1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-17 10:26:15 +00:00
freebsd/sys/dev/mii/jmphyreg.h
2008-05-27 01:16:40 +00:00

109 lines
3.8 KiB
C

/*-
* Copyright (c) 2008, Pyun YongHyeon
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice unmodified, this list of conditions, and the following
* disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef _DEV_MII_JMPHYREG_H_
#define _DEV_MII_JMPHYREG_H_
/*
* Registers for the JMicron JMC250 Gigabit PHY.
*/
/* PHY specific status register. */
#define JMPHY_SSR 0x11
#define JMPHY_SSR_SPEED_1000 0x8000
#define JMPHY_SSR_SPEED_100 0x4000
#define JMPHY_SSR_SPEED_10 0x0000
#define JMPHY_SSR_SPEED_MASK 0xC000
#define JMPHY_SSR_DUPLEX 0x2000
#define JMPHY_SSR_SPD_DPLX_RESOLVED 0x0800
#define JMPHY_SSR_LINK_UP 0x0400
#define JMPHY_SSR_MDI_XOVER 0x0040
#define JMPHY_SSR_INV_POLARITY 0x0002
/* PHY specific cable length status register. */
#define JMPHY_SCL 0x17
#define JMPHY_SCL_CHAN_D_MASK 0xF000
#define JMPHY_SCL_CHAN_C_MASK 0x0F00
#define JMPHY_SCL_CHAN_B_MASK 0x00F0
#define JMPHY_SCL_CHAN_A_MASK 0x000F
#define JMPHY_SCL_LEN_35 0
#define JMPHY_SCL_LEN_40 1
#define JMPHY_SCL_LEN_50 2
#define JMPHY_SCL_LEN_60 3
#define JMPHY_SCL_LEN_70 4
#define JMPHY_SCL_LEN_80 5
#define JMPHY_SCL_LEN_90 6
#define JMPHY_SCL_LEN_100 7
#define JMPHY_SCL_LEN_110 8
#define JMPHY_SCL_LEN_120 9
#define JMPHY_SCL_LEN_130 10
#define JMPHY_SCL_LEN_140 11
#define JMPHY_SCL_LEN_150 12
#define JMPHY_SCL_LEN_160 13
#define JMPHY_SCL_LEN_170 14
#define JMPHY_SCL_RSVD 15
/* PHY specific LED control register 1. */
#define JMPHY_LED_CTL1 0x18
#define JMPHY_LED_BLINK_42MS 0x0000
#define JMPHY_LED_BLINK_84MS 0x2000
#define JMPHY_LED_BLINK_170MS 0x4000
#define JMPHY_LED_BLINK_340MS 0x6000
#define JMPHY_LED_BLINK_670MS 0x8000
#define JMPHY_LED_BLINK_MASK 0xE000
#define JMPHY_LED_FLP_GAP_MASK 0x1F00
#define JMPHY_LED_FLP_GAP_DEFULT 0x1000
#define JMPHY_LED2_POLARITY_MASK 0x0030
#define JMPHY_LED1_POLARITY_MASK 0x000C
#define JMPHY_LED0_POLARITY_MASK 0x0003
#define JMPHY_LED_ON_LO_OFF_HI 0
#define JMPHY_LED_ON_HI_OFF_HI 1
#define JMPHY_LED_ON_LO_OFF_TS 2
#define JMPHY_LED_ON_HI_OFF_TS 3
/* PHY specific LED control register 2. */
#define JMPHY_LED_CTL2 0x19
#define JMPHY_LED_NO_STRETCH 0x0000
#define JMPHY_LED_STRETCH_42MS 0x2000
#define JMPHY_LED_STRETCH_84MS 0x4000
#define JMPHY_LED_STRETCH_170MS 0x6000
#define JMPHY_LED_STRETCH_340MS 0x8000
#define JMPHY_LED_STRETCH_670MS 0xB000
#define JMPHY_LED_STRETCH_1300MS 0xC000
#define JMPHY_LED_STRETCH_2700MS 0xE000
#define JMPHY_LED2_MODE_MASK 0x0F00
#define JMPHY_LED1_MODE_MASK 0x00F0
#define JMPHY_LED0_MODE_MASK 0x000F
/* PHY specific test mode control register. */
#define JMPHY_TMCTL 0x1A
#define JMPHY_TMCTL_SLEEP_ENB 0x1000
#endif /* _DEV_MII_JMPHYREG_H_ */