mirror of
https://git.FreeBSD.org/src.git
synced 2024-12-26 11:47:31 +00:00
6ab6bfe32f
- bear with me, there are lots of white space changes, I would not
do them, but I am a mere consumer of this stuff and if these drivers
are to stay in shape they need to be taken.
em driver changes: support for the new i217/i218 interfaces
igb driver changes:
- TX mq start has a quick turnaround to the stack
- Link/media handling improvement
- When link status changes happen the current flow control state
will now be displayed.
- A few white space/style changes.
lem driver changes:
- the shared code uncovered a bogus write to the RLPML register
(which does not exist in this hardware) in the vlan code,this
is removed.
575 lines
16 KiB
C
575 lines
16 KiB
C
/******************************************************************************
|
|
|
|
Copyright (c) 2001-2013, Intel Corporation
|
|
All rights reserved.
|
|
|
|
Redistribution and use in source and binary forms, with or without
|
|
modification, are permitted provided that the following conditions are met:
|
|
|
|
1. Redistributions of source code must retain the above copyright notice,
|
|
this list of conditions and the following disclaimer.
|
|
|
|
2. Redistributions in binary form must reproduce the above copyright
|
|
notice, this list of conditions and the following disclaimer in the
|
|
documentation and/or other materials provided with the distribution.
|
|
|
|
3. Neither the name of the Intel Corporation nor the names of its
|
|
contributors may be used to endorse or promote products derived from
|
|
this software without specific prior written permission.
|
|
|
|
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
|
|
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
POSSIBILITY OF SUCH DAMAGE.
|
|
|
|
******************************************************************************/
|
|
/*$FreeBSD$*/
|
|
|
|
#include "e1000_api.h"
|
|
|
|
/**
|
|
* e1000_calculate_checksum - Calculate checksum for buffer
|
|
* @buffer: pointer to EEPROM
|
|
* @length: size of EEPROM to calculate a checksum for
|
|
*
|
|
* Calculates the checksum for some buffer on a specified length. The
|
|
* checksum calculated is returned.
|
|
**/
|
|
u8 e1000_calculate_checksum(u8 *buffer, u32 length)
|
|
{
|
|
u32 i;
|
|
u8 sum = 0;
|
|
|
|
DEBUGFUNC("e1000_calculate_checksum");
|
|
|
|
if (!buffer)
|
|
return 0;
|
|
|
|
for (i = 0; i < length; i++)
|
|
sum += buffer[i];
|
|
|
|
return (u8) (0 - sum);
|
|
}
|
|
|
|
/**
|
|
* e1000_mng_enable_host_if_generic - Checks host interface is enabled
|
|
* @hw: pointer to the HW structure
|
|
*
|
|
* Returns E1000_success upon success, else E1000_ERR_HOST_INTERFACE_COMMAND
|
|
*
|
|
* This function checks whether the HOST IF is enabled for command operation
|
|
* and also checks whether the previous command is completed. It busy waits
|
|
* in case of previous command is not completed.
|
|
**/
|
|
s32 e1000_mng_enable_host_if_generic(struct e1000_hw *hw)
|
|
{
|
|
u32 hicr;
|
|
u8 i;
|
|
|
|
DEBUGFUNC("e1000_mng_enable_host_if_generic");
|
|
|
|
if (!hw->mac.arc_subsystem_valid) {
|
|
DEBUGOUT("ARC subsystem not valid.\n");
|
|
return -E1000_ERR_HOST_INTERFACE_COMMAND;
|
|
}
|
|
|
|
/* Check that the host interface is enabled. */
|
|
hicr = E1000_READ_REG(hw, E1000_HICR);
|
|
if (!(hicr & E1000_HICR_EN)) {
|
|
DEBUGOUT("E1000_HOST_EN bit disabled.\n");
|
|
return -E1000_ERR_HOST_INTERFACE_COMMAND;
|
|
}
|
|
/* check the previous command is completed */
|
|
for (i = 0; i < E1000_MNG_DHCP_COMMAND_TIMEOUT; i++) {
|
|
hicr = E1000_READ_REG(hw, E1000_HICR);
|
|
if (!(hicr & E1000_HICR_C))
|
|
break;
|
|
msec_delay_irq(1);
|
|
}
|
|
|
|
if (i == E1000_MNG_DHCP_COMMAND_TIMEOUT) {
|
|
DEBUGOUT("Previous command timeout failed .\n");
|
|
return -E1000_ERR_HOST_INTERFACE_COMMAND;
|
|
}
|
|
|
|
return E1000_SUCCESS;
|
|
}
|
|
|
|
/**
|
|
* e1000_check_mng_mode_generic - Generic check management mode
|
|
* @hw: pointer to the HW structure
|
|
*
|
|
* Reads the firmware semaphore register and returns TRUE (>0) if
|
|
* manageability is enabled, else FALSE (0).
|
|
**/
|
|
bool e1000_check_mng_mode_generic(struct e1000_hw *hw)
|
|
{
|
|
u32 fwsm = E1000_READ_REG(hw, E1000_FWSM);
|
|
|
|
DEBUGFUNC("e1000_check_mng_mode_generic");
|
|
|
|
|
|
return (fwsm & E1000_FWSM_MODE_MASK) ==
|
|
(E1000_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT);
|
|
}
|
|
|
|
/**
|
|
* e1000_enable_tx_pkt_filtering_generic - Enable packet filtering on Tx
|
|
* @hw: pointer to the HW structure
|
|
*
|
|
* Enables packet filtering on transmit packets if manageability is enabled
|
|
* and host interface is enabled.
|
|
**/
|
|
bool e1000_enable_tx_pkt_filtering_generic(struct e1000_hw *hw)
|
|
{
|
|
struct e1000_host_mng_dhcp_cookie *hdr = &hw->mng_cookie;
|
|
u32 *buffer = (u32 *)&hw->mng_cookie;
|
|
u32 offset;
|
|
s32 ret_val, hdr_csum, csum;
|
|
u8 i, len;
|
|
|
|
DEBUGFUNC("e1000_enable_tx_pkt_filtering_generic");
|
|
|
|
hw->mac.tx_pkt_filtering = TRUE;
|
|
|
|
/* No manageability, no filtering */
|
|
if (!hw->mac.ops.check_mng_mode(hw)) {
|
|
hw->mac.tx_pkt_filtering = FALSE;
|
|
return hw->mac.tx_pkt_filtering;
|
|
}
|
|
|
|
/* If we can't read from the host interface for whatever
|
|
* reason, disable filtering.
|
|
*/
|
|
ret_val = e1000_mng_enable_host_if_generic(hw);
|
|
if (ret_val != E1000_SUCCESS) {
|
|
hw->mac.tx_pkt_filtering = FALSE;
|
|
return hw->mac.tx_pkt_filtering;
|
|
}
|
|
|
|
/* Read in the header. Length and offset are in dwords. */
|
|
len = E1000_MNG_DHCP_COOKIE_LENGTH >> 2;
|
|
offset = E1000_MNG_DHCP_COOKIE_OFFSET >> 2;
|
|
for (i = 0; i < len; i++)
|
|
*(buffer + i) = E1000_READ_REG_ARRAY_DWORD(hw, E1000_HOST_IF,
|
|
offset + i);
|
|
hdr_csum = hdr->checksum;
|
|
hdr->checksum = 0;
|
|
csum = e1000_calculate_checksum((u8 *)hdr,
|
|
E1000_MNG_DHCP_COOKIE_LENGTH);
|
|
/* If either the checksums or signature don't match, then
|
|
* the cookie area isn't considered valid, in which case we
|
|
* take the safe route of assuming Tx filtering is enabled.
|
|
*/
|
|
if ((hdr_csum != csum) || (hdr->signature != E1000_IAMT_SIGNATURE)) {
|
|
hw->mac.tx_pkt_filtering = TRUE;
|
|
return hw->mac.tx_pkt_filtering;
|
|
}
|
|
|
|
/* Cookie area is valid, make the final check for filtering. */
|
|
if (!(hdr->status & E1000_MNG_DHCP_COOKIE_STATUS_PARSING))
|
|
hw->mac.tx_pkt_filtering = FALSE;
|
|
|
|
return hw->mac.tx_pkt_filtering;
|
|
}
|
|
|
|
/**
|
|
* e1000_mng_write_cmd_header_generic - Writes manageability command header
|
|
* @hw: pointer to the HW structure
|
|
* @hdr: pointer to the host interface command header
|
|
*
|
|
* Writes the command header after does the checksum calculation.
|
|
**/
|
|
s32 e1000_mng_write_cmd_header_generic(struct e1000_hw *hw,
|
|
struct e1000_host_mng_command_header *hdr)
|
|
{
|
|
u16 i, length = sizeof(struct e1000_host_mng_command_header);
|
|
|
|
DEBUGFUNC("e1000_mng_write_cmd_header_generic");
|
|
|
|
/* Write the whole command header structure with new checksum. */
|
|
|
|
hdr->checksum = e1000_calculate_checksum((u8 *)hdr, length);
|
|
|
|
length >>= 2;
|
|
/* Write the relevant command block into the ram area. */
|
|
for (i = 0; i < length; i++) {
|
|
E1000_WRITE_REG_ARRAY_DWORD(hw, E1000_HOST_IF, i,
|
|
*((u32 *) hdr + i));
|
|
E1000_WRITE_FLUSH(hw);
|
|
}
|
|
|
|
return E1000_SUCCESS;
|
|
}
|
|
|
|
/**
|
|
* e1000_mng_host_if_write_generic - Write to the manageability host interface
|
|
* @hw: pointer to the HW structure
|
|
* @buffer: pointer to the host interface buffer
|
|
* @length: size of the buffer
|
|
* @offset: location in the buffer to write to
|
|
* @sum: sum of the data (not checksum)
|
|
*
|
|
* This function writes the buffer content at the offset given on the host if.
|
|
* It also does alignment considerations to do the writes in most efficient
|
|
* way. Also fills up the sum of the buffer in *buffer parameter.
|
|
**/
|
|
s32 e1000_mng_host_if_write_generic(struct e1000_hw *hw, u8 *buffer,
|
|
u16 length, u16 offset, u8 *sum)
|
|
{
|
|
u8 *tmp;
|
|
u8 *bufptr = buffer;
|
|
u32 data = 0;
|
|
u16 remaining, i, j, prev_bytes;
|
|
|
|
DEBUGFUNC("e1000_mng_host_if_write_generic");
|
|
|
|
/* sum = only sum of the data and it is not checksum */
|
|
|
|
if (length == 0 || offset + length > E1000_HI_MAX_MNG_DATA_LENGTH)
|
|
return -E1000_ERR_PARAM;
|
|
|
|
tmp = (u8 *)&data;
|
|
prev_bytes = offset & 0x3;
|
|
offset >>= 2;
|
|
|
|
if (prev_bytes) {
|
|
data = E1000_READ_REG_ARRAY_DWORD(hw, E1000_HOST_IF, offset);
|
|
for (j = prev_bytes; j < sizeof(u32); j++) {
|
|
*(tmp + j) = *bufptr++;
|
|
*sum += *(tmp + j);
|
|
}
|
|
E1000_WRITE_REG_ARRAY_DWORD(hw, E1000_HOST_IF, offset, data);
|
|
length -= j - prev_bytes;
|
|
offset++;
|
|
}
|
|
|
|
remaining = length & 0x3;
|
|
length -= remaining;
|
|
|
|
/* Calculate length in DWORDs */
|
|
length >>= 2;
|
|
|
|
/* The device driver writes the relevant command block into the
|
|
* ram area.
|
|
*/
|
|
for (i = 0; i < length; i++) {
|
|
for (j = 0; j < sizeof(u32); j++) {
|
|
*(tmp + j) = *bufptr++;
|
|
*sum += *(tmp + j);
|
|
}
|
|
|
|
E1000_WRITE_REG_ARRAY_DWORD(hw, E1000_HOST_IF, offset + i,
|
|
data);
|
|
}
|
|
if (remaining) {
|
|
for (j = 0; j < sizeof(u32); j++) {
|
|
if (j < remaining)
|
|
*(tmp + j) = *bufptr++;
|
|
else
|
|
*(tmp + j) = 0;
|
|
|
|
*sum += *(tmp + j);
|
|
}
|
|
E1000_WRITE_REG_ARRAY_DWORD(hw, E1000_HOST_IF, offset + i,
|
|
data);
|
|
}
|
|
|
|
return E1000_SUCCESS;
|
|
}
|
|
|
|
/**
|
|
* e1000_mng_write_dhcp_info_generic - Writes DHCP info to host interface
|
|
* @hw: pointer to the HW structure
|
|
* @buffer: pointer to the host interface
|
|
* @length: size of the buffer
|
|
*
|
|
* Writes the DHCP information to the host interface.
|
|
**/
|
|
s32 e1000_mng_write_dhcp_info_generic(struct e1000_hw *hw, u8 *buffer,
|
|
u16 length)
|
|
{
|
|
struct e1000_host_mng_command_header hdr;
|
|
s32 ret_val;
|
|
u32 hicr;
|
|
|
|
DEBUGFUNC("e1000_mng_write_dhcp_info_generic");
|
|
|
|
hdr.command_id = E1000_MNG_DHCP_TX_PAYLOAD_CMD;
|
|
hdr.command_length = length;
|
|
hdr.reserved1 = 0;
|
|
hdr.reserved2 = 0;
|
|
hdr.checksum = 0;
|
|
|
|
/* Enable the host interface */
|
|
ret_val = e1000_mng_enable_host_if_generic(hw);
|
|
if (ret_val)
|
|
return ret_val;
|
|
|
|
/* Populate the host interface with the contents of "buffer". */
|
|
ret_val = e1000_mng_host_if_write_generic(hw, buffer, length,
|
|
sizeof(hdr), &(hdr.checksum));
|
|
if (ret_val)
|
|
return ret_val;
|
|
|
|
/* Write the manageability command header */
|
|
ret_val = e1000_mng_write_cmd_header_generic(hw, &hdr);
|
|
if (ret_val)
|
|
return ret_val;
|
|
|
|
/* Tell the ARC a new command is pending. */
|
|
hicr = E1000_READ_REG(hw, E1000_HICR);
|
|
E1000_WRITE_REG(hw, E1000_HICR, hicr | E1000_HICR_C);
|
|
|
|
return E1000_SUCCESS;
|
|
}
|
|
|
|
/**
|
|
* e1000_enable_mng_pass_thru - Check if management passthrough is needed
|
|
* @hw: pointer to the HW structure
|
|
*
|
|
* Verifies the hardware needs to leave interface enabled so that frames can
|
|
* be directed to and from the management interface.
|
|
**/
|
|
bool e1000_enable_mng_pass_thru(struct e1000_hw *hw)
|
|
{
|
|
u32 manc;
|
|
u32 fwsm, factps;
|
|
|
|
DEBUGFUNC("e1000_enable_mng_pass_thru");
|
|
|
|
if (!hw->mac.asf_firmware_present)
|
|
return FALSE;
|
|
|
|
manc = E1000_READ_REG(hw, E1000_MANC);
|
|
|
|
if (!(manc & E1000_MANC_RCV_TCO_EN))
|
|
return FALSE;
|
|
|
|
if (hw->mac.has_fwsm) {
|
|
fwsm = E1000_READ_REG(hw, E1000_FWSM);
|
|
factps = E1000_READ_REG(hw, E1000_FACTPS);
|
|
|
|
if (!(factps & E1000_FACTPS_MNGCG) &&
|
|
((fwsm & E1000_FWSM_MODE_MASK) ==
|
|
(e1000_mng_mode_pt << E1000_FWSM_MODE_SHIFT)))
|
|
return TRUE;
|
|
} else if ((hw->mac.type == e1000_82574) ||
|
|
(hw->mac.type == e1000_82583)) {
|
|
u16 data;
|
|
|
|
factps = E1000_READ_REG(hw, E1000_FACTPS);
|
|
e1000_read_nvm(hw, NVM_INIT_CONTROL2_REG, 1, &data);
|
|
|
|
if (!(factps & E1000_FACTPS_MNGCG) &&
|
|
((data & E1000_NVM_INIT_CTRL2_MNGM) ==
|
|
(e1000_mng_mode_pt << 13)))
|
|
return TRUE;
|
|
} else if ((manc & E1000_MANC_SMBUS_EN) &&
|
|
!(manc & E1000_MANC_ASF_EN)) {
|
|
return TRUE;
|
|
}
|
|
|
|
return FALSE;
|
|
}
|
|
|
|
/**
|
|
* e1000_host_interface_command - Writes buffer to host interface
|
|
* @hw: pointer to the HW structure
|
|
* @buffer: contains a command to write
|
|
* @length: the byte length of the buffer, must be multiple of 4 bytes
|
|
*
|
|
* Writes a buffer to the Host Interface. Upon success, returns E1000_SUCCESS
|
|
* else returns E1000_ERR_HOST_INTERFACE_COMMAND.
|
|
**/
|
|
s32 e1000_host_interface_command(struct e1000_hw *hw, u8 *buffer, u32 length)
|
|
{
|
|
u32 hicr, i;
|
|
|
|
DEBUGFUNC("e1000_host_interface_command");
|
|
|
|
if (!(hw->mac.arc_subsystem_valid)) {
|
|
DEBUGOUT("Hardware doesn't support host interface command.\n");
|
|
return E1000_SUCCESS;
|
|
}
|
|
|
|
if (!hw->mac.asf_firmware_present) {
|
|
DEBUGOUT("Firmware is not present.\n");
|
|
return E1000_SUCCESS;
|
|
}
|
|
|
|
if (length == 0 || length & 0x3 ||
|
|
length > E1000_HI_MAX_BLOCK_BYTE_LENGTH) {
|
|
DEBUGOUT("Buffer length failure.\n");
|
|
return -E1000_ERR_HOST_INTERFACE_COMMAND;
|
|
}
|
|
|
|
/* Check that the host interface is enabled. */
|
|
hicr = E1000_READ_REG(hw, E1000_HICR);
|
|
if (!(hicr & E1000_HICR_EN)) {
|
|
DEBUGOUT("E1000_HOST_EN bit disabled.\n");
|
|
return -E1000_ERR_HOST_INTERFACE_COMMAND;
|
|
}
|
|
|
|
/* Calculate length in DWORDs */
|
|
length >>= 2;
|
|
|
|
/* The device driver writes the relevant command block
|
|
* into the ram area.
|
|
*/
|
|
for (i = 0; i < length; i++)
|
|
E1000_WRITE_REG_ARRAY_DWORD(hw, E1000_HOST_IF, i,
|
|
*((u32 *)buffer + i));
|
|
|
|
/* Setting this bit tells the ARC that a new command is pending. */
|
|
E1000_WRITE_REG(hw, E1000_HICR, hicr | E1000_HICR_C);
|
|
|
|
for (i = 0; i < E1000_HI_COMMAND_TIMEOUT; i++) {
|
|
hicr = E1000_READ_REG(hw, E1000_HICR);
|
|
if (!(hicr & E1000_HICR_C))
|
|
break;
|
|
msec_delay(1);
|
|
}
|
|
|
|
/* Check command successful completion. */
|
|
if (i == E1000_HI_COMMAND_TIMEOUT ||
|
|
(!(E1000_READ_REG(hw, E1000_HICR) & E1000_HICR_SV))) {
|
|
DEBUGOUT("Command has failed with no status valid.\n");
|
|
return -E1000_ERR_HOST_INTERFACE_COMMAND;
|
|
}
|
|
|
|
for (i = 0; i < length; i++)
|
|
*((u32 *)buffer + i) = E1000_READ_REG_ARRAY_DWORD(hw,
|
|
E1000_HOST_IF,
|
|
i);
|
|
|
|
return E1000_SUCCESS;
|
|
}
|
|
/**
|
|
* e1000_load_firmware - Writes proxy FW code buffer to host interface
|
|
* and execute.
|
|
* @hw: pointer to the HW structure
|
|
* @buffer: contains a firmware to write
|
|
* @length: the byte length of the buffer, must be multiple of 4 bytes
|
|
*
|
|
* Upon success returns E1000_SUCCESS, returns E1000_ERR_CONFIG if not enabled
|
|
* in HW else returns E1000_ERR_HOST_INTERFACE_COMMAND.
|
|
**/
|
|
s32 e1000_load_firmware(struct e1000_hw *hw, u8 *buffer, u32 length)
|
|
{
|
|
u32 hicr, hibba, fwsm, icr, i;
|
|
|
|
DEBUGFUNC("e1000_load_firmware");
|
|
|
|
if (hw->mac.type < e1000_i210) {
|
|
DEBUGOUT("Hardware doesn't support loading FW by the driver\n");
|
|
return -E1000_ERR_CONFIG;
|
|
}
|
|
|
|
/* Check that the host interface is enabled. */
|
|
hicr = E1000_READ_REG(hw, E1000_HICR);
|
|
if (!(hicr & E1000_HICR_EN)) {
|
|
DEBUGOUT("E1000_HOST_EN bit disabled.\n");
|
|
return -E1000_ERR_CONFIG;
|
|
}
|
|
if (!(hicr & E1000_HICR_MEMORY_BASE_EN)) {
|
|
DEBUGOUT("E1000_HICR_MEMORY_BASE_EN bit disabled.\n");
|
|
return -E1000_ERR_CONFIG;
|
|
}
|
|
|
|
if (length == 0 || length & 0x3 || length > E1000_HI_FW_MAX_LENGTH) {
|
|
DEBUGOUT("Buffer length failure.\n");
|
|
return -E1000_ERR_INVALID_ARGUMENT;
|
|
}
|
|
|
|
/* Clear notification from ROM-FW by reading ICR register */
|
|
icr = E1000_READ_REG(hw, E1000_ICR_V2);
|
|
|
|
/* Reset ROM-FW */
|
|
hicr = E1000_READ_REG(hw, E1000_HICR);
|
|
hicr |= E1000_HICR_FW_RESET_ENABLE;
|
|
E1000_WRITE_REG(hw, E1000_HICR, hicr);
|
|
hicr |= E1000_HICR_FW_RESET;
|
|
E1000_WRITE_REG(hw, E1000_HICR, hicr);
|
|
E1000_WRITE_FLUSH(hw);
|
|
|
|
/* Wait till MAC notifies about its readiness after ROM-FW reset */
|
|
for (i = 0; i < (E1000_HI_COMMAND_TIMEOUT * 2); i++) {
|
|
icr = E1000_READ_REG(hw, E1000_ICR_V2);
|
|
if (icr & E1000_ICR_MNG)
|
|
break;
|
|
msec_delay(1);
|
|
}
|
|
|
|
/* Check for timeout */
|
|
if (i == E1000_HI_COMMAND_TIMEOUT) {
|
|
DEBUGOUT("FW reset failed.\n");
|
|
return -E1000_ERR_HOST_INTERFACE_COMMAND;
|
|
}
|
|
|
|
/* Wait till MAC is ready to accept new FW code */
|
|
for (i = 0; i < E1000_HI_COMMAND_TIMEOUT; i++) {
|
|
fwsm = E1000_READ_REG(hw, E1000_FWSM);
|
|
if ((fwsm & E1000_FWSM_FW_VALID) &&
|
|
((fwsm & E1000_FWSM_MODE_MASK) >> E1000_FWSM_MODE_SHIFT ==
|
|
E1000_FWSM_HI_EN_ONLY_MODE))
|
|
break;
|
|
msec_delay(1);
|
|
}
|
|
|
|
/* Check for timeout */
|
|
if (i == E1000_HI_COMMAND_TIMEOUT) {
|
|
DEBUGOUT("FW reset failed.\n");
|
|
return -E1000_ERR_HOST_INTERFACE_COMMAND;
|
|
}
|
|
|
|
/* Calculate length in DWORDs */
|
|
length >>= 2;
|
|
|
|
/* The device driver writes the relevant FW code block
|
|
* into the ram area in DWORDs via 1kB ram addressing window.
|
|
*/
|
|
for (i = 0; i < length; i++) {
|
|
if (!(i % E1000_HI_FW_BLOCK_DWORD_LENGTH)) {
|
|
/* Point to correct 1kB ram window */
|
|
hibba = E1000_HI_FW_BASE_ADDRESS +
|
|
((E1000_HI_FW_BLOCK_DWORD_LENGTH << 2) *
|
|
(i / E1000_HI_FW_BLOCK_DWORD_LENGTH));
|
|
|
|
E1000_WRITE_REG(hw, E1000_HIBBA, hibba);
|
|
}
|
|
|
|
E1000_WRITE_REG_ARRAY_DWORD(hw, E1000_HOST_IF,
|
|
i % E1000_HI_FW_BLOCK_DWORD_LENGTH,
|
|
*((u32 *)buffer + i));
|
|
}
|
|
|
|
/* Setting this bit tells the ARC that a new FW is ready to execute. */
|
|
hicr = E1000_READ_REG(hw, E1000_HICR);
|
|
E1000_WRITE_REG(hw, E1000_HICR, hicr | E1000_HICR_C);
|
|
|
|
for (i = 0; i < E1000_HI_COMMAND_TIMEOUT; i++) {
|
|
hicr = E1000_READ_REG(hw, E1000_HICR);
|
|
if (!(hicr & E1000_HICR_C))
|
|
break;
|
|
msec_delay(1);
|
|
}
|
|
|
|
/* Check for successful FW start. */
|
|
if (i == E1000_HI_COMMAND_TIMEOUT) {
|
|
DEBUGOUT("New FW did not start within timeout period.\n");
|
|
return -E1000_ERR_HOST_INTERFACE_COMMAND;
|
|
}
|
|
|
|
return E1000_SUCCESS;
|
|
}
|
|
|
|
|