mirror of
https://git.FreeBSD.org/src.git
synced 2024-12-19 10:53:58 +00:00
dc4ee6ca91
make use of it where possible. This primarily brings in support for newer hardware, and FreeBSD is not yet able to support the abundance of IRQs on new hardware and many features in the Ethernet driver. Because of the changes to IRQs in the Simple Executive, we have to maintain our own list of Octeon IRQs now, which probably can be pared-down and be specific to the CIU interrupt unit soon, and when other interrupt mechanisms are added they can maintain their own definitions. Remove unmasking of interrupts from within the UART device now that the function used is no longer present in the Simple Executive. The unmasking seems to have been gratuitous as this is more properly handled by the buses above the UART device, and seems to work on that basis.
839 lines
31 KiB
C
839 lines
31 KiB
C
/***********************license start***************
|
|
* Copyright (c) 2003-2010 Cavium Inc. (support@cavium.com). All rights
|
|
* reserved.
|
|
*
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions are
|
|
* met:
|
|
*
|
|
* * Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
*
|
|
* * Redistributions in binary form must reproduce the above
|
|
* copyright notice, this list of conditions and the following
|
|
* disclaimer in the documentation and/or other materials provided
|
|
* with the distribution.
|
|
|
|
* * Neither the name of Cavium Inc. nor the names of
|
|
* its contributors may be used to endorse or promote products
|
|
* derived from this software without specific prior written
|
|
* permission.
|
|
|
|
* This Software, including technical data, may be subject to U.S. export control
|
|
* laws, including the U.S. Export Administration Act and its associated
|
|
* regulations, and may be subject to export or import regulations in other
|
|
* countries.
|
|
|
|
* TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE SOFTWARE IS PROVIDED "AS IS"
|
|
* AND WITH ALL FAULTS AND CAVIUM INC. MAKES NO PROMISES, REPRESENTATIONS OR
|
|
* WARRANTIES, EITHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, WITH RESPECT TO
|
|
* THE SOFTWARE, INCLUDING ITS CONDITION, ITS CONFORMITY TO ANY REPRESENTATION OR
|
|
* DESCRIPTION, OR THE EXISTENCE OF ANY LATENT OR PATENT DEFECTS, AND CAVIUM
|
|
* SPECIFICALLY DISCLAIMS ALL IMPLIED (IF ANY) WARRANTIES OF TITLE,
|
|
* MERCHANTABILITY, NONINFRINGEMENT, FITNESS FOR A PARTICULAR PURPOSE, LACK OF
|
|
* VIRUSES, ACCURACY OR COMPLETENESS, QUIET ENJOYMENT, QUIET POSSESSION OR
|
|
* CORRESPONDENCE TO DESCRIPTION. THE ENTIRE RISK ARISING OUT OF USE OR
|
|
* PERFORMANCE OF THE SOFTWARE LIES WITH YOU.
|
|
***********************license end**************************************/
|
|
|
|
|
|
/**
|
|
* @file
|
|
*
|
|
* Interface to the hardware Packet Output unit.
|
|
*
|
|
* Starting with SDK 1.7.0, the PKO output functions now support
|
|
* two types of locking. CVMX_PKO_LOCK_ATOMIC_TAG continues to
|
|
* function similarly to previous SDKs by using POW atomic tags
|
|
* to preserve ordering and exclusivity. As a new option, you
|
|
* can now pass CVMX_PKO_LOCK_CMD_QUEUE which uses a ll/sc
|
|
* memory based locking instead. This locking has the advantage
|
|
* of not affecting the tag state but doesn't preserve packet
|
|
* ordering. CVMX_PKO_LOCK_CMD_QUEUE is appropriate in most
|
|
* generic code while CVMX_PKO_LOCK_CMD_QUEUE should be used
|
|
* with hand tuned fast path code.
|
|
*
|
|
* Some of other SDK differences visible to the command command
|
|
* queuing:
|
|
* - PKO indexes are no longer stored in the FAU. A large
|
|
* percentage of the FAU register block used to be tied up
|
|
* maintaining PKO queue pointers. These are now stored in a
|
|
* global named block.
|
|
* - The PKO <b>use_locking</b> parameter can now have a global
|
|
* effect. Since all application use the same named block,
|
|
* queue locking correctly applies across all operating
|
|
* systems when using CVMX_PKO_LOCK_CMD_QUEUE.
|
|
* - PKO 3 word commands are now supported. Use
|
|
* cvmx_pko_send_packet_finish3().
|
|
*
|
|
* <hr>$Revision: 70030 $<hr>
|
|
*/
|
|
|
|
|
|
#ifndef __CVMX_PKO_H__
|
|
#define __CVMX_PKO_H__
|
|
|
|
#ifdef CVMX_BUILD_FOR_LINUX_KERNEL
|
|
#include "cvmx-config.h"
|
|
#include "cvmx-pko-defs.h"
|
|
#include <asm/octeon/cvmx-fau.h>
|
|
#include <asm/octeon/cvmx-fpa.h>
|
|
#include <asm/octeon/cvmx-pow.h>
|
|
#include <asm/octeon/cvmx-cmd-queue.h>
|
|
#include <asm/octeon/cvmx-helper.h>
|
|
#include <asm/octeon/cvmx-helper-cfg.h>
|
|
#else
|
|
# ifndef CVMX_DONT_INCLUDE_CONFIG
|
|
# include "executive-config.h"
|
|
# ifdef CVMX_ENABLE_PKO_FUNCTIONS
|
|
# include "cvmx-config.h"
|
|
# endif
|
|
# endif
|
|
#include "cvmx-fau.h"
|
|
#include "cvmx-fpa.h"
|
|
#include "cvmx-pow.h"
|
|
#include "cvmx-cmd-queue.h"
|
|
#include "cvmx-helper.h"
|
|
#include "cvmx-helper-util.h"
|
|
#include "cvmx-helper-cfg.h"
|
|
#endif
|
|
|
|
/* Adjust the command buffer size by 1 word so that in the case of using only
|
|
** two word PKO commands no command words stradle buffers. The useful values
|
|
** for this are 0 and 1. */
|
|
#define CVMX_PKO_COMMAND_BUFFER_SIZE_ADJUST (1)
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
#define CVMX_PKO_MAX_OUTPUT_QUEUES_STATIC 256
|
|
#define CVMX_PKO_MAX_OUTPUT_QUEUES ((OCTEON_IS_MODEL(OCTEON_CN31XX) || \
|
|
OCTEON_IS_MODEL(OCTEON_CN3010) || \
|
|
OCTEON_IS_MODEL(OCTEON_CN3005) || \
|
|
OCTEON_IS_MODEL(OCTEON_CN50XX)) ? \
|
|
32 : \
|
|
(OCTEON_IS_MODEL(OCTEON_CN58XX) || \
|
|
OCTEON_IS_MODEL(OCTEON_CN56XX) || \
|
|
OCTEON_IS_MODEL(OCTEON_CN52XX) || \
|
|
OCTEON_IS_MODEL(OCTEON_CN6XXX) || \
|
|
OCTEON_IS_MODEL(OCTEON_CNF7XXX)) ? \
|
|
256 : 128)
|
|
#define CVMX_PKO_NUM_OUTPUT_PORTS ((OCTEON_IS_MODEL(OCTEON_CN63XX)) ? 44 : (OCTEON_IS_MODEL(OCTEON_CN66XX) ? 46 : 40))
|
|
#define CVMX_PKO_MEM_QUEUE_PTRS_ILLEGAL_PID 63 /* use this for queues that are not used */
|
|
#define CVMX_PKO_QUEUE_STATIC_PRIORITY 9
|
|
#define CVMX_PKO_ILLEGAL_QUEUE 0xFFFF
|
|
#define CVMX_PKO_MAX_QUEUE_DEPTH 0
|
|
|
|
typedef enum
|
|
{
|
|
CVMX_PKO_SUCCESS,
|
|
CVMX_PKO_INVALID_PORT,
|
|
CVMX_PKO_INVALID_QUEUE,
|
|
CVMX_PKO_INVALID_PRIORITY,
|
|
CVMX_PKO_NO_MEMORY,
|
|
CVMX_PKO_PORT_ALREADY_SETUP,
|
|
CVMX_PKO_CMD_QUEUE_INIT_ERROR
|
|
} cvmx_pko_status_t;
|
|
|
|
/**
|
|
* This enumeration represents the differnet locking modes supported by PKO.
|
|
*/
|
|
typedef enum
|
|
{
|
|
CVMX_PKO_LOCK_NONE = 0, /**< PKO doesn't do any locking. It is the responsibility
|
|
of the application to make sure that no other core is
|
|
accessing the same queue at the same time */
|
|
CVMX_PKO_LOCK_ATOMIC_TAG = 1, /**< PKO performs an atomic tagswitch to insure exclusive
|
|
access to the output queue. This will maintain
|
|
packet ordering on output */
|
|
CVMX_PKO_LOCK_CMD_QUEUE = 2, /**< PKO uses the common command queue locks to insure
|
|
exclusive access to the output queue. This is a memory
|
|
based ll/sc. This is the most portable locking
|
|
mechanism */
|
|
} cvmx_pko_lock_t;
|
|
|
|
typedef struct
|
|
{
|
|
uint32_t packets;
|
|
uint64_t octets;
|
|
uint64_t doorbell;
|
|
} cvmx_pko_port_status_t;
|
|
|
|
/**
|
|
* This structure defines the address to use on a packet enqueue
|
|
*/
|
|
typedef union
|
|
{
|
|
uint64_t u64;
|
|
struct
|
|
{
|
|
cvmx_mips_space_t mem_space : 2; /**< Must CVMX_IO_SEG */
|
|
uint64_t reserved :13; /**< Must be zero */
|
|
uint64_t is_io : 1; /**< Must be one */
|
|
uint64_t did : 8; /**< The ID of the device on the non-coherent bus */
|
|
uint64_t reserved2 : 4; /**< Must be zero */
|
|
uint64_t reserved3 :15; /**< Must be zero */
|
|
uint64_t port : 9; /**< The hardware must have the output port in addition to the output queue */
|
|
uint64_t queue : 9; /**< The output queue to send the packet to (0-127 are legal) */
|
|
uint64_t reserved4 : 3; /**< Must be zero */
|
|
} s;
|
|
} cvmx_pko_doorbell_address_t;
|
|
|
|
/**
|
|
* Structure of the first packet output command word.
|
|
*/
|
|
typedef union
|
|
{
|
|
uint64_t u64;
|
|
struct
|
|
{
|
|
cvmx_fau_op_size_t size1 : 2; /**< The size of the reg1 operation - could be 8, 16, 32, or 64 bits */
|
|
cvmx_fau_op_size_t size0 : 2; /**< The size of the reg0 operation - could be 8, 16, 32, or 64 bits */
|
|
uint64_t subone1 : 1; /**< If set, subtract 1, if clear, subtract packet size */
|
|
uint64_t reg1 :11; /**< The register, subtract will be done if reg1 is non-zero */
|
|
uint64_t subone0 : 1; /**< If set, subtract 1, if clear, subtract packet size */
|
|
uint64_t reg0 :11; /**< The register, subtract will be done if reg0 is non-zero */
|
|
uint64_t le : 1; /**< When set, interpret segment pointer and segment bytes in little endian order */
|
|
uint64_t n2 : 1; /**< When set, packet data not allocated in L2 cache by PKO */
|
|
uint64_t wqp : 1; /**< If set and rsp is set, word3 contains a pointer to a work queue entry */
|
|
uint64_t rsp : 1; /**< If set, the hardware will send a response when done */
|
|
uint64_t gather : 1; /**< If set, the supplied pkt_ptr is really a pointer to a list of pkt_ptr's */
|
|
uint64_t ipoffp1 : 7; /**< If ipoffp1 is non zero, (ipoffp1-1) is the number of bytes to IP header,
|
|
and the hardware will calculate and insert the UDP/TCP checksum */
|
|
uint64_t ignore_i : 1; /**< If set, ignore the I bit (force to zero) from all pointer structures */
|
|
uint64_t dontfree : 1; /**< If clear, the hardware will attempt to free the buffers containing the packet */
|
|
uint64_t segs : 6; /**< The total number of segs in the packet, if gather set, also gather list length */
|
|
uint64_t total_bytes :16; /**< Including L2, but no trailing CRC */
|
|
} s;
|
|
} cvmx_pko_command_word0_t;
|
|
|
|
/* CSR typedefs have been moved to cvmx-pko-defs.h */
|
|
|
|
/**
|
|
* Definition of internal state for Packet output processing
|
|
*/
|
|
typedef struct
|
|
{
|
|
uint64_t * start_ptr; /**< ptr to start of buffer, offset kept in FAU reg */
|
|
} cvmx_pko_state_elem_t;
|
|
|
|
|
|
#ifdef CVMX_ENABLE_PKO_FUNCTIONS
|
|
/**
|
|
* Call before any other calls to initialize the packet
|
|
* output system.
|
|
*/
|
|
extern void cvmx_pko_initialize_global(void);
|
|
extern int cvmx_pko_initialize_local(void);
|
|
|
|
#endif
|
|
|
|
|
|
/**
|
|
* Enables the packet output hardware. It must already be
|
|
* configured.
|
|
*/
|
|
extern void cvmx_pko_enable(void);
|
|
|
|
|
|
/**
|
|
* Disables the packet output. Does not affect any configuration.
|
|
*/
|
|
extern void cvmx_pko_disable(void);
|
|
|
|
|
|
/**
|
|
* Shutdown and free resources required by packet output.
|
|
*/
|
|
|
|
#ifdef CVMX_ENABLE_PKO_FUNCTIONS
|
|
extern void cvmx_pko_shutdown(void);
|
|
|
|
/**
|
|
* Configure a output port and the associated queues for use.
|
|
*
|
|
* @param port Port to configure.
|
|
* @param base_queue First queue number to associate with this port.
|
|
* @param num_queues Number of queues t oassociate with this port
|
|
* @param priority Array of priority levels for each queue. Values are
|
|
* allowed to be 1-8. A value of 8 get 8 times the traffic
|
|
* of a value of 1. There must be num_queues elements in the
|
|
* array.
|
|
*/
|
|
extern cvmx_pko_status_t cvmx_pko_config_port(uint64_t port, uint64_t base_queue, uint64_t num_queues, const uint64_t priority[]);
|
|
|
|
|
|
/**
|
|
* Ring the packet output doorbell. This tells the packet
|
|
* output hardware that "len" command words have been added
|
|
* to its pending list. This command includes the required
|
|
* CVMX_SYNCWS before the doorbell ring.
|
|
*
|
|
* WARNING: This function may have to look up the proper PKO port in
|
|
* the IPD port to PKO port map, and is thus slower than calling
|
|
* cvmx_pko_doorbell_pkoid() directly if the PKO port identifier is
|
|
* known.
|
|
*
|
|
* @param ipd_port The IPD port corresponding the to pko port the packet is for
|
|
* @param queue Queue the packet is for
|
|
* @param len Length of the command in 64 bit words
|
|
*/
|
|
static inline void cvmx_pko_doorbell(uint64_t ipd_port, uint64_t queue, uint64_t len)
|
|
{
|
|
cvmx_pko_doorbell_address_t ptr;
|
|
uint64_t pko_port;
|
|
|
|
pko_port = ipd_port;
|
|
if (octeon_has_feature(OCTEON_FEATURE_PKND))
|
|
pko_port = cvmx_helper_cfg_ipd2pko_port_base(ipd_port);
|
|
|
|
ptr.u64 = 0;
|
|
ptr.s.mem_space = CVMX_IO_SEG;
|
|
ptr.s.did = CVMX_OCT_DID_PKT_SEND;
|
|
ptr.s.is_io = 1;
|
|
ptr.s.port = pko_port;
|
|
ptr.s.queue = queue;
|
|
CVMX_SYNCWS; /* Need to make sure output queue data is in DRAM before doorbell write */
|
|
cvmx_write_io(ptr.u64, len);
|
|
}
|
|
#endif
|
|
|
|
|
|
/**
|
|
* Prepare to send a packet. This may initiate a tag switch to
|
|
* get exclusive access to the output queue structure, and
|
|
* performs other prep work for the packet send operation.
|
|
*
|
|
* cvmx_pko_send_packet_finish() MUST be called after this function is called,
|
|
* and must be called with the same port/queue/use_locking arguments.
|
|
*
|
|
* The use_locking parameter allows the caller to use three
|
|
* possible locking modes.
|
|
* - CVMX_PKO_LOCK_NONE
|
|
* - PKO doesn't do any locking. It is the responsibility
|
|
* of the application to make sure that no other core
|
|
* is accessing the same queue at the same time.
|
|
* - CVMX_PKO_LOCK_ATOMIC_TAG
|
|
* - PKO performs an atomic tagswitch to insure exclusive
|
|
* access to the output queue. This will maintain
|
|
* packet ordering on output.
|
|
* - CVMX_PKO_LOCK_CMD_QUEUE
|
|
* - PKO uses the common command queue locks to insure
|
|
* exclusive access to the output queue. This is a
|
|
* memory based ll/sc. This is the most portable
|
|
* locking mechanism.
|
|
*
|
|
* NOTE: If atomic locking is used, the POW entry CANNOT be
|
|
* descheduled, as it does not contain a valid WQE pointer.
|
|
*
|
|
* @param port Port to send it on, this can be either IPD port or PKO
|
|
* port.
|
|
* @param queue Queue to use
|
|
* @param use_locking
|
|
* CVMX_PKO_LOCK_NONE, CVMX_PKO_LOCK_ATOMIC_TAG, or CVMX_PKO_LOCK_CMD_QUEUE
|
|
*/
|
|
#ifdef CVMX_ENABLE_PKO_FUNCTIONS
|
|
static inline void cvmx_pko_send_packet_prepare(uint64_t port, uint64_t queue, cvmx_pko_lock_t use_locking)
|
|
{
|
|
if (use_locking == CVMX_PKO_LOCK_ATOMIC_TAG)
|
|
{
|
|
/* Must do a full switch here to handle all cases. We use a fake WQE pointer, as the POW does
|
|
** not access this memory. The WQE pointer and group are only used if this work is descheduled,
|
|
** which is not supported by the cvmx_pko_send_packet_prepare/cvmx_pko_send_packet_finish combination.
|
|
** Note that this is a special case in which these fake values can be used - this is not a general technique.
|
|
*/
|
|
uint32_t tag = CVMX_TAG_SW_BITS_INTERNAL << CVMX_TAG_SW_SHIFT | CVMX_TAG_SUBGROUP_PKO << CVMX_TAG_SUBGROUP_SHIFT | (CVMX_TAG_SUBGROUP_MASK & queue);
|
|
cvmx_pow_tag_sw_full((cvmx_wqe_t *)cvmx_phys_to_ptr(0x80), tag, CVMX_POW_TAG_TYPE_ATOMIC, 0);
|
|
}
|
|
}
|
|
|
|
#define cvmx_pko_send_packet_prepare_pkoid cvmx_pko_send_packet_prepare
|
|
|
|
/**
|
|
* Complete packet output. cvmx_pko_send_packet_prepare() must be called exactly once before this,
|
|
* and the same parameters must be passed to both cvmx_pko_send_packet_prepare() and
|
|
* cvmx_pko_send_packet_finish().
|
|
*
|
|
* WARNING: This function may have to look up the proper PKO port in
|
|
* the IPD port to PKO port map, and is thus slower than calling
|
|
* cvmx_pko_send_packet_finish_pkoid() directly if the PKO port
|
|
* identifier is known.
|
|
*
|
|
* @param ipd_port The IPD port corresponding the to pko port the packet is for
|
|
* @param queue Queue to use
|
|
* @param pko_command
|
|
* PKO HW command word
|
|
* @param packet Packet to send
|
|
* @param use_locking
|
|
* CVMX_PKO_LOCK_NONE, CVMX_PKO_LOCK_ATOMIC_TAG, or CVMX_PKO_LOCK_CMD_QUEUE
|
|
*
|
|
* @return returns CVMX_PKO_SUCCESS on success, or error code on failure of output
|
|
*/
|
|
static inline cvmx_pko_status_t cvmx_pko_send_packet_finish(uint64_t ipd_port, uint64_t queue,
|
|
cvmx_pko_command_word0_t pko_command,
|
|
cvmx_buf_ptr_t packet, cvmx_pko_lock_t use_locking)
|
|
{
|
|
cvmx_cmd_queue_result_t result;
|
|
if (use_locking == CVMX_PKO_LOCK_ATOMIC_TAG)
|
|
cvmx_pow_tag_sw_wait();
|
|
result = cvmx_cmd_queue_write2(CVMX_CMD_QUEUE_PKO(queue),
|
|
(use_locking == CVMX_PKO_LOCK_CMD_QUEUE),
|
|
pko_command.u64,
|
|
packet.u64);
|
|
if (cvmx_likely(result == CVMX_CMD_QUEUE_SUCCESS))
|
|
{
|
|
cvmx_pko_doorbell(ipd_port, queue, 2);
|
|
return CVMX_PKO_SUCCESS;
|
|
}
|
|
else if ((result == CVMX_CMD_QUEUE_NO_MEMORY) || (result == CVMX_CMD_QUEUE_FULL))
|
|
{
|
|
return CVMX_PKO_NO_MEMORY;
|
|
}
|
|
else
|
|
{
|
|
return CVMX_PKO_INVALID_QUEUE;
|
|
}
|
|
}
|
|
|
|
|
|
/**
|
|
* Complete packet output. cvmx_pko_send_packet_prepare() must be called exactly once before this,
|
|
* and the same parameters must be passed to both cvmx_pko_send_packet_prepare() and
|
|
* cvmx_pko_send_packet_finish().
|
|
*
|
|
* WARNING: This function may have to look up the proper PKO port in
|
|
* the IPD port to PKO port map, and is thus slower than calling
|
|
* cvmx_pko_send_packet_finish3_pkoid() directly if the PKO port
|
|
* identifier is known.
|
|
*
|
|
* @param ipd_port The IPD port corresponding the to pko port the packet is for
|
|
* @param queue Queue to use
|
|
* @param pko_command
|
|
* PKO HW command word
|
|
* @param packet Packet to send
|
|
* @param addr Plysical address of a work queue entry or physical address to zero on complete.
|
|
* @param use_locking
|
|
* CVMX_PKO_LOCK_NONE, CVMX_PKO_LOCK_ATOMIC_TAG, or CVMX_PKO_LOCK_CMD_QUEUE
|
|
*
|
|
* @return returns CVMX_PKO_SUCCESS on success, or error code on failure of output
|
|
*/
|
|
static inline cvmx_pko_status_t cvmx_pko_send_packet_finish3(uint64_t ipd_port, uint64_t queue,
|
|
cvmx_pko_command_word0_t pko_command,
|
|
cvmx_buf_ptr_t packet, uint64_t addr, cvmx_pko_lock_t use_locking)
|
|
{
|
|
cvmx_cmd_queue_result_t result;
|
|
if (use_locking == CVMX_PKO_LOCK_ATOMIC_TAG)
|
|
cvmx_pow_tag_sw_wait();
|
|
result = cvmx_cmd_queue_write3(CVMX_CMD_QUEUE_PKO(queue),
|
|
(use_locking == CVMX_PKO_LOCK_CMD_QUEUE),
|
|
pko_command.u64,
|
|
packet.u64,
|
|
addr);
|
|
if (cvmx_likely(result == CVMX_CMD_QUEUE_SUCCESS))
|
|
{
|
|
cvmx_pko_doorbell(ipd_port, queue, 3);
|
|
return CVMX_PKO_SUCCESS;
|
|
}
|
|
else if ((result == CVMX_CMD_QUEUE_NO_MEMORY) || (result == CVMX_CMD_QUEUE_FULL))
|
|
{
|
|
return CVMX_PKO_NO_MEMORY;
|
|
}
|
|
else
|
|
{
|
|
return CVMX_PKO_INVALID_QUEUE;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* Get the first pko_port for the (interface, index)
|
|
*
|
|
* @param interface
|
|
* @param index
|
|
*/
|
|
extern int cvmx_pko_get_base_pko_port(int interface, int index);
|
|
|
|
/**
|
|
* Get the number of pko_ports for the (interface, index)
|
|
*
|
|
* @param interface
|
|
* @param index
|
|
*/
|
|
extern int cvmx_pko_get_num_pko_ports(int interface, int index);
|
|
|
|
/**
|
|
* Return the pko output queue associated with a port and a specific core.
|
|
* In normal mode (PKO lockless operation is disabled), the value returned
|
|
* is the base queue.
|
|
*
|
|
* @param port Port number
|
|
* @param core Core to get queue for
|
|
*
|
|
* @return Core-specific output queue and -1 on error.
|
|
*
|
|
* Note: This function is invalid for o68.
|
|
*/
|
|
static inline int cvmx_pko_get_base_queue_per_core(int port, int core)
|
|
{
|
|
if (OCTEON_IS_MODEL(OCTEON_CN68XX))
|
|
{
|
|
cvmx_dprintf("cvmx_pko_get_base_queue_per_core() not"
|
|
"supported starting from o68!\n");
|
|
return -1;
|
|
}
|
|
|
|
#ifndef CVMX_HELPER_PKO_MAX_PORTS_INTERFACE0
|
|
#define CVMX_HELPER_PKO_MAX_PORTS_INTERFACE0 16
|
|
#endif
|
|
#ifndef CVMX_HELPER_PKO_MAX_PORTS_INTERFACE1
|
|
#define CVMX_HELPER_PKO_MAX_PORTS_INTERFACE1 16
|
|
#endif
|
|
#ifndef CVMX_PKO_QUEUES_PER_PORT_SRIO0
|
|
/* We use two queues per port for SRIO0. Having two queues per
|
|
port with two ports gives us four queues, one for each mailbox */
|
|
#define CVMX_PKO_QUEUES_PER_PORT_SRIO0 2
|
|
#endif
|
|
#ifndef CVMX_PKO_QUEUES_PER_PORT_SRIO1
|
|
/* We use two queues per port for SRIO1. Having two queues per
|
|
port with two ports gives us four queues, one for each mailbox */
|
|
#define CVMX_PKO_QUEUES_PER_PORT_SRIO1 2
|
|
#endif
|
|
#ifndef CVMX_PKO_QUEUES_PER_PORT_SRIO2
|
|
/* We use two queues per port for SRIO2. Having two queues per
|
|
port with two ports gives us four queues, one for each mailbox */
|
|
#define CVMX_PKO_QUEUES_PER_PORT_SRIO2 2
|
|
#endif
|
|
if (port < CVMX_PKO_MAX_PORTS_INTERFACE0)
|
|
return port * CVMX_PKO_QUEUES_PER_PORT_INTERFACE0 + core;
|
|
else if (port >=16 && port < 16 + CVMX_PKO_MAX_PORTS_INTERFACE1)
|
|
return CVMX_PKO_MAX_PORTS_INTERFACE0 * CVMX_PKO_QUEUES_PER_PORT_INTERFACE0 +
|
|
(port-16) * CVMX_PKO_QUEUES_PER_PORT_INTERFACE1 + core;
|
|
else if ((port >= 32) && (port < 36))
|
|
return CVMX_PKO_MAX_PORTS_INTERFACE0 * CVMX_PKO_QUEUES_PER_PORT_INTERFACE0 +
|
|
CVMX_PKO_MAX_PORTS_INTERFACE1 * CVMX_PKO_QUEUES_PER_PORT_INTERFACE1 +
|
|
(port-32) * CVMX_PKO_QUEUES_PER_PORT_PCI;
|
|
else if ((port >= 36) && (port < 40))
|
|
return CVMX_PKO_MAX_PORTS_INTERFACE0 * CVMX_PKO_QUEUES_PER_PORT_INTERFACE0 +
|
|
CVMX_PKO_MAX_PORTS_INTERFACE1 * CVMX_PKO_QUEUES_PER_PORT_INTERFACE1 +
|
|
4 * CVMX_PKO_QUEUES_PER_PORT_PCI +
|
|
(port-36) * CVMX_PKO_QUEUES_PER_PORT_LOOP;
|
|
else if ((port >= 40) && (port < 42))
|
|
return CVMX_PKO_MAX_PORTS_INTERFACE0 * CVMX_PKO_QUEUES_PER_PORT_INTERFACE0 +
|
|
CVMX_PKO_MAX_PORTS_INTERFACE1 * CVMX_PKO_QUEUES_PER_PORT_INTERFACE1 +
|
|
4 * CVMX_PKO_QUEUES_PER_PORT_PCI +
|
|
4 * CVMX_PKO_QUEUES_PER_PORT_LOOP +
|
|
(port-40) * CVMX_PKO_QUEUES_PER_PORT_SRIO0;
|
|
else if ((port >= 42) && (port < 44))
|
|
return CVMX_PKO_MAX_PORTS_INTERFACE0 * CVMX_PKO_QUEUES_PER_PORT_INTERFACE0 +
|
|
CVMX_PKO_MAX_PORTS_INTERFACE1 * CVMX_PKO_QUEUES_PER_PORT_INTERFACE1 +
|
|
4 * CVMX_PKO_QUEUES_PER_PORT_PCI +
|
|
4 * CVMX_PKO_QUEUES_PER_PORT_LOOP +
|
|
2 * CVMX_PKO_QUEUES_PER_PORT_SRIO0 +
|
|
(port-42) * CVMX_PKO_QUEUES_PER_PORT_SRIO1;
|
|
else if ((port >= 44) && (port < 46))
|
|
return CVMX_PKO_MAX_PORTS_INTERFACE0 * CVMX_PKO_QUEUES_PER_PORT_INTERFACE0 +
|
|
CVMX_PKO_MAX_PORTS_INTERFACE1 * CVMX_PKO_QUEUES_PER_PORT_INTERFACE1 +
|
|
4 * CVMX_PKO_QUEUES_PER_PORT_PCI +
|
|
4 * CVMX_PKO_QUEUES_PER_PORT_LOOP +
|
|
4 * CVMX_PKO_QUEUES_PER_PORT_SRIO0 +
|
|
(port-44) * CVMX_PKO_QUEUES_PER_PORT_SRIO2;
|
|
else
|
|
/* Given the limit on the number of ports we can map to
|
|
* CVMX_MAX_OUTPUT_QUEUES_STATIC queues (currently 256,
|
|
* divided among all cores), the remaining unmapped ports
|
|
* are assigned an illegal queue number */
|
|
return CVMX_PKO_ILLEGAL_QUEUE;
|
|
}
|
|
|
|
/**
|
|
* For a given port number, return the base pko output queue
|
|
* for the port.
|
|
*
|
|
* @param port IPD port number
|
|
* @return Base output queue
|
|
*/
|
|
extern int cvmx_pko_get_base_queue(int port);
|
|
|
|
/**
|
|
* For a given port number, return the number of pko output queues.
|
|
*
|
|
* @param port IPD port number
|
|
* @return Number of output queues
|
|
*/
|
|
extern int cvmx_pko_get_num_queues(int port);
|
|
|
|
#ifdef CVMX_ENABLE_PKO_FUNCTIONS
|
|
|
|
/**
|
|
* Get the status counters for a port.
|
|
*
|
|
* @param ipd_port Port number (ipd_port) to get statistics for.
|
|
* @param clear Set to 1 to clear the counters after they are read
|
|
* @param status Where to put the results.
|
|
*
|
|
* Note:
|
|
* - Only the doorbell for the base queue of the ipd_port is
|
|
* collected.
|
|
* - Retrieving the stats involves writing the index through
|
|
* CVMX_PKO_REG_READ_IDX and reading the stat CSRs, in that
|
|
* order. It is not MP-safe and caller should guarantee
|
|
* atomicity.
|
|
*/
|
|
static inline void cvmx_pko_get_port_status(uint64_t ipd_port, uint64_t clear,
|
|
cvmx_pko_port_status_t *status)
|
|
{
|
|
cvmx_pko_reg_read_idx_t pko_reg_read_idx;
|
|
cvmx_pko_mem_count0_t pko_mem_count0;
|
|
cvmx_pko_mem_count1_t pko_mem_count1;
|
|
int pko_port, port_base, port_limit;
|
|
|
|
if (octeon_has_feature(OCTEON_FEATURE_PKND)) {
|
|
int interface = cvmx_helper_get_interface_num(ipd_port);
|
|
int index = cvmx_helper_get_interface_index_num(ipd_port);
|
|
port_base = cvmx_helper_get_pko_port(interface, index);
|
|
if (port_base == -1)
|
|
cvmx_dprintf("Warning: Invalid port_base\n");
|
|
port_limit = port_base + cvmx_pko_get_num_pko_ports(interface, index);
|
|
} else {
|
|
port_base = ipd_port;
|
|
port_limit = port_base + 1;
|
|
}
|
|
|
|
/*
|
|
* status->packets and status->octets
|
|
*/
|
|
status->packets = 0;
|
|
status->octets = 0;
|
|
pko_reg_read_idx.u64 = 0;
|
|
|
|
for (pko_port = port_base; pko_port < port_limit; pko_port++)
|
|
{
|
|
|
|
/*
|
|
* In theory, one doesn't need to write the index csr every
|
|
* time as he can set pko_reg_read_idx.s.inc to increment
|
|
* the index automatically. Need to find out exactly how XXX.
|
|
*/
|
|
pko_reg_read_idx.s.index = pko_port;
|
|
cvmx_write_csr(CVMX_PKO_REG_READ_IDX, pko_reg_read_idx.u64);
|
|
|
|
pko_mem_count0.u64 = cvmx_read_csr(CVMX_PKO_MEM_COUNT0);
|
|
status->packets += pko_mem_count0.s.count;
|
|
if (clear)
|
|
{
|
|
pko_mem_count0.s.count = pko_port;
|
|
cvmx_write_csr(CVMX_PKO_MEM_COUNT0, pko_mem_count0.u64);
|
|
}
|
|
|
|
pko_mem_count1.u64 = cvmx_read_csr(CVMX_PKO_MEM_COUNT1);
|
|
status->octets += pko_mem_count1.s.count;
|
|
if (clear)
|
|
{
|
|
pko_mem_count1.s.count = pko_port;
|
|
cvmx_write_csr(CVMX_PKO_MEM_COUNT1, pko_mem_count1.u64);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* status->doorbell
|
|
*/
|
|
if (OCTEON_IS_MODEL(OCTEON_CN3XXX))
|
|
{
|
|
cvmx_pko_mem_debug9_t debug9;
|
|
pko_reg_read_idx.s.index = cvmx_pko_get_base_queue(ipd_port);
|
|
cvmx_write_csr(CVMX_PKO_REG_READ_IDX, pko_reg_read_idx.u64);
|
|
debug9.u64 = cvmx_read_csr(CVMX_PKO_MEM_DEBUG9);
|
|
status->doorbell = debug9.cn38xx.doorbell;
|
|
}
|
|
else
|
|
{
|
|
cvmx_pko_mem_debug8_t debug8;
|
|
pko_reg_read_idx.s.index = cvmx_pko_get_base_queue(ipd_port);
|
|
cvmx_write_csr(CVMX_PKO_REG_READ_IDX, pko_reg_read_idx.u64);
|
|
debug8.u64 = cvmx_read_csr(CVMX_PKO_MEM_DEBUG8);
|
|
if (OCTEON_IS_MODEL(OCTEON_CN68XX))
|
|
status->doorbell = debug8.cn68xx.doorbell;
|
|
else
|
|
status->doorbell = debug8.cn58xx.doorbell;
|
|
}
|
|
}
|
|
|
|
#endif /* CVMX_ENABLE_PKO_FUNCTION */
|
|
|
|
|
|
/**
|
|
* Rate limit a PKO port to a max packets/sec. This function is only
|
|
* supported on CN57XX, CN56XX, CN55XX, and CN54XX.
|
|
*
|
|
* @param port Port to rate limit
|
|
* @param packets_s Maximum packet/sec
|
|
* @param burst Maximum number of packets to burst in a row before rate
|
|
* limiting cuts in.
|
|
*
|
|
* @return Zero on success, negative on failure
|
|
*/
|
|
extern int cvmx_pko_rate_limit_packets(int port, int packets_s, int burst);
|
|
|
|
/**
|
|
* Rate limit a PKO port to a max bits/sec. This function is only
|
|
* supported on CN57XX, CN56XX, CN55XX, and CN54XX.
|
|
*
|
|
* @param port Port to rate limit
|
|
* @param bits_s PKO rate limit in bits/sec
|
|
* @param burst Maximum number of bits to burst before rate
|
|
* limiting cuts in.
|
|
*
|
|
* @return Zero on success, negative on failure
|
|
*/
|
|
extern int cvmx_pko_rate_limit_bits(int port, uint64_t bits_s, int burst);
|
|
|
|
/**
|
|
* @INTERNAL
|
|
*
|
|
* Retrieve the PKO pipe number for a port
|
|
*
|
|
* @param interface
|
|
* @param index
|
|
*
|
|
* @return negative on error.
|
|
*
|
|
* This applies only to the non-loopback interfaces.
|
|
*
|
|
*/
|
|
extern int __cvmx_pko_get_pipe(int interface, int index);
|
|
|
|
/**
|
|
* For a given PKO port number, return the base output queue
|
|
* for the port.
|
|
*
|
|
* @param pko_port PKO port number
|
|
* @return Base output queue
|
|
*/
|
|
extern int cvmx_pko_get_base_queue_pkoid(int pko_port);
|
|
|
|
/**
|
|
* For a given PKO port number, return the number of output queues
|
|
* for the port.
|
|
*
|
|
* @param pko_port PKO port number
|
|
* @return the number of output queues
|
|
*/
|
|
extern int cvmx_pko_get_num_queues_pkoid(int pko_port);
|
|
|
|
/**
|
|
* Ring the packet output doorbell. This tells the packet
|
|
* output hardware that "len" command words have been added
|
|
* to its pending list. This command includes the required
|
|
* CVMX_SYNCWS before the doorbell ring.
|
|
*
|
|
* @param pko_port Port the packet is for
|
|
* @param queue Queue the packet is for
|
|
* @param len Length of the command in 64 bit words
|
|
*/
|
|
static inline void cvmx_pko_doorbell_pkoid(uint64_t pko_port, uint64_t queue, uint64_t len)
|
|
{
|
|
cvmx_pko_doorbell_address_t ptr;
|
|
|
|
ptr.u64 = 0;
|
|
ptr.s.mem_space = CVMX_IO_SEG;
|
|
ptr.s.did = CVMX_OCT_DID_PKT_SEND;
|
|
ptr.s.is_io = 1;
|
|
ptr.s.port = pko_port;
|
|
ptr.s.queue = queue;
|
|
CVMX_SYNCWS; /* Need to make sure output queue data is in DRAM before doorbell write */
|
|
cvmx_write_io(ptr.u64, len);
|
|
}
|
|
|
|
/**
|
|
* Complete packet output. cvmx_pko_send_packet_prepare() must be called exactly once before this,
|
|
* and the same parameters must be passed to both cvmx_pko_send_packet_prepare() and
|
|
* cvmx_pko_send_packet_finish_pkoid().
|
|
*
|
|
* @param pko_port Port to send it on
|
|
* @param queue Queue to use
|
|
* @param pko_command
|
|
* PKO HW command word
|
|
* @param packet Packet to send
|
|
* @param use_locking
|
|
* CVMX_PKO_LOCK_NONE, CVMX_PKO_LOCK_ATOMIC_TAG, or CVMX_PKO_LOCK_CMD_QUEUE
|
|
*
|
|
* @return returns CVMX_PKO_SUCCESS on success, or error code on failure of output
|
|
*/
|
|
static inline cvmx_pko_status_t cvmx_pko_send_packet_finish_pkoid(int pko_port, uint64_t queue,
|
|
cvmx_pko_command_word0_t pko_command,
|
|
cvmx_buf_ptr_t packet, cvmx_pko_lock_t use_locking)
|
|
{
|
|
cvmx_cmd_queue_result_t result;
|
|
if (use_locking == CVMX_PKO_LOCK_ATOMIC_TAG)
|
|
cvmx_pow_tag_sw_wait();
|
|
result = cvmx_cmd_queue_write2(CVMX_CMD_QUEUE_PKO(queue),
|
|
(use_locking == CVMX_PKO_LOCK_CMD_QUEUE),
|
|
pko_command.u64,
|
|
packet.u64);
|
|
if (cvmx_likely(result == CVMX_CMD_QUEUE_SUCCESS))
|
|
{
|
|
cvmx_pko_doorbell_pkoid(pko_port, queue, 2);
|
|
return CVMX_PKO_SUCCESS;
|
|
}
|
|
else if ((result == CVMX_CMD_QUEUE_NO_MEMORY) || (result == CVMX_CMD_QUEUE_FULL))
|
|
{
|
|
return CVMX_PKO_NO_MEMORY;
|
|
}
|
|
else
|
|
{
|
|
return CVMX_PKO_INVALID_QUEUE;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* Complete packet output. cvmx_pko_send_packet_prepare() must be called exactly once before this,
|
|
* and the same parameters must be passed to both cvmx_pko_send_packet_prepare() and
|
|
* cvmx_pko_send_packet_finish_pkoid().
|
|
*
|
|
* @param pko_port The PKO port the packet is for
|
|
* @param queue Queue to use
|
|
* @param pko_command
|
|
* PKO HW command word
|
|
* @param packet Packet to send
|
|
* @param addr Plysical address of a work queue entry or physical address to zero on complete.
|
|
* @param use_locking
|
|
* CVMX_PKO_LOCK_NONE, CVMX_PKO_LOCK_ATOMIC_TAG, or CVMX_PKO_LOCK_CMD_QUEUE
|
|
*
|
|
* @return returns CVMX_PKO_SUCCESS on success, or error code on failure of output
|
|
*/
|
|
static inline cvmx_pko_status_t cvmx_pko_send_packet_finish3_pkoid(uint64_t pko_port, uint64_t queue,
|
|
cvmx_pko_command_word0_t pko_command,
|
|
cvmx_buf_ptr_t packet, uint64_t addr, cvmx_pko_lock_t use_locking)
|
|
{
|
|
cvmx_cmd_queue_result_t result;
|
|
if (use_locking == CVMX_PKO_LOCK_ATOMIC_TAG)
|
|
cvmx_pow_tag_sw_wait();
|
|
result = cvmx_cmd_queue_write3(CVMX_CMD_QUEUE_PKO(queue),
|
|
(use_locking == CVMX_PKO_LOCK_CMD_QUEUE),
|
|
pko_command.u64,
|
|
packet.u64,
|
|
addr);
|
|
if (cvmx_likely(result == CVMX_CMD_QUEUE_SUCCESS))
|
|
{
|
|
cvmx_pko_doorbell_pkoid(pko_port, queue, 3);
|
|
return CVMX_PKO_SUCCESS;
|
|
}
|
|
else if ((result == CVMX_CMD_QUEUE_NO_MEMORY) || (result == CVMX_CMD_QUEUE_FULL))
|
|
{
|
|
return CVMX_PKO_NO_MEMORY;
|
|
}
|
|
else
|
|
{
|
|
return CVMX_PKO_INVALID_QUEUE;
|
|
}
|
|
}
|
|
|
|
#endif /* CVMX_ENABLE_PKO_FUNCTIONS */
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif /* __CVMX_PKO_H__ */
|