1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-24 11:29:10 +00:00
freebsd/sys/alpha/tc/tcdsreg.h
Doug Rabson 19df33b637 Add support for TurboChannel alphas (DEC 3000/300 and 3000/500).
Obtained from: NetBSD
Submitted by: Andrew Gallatin <gallatin@cs.duke.edu>
1998-08-20 08:27:11 +00:00

216 lines
10 KiB
C

/* $Id$ */
/* $NetBSD: tcdsreg.h,v 1.1 1995/12/20 00:40:36 cgd Exp $ */
/*
* Copyright (c) 1994, 1995 Carnegie-Mellon University.
* All rights reserved.
*
* Authors: Keith Bostic, Chris G. Demetriou
*
* Permission to use, copy, modify and distribute this software and
* its documentation is hereby granted, provided that both the copyright
* notice and this permission notice appear in all copies of the
* software, derivative works or modified versions, and any portions
* thereof, and that both notices appear in supporting documentation.
*
* CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS "AS IS"
* CONDITION. CARNEGIE MELLON DISCLAIMS ANY LIABILITY OF ANY KIND
* FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE.
*
* Carnegie Mellon requests users of this software to return to
*
* Software Distribution Coordinator or Software.Distribution@CS.CMU.EDU
* School of Computer Science
* Carnegie Mellon University
* Pittsburgh PA 15213-3890
*
* any improvements or extensions that they make and grant Carnegie the
* rights to redistribute these changes.
*/
/*
* Offsets to the SCSI chips
*/
#define TCDS_SCSI0_OFFSET 0x080000
#define TCDS_SCSI1_OFFSET 0x080100
/*
* TCDS register offsets, bit masks.
*/
#define TCDS_CIR 0x040000 /* CIR offset */
/*
* TCDS CIR control bits.
*/
#define TCDS_CIR_GPO_0 0x00000001 /* Not used */
#define TCDS_CIR_GPO_1 0x00000002 /* Not used */
#define TCDS_CIR_GPO_2 0x00000004 /* Not used */
#define TCDS_CIR_STD 0x00000008 /* Serial transmit disable */
#define TCDS_CIR_GPI_0 0x00000010 /* Not used */
#define TCDS_CIR_GPI_1 0x00000020 /* Not used */
#define TCDS_CIR_GPI_2 0x00000040 /* Not used */
#define TCDS_CIR_GPI_3 0x00000080 /* Not used */
#define TCDS_CIR_SCSI0_DMAENA 0x00000100 /* SCSI 0 DMA enable */
#define TCDS_CIR_SCSI1_DMAENA 0x00000200 /* SCSI 1 DMA enable */
#define TCDS_CIR_SCSI0_RESET 0x00000400 /* SCSI 0 reset */
#define TCDS_CIR_SCSI1_RESET 0x00000800 /* SCSI 1 reset */
#define TCDS_CIR_SCSI0_DMA_TEST 0x00001000 /* SCSI 0 DMA buf parity test */
#define TCDS_CIR_SCSI1_DMA_TEST 0x00002000 /* SCSI 1 DMA buf parity test */
#define TCDS_CIR_DB_PAR 0x00004000 /* DB parity test mode */
#define TCDS_CIR_TC_PAR 0x00008000 /* TC parity test mode */
#define TCDS_CIR_ALLCONTROL 0x0000ffff /* all control bits */
/* TCDS CIR interrupt bits. */
#define TCDS_CIR_SCSI0_DREQ 0x00010000 /* SCSI 0 DREQ */
#define TCDS_CIR_SCSI1_DREQ 0x00020000 /* SCSI 1 DREQ */
#define TCDS_CIR_SCSI0_INT 0x00040000 /* SCSI 0 interrupt */
#define TCDS_CIR_SCSI1_INT 0x00080000 /* SCSI 1 interrupt */
#define TCDS_CIR_SCSI0_PREFETCH 0x00100000 /* SCSI 0 prefetch */
#define TCDS_CIR_SCSI1_PREFETCH 0x00200000 /* SCSI 1 prefetch */
#define TCDS_CIR_SCSI0_DMA 0x00400000 /* SCSI 0 DMA error */
#define TCDS_CIR_SCSI1_DMA 0x00800000 /* SCSI 1 DMA error */
#define TCDS_CIR_SCSI0_DB 0x01000000 /* SCSI 0 DB parity */
#define TCDS_CIR_SCSI1_DB 0x02000000 /* SCSI 1 DB parity */
#define TCDS_CIR_SCSI0_DMAB_PAR 0x04000000 /* SCSI 0 DMA buffer parity */
#define TCDS_CIR_SCSI1_DMAB_PAR 0x08000000 /* SCSI 1 DMA buffer parity */
#define TCDS_CIR_SCSI0_DMAR_PAR 0x10000000 /* SCSI 0 DMA read parity */
#define TCDS_CIR_SCSI1_DMAR_PAR 0x20000000 /* SCSI 1 DMA read parity */
#define TCDS_CIR_TCIOW_PAR 0x40000000 /* TC I/O write parity */
#define TCDS_CIR_TCIOA_PAR 0x80000000 /* TC I/O address parity */
#define TCDS_CIR_ALLINTR 0xffff0000 /* all interrupt bits */
#define TCDS_CIR_CLR(c, b) c = ((c | TCDS_CIR_ALLINTR) & ~b)
#define TCDS_CIR_SET(c, b) c = ((c | TCDS_CIR_ALLINTR) | b)
/* TCDS IMER masks and enables, for interrupts in the CIR. */
#define TCDS_IMER_SCSI0_MASK 0x04 /* SCSI 0 intr/enable mask */
#define TCDS_IMER_SCSI1_MASK 0x08 /* SCSI 1 intr/enable mask */
#define TCDS_IMER_SCSI0_ENB (TCDS_IMER_SCSI0_MASK << 16)
#define TCDS_IMER_SCSI1_ENB (TCDS_IMER_SCSI1_MASK << 16)
#define TCDS_IMER 0x040004 /* IMER offset */
#define TCDS_SCSI0_DMA_ADDR 0x041000 /* DMA address */
#define TCDS_SCSI0_DMA_INTR 0x041004 /* DMA interrupt control */
#define TCDS_SCSI0_DMA_DUD0 0x041008 /* DMA unaligned data[0] */
#define TCDS_SCSI0_DMA_DUD1 0x04100c /* DMA unaligned data[1] */
#define TCDS_SCSI1_DMA_ADDR 0x041100 /* DMA address */
#define TCDS_SCSI1_DMA_INTR 0x041104 /* DMA interrupt control */
#define TCDS_SCSI1_DMA_DUD0 0x041108 /* DMA unaligned data[0] */
#define TCDS_SCSI1_DMA_DUD1 0x04110c /* DMA unaligned data[1] */
#define TCDS_DIC_ADDRMASK 0x03 /* DMA address bits <1:0> */
#define TCDS_DIC_READ_PREFETCH 0x40 /* DMA read prefetch enable */
#define TCDS_DIC_WRITE 0x80 /* DMA write */
#define TCDS_DUD0_VALID00 0x00000001 /* byte 00 valid mask (zero) */
#define TCDS_DUD0_VALID01 0x00000002 /* byte 01 valid mask */
#define TCDS_DUD0_VALID10 0x00000004 /* byte 10 valid mask */
#define TCDS_DUD0_VALID11 0x00000008 /* byte 11 valid mask */
#define TCDS_DUD0_VALIDBITS 0x0000000f /* bits that show valid bytes */
#define TCDS_DUD1_VALID00 0x01000000 /* byte 00 valid mask */
#define TCDS_DUD1_VALID01 0x02000000 /* byte 01 valid mask */
#define TCDS_DUD1_VALID10 0x04000000 /* byte 10 valid mask */
#define TCDS_DUD1_VALID11 0x08000000 /* byte 11 valid mask (zero) */
#define TCDS_DUD1_VALIDBITS 0x0f000000 /* bits that show valid bytes */
#define TCDS_DUD_BYTE00 0x000000ff /* byte 00 mask */
#define TCDS_DUD_BYTE01 0x0000ff00 /* byte 01 mask */
#define TCDS_DUD_BYTE10 0x00ff0000 /* byte 10 mask */
#define TCDS_DUD_BYTE11 0xff000000 /* byte 11 mask */
#if 0
int tcds_scsi_iserr __P((struct dma_softc *));
int tcds_scsi_isintr __P((int, int));
void tcds_dma_disable __P((int));
void tcds_dma_enable __P((int));
void tcds_dma_init __P((struct dma_softc *, int));
void tcds_scsi_disable __P((int));
void tcds_scsi_enable __P((int));
void tcds_scsi_reset __P((int));
/*
* XXX
* Start of MACH #defines, minimal changes to port to NetBSD.
*
* The following register is the SCSI control interrupt register. It
* starts, stops and resets scsi DMA. It takes over the SCSI funtions
* that were handled by the ASIC on the 3min.
*/
#define KN15AA_SYS_SCSI 0x1d0000000
#define KN15AA_REG_SCSI_CIR (KN15AA_SYS_SCSI + 0x80000)
#define SCSI_CIR_AIOPAR 0x80000000 /* TC IO Address parity error */
#define SCSI_CIR_WDIOPAR 0x40000000 /* TC IO write data parity error */
#define SCSI_CIR_DMARPAR1 0x20000000 /* SCSI[1] TC DMA read data parity */
#define SCSI_CIR_DMARPAR0 0x10000000 /* SCSI[0] TC DMA read data parity */
#define SCSI_CIR_DMABUFPAR1 0x08000000 /* SCSI[1] DMA buffer parity error */
#define SCSI_CIR_DMABUFPAR0 0x04000000 /* SCSI[0] DMA buffer parity error */
#define SCSI_CIR_DBPAR1 0x02000000 /* SCSI[1] DB parity error */
#define SCSI_CIR_DBPAR0 0x01000000 /* SCSI[0] DB parity error */
#define SCSI_CIR_DMAERR1 0x00800000 /* SCSI[1] DMA error */
#define SCSI_CIR_DMAERR0 0x00400000 /* SCSI[0] DMA error */
#if fmm50
#define SCSI_CIR_xxx0 0x00200000 /* RESERVED */
#define SCSI_CIR_xxx1 0x00100000 /* RESERVED */
#else
#define SCSI_CIR_PREF1 0x00200000 /* 53C94 prefetch interupt */
#define SCSI_CIR_PREF0 0x00100000 /* 53C94 prefetch interupt */
#endif
#define SCSI_CIR_53C94_INT1 0x00080000 /* SCSI[1] 53C94 Interupt */
#define SCSI_CIR_53C94_INT0 0x00040000 /* SCSI[0] 53C94 Interupt */
#define SCSI_CIR_53C94_DREQ1 0x00020000 /* SCSI[1] 53C94 DREQ */
#define SCSI_CIR_53C94_DREQ0 0x00010000 /* SCSI[0] 53C94 DREQ */
#define SCSI_CIR_TC_PAR_TEST 0x00008000 /* TC parity test mode */
#define SCSI_CIR_DB_PAR_TEST 0x00004000 /* DB parity test mode */
#define SCSI_CIR_DBUF_PAR_TEST1 0x00002000 /* SCSI[1] DMA buffer parity test */
#define SCSI_CIR_DBUF_PAR_TEST0 0x00001000 /* SCSI[0] DMA buffer parity test */
#define SCSI_CIR_RESET1 0x00000800 /* SCSI[1] ~Reset,enable(0)/disable(1) */
#define SCSI_CIR_RESET0 0x00000400 /* SCSI[0] ~Reset,enable(0)/disable(1) */
#define SCSI_CIR_DMAENA1 0x00000200 /* SCSI[1] DMA enable */
#define SCSI_CIR_DMAENA0 0x00000100 /* SCSI[1] DMA enable */
#define SCSI_CIR_GPI3 0x00000080 /* General purpose input <3> */
#define SCSI_CIR_GPI2 0x00000040 /* General purpose input <2> */
#define SCSI_CIR_GPI1 0x00000020 /* General purpose input <1> */
#define SCSI_CIR_GPI0 0x00000010 /* General purpose input <0> */
#define SCSI_CIR_TXDIS 0x00000008 /* TXDIS- serial transmit disable */
#define SCSI_CIR_GPO2 0x00000004 /* General purpose output <2> */
#define SCSI_CIR_GPO1 0x00000002 /* General purpose output <1> */
#define SCSI_CIR_GPO0 0x00000001 /* General purpose output <0> */
#define SCSI_CIR_ERROR (SCSI_CIR_AIOPAR | SCSI_CIR_WDIOPAR | SCSI_CIR_DMARPAR1 | SCSI_CIR_DMARPAR0 | SCSI_CIR_DMABUFPAR1 | SCSI_CIR_DMABUFPAR0 | SCSI_CIR_DBPAR1 |SCSI_CIR_DBPAR0 | SCSI_CIR_DMAERR1 | SCSI_CIR_DMAERR0 )
#define KN15AA_REG_SCSI_DMAPTR0 (KN15AA_SYS_SCSI + 0x82000)
#define KN15AA_REG_SCSI_DMAPTR1 (KN15AA_SYS_SCSI + 0x82200)
#define KN15AA_REG_SCSI_DIC0 (KN15AA_SYS_SCSI + 0x82008)
#define KN15AA_REG_SCSI_DIC1 (KN15AA_SYS_SCSI + 0x82208)
#define SCSI_DIC_DMADIR 0x00000080 /* DMA direction read(0)/write(1) */
#define SCSI_DIC_PREFENA 0x00000040 /* DMA read prefetch dis(0)/ena(1) */
#define SCSI_DIC_DMAADDR1 0x00000002 /* DMA address <1> */
#define SCSI_DIC_DMAADDR0 0x00000001 /* DMA address <0> */
#define SCSI_DIC_ADDR_MASK (SCSI_DIC_DMAADDR0 |SCSI_DIC_DMAADDR1)
#define KN15AA_REG_SCSI_94REG0 (KN15AA_SYS_SCSI + 0x100000)
#define KN15AA_REG_SCSI_94REG1 (KN15AA_SYS_SCSI + 0x100200)
#define KN15AA_REG_SCSI_IMER (KN15AA_SYS_SCSI + 0x80008)
/* these are the bits that were unalligned at the beginning of the dma */
#define KN15AA_REG_SCSI_DUDB0 (KN15AA_SYS_SCSI + 0x82010)
#define KN15AA_REG_SCSI_DUDB1 (KN15AA_SYS_SCSI + 0x82210)
# define SCSI_DUDB_MASK01 0x00000001 /* Mask bit for byte[01] */
# define SCSI_DUDB_MASK10 0x00000002 /* Mask bit for byte[10] */
# define SCSI_DUDB_MASK11 0x00000004 /* Mask bit for byte[11] */
/* these are the bits that were unalligned at the end of the dma */
#define KN15AA_REG_SCSI_DUDE0 (KN15AA_SYS_SCSI + 0x82018)
#define KN15AA_REG_SCSI_DUDE1 (KN15AA_SYS_SCSI + 0x82218)
# define SCSI_DUDE_MASK00 0x1000000 /* Mask bit for byte[00] */
# define SCSI_DUDE_MASK01 0x2000000 /* Mask bit for byte[01] */
# define SCSI_DUDE_MASK10 0x4000000 /* Mask bit for byte[10] */
#define SCSI_CIR phystok0seg(KN15AA_REG_SCSI_CIR)
#define SCSI_IMER phystok0seg(KN15AA_REG_SCSI_IMER)
#endif