and other language properties. D
programs compiled for either data model can be executed on both 32-bit and
64-bit kernels. The \fB-32\fR and \fB-64\fR options also determine the ELF file
format (ELF32 or ELF64) produced by the \fB-G\fR option.
.RE

.sp
.ne 2
.na
\fB\fB-a\fR\fR
.ad
.sp .6
.RS 4n
Claim anonymous tracing state and display the traced data. You can combine the
\fB-a\fR option with the \fB-e\fR option to force \fBdtrace\fR to exit
immediately after consuming the anonymous tracing state rather than continuing
to wait for new data. See the \fISolaris Dynamic Tracing Guide\fR for more
information about anonymous tracing.
.RE

.sp
.ne 2
.na
\fB\fB-A\fR\fR
.ad
.sp .6
.RS 4n
Generate \fBdriver.conf\fR(4) directives for anonymous tracing. This option
constructs a set of \fBdtrace\fR(7D) configuration file directives to enable
the specified probes for anonymous tracing and then exits. By default,
\fBdtrace\fR attempts to store the directives to the file
\fB/kernel/drv/dtrace.conf\fR. You can modify this behavior if you use the
\fB-o\fR option to specify an alternate output file.
.RE

.sp
.ne 2
.na
\fB\fB-b\fR \fIbufsz\fR\fR
.ad
.sp .6
.RS 4n
Set principal trace buffer size (\fIbufsz\fR). The trace buffer size can
include any of the size suffixes \fBk\fR, \fBm\fR, \fBg\fR, or \fBt\fR. If the
buffer space cannot be allocated, \fBdtrace\fR attempts to reduce the buffer
size or exit depending on the setting of the \fBbufresize\fR property.
.RE

.sp
.ne 2
.na
\fB\fB-c\fR \fIcmd\fR\fR
.ad
.sp .6
.RS 4n
Run the specified command \fIcmd\fR and exit upon its completion. If more than
one \fB-c\fR option is present on the command line, \fBdtrace\fR exits when all
commands have exited, reporting the exit status for each child process as it
terminates. The process-ID of the first command is made available to any D
programs specified on the command line or using the \fB-s\fR option through the
\fB$target\fR macro variable. Refer to the \fISolaris Dynamic Tracing Guide\fR
for more information on macro variables.
.RE

.sp
.ne 2
.na
\fB\fB-C\fR\fR
.ad
.sp .6
.RS 4n
Run the C preprocessor \fBcpp\fR(1) over D programs before compiling them. You
can pass options to the C preprocessor using the \fB-D\fR, \fB-U\fR, \fB-I\fR,
and \fB-H\fR options. You can select the degree of C standard conformance if
you use the \fB-X\fR option. For a description of the set of tokens defined by
the D compiler when invoking the C preprocessor, see \fB-X\fR.
.RE

.sp
.ne 2
.na
\fB\fB-D\fR \fIname\fR \fB[=\fR\fIvalue\fR\fB]\fR\fR
.ad
.sp .6
.RS 4n
Define \fIname\fR when invoking \fBcpp\fR(1) (enabled using the \fB-C\fR
option). If you specify the equals sign (\fB=\fR) and additional \fIvalue\fR,
the name is assigned the corresponding value. This option passes the \fB-D\fR
option to each \fBcpp\fR invocation.
.RE

.sp
.ne 2
.na
\fB\fB-e\fR\fR
.ad
.sp .6
.RS 4n
Exit after compiling any requests and consuming anonymous tracing state
(\fB-a\fR option) but prior to enabling any probes. You can combine this option
with the \fB-a\fR option to print anonymous tracing data and exit. You can also
combine this option with D compiler options. This combination verifies that the
programs compile without actually executing them and enabling the corresponding
instrumentation.
.RE

.sp
.ne 2
.na
\fB\fB-f\fR\fB[[\fR\fIprovider\fR\fB:]\fR\fImodule\fR\fB:]\fR\fIfunction\fR\fB[
[\fR\fIpredicate\fR\fB]\fR\fIaction\fR\fB]]\fR\fR
.ad
.sp .6
.RS 4n
Specify function name to trace or list (\fB-l\fR option). The corresponding
argument can include any of the probe description forms
\fIprovider:module:function\fR, \fImodule:function\fR, or \fIfunction\fR.
Unspecified probe description fields are left blank and match any probes
regardless of the values in those fields. If no qualifiers other than
\fIfunction\fR are specified in the description, all probes with the
corresponding \fIfunction\fR are matched. The \fB-f\fR argument can be suffixed
with an optional D probe clause. You can specify more than one \fB-f\fR option
on the command line at a time.
.RE

.sp
.ne 2
.na
\fB\fB-F\fR\fR
.ad
.sp .6
.RS 4n
Coalesce trace output by identifying function entry and return. Function entry
probe reports are indented and their output is prefixed with \fB->\fR. Function
return probe reports are unindented and their output is prefixed with
\fB<-\fR\&. System call entry probe reports are indented and their output is
prefixed with \fB=>\fR. System call return probe reports are unindented and
their output is prefixed with \fB<=\fR\&.
.RE

.sp
.ne 2
.na
\fB\fB-G\fR\fR
.ad
.sp .6
.RS 4n
Generate an ELF file containing an embedded DTrace program. The DTrace probes
specified in the program are saved inside of a relocatable ELF object which can
be linked into another program. If the \fB-o\fR option is present, the ELF file
is saved using the pathname specified as the argument for this operand. If the
\fB-o\fR option is not present and the DTrace program is contained with a file
whose name is \fB\fIfilename\fR.d\fR, then the ELF file is saved using the name
\fB\fIfilename\fR.o\fR. Otherwise the ELF file is saved using the name
\fBd.out\fR.
.RE

.sp
.ne 2
.na
\fB\fB-H\fR\fR
.ad
.sp .6
.RS 4n
Print the pathnames of included files when invoking \fBcpp\fR(1) (enabled using
the \fB-C\fR option). This option passes the \fB-H\fR option to each \fBcpp\fR
invocation, causing it to display the list of pathnames, one for each line, to
\fBstderr\fR.
.RE

.sp
.ne 2
.na
\fB\fB-h\fR\fR
.ad
.sp .6
.RS 4n
Generate a header file containing macros that correspond to probes in the
specified provider definitions. This option should be used to generate a header
file that is included by other source files for later use with the \fB-G\fR
option. If the \fB-o\fR option is present, the header file is saved using the
pathname specified as the argument for that option. If the \fB-o\fR option is
not present and the DTrace program is contained with a file whose name is
\fIfilename\fR\fB\&.d\fR, then the header file is saved using the name
\fIfilename\fR\fB\&.h\fR.
.RE

.sp
.ne 2
.na
\fB\fB-i\fR \fIprobe-id\fR\fB[[\fR\fIpredicate\fR] \fIaction\fR\fB]\fR\fR
.ad
.sp .6
.RS 4n
Specify probe identifier (\fIprobe-id\fR) to trace or list (\fB-l\fR option).
You can specify probe IDs using decimal integers as shown by \fBdtrace\fR
\fB-l\fR. The \fB-i\fR argument can be suffixed with an optional D probe
clause. You can specify more than one \fB-i\fR option at a time.
.RE

.sp
.ne 2
.na
\fB\fB-I\fR \fIpath\fR\fR
.ad
.sp .6
.RS 4n
Add the specified directory \fIpath\fR to the search path for \fB#include\fR
files when invoking \fBcpp\fR(1) (enabled using the \fB-C\fR option). This
option passes the \fB-I\fR option to each \fBcpp\fR invocation. The specified
\fIpath\fR is inserted into the search path ahead of the default directory
list.
.RE

.sp
.ne 2
.na
\fB\fB-L\fR \fIpath\fR\fR
.ad
.sp .6
.RS 4n
Add the specified directory \fIpath\fR to the search path for DTrace libraries.
DTrace libraries are used to contain common definitions that can be used when
writing D programs. The specified \fIpath\fR is added after the default library
search path.
.RE

.sp
.ne 2
.na
\fB\fB-l\fR\fR
.ad
.sp .6
.RS 4n
List probes instead of enabling them. If the \fB-l\fR option is specified,
\fBdtrace\fR produces a report of the probes matching the descriptions given
using the \fB-P\fR, \fB-m\fR, \fB-f\fR, \fB-n\fR, \fB-i\fR, and \fB-s\fR
options. If none of these options are specified, this option lists all probes.
.RE

.sp
.ne 2
.na
\fB\fB-m\fR [[\fIprovider:\fR] \fImodule:\fR [[\fIpredicate\fR]
\fIaction\fR]]\fR
.ad
.sp .6
.RS 4n
Specify module name to trace or list (\fB-l\fR option). The corresponding
argument can include any of the probe description forms \fIprovider:module\fR
or \fImodule\fR. Unspecified probe description fields are left blank and match
any probes regardless of the values in those fields. If no qualifiers other
than \fImodule\fR are specified in the description, all probes with a
corresponding \fImodule\fR are matched. The \fB-m\fR argument can be suffixed
with an optional D probe clause. More than one \fB-m\fR option can be specified
on the command line at a time.
.RE

.sp
.ne 2
.na
\fB\fB-n\fR [[[\fIprovider:\fR] \fImodule:\fR] \fIfunction:\fR] \fIname\fR
[[\fIpredicate\fR] \fIaction\fR]\fR
.ad
.sp .6
.RS 4n
Specify probe name to trace or list (\fB-l\fR option). The corresponding
argument can include any of the probe description forms
\fIprovider:module:function:name\fR, \fImodule:function:name\fR,
\fIfunction:name\fR, or \fIname\fR. Unspecified probe description fields are
left blank and match any probes regardless of the values in those fields. If no
qualifiers other than \fIname\fR are specified in the description, all probes
with a corresponding \fIname\fR are matched. The \fB-n\fR argument can be
suffixed with an optional D probe clause. More than one \fB-n\fR option can be
specified on the command line at a time.
.RE

.sp
.ne 2
.na
\fB\fB-o\fR \fIoutput\fR\fR
.ad
.sp .6
.RS 4n
Specify the \fIoutput\fR file for the \fB-A\fR , \fB-G\fR,  \fB-h\fR, and
\fB-l\fR options, or for the traced data itself. If the \fB-A\fR option is
present and \fB-o\fR is not present, the default output file is
\fB/kernel/drv/dtrace.conf\fR. If the \fB-G\fR option is present and the
\fB-s\fR option's argument is of the form \fB\fIfilename\fR.d\fR and \fB-o\fR
is not present, the default output file is \fB\fIfilename\fR.o\fR. Otherwise
the default output file is \fBd.out\fR.
.RE

.sp
.ne 2
.na
\fB\fB-p\fR \fIpid\fR\fR
.ad
.sp .6
.RS 4n
Grab the specified process-ID \fIpid\fR, cache its symbol tables, and exit upon
its completion. If more than one \fB-p\fR option is present on the command
line, \fBdtrace\fR exits when all commands have exited, reporting the exit
status for each process as it terminates. The first process-ID is made
available to any D programs specified on the command line or using the \fB-s\fR
option through the \fB$target\fR macro variable. Refer to the \fISolaris
Dynamic Tracing Guide\fR for more information on macro variables.
.RE

.sp
.ne 2
.na
\fB\fB-P\fR \fIprovider\fR \fB[[\fR\fIpredicate\fR\fB]\fR \fIaction\fR]\fR
.ad
.sp .6
.RS 4n
Specify provider name to trace or list (\fB-l\fR option). The remaining probe
description fields module, function, and name are left blank and match any
probes regardless of the values in those fields. The \fB-P\fR argument can be
suffixed with an optional D probe clause. You can specify more than one
\fB-P\fR option on the command line at a time.
.RE

.sp
.ne 2
.na
\fB\fB-q\fR\fR
.ad
.sp .6
.RS 4n
Set quiet mode. \fBdtrace\fR suppresses messages such as the number of probes
matched by the specified options and D programs and does not print column
headers, the CPU ID, the probe ID, or insert newlines into the output. Only
data traced and formatted by D program statements such as \fBtrace()\fR and
\fBprintf()\fR is displayed to \fBstdout\fR.
.RE

.sp
.ne 2
.na
\fB\fB-s\fR\fR
.ad
.sp .6
.RS 4n
Compile the specified D program source file. If the \fB-e\fR option is present,
the program is compiled but instrumentation is not enabled. If the \fB-l\fR
option is present, the program is compiled and the set of probes matched by it
is listed, but instrumentation is not enabled. If none of \fB-e\fR, \fB-l\fR,
\fB-G\fR, or \fB-A\fR are present, the instrumentation specified by the D
program is enabled and tracing begins.
.RE

.sp
.ne 2
.na
\fB\fB-S\fR\fR
.ad
.sp .6
.RS 4n
Show D compiler intermediate code. The D compiler produces a report of the
intermediate code generated for each D program to \fBstderr\fR.
.RE

.sp
.ne 2
.na
\fB\fB-U\fR \fIname\fR\fR
.ad
.sp .6
.RS 4n
Undefine the specified \fIname\fR when invoking \fBcpp\fR(1) (enabled using the
\fB-C\fR option). This option passes the \fB-U\fR option to each \fBcpp\fR
invocation.
.RE

.sp
.ne 2
.na
\fB\fB-v\fR\fR
.ad
.sp .6
.RS 4n
Set verbose mode. If the \fB-v\fR option is specified, \fBdtrace\fR produces a
program stability report showing the minimum interface stability and dependency
level for the specified D programs. DTrace stability levels are explained in
further detail in the \fISolaris Dynamic Tracing Guide\fR.
.RE

.sp
.ne 2
.na
\fB\fB-V\fR\fR
.ad
.sp .6
.RS 4n
Report the highest D programming interface version supported by \fBdtrace\fR.
The version information is printed to \fBstdout\fR and the \fBdtrace\fR command
exits. Refer to the \fISolaris Dynamic Tracing Guide\fR for more information
about DTrace versioning features.
.RE

.sp
.ne 2
.na
\fB\fB-w\fR\fR
.ad
.sp .6
.RS 4n
Permit destructive actions in D programs specified using the \fB-s\fR,
\fB-P\fR, \fB-m\fR, \fB-f\fR, \fB-n\fR, or \fB-i\fR options. If the \fB-w\fR
option is not specified, \fBdtrace\fR does not permit the compilation or
enabling of a D program that contains destructive actions.
.RE

.sp
.ne 2
.na
\fB\fB-x\fR \fIarg\fR [\fI=val\fR]\fR
.ad
.sp .6
.RS 4n
Enable or modify a DTrace runtime option or D compiler option. The list of
options is found in the \fISolaris Dynamic Tracing Guide\fR. Boolean options
are enabled by specifying their name. Options with values are set by separating
the option name and value with an equals sign (\fB=\fR).
.RE

.sp
.ne 2
.na
\fB\fB-X\fR \fBa | c | s | t\fR\fR
.ad
.sp .6
.RS 4n
Specify the degree of conformance to the ISO C standard that should be selected
when invoking \fBcpp\fR(1) (enabled using the \fB-C\fR option). The \fB-X\fR
option argument affects the value and presence of the \fB__STDC__\fR macro
depending upon the value of the argument letter.
.sp
The \fB-X\fR option supports the following arguments:
.sp
.ne 2
.na
\fB\fBa\fR\fR
.ad
.RS 5n
Default. ISO C plus K&R compatibility extensions, with semantic changes
required by ISO C. This is the default mode if \fB-X\fR is not specified. The
predefined macro \fB__STDC__\fR has a value of 0 when \fBcpp\fR is invoked in
conjunction with the \fB-Xa\fR option.
.RE

.sp
.ne 2
.na
\fB\fBc\fR\fR
.ad
.RS 5n
Conformance. Strictly conformant ISO C, without K&R C compatibility extensions.
The predefined macro \fB__STDC__\fR has a value of 1 when \fBcpp\fR is invoked
in conjunction with the \fB-Xc\fR option.
.RE

.sp
.ne 2
.na
\fB\fBs\fR\fR
.ad
.RS 5n
K&R C only. The macro \fB__STDC__\fR is not defined when \fBcpp\fR is invoked
in conjunction with the \fB-Xs\fR option.
.RE

.sp
.ne 2
.na
\fB\fBt\fR\fR
.ad
.RS 5n
Transition. ISO C plus K&R C compatibility extensions, without semantic changes
required by ISO C. The predefined macro \fB__STDC__\fR has a value of 0 when
\fBcpp\fR is invoked in conjunction with the \fB-Xt\fR option.
.RE

As the \fB-X\fR option only affects how the D compiler invokes the C
preprocessor, the \fB-Xa\fR and \fB-Xt\fR options are equivalent from the
perspective of D and both are provided only to ease re-use of settings from a C
build environment.
.sp
Regardless of the \fB-X\fR mode, the following additional C preprocessor
definitions are always specified and valid in all modes:
.RS +4
.TP
.ie t \(bu
.el o
\fB__sun\fR
.RE
.RS +4
.TP
.ie t \(bu
.el o
\fB__unix\fR
.RE
.RS +4
.TP
.ie t \(bu
.el o
\fB__SVR4\fR
.RE
.RS +4
.TP
.ie t \(bu
.el o
\fB__sparc\fR (on SPARC systems only)
.RE
.RS +4
.TP
.ie t \(bu
.el o
\fB__sparcv9\fR (on SPARC systems only when 64-bit programs are compiled)
.RE
.RS +4
.TP
.ie t \(bu
.el o
\fB__i386\fR (on x86 systems only when 32-bit programs are compiled)
.RE
.RS +4
.TP
.ie t \(bu
.el o
\fB__amd64\fR (on x86 systems only when 64-bit programs are compiled)
.RE
.RS +4
.TP
.ie t \(bu
.el o
\fB__\fI`uname -s`\fR_\fI`uname -r`\fR\fR (for example, \fB__SunOS_5_10\fR)
.RE
.RS +4
.TP
.ie t \(bu
.el o
\fB__SUNW_D=1\fR
.RE
.RS +4
.TP
.ie t \(bu
.el o
\fB__SUNW_D_VERSION=0x\fIMMmmmuuu\fR\fR
.sp
Where \fIMM\fR is the major release value in hexadecimal, \fImmm\fR is the
minor release value in hexadecimal, and \fIuuu\fR is the micro release value in
hexadecimal. Refer to the \fISolaris Dynamic Tracing Guide\fR for more
information about DTrace versioning.
.RE
.RE

.sp
.ne 2
.na
\fB\fB-Z\fR\fR
.ad
.sp .6
.RS 4n
Permit probe descriptions that match zero probes. If the \fB-Z\fR option is not
specified, \fBdtrace\fR reports an error and exits if any probe descriptions
specified in D program files (\fB-s\fR option) or on the command line
(\fB-P\fR, \fB-m\fR, \fB-f\fR, \fB-n\fR, or \fB-i\fR options) contain
descriptions that do not match any known probes.
.RE

.SH OPERANDS
.sp
.LP
You can specify zero or more additional arguments on the \fBdtrace\fR command
line to define a set of macro variables (\fB$1\fR, \fB$2\fR, and so forth). The
additional arguments can be used in D programs specified using the \fB-s\fR
option or on the command line. The use of macro variables is described further
in the \fISolaris Dynamic Tracing Guide\fR.
.SH EXIT STATUS
.sp
.LP
The following exit values are returned:
.sp
.ne 2
.na
\fB0\fR
.ad
.RS 5n
Successful completion.
.sp
For D program requests, an exit status of \fB0\fR indicates that programs were
successfully compiled, probes were successfully enabled, or anonymous state was
successfully retrieved. \fBdtrace\fR returns \fB0\fR even if the specified
tracing requests encountered errors or drops.
.RE

.sp
.ne 2
.na
\fB\fB1\fR\fR
.ad
.RS 5n
An error occurred.
.sp
For D program requests, an exit status of \fB1\fR indicates that program
compilation failed or that the specified request could not be satisfied.
.RE

.sp
.ne 2
.na
\fB\fB2\fR\fR
.ad
.RS 5n
Invalid command line options or arguments were specified.
.RE

.SH ATTRIBUTES
.sp
.LP
See \fBattributes\fR(5) for descriptions of the following attributes:
.sp

.sp
.TS
box;
c | c
l | l .
ATTRIBUTE TYPE	ATTRIBUTE VALUE
_
Interface Stability	See below.
.TE

.sp
.LP
The command-line syntax is Committed. The human-readable output is Uncommitted.
.SH SEE ALSO
.sp
.LP
\fBcpp\fR(1), \fBisainfo\fR(1), \fBssh\fR(1), \fBlibdtrace\fR(3LIB),
\fBdriver.conf\fR(4), \fBattributes\fR(5), \fBdtrace\fR(7D)
.sp
.LP
\fISolaris Dynamic Tracing Guide\fR
.SH USAGE
.sp
.LP
When using the \fB-p\fR flag, \fBdtrace\fR stops the target processes while it
is inspecting them and reporting results. A process can do nothing while it is
stopped. This means that, if , for example, the X server is inspected by
\fBdtrace\fR running in a window under the X server's control, the whole window
system can become deadlocked, because the \fBproc\fR tool would be attempting
to display its results to a window that cannot be refreshed. In such a case,
logging in from another system using \fBssh\fR(1) and killing the offending
\fBproc\fR tool clears the deadlock.