1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-18 10:35:55 +00:00
freebsd/usr.sbin/fdformat/fdformat.c
Joerg Wunsch 1a6bed6863 Long promised major enhancement set for the floppy disk driver:
. The main device node now supports automatic density selection for
  commonly used media densities.  So you can stuff your 1.44 MB and
  720 KB media into your drive and just access /dev/fd0, no questions
  asked.  It's all that easy, isn't it? :)

. Device density handling has been completely overhauled.  The old way
  of hardwired kernel density knowledge is no longer there.  Instead,
  the kernel now implements 16 subdevices per drive.  The first
  subdevice uses automatic density selection, while the remaining 15
  devices are freely programmable.  They can be assigned an arbitrary
  name of the form /dev/fd[:digit]+.[:digit:]{1,4}, where the second
  number is meant to either implement device names that are mnemonic
  for their raw capacity (as it used to be), or they can alternatively
  be created as "anonymous" devices like fd0.1 through fd0.15,
  depending on the taste of the administrator.  After creating a
  subdevice, it is initialized to the maximal native density of the
  respective drive type, so it needs to be customized for other
  densities by using fdcontrol(8).  Pseudo-partition devices (fd0a
  through fd0h) are still supported as symlinks.

. The old hack to use flags 0x1 to always assume drive 0 were there is
  no longer supported; this is now supposed to be done by wiring the
  devices down from the loader via device flags.  On IA32
  architectures, the first two drives are looked up in the CMOS
  configuration records though.  On PCMCIA (i. e., the Y-E Data
  controller of the Toshiba Libretto), a single drive is always
  assumed.

. Other specialities like disabling the FIFO and not probing the drive
  at boot-time are selected by per-controller or per-drive flags, too.

. Unit attentions (media has been changed) are supposed to be detected
  now; density autoselection only occurs after a unit attention.  (Can
  be turned off by a per-drive flag, this will cause each Fdopen() to
  perform the autoselection.)

. FM floppies can be handled now (on controllers that actually support
  it -- not all do these days).

. Fdopen() can be told to avoid density selection by setting
  O_NONBLOCK; this leaves the descriptor in a half-opened state where
  only a few ioctls are accepted.  This is necessary to run fdformat
  on a device that uses automatic density selection (since you cannot
  autoselect on an unformatted medium, obviously).

. Just differentiate between a plain old NE765 and the enhanced chips,
  but don't try more; the existing code was wrong and only misdetected
  the chips anyway.

BUGS and TODOs:

. All documentation update still needs to be done.

. Formatting not-so-standard format yields unpredictable results; i
  have yet to figure out why this happens.  "Standard" formats like
  720 and 1440 KB do work, however.

. rc scripts are needed to setup device nodes with nonstandard
  densities (like the old /dev/fdN.MMM we used to have).

. Obtaining device flags from the kernel environment doesn't work yet,
  thus currently only drives that are present in (IA32) CMOS are
  really detected.  Someone who knows the odds and ends about device
  flags is needed here, i can't figure out what i'm doing wrong.

. 2.88 MB still needs to be done.
2001-12-15 19:09:04 +00:00

371 lines
9.5 KiB
C

/*
* Copyright (C) 1992-1994,2001 by Joerg Wunsch, Dresden
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR(S) ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE AUTHOR(S) BE LIABLE FOR ANY DIRECT,
* INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
* $FreeBSD$
*/
#include <sys/types.h>
#include <sys/fdcio.h>
#include <sys/stat.h>
#include <ctype.h>
#include <err.h>
#include <errno.h>
#include <fcntl.h>
#include <paths.h>
#include <stdio.h>
#include <stdlib.h>
#include <strings.h>
#include <sysexits.h>
#include <unistd.h>
#include "fdutil.h"
static void
format_track(int fd, int cyl, int secs, int head, int rate,
int gaplen, int secsize, int fill, int interleave,
int offset)
{
struct fd_formb f;
int i, j, il[FD_MAX_NSEC + 1];
memset(il, 0, sizeof il);
for(j = 0, i = 1 + offset; i <= secs + offset; i++) {
while(il[(j % secs) + 1])
j++;
il[(j % secs) + 1] = i;
j += interleave;
}
f.format_version = FD_FORMAT_VERSION;
f.head = head;
f.cyl = cyl;
f.transfer_rate = rate;
f.fd_formb_secshift = secsize;
f.fd_formb_nsecs = secs;
f.fd_formb_gaplen = gaplen;
f.fd_formb_fillbyte = fill;
for(i = 0; i < secs; i++) {
f.fd_formb_cylno(i) = cyl;
f.fd_formb_headno(i) = head;
f.fd_formb_secno(i) = il[i+1];
f.fd_formb_secsize(i) = secsize;
}
if(ioctl(fd, FD_FORM, (caddr_t)&f) < 0)
err(EX_OSERR, "ioctl(FD_FORM)");
}
static int
verify_track(int fd, int track, int tracksize)
{
static char *buf;
static int bufsz;
int fdopts = -1, ofdopts, rv = 0;
if (ioctl(fd, FD_GOPTS, &fdopts) < 0)
warn("warning: ioctl(FD_GOPTS)");
else {
ofdopts = fdopts;
fdopts |= FDOPT_NORETRY;
(void)ioctl(fd, FD_SOPTS, &fdopts);
}
if (bufsz < tracksize)
buf = realloc(buf, bufsz = tracksize);
if (buf == 0)
errx(EX_UNAVAILABLE, "out of memory");
if (lseek (fd, (long) track * tracksize, 0) < 0)
rv = -1;
/* try twice reading it, without using the normal retrier */
else if (read (fd, buf, tracksize) != tracksize
&& read (fd, buf, tracksize) != tracksize)
rv = -1;
if (fdopts != -1)
(void)ioctl(fd, FD_SOPTS, &ofdopts);
return (rv);
}
static void
usage (void)
{
errx(EX_USAGE,
"usage: fdformat [-F fill] [-f fmt] [-s fmtstr] [-nqvy] device");
}
static int
yes (void)
{
char reply[256], *p;
reply[sizeof(reply) - 1] = 0;
for (;;) {
fflush(stdout);
if (!fgets (reply, sizeof(reply) - 1, stdin))
return (0);
for (p=reply; *p==' ' || *p=='\t'; ++p)
continue;
if (*p=='y' || *p=='Y')
return (1);
if (*p=='n' || *p=='N' || *p=='\n' || *p=='\r')
return (0);
printf("Answer `yes' or `no': ");
}
}
int
main(int argc, char **argv)
{
enum fd_drivetype type;
struct fd_type fdt, newft, *fdtp;
struct stat sb;
#define MAXPRINTERRS 10
struct fdc_status fdcs[MAXPRINTERRS];
int format, fill, quiet, verify, verify_only, confirm;
int fd, c, i, track, error, tracks_per_dot, bytes_per_track, errs;
int fdopts, flags;
char *fmtstring, *device;
const char *name, *descr;
format = quiet = verify_only = confirm = 0;
verify = 1;
fill = 0xf6;
fmtstring = 0;
while((c = getopt(argc, argv, "F:f:nqs:vy")) != -1)
switch(c) {
case 'F': /* fill byte */
if (getnum(optarg, &fill)) {
fprintf(stderr,
"Bad argument %s to -F option; must be numeric\n",
optarg);
usage();
}
break;
case 'f': /* format in kilobytes */
if (getnum(optarg, &format)) {
fprintf(stderr,
"Bad argument %s to -f option; must be numeric\n",
optarg);
usage();
}
break;
case 'n': /* don't verify */
verify = 0;
break;
case 'q': /* quiet */
quiet = 1;
break;
case 's': /* format string with detailed options */
fmtstring = optarg;
break;
case 'v': /* verify only */
verify = 1;
verify_only = 1;
break;
case 'y': /* confirm */
confirm = 1;
break;
default:
usage();
}
if(optind != argc - 1)
usage();
if (stat(argv[optind], &sb) == -1 && errno == ENOENT) {
/* try prepending _PATH_DEV */
device = malloc(strlen(argv[optind] + sizeof _PATH_DEV + 1));
if (device == 0)
errx(EX_UNAVAILABLE, "out of memory");
strcpy(device, _PATH_DEV);
strcat(device, argv[optind]);
if (stat(device, &sb) == -1) {
free(device);
device = argv[optind]; /* let it fail below */
}
} else {
device = argv[optind];
}
if ((fd = open(device, O_RDWR | O_NONBLOCK)) < 0)
err(EX_OSERR, "open(%s)", device);
/*
* Device initialization.
*
* First, get the device type descriptor. This tells us about
* the media geometry data we need to format a medium. It also
* lets us know quickly whether the device name actually points
* to a floppy disk drive.
*
* Then, obtain any drive options. We're mainly interested to
* see whether we're currently working on a device with media
* density autoselection (FDOPT_AUTOSEL). Then, we add the
* device option to tell the kernel not to log media errors,
* since we can handle them ourselves. If the device does
* media density autoselection, we then need to set the device
* type appropriately, since by opening with O_NONBLOCK we
* told the driver to bypass media autoselection (otherwise we
* wouldn't stand a chance to format an unformatted or damaged
* medium). We do not attempt to set the media type on any
* other devices since this is a privileged operation. For the
* same reason, specifying -f and -s options is only possible
* for autoselecting devices.
*
* Finally, we are ready to turn off O_NONBLOCK, and start to
* actually format something.
*/
if(ioctl(fd, FD_GTYPE, &fdt) < 0)
errx(EX_OSERR, "not a floppy disk: %s", device);
if (ioctl(fd, FD_GDTYPE, &type) == -1)
err(EX_OSERR, "ioctl(FD_GDTYPE)");
if (ioctl(fd, FD_GOPTS, &fdopts) == -1)
err(EX_OSERR, "ioctl(FD_GOPTS)");
fdopts |= FDOPT_NOERRLOG;
if (ioctl(fd, FD_SOPTS, &fdopts) == -1)
err(EX_OSERR, "ioctl(FD_SOPTS, FDOPT_NOERRLOG)");
if (format) {
getname(type, &name, &descr);
fdtp = get_fmt(format, type);
if (fdtp == 0)
errx(EX_USAGE,
"unknown format %d KB for drive type %s",
format, name);
fdt = *fdtp;
}
if (fmtstring) {
parse_fmt(fmtstring, type, fdt, &newft);
fdt = newft;
}
if (fdopts & FDOPT_AUTOSEL) {
if (ioctl(fd, FD_STYPE, &fdt) < 0)
err(EX_OSERR, "ioctl(FD_STYPE)");
} else if (fmtstring || format) {
errx(EX_USAGE,
"-f fmt or -s fmtstr is only allowed for autoselecting devices");
}
if ((flags = fcntl(fd, F_GETFL, 0)) == -1)
err(EX_OSERR, "fcntl(F_GETFL)");
flags &= ~O_NONBLOCK;
if (fcntl(fd, F_SETFL, flags) == -1)
err(EX_OSERR, "fcntl(F_SETFL)");
bytes_per_track = fdt.sectrac * (128 << fdt.secsize);
/* XXX 20/40 = 0.5 */
tracks_per_dot = (fdt.tracks * fdt.heads + 20) / 40;
if (verify_only) {
if(!quiet)
printf("Verify %dK floppy `%s'.\n",
fdt.tracks * fdt.heads * bytes_per_track / 1024,
device);
}
else if(!quiet && !confirm) {
printf("Format %dK floppy `%s'? (y/n): ",
fdt.tracks * fdt.heads * bytes_per_track / 1024,
device);
if(!yes()) {
printf("Not confirmed.\n");
return (EX_UNAVAILABLE);
}
}
/*
* Formatting.
*/
if(!quiet) {
printf("Processing ");
for (i = 0; i < (fdt.tracks * fdt.heads) / tracks_per_dot; i++)
putchar('-');
printf("\rProcessing ");
fflush(stdout);
}
error = errs = 0;
for (track = 0; track < fdt.tracks * fdt.heads; track++) {
if (!verify_only) {
format_track(fd, track / fdt.heads, fdt.sectrac,
track % fdt.heads, fdt.trans, fdt.f_gap,
fdt.secsize, fill, fdt.f_inter,
track % fdt.heads? fdt.offset_side2: 0);
if(!quiet && !((track + 1) % tracks_per_dot)) {
putchar('F');
fflush(stdout);
}
}
if (verify) {
if (verify_track(fd, track, bytes_per_track) < 0) {
error = 1;
if (errs < MAXPRINTERRS && errno == EIO) {
if (ioctl(fd, FD_GSTAT, fdcs + errs) ==
-1)
errx(EX_IOERR,
"floppy IO error, but no FDC status");
errs++;
}
}
if(!quiet && !((track + 1) % tracks_per_dot)) {
if (!verify_only)
putchar('\b');
if (error) {
putchar('E');
error = 0;
}
else
putchar('V');
fflush(stdout);
}
}
}
if(!quiet)
printf(" done.\n");
if (!quiet && errs) {
fflush(stdout);
fprintf(stderr, "Errors encountered:\nCyl Head Sect Error\n");
for (i = 0; i < errs && i < MAXPRINTERRS; i++) {
fprintf(stderr, " %2d %2d %2d ",
fdcs[i].status[3], fdcs[i].status[4],
fdcs[i].status[5]);
printstatus(fdcs + i, 1);
putc('\n', stderr);
}
if (errs >= MAXPRINTERRS)
fprintf(stderr, "(Further errors not printed.)\n");
}
return errs != 0;
}