1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-29 12:03:03 +00:00
freebsd/sys/net/if_arp.h
Luigi Rizzo 212b6d5244 + rename and document an unused field in struct arpcom (field is still
there so there are no ABI changes);
+ replace 5 redefinitions of the IPF2AC macro with one in if_arp.h

Eventually (but before freezing the ABI) we need to get rid of
struct arpcom (initially with the help of some smart #defines
to avoid having to touch each and every driver, see below).

Apart from the struct ifnet, struct arpcom now only stores a copy
of the MAC address (ac_enaddr, but we already have another copy in
the struct ifnet -- if_addrhead), and a netgraph-specific field
which is _always_ accessed through the ifp, so it might well go
into the struct ifnet too (where, besides, there is already an entry
for AF_NETGRAPH data...)

Too bad ac_enaddr is widely referenced by all drivers. But
this can be fixed as follows:

#define ac_enaddr       ac_if.the_original_ac_enaddr_in_struct_ifnet

(note that the right hand side would likely be a pointer rather than
the base address of an array.)
2004-04-18 01:15:32 +00:00

120 lines
4.8 KiB
C

/*
* Copyright (c) 1986, 1993
* The Regents of the University of California. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @(#)if_arp.h 8.1 (Berkeley) 6/10/93
* $FreeBSD$
*/
#ifndef _NET_IF_ARP_H_
#define _NET_IF_ARP_H_
/*
* Address Resolution Protocol.
*
* See RFC 826 for protocol description. ARP packets are variable
* in size; the arphdr structure defines the fixed-length portion.
* Protocol type values are the same as those for 10 Mb/s Ethernet.
* It is followed by the variable-sized fields ar_sha, arp_spa,
* arp_tha and arp_tpa in that order, according to the lengths
* specified. Field names used correspond to RFC 826.
*/
struct arphdr {
u_short ar_hrd; /* format of hardware address */
#define ARPHRD_ETHER 1 /* ethernet hardware format */
#define ARPHRD_IEEE802 6 /* token-ring hardware format */
#define ARPHRD_ARCNET 7 /* arcnet hardware format */
#define ARPHRD_FRELAY 15 /* frame relay hardware format */
u_short ar_pro; /* format of protocol address */
u_char ar_hln; /* length of hardware address */
u_char ar_pln; /* length of protocol address */
u_short ar_op; /* one of: */
#define ARPOP_REQUEST 1 /* request to resolve address */
#define ARPOP_REPLY 2 /* response to previous request */
#define ARPOP_REVREQUEST 3 /* request protocol address given hardware */
#define ARPOP_REVREPLY 4 /* response giving protocol address */
#define ARPOP_INVREQUEST 8 /* request to identify peer */
#define ARPOP_INVREPLY 9 /* response identifying peer */
/*
* The remaining fields are variable in size,
* according to the sizes above.
*/
#ifdef COMMENT_ONLY
u_char ar_sha[]; /* sender hardware address */
u_char ar_spa[]; /* sender protocol address */
u_char ar_tha[]; /* target hardware address */
u_char ar_tpa[]; /* target protocol address */
#endif
};
#define ar_sha(ap) (((caddr_t)((ap)+1)) + 0)
#define ar_spa(ap) (((caddr_t)((ap)+1)) + (ap)->ar_hln)
#define ar_tha(ap) (((caddr_t)((ap)+1)) + (ap)->ar_hln + (ap)->ar_pln)
#define ar_tpa(ap) (((caddr_t)((ap)+1)) + 2*(ap)->ar_hln + (ap)->ar_pln)
#define arphdr_len2(ar_hln, ar_pln) \
(sizeof(struct arphdr) + 2*(ar_hln) + 2*(ar_pln))
#define arphdr_len(ap) (arphdr_len2((ap)->ar_hln, (ap)->ar_pln))
/*
* ARP ioctl request
*/
struct arpreq {
struct sockaddr arp_pa; /* protocol address */
struct sockaddr arp_ha; /* hardware address */
int arp_flags; /* flags */
};
/* arp_flags and at_flags field values */
#define ATF_INUSE 0x01 /* entry in use */
#define ATF_COM 0x02 /* completed entry (enaddr valid) */
#define ATF_PERM 0x04 /* permanent entry */
#define ATF_PUBL 0x08 /* publish entry (respond for other host) */
#define ATF_USETRAILERS 0x10 /* has requested trailers */
#ifdef _KERNEL
/*
* Structure shared between the ethernet driver modules and
* the address resolution code. For example, each ec_softc or il_softc
* begins with this structure.
* The code is written so that each *_softc _must_ begin with a
* struct arpcom, which in turn _must_ begin with a struct ifnet.
*/
struct arpcom {
/*
* The ifnet struct _must_ be at the head of this structure.
*/
struct ifnet ac_if; /* network-visible interface */
u_char ac_enaddr[6]; /* ethernet hardware address */
int now_unused; /* XXX was length of ac_multiaddrs list */
void *ac_netgraph; /* ng_ether(4) netgraph node info */
};
#define IFP2AC(ifp) ((struct arpcom *)(ifp))
#endif
#endif /* !_NET_IF_ARP_H_ */