mirror of
https://git.FreeBSD.org/src.git
synced 2024-12-27 11:55:06 +00:00
59aa14a91d
net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
331 lines
13 KiB
Plaintext
331 lines
13 KiB
Plaintext
#
|
|
# GENERIC -- Generic kernel configuration file for FreeBSD/amd64
|
|
#
|
|
# For more information on this file, please read the config(5) manual page,
|
|
# and/or the handbook section on Kernel Configuration Files:
|
|
#
|
|
# http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
|
|
#
|
|
# The handbook is also available locally in /usr/share/doc/handbook
|
|
# if you've installed the doc distribution, otherwise always see the
|
|
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
|
|
# latest information.
|
|
#
|
|
# An exhaustive list of options and more detailed explanations of the
|
|
# device lines is also present in the ../../conf/NOTES and NOTES files.
|
|
# If you are in doubt as to the purpose or necessity of a line, check first
|
|
# in NOTES.
|
|
#
|
|
# $FreeBSD$
|
|
|
|
cpu HAMMER
|
|
ident GENERIC
|
|
|
|
# To statically compile in device wiring instead of /boot/device.hints
|
|
#hints "GENERIC.hints" # Default places to look for devices.
|
|
|
|
# Use the following to compile in values accessible to the kernel
|
|
# through getenv() (or kenv(1) in userland). The format of the file
|
|
# is 'variable=value', see kenv(1)
|
|
#
|
|
# env "GENERIC.env"
|
|
|
|
makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols
|
|
|
|
options SCHED_ULE # ULE scheduler
|
|
options PREEMPTION # Enable kernel thread preemption
|
|
options INET # InterNETworking
|
|
options INET6 # IPv6 communications protocols
|
|
options SCTP # Stream Control Transmission Protocol
|
|
options FFS # Berkeley Fast Filesystem
|
|
options SOFTUPDATES # Enable FFS soft updates support
|
|
options UFS_ACL # Support for access control lists
|
|
options UFS_DIRHASH # Improve performance on big directories
|
|
options UFS_GJOURNAL # Enable gjournal-based UFS journaling
|
|
options MD_ROOT # MD is a potential root device
|
|
options NFSCLIENT # Network Filesystem Client
|
|
options NFSSERVER # Network Filesystem Server
|
|
options NFSLOCKD # Network Lock Manager
|
|
options NFS_ROOT # NFS usable as /, requires NFSCLIENT
|
|
options MSDOSFS # MSDOS Filesystem
|
|
options CD9660 # ISO 9660 Filesystem
|
|
options PROCFS # Process filesystem (requires PSEUDOFS)
|
|
options PSEUDOFS # Pseudo-filesystem framework
|
|
options GEOM_PART_GPT # GUID Partition Tables.
|
|
options GEOM_LABEL # Provides labelization
|
|
options COMPAT_43TTY # BSD 4.3 TTY compat (sgtty)
|
|
options COMPAT_IA32 # Compatible with i386 binaries
|
|
options COMPAT_FREEBSD4 # Compatible with FreeBSD4
|
|
options COMPAT_FREEBSD5 # Compatible with FreeBSD5
|
|
options COMPAT_FREEBSD6 # Compatible with FreeBSD6
|
|
options COMPAT_FREEBSD7 # Compatible with FreeBSD7
|
|
options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI
|
|
options KTRACE # ktrace(1) support
|
|
options STACK # stack(9) support
|
|
options SYSVSHM # SYSV-style shared memory
|
|
options SYSVMSG # SYSV-style message queues
|
|
options SYSVSEM # SYSV-style semaphores
|
|
options P1003_1B_SEMAPHORES # POSIX-style semaphores
|
|
options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions
|
|
options PRINTF_BUFR_SIZE=128 # Prevent printf output being interspersed.
|
|
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
|
|
options STOP_NMI # Stop CPUS using NMI instead of IPI
|
|
options HWPMC_HOOKS # Necessary kernel hooks for hwpmc(4)
|
|
options AUDIT # Security event auditing
|
|
options MAC # TrustedBSD MAC Framework
|
|
options FLOWTABLE # per-cpu routing cache
|
|
#options KDTRACE_FRAME # Ensure frames are compiled in
|
|
#options KDTRACE_HOOKS # Kernel DTrace hooks
|
|
|
|
# Debugging for use in -current
|
|
options KDB # Enable kernel debugger support.
|
|
options DDB # Support DDB.
|
|
options GDB # Support remote GDB.
|
|
options INVARIANTS # Enable calls of extra sanity checking
|
|
options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS
|
|
options WITNESS # Enable checks to detect deadlocks and cycles
|
|
options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed
|
|
|
|
# Make an SMP-capable kernel by default
|
|
options SMP # Symmetric MultiProcessor Kernel
|
|
|
|
# CPU frequency control
|
|
device cpufreq
|
|
|
|
# Bus support.
|
|
device acpi
|
|
device pci
|
|
|
|
# Floppy drives
|
|
device fdc
|
|
|
|
# ATA and ATAPI devices
|
|
device ata
|
|
device atadisk # ATA disk drives
|
|
device ataraid # ATA RAID drives
|
|
device atapicd # ATAPI CDROM drives
|
|
device atapifd # ATAPI floppy drives
|
|
device atapist # ATAPI tape drives
|
|
options ATA_STATIC_ID # Static device numbering
|
|
|
|
# SCSI Controllers
|
|
device ahc # AHA2940 and onboard AIC7xxx devices
|
|
options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
|
|
# output. Adds ~128k to driver.
|
|
device ahd # AHA39320/29320 and onboard AIC79xx devices
|
|
options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
|
|
# output. Adds ~215k to driver.
|
|
device amd # AMD 53C974 (Tekram DC-390(T))
|
|
device hptiop # Highpoint RocketRaid 3xxx series
|
|
device isp # Qlogic family
|
|
#device ispfw # Firmware for QLogic HBAs- normally a module
|
|
device mpt # LSI-Logic MPT-Fusion
|
|
#device ncr # NCR/Symbios Logic
|
|
device sym # NCR/Symbios Logic (newer chipsets + those of `ncr')
|
|
device trm # Tekram DC395U/UW/F DC315U adapters
|
|
|
|
device adv # Advansys SCSI adapters
|
|
device adw # Advansys wide SCSI adapters
|
|
device aic # Adaptec 15[012]x SCSI adapters, AIC-6[23]60.
|
|
device bt # Buslogic/Mylex MultiMaster SCSI adapters
|
|
|
|
# SCSI peripherals
|
|
device scbus # SCSI bus (required for SCSI)
|
|
device ch # SCSI media changers
|
|
device da # Direct Access (disks)
|
|
device sa # Sequential Access (tape etc)
|
|
device cd # CD
|
|
device pass # Passthrough device (direct SCSI access)
|
|
device ses # SCSI Environmental Services (and SAF-TE)
|
|
|
|
# RAID controllers interfaced to the SCSI subsystem
|
|
device amr # AMI MegaRAID
|
|
device arcmsr # Areca SATA II RAID
|
|
#XXX it is not 64-bit clean, -scottl
|
|
#device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID
|
|
device ciss # Compaq Smart RAID 5*
|
|
device dpt # DPT Smartcache III, IV - See NOTES for options
|
|
device hptmv # Highpoint RocketRAID 182x
|
|
device hptrr # Highpoint RocketRAID 17xx, 22xx, 23xx, 25xx
|
|
device iir # Intel Integrated RAID
|
|
device ips # IBM (Adaptec) ServeRAID
|
|
device mly # Mylex AcceleRAID/eXtremeRAID
|
|
device twa # 3ware 9000 series PATA/SATA RAID
|
|
|
|
# RAID controllers
|
|
device aac # Adaptec FSA RAID
|
|
device aacp # SCSI passthrough for aac (requires CAM)
|
|
device ida # Compaq Smart RAID
|
|
device mfi # LSI MegaRAID SAS
|
|
device mlx # Mylex DAC960 family
|
|
#XXX pointer/int warnings
|
|
#device pst # Promise Supertrak SX6000
|
|
device twe # 3ware ATA RAID
|
|
|
|
# atkbdc0 controls both the keyboard and the PS/2 mouse
|
|
device atkbdc # AT keyboard controller
|
|
device atkbd # AT keyboard
|
|
device psm # PS/2 mouse
|
|
|
|
device kbdmux # keyboard multiplexer
|
|
|
|
device vga # VGA video card driver
|
|
|
|
device splash # Splash screen and screen saver support
|
|
|
|
# syscons is the default console driver, resembling an SCO console
|
|
device sc
|
|
|
|
device agp # support several AGP chipsets
|
|
|
|
# PCCARD (PCMCIA) support
|
|
# PCMCIA and cardbus bridge support
|
|
device cbb # cardbus (yenta) bridge
|
|
device pccard # PC Card (16-bit) bus
|
|
device cardbus # CardBus (32-bit) bus
|
|
|
|
# Serial (COM) ports
|
|
device uart # Generic UART driver
|
|
|
|
# Parallel port
|
|
device ppc
|
|
device ppbus # Parallel port bus (required)
|
|
device lpt # Printer
|
|
device plip # TCP/IP over parallel
|
|
device ppi # Parallel port interface device
|
|
#device vpo # Requires scbus and da
|
|
|
|
# If you've got a "dumb" serial or parallel PCI card that is
|
|
# supported by the puc(4) glue driver, uncomment the following
|
|
# line to enable it (connects to sio, uart and/or ppc drivers):
|
|
#device puc
|
|
|
|
# PCI Ethernet NICs.
|
|
device de # DEC/Intel DC21x4x (``Tulip'')
|
|
device em # Intel PRO/1000 Gigabit Ethernet Family
|
|
device igb # Intel PRO/1000 PCIE Server Gigabit Family
|
|
device ixgbe # Intel PRO/10GbE PCIE Ethernet Family
|
|
device le # AMD Am7900 LANCE and Am79C9xx PCnet
|
|
device ti # Alteon Networks Tigon I/II gigabit Ethernet
|
|
device txp # 3Com 3cR990 (``Typhoon'')
|
|
device vx # 3Com 3c590, 3c595 (``Vortex'')
|
|
|
|
# PCI Ethernet NICs that use the common MII bus controller code.
|
|
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
|
|
device miibus # MII bus support
|
|
device ae # Attansic/Atheros L2 FastEthernet
|
|
device age # Attansic/Atheros L1 Gigabit Ethernet
|
|
device alc # Atheros AR8131/AR8132 Ethernet
|
|
device ale # Atheros AR8121/AR8113/AR8114 Ethernet
|
|
device bce # Broadcom BCM5706/BCM5708 Gigabit Ethernet
|
|
device bfe # Broadcom BCM440x 10/100 Ethernet
|
|
device bge # Broadcom BCM570xx Gigabit Ethernet
|
|
device dc # DEC/Intel 21143 and various workalikes
|
|
device et # Agere ET1310 10/100/Gigabit Ethernet
|
|
device fxp # Intel EtherExpress PRO/100B (82557, 82558)
|
|
device jme # JMicron JMC250 Gigabit/JMC260 Fast Ethernet
|
|
device lge # Level 1 LXT1001 gigabit Ethernet
|
|
device msk # Marvell/SysKonnect Yukon II Gigabit Ethernet
|
|
device nfe # nVidia nForce MCP on-board Ethernet
|
|
device nge # NatSemi DP83820 gigabit Ethernet
|
|
#device nve # nVidia nForce MCP on-board Ethernet Networking
|
|
device pcn # AMD Am79C97x PCI 10/100 (precedence over 'le')
|
|
device re # RealTek 8139C+/8169/8169S/8110S
|
|
device rl # RealTek 8129/8139
|
|
device sf # Adaptec AIC-6915 (``Starfire'')
|
|
device sis # Silicon Integrated Systems SiS 900/SiS 7016
|
|
device sk # SysKonnect SK-984x & SK-982x gigabit Ethernet
|
|
device ste # Sundance ST201 (D-Link DFE-550TX)
|
|
device stge # Sundance/Tamarack TC9021 gigabit Ethernet
|
|
device tl # Texas Instruments ThunderLAN
|
|
device tx # SMC EtherPower II (83c170 ``EPIC'')
|
|
device vge # VIA VT612x gigabit Ethernet
|
|
device vr # VIA Rhine, Rhine II
|
|
device wb # Winbond W89C840F
|
|
device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
|
|
|
|
# ISA Ethernet NICs. pccard NICs included.
|
|
device cs # Crystal Semiconductor CS89x0 NIC
|
|
# 'device ed' requires 'device miibus'
|
|
device ed # NE[12]000, SMC Ultra, 3c503, DS8390 cards
|
|
device ex # Intel EtherExpress Pro/10 and Pro/10+
|
|
device ep # Etherlink III based cards
|
|
device fe # Fujitsu MB8696x based cards
|
|
device sn # SMC's 9000 series of Ethernet chips
|
|
device xe # Xircom pccard Ethernet
|
|
|
|
# Wireless NIC cards
|
|
device wlan # 802.11 support
|
|
options IEEE80211_DEBUG # enable debug msgs
|
|
options IEEE80211_AMPDU_AGE # age frames in AMPDU reorder q's
|
|
options IEEE80211_SUPPORT_MESH # enable 802.11s D3.0 support
|
|
device wlan_wep # 802.11 WEP support
|
|
device wlan_ccmp # 802.11 CCMP support
|
|
device wlan_tkip # 802.11 TKIP support
|
|
device wlan_amrr # AMRR transmit rate control algorithm
|
|
device an # Aironet 4500/4800 802.11 wireless NICs.
|
|
device ath # Atheros pci/cardbus NIC's
|
|
device ath_hal # pci/cardbus chip support
|
|
options AH_SUPPORT_AR5416 # enable AR5416 tx/rx descriptors
|
|
device ath_rate_sample # SampleRate tx rate control for ath
|
|
device ral # Ralink Technology RT2500 wireless NICs.
|
|
device wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs.
|
|
|
|
# Pseudo devices.
|
|
device loop # Network loopback
|
|
device random # Entropy device
|
|
device ether # Ethernet support
|
|
device tun # Packet tunnel.
|
|
device pty # BSD-style compatibility pseudo ttys
|
|
device md # Memory "disks"
|
|
device gif # IPv6 and IPv4 tunneling
|
|
device faith # IPv6-to-IPv4 relaying (translation)
|
|
device firmware # firmware assist module
|
|
|
|
# The `bpf' device enables the Berkeley Packet Filter.
|
|
# Be aware of the administrative consequences of enabling this!
|
|
# Note that 'bpf' is required for DHCP.
|
|
device bpf # Berkeley packet filter
|
|
|
|
# USB support
|
|
device uhci # UHCI PCI->USB interface
|
|
device ohci # OHCI PCI->USB interface
|
|
device ehci # EHCI PCI->USB interface (USB 2.0)
|
|
device usb # USB Bus (required)
|
|
#device udbp # USB Double Bulk Pipe devices
|
|
device uhid # "Human Interface Devices"
|
|
device ukbd # Keyboard
|
|
device ulpt # Printer
|
|
device umass # Disks/Mass storage - Requires scbus and da
|
|
device ums # Mouse
|
|
device rum # Ralink Technology RT2501USB wireless NICs
|
|
device uath # Atheros AR5523 wireless NICs
|
|
device ural # Ralink Technology RT2500USB wireless NICs
|
|
device zyd # ZyDAS zb1211/zb1211b wireless NICs
|
|
device urio # Diamond Rio 500 MP3 player
|
|
# USB Serial devices
|
|
device uark # Technologies ARK3116 based serial adapters
|
|
device ubsa # Belkin F5U103 and compatible serial adapters
|
|
device uftdi # For FTDI usb serial adapters
|
|
device uipaq # Some WinCE based devices
|
|
device uplcom # Prolific PL-2303 serial adapters
|
|
device uslcom # SI Labs CP2101/CP2102 serial adapters
|
|
device uvisor # Visor and Palm devices
|
|
device uvscom # USB serial support for DDI pocket's PHS
|
|
# USB Ethernet, requires miibus
|
|
device aue # ADMtek USB Ethernet
|
|
device axe # ASIX Electronics USB Ethernet
|
|
device cdce # Generic USB over Ethernet
|
|
device cue # CATC USB Ethernet
|
|
device kue # Kawasaki LSI USB Ethernet
|
|
device rue # RealTek RTL8150 USB Ethernet
|
|
device udav # Davicom DM9601E USB
|
|
|
|
# FireWire support
|
|
device firewire # FireWire bus code
|
|
device sbp # SCSI over FireWire (Requires scbus and da)
|
|
device fwe # Ethernet over FireWire (non-standard!)
|
|
device fwip # IP over FireWire (RFC 2734,3146)
|
|
device dcons # Dumb console driver
|
|
device dcons_crom # Configuration ROM for dcons
|