1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-16 10:20:30 +00:00
freebsd/usr.bin/doscmd/int14.c
John Dyson 90c38ed200 Add our doscmd to the tree. This is a result of work from BSDI, and
a group of dos emulator developers.
Submitted by:	Jonathan Lemon <jlemon@americantv.com>
Obtained from:	BSDI
1997-08-09 01:43:15 +00:00

511 lines
13 KiB
C

/*
* Copyright (c) 1992, 1993, 1996
* Berkeley Software Design, Inc. All rights reserved.
*
* This code is derived from software contributed to Berkeley Software
* Design, Inc. by Mark Linoman.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Berkeley Software
* Design, Inc.
*
* THIS SOFTWARE IS PROVIDED BY Berkeley Software Design, Inc. ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL Berkeley Software Design, Inc. BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* BSDI int14.c,v 2.2 1996/04/08 19:32:45 bostic Exp
*
* $Id: int14.c,v 1.3 1996/09/22 15:42:53 miff Exp $
*/
#include "doscmd.h"
#include <sys/ioctl.h>
#include <termios.h>
#include "com.h"
struct com_data_struct com_data[N_COMS_MAX];
struct queue *create_queue() { return(0); }
int get_char_q() {}
int queue_not_empty() {}
int reset_irq_request() {}
int set_irq_request() {}
int test_irq_request() {}
int write_div_latches() {}
void
int14(regcontext_t *REGS)
{
int reg_num;
struct com_data_struct *cdsp;
int i;
int nbytes;
char c;
debug (D_PORT, "int14: dl = 0x%02X, al = 0x%02X.\n", R_DL, R_AL);
if (R_DL >= N_COMS_MAX) {
if (vflag)
dump_regs(REGS);
fatal ("int14: illegal com port COM%d", R_DL + 1);
}
cdsp = &(com_data[R_DL]);
switch (R_AH) {
case 0x00: /* Initialize Serial Port */
#if 0 /* hold off: try to defeat stupid DOS defaults */
com_set_line(cdsp, R_DL + 1, R_AL);
R_AH = LS_X_SHFT_E | LS_X_HOLD_E;
R_AL = 0;
#endif 0
break;
case 0x01: /* Write Character */
errno = 0;
c = R_AL;
nbytes = write(cdsp->fd, &c, 1);
debug (D_PORT, "write of 0x%02x to fd %d on '%s' returned %d %s\n",
R_AL, cdsp->fd, cdsp->path, nbytes, strerror(errno));
if (nbytes == 1) {
R_AH = LS_X_SHFT_E | LS_X_HOLD_E;
R_AL = 0;
} else {
debug(D_PORT, "int14: lost output character 0x%02x\n",
R_AL);
R_AH = LS_SW_TIME_OUT;
R_AL = 0;
}
break;
case 0x02: /* Read Character */
errno = 0;
nbytes = read(cdsp->fd, &c, 1);
debug (D_PORT, "read of fd %d on '%s' returned %d byte 0x%02x %s\n",
cdsp->fd, cdsp->path, nbytes, c,
errno ? strerror(errno) : "");
if (nbytes == 1) {
R_AH = LS_X_SHFT_E | LS_X_HOLD_E;
R_AL = c;
} else {
R_AH = LS_SW_TIME_OUT;
R_AL = 0x60;
}
break;
case 0x03: /* Status Request */
R_AX = (LS_X_SHFT_E | LS_X_HOLD_E) << 8;
break;
case 0x04: /* Extended Initialization */
R_AX = (LS_SW_TIME_OUT) << 8;
break;
case 0x05: /* Modem Control Register operations */
switch (R_AH) {
case 0x00: /* Read Modem Control Register */
R_AX = (LS_SW_TIME_OUT) << 8;
break;
case 0x01: /* Write Modem Control Register */
R_AX = (LS_SW_TIME_OUT) << 8;
break;
default:
unknown_int3(0x14, 0x05, R_AL, REGS);
break;
}
break;
default:
unknown_int2(0x14, R_AH, REGS);
break;
}
}
/* called when doscmd initializes a single line */
void
com_set_line(struct com_data_struct *cdsp, unsigned char port, unsigned char param)
{
struct termios tty;
struct stat stat_buf;
int mode = 0; /* read|write */
int speed;
int reg_num;
int ret_val;
debug (D_PORT, "com_set_line: cdsp = 0x%08X, port = 0x%04x,"
"param = 0x%04X.\n", cdsp, port, param);
if (cdsp->fd > 0) {
debug (D_PORT, "Re-initialize serial port com%d\n", port);
(void)close(cdsp->fd);
} else {
debug (D_PORT, "Initialize serial port com%d\n", port);
}
stat(cdsp->path, &stat_buf);
if (!S_ISCHR(stat_buf.st_mode) ||
((cdsp->fd = open(cdsp->path, O_RDWR | O_NONBLOCK, 0666)) == -1)) {
debug (D_PORT,
"Could not initialize serial port com%d on path '%s'\n",
port, cdsp->path);
return;
}
cdsp->flags = 0x00;
cdsp->last_char_read = 0x00;
#if 0
if ((param & PARITY_EVEN) == PARITY_NONE)
tty.c_iflag = IGNBRK | IGNPAR | IXON | IXOFF /* | IXANY */;
else
tty.c_iflag = IGNBRK | IXON | IXOFF /* | IXANY */;
tty.c_oflag = 0;
tty.c_lflag = 0;
tty.c_cc[VTIME] = 0;
tty.c_cc[VMIN] = 1;
tty.c_cflag = CREAD | CLOCAL | HUPCL;
/* MCL WHY CLOCAL ??????; but, gets errno EIO on writes, else */
if ((param & TXLEN_8BITS) == TXLEN_8BITS)
tty.c_cflag |= CS8;
else
tty.c_cflag |= CS7;
if ((param & STOPBIT_2) == STOPBIT_2)
tty.c_cflag |= CSTOPB;
switch (param & PARITY_EVEN) {
case (PARITY_ODD):
tty.c_cflag |= (PARENB | PARODD);
break;
case (PARITY_EVEN):
tty.c_cflag |= PARENB;
break;
case (PARITY_NONE):
default:
break;
}
switch (param & BITRATE_9600) {
case (BITRATE_110):
speed = B110;
break;
case (BITRATE_150):
speed = B150;
break;
case (BITRATE_300):
speed = B300;
break;
case (BITRATE_600):
speed = B600;
break;
case (BITRATE_1200):
speed = B1200;
break;
case (BITRATE_2400):
speed = B2400;
break;
case (BITRATE_4800):
speed = B4800;
break;
case (BITRATE_9600):
speed = B9600;
break;
}
debug (D_PORT, "com_set_line: going with cflag 0x%X iflag 0x%X speed %d.\n",
tty.c_cflag, tty.c_iflag, speed);
errno = 0;
ret_val = cfsetispeed(&tty, speed);
debug (D_PORT, "com_set_line: cfsetispeed returned 0x%X.\n", ret_val);
errno = 0;
ret_val = cfsetospeed(&tty, speed);
debug (D_PORT, "com_set_line: cfsetospeed returned 0x%X.\n", ret_val);
errno = 0;
ret_val = tcsetattr(cdsp->fd, 0, &tty);
debug (D_PORT, "com_set_line: tcsetattr returned 0x%X.\n", ret_val);
errno = 0;
ret_val = fcntl(cdsp->fd, F_SETFL, O_NDELAY);
debug (D_PORT, "fcntl of 0x%X, 0x%X to fd %d returned %d errno %d\n",
F_SETFL, O_NDELAY, cdsp->fd, ret_val, errno);
errno = 0;
ret_val = ioctl(cdsp->fd, TIOCFLUSH, &mode);
debug (D_PORT, "ioctl of 0x%02x to fd %d on 0x%X returned %d errno %d\n",
TIOCFLUSH, cdsp->fd, mode, ret_val, errno);
#endif
for (reg_num = 0; reg_num < N_OF_COM_REGS; reg_num++) {
define_input_port_handler(cdsp->addr + reg_num,
com_port_in);
define_output_port_handler(cdsp->addr + reg_num,
com_port_out);
}
cdsp->com_queue = create_queue(cdsp->irq);
debug(D_PORT, "com%d: attached '%s' at addr 0x%04x irq %d\n",
port, cdsp->path, cdsp->addr, cdsp->irq);
}
/* called when config.c initializes a single line */
void
init_com(int port, char *path, int addr, unsigned char irq)
{
struct com_data_struct *cdsp;
debug (D_PORT, "init_com: port = 0x%04x, addr = 0x%04X, irq = %d.\n",
port, addr, irq);
cdsp = &(com_data[port]);
cdsp->path = path; /* XXX DEBUG strcpy? */
cdsp->addr = addr;
cdsp->irq = irq;
cdsp->fd = -1;
com_set_line(cdsp, port + 1, TXLEN_8BITS | BITRATE_9600);
}
/* called when DOS wants to read directly from a physical port */
unsigned char
com_port_in(int port)
{
struct com_data_struct *cdsp;
unsigned char rs;
unsigned char i;
int nbytes;
/* search for a valid COM ???or MOUSE??? port */
for (i = 0; i < N_COMS_MAX; i++) {
if (com_data[i].addr == ((unsigned short)port & 0xfff8)) {
cdsp = &(com_data[i]);
break;
}
}
if (i == N_COMS_MAX) {
debug (D_PORT, "com port 0x%04x not found\n", port);
return 0xff;
}
switch (port - cdsp->addr) {
/* 0x03F8 - (receive buffer) or (divisor latch LO) */
case 0:
if (cdsp->line_ctrl & LC_DIV_ACC)
rs = cdsp->div_latch[DIV_LATCH_LOW];
else {
#if 0
if (queue_not_empty(cdsp->com_queue)) {
rs = get_char_q(cdsp->com_queue);
cdsp->last_char_read = rs;
if (queue_not_empty(cdsp->com_queue) &&
(cdsp->int_enable & IE_RCV_DATA) != 0) {
debug(D_PORT,
"com_port_in: setting irq %d because bytes yet to be read.\n",
cdsp->irq);
set_irq_request(cdsp->irq);
}
} else
#else
errno = 0;
nbytes = read(cdsp->fd, &rs, 1);
debug (D_PORT, "read of fd %d on '%s' returned %d byte 0x%02x errno %d\n",
cdsp->fd, cdsp->path, nbytes, rs, errno);
if (nbytes != 1)
#endif
rs = cdsp->last_char_read;
}
break;
/* 0x03F9 - (interrupt enable) or (divisor latch HI) */
case 1:
if (cdsp->line_ctrl & LC_DIV_ACC)
rs = cdsp->div_latch[DIV_LATCH_HIGH];
else
rs = cdsp->int_enable;
/* 0x03FA - interrupt identification register */
case 2:
/* rs = cdsp->int_id; * XXX DEBUG not initialized */
rs = 0;
if ((queue_not_empty(cdsp->com_queue))
&& (test_irq_request(cdsp->irq) != 0))
rs |= II_PEND_INT | II_RCV_DATA;
if ((cdsp->fifo_ctrl & FC_FIFO_EN) == FC_FIFO_EN)
rs |= II_FIFOS_EN;
break;
/* 0x03FB - line control register */
case 3:
rs = cdsp->line_ctrl;
break;
/* 0x03FC - modem control register */
case 4:
rs = cdsp->modem_ctrl;
break;
/* 0x03FD - line status register */
case 5:
rs = LS_X_SHFT_E | LS_X_HOLD_E;
/* if (queue_not_empty(cdsp->com_queue)) */
ioctl(cdsp->fd, FIONREAD, &nbytes);
if (nbytes > 0);
rs |= LS_RCV_DATA_RD;
break;
/* 0x03FE - modem status register */
case 6:
rs = cdsp->modem_stat | MS_DCD | MS_DSR | MS_CTS;
break;
/* 0x03FF - spare register */
case 7:
rs = cdsp->uart_spare;
break;
default:
debug(D_PORT, "com_port_in: illegal port index 0x%04x - 0x%04x\n",
port, cdsp->addr);
break;
}
return rs;
}
/* called when DOS wants to write directly to a physical port */
void
com_port_out(int port, unsigned char val)
{
struct com_data_struct *cdsp;
int nbytes;
int i;
/* search for a valid COM ???or MOUSE??? port */
for (i = 0; i < N_COMS_MAX; i++) {
if (com_data[i].addr == ((unsigned short)port & 0xfff8)) {
cdsp = &(com_data[i]);
break;
}
}
if (i == N_COMS_MAX) {
debug (D_PORT, "com port 0x%04x not found\n", port);
return;
}
switch (port - cdsp->addr) {
/* 0x03F8 - (transmit buffer) or (divisor latch LO) */
case 0:
if (cdsp->line_ctrl & LC_DIV_ACC) {
cdsp->div_latch[DIV_LATCH_LOW] = val;
cdsp->flags |= DIV_LATCH_LOW_WRITTEN;
write_div_latches(cdsp);
} else {
errno = 0;
nbytes = write(cdsp->fd, val, 1);
debug (D_PORT, "write of 0x%02x to fd %d on '%s' returned %d errno %d\n",
val, cdsp->fd, cdsp->path, nbytes, errno);
if (nbytes != 1)
debug(D_PORT,
"int14: lost output character 0x%02x\n",
val);
}
break;
/* 0x03F9 - (interrupt enable) or (divisor latch HI) */
case 1:
if (cdsp->line_ctrl & LC_DIV_ACC) {
cdsp->div_latch[DIV_LATCH_HIGH] = val;
cdsp->flags |= DIV_LATCH_HIGH_WRITTEN;
write_div_latches(cdsp);
} else {
cdsp->int_enable = val;
if ((val & IE_RCV_DATA) == 0) {
reset_irq_request(cdsp->irq);
} else {
if (queue_not_empty(cdsp->com_queue)) {
set_irq_request(cdsp->irq);
}
}
}
break;
/* 0x03FA - FIFO control register */
case 2:
cdsp->fifo_ctrl = val;
break;
/* 0x03FB - line control register */
case 3:
cdsp->line_ctrl = val;
break;
/* 0x03FC - modem control register */
case 4:
cdsp->modem_ctrl = val;
break;
/* 0x03FD - line status register */
case 5:
cdsp->line_stat = val;
break;
/* 0x03FE - modem status register */
case 6:
cdsp->modem_stat = val;
break;
/* 0x03FF - spare register */
case 7:
cdsp->uart_spare = val;
break;
default:
debug(D_PORT, "com_port_out: illegal port index 0x%04x - 0x%04x\n",
port, cdsp->addr);
break;
}
}
#if 0
/*
* called when BSD has bytes ready (as discovered via select) for DOS
*/
static void do_com_input(int fd)
{
struct com_data_struct *cdsp;
unsigned char buffer[BUFSIZE];
int i, nbytes;
dp = search_com_device_by_fd(fd);
if (dp == NULL)
return;
do {
nbytes = read(cdsp->fd, buffer, BUFSIZE);
if (nbytes > 0) {
debug(D_PORT, "do_com_input: read %d bytes from fd %d (aka %d): ",
nbytes, fd, cdsp->fd);
for (i = 0; i < nbytes; i++) {
put_char_q(cdsp->com_queue, buffer[i]);
if (cdsp->int_enable & IE_RCV_DATA) {
debug(D_PORT, "\n");
debug(D_PORT, "do_com_input: setting irq %d because %d bytes read.\n",
dp->irq, nbytes);
debug(D_PORT, "do_com_input: ");
set_irq_request(dp->irq);
}
debug(D_PORT, "%02x ", buffer[i]);
}
debug(D_PORT, "\n");
}
} while (nbytes == BUFSIZE);
}
#endif 0