mirror of
https://git.FreeBSD.org/src.git
synced 2024-12-20 11:11:24 +00:00
637068b1d3
buffer space instead of a u_int32_t. Otherwise the upper 32 bits of the address space get truncated and syscons blows up. Approved by: re (safe, low risk amd64 fixes)
3061 lines
80 KiB
C
3061 lines
80 KiB
C
/*-
|
|
* Copyright (c) 1999 Kazutaka YOKOTA <yokota@zodiac.mech.utsunomiya-u.ac.jp>
|
|
* Copyright (c) 1992-1998 Søren Schmidt
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer as
|
|
* the first lines of this file unmodified.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHORS ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
#include "opt_vga.h"
|
|
#include "opt_fb.h"
|
|
#include "opt_syscons.h" /* should be removed in the future, XXX */
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/conf.h>
|
|
#include <sys/fcntl.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/fbio.h>
|
|
|
|
#include <vm/vm.h>
|
|
#include <vm/vm_param.h>
|
|
#include <vm/pmap.h>
|
|
|
|
#include <machine/md_var.h>
|
|
#ifdef __i386__
|
|
#include <machine/pc/bios.h>
|
|
#endif
|
|
#include <machine/bus.h>
|
|
|
|
#include <dev/fb/fbreg.h>
|
|
#include <dev/fb/vgareg.h>
|
|
|
|
#include <isa/isareg.h>
|
|
|
|
#ifndef VGA_DEBUG
|
|
#define VGA_DEBUG 0
|
|
#endif
|
|
|
|
/* XXX machine/pc/bios.h has got too much i386-specific stuff in it */
|
|
#ifndef BIOS_PADDRTOVADDR
|
|
#if !defined(__amd64__)
|
|
#define BIOS_PADDRTOVADDR(x) (x)
|
|
#else
|
|
#define BIOS_PADDRTOVADDR(x) (((x) - ISA_HOLE_START) + atdevbase)
|
|
#endif
|
|
#endif
|
|
|
|
int
|
|
vga_probe_unit(int unit, video_adapter_t *buf, int flags)
|
|
{
|
|
video_adapter_t *adp;
|
|
video_switch_t *sw;
|
|
int error;
|
|
|
|
sw = vid_get_switch(VGA_DRIVER_NAME);
|
|
if (sw == NULL)
|
|
return 0;
|
|
error = (*sw->probe)(unit, &adp, NULL, flags);
|
|
if (error)
|
|
return error;
|
|
bcopy(adp, buf, sizeof(*buf));
|
|
return 0;
|
|
}
|
|
|
|
int
|
|
vga_attach_unit(int unit, vga_softc_t *sc, int flags)
|
|
{
|
|
video_switch_t *sw;
|
|
int error;
|
|
|
|
sw = vid_get_switch(VGA_DRIVER_NAME);
|
|
if (sw == NULL)
|
|
return ENXIO;
|
|
|
|
error = (*sw->probe)(unit, &sc->adp, NULL, flags);
|
|
if (error)
|
|
return error;
|
|
return (*sw->init)(unit, sc->adp, flags);
|
|
}
|
|
|
|
/* cdev driver functions */
|
|
|
|
#ifdef FB_INSTALL_CDEV
|
|
|
|
int
|
|
vga_open(dev_t dev, vga_softc_t *sc, int flag, int mode, struct thread *td)
|
|
{
|
|
if (sc == NULL)
|
|
return ENXIO;
|
|
if (mode & (O_CREAT | O_APPEND | O_TRUNC))
|
|
return ENODEV;
|
|
|
|
return genfbopen(&sc->gensc, sc->adp, flag, mode, td);
|
|
}
|
|
|
|
int
|
|
vga_close(dev_t dev, vga_softc_t *sc, int flag, int mode, struct thread *td)
|
|
{
|
|
return genfbclose(&sc->gensc, sc->adp, flag, mode, td);
|
|
}
|
|
|
|
int
|
|
vga_read(dev_t dev, vga_softc_t *sc, struct uio *uio, int flag)
|
|
{
|
|
return genfbread(&sc->gensc, sc->adp, uio, flag);
|
|
}
|
|
|
|
int
|
|
vga_write(dev_t dev, vga_softc_t *sc, struct uio *uio, int flag)
|
|
{
|
|
return genfbread(&sc->gensc, sc->adp, uio, flag);
|
|
}
|
|
|
|
int
|
|
vga_ioctl(dev_t dev, vga_softc_t *sc, u_long cmd, caddr_t arg, int flag,
|
|
struct thread *td)
|
|
{
|
|
return genfbioctl(&sc->gensc, sc->adp, cmd, arg, flag, td);
|
|
}
|
|
|
|
int
|
|
vga_mmap(dev_t dev, vga_softc_t *sc, vm_offset_t offset, vm_offset_t *paddr,
|
|
int prot)
|
|
{
|
|
return genfbmmap(&sc->gensc, sc->adp, offset, paddr, prot);
|
|
}
|
|
|
|
#endif /* FB_INSTALL_CDEV */
|
|
|
|
/* LOW-LEVEL */
|
|
|
|
#include <machine/clock.h>
|
|
#ifdef __i386__
|
|
#include <machine/pc/vesa.h>
|
|
#endif
|
|
|
|
#define probe_done(adp) ((adp)->va_flags & V_ADP_PROBED)
|
|
#define init_done(adp) ((adp)->va_flags & V_ADP_INITIALIZED)
|
|
#define config_done(adp) ((adp)->va_flags & V_ADP_REGISTERED)
|
|
|
|
/* for compatibility with old kernel options */
|
|
#ifdef SC_ALT_SEQACCESS
|
|
#undef SC_ALT_SEQACCESS
|
|
#undef VGA_ALT_SEQACCESS
|
|
#define VGA_ALT_SEQACCESS 1
|
|
#endif
|
|
|
|
#ifdef SLOW_VGA
|
|
#undef SLOW_VGA
|
|
#undef VGA_SLOW_IOACCESS
|
|
#define VGA_SLOW_IOACCESS 1
|
|
#endif
|
|
|
|
/* architecture dependent option */
|
|
#ifndef __i386__
|
|
#define VGA_NO_BIOS 1
|
|
#endif
|
|
|
|
/* this should really be in `rtc.h' */
|
|
#define RTC_EQUIPMENT 0x14
|
|
|
|
/* various sizes */
|
|
#define V_MODE_MAP_SIZE (M_VGA_CG320 + 1)
|
|
#define V_MODE_PARAM_SIZE 64
|
|
|
|
/* video adapter state buffer */
|
|
struct adp_state {
|
|
int sig;
|
|
#define V_STATE_SIG 0x736f6962
|
|
u_char regs[V_MODE_PARAM_SIZE];
|
|
};
|
|
typedef struct adp_state adp_state_t;
|
|
|
|
/* video adapter information */
|
|
#define DCC_MONO 0
|
|
#define DCC_CGA40 1
|
|
#define DCC_CGA80 2
|
|
#define DCC_EGAMONO 3
|
|
#define DCC_EGA40 4
|
|
#define DCC_EGA80 5
|
|
|
|
/*
|
|
* NOTE: `va_window' should have a virtual address, but is initialized
|
|
* with a physical address in the following table, as verify_adapter()
|
|
* will perform address conversion at run-time.
|
|
*/
|
|
static video_adapter_t adapter_init_value[] = {
|
|
/* DCC_MONO */
|
|
{ 0, KD_MONO, "mda", 0, 0, 0, IO_MDA, IO_MDASIZE, MONO_CRTC,
|
|
MDA_BUF_BASE, MDA_BUF_SIZE, MDA_BUF_BASE, MDA_BUF_SIZE, MDA_BUF_SIZE,
|
|
0, 0, 0, 0, 7, 0, },
|
|
/* DCC_CGA40 */
|
|
{ 0, KD_CGA, "cga", 0, 0, V_ADP_COLOR, IO_CGA, IO_CGASIZE, COLOR_CRTC,
|
|
CGA_BUF_BASE, CGA_BUF_SIZE, CGA_BUF_BASE, CGA_BUF_SIZE, CGA_BUF_SIZE,
|
|
0, 0, 0, 0, 3, 0, },
|
|
/* DCC_CGA80 */
|
|
{ 0, KD_CGA, "cga", 0, 0, V_ADP_COLOR, IO_CGA, IO_CGASIZE, COLOR_CRTC,
|
|
CGA_BUF_BASE, CGA_BUF_SIZE, CGA_BUF_BASE, CGA_BUF_SIZE, CGA_BUF_SIZE,
|
|
0, 0, 0, 0, 3, 0, },
|
|
/* DCC_EGAMONO */
|
|
{ 0, KD_EGA, "ega", 0, 0, 0, IO_MDA, 48, MONO_CRTC,
|
|
EGA_BUF_BASE, EGA_BUF_SIZE, MDA_BUF_BASE, MDA_BUF_SIZE, MDA_BUF_SIZE,
|
|
0, 0, 0, 0, 7, 0, },
|
|
/* DCC_EGA40 */
|
|
{ 0, KD_EGA, "ega", 0, 0, V_ADP_COLOR, IO_MDA, 48, COLOR_CRTC,
|
|
EGA_BUF_BASE, EGA_BUF_SIZE, CGA_BUF_BASE, CGA_BUF_SIZE, CGA_BUF_SIZE,
|
|
0, 0, 0, 0, 3, 0, },
|
|
/* DCC_EGA80 */
|
|
{ 0, KD_EGA, "ega", 0, 0, V_ADP_COLOR, IO_MDA, 48, COLOR_CRTC,
|
|
EGA_BUF_BASE, EGA_BUF_SIZE, CGA_BUF_BASE, CGA_BUF_SIZE, CGA_BUF_SIZE,
|
|
0, 0, 0, 0, 3, 0, },
|
|
};
|
|
|
|
static video_adapter_t biosadapter[2];
|
|
static int biosadapters = 0;
|
|
|
|
/* video driver declarations */
|
|
static int vga_configure(int flags);
|
|
int (*vga_sub_configure)(int flags);
|
|
#if 0
|
|
static int vga_nop(void);
|
|
#endif
|
|
static int vga_error(void);
|
|
static vi_probe_t vga_probe;
|
|
static vi_init_t vga_init;
|
|
static vi_get_info_t vga_get_info;
|
|
static vi_query_mode_t vga_query_mode;
|
|
static vi_set_mode_t vga_set_mode;
|
|
static vi_save_font_t vga_save_font;
|
|
static vi_load_font_t vga_load_font;
|
|
static vi_show_font_t vga_show_font;
|
|
static vi_save_palette_t vga_save_palette;
|
|
static vi_load_palette_t vga_load_palette;
|
|
static vi_set_border_t vga_set_border;
|
|
static vi_save_state_t vga_save_state;
|
|
static vi_load_state_t vga_load_state;
|
|
static vi_set_win_org_t vga_set_origin;
|
|
static vi_read_hw_cursor_t vga_read_hw_cursor;
|
|
static vi_set_hw_cursor_t vga_set_hw_cursor;
|
|
static vi_set_hw_cursor_shape_t vga_set_hw_cursor_shape;
|
|
static vi_blank_display_t vga_blank_display;
|
|
static vi_mmap_t vga_mmap_buf;
|
|
static vi_ioctl_t vga_dev_ioctl;
|
|
#ifndef VGA_NO_MODE_CHANGE
|
|
static vi_clear_t vga_clear;
|
|
static vi_fill_rect_t vga_fill_rect;
|
|
static vi_bitblt_t vga_bitblt;
|
|
#else /* VGA_NO_MODE_CHANGE */
|
|
#define vga_clear (vi_clear_t *)vga_error
|
|
#define vga_fill_rect (vi_fill_rect_t *)vga_error
|
|
#define vga_bitblt (vi_bitblt_t *)vga_error
|
|
#endif
|
|
static vi_diag_t vga_diag;
|
|
|
|
static video_switch_t vgavidsw = {
|
|
vga_probe,
|
|
vga_init,
|
|
vga_get_info,
|
|
vga_query_mode,
|
|
vga_set_mode,
|
|
vga_save_font,
|
|
vga_load_font,
|
|
vga_show_font,
|
|
vga_save_palette,
|
|
vga_load_palette,
|
|
vga_set_border,
|
|
vga_save_state,
|
|
vga_load_state,
|
|
vga_set_origin,
|
|
vga_read_hw_cursor,
|
|
vga_set_hw_cursor,
|
|
vga_set_hw_cursor_shape,
|
|
vga_blank_display,
|
|
vga_mmap_buf,
|
|
vga_dev_ioctl,
|
|
vga_clear,
|
|
vga_fill_rect,
|
|
vga_bitblt,
|
|
vga_error,
|
|
vga_error,
|
|
vga_diag,
|
|
};
|
|
|
|
VIDEO_DRIVER(mda, vgavidsw, NULL);
|
|
VIDEO_DRIVER(cga, vgavidsw, NULL);
|
|
VIDEO_DRIVER(ega, vgavidsw, NULL);
|
|
VIDEO_DRIVER(vga, vgavidsw, vga_configure);
|
|
|
|
/* VGA BIOS standard video modes */
|
|
#define EOT (-1)
|
|
#define NA (-2)
|
|
|
|
static video_info_t bios_vmode[] = {
|
|
/* CGA */
|
|
{ M_B40x25, V_INFO_COLOR, 40, 25, 8, 8, 2, 1,
|
|
CGA_BUF_BASE, CGA_BUF_SIZE, CGA_BUF_SIZE, 0, 0, V_INFO_MM_TEXT },
|
|
{ M_C40x25, V_INFO_COLOR, 40, 25, 8, 8, 4, 1,
|
|
CGA_BUF_BASE, CGA_BUF_SIZE, CGA_BUF_SIZE, 0, 0, V_INFO_MM_TEXT },
|
|
{ M_B80x25, V_INFO_COLOR, 80, 25, 8, 8, 2, 1,
|
|
CGA_BUF_BASE, CGA_BUF_SIZE, CGA_BUF_SIZE, 0, 0, V_INFO_MM_TEXT },
|
|
{ M_C80x25, V_INFO_COLOR, 80, 25, 8, 8, 4, 1,
|
|
CGA_BUF_BASE, CGA_BUF_SIZE, CGA_BUF_SIZE, 0, 0, V_INFO_MM_TEXT },
|
|
/* EGA */
|
|
{ M_ENH_B40x25, V_INFO_COLOR, 40, 25, 8, 14, 2, 1,
|
|
CGA_BUF_BASE, CGA_BUF_SIZE, CGA_BUF_SIZE, 0, 0, V_INFO_MM_TEXT },
|
|
{ M_ENH_C40x25, V_INFO_COLOR, 40, 25, 8, 14, 4, 1,
|
|
CGA_BUF_BASE, CGA_BUF_SIZE, CGA_BUF_SIZE, 0, 0, V_INFO_MM_TEXT },
|
|
{ M_ENH_B80x25, V_INFO_COLOR, 80, 25, 8, 14, 2, 1,
|
|
CGA_BUF_BASE, CGA_BUF_SIZE, CGA_BUF_SIZE, 0, 0, V_INFO_MM_TEXT },
|
|
{ M_ENH_C80x25, V_INFO_COLOR, 80, 25, 8, 14, 4, 1,
|
|
CGA_BUF_BASE, CGA_BUF_SIZE, CGA_BUF_SIZE, 0, 0, V_INFO_MM_TEXT },
|
|
/* VGA */
|
|
{ M_VGA_C40x25, V_INFO_COLOR, 40, 25, 8, 16, 4, 1,
|
|
CGA_BUF_BASE, CGA_BUF_SIZE, CGA_BUF_SIZE, 0, 0, V_INFO_MM_TEXT },
|
|
{ M_VGA_M80x25, 0, 80, 25, 8, 16, 2, 1,
|
|
MDA_BUF_BASE, MDA_BUF_SIZE, MDA_BUF_SIZE, 0, 0, V_INFO_MM_TEXT },
|
|
{ M_VGA_C80x25, V_INFO_COLOR, 80, 25, 8, 16, 4, 1,
|
|
CGA_BUF_BASE, CGA_BUF_SIZE, CGA_BUF_SIZE, 0, 0, V_INFO_MM_TEXT },
|
|
/* MDA */
|
|
{ M_EGAMONO80x25, 0, 80, 25, 8, 14, 2, 1,
|
|
MDA_BUF_BASE, MDA_BUF_SIZE, MDA_BUF_SIZE, 0, 0, V_INFO_MM_TEXT },
|
|
/* EGA */
|
|
{ M_ENH_B80x43, 0, 80, 43, 8, 8, 2, 1,
|
|
CGA_BUF_BASE, CGA_BUF_SIZE, CGA_BUF_SIZE, 0, 0, V_INFO_MM_TEXT },
|
|
{ M_ENH_C80x43, V_INFO_COLOR, 80, 43, 8, 8, 4, 1,
|
|
CGA_BUF_BASE, CGA_BUF_SIZE, CGA_BUF_SIZE, 0, 0, V_INFO_MM_TEXT },
|
|
/* VGA */
|
|
{ M_VGA_M80x30, 0, 80, 30, 8, 16, 2, 1,
|
|
MDA_BUF_BASE, MDA_BUF_SIZE, MDA_BUF_SIZE, 0, 0, V_INFO_MM_TEXT },
|
|
{ M_VGA_C80x30, V_INFO_COLOR, 80, 30, 8, 16, 4, 1,
|
|
CGA_BUF_BASE, CGA_BUF_SIZE, CGA_BUF_SIZE, 0, 0, V_INFO_MM_TEXT },
|
|
{ M_VGA_M80x50, 0, 80, 50, 8, 8, 2, 1,
|
|
MDA_BUF_BASE, MDA_BUF_SIZE, MDA_BUF_SIZE, 0, 0, V_INFO_MM_TEXT },
|
|
{ M_VGA_C80x50, V_INFO_COLOR, 80, 50, 8, 8, 4, 1,
|
|
CGA_BUF_BASE, CGA_BUF_SIZE, CGA_BUF_SIZE, 0, 0, V_INFO_MM_TEXT },
|
|
{ M_VGA_M80x60, 0, 80, 60, 8, 8, 2, 1,
|
|
MDA_BUF_BASE, MDA_BUF_SIZE, MDA_BUF_SIZE, 0, 0, V_INFO_MM_TEXT },
|
|
{ M_VGA_C80x60, V_INFO_COLOR, 80, 60, 8, 8, 4, 1,
|
|
CGA_BUF_BASE, CGA_BUF_SIZE, CGA_BUF_SIZE, 0, 0, V_INFO_MM_TEXT },
|
|
|
|
#ifndef VGA_NO_MODE_CHANGE
|
|
|
|
#ifdef VGA_WIDTH90
|
|
{ M_VGA_M90x25, 0, 90, 25, 8, 16, 2, 1,
|
|
MDA_BUF_BASE, MDA_BUF_SIZE, MDA_BUF_SIZE, 0, 0, V_INFO_MM_TEXT },
|
|
{ M_VGA_C90x25, V_INFO_COLOR, 90, 25, 8, 16, 4, 1,
|
|
CGA_BUF_BASE, CGA_BUF_SIZE, CGA_BUF_SIZE, 0, 0, V_INFO_MM_TEXT },
|
|
{ M_VGA_M90x30, 0, 90, 30, 8, 16, 2, 1,
|
|
MDA_BUF_BASE, MDA_BUF_SIZE, MDA_BUF_SIZE, 0, 0, V_INFO_MM_TEXT },
|
|
{ M_VGA_C90x30, V_INFO_COLOR, 90, 30, 8, 16, 4, 1,
|
|
CGA_BUF_BASE, CGA_BUF_SIZE, CGA_BUF_SIZE, 0, 0, V_INFO_MM_TEXT },
|
|
{ M_VGA_M90x43, 0, 90, 43, 8, 8, 2, 1,
|
|
CGA_BUF_BASE, CGA_BUF_SIZE, CGA_BUF_SIZE, 0, 0, V_INFO_MM_TEXT },
|
|
{ M_VGA_C90x43, V_INFO_COLOR, 90, 43, 8, 8, 4, 1,
|
|
CGA_BUF_BASE, CGA_BUF_SIZE, CGA_BUF_SIZE, 0, 0, V_INFO_MM_TEXT },
|
|
{ M_VGA_M90x50, 0, 90, 50, 8, 8, 2, 1,
|
|
MDA_BUF_BASE, MDA_BUF_SIZE, MDA_BUF_SIZE, 0, 0, V_INFO_MM_TEXT },
|
|
{ M_VGA_C90x50, V_INFO_COLOR, 90, 50, 8, 8, 4, 1,
|
|
CGA_BUF_BASE, CGA_BUF_SIZE, CGA_BUF_SIZE, 0, 0, V_INFO_MM_TEXT },
|
|
{ M_VGA_M90x60, 0, 90, 60, 8, 8, 2, 1,
|
|
MDA_BUF_BASE, MDA_BUF_SIZE, MDA_BUF_SIZE, 0, 0, V_INFO_MM_TEXT },
|
|
{ M_VGA_C90x60, V_INFO_COLOR, 90, 60, 8, 8, 4, 1,
|
|
CGA_BUF_BASE, CGA_BUF_SIZE, CGA_BUF_SIZE, 0, 0, V_INFO_MM_TEXT },
|
|
#endif /* VGA_WIDTH90 */
|
|
|
|
/* CGA */
|
|
{ M_BG320, V_INFO_COLOR | V_INFO_GRAPHICS, 320, 200, 8, 8, 2, 1,
|
|
CGA_BUF_BASE, CGA_BUF_SIZE, CGA_BUF_SIZE, 0, 0, V_INFO_MM_CGA },
|
|
{ M_CG320, V_INFO_COLOR | V_INFO_GRAPHICS, 320, 200, 8, 8, 2, 1,
|
|
CGA_BUF_BASE, CGA_BUF_SIZE, CGA_BUF_SIZE, 0, 0, V_INFO_MM_CGA },
|
|
{ M_BG640, V_INFO_COLOR | V_INFO_GRAPHICS, 640, 200, 8, 8, 1, 1,
|
|
CGA_BUF_BASE, CGA_BUF_SIZE, CGA_BUF_SIZE, 0, 0, V_INFO_MM_CGA },
|
|
/* EGA */
|
|
{ M_CG320_D, V_INFO_COLOR | V_INFO_GRAPHICS, 320, 200, 8, 8, 4, 4,
|
|
GRAPHICS_BUF_BASE, GRAPHICS_BUF_SIZE, GRAPHICS_BUF_SIZE, 0, 0,
|
|
V_INFO_MM_PLANAR },
|
|
{ M_CG640_E, V_INFO_COLOR | V_INFO_GRAPHICS, 640, 200, 8, 8, 4, 4,
|
|
GRAPHICS_BUF_BASE, GRAPHICS_BUF_SIZE, GRAPHICS_BUF_SIZE, 0, 0 ,
|
|
V_INFO_MM_PLANAR },
|
|
{ M_EGAMONOAPA, V_INFO_GRAPHICS, 640, 350, 8, 14, 4, 4,
|
|
GRAPHICS_BUF_BASE, GRAPHICS_BUF_SIZE, 64*1024, 0, 0 ,
|
|
V_INFO_MM_PLANAR },
|
|
{ M_ENHMONOAPA2,V_INFO_GRAPHICS, 640, 350, 8, 14, 4, 4,
|
|
GRAPHICS_BUF_BASE, GRAPHICS_BUF_SIZE, GRAPHICS_BUF_SIZE, 0, 0 ,
|
|
V_INFO_MM_PLANAR },
|
|
{ M_CG640x350, V_INFO_COLOR | V_INFO_GRAPHICS, 640, 350, 8, 14, 2, 2,
|
|
GRAPHICS_BUF_BASE, GRAPHICS_BUF_SIZE, GRAPHICS_BUF_SIZE, 0, 0 ,
|
|
V_INFO_MM_PLANAR },
|
|
{ M_ENH_CG640, V_INFO_COLOR | V_INFO_GRAPHICS, 640, 350, 8, 14, 4, 4,
|
|
GRAPHICS_BUF_BASE, GRAPHICS_BUF_SIZE, GRAPHICS_BUF_SIZE, 0, 0 ,
|
|
V_INFO_MM_PLANAR },
|
|
/* VGA */
|
|
{ M_BG640x480, V_INFO_COLOR | V_INFO_GRAPHICS, 640, 480, 8, 16, 4, 4,
|
|
GRAPHICS_BUF_BASE, GRAPHICS_BUF_SIZE, GRAPHICS_BUF_SIZE, 0, 0 ,
|
|
V_INFO_MM_PLANAR },
|
|
{ M_CG640x480, V_INFO_COLOR | V_INFO_GRAPHICS, 640, 480, 8, 16, 4, 4,
|
|
GRAPHICS_BUF_BASE, GRAPHICS_BUF_SIZE, GRAPHICS_BUF_SIZE, 0, 0 ,
|
|
V_INFO_MM_PLANAR },
|
|
{ M_VGA_CG320, V_INFO_COLOR | V_INFO_GRAPHICS, 320, 200, 8, 8, 8, 1,
|
|
GRAPHICS_BUF_BASE, GRAPHICS_BUF_SIZE, GRAPHICS_BUF_SIZE, 0, 0,
|
|
V_INFO_MM_PACKED, 1 },
|
|
{ M_VGA_MODEX, V_INFO_COLOR | V_INFO_GRAPHICS, 320, 240, 8, 8, 8, 4,
|
|
GRAPHICS_BUF_BASE, GRAPHICS_BUF_SIZE, GRAPHICS_BUF_SIZE, 0, 0,
|
|
V_INFO_MM_VGAX, 1 },
|
|
#endif /* VGA_NO_MODE_CHANGE */
|
|
|
|
{ EOT },
|
|
};
|
|
|
|
static int vga_init_done = FALSE;
|
|
#if !defined(VGA_NO_BIOS) && !defined(VGA_NO_MODE_CHANGE)
|
|
static u_char *video_mode_ptr = NULL; /* EGA/VGA */
|
|
static u_char *video_mode_ptr2 = NULL; /* CGA/MDA */
|
|
#endif
|
|
static u_char *mode_map[V_MODE_MAP_SIZE];
|
|
static adp_state_t adpstate;
|
|
static adp_state_t adpstate2;
|
|
static int rows_offset = 1;
|
|
|
|
/* local macros and functions */
|
|
#define BIOS_SADDRTOLADDR(p) ((((p) & 0xffff0000) >> 12) + ((p) & 0x0000ffff))
|
|
|
|
#if !defined(VGA_NO_BIOS) && !defined(VGA_NO_MODE_CHANGE)
|
|
static void map_mode_table(u_char *map[], u_char *table, int max);
|
|
#endif
|
|
static void clear_mode_map(video_adapter_t *adp, u_char *map[], int max,
|
|
int color);
|
|
#if !defined(VGA_NO_BIOS) && !defined(VGA_NO_MODE_CHANGE)
|
|
static int map_mode_num(int mode);
|
|
#endif
|
|
static int map_gen_mode_num(int type, int color, int mode);
|
|
static int map_bios_mode_num(int type, int color, int bios_mode);
|
|
static u_char *get_mode_param(int mode);
|
|
#ifndef VGA_NO_BIOS
|
|
static void fill_adapter_param(int code, video_adapter_t *adp);
|
|
#endif
|
|
static int verify_adapter(video_adapter_t *adp);
|
|
static void update_adapter_info(video_adapter_t *adp, video_info_t *info);
|
|
#if !defined(VGA_NO_BIOS) && !defined(VGA_NO_MODE_CHANGE)
|
|
#define COMP_IDENTICAL 0
|
|
#define COMP_SIMILAR 1
|
|
#define COMP_DIFFERENT 2
|
|
static int comp_adpregs(u_char *buf1, u_char *buf2);
|
|
#endif
|
|
static int probe_adapters(void);
|
|
static int set_line_length(video_adapter_t *adp, int pixel);
|
|
static int set_display_start(video_adapter_t *adp, int x, int y);
|
|
static void filll_io(int val, vm_offset_t d, size_t size);
|
|
|
|
#ifndef VGA_NO_MODE_CHANGE
|
|
#ifdef VGA_WIDTH90
|
|
static void set_width90(adp_state_t *params);
|
|
#endif
|
|
#endif /* !VGA_NO_MODE_CHANGE */
|
|
|
|
#ifndef VGA_NO_FONT_LOADING
|
|
#define PARAM_BUFSIZE 6
|
|
static void set_font_mode(video_adapter_t *adp, u_char *buf);
|
|
static void set_normal_mode(video_adapter_t *adp, u_char *buf);
|
|
#endif
|
|
|
|
#ifndef VGA_NO_MODE_CHANGE
|
|
static void planar_fill(video_adapter_t *adp, int val);
|
|
static void packed_fill(video_adapter_t *adp, int val);
|
|
static void direct_fill(video_adapter_t *adp, int val);
|
|
#ifdef notyet
|
|
static void planar_fill_rect(video_adapter_t *adp, int val, int x, int y,
|
|
int cx, int cy);
|
|
static void packed_fill_rect(video_adapter_t *adp, int val, int x, int y,
|
|
int cx, int cy);
|
|
static void direct_fill_rect16(video_adapter_t *adp, int val, int x, int y,
|
|
int cx, int cy);
|
|
static void direct_fill_rect24(video_adapter_t *adp, int val, int x, int y,
|
|
int cx, int cy);
|
|
static void direct_fill_rect32(video_adapter_t *adp, int val, int x, int y,
|
|
int cx, int cy);
|
|
#endif /* notyet */
|
|
#endif /* !VGA_NO_MODE_CHANGE */
|
|
|
|
static void dump_buffer(u_char *buf, size_t len);
|
|
|
|
#define ISMAPPED(pa, width) \
|
|
(((pa) <= (u_long)0x1000 - (width)) \
|
|
|| ((pa) >= ISA_HOLE_START && (pa) <= 0x100000 - (width)))
|
|
|
|
#define prologue(adp, flag, err) \
|
|
if (!vga_init_done || !((adp)->va_flags & (flag))) \
|
|
return (err)
|
|
|
|
/* a backdoor for the console driver */
|
|
static int
|
|
vga_configure(int flags)
|
|
{
|
|
int i;
|
|
|
|
probe_adapters();
|
|
for (i = 0; i < biosadapters; ++i) {
|
|
if (!probe_done(&biosadapter[i]))
|
|
continue;
|
|
biosadapter[i].va_flags |= V_ADP_INITIALIZED;
|
|
if (!config_done(&biosadapter[i])) {
|
|
if (vid_register(&biosadapter[i]) < 0)
|
|
continue;
|
|
biosadapter[i].va_flags |= V_ADP_REGISTERED;
|
|
}
|
|
}
|
|
if (vga_sub_configure != NULL)
|
|
(*vga_sub_configure)(flags);
|
|
|
|
return biosadapters;
|
|
}
|
|
|
|
/* local subroutines */
|
|
|
|
#if !defined(VGA_NO_BIOS) && !defined(VGA_NO_MODE_CHANGE)
|
|
/* construct the mode parameter map */
|
|
static void
|
|
map_mode_table(u_char *map[], u_char *table, int max)
|
|
{
|
|
int i;
|
|
|
|
for(i = 0; i < max; ++i)
|
|
map[i] = table + i*V_MODE_PARAM_SIZE;
|
|
for(; i < V_MODE_MAP_SIZE; ++i)
|
|
map[i] = NULL;
|
|
}
|
|
#endif /* !VGA_NO_BIOS && !VGA_NO_MODE_CHANGE */
|
|
|
|
static void
|
|
clear_mode_map(video_adapter_t *adp, u_char *map[], int max, int color)
|
|
{
|
|
video_info_t info;
|
|
int i;
|
|
|
|
/*
|
|
* NOTE: we don't touch `bios_vmode[]' because it is shared
|
|
* by all adapters.
|
|
*/
|
|
for(i = 0; i < max; ++i) {
|
|
if (vga_get_info(adp, i, &info))
|
|
continue;
|
|
if ((info.vi_flags & V_INFO_COLOR) != color)
|
|
map[i] = NULL;
|
|
}
|
|
}
|
|
|
|
#if !defined(VGA_NO_BIOS) && !defined(VGA_NO_MODE_CHANGE)
|
|
/* map the non-standard video mode to a known mode number */
|
|
static int
|
|
map_mode_num(int mode)
|
|
{
|
|
static struct {
|
|
int from;
|
|
int to;
|
|
} mode_map[] = {
|
|
{ M_ENH_B80x43, M_ENH_B80x25 },
|
|
{ M_ENH_C80x43, M_ENH_C80x25 },
|
|
{ M_VGA_M80x30, M_VGA_M80x25 },
|
|
{ M_VGA_C80x30, M_VGA_C80x25 },
|
|
{ M_VGA_M80x50, M_VGA_M80x25 },
|
|
{ M_VGA_C80x50, M_VGA_C80x25 },
|
|
{ M_VGA_M80x60, M_VGA_M80x25 },
|
|
{ M_VGA_C80x60, M_VGA_C80x25 },
|
|
#ifdef VGA_WIDTH90
|
|
{ M_VGA_M90x25, M_VGA_M80x25 },
|
|
{ M_VGA_C90x25, M_VGA_C80x25 },
|
|
{ M_VGA_M90x30, M_VGA_M80x25 },
|
|
{ M_VGA_C90x30, M_VGA_C80x25 },
|
|
{ M_VGA_M90x43, M_ENH_B80x25 },
|
|
{ M_VGA_C90x43, M_ENH_C80x25 },
|
|
{ M_VGA_M90x50, M_VGA_M80x25 },
|
|
{ M_VGA_C90x50, M_VGA_C80x25 },
|
|
{ M_VGA_M90x60, M_VGA_M80x25 },
|
|
{ M_VGA_C90x60, M_VGA_C80x25 },
|
|
#endif
|
|
{ M_VGA_MODEX, M_VGA_CG320 },
|
|
};
|
|
int i;
|
|
|
|
for (i = 0; i < sizeof(mode_map)/sizeof(mode_map[0]); ++i) {
|
|
if (mode_map[i].from == mode)
|
|
return mode_map[i].to;
|
|
}
|
|
return mode;
|
|
}
|
|
#endif /* !VGA_NO_BIOS && !VGA_NO_MODE_CHANGE */
|
|
|
|
/* map a generic video mode to a known mode number */
|
|
static int
|
|
map_gen_mode_num(int type, int color, int mode)
|
|
{
|
|
static struct {
|
|
int from;
|
|
int to_color;
|
|
int to_mono;
|
|
} mode_map[] = {
|
|
{ M_TEXT_80x30, M_VGA_C80x30, M_VGA_M80x30, },
|
|
{ M_TEXT_80x43, M_ENH_C80x43, M_ENH_B80x43, },
|
|
{ M_TEXT_80x50, M_VGA_C80x50, M_VGA_M80x50, },
|
|
{ M_TEXT_80x60, M_VGA_C80x60, M_VGA_M80x60, },
|
|
};
|
|
int i;
|
|
|
|
if (mode == M_TEXT_80x25) {
|
|
switch (type) {
|
|
|
|
case KD_VGA:
|
|
if (color)
|
|
return M_VGA_C80x25;
|
|
else
|
|
return M_VGA_M80x25;
|
|
break;
|
|
|
|
case KD_EGA:
|
|
if (color)
|
|
return M_ENH_C80x25;
|
|
else
|
|
return M_EGAMONO80x25;
|
|
break;
|
|
|
|
case KD_CGA:
|
|
return M_C80x25;
|
|
|
|
case KD_MONO:
|
|
case KD_HERCULES:
|
|
return M_EGAMONO80x25; /* XXX: this name is confusing */
|
|
|
|
default:
|
|
return -1;
|
|
}
|
|
}
|
|
|
|
for (i = 0; i < sizeof(mode_map)/sizeof(mode_map[0]); ++i) {
|
|
if (mode_map[i].from == mode)
|
|
return ((color) ? mode_map[i].to_color : mode_map[i].to_mono);
|
|
}
|
|
return mode;
|
|
}
|
|
|
|
/* turn the BIOS video number into our video mode number */
|
|
static int
|
|
map_bios_mode_num(int type, int color, int bios_mode)
|
|
{
|
|
static int cga_modes[7] = {
|
|
M_B40x25, M_C40x25, /* 0, 1 */
|
|
M_B80x25, M_C80x25, /* 2, 3 */
|
|
M_BG320, M_CG320,
|
|
M_BG640,
|
|
};
|
|
static int ega_modes[17] = {
|
|
M_ENH_B40x25, M_ENH_C40x25, /* 0, 1 */
|
|
M_ENH_B80x25, M_ENH_C80x25, /* 2, 3 */
|
|
M_BG320, M_CG320,
|
|
M_BG640,
|
|
M_EGAMONO80x25, /* 7 */
|
|
8, 9, 10, 11, 12,
|
|
M_CG320_D,
|
|
M_CG640_E,
|
|
M_ENHMONOAPA2, /* XXX: video momery > 64K */
|
|
M_ENH_CG640, /* XXX: video momery > 64K */
|
|
};
|
|
static int vga_modes[20] = {
|
|
M_VGA_C40x25, M_VGA_C40x25, /* 0, 1 */
|
|
M_VGA_C80x25, M_VGA_C80x25, /* 2, 3 */
|
|
M_BG320, M_CG320,
|
|
M_BG640,
|
|
M_VGA_M80x25, /* 7 */
|
|
8, 9, 10, 11, 12,
|
|
M_CG320_D,
|
|
M_CG640_E,
|
|
M_ENHMONOAPA2,
|
|
M_ENH_CG640,
|
|
M_BG640x480, M_CG640x480,
|
|
M_VGA_CG320,
|
|
};
|
|
|
|
switch (type) {
|
|
|
|
case KD_VGA:
|
|
if (bios_mode < sizeof(vga_modes)/sizeof(vga_modes[0]))
|
|
return vga_modes[bios_mode];
|
|
else if (color)
|
|
return M_VGA_C80x25;
|
|
else
|
|
return M_VGA_M80x25;
|
|
break;
|
|
|
|
case KD_EGA:
|
|
if (bios_mode < sizeof(ega_modes)/sizeof(ega_modes[0]))
|
|
return ega_modes[bios_mode];
|
|
else if (color)
|
|
return M_ENH_C80x25;
|
|
else
|
|
return M_EGAMONO80x25;
|
|
break;
|
|
|
|
case KD_CGA:
|
|
if (bios_mode < sizeof(cga_modes)/sizeof(cga_modes[0]))
|
|
return cga_modes[bios_mode];
|
|
else
|
|
return M_C80x25;
|
|
break;
|
|
|
|
case KD_MONO:
|
|
case KD_HERCULES:
|
|
return M_EGAMONO80x25; /* XXX: this name is confusing */
|
|
|
|
default:
|
|
break;
|
|
}
|
|
return -1;
|
|
}
|
|
|
|
/* look up a parameter table entry */
|
|
static u_char
|
|
*get_mode_param(int mode)
|
|
{
|
|
#if !defined(VGA_NO_BIOS) && !defined(VGA_NO_MODE_CHANGE)
|
|
if (mode >= V_MODE_MAP_SIZE)
|
|
mode = map_mode_num(mode);
|
|
#endif
|
|
if ((mode >= 0) && (mode < V_MODE_MAP_SIZE))
|
|
return mode_map[mode];
|
|
else
|
|
return NULL;
|
|
}
|
|
|
|
#ifndef VGA_NO_BIOS
|
|
static void
|
|
fill_adapter_param(int code, video_adapter_t *adp)
|
|
{
|
|
static struct {
|
|
int primary;
|
|
int secondary;
|
|
} dcc[] = {
|
|
{ DCC_MONO, DCC_EGA40 /* CGA monitor */ },
|
|
{ DCC_MONO, DCC_EGA80 /* CGA monitor */ },
|
|
{ DCC_MONO, DCC_EGA80 },
|
|
{ DCC_MONO, DCC_EGA80 },
|
|
{ DCC_CGA40, DCC_EGAMONO },
|
|
{ DCC_CGA80, DCC_EGAMONO },
|
|
{ DCC_EGA40 /* CGA monitor */, DCC_MONO},
|
|
{ DCC_EGA80 /* CGA monitor */, DCC_MONO},
|
|
{ DCC_EGA80, DCC_MONO },
|
|
{ DCC_EGA80, DCC_MONO },
|
|
{ DCC_EGAMONO, DCC_CGA40 },
|
|
{ DCC_EGAMONO, DCC_CGA80 },
|
|
};
|
|
|
|
if ((code < 0) || (code >= sizeof(dcc)/sizeof(dcc[0]))) {
|
|
adp[V_ADP_PRIMARY] = adapter_init_value[DCC_MONO];
|
|
adp[V_ADP_SECONDARY] = adapter_init_value[DCC_CGA80];
|
|
} else {
|
|
adp[V_ADP_PRIMARY] = adapter_init_value[dcc[code].primary];
|
|
adp[V_ADP_SECONDARY] = adapter_init_value[dcc[code].secondary];
|
|
}
|
|
}
|
|
#endif /* VGA_NO_BIOS */
|
|
|
|
static int
|
|
verify_adapter(video_adapter_t *adp)
|
|
{
|
|
vm_offset_t buf;
|
|
u_int16_t v;
|
|
#if !defined(VGA_NO_BIOS) && !defined(VGA_NO_MODE_CHANGE)
|
|
u_int32_t p;
|
|
#endif
|
|
|
|
buf = BIOS_PADDRTOVADDR(adp->va_window);
|
|
v = readw(buf);
|
|
writew(buf, 0xA55A);
|
|
if (readw(buf) != 0xA55A)
|
|
return ENXIO;
|
|
writew(buf, v);
|
|
|
|
switch (adp->va_type) {
|
|
|
|
case KD_EGA:
|
|
outb(adp->va_crtc_addr, 7);
|
|
if (inb(adp->va_crtc_addr) == 7) {
|
|
adp->va_type = KD_VGA;
|
|
adp->va_name = "vga";
|
|
adp->va_flags |= V_ADP_STATESAVE | V_ADP_PALETTE;
|
|
}
|
|
adp->va_flags |= V_ADP_STATELOAD | V_ADP_BORDER;
|
|
/* the color adapter may be in the 40x25 mode... XXX */
|
|
|
|
#if !defined(VGA_NO_BIOS) && !defined(VGA_NO_MODE_CHANGE)
|
|
/* get the BIOS video mode pointer */
|
|
p = *(u_int32_t *)BIOS_PADDRTOVADDR(0x4a8);
|
|
p = BIOS_SADDRTOLADDR(p);
|
|
if (ISMAPPED(p, sizeof(u_int32_t))) {
|
|
p = *(u_int32_t *)BIOS_PADDRTOVADDR(p);
|
|
p = BIOS_SADDRTOLADDR(p);
|
|
if (ISMAPPED(p, V_MODE_PARAM_SIZE))
|
|
video_mode_ptr = (u_char *)BIOS_PADDRTOVADDR(p);
|
|
}
|
|
#endif
|
|
break;
|
|
|
|
case KD_CGA:
|
|
adp->va_flags |= V_ADP_COLOR | V_ADP_BORDER;
|
|
/* may be in the 40x25 mode... XXX */
|
|
#if !defined(VGA_NO_BIOS) && !defined(VGA_NO_MODE_CHANGE)
|
|
/* get the BIOS video mode pointer */
|
|
p = *(u_int32_t *)BIOS_PADDRTOVADDR(0x1d*4);
|
|
p = BIOS_SADDRTOLADDR(p);
|
|
video_mode_ptr2 = (u_char *)BIOS_PADDRTOVADDR(p);
|
|
#endif
|
|
break;
|
|
|
|
case KD_MONO:
|
|
#if !defined(VGA_NO_BIOS) && !defined(VGA_NO_MODE_CHANGE)
|
|
/* get the BIOS video mode pointer */
|
|
p = *(u_int32_t *)BIOS_PADDRTOVADDR(0x1d*4);
|
|
p = BIOS_SADDRTOLADDR(p);
|
|
video_mode_ptr2 = (u_char *)BIOS_PADDRTOVADDR(p);
|
|
#endif
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
update_adapter_info(video_adapter_t *adp, video_info_t *info)
|
|
{
|
|
adp->va_flags &= ~V_ADP_COLOR;
|
|
adp->va_flags |=
|
|
(info->vi_flags & V_INFO_COLOR) ? V_ADP_COLOR : 0;
|
|
adp->va_crtc_addr =
|
|
(adp->va_flags & V_ADP_COLOR) ? COLOR_CRTC : MONO_CRTC;
|
|
adp->va_window = BIOS_PADDRTOVADDR(info->vi_window);
|
|
adp->va_window_size = info->vi_window_size;
|
|
adp->va_window_gran = info->vi_window_gran;
|
|
adp->va_window_orig = 0;
|
|
/* XXX */
|
|
adp->va_buffer = info->vi_buffer;
|
|
adp->va_buffer_size = info->vi_buffer_size;
|
|
if (info->vi_mem_model == V_INFO_MM_VGAX) {
|
|
adp->va_line_width = info->vi_width/2;
|
|
} else if (info->vi_flags & V_INFO_GRAPHICS) {
|
|
switch (info->vi_depth/info->vi_planes) {
|
|
case 1:
|
|
adp->va_line_width = info->vi_width/8;
|
|
break;
|
|
case 2:
|
|
adp->va_line_width = info->vi_width/4;
|
|
break;
|
|
case 4:
|
|
adp->va_line_width = info->vi_width/2;
|
|
break;
|
|
case 8:
|
|
default: /* shouldn't happen */
|
|
adp->va_line_width = info->vi_width;
|
|
break;
|
|
}
|
|
} else {
|
|
adp->va_line_width = info->vi_width;
|
|
}
|
|
adp->va_disp_start.x = 0;
|
|
adp->va_disp_start.y = 0;
|
|
bcopy(info, &adp->va_info, sizeof(adp->va_info));
|
|
}
|
|
|
|
#if !defined(VGA_NO_BIOS) && !defined(VGA_NO_MODE_CHANGE)
|
|
/* compare two parameter table entries */
|
|
static int
|
|
comp_adpregs(u_char *buf1, u_char *buf2)
|
|
{
|
|
static struct {
|
|
u_char mask;
|
|
} params[V_MODE_PARAM_SIZE] = {
|
|
{0xff}, {0x00}, {0xff}, /* COLS}, ROWS}, POINTS */
|
|
{0x00}, {0x00}, /* page length */
|
|
{0xfe}, {0xff}, {0xff}, {0xff}, /* sequencer registers */
|
|
{0xf3}, /* misc register */
|
|
{0xff}, {0xff}, {0xff}, {0x7f}, {0xff}, /* CRTC */
|
|
{0xff}, {0xff}, {0xff}, {0x7f}, {0xff},
|
|
{0x00}, {0x00}, {0x00}, {0x00}, {0x00},
|
|
{0x00}, {0xff}, {0x7f}, {0xff}, {0xff},
|
|
{0x7f}, {0xff}, {0xff}, {0xef}, {0xff},
|
|
{0xff}, {0xff}, {0xff}, {0xff}, {0xff}, /* attribute controller regs */
|
|
{0xff}, {0xff}, {0xff}, {0xff}, {0xff},
|
|
{0xff}, {0xff}, {0xff}, {0xff}, {0xff},
|
|
{0xff}, {0xff}, {0xff}, {0xff}, {0xf0},
|
|
{0xff}, {0xff}, {0xff}, {0xff}, {0xff}, /* GDC register */
|
|
{0xff}, {0xff}, {0xff}, {0xff},
|
|
};
|
|
int identical = TRUE;
|
|
int i;
|
|
|
|
if ((buf1 == NULL) || (buf2 == NULL))
|
|
return COMP_DIFFERENT;
|
|
|
|
for (i = 0; i < sizeof(params)/sizeof(params[0]); ++i) {
|
|
if (params[i].mask == 0) /* don't care */
|
|
continue;
|
|
if ((buf1[i] & params[i].mask) != (buf2[i] & params[i].mask))
|
|
return COMP_DIFFERENT;
|
|
if (buf1[i] != buf2[i])
|
|
identical = FALSE;
|
|
}
|
|
return (identical) ? COMP_IDENTICAL : COMP_SIMILAR;
|
|
}
|
|
#endif /* !VGA_NO_BIOS && !VGA_NO_MODE_CHANGE */
|
|
|
|
/* probe video adapters and return the number of detected adapters */
|
|
static int
|
|
probe_adapters(void)
|
|
{
|
|
video_adapter_t *adp;
|
|
video_info_t info;
|
|
#if !defined(VGA_NO_BIOS) && !defined(VGA_NO_MODE_CHANGE)
|
|
u_char *mp;
|
|
#endif
|
|
int i;
|
|
|
|
/* do this test only once */
|
|
if (vga_init_done)
|
|
return biosadapters;
|
|
vga_init_done = TRUE;
|
|
|
|
/*
|
|
* Locate display adapters.
|
|
* The AT architecture supports upto two adapters. `syscons' allows
|
|
* the following combinations of adapters:
|
|
* 1) MDA + CGA
|
|
* 2) MDA + EGA/VGA color
|
|
* 3) CGA + EGA/VGA mono
|
|
* Note that `syscons' doesn't bother with MCGA as it is only
|
|
* avaiable for low end PS/2 models which has 80286 or earlier CPUs,
|
|
* thus, they are not running FreeBSD!
|
|
* When there are two adapaters in the system, one becomes `primary'
|
|
* and the other `secondary'. The EGA adapter has a set of DIP
|
|
* switches on board for this information and the EGA BIOS copies
|
|
* it in the BIOS data area BIOSDATA_VIDEOSWITCH (40:88).
|
|
* The VGA BIOS has more sophisticated mechanism and has this
|
|
* information in BIOSDATA_DCCINDEX (40:8a), but it also maintains
|
|
* compatibility with the EGA BIOS by updating BIOSDATA_VIDEOSWITCH.
|
|
*/
|
|
|
|
/*
|
|
* Check rtc and BIOS data area.
|
|
* XXX: we don't use BIOSDATA_EQUIPMENT, since it is not a dead
|
|
* copy of RTC_EQUIPMENT. Bits 4 and 5 of ETC_EQUIPMENT are
|
|
* zeros for EGA and VGA. However, the EGA/VGA BIOS sets
|
|
* these bits in BIOSDATA_EQUIPMENT according to the monitor
|
|
* type detected.
|
|
*/
|
|
#ifndef VGA_NO_BIOS
|
|
if (*(u_int32_t *)BIOS_PADDRTOVADDR(0x4a8)) {
|
|
/* EGA/VGA BIOS is present */
|
|
fill_adapter_param(readb(BIOS_PADDRTOVADDR(0x488)) & 0x0f,
|
|
biosadapter);
|
|
} else {
|
|
switch ((rtcin(RTC_EQUIPMENT) >> 4) & 3) { /* bit 4 and 5 */
|
|
case 0:
|
|
/* EGA/VGA: shouldn't be happening */
|
|
fill_adapter_param(readb(BIOS_PADDRTOVADDR(0x488)) & 0x0f,
|
|
biosadapter);
|
|
break;
|
|
case 1:
|
|
/* CGA 40x25 */
|
|
/* FIXME: switch to the 80x25 mode? XXX */
|
|
biosadapter[V_ADP_PRIMARY] = adapter_init_value[DCC_CGA40];
|
|
biosadapter[V_ADP_SECONDARY] = adapter_init_value[DCC_MONO];
|
|
break;
|
|
case 2:
|
|
/* CGA 80x25 */
|
|
biosadapter[V_ADP_PRIMARY] = adapter_init_value[DCC_CGA80];
|
|
biosadapter[V_ADP_SECONDARY] = adapter_init_value[DCC_MONO];
|
|
break;
|
|
case 3:
|
|
/* MDA */
|
|
biosadapter[V_ADP_PRIMARY] = adapter_init_value[DCC_MONO];
|
|
biosadapter[V_ADP_SECONDARY] = adapter_init_value[DCC_CGA80];
|
|
break;
|
|
}
|
|
}
|
|
#else
|
|
/* assume EGA/VGA? XXX */
|
|
biosadapter[V_ADP_PRIMARY] = adapter_init_value[DCC_EGA80];
|
|
biosadapter[V_ADP_SECONDARY] = adapter_init_value[DCC_MONO];
|
|
#endif /* VGA_NO_BIOS */
|
|
|
|
biosadapters = 0;
|
|
if (verify_adapter(&biosadapter[V_ADP_SECONDARY]) == 0) {
|
|
++biosadapters;
|
|
biosadapter[V_ADP_SECONDARY].va_flags |= V_ADP_PROBED;
|
|
biosadapter[V_ADP_SECONDARY].va_mode =
|
|
biosadapter[V_ADP_SECONDARY].va_initial_mode =
|
|
map_bios_mode_num(biosadapter[V_ADP_SECONDARY].va_type,
|
|
biosadapter[V_ADP_SECONDARY].va_flags
|
|
& V_ADP_COLOR,
|
|
biosadapter[V_ADP_SECONDARY].va_initial_bios_mode);
|
|
} else {
|
|
biosadapter[V_ADP_SECONDARY].va_type = -1;
|
|
}
|
|
if (verify_adapter(&biosadapter[V_ADP_PRIMARY]) == 0) {
|
|
++biosadapters;
|
|
biosadapter[V_ADP_PRIMARY].va_flags |= V_ADP_PROBED;
|
|
#ifndef VGA_NO_BIOS
|
|
biosadapter[V_ADP_PRIMARY].va_initial_bios_mode =
|
|
readb(BIOS_PADDRTOVADDR(0x449));
|
|
#else
|
|
biosadapter[V_ADP_PRIMARY].va_initial_bios_mode = 3; /* XXX */
|
|
#endif
|
|
biosadapter[V_ADP_PRIMARY].va_mode =
|
|
biosadapter[V_ADP_PRIMARY].va_initial_mode =
|
|
map_bios_mode_num(biosadapter[V_ADP_PRIMARY].va_type,
|
|
biosadapter[V_ADP_PRIMARY].va_flags & V_ADP_COLOR,
|
|
biosadapter[V_ADP_PRIMARY].va_initial_bios_mode);
|
|
} else {
|
|
biosadapter[V_ADP_PRIMARY] = biosadapter[V_ADP_SECONDARY];
|
|
biosadapter[V_ADP_SECONDARY].va_type = -1;
|
|
}
|
|
if (biosadapters == 0)
|
|
return biosadapters;
|
|
biosadapter[V_ADP_PRIMARY].va_unit = V_ADP_PRIMARY;
|
|
biosadapter[V_ADP_SECONDARY].va_unit = V_ADP_SECONDARY;
|
|
|
|
#if 0 /* we don't need these... */
|
|
fb_init_struct(&biosadapter[V_ADP_PRIMARY], ...);
|
|
fb_init_struct(&biosadapter[V_ADP_SECONDARY], ...);
|
|
#endif
|
|
|
|
#if notyet
|
|
/*
|
|
* We cannot have two video adapter of the same type; there must be
|
|
* only one of color or mono adapter, or one each of them.
|
|
*/
|
|
if (biosadapters > 1) {
|
|
if (!((biosadapter[0].va_flags ^ biosadapter[1].va_flags)
|
|
& V_ADP_COLOR))
|
|
/* we have two mono or color adapters!! */
|
|
return (biosadapters = 0);
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* Ensure a zero start address. The registers are w/o
|
|
* for old hardware so it's too hard to relocate the active screen
|
|
* memory.
|
|
* This must be done before vga_save_state() for VGA.
|
|
*/
|
|
outb(biosadapter[V_ADP_PRIMARY].va_crtc_addr, 12);
|
|
outb(biosadapter[V_ADP_PRIMARY].va_crtc_addr + 1, 0);
|
|
outb(biosadapter[V_ADP_PRIMARY].va_crtc_addr, 13);
|
|
outb(biosadapter[V_ADP_PRIMARY].va_crtc_addr + 1, 0);
|
|
|
|
/* the video mode parameter table in EGA/VGA BIOS */
|
|
/* NOTE: there can be only one EGA/VGA, wheather color or mono,
|
|
* recognized by the video BIOS.
|
|
*/
|
|
if ((biosadapter[V_ADP_PRIMARY].va_type == KD_EGA) ||
|
|
(biosadapter[V_ADP_PRIMARY].va_type == KD_VGA)) {
|
|
adp = &biosadapter[V_ADP_PRIMARY];
|
|
} else if ((biosadapter[V_ADP_SECONDARY].va_type == KD_EGA) ||
|
|
(biosadapter[V_ADP_SECONDARY].va_type == KD_VGA)) {
|
|
adp = &biosadapter[V_ADP_SECONDARY];
|
|
} else {
|
|
adp = NULL;
|
|
}
|
|
bzero(mode_map, sizeof(mode_map));
|
|
if (adp != NULL) {
|
|
if (adp->va_type == KD_VGA) {
|
|
vga_save_state(adp, &adpstate, sizeof(adpstate));
|
|
#if defined(VGA_NO_BIOS) || defined(VGA_NO_MODE_CHANGE)
|
|
mode_map[adp->va_initial_mode] = adpstate.regs;
|
|
rows_offset = 1;
|
|
#else /* VGA_NO_BIOS || VGA_NO_MODE_CHANGE */
|
|
if (video_mode_ptr == NULL) {
|
|
mode_map[adp->va_initial_mode] = adpstate.regs;
|
|
rows_offset = 1;
|
|
} else {
|
|
/* discard the table if we are not familiar with it... */
|
|
map_mode_table(mode_map, video_mode_ptr, M_VGA_CG320 + 1);
|
|
mp = get_mode_param(adp->va_initial_mode);
|
|
if (mp != NULL)
|
|
bcopy(mp, adpstate2.regs, sizeof(adpstate2.regs));
|
|
switch (comp_adpregs(adpstate.regs, mp)) {
|
|
case COMP_IDENTICAL:
|
|
/*
|
|
* OK, this parameter table looks reasonably familiar
|
|
* to us...
|
|
*/
|
|
/*
|
|
* This is a kludge for Toshiba DynaBook SS433
|
|
* whose BIOS video mode table entry has the actual #
|
|
* of rows at the offset 1; BIOSes from other
|
|
* manufacturers store the # of rows - 1 there. XXX
|
|
*/
|
|
rows_offset = adpstate.regs[1] + 1 - mp[1];
|
|
break;
|
|
|
|
case COMP_SIMILAR:
|
|
/*
|
|
* Not exactly the same, but similar enough to be
|
|
* trusted. However, use the saved register values
|
|
* for the initial mode and other modes which are
|
|
* based on the initial mode.
|
|
*/
|
|
mode_map[adp->va_initial_mode] = adpstate.regs;
|
|
rows_offset = adpstate.regs[1] + 1 - mp[1];
|
|
adpstate.regs[1] -= rows_offset - 1;
|
|
break;
|
|
|
|
case COMP_DIFFERENT:
|
|
default:
|
|
/*
|
|
* Don't use the paramter table in BIOS. It doesn't
|
|
* look familiar to us. Video mode switching is allowed
|
|
* only if the new mode is the same as or based on
|
|
* the initial mode.
|
|
*/
|
|
video_mode_ptr = NULL;
|
|
bzero(mode_map, sizeof(mode_map));
|
|
mode_map[adp->va_initial_mode] = adpstate.regs;
|
|
rows_offset = 1;
|
|
break;
|
|
}
|
|
}
|
|
#endif /* VGA_NO_BIOS || VGA_NO_MODE_CHANGE */
|
|
|
|
#ifndef VGA_NO_MODE_CHANGE
|
|
adp->va_flags |= V_ADP_MODECHANGE;
|
|
#endif
|
|
#ifndef VGA_NO_FONT_LOADING
|
|
adp->va_flags |= V_ADP_FONT;
|
|
#endif
|
|
} else if (adp->va_type == KD_EGA) {
|
|
#if defined(VGA_NO_BIOS) || defined(VGA_NO_MODE_CHANGE)
|
|
rows_offset = 1;
|
|
#else /* VGA_NO_BIOS || VGA_NO_MODE_CHANGE */
|
|
if (video_mode_ptr == NULL) {
|
|
rows_offset = 1;
|
|
} else {
|
|
map_mode_table(mode_map, video_mode_ptr, M_ENH_C80x25 + 1);
|
|
/* XXX how can one validate the EGA table... */
|
|
mp = get_mode_param(adp->va_initial_mode);
|
|
if (mp != NULL) {
|
|
adp->va_flags |= V_ADP_MODECHANGE;
|
|
#ifndef VGA_NO_FONT_LOADING
|
|
adp->va_flags |= V_ADP_FONT;
|
|
#endif
|
|
rows_offset = 1;
|
|
} else {
|
|
/*
|
|
* This is serious. We will not be able to switch video
|
|
* modes at all...
|
|
*/
|
|
video_mode_ptr = NULL;
|
|
bzero(mode_map, sizeof(mode_map));
|
|
rows_offset = 1;
|
|
}
|
|
}
|
|
#endif /* VGA_NO_BIOS || VGA_NO_MODE_CHANGE */
|
|
}
|
|
}
|
|
|
|
/* remove conflicting modes if we have more than one adapter */
|
|
if (biosadapters > 0) {
|
|
for (i = 0; i < biosadapters; ++i) {
|
|
if (!(biosadapter[i].va_flags & V_ADP_MODECHANGE))
|
|
continue;
|
|
clear_mode_map(&biosadapter[i], mode_map, M_VGA_CG320 + 1,
|
|
(biosadapter[i].va_flags & V_ADP_COLOR) ?
|
|
V_INFO_COLOR : 0);
|
|
if ((biosadapter[i].va_type == KD_VGA)
|
|
|| (biosadapter[i].va_type == KD_EGA)) {
|
|
biosadapter[i].va_io_base =
|
|
(biosadapter[i].va_flags & V_ADP_COLOR) ?
|
|
IO_VGA : IO_MDA;
|
|
biosadapter[i].va_io_size = 32;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* buffer address */
|
|
vga_get_info(&biosadapter[V_ADP_PRIMARY],
|
|
biosadapter[V_ADP_PRIMARY].va_initial_mode, &info);
|
|
info.vi_flags &= ~V_INFO_LINEAR; /* XXX */
|
|
update_adapter_info(&biosadapter[V_ADP_PRIMARY], &info);
|
|
|
|
if (biosadapters > 1) {
|
|
vga_get_info(&biosadapter[V_ADP_SECONDARY],
|
|
biosadapter[V_ADP_SECONDARY].va_initial_mode, &info);
|
|
info.vi_flags &= ~V_INFO_LINEAR; /* XXX */
|
|
update_adapter_info(&biosadapter[V_ADP_SECONDARY], &info);
|
|
}
|
|
|
|
/*
|
|
* XXX: we should verify the following values for the primary adapter...
|
|
* crtc I/O port address: *(u_int16_t *)BIOS_PADDRTOVADDR(0x463);
|
|
* color/mono display: (*(u_int8_t *)BIOS_PADDRTOVADDR(0x487) & 0x02)
|
|
* ? 0 : V_ADP_COLOR;
|
|
* columns: *(u_int8_t *)BIOS_PADDRTOVADDR(0x44a);
|
|
* rows: *(u_int8_t *)BIOS_PADDRTOVADDR(0x484);
|
|
* font size: *(u_int8_t *)BIOS_PADDRTOVADDR(0x485);
|
|
* buffer size: *(u_int16_t *)BIOS_PADDRTOVADDR(0x44c);
|
|
*/
|
|
|
|
return biosadapters;
|
|
}
|
|
|
|
/* set the scan line length in pixel */
|
|
static int
|
|
set_line_length(video_adapter_t *adp, int pixel)
|
|
{
|
|
u_char *mp;
|
|
int ppw; /* pixels per word */
|
|
int bpl; /* bytes per line */
|
|
int count;
|
|
|
|
if ((adp->va_type != KD_VGA) && (adp->va_type != KD_EGA))
|
|
return ENODEV;
|
|
mp = get_mode_param(adp->va_mode);
|
|
if (mp == NULL)
|
|
return EINVAL;
|
|
|
|
switch (adp->va_info.vi_mem_model) {
|
|
case V_INFO_MM_PLANAR:
|
|
ppw = 16/(adp->va_info.vi_depth/adp->va_info.vi_planes);
|
|
count = (pixel + ppw - 1)/ppw/2;
|
|
bpl = ((pixel + ppw - 1)/ppw/2)*4;
|
|
break;
|
|
case V_INFO_MM_PACKED:
|
|
count = (pixel + 7)/8;
|
|
bpl = ((pixel + 7)/8)*8;
|
|
break;
|
|
case V_INFO_MM_TEXT:
|
|
count = (pixel + 7)/8; /* columns */
|
|
bpl = (pixel + 7)/8; /* columns */
|
|
break;
|
|
default:
|
|
return ENODEV;
|
|
}
|
|
|
|
if (mp[10 + 0x17] & 0x40) /* CRTC mode control reg */
|
|
count *= 2; /* byte mode */
|
|
outb(adp->va_crtc_addr, 0x13);
|
|
outb(adp->va_crtc_addr + 1, count);
|
|
adp->va_line_width = bpl;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
set_display_start(video_adapter_t *adp, int x, int y)
|
|
{
|
|
int off; /* byte offset (graphics mode)/word offset (text mode) */
|
|
int poff; /* pixel offset */
|
|
int roff; /* row offset */
|
|
int ppb; /* pixels per byte */
|
|
|
|
if ((adp->va_type != KD_VGA) && (adp->va_type != KD_EGA))
|
|
x &= ~7;
|
|
if (adp->va_info.vi_flags & V_INFO_GRAPHICS) {
|
|
ppb = 8/(adp->va_info.vi_depth/adp->va_info.vi_planes);
|
|
off = y*adp->va_line_width + x/ppb;
|
|
roff = 0;
|
|
poff = x%ppb;
|
|
} else {
|
|
if ((adp->va_type == KD_VGA) || (adp->va_type == KD_EGA)) {
|
|
outb(TSIDX, 1);
|
|
if (inb(TSREG) & 1)
|
|
ppb = 9;
|
|
else
|
|
ppb = 8;
|
|
} else {
|
|
ppb = 8;
|
|
}
|
|
off = y/adp->va_info.vi_cheight*adp->va_line_width + x/ppb;
|
|
roff = y%adp->va_info.vi_cheight;
|
|
/* FIXME: is this correct? XXX */
|
|
if (ppb == 8)
|
|
poff = x%ppb;
|
|
else
|
|
poff = (x + 8)%ppb;
|
|
}
|
|
|
|
/* start address */
|
|
outb(adp->va_crtc_addr, 0xc); /* high */
|
|
outb(adp->va_crtc_addr + 1, off >> 8);
|
|
outb(adp->va_crtc_addr, 0xd); /* low */
|
|
outb(adp->va_crtc_addr + 1, off & 0xff);
|
|
|
|
/* horizontal pel pan */
|
|
if ((adp->va_type == KD_VGA) || (adp->va_type == KD_EGA)) {
|
|
inb(adp->va_crtc_addr + 6);
|
|
outb(ATC, 0x13 | 0x20);
|
|
outb(ATC, poff);
|
|
inb(adp->va_crtc_addr + 6);
|
|
outb(ATC, 0x20);
|
|
}
|
|
|
|
/* preset raw scan */
|
|
outb(adp->va_crtc_addr, 8);
|
|
outb(adp->va_crtc_addr + 1, roff);
|
|
|
|
adp->va_disp_start.x = x;
|
|
adp->va_disp_start.y = y;
|
|
return 0;
|
|
}
|
|
|
|
#if defined(__i386__) || defined(__amd64__) /* XXX */
|
|
static void
|
|
fill(int val, void *d, size_t size)
|
|
{
|
|
u_char *p = d;
|
|
|
|
while (size-- > 0)
|
|
*p++ = val;
|
|
}
|
|
#endif /* __i386__ */
|
|
|
|
static void
|
|
filll_io(int val, vm_offset_t d, size_t size)
|
|
{
|
|
while (size-- > 0) {
|
|
writel(d, val);
|
|
d += sizeof(u_int32_t);
|
|
}
|
|
}
|
|
|
|
/* entry points */
|
|
|
|
#if 0
|
|
static int
|
|
vga_nop(void)
|
|
{
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static int
|
|
vga_error(void)
|
|
{
|
|
return ENODEV;
|
|
}
|
|
|
|
static int
|
|
vga_probe(int unit, video_adapter_t **adpp, void *arg, int flags)
|
|
{
|
|
probe_adapters();
|
|
if (unit >= biosadapters)
|
|
return ENXIO;
|
|
|
|
*adpp = &biosadapter[unit];
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
vga_init(int unit, video_adapter_t *adp, int flags)
|
|
{
|
|
if ((unit >= biosadapters) || (adp == NULL) || !probe_done(adp))
|
|
return ENXIO;
|
|
|
|
if (!init_done(adp)) {
|
|
/* nothing to do really... */
|
|
adp->va_flags |= V_ADP_INITIALIZED;
|
|
}
|
|
|
|
if (!config_done(adp)) {
|
|
if (vid_register(adp) < 0)
|
|
return ENXIO;
|
|
adp->va_flags |= V_ADP_REGISTERED;
|
|
}
|
|
if (vga_sub_configure != NULL)
|
|
(*vga_sub_configure)(0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* get_info():
|
|
* Return the video_info structure of the requested video mode.
|
|
*
|
|
* all adapters
|
|
*/
|
|
static int
|
|
vga_get_info(video_adapter_t *adp, int mode, video_info_t *info)
|
|
{
|
|
int i;
|
|
|
|
if (!vga_init_done)
|
|
return ENXIO;
|
|
|
|
mode = map_gen_mode_num(adp->va_type, adp->va_flags & V_ADP_COLOR, mode);
|
|
#ifndef VGA_NO_MODE_CHANGE
|
|
if (adp->va_flags & V_ADP_MODECHANGE) {
|
|
/*
|
|
* If the parameter table entry for this mode is not found,
|
|
* the mode is not supported...
|
|
*/
|
|
if (get_mode_param(mode) == NULL)
|
|
return EINVAL;
|
|
} else
|
|
#endif /* VGA_NO_MODE_CHANGE */
|
|
{
|
|
/*
|
|
* Even if we don't support video mode switching on this adapter,
|
|
* the information on the initial (thus current) video mode
|
|
* should be made available.
|
|
*/
|
|
if (mode != adp->va_initial_mode)
|
|
return EINVAL;
|
|
}
|
|
|
|
for (i = 0; bios_vmode[i].vi_mode != EOT; ++i) {
|
|
if (bios_vmode[i].vi_mode == NA)
|
|
continue;
|
|
if (mode == bios_vmode[i].vi_mode) {
|
|
*info = bios_vmode[i];
|
|
/* XXX */
|
|
info->vi_buffer_size = info->vi_window_size*info->vi_planes;
|
|
return 0;
|
|
}
|
|
}
|
|
return EINVAL;
|
|
}
|
|
|
|
/*
|
|
* query_mode():
|
|
* Find a video mode matching the requested parameters.
|
|
* Fields filled with 0 are considered "don't care" fields and
|
|
* match any modes.
|
|
*
|
|
* all adapters
|
|
*/
|
|
static int
|
|
vga_query_mode(video_adapter_t *adp, video_info_t *info)
|
|
{
|
|
int i;
|
|
|
|
if (!vga_init_done)
|
|
return ENXIO;
|
|
|
|
for (i = 0; bios_vmode[i].vi_mode != EOT; ++i) {
|
|
if (bios_vmode[i].vi_mode == NA)
|
|
continue;
|
|
|
|
if ((info->vi_width != 0)
|
|
&& (info->vi_width != bios_vmode[i].vi_width))
|
|
continue;
|
|
if ((info->vi_height != 0)
|
|
&& (info->vi_height != bios_vmode[i].vi_height))
|
|
continue;
|
|
if ((info->vi_cwidth != 0)
|
|
&& (info->vi_cwidth != bios_vmode[i].vi_cwidth))
|
|
continue;
|
|
if ((info->vi_cheight != 0)
|
|
&& (info->vi_cheight != bios_vmode[i].vi_cheight))
|
|
continue;
|
|
if ((info->vi_depth != 0)
|
|
&& (info->vi_depth != bios_vmode[i].vi_depth))
|
|
continue;
|
|
if ((info->vi_planes != 0)
|
|
&& (info->vi_planes != bios_vmode[i].vi_planes))
|
|
continue;
|
|
/* XXX: should check pixel format, memory model */
|
|
if ((info->vi_flags != 0)
|
|
&& (info->vi_flags != bios_vmode[i].vi_flags))
|
|
continue;
|
|
|
|
/* verify if this mode is supported on this adapter */
|
|
if (vga_get_info(adp, bios_vmode[i].vi_mode, info))
|
|
continue;
|
|
return 0;
|
|
}
|
|
return ENODEV;
|
|
}
|
|
|
|
/*
|
|
* set_mode():
|
|
* Change the video mode.
|
|
*
|
|
* EGA/VGA
|
|
*/
|
|
|
|
#ifndef VGA_NO_MODE_CHANGE
|
|
#ifdef VGA_WIDTH90
|
|
static void
|
|
set_width90(adp_state_t *params)
|
|
{
|
|
/*
|
|
* Based on code submitted by Kelly Yancey (kbyanc@freedomnet.com)
|
|
* and alexv@sui.gda.itesm.mx.
|
|
*/
|
|
params->regs[5] |= 1; /* toggle 8 pixel wide fonts */
|
|
params->regs[10+0x0] = 0x6b;
|
|
params->regs[10+0x1] = 0x59;
|
|
params->regs[10+0x2] = 0x5a;
|
|
params->regs[10+0x3] = 0x8e;
|
|
params->regs[10+0x4] = 0x5e;
|
|
params->regs[10+0x5] = 0x8a;
|
|
params->regs[10+0x13] = 45;
|
|
params->regs[35+0x13] = 0;
|
|
}
|
|
#endif /* VGA_WIDTH90 */
|
|
#endif /* !VGA_NO_MODE_CHANGE */
|
|
|
|
static int
|
|
vga_set_mode(video_adapter_t *adp, int mode)
|
|
{
|
|
#ifndef VGA_NO_MODE_CHANGE
|
|
video_info_t info;
|
|
adp_state_t params;
|
|
|
|
prologue(adp, V_ADP_MODECHANGE, ENODEV);
|
|
|
|
mode = map_gen_mode_num(adp->va_type,
|
|
adp->va_flags & V_ADP_COLOR, mode);
|
|
if (vga_get_info(adp, mode, &info))
|
|
return EINVAL;
|
|
|
|
#if VGA_DEBUG > 1
|
|
printf("vga_set_mode(): setting mode %d\n", mode);
|
|
#endif
|
|
|
|
params.sig = V_STATE_SIG;
|
|
bcopy(get_mode_param(mode), params.regs, sizeof(params.regs));
|
|
|
|
switch (mode) {
|
|
#ifdef VGA_WIDTH90
|
|
case M_VGA_C90x60: case M_VGA_M90x60:
|
|
set_width90(¶ms);
|
|
/* FALLTHROUGH */
|
|
#endif
|
|
case M_VGA_C80x60: case M_VGA_M80x60:
|
|
params.regs[2] = 0x08;
|
|
params.regs[19] = 0x47;
|
|
goto special_480l;
|
|
|
|
#ifdef VGA_WIDTH90
|
|
case M_VGA_C90x30: case M_VGA_M90x30:
|
|
set_width90(¶ms);
|
|
/* FALLTHROUGH */
|
|
#endif
|
|
case M_VGA_C80x30: case M_VGA_M80x30:
|
|
params.regs[19] = 0x4f;
|
|
special_480l:
|
|
params.regs[9] |= 0xc0;
|
|
params.regs[16] = 0x08;
|
|
params.regs[17] = 0x3e;
|
|
params.regs[26] = 0xea;
|
|
params.regs[28] = 0xdf;
|
|
params.regs[31] = 0xe7;
|
|
params.regs[32] = 0x04;
|
|
goto setup_mode;
|
|
|
|
#ifdef VGA_WIDTH90
|
|
case M_VGA_C90x43: case M_VGA_M90x43:
|
|
set_width90(¶ms);
|
|
/* FALLTHROUGH */
|
|
#endif
|
|
case M_ENH_C80x43: case M_ENH_B80x43:
|
|
params.regs[28] = 87;
|
|
goto special_80x50;
|
|
|
|
#ifdef VGA_WIDTH90
|
|
case M_VGA_C90x50: case M_VGA_M90x50:
|
|
set_width90(¶ms);
|
|
/* FALLTHROUGH */
|
|
#endif
|
|
case M_VGA_C80x50: case M_VGA_M80x50:
|
|
special_80x50:
|
|
params.regs[2] = 8;
|
|
params.regs[19] = 7;
|
|
goto setup_mode;
|
|
|
|
#ifdef VGA_WIDTH90
|
|
case M_VGA_C90x25: case M_VGA_M90x25:
|
|
set_width90(¶ms);
|
|
/* FALLTHROUGH */
|
|
#endif
|
|
case M_VGA_C40x25: case M_VGA_C80x25:
|
|
case M_VGA_M80x25:
|
|
case M_B40x25: case M_C40x25:
|
|
case M_B80x25: case M_C80x25:
|
|
case M_ENH_B40x25: case M_ENH_C40x25:
|
|
case M_ENH_B80x25: case M_ENH_C80x25:
|
|
case M_EGAMONO80x25:
|
|
|
|
setup_mode:
|
|
vga_load_state(adp, ¶ms);
|
|
break;
|
|
|
|
case M_VGA_MODEX:
|
|
/* "unchain" the VGA mode */
|
|
params.regs[5-1+0x04] &= 0xf7;
|
|
params.regs[5-1+0x04] |= 0x04;
|
|
/* turn off doubleword mode */
|
|
params.regs[10+0x14] &= 0xbf;
|
|
/* turn off word addressing */
|
|
params.regs[10+0x17] |= 0x40;
|
|
/* set logical screen width */
|
|
params.regs[10+0x13] = 80;
|
|
/* set 240 lines */
|
|
params.regs[10+0x11] = 0x2c;
|
|
params.regs[10+0x06] = 0x0d;
|
|
params.regs[10+0x07] = 0x3e;
|
|
params.regs[10+0x10] = 0xea;
|
|
params.regs[10+0x11] = 0xac;
|
|
params.regs[10+0x12] = 0xdf;
|
|
params.regs[10+0x15] = 0xe7;
|
|
params.regs[10+0x16] = 0x06;
|
|
/* set vertical sync polarity to reflect aspect ratio */
|
|
params.regs[9] = 0xe3;
|
|
goto setup_grmode;
|
|
|
|
case M_BG320: case M_CG320: case M_BG640:
|
|
case M_CG320_D: case M_CG640_E:
|
|
case M_CG640x350: case M_ENH_CG640:
|
|
case M_BG640x480: case M_CG640x480: case M_VGA_CG320:
|
|
|
|
setup_grmode:
|
|
vga_load_state(adp, ¶ms);
|
|
break;
|
|
|
|
default:
|
|
return EINVAL;
|
|
}
|
|
|
|
adp->va_mode = mode;
|
|
info.vi_flags &= ~V_INFO_LINEAR; /* XXX */
|
|
update_adapter_info(adp, &info);
|
|
|
|
/* move hardware cursor out of the way */
|
|
(*vidsw[adp->va_index]->set_hw_cursor)(adp, -1, -1);
|
|
|
|
return 0;
|
|
#else /* VGA_NO_MODE_CHANGE */
|
|
return ENODEV;
|
|
#endif /* VGA_NO_MODE_CHANGE */
|
|
}
|
|
|
|
#ifndef VGA_NO_FONT_LOADING
|
|
|
|
static void
|
|
set_font_mode(video_adapter_t *adp, u_char *buf)
|
|
{
|
|
u_char *mp;
|
|
int s;
|
|
|
|
s = splhigh();
|
|
|
|
/* save register values */
|
|
if (adp->va_type == KD_VGA) {
|
|
outb(TSIDX, 0x02); buf[0] = inb(TSREG);
|
|
outb(TSIDX, 0x04); buf[1] = inb(TSREG);
|
|
outb(GDCIDX, 0x04); buf[2] = inb(GDCREG);
|
|
outb(GDCIDX, 0x05); buf[3] = inb(GDCREG);
|
|
outb(GDCIDX, 0x06); buf[4] = inb(GDCREG);
|
|
inb(adp->va_crtc_addr + 6);
|
|
outb(ATC, 0x10); buf[5] = inb(ATC + 1);
|
|
} else /* if (adp->va_type == KD_EGA) */ {
|
|
/*
|
|
* EGA cannot be read; copy parameters from the mode parameter
|
|
* table.
|
|
*/
|
|
mp = get_mode_param(adp->va_mode);
|
|
buf[0] = mp[5 + 0x02 - 1];
|
|
buf[1] = mp[5 + 0x04 - 1];
|
|
buf[2] = mp[55 + 0x04];
|
|
buf[3] = mp[55 + 0x05];
|
|
buf[4] = mp[55 + 0x06];
|
|
buf[5] = mp[35 + 0x10];
|
|
}
|
|
|
|
/* setup vga for loading fonts */
|
|
inb(adp->va_crtc_addr + 6); /* reset flip-flop */
|
|
outb(ATC, 0x10); outb(ATC, buf[5] & ~0x01);
|
|
inb(adp->va_crtc_addr + 6); /* reset flip-flop */
|
|
outb(ATC, 0x20); /* enable palette */
|
|
|
|
#if VGA_SLOW_IOACCESS
|
|
#ifdef VGA_ALT_SEQACCESS
|
|
outb(TSIDX, 0x00); outb(TSREG, 0x01);
|
|
#endif
|
|
outb(TSIDX, 0x02); outb(TSREG, 0x04);
|
|
outb(TSIDX, 0x04); outb(TSREG, 0x07);
|
|
#ifdef VGA_ALT_SEQACCESS
|
|
outb(TSIDX, 0x00); outb(TSREG, 0x03);
|
|
#endif
|
|
outb(GDCIDX, 0x04); outb(GDCREG, 0x02);
|
|
outb(GDCIDX, 0x05); outb(GDCREG, 0x00);
|
|
outb(GDCIDX, 0x06); outb(GDCREG, 0x04);
|
|
#else /* VGA_SLOW_IOACCESS */
|
|
#ifdef VGA_ALT_SEQACCESS
|
|
outw(TSIDX, 0x0100);
|
|
#endif
|
|
outw(TSIDX, 0x0402);
|
|
outw(TSIDX, 0x0704);
|
|
#ifdef VGA_ALT_SEQACCESS
|
|
outw(TSIDX, 0x0300);
|
|
#endif
|
|
outw(GDCIDX, 0x0204);
|
|
outw(GDCIDX, 0x0005);
|
|
outw(GDCIDX, 0x0406); /* addr = a0000, 64kb */
|
|
#endif /* VGA_SLOW_IOACCESS */
|
|
|
|
splx(s);
|
|
}
|
|
|
|
static void
|
|
set_normal_mode(video_adapter_t *adp, u_char *buf)
|
|
{
|
|
int s;
|
|
|
|
s = splhigh();
|
|
|
|
/* setup vga for normal operation mode again */
|
|
inb(adp->va_crtc_addr + 6); /* reset flip-flop */
|
|
outb(ATC, 0x10); outb(ATC, buf[5]);
|
|
inb(adp->va_crtc_addr + 6); /* reset flip-flop */
|
|
outb(ATC, 0x20); /* enable palette */
|
|
|
|
#if VGA_SLOW_IOACCESS
|
|
#ifdef VGA_ALT_SEQACCESS
|
|
outb(TSIDX, 0x00); outb(TSREG, 0x01);
|
|
#endif
|
|
outb(TSIDX, 0x02); outb(TSREG, buf[0]);
|
|
outb(TSIDX, 0x04); outb(TSREG, buf[1]);
|
|
#ifdef VGA_ALT_SEQACCESS
|
|
outb(TSIDX, 0x00); outb(TSREG, 0x03);
|
|
#endif
|
|
outb(GDCIDX, 0x04); outb(GDCREG, buf[2]);
|
|
outb(GDCIDX, 0x05); outb(GDCREG, buf[3]);
|
|
if (adp->va_crtc_addr == MONO_CRTC) {
|
|
outb(GDCIDX, 0x06); outb(GDCREG,(buf[4] & 0x03) | 0x08);
|
|
} else {
|
|
outb(GDCIDX, 0x06); outb(GDCREG,(buf[4] & 0x03) | 0x0c);
|
|
}
|
|
#else /* VGA_SLOW_IOACCESS */
|
|
#ifdef VGA_ALT_SEQACCESS
|
|
outw(TSIDX, 0x0100);
|
|
#endif
|
|
outw(TSIDX, 0x0002 | (buf[0] << 8));
|
|
outw(TSIDX, 0x0004 | (buf[1] << 8));
|
|
#ifdef VGA_ALT_SEQACCESS
|
|
outw(TSIDX, 0x0300);
|
|
#endif
|
|
outw(GDCIDX, 0x0004 | (buf[2] << 8));
|
|
outw(GDCIDX, 0x0005 | (buf[3] << 8));
|
|
if (adp->va_crtc_addr == MONO_CRTC)
|
|
outw(GDCIDX, 0x0006 | (((buf[4] & 0x03) | 0x08)<<8));
|
|
else
|
|
outw(GDCIDX, 0x0006 | (((buf[4] & 0x03) | 0x0c)<<8));
|
|
#endif /* VGA_SLOW_IOACCESS */
|
|
|
|
splx(s);
|
|
}
|
|
|
|
#endif /* VGA_NO_FONT_LOADING */
|
|
|
|
/*
|
|
* save_font():
|
|
* Read the font data in the requested font page from the video adapter.
|
|
*
|
|
* EGA/VGA
|
|
*/
|
|
static int
|
|
vga_save_font(video_adapter_t *adp, int page, int fontsize, u_char *data,
|
|
int ch, int count)
|
|
{
|
|
#ifndef VGA_NO_FONT_LOADING
|
|
u_char buf[PARAM_BUFSIZE];
|
|
vm_offset_t segment;
|
|
int c;
|
|
#ifdef VGA_ALT_SEQACCESS
|
|
int s;
|
|
u_char val = 0;
|
|
#endif
|
|
|
|
prologue(adp, V_ADP_FONT, ENODEV);
|
|
|
|
if (fontsize < 14) {
|
|
/* FONT_8 */
|
|
fontsize = 8;
|
|
} else if (fontsize >= 32) {
|
|
fontsize = 32;
|
|
} else if (fontsize >= 16) {
|
|
/* FONT_16 */
|
|
fontsize = 16;
|
|
} else {
|
|
/* FONT_14 */
|
|
fontsize = 14;
|
|
}
|
|
|
|
if (page < 0 || page >= 8)
|
|
return EINVAL;
|
|
segment = FONT_BUF + 0x4000*page;
|
|
if (page > 3)
|
|
segment -= 0xe000;
|
|
|
|
#ifdef VGA_ALT_SEQACCESS
|
|
if (adp->va_type == KD_VGA) { /* what about EGA? XXX */
|
|
s = splhigh();
|
|
outb(TSIDX, 0x00); outb(TSREG, 0x01);
|
|
outb(TSIDX, 0x01); val = inb(TSREG); /* disable screen */
|
|
outb(TSIDX, 0x01); outb(TSREG, val | 0x20);
|
|
outb(TSIDX, 0x00); outb(TSREG, 0x03);
|
|
splx(s);
|
|
}
|
|
#endif
|
|
|
|
set_font_mode(adp, buf);
|
|
if (fontsize == 32) {
|
|
bcopy_fromio((uintptr_t)segment + ch*32, data, fontsize*count);
|
|
} else {
|
|
for (c = ch; count > 0; ++c, --count) {
|
|
bcopy_fromio((uintptr_t)segment + c*32, data, fontsize);
|
|
data += fontsize;
|
|
}
|
|
}
|
|
set_normal_mode(adp, buf);
|
|
|
|
#ifdef VGA_ALT_SEQACCESS
|
|
if (adp->va_type == KD_VGA) {
|
|
s = splhigh();
|
|
outb(TSIDX, 0x00); outb(TSREG, 0x01);
|
|
outb(TSIDX, 0x01); outb(TSREG, val & 0xdf); /* enable screen */
|
|
outb(TSIDX, 0x00); outb(TSREG, 0x03);
|
|
splx(s);
|
|
}
|
|
#endif
|
|
|
|
return 0;
|
|
#else /* VGA_NO_FONT_LOADING */
|
|
return ENODEV;
|
|
#endif /* VGA_NO_FONT_LOADING */
|
|
}
|
|
|
|
/*
|
|
* load_font():
|
|
* Set the font data in the requested font page.
|
|
* NOTE: it appears that some recent video adapters do not support
|
|
* the font page other than 0... XXX
|
|
*
|
|
* EGA/VGA
|
|
*/
|
|
static int
|
|
vga_load_font(video_adapter_t *adp, int page, int fontsize, u_char *data,
|
|
int ch, int count)
|
|
{
|
|
#ifndef VGA_NO_FONT_LOADING
|
|
u_char buf[PARAM_BUFSIZE];
|
|
vm_offset_t segment;
|
|
int c;
|
|
#ifdef VGA_ALT_SEQACCESS
|
|
int s;
|
|
u_char val = 0;
|
|
#endif
|
|
|
|
prologue(adp, V_ADP_FONT, ENODEV);
|
|
|
|
if (fontsize < 14) {
|
|
/* FONT_8 */
|
|
fontsize = 8;
|
|
} else if (fontsize >= 32) {
|
|
fontsize = 32;
|
|
} else if (fontsize >= 16) {
|
|
/* FONT_16 */
|
|
fontsize = 16;
|
|
} else {
|
|
/* FONT_14 */
|
|
fontsize = 14;
|
|
}
|
|
|
|
if (page < 0 || page >= 8)
|
|
return EINVAL;
|
|
segment = FONT_BUF + 0x4000*page;
|
|
if (page > 3)
|
|
segment -= 0xe000;
|
|
|
|
#ifdef VGA_ALT_SEQACCESS
|
|
if (adp->va_type == KD_VGA) { /* what about EGA? XXX */
|
|
s = splhigh();
|
|
outb(TSIDX, 0x00); outb(TSREG, 0x01);
|
|
outb(TSIDX, 0x01); val = inb(TSREG); /* disable screen */
|
|
outb(TSIDX, 0x01); outb(TSREG, val | 0x20);
|
|
outb(TSIDX, 0x00); outb(TSREG, 0x03);
|
|
splx(s);
|
|
}
|
|
#endif
|
|
|
|
set_font_mode(adp, buf);
|
|
if (fontsize == 32) {
|
|
bcopy_toio(data, (uintptr_t)segment + ch*32, fontsize*count);
|
|
} else {
|
|
for (c = ch; count > 0; ++c, --count) {
|
|
bcopy_toio(data, (uintptr_t)segment + c*32, fontsize);
|
|
data += fontsize;
|
|
}
|
|
}
|
|
set_normal_mode(adp, buf);
|
|
|
|
#ifdef VGA_ALT_SEQACCESS
|
|
if (adp->va_type == KD_VGA) {
|
|
s = splhigh();
|
|
outb(TSIDX, 0x00); outb(TSREG, 0x01);
|
|
outb(TSIDX, 0x01); outb(TSREG, val & 0xdf); /* enable screen */
|
|
outb(TSIDX, 0x00); outb(TSREG, 0x03);
|
|
splx(s);
|
|
}
|
|
#endif
|
|
|
|
return 0;
|
|
#else /* VGA_NO_FONT_LOADING */
|
|
return ENODEV;
|
|
#endif /* VGA_NO_FONT_LOADING */
|
|
}
|
|
|
|
/*
|
|
* show_font():
|
|
* Activate the requested font page.
|
|
* NOTE: it appears that some recent video adapters do not support
|
|
* the font page other than 0... XXX
|
|
*
|
|
* EGA/VGA
|
|
*/
|
|
static int
|
|
vga_show_font(video_adapter_t *adp, int page)
|
|
{
|
|
#ifndef VGA_NO_FONT_LOADING
|
|
static u_char cg[] = { 0x00, 0x05, 0x0a, 0x0f, 0x30, 0x35, 0x3a, 0x3f };
|
|
int s;
|
|
|
|
prologue(adp, V_ADP_FONT, ENODEV);
|
|
if (page < 0 || page >= 8)
|
|
return EINVAL;
|
|
|
|
s = splhigh();
|
|
outb(TSIDX, 0x03); outb(TSREG, cg[page]);
|
|
splx(s);
|
|
|
|
return 0;
|
|
#else /* VGA_NO_FONT_LOADING */
|
|
return ENODEV;
|
|
#endif /* VGA_NO_FONT_LOADING */
|
|
}
|
|
|
|
/*
|
|
* save_palette():
|
|
* Read DAC values. The values have expressed in 8 bits.
|
|
*
|
|
* VGA
|
|
*/
|
|
static int
|
|
vga_save_palette(video_adapter_t *adp, u_char *palette)
|
|
{
|
|
int i;
|
|
|
|
prologue(adp, V_ADP_PALETTE, ENODEV);
|
|
|
|
/*
|
|
* We store 8 bit values in the palette buffer, while the standard
|
|
* VGA has 6 bit DAC .
|
|
*/
|
|
outb(PALRADR, 0x00);
|
|
for (i = 0; i < 256*3; ++i)
|
|
palette[i] = inb(PALDATA) << 2;
|
|
inb(adp->va_crtc_addr + 6); /* reset flip/flop */
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
vga_save_palette2(video_adapter_t *adp, int base, int count,
|
|
u_char *r, u_char *g, u_char *b)
|
|
{
|
|
int i;
|
|
|
|
prologue(adp, V_ADP_PALETTE, ENODEV);
|
|
|
|
outb(PALRADR, base);
|
|
for (i = 0; i < count; ++i) {
|
|
r[i] = inb(PALDATA) << 2;
|
|
g[i] = inb(PALDATA) << 2;
|
|
b[i] = inb(PALDATA) << 2;
|
|
}
|
|
inb(adp->va_crtc_addr + 6); /* reset flip/flop */
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* load_palette():
|
|
* Set DAC values.
|
|
*
|
|
* VGA
|
|
*/
|
|
static int
|
|
vga_load_palette(video_adapter_t *adp, u_char *palette)
|
|
{
|
|
int i;
|
|
|
|
prologue(adp, V_ADP_PALETTE, ENODEV);
|
|
|
|
outb(PIXMASK, 0xff); /* no pixelmask */
|
|
outb(PALWADR, 0x00);
|
|
for (i = 0; i < 256*3; ++i)
|
|
outb(PALDATA, palette[i] >> 2);
|
|
inb(adp->va_crtc_addr + 6); /* reset flip/flop */
|
|
outb(ATC, 0x20); /* enable palette */
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
vga_load_palette2(video_adapter_t *adp, int base, int count,
|
|
u_char *r, u_char *g, u_char *b)
|
|
{
|
|
int i;
|
|
|
|
prologue(adp, V_ADP_PALETTE, ENODEV);
|
|
|
|
outb(PIXMASK, 0xff); /* no pixelmask */
|
|
outb(PALWADR, base);
|
|
for (i = 0; i < count; ++i) {
|
|
outb(PALDATA, r[i] >> 2);
|
|
outb(PALDATA, g[i] >> 2);
|
|
outb(PALDATA, b[i] >> 2);
|
|
}
|
|
inb(adp->va_crtc_addr + 6); /* reset flip/flop */
|
|
outb(ATC, 0x20); /* enable palette */
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* set_border():
|
|
* Change the border color.
|
|
*
|
|
* CGA/EGA/VGA
|
|
*/
|
|
static int
|
|
vga_set_border(video_adapter_t *adp, int color)
|
|
{
|
|
prologue(adp, V_ADP_BORDER, ENODEV);
|
|
|
|
switch (adp->va_type) {
|
|
case KD_EGA:
|
|
case KD_VGA:
|
|
inb(adp->va_crtc_addr + 6); /* reset flip-flop */
|
|
outb(ATC, 0x31); outb(ATC, color & 0xff);
|
|
break;
|
|
case KD_CGA:
|
|
outb(adp->va_crtc_addr + 5, color & 0x0f); /* color select register */
|
|
break;
|
|
case KD_MONO:
|
|
case KD_HERCULES:
|
|
default:
|
|
break;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* save_state():
|
|
* Read video register values.
|
|
* NOTE: this function only reads the standard EGA/VGA registers.
|
|
* any extra/extended registers of SVGA adapters are not saved.
|
|
*
|
|
* VGA
|
|
*/
|
|
static int
|
|
vga_save_state(video_adapter_t *adp, void *p, size_t size)
|
|
{
|
|
video_info_t info;
|
|
u_char *buf;
|
|
int crtc_addr;
|
|
int i, j;
|
|
int s;
|
|
|
|
if (size == 0) {
|
|
/* return the required buffer size */
|
|
prologue(adp, V_ADP_STATESAVE, 0);
|
|
return sizeof(adp_state_t);
|
|
} else {
|
|
prologue(adp, V_ADP_STATESAVE, ENODEV);
|
|
if (size < sizeof(adp_state_t))
|
|
return EINVAL;
|
|
}
|
|
|
|
((adp_state_t *)p)->sig = V_STATE_SIG;
|
|
buf = ((adp_state_t *)p)->regs;
|
|
bzero(buf, V_MODE_PARAM_SIZE);
|
|
crtc_addr = adp->va_crtc_addr;
|
|
|
|
s = splhigh();
|
|
|
|
outb(TSIDX, 0x00); outb(TSREG, 0x01); /* stop sequencer */
|
|
for (i = 0, j = 5; i < 4; i++) {
|
|
outb(TSIDX, i + 1);
|
|
buf[j++] = inb(TSREG);
|
|
}
|
|
buf[9] = inb(MISC + 10); /* dot-clock */
|
|
outb(TSIDX, 0x00); outb(TSREG, 0x03); /* start sequencer */
|
|
|
|
for (i = 0, j = 10; i < 25; i++) { /* crtc */
|
|
outb(crtc_addr, i);
|
|
buf[j++] = inb(crtc_addr + 1);
|
|
}
|
|
for (i = 0, j = 35; i < 20; i++) { /* attribute ctrl */
|
|
inb(crtc_addr + 6); /* reset flip-flop */
|
|
outb(ATC, i);
|
|
buf[j++] = inb(ATC + 1);
|
|
}
|
|
for (i = 0, j = 55; i < 9; i++) { /* graph data ctrl */
|
|
outb(GDCIDX, i);
|
|
buf[j++] = inb(GDCREG);
|
|
}
|
|
inb(crtc_addr + 6); /* reset flip-flop */
|
|
outb(ATC, 0x20); /* enable palette */
|
|
|
|
splx(s);
|
|
|
|
#if 1
|
|
if (vga_get_info(adp, adp->va_mode, &info) == 0) {
|
|
if (info.vi_flags & V_INFO_GRAPHICS) {
|
|
buf[0] = info.vi_width/info.vi_cwidth; /* COLS */
|
|
buf[1] = info.vi_height/info.vi_cheight - 1; /* ROWS */
|
|
} else {
|
|
buf[0] = info.vi_width; /* COLS */
|
|
buf[1] = info.vi_height - 1; /* ROWS */
|
|
}
|
|
buf[2] = info.vi_cheight; /* POINTS */
|
|
} else {
|
|
/* XXX: shouldn't be happening... */
|
|
printf("vga%d: %s: failed to obtain mode info. (vga_save_state())\n",
|
|
adp->va_unit, adp->va_name);
|
|
}
|
|
#else
|
|
buf[0] = readb(BIOS_PADDRTOVADDR(0x44a)); /* COLS */
|
|
buf[1] = readb(BIOS_PADDRTOVADDR(0x484)); /* ROWS */
|
|
buf[2] = readb(BIOS_PADDRTOVADDR(0x485)); /* POINTS */
|
|
buf[3] = readb(BIOS_PADDRTOVADDR(0x44c));
|
|
buf[4] = readb(BIOS_PADDRTOVADDR(0x44d));
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* load_state():
|
|
* Set video registers at once.
|
|
* NOTE: this function only updates the standard EGA/VGA registers.
|
|
* any extra/extended registers of SVGA adapters are not changed.
|
|
*
|
|
* EGA/VGA
|
|
*/
|
|
static int
|
|
vga_load_state(video_adapter_t *adp, void *p)
|
|
{
|
|
u_char *buf;
|
|
int crtc_addr;
|
|
int s;
|
|
int i;
|
|
|
|
prologue(adp, V_ADP_STATELOAD, ENODEV);
|
|
if (((adp_state_t *)p)->sig != V_STATE_SIG)
|
|
return EINVAL;
|
|
|
|
buf = ((adp_state_t *)p)->regs;
|
|
crtc_addr = adp->va_crtc_addr;
|
|
|
|
#if VGA_DEBUG > 1
|
|
dump_buffer(buf, V_MODE_PARAM_SIZE);
|
|
#endif
|
|
|
|
s = splhigh();
|
|
|
|
outb(TSIDX, 0x00); outb(TSREG, 0x01); /* stop sequencer */
|
|
for (i = 0; i < 4; ++i) { /* program sequencer */
|
|
outb(TSIDX, i + 1);
|
|
outb(TSREG, buf[i + 5]);
|
|
}
|
|
outb(MISC, buf[9]); /* set dot-clock */
|
|
outb(TSIDX, 0x00); outb(TSREG, 0x03); /* start sequencer */
|
|
outb(crtc_addr, 0x11);
|
|
outb(crtc_addr + 1, inb(crtc_addr + 1) & 0x7F);
|
|
for (i = 0; i < 25; ++i) { /* program crtc */
|
|
outb(crtc_addr, i);
|
|
outb(crtc_addr + 1, buf[i + 10]);
|
|
}
|
|
inb(crtc_addr+6); /* reset flip-flop */
|
|
for (i = 0; i < 20; ++i) { /* program attribute ctrl */
|
|
outb(ATC, i);
|
|
outb(ATC, buf[i + 35]);
|
|
}
|
|
for (i = 0; i < 9; ++i) { /* program graph data ctrl */
|
|
outb(GDCIDX, i);
|
|
outb(GDCREG, buf[i + 55]);
|
|
}
|
|
inb(crtc_addr + 6); /* reset flip-flop */
|
|
outb(ATC, 0x20); /* enable palette */
|
|
|
|
#if notyet /* a temporary workaround for kernel panic, XXX */
|
|
#ifndef VGA_NO_BIOS
|
|
if (adp->va_unit == V_ADP_PRIMARY) {
|
|
writeb(BIOS_PADDRTOVADDR(0x44a), buf[0]); /* COLS */
|
|
writeb(BIOS_PADDRTOVADDR(0x484), buf[1] + rows_offset - 1); /* ROWS */
|
|
writeb(BIOS_PADDRTOVADDR(0x485), buf[2]); /* POINTS */
|
|
#if 0
|
|
writeb(BIOS_PADDRTOVADDR(0x44c), buf[3]);
|
|
writeb(BIOS_PADDRTOVADDR(0x44d), buf[4]);
|
|
#endif
|
|
}
|
|
#endif /* VGA_NO_BIOS */
|
|
#endif /* notyet */
|
|
|
|
splx(s);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* set_origin():
|
|
* Change the origin (window mapping) of the banked frame buffer.
|
|
*/
|
|
static int
|
|
vga_set_origin(video_adapter_t *adp, off_t offset)
|
|
{
|
|
/*
|
|
* The standard video modes do not require window mapping;
|
|
* always return error.
|
|
*/
|
|
return ENODEV;
|
|
}
|
|
|
|
/*
|
|
* read_hw_cursor():
|
|
* Read the position of the hardware text cursor.
|
|
*
|
|
* all adapters
|
|
*/
|
|
static int
|
|
vga_read_hw_cursor(video_adapter_t *adp, int *col, int *row)
|
|
{
|
|
u_int16_t off;
|
|
int s;
|
|
|
|
if (!vga_init_done)
|
|
return ENXIO;
|
|
|
|
if (adp->va_info.vi_flags & V_INFO_GRAPHICS)
|
|
return ENODEV;
|
|
|
|
s = spltty();
|
|
outb(adp->va_crtc_addr, 14);
|
|
off = inb(adp->va_crtc_addr + 1);
|
|
outb(adp->va_crtc_addr, 15);
|
|
off = (off << 8) | inb(adp->va_crtc_addr + 1);
|
|
splx(s);
|
|
|
|
*row = off / adp->va_info.vi_width;
|
|
*col = off % adp->va_info.vi_width;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* set_hw_cursor():
|
|
* Move the hardware text cursor. If col and row are both -1,
|
|
* the cursor won't be shown.
|
|
*
|
|
* all adapters
|
|
*/
|
|
static int
|
|
vga_set_hw_cursor(video_adapter_t *adp, int col, int row)
|
|
{
|
|
u_int16_t off;
|
|
int s;
|
|
|
|
if (!vga_init_done)
|
|
return ENXIO;
|
|
|
|
if ((col == -1) && (row == -1)) {
|
|
off = -1;
|
|
} else {
|
|
if (adp->va_info.vi_flags & V_INFO_GRAPHICS)
|
|
return ENODEV;
|
|
off = row*adp->va_info.vi_width + col;
|
|
}
|
|
|
|
s = spltty();
|
|
outb(adp->va_crtc_addr, 14);
|
|
outb(adp->va_crtc_addr + 1, off >> 8);
|
|
outb(adp->va_crtc_addr, 15);
|
|
outb(adp->va_crtc_addr + 1, off & 0x00ff);
|
|
splx(s);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* set_hw_cursor_shape():
|
|
* Change the shape of the hardware text cursor. If the height is
|
|
* zero or negative, the cursor won't be shown.
|
|
*
|
|
* all adapters
|
|
*/
|
|
static int
|
|
vga_set_hw_cursor_shape(video_adapter_t *adp, int base, int height,
|
|
int celsize, int blink)
|
|
{
|
|
int s;
|
|
|
|
if (!vga_init_done)
|
|
return ENXIO;
|
|
|
|
s = spltty();
|
|
switch (adp->va_type) {
|
|
case KD_VGA:
|
|
case KD_CGA:
|
|
case KD_MONO:
|
|
case KD_HERCULES:
|
|
default:
|
|
if (height <= 0) {
|
|
/* make the cursor invisible */
|
|
outb(adp->va_crtc_addr, 10);
|
|
outb(adp->va_crtc_addr + 1, 32);
|
|
outb(adp->va_crtc_addr, 11);
|
|
outb(adp->va_crtc_addr + 1, 0);
|
|
} else {
|
|
outb(adp->va_crtc_addr, 10);
|
|
outb(adp->va_crtc_addr + 1, celsize - base - height);
|
|
outb(adp->va_crtc_addr, 11);
|
|
outb(adp->va_crtc_addr + 1, celsize - base - 1);
|
|
}
|
|
break;
|
|
case KD_EGA:
|
|
if (height <= 0) {
|
|
/* make the cursor invisible */
|
|
outb(adp->va_crtc_addr, 10);
|
|
outb(adp->va_crtc_addr + 1, celsize);
|
|
outb(adp->va_crtc_addr, 11);
|
|
outb(adp->va_crtc_addr + 1, 0);
|
|
} else {
|
|
outb(adp->va_crtc_addr, 10);
|
|
outb(adp->va_crtc_addr + 1, celsize - base - height);
|
|
outb(adp->va_crtc_addr, 11);
|
|
outb(adp->va_crtc_addr + 1, celsize - base);
|
|
}
|
|
break;
|
|
}
|
|
splx(s);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* blank_display()
|
|
* Put the display in power save/power off mode.
|
|
*
|
|
* all adapters
|
|
*/
|
|
static int
|
|
vga_blank_display(video_adapter_t *adp, int mode)
|
|
{
|
|
u_char val;
|
|
int s;
|
|
|
|
s = splhigh();
|
|
switch (adp->va_type) {
|
|
case KD_VGA:
|
|
switch (mode) {
|
|
case V_DISPLAY_SUSPEND:
|
|
case V_DISPLAY_STAND_BY:
|
|
outb(TSIDX, 0x01);
|
|
val = inb(TSREG);
|
|
outb(TSIDX, 0x01);
|
|
outb(TSREG, val | 0x20);
|
|
outb(adp->va_crtc_addr, 0x17);
|
|
val = inb(adp->va_crtc_addr + 1);
|
|
outb(adp->va_crtc_addr + 1, val & ~0x80);
|
|
break;
|
|
case V_DISPLAY_BLANK:
|
|
outb(TSIDX, 0x01);
|
|
val = inb(TSREG);
|
|
outb(TSIDX, 0x01);
|
|
outb(TSREG, val | 0x20);
|
|
break;
|
|
case V_DISPLAY_ON:
|
|
outb(TSIDX, 0x01);
|
|
val = inb(TSREG);
|
|
outb(TSIDX, 0x01);
|
|
outb(TSREG, val & 0xDF);
|
|
outb(adp->va_crtc_addr, 0x17);
|
|
val = inb(adp->va_crtc_addr + 1);
|
|
outb(adp->va_crtc_addr + 1, val | 0x80);
|
|
break;
|
|
}
|
|
break;
|
|
|
|
case KD_EGA:
|
|
/* no support yet */
|
|
splx(s);
|
|
return ENODEV;
|
|
|
|
case KD_CGA:
|
|
switch (mode) {
|
|
case V_DISPLAY_SUSPEND:
|
|
case V_DISPLAY_STAND_BY:
|
|
case V_DISPLAY_BLANK:
|
|
outb(adp->va_crtc_addr + 4, 0x25);
|
|
break;
|
|
case V_DISPLAY_ON:
|
|
outb(adp->va_crtc_addr + 4, 0x2d);
|
|
break;
|
|
}
|
|
break;
|
|
|
|
case KD_MONO:
|
|
case KD_HERCULES:
|
|
switch (mode) {
|
|
case V_DISPLAY_SUSPEND:
|
|
case V_DISPLAY_STAND_BY:
|
|
case V_DISPLAY_BLANK:
|
|
outb(adp->va_crtc_addr + 4, 0x21);
|
|
break;
|
|
case V_DISPLAY_ON:
|
|
outb(adp->va_crtc_addr + 4, 0x29);
|
|
break;
|
|
}
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
splx(s);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* mmap():
|
|
* Mmap frame buffer.
|
|
*
|
|
* all adapters
|
|
*/
|
|
static int
|
|
vga_mmap_buf(video_adapter_t *adp, vm_offset_t offset, vm_paddr_t *paddr,
|
|
int prot)
|
|
{
|
|
if (adp->va_info.vi_flags & V_INFO_LINEAR)
|
|
return -1;
|
|
|
|
#if VGA_DEBUG > 0
|
|
printf("vga_mmap_buf(): window:0x%jx, offset:0x%jx\n",
|
|
(uintmax_t)adp->va_info.vi_window, (uintmax_t)offset);
|
|
#endif
|
|
|
|
/* XXX: is this correct? */
|
|
if (offset > adp->va_window_size - PAGE_SIZE)
|
|
return -1;
|
|
|
|
*paddr = adp->va_info.vi_window + offset;
|
|
return 0;
|
|
}
|
|
|
|
#ifndef VGA_NO_MODE_CHANGE
|
|
|
|
static void
|
|
planar_fill(video_adapter_t *adp, int val)
|
|
{
|
|
int length;
|
|
int at; /* position in the frame buffer */
|
|
int l;
|
|
|
|
outw(GDCIDX, 0x0005); /* read mode 0, write mode 0 */
|
|
outw(GDCIDX, 0x0003); /* data rotate/function select */
|
|
outw(GDCIDX, 0x0f01); /* set/reset enable */
|
|
outw(GDCIDX, 0xff08); /* bit mask */
|
|
outw(GDCIDX, (val << 8) | 0x00); /* set/reset */
|
|
at = 0;
|
|
length = adp->va_line_width*adp->va_info.vi_height;
|
|
while (length > 0) {
|
|
l = imin(length, adp->va_window_size);
|
|
(*vidsw[adp->va_index]->set_win_org)(adp, at);
|
|
bzero_io(adp->va_window, l);
|
|
length -= l;
|
|
at += l;
|
|
}
|
|
outw(GDCIDX, 0x0000); /* set/reset */
|
|
outw(GDCIDX, 0x0001); /* set/reset enable */
|
|
}
|
|
|
|
static void
|
|
packed_fill(video_adapter_t *adp, int val)
|
|
{
|
|
int length;
|
|
int at; /* position in the frame buffer */
|
|
int l;
|
|
|
|
at = 0;
|
|
length = adp->va_line_width*adp->va_info.vi_height;
|
|
while (length > 0) {
|
|
l = imin(length, adp->va_window_size);
|
|
(*vidsw[adp->va_index]->set_win_org)(adp, at);
|
|
fill_io(val, adp->va_window, l);
|
|
length -= l;
|
|
at += l;
|
|
}
|
|
}
|
|
|
|
static void
|
|
direct_fill(video_adapter_t *adp, int val)
|
|
{
|
|
int length;
|
|
int at; /* position in the frame buffer */
|
|
int l;
|
|
|
|
at = 0;
|
|
length = adp->va_line_width*adp->va_info.vi_height;
|
|
while (length > 0) {
|
|
l = imin(length, adp->va_window_size);
|
|
(*vidsw[adp->va_index]->set_win_org)(adp, at);
|
|
switch (adp->va_info.vi_pixel_size) {
|
|
case sizeof(u_int16_t):
|
|
fillw_io(val, adp->va_window, l/sizeof(u_int16_t));
|
|
break;
|
|
case 3:
|
|
/* FIXME */
|
|
break;
|
|
case sizeof(u_int32_t):
|
|
filll_io(val, adp->va_window, l/sizeof(u_int32_t));
|
|
break;
|
|
}
|
|
length -= l;
|
|
at += l;
|
|
}
|
|
}
|
|
|
|
static int
|
|
vga_clear(video_adapter_t *adp)
|
|
{
|
|
switch (adp->va_info.vi_mem_model) {
|
|
case V_INFO_MM_TEXT:
|
|
/* do nothing? XXX */
|
|
break;
|
|
case V_INFO_MM_PLANAR:
|
|
planar_fill(adp, 0);
|
|
break;
|
|
case V_INFO_MM_PACKED:
|
|
packed_fill(adp, 0);
|
|
break;
|
|
case V_INFO_MM_DIRECT:
|
|
direct_fill(adp, 0);
|
|
break;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
#ifdef notyet
|
|
static void
|
|
planar_fill_rect(video_adapter_t *adp, int val, int x, int y, int cx, int cy)
|
|
{
|
|
int banksize;
|
|
int bank;
|
|
int pos;
|
|
int offset; /* offset within window */
|
|
int bx;
|
|
int l;
|
|
|
|
outw(GDCIDX, 0x0005); /* read mode 0, write mode 0 */
|
|
outw(GDCIDX, 0x0003); /* data rotate/function select */
|
|
outw(GDCIDX, 0x0f01); /* set/reset enable */
|
|
outw(GDCIDX, 0xff08); /* bit mask */
|
|
outw(GDCIDX, (val << 8) | 0x00); /* set/reset */
|
|
|
|
banksize = adp->va_window_size;
|
|
bank = -1;
|
|
while (cy > 0) {
|
|
pos = adp->va_line_width*y + x/8;
|
|
if (bank != pos/banksize) {
|
|
(*vidsw[adp->va_index]->set_win_org)(adp, pos);
|
|
bank = pos/banksize;
|
|
}
|
|
offset = pos%banksize;
|
|
bx = (x + cx)/8 - x/8;
|
|
if (x % 8) {
|
|
outw(GDCIDX, ((0xff00 >> (x % 8)) & 0xff00) | 0x08);
|
|
writeb(adp->va_window + offset, 0);
|
|
++offset;
|
|
--bx;
|
|
if (offset >= banksize) {
|
|
offset = 0;
|
|
++bank; /* next bank */
|
|
(*vidsw[adp->va_index]->set_win_org)(adp, bank*banksize);
|
|
}
|
|
outw(GDCIDX, 0xff08); /* bit mask */
|
|
}
|
|
while (bx > 0) {
|
|
l = imin(bx, banksize);
|
|
bzero_io(adp->va_window + offset, l);
|
|
offset += l;
|
|
bx -= l;
|
|
if (offset >= banksize) {
|
|
offset = 0;
|
|
++bank; /* next bank */
|
|
(*vidsw[adp->va_index]->set_win_org)(adp, bank*banksize);
|
|
}
|
|
}
|
|
if ((x + cx) % 8) {
|
|
outw(GDCIDX, (~(0xff00 >> ((x + cx) % 8)) & 0xff00) | 0x08);
|
|
writeb(adp->va_window + offset, 0);
|
|
++offset;
|
|
if (offset >= banksize) {
|
|
offset = 0;
|
|
++bank; /* next bank */
|
|
(*vidsw[adp->va_index]->set_win_org)(adp, bank*banksize);
|
|
}
|
|
outw(GDCIDX, 0xff08); /* bit mask */
|
|
}
|
|
++y;
|
|
--cy;
|
|
}
|
|
|
|
outw(GDCIDX, 0xff08); /* bit mask */
|
|
outw(GDCIDX, 0x0000); /* set/reset */
|
|
outw(GDCIDX, 0x0001); /* set/reset enable */
|
|
}
|
|
|
|
static void
|
|
packed_fill_rect(video_adapter_t *adp, int val, int x, int y, int cx, int cy)
|
|
{
|
|
int banksize;
|
|
int bank;
|
|
int pos;
|
|
int offset; /* offset within window */
|
|
int end;
|
|
|
|
banksize = adp->va_window_size;
|
|
bank = -1;
|
|
cx *= adp->va_info.vi_pixel_size;
|
|
while (cy > 0) {
|
|
pos = adp->va_line_width*y + x*adp->va_info.vi_pixel_size;
|
|
if (bank != pos/banksize) {
|
|
(*vidsw[adp->va_index]->set_win_org)(adp, pos);
|
|
bank = pos/banksize;
|
|
}
|
|
offset = pos%banksize;
|
|
end = imin(offset + cx, banksize);
|
|
fill_io(val, adp->va_window + offset,
|
|
(end - offset)/adp->va_info.vi_pixel_size);
|
|
/* the line may cross the window boundary */
|
|
if (offset + cx > banksize) {
|
|
++bank; /* next bank */
|
|
(*vidsw[adp->va_index]->set_win_org)(adp, bank*banksize);
|
|
end = offset + cx - banksize;
|
|
fill_io(val, adp->va_window, end/adp->va_info.vi_pixel_size);
|
|
}
|
|
++y;
|
|
--cy;
|
|
}
|
|
}
|
|
|
|
static void
|
|
direct_fill_rect16(video_adapter_t *adp, int val, int x, int y, int cx, int cy)
|
|
{
|
|
int banksize;
|
|
int bank;
|
|
int pos;
|
|
int offset; /* offset within window */
|
|
int end;
|
|
|
|
/*
|
|
* XXX: the function assumes that banksize is a muliple of
|
|
* sizeof(u_int16_t).
|
|
*/
|
|
banksize = adp->va_window_size;
|
|
bank = -1;
|
|
cx *= sizeof(u_int16_t);
|
|
while (cy > 0) {
|
|
pos = adp->va_line_width*y + x*sizeof(u_int16_t);
|
|
if (bank != pos/banksize) {
|
|
(*vidsw[adp->va_index]->set_win_org)(adp, pos);
|
|
bank = pos/banksize;
|
|
}
|
|
offset = pos%banksize;
|
|
end = imin(offset + cx, banksize);
|
|
fillw_io(val, adp->va_window + offset,
|
|
(end - offset)/sizeof(u_int16_t));
|
|
/* the line may cross the window boundary */
|
|
if (offset + cx > banksize) {
|
|
++bank; /* next bank */
|
|
(*vidsw[adp->va_index]->set_win_org)(adp, bank*banksize);
|
|
end = offset + cx - banksize;
|
|
fillw_io(val, adp->va_window, end/sizeof(u_int16_t));
|
|
}
|
|
++y;
|
|
--cy;
|
|
}
|
|
}
|
|
|
|
static void
|
|
direct_fill_rect24(video_adapter_t *adp, int val, int x, int y, int cx, int cy)
|
|
{
|
|
int banksize;
|
|
int bank;
|
|
int pos;
|
|
int offset; /* offset within window */
|
|
int end;
|
|
int i;
|
|
int j;
|
|
u_int8_t b[3];
|
|
|
|
b[0] = val & 0x0000ff;
|
|
b[1] = (val >> 8) & 0x0000ff;
|
|
b[2] = (val >> 16) & 0x0000ff;
|
|
banksize = adp->va_window_size;
|
|
bank = -1;
|
|
cx *= 3;
|
|
while (cy > 0) {
|
|
pos = adp->va_line_width*y + x*3;
|
|
if (bank != pos/banksize) {
|
|
(*vidsw[adp->va_index]->set_win_org)(adp, pos);
|
|
bank = pos/banksize;
|
|
}
|
|
offset = pos%banksize;
|
|
end = imin(offset + cx, banksize);
|
|
for (i = 0, j = offset; j < end; i = (++i)%3, ++j) {
|
|
writeb(adp->va_window + j, b[i]);
|
|
}
|
|
/* the line may cross the window boundary */
|
|
if (offset + cx >= banksize) {
|
|
++bank; /* next bank */
|
|
(*vidsw[adp->va_index]->set_win_org)(adp, bank*banksize);
|
|
j = 0;
|
|
end = offset + cx - banksize;
|
|
for (; j < end; i = (++i)%3, ++j) {
|
|
writeb(adp->va_window + j, b[i]);
|
|
}
|
|
}
|
|
++y;
|
|
--cy;
|
|
}
|
|
}
|
|
|
|
static void
|
|
direct_fill_rect32(video_adapter_t *adp, int val, int x, int y, int cx, int cy)
|
|
{
|
|
int banksize;
|
|
int bank;
|
|
int pos;
|
|
int offset; /* offset within window */
|
|
int end;
|
|
|
|
/*
|
|
* XXX: the function assumes that banksize is a muliple of
|
|
* sizeof(u_int32_t).
|
|
*/
|
|
banksize = adp->va_window_size;
|
|
bank = -1;
|
|
cx *= sizeof(u_int32_t);
|
|
while (cy > 0) {
|
|
pos = adp->va_line_width*y + x*sizeof(u_int32_t);
|
|
if (bank != pos/banksize) {
|
|
(*vidsw[adp->va_index]->set_win_org)(adp, pos);
|
|
bank = pos/banksize;
|
|
}
|
|
offset = pos%banksize;
|
|
end = imin(offset + cx, banksize);
|
|
filll_io(val, adp->va_window + offset,
|
|
(end - offset)/sizeof(u_int32_t));
|
|
/* the line may cross the window boundary */
|
|
if (offset + cx > banksize) {
|
|
++bank; /* next bank */
|
|
(*vidsw[adp->va_index]->set_win_org)(adp, bank*banksize);
|
|
end = offset + cx - banksize;
|
|
filll_io(val, adp->va_window, end/sizeof(u_int32_t));
|
|
}
|
|
++y;
|
|
--cy;
|
|
}
|
|
}
|
|
|
|
static int
|
|
vga_fill_rect(video_adapter_t *adp, int val, int x, int y, int cx, int cy)
|
|
{
|
|
switch (adp->va_info.vi_mem_model) {
|
|
case V_INFO_MM_TEXT:
|
|
/* do nothing? XXX */
|
|
break;
|
|
case V_INFO_MM_PLANAR:
|
|
planar_fill_rect(adp, val, x, y, cx, cy);
|
|
break;
|
|
case V_INFO_MM_PACKED:
|
|
packed_fill_rect(adp, val, x, y, cx, cy);
|
|
break;
|
|
case V_INFO_MM_DIRECT:
|
|
switch (adp->va_info.vi_pixel_size) {
|
|
case sizeof(u_int16_t):
|
|
direct_fill_rect16(adp, val, x, y, cx, cy);
|
|
break;
|
|
case 3:
|
|
direct_fill_rect24(adp, val, x, y, cx, cy);
|
|
break;
|
|
case sizeof(u_int32_t):
|
|
direct_fill_rect32(adp, val, x, y, cx, cy);
|
|
break;
|
|
}
|
|
break;
|
|
}
|
|
return 0;
|
|
}
|
|
#else /* !notyet */
|
|
static int
|
|
vga_fill_rect(video_adapter_t *adp, int val, int x, int y, int cx, int cy)
|
|
{
|
|
return ENODEV;
|
|
}
|
|
#endif /* notyet */
|
|
|
|
static int
|
|
vga_bitblt(video_adapter_t *adp,...)
|
|
{
|
|
/* FIXME */
|
|
return ENODEV;
|
|
}
|
|
|
|
#endif /* !VGA_NO_MODE_CHANGE */
|
|
|
|
static int
|
|
get_palette(video_adapter_t *adp, int base, int count,
|
|
u_char *red, u_char *green, u_char *blue, u_char *trans)
|
|
{
|
|
u_char *r;
|
|
u_char *g;
|
|
u_char *b;
|
|
|
|
if ((base < 0) || (base >= 256) || (base + count > 256))
|
|
return EINVAL;
|
|
|
|
r = malloc(count*3, M_DEVBUF, M_WAITOK);
|
|
g = r + count;
|
|
b = g + count;
|
|
if (vga_save_palette2(adp, base, count, r, g, b)) {
|
|
free(r, M_DEVBUF);
|
|
return ENODEV;
|
|
}
|
|
copyout(r, red, count);
|
|
copyout(g, green, count);
|
|
copyout(b, blue, count);
|
|
if (trans != NULL) {
|
|
bzero(r, count);
|
|
copyout(r, trans, count);
|
|
}
|
|
free(r, M_DEVBUF);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
set_palette(video_adapter_t *adp, int base, int count,
|
|
u_char *red, u_char *green, u_char *blue, u_char *trans)
|
|
{
|
|
u_char *r;
|
|
u_char *g;
|
|
u_char *b;
|
|
int err;
|
|
|
|
if ((base < 0) || (base >= 256) || (base + count > 256))
|
|
return EINVAL;
|
|
|
|
r = malloc(count*3, M_DEVBUF, M_WAITOK);
|
|
g = r + count;
|
|
b = g + count;
|
|
copyin(red, r, count);
|
|
copyin(green, g, count);
|
|
copyin(blue, b, count);
|
|
err = vga_load_palette2(adp, base, count, r, g, b);
|
|
free(r, M_DEVBUF);
|
|
|
|
return (err ? ENODEV : 0);
|
|
}
|
|
|
|
static int
|
|
vga_dev_ioctl(video_adapter_t *adp, u_long cmd, caddr_t arg)
|
|
{
|
|
switch (cmd) {
|
|
case FBIO_GETWINORG: /* get frame buffer window origin */
|
|
*(u_int *)arg = 0;
|
|
return 0;
|
|
|
|
case FBIO_SETWINORG: /* set frame buffer window origin */
|
|
return ENODEV;
|
|
|
|
case FBIO_SETDISPSTART: /* set display start address */
|
|
return (set_display_start(adp,
|
|
((video_display_start_t *)arg)->x,
|
|
((video_display_start_t *)arg)->y)
|
|
? ENODEV : 0);
|
|
|
|
case FBIO_SETLINEWIDTH: /* set scan line length in pixel */
|
|
return (set_line_length(adp, *(u_int *)arg) ? ENODEV : 0);
|
|
|
|
case FBIO_GETPALETTE: /* get color palette */
|
|
return get_palette(adp, ((video_color_palette_t *)arg)->index,
|
|
((video_color_palette_t *)arg)->count,
|
|
((video_color_palette_t *)arg)->red,
|
|
((video_color_palette_t *)arg)->green,
|
|
((video_color_palette_t *)arg)->blue,
|
|
((video_color_palette_t *)arg)->transparent);
|
|
|
|
case FBIO_SETPALETTE: /* set color palette */
|
|
return set_palette(adp, ((video_color_palette_t *)arg)->index,
|
|
((video_color_palette_t *)arg)->count,
|
|
((video_color_palette_t *)arg)->red,
|
|
((video_color_palette_t *)arg)->green,
|
|
((video_color_palette_t *)arg)->blue,
|
|
((video_color_palette_t *)arg)->transparent);
|
|
|
|
case FBIOGTYPE: /* get frame buffer type info. */
|
|
((struct fbtype *)arg)->fb_type = fb_type(adp->va_type);
|
|
((struct fbtype *)arg)->fb_height = adp->va_info.vi_height;
|
|
((struct fbtype *)arg)->fb_width = adp->va_info.vi_width;
|
|
((struct fbtype *)arg)->fb_depth = adp->va_info.vi_depth;
|
|
if ((adp->va_info.vi_depth <= 1) || (adp->va_info.vi_depth > 8))
|
|
((struct fbtype *)arg)->fb_cmsize = 0;
|
|
else
|
|
((struct fbtype *)arg)->fb_cmsize = 1 << adp->va_info.vi_depth;
|
|
((struct fbtype *)arg)->fb_size = adp->va_buffer_size;
|
|
return 0;
|
|
|
|
case FBIOGETCMAP: /* get color palette */
|
|
return get_palette(adp, ((struct fbcmap *)arg)->index,
|
|
((struct fbcmap *)arg)->count,
|
|
((struct fbcmap *)arg)->red,
|
|
((struct fbcmap *)arg)->green,
|
|
((struct fbcmap *)arg)->blue, NULL);
|
|
|
|
case FBIOPUTCMAP: /* set color palette */
|
|
return set_palette(adp, ((struct fbcmap *)arg)->index,
|
|
((struct fbcmap *)arg)->count,
|
|
((struct fbcmap *)arg)->red,
|
|
((struct fbcmap *)arg)->green,
|
|
((struct fbcmap *)arg)->blue, NULL);
|
|
|
|
default:
|
|
return fb_commonioctl(adp, cmd, arg);
|
|
}
|
|
}
|
|
|
|
static void
|
|
dump_buffer(u_char *buf, size_t len)
|
|
{
|
|
int i;
|
|
|
|
for(i = 0; i < len;) {
|
|
printf("%02x ", buf[i]);
|
|
if ((++i % 16) == 0)
|
|
printf("\n");
|
|
}
|
|
}
|
|
|
|
/*
|
|
* diag():
|
|
* Print some information about the video adapter and video modes,
|
|
* with requested level of details.
|
|
*
|
|
* all adapters
|
|
*/
|
|
static int
|
|
vga_diag(video_adapter_t *adp, int level)
|
|
{
|
|
u_char *mp;
|
|
#if FB_DEBUG > 1
|
|
video_info_t info;
|
|
int i;
|
|
#endif
|
|
|
|
if (!vga_init_done)
|
|
return ENXIO;
|
|
|
|
#if FB_DEBUG > 1
|
|
#ifndef VGA_NO_BIOS
|
|
printf("vga: RTC equip. code:0x%02x, DCC code:0x%02x\n",
|
|
rtcin(RTC_EQUIPMENT), readb(BIOS_PADDRTOVADDR(0x488)));
|
|
printf("vga: CRTC:0x%x, video option:0x%02x, ",
|
|
readw(BIOS_PADDRTOVADDR(0x463)),
|
|
readb(BIOS_PADDRTOVADDR(0x487)));
|
|
printf("rows:%d, cols:%d, font height:%d\n",
|
|
readb(BIOS_PADDRTOVADDR(0x44a)),
|
|
readb(BIOS_PADDRTOVADDR(0x484)) + 1,
|
|
readb(BIOS_PADDRTOVADDR(0x485)));
|
|
#endif /* VGA_NO_BIOS */
|
|
#if !defined(VGA_NO_BIOS) && !defined(VGA_NO_MODE_CHANGE)
|
|
printf("vga: param table EGA/VGA:%p", video_mode_ptr);
|
|
printf(", CGA/MDA:%p\n", video_mode_ptr2);
|
|
printf("vga: rows_offset:%d\n", rows_offset);
|
|
#endif
|
|
#endif /* FB_DEBUG > 1 */
|
|
|
|
fb_dump_adp_info(VGA_DRIVER_NAME, adp, level);
|
|
|
|
#if FB_DEBUG > 1
|
|
if (adp->va_flags & V_ADP_MODECHANGE) {
|
|
for (i = 0; bios_vmode[i].vi_mode != EOT; ++i) {
|
|
if (bios_vmode[i].vi_mode == NA)
|
|
continue;
|
|
if (get_mode_param(bios_vmode[i].vi_mode) == NULL)
|
|
continue;
|
|
fb_dump_mode_info(VGA_DRIVER_NAME, adp, &bios_vmode[i], level);
|
|
}
|
|
} else {
|
|
vga_get_info(adp, adp->va_initial_mode, &info); /* shouldn't fail */
|
|
fb_dump_mode_info(VGA_DRIVER_NAME, adp, &info, level);
|
|
}
|
|
#endif /* FB_DEBUG > 1 */
|
|
|
|
if ((adp->va_type != KD_EGA) && (adp->va_type != KD_VGA))
|
|
return 0;
|
|
#if !defined(VGA_NO_BIOS) && !defined(VGA_NO_MODE_CHANGE)
|
|
if (video_mode_ptr == NULL)
|
|
printf("vga%d: %s: WARNING: video mode switching is not "
|
|
"fully supported on this adapter\n",
|
|
adp->va_unit, adp->va_name);
|
|
#endif
|
|
if (level <= 0)
|
|
return 0;
|
|
|
|
if (adp->va_type == KD_VGA) {
|
|
printf("VGA parameters upon power-up\n");
|
|
dump_buffer(adpstate.regs, sizeof(adpstate.regs));
|
|
printf("VGA parameters in BIOS for mode %d\n", adp->va_initial_mode);
|
|
dump_buffer(adpstate2.regs, sizeof(adpstate2.regs));
|
|
}
|
|
|
|
mp = get_mode_param(adp->va_initial_mode);
|
|
if (mp == NULL) /* this shouldn't be happening */
|
|
return 0;
|
|
printf("EGA/VGA parameters to be used for mode %d\n", adp->va_initial_mode);
|
|
dump_buffer(mp, V_MODE_PARAM_SIZE);
|
|
|
|
return 0;
|
|
}
|