mirror of
https://git.FreeBSD.org/src.git
synced 2024-12-30 12:04:07 +00:00
c3a0f75a9f
In order to use platorm backend hardware driver should
impement three methods:
- platform_start_transfer and platform_finish_transfer
to start and finish transfer
- platform_will_handle - check whether transaction is
suitable for backend. If not - driver will fall back
to PIO mode.
Submitted by: Daisuke Aoyama <aoyama at peach.ne.jp>
Approved by: ian@
276 lines
9.8 KiB
C
276 lines
9.8 KiB
C
/*-
|
|
* Copyright (c) 2008 Alexander Motin <mav@FreeBSD.org>
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
#ifndef __SDHCI_H__
|
|
#define __SDHCI_H__
|
|
|
|
#define DMA_BLOCK_SIZE 4096
|
|
#define DMA_BOUNDARY 0 /* DMA reload every 4K */
|
|
|
|
/* Controller doesn't honor resets unless we touch the clock register */
|
|
#define SDHCI_QUIRK_CLOCK_BEFORE_RESET (1<<0)
|
|
/* Controller really supports DMA */
|
|
#define SDHCI_QUIRK_FORCE_DMA (1<<1)
|
|
/* Controller has unusable DMA engine */
|
|
#define SDHCI_QUIRK_BROKEN_DMA (1<<2)
|
|
/* Controller doesn't like to be reset when there is no card inserted. */
|
|
#define SDHCI_QUIRK_NO_CARD_NO_RESET (1<<3)
|
|
/* Controller has flaky internal state so reset it on each ios change */
|
|
#define SDHCI_QUIRK_RESET_ON_IOS (1<<4)
|
|
/* Controller can only DMA chunk sizes that are a multiple of 32 bits */
|
|
#define SDHCI_QUIRK_32BIT_DMA_SIZE (1<<5)
|
|
/* Controller needs to be reset after each request to stay stable */
|
|
#define SDHCI_QUIRK_RESET_AFTER_REQUEST (1<<6)
|
|
/* Controller has an off-by-one issue with timeout value */
|
|
#define SDHCI_QUIRK_INCR_TIMEOUT_CONTROL (1<<7)
|
|
/* Controller has broken read timings */
|
|
#define SDHCI_QUIRK_BROKEN_TIMINGS (1<<8)
|
|
/* Controller needs lowered frequency */
|
|
#define SDHCI_QUIRK_LOWER_FREQUENCY (1<<9)
|
|
/* Data timeout is invalid, should use SD clock */
|
|
#define SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK (1<<10)
|
|
/* Timeout value is invalid, should be overriden */
|
|
#define SDHCI_QUIRK_BROKEN_TIMEOUT_VAL (1<<11)
|
|
/* SDHCI_CAPABILITIES is invalid */
|
|
#define SDHCI_QUIRK_MISSING_CAPS (1<<12)
|
|
|
|
/*
|
|
* Controller registers
|
|
*/
|
|
#define SDHCI_DMA_ADDRESS 0x00
|
|
|
|
#define SDHCI_BLOCK_SIZE 0x04
|
|
#define SDHCI_MAKE_BLKSZ(dma, blksz) (((dma & 0x7) << 12) | (blksz & 0xFFF))
|
|
|
|
#define SDHCI_BLOCK_COUNT 0x06
|
|
|
|
#define SDHCI_ARGUMENT 0x08
|
|
|
|
#define SDHCI_TRANSFER_MODE 0x0C
|
|
#define SDHCI_TRNS_DMA 0x01
|
|
#define SDHCI_TRNS_BLK_CNT_EN 0x02
|
|
#define SDHCI_TRNS_ACMD12 0x04
|
|
#define SDHCI_TRNS_READ 0x10
|
|
#define SDHCI_TRNS_MULTI 0x20
|
|
|
|
#define SDHCI_COMMAND_FLAGS 0x0E
|
|
#define SDHCI_CMD_RESP_NONE 0x00
|
|
#define SDHCI_CMD_RESP_LONG 0x01
|
|
#define SDHCI_CMD_RESP_SHORT 0x02
|
|
#define SDHCI_CMD_RESP_SHORT_BUSY 0x03
|
|
#define SDHCI_CMD_RESP_MASK 0x03
|
|
#define SDHCI_CMD_CRC 0x08
|
|
#define SDHCI_CMD_INDEX 0x10
|
|
#define SDHCI_CMD_DATA 0x20
|
|
#define SDHCI_CMD_TYPE_NORMAL 0x00
|
|
#define SDHCI_CMD_TYPE_SUSPEND 0x40
|
|
#define SDHCI_CMD_TYPE_RESUME 0x80
|
|
#define SDHCI_CMD_TYPE_ABORT 0xc0
|
|
#define SDHCI_CMD_TYPE_MASK 0xc0
|
|
|
|
#define SDHCI_COMMAND 0x0F
|
|
|
|
#define SDHCI_RESPONSE 0x10
|
|
|
|
#define SDHCI_BUFFER 0x20
|
|
|
|
#define SDHCI_PRESENT_STATE 0x24
|
|
#define SDHCI_CMD_INHIBIT 0x00000001
|
|
#define SDHCI_DAT_INHIBIT 0x00000002
|
|
#define SDHCI_DAT_ACTIVE 0x00000004
|
|
#define SDHCI_DOING_WRITE 0x00000100
|
|
#define SDHCI_DOING_READ 0x00000200
|
|
#define SDHCI_SPACE_AVAILABLE 0x00000400
|
|
#define SDHCI_DATA_AVAILABLE 0x00000800
|
|
#define SDHCI_CARD_PRESENT 0x00010000
|
|
#define SDHCI_CARD_STABLE 0x00020000
|
|
#define SDHCI_CARD_PIN 0x00040000
|
|
#define SDHCI_WRITE_PROTECT 0x00080000
|
|
#define SDHCI_STATE_DAT 0x00700000
|
|
#define SDHCI_STATE_CMD 0x00800000
|
|
|
|
#define SDHCI_HOST_CONTROL 0x28
|
|
#define SDHCI_CTRL_LED 0x01
|
|
#define SDHCI_CTRL_4BITBUS 0x02
|
|
#define SDHCI_CTRL_HISPD 0x04
|
|
#define SDHCI_CTRL_SDMA 0x08
|
|
#define SDHCI_CTRL_ADMA2 0x10
|
|
#define SDHCI_CTRL_ADMA264 0x18
|
|
#define SDHCI_CTRL_CARD_DET 0x40
|
|
#define SDHCI_CTRL_FORCE_CARD 0x80
|
|
|
|
#define SDHCI_POWER_CONTROL 0x29
|
|
#define SDHCI_POWER_ON 0x01
|
|
#define SDHCI_POWER_180 0x0A
|
|
#define SDHCI_POWER_300 0x0C
|
|
#define SDHCI_POWER_330 0x0E
|
|
|
|
#define SDHCI_BLOCK_GAP_CONTROL 0x2A
|
|
|
|
#define SDHCI_WAKE_UP_CONTROL 0x2B
|
|
|
|
#define SDHCI_CLOCK_CONTROL 0x2C
|
|
#define SDHCI_DIVIDER_MASK 0xff
|
|
#define SDHCI_DIVIDER_MASK_LEN 8
|
|
#define SDHCI_DIVIDER_SHIFT 8
|
|
#define SDHCI_DIVIDER_HI_MASK 3
|
|
#define SDHCI_DIVIDER_HI_SHIFT 6
|
|
#define SDHCI_CLOCK_CARD_EN 0x0004
|
|
#define SDHCI_CLOCK_INT_STABLE 0x0002
|
|
#define SDHCI_CLOCK_INT_EN 0x0001
|
|
|
|
#define SDHCI_TIMEOUT_CONTROL 0x2E
|
|
|
|
#define SDHCI_SOFTWARE_RESET 0x2F
|
|
#define SDHCI_RESET_ALL 0x01
|
|
#define SDHCI_RESET_CMD 0x02
|
|
#define SDHCI_RESET_DATA 0x04
|
|
|
|
#define SDHCI_INT_STATUS 0x30
|
|
#define SDHCI_INT_ENABLE 0x34
|
|
#define SDHCI_SIGNAL_ENABLE 0x38
|
|
#define SDHCI_INT_RESPONSE 0x00000001
|
|
#define SDHCI_INT_DATA_END 0x00000002
|
|
#define SDHCI_INT_BLOCK_GAP 0x00000004
|
|
#define SDHCI_INT_DMA_END 0x00000008
|
|
#define SDHCI_INT_SPACE_AVAIL 0x00000010
|
|
#define SDHCI_INT_DATA_AVAIL 0x00000020
|
|
#define SDHCI_INT_CARD_INSERT 0x00000040
|
|
#define SDHCI_INT_CARD_REMOVE 0x00000080
|
|
#define SDHCI_INT_CARD_INT 0x00000100
|
|
#define SDHCI_INT_ERROR 0x00008000
|
|
#define SDHCI_INT_TIMEOUT 0x00010000
|
|
#define SDHCI_INT_CRC 0x00020000
|
|
#define SDHCI_INT_END_BIT 0x00040000
|
|
#define SDHCI_INT_INDEX 0x00080000
|
|
#define SDHCI_INT_DATA_TIMEOUT 0x00100000
|
|
#define SDHCI_INT_DATA_CRC 0x00200000
|
|
#define SDHCI_INT_DATA_END_BIT 0x00400000
|
|
#define SDHCI_INT_BUS_POWER 0x00800000
|
|
#define SDHCI_INT_ACMD12ERR 0x01000000
|
|
#define SDHCI_INT_ADMAERR 0x02000000
|
|
|
|
#define SDHCI_INT_NORMAL_MASK 0x00007FFF
|
|
#define SDHCI_INT_ERROR_MASK 0xFFFF8000
|
|
|
|
#define SDHCI_INT_CMD_MASK (SDHCI_INT_RESPONSE | SDHCI_INT_TIMEOUT | \
|
|
SDHCI_INT_CRC | SDHCI_INT_END_BIT | SDHCI_INT_INDEX)
|
|
#define SDHCI_INT_DATA_MASK (SDHCI_INT_DATA_END | SDHCI_INT_DMA_END | \
|
|
SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL | \
|
|
SDHCI_INT_DATA_TIMEOUT | SDHCI_INT_DATA_CRC | \
|
|
SDHCI_INT_DATA_END_BIT)
|
|
|
|
#define SDHCI_ACMD12_ERR 0x3C
|
|
|
|
#define SDHCI_CAPABILITIES 0x40
|
|
#define SDHCI_TIMEOUT_CLK_MASK 0x0000003F
|
|
#define SDHCI_TIMEOUT_CLK_SHIFT 0
|
|
#define SDHCI_TIMEOUT_CLK_UNIT 0x00000080
|
|
#define SDHCI_CLOCK_BASE_MASK 0x00003F00
|
|
#define SDHCI_CLOCK_V3_BASE_MASK 0x0000FF00
|
|
#define SDHCI_CLOCK_BASE_SHIFT 8
|
|
#define SDHCI_MAX_BLOCK_MASK 0x00030000
|
|
#define SDHCI_MAX_BLOCK_SHIFT 16
|
|
#define SDHCI_CAN_DO_ADMA2 0x00080000
|
|
#define SDHCI_CAN_DO_HISPD 0x00200000
|
|
#define SDHCI_CAN_DO_DMA 0x00400000
|
|
#define SDHCI_CAN_DO_SUSPEND 0x00800000
|
|
#define SDHCI_CAN_VDD_330 0x01000000
|
|
#define SDHCI_CAN_VDD_300 0x02000000
|
|
#define SDHCI_CAN_VDD_180 0x04000000
|
|
#define SDHCI_CAN_DO_64BIT 0x10000000
|
|
|
|
#define SDHCI_MAX_CURRENT 0x48
|
|
|
|
#define SDHCI_SLOT_INT_STATUS 0xFC
|
|
|
|
#define SDHCI_HOST_VERSION 0xFE
|
|
#define SDHCI_VENDOR_VER_MASK 0xFF00
|
|
#define SDHCI_VENDOR_VER_SHIFT 8
|
|
#define SDHCI_SPEC_VER_MASK 0x00FF
|
|
#define SDHCI_SPEC_VER_SHIFT 0
|
|
#define SDHCI_SPEC_100 0
|
|
#define SDHCI_SPEC_200 1
|
|
#define SDHCI_SPEC_300 2
|
|
|
|
struct sdhci_slot {
|
|
u_int quirks; /* Chip specific quirks */
|
|
u_int caps; /* Override SDHCI_CAPABILITIES */
|
|
device_t bus; /* Bus device */
|
|
device_t dev; /* Slot device */
|
|
u_char num; /* Slot number */
|
|
u_char opt; /* Slot options */
|
|
#define SDHCI_HAVE_DMA 1
|
|
#define SDHCI_PLATFORM_TRANSFER 2
|
|
u_char version;
|
|
uint32_t max_clk; /* Max possible freq */
|
|
uint32_t timeout_clk; /* Timeout freq */
|
|
bus_dma_tag_t dmatag;
|
|
bus_dmamap_t dmamap;
|
|
u_char *dmamem;
|
|
bus_addr_t paddr; /* DMA buffer address */
|
|
struct task card_task; /* Card presence check task */
|
|
struct callout card_callout; /* Card insert delay callout */
|
|
struct mmc_host host; /* Host parameters */
|
|
struct mmc_request *req; /* Current request */
|
|
struct mmc_command *curcmd; /* Current command of current request */
|
|
|
|
uint32_t intmask; /* Current interrupt mask */
|
|
uint32_t clock; /* Current clock freq. */
|
|
size_t offset; /* Data buffer offset */
|
|
uint8_t hostctrl; /* Current host control register */
|
|
u_char power; /* Current power */
|
|
u_char bus_busy; /* Bus busy status */
|
|
u_char cmd_done; /* CMD command part done flag */
|
|
u_char data_done; /* DAT command part done flag */
|
|
u_char flags; /* Request execution flags */
|
|
#define CMD_STARTED 1
|
|
#define STOP_STARTED 2
|
|
#define SDHCI_USE_DMA 4 /* Use DMA for this req. */
|
|
#define PLATFORM_DATA_STARTED 8 /* Data transfer is handled by platform */
|
|
struct mtx mtx; /* Slot mutex */
|
|
};
|
|
|
|
int sdhci_generic_read_ivar(device_t bus, device_t child, int which, uintptr_t *result);
|
|
int sdhci_generic_write_ivar(device_t bus, device_t child, int which, uintptr_t value);
|
|
int sdhci_init_slot(device_t dev, struct sdhci_slot *slot, int num);
|
|
void sdhci_start_slot(struct sdhci_slot *slot);
|
|
/* performs generic clean-up for platform transfers */
|
|
void sdhci_finish_data(struct sdhci_slot *slot);
|
|
int sdhci_cleanup_slot(struct sdhci_slot *slot);
|
|
int sdhci_generic_suspend(struct sdhci_slot *slot);
|
|
int sdhci_generic_resume(struct sdhci_slot *slot);
|
|
int sdhci_generic_update_ios(device_t brdev, device_t reqdev);
|
|
int sdhci_generic_request(device_t brdev, device_t reqdev, struct mmc_request *req);
|
|
int sdhci_generic_get_ro(device_t brdev, device_t reqdev);
|
|
int sdhci_generic_acquire_host(device_t brdev, device_t reqdev);
|
|
int sdhci_generic_release_host(device_t brdev, device_t reqdev);
|
|
void sdhci_generic_intr(struct sdhci_slot *slot);
|
|
uint32_t sdhci_generic_min_freq(device_t brdev, struct sdhci_slot *slot);
|
|
|
|
#endif /* __SDHCI_H__ */
|