1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-26 11:47:31 +00:00
freebsd/sys/dev/ath/ah_osdep.c
Sam Leffler 3fe92528af o move ath hal os glue code from the hal to the driver: this code was
part of the hal distribution early on when the hal was built for
  each os but it's been portable for a long time so move the os-specific
  code out (and off the vendor branch)
o correct the copyright on ah_osdep.?; it was mistakenly given a
  restricted license and not a dual-bsd/gpl license
o remove the module api definition as it was never used
o fixup include paths for move of ah_osdep.h

MFC after:	2 weeks
2006-09-18 16:49:15 +00:00

445 lines
12 KiB
C

/*-
* Copyright (c) 2002-2006 Sam Leffler, Errno Consulting
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any
* redistribution must be conditioned upon including a substantially
* similar Disclaimer requirement for further binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY
* AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
* THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY,
* OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
* IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
* THE POSSIBILITY OF SUCH DAMAGES.
*
* $FreeBSD$
*/
#include "opt_ah.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/module.h>
#include <sys/sysctl.h>
#include <sys/bus.h>
#include <sys/malloc.h>
#include <sys/proc.h>
#include <machine/stdarg.h>
#include <net/ethernet.h> /* XXX for ether_sprintf */
#include <contrib/dev/ath/ah.h>
/*
* WiSoC boards overload the bus tag with information about the
* board layout. We must extract the bus space tag from that
* indirect structure. For everyone else the tag is passed in
* directly.
* XXX cache indirect ref privately
*/
#ifdef AH_SUPPORT_AR5312
#define BUSTAG(ah) \
((bus_space_tag_t) ((struct ar531x_config *)((ah)->ah_st))->tag)
#else
#define BUSTAG(ah) ((bus_space_tag_t) (ah)->ah_st)
#endif
extern void ath_hal_printf(struct ath_hal *, const char*, ...)
__printflike(2,3);
extern void ath_hal_vprintf(struct ath_hal *, const char*, __va_list)
__printflike(2, 0);
extern const char* ath_hal_ether_sprintf(const u_int8_t *mac);
extern void *ath_hal_malloc(size_t);
extern void ath_hal_free(void *);
#ifdef AH_ASSERT
extern void ath_hal_assert_failed(const char* filename,
int lineno, const char* msg);
#endif
#ifdef AH_DEBUG
extern void HALDEBUG(struct ath_hal *ah, const char* fmt, ...);
extern void HALDEBUGn(struct ath_hal *ah, u_int level, const char* fmt, ...);
#endif /* AH_DEBUG */
/* NB: put this here instead of the driver to avoid circular references */
SYSCTL_NODE(_hw, OID_AUTO, ath, CTLFLAG_RD, 0, "Atheros driver parameters");
SYSCTL_NODE(_hw_ath, OID_AUTO, hal, CTLFLAG_RD, 0, "Atheros HAL parameters");
#ifdef AH_DEBUG
static int ath_hal_debug = 0;
SYSCTL_INT(_hw_ath_hal, OID_AUTO, debug, CTLFLAG_RW, &ath_hal_debug,
0, "Atheros HAL debugging printfs");
TUNABLE_INT("hw.ath.hal.debug", &ath_hal_debug);
#endif /* AH_DEBUG */
SYSCTL_STRING(_hw_ath_hal, OID_AUTO, version, CTLFLAG_RD, ath_hal_version, 0,
"Atheros HAL version");
/* NB: these are deprecated; they exist for now for compatibility */
int ath_hal_dma_beacon_response_time = 2; /* in TU's */
SYSCTL_INT(_hw_ath_hal, OID_AUTO, dma_brt, CTLFLAG_RW,
&ath_hal_dma_beacon_response_time, 0,
"Atheros HAL DMA beacon response time");
int ath_hal_sw_beacon_response_time = 10; /* in TU's */
SYSCTL_INT(_hw_ath_hal, OID_AUTO, sw_brt, CTLFLAG_RW,
&ath_hal_sw_beacon_response_time, 0,
"Atheros HAL software beacon response time");
int ath_hal_additional_swba_backoff = 0; /* in TU's */
SYSCTL_INT(_hw_ath_hal, OID_AUTO, swba_backoff, CTLFLAG_RW,
&ath_hal_additional_swba_backoff, 0,
"Atheros HAL additional SWBA backoff time");
MALLOC_DEFINE(M_ATH_HAL, "ath_hal", "ath hal data");
void*
ath_hal_malloc(size_t size)
{
return malloc(size, M_ATH_HAL, M_NOWAIT | M_ZERO);
}
void
ath_hal_free(void* p)
{
return free(p, M_ATH_HAL);
}
void
ath_hal_vprintf(struct ath_hal *ah, const char* fmt, va_list ap)
{
vprintf(fmt, ap);
}
void
ath_hal_printf(struct ath_hal *ah, const char* fmt, ...)
{
va_list ap;
va_start(ap, fmt);
ath_hal_vprintf(ah, fmt, ap);
va_end(ap);
}
const char*
ath_hal_ether_sprintf(const u_int8_t *mac)
{
return ether_sprintf(mac);
}
#ifdef AH_DEBUG
void
HALDEBUG(struct ath_hal *ah, const char* fmt, ...)
{
if (ath_hal_debug) {
__va_list ap;
va_start(ap, fmt);
ath_hal_vprintf(ah, fmt, ap);
va_end(ap);
}
}
void
HALDEBUGn(struct ath_hal *ah, u_int level, const char* fmt, ...)
{
if (ath_hal_debug >= level) {
__va_list ap;
va_start(ap, fmt);
ath_hal_vprintf(ah, fmt, ap);
va_end(ap);
}
}
#endif /* AH_DEBUG */
#ifdef AH_DEBUG_ALQ
/*
* ALQ register tracing support.
*
* Setting hw.ath.hal.alq=1 enables tracing of all register reads and
* writes to the file /tmp/ath_hal.log. The file format is a simple
* fixed-size array of records. When done logging set hw.ath.hal.alq=0
* and then decode the file with the arcode program (that is part of the
* HAL). If you start+stop tracing the data will be appended to an
* existing file.
*
* NB: doesn't handle multiple devices properly; only one DEVICE record
* is emitted and the different devices are not identified.
*/
#include <sys/alq.h>
#include <sys/pcpu.h>
#include <contrib/dev/ath/ah_decode.h>
static struct alq *ath_hal_alq;
static int ath_hal_alq_emitdev; /* need to emit DEVICE record */
static u_int ath_hal_alq_lost; /* count of lost records */
static const char *ath_hal_logfile = "/tmp/ath_hal.log";
static u_int ath_hal_alq_qsize = 64*1024;
static int
ath_hal_setlogging(int enable)
{
int error;
if (enable) {
error = suser(curthread);
if (error == 0) {
error = alq_open(&ath_hal_alq, ath_hal_logfile,
curthread->td_ucred, ALQ_DEFAULT_CMODE,
sizeof (struct athregrec), ath_hal_alq_qsize);
ath_hal_alq_lost = 0;
ath_hal_alq_emitdev = 1;
printf("ath_hal: logging to %s enabled\n",
ath_hal_logfile);
}
} else {
if (ath_hal_alq)
alq_close(ath_hal_alq);
ath_hal_alq = NULL;
printf("ath_hal: logging disabled\n");
error = 0;
}
return (error);
}
static int
sysctl_hw_ath_hal_log(SYSCTL_HANDLER_ARGS)
{
int error, enable;
enable = (ath_hal_alq != NULL);
error = sysctl_handle_int(oidp, &enable, 0, req);
if (error || !req->newptr)
return (error);
else
return (ath_hal_setlogging(enable));
}
SYSCTL_PROC(_hw_ath_hal, OID_AUTO, alq, CTLTYPE_INT|CTLFLAG_RW,
0, 0, sysctl_hw_ath_hal_log, "I", "Enable HAL register logging");
SYSCTL_INT(_hw_ath_hal, OID_AUTO, alq_size, CTLFLAG_RW,
&ath_hal_alq_qsize, 0, "In-memory log size (#records)");
SYSCTL_INT(_hw_ath_hal, OID_AUTO, alq_lost, CTLFLAG_RW,
&ath_hal_alq_lost, 0, "Register operations not logged");
static struct ale *
ath_hal_alq_get(struct ath_hal *ah)
{
struct ale *ale;
if (ath_hal_alq_emitdev) {
ale = alq_get(ath_hal_alq, ALQ_NOWAIT);
if (ale) {
struct athregrec *r =
(struct athregrec *) ale->ae_data;
r->op = OP_DEVICE;
r->reg = 0;
r->val = ah->ah_devid;
alq_post(ath_hal_alq, ale);
ath_hal_alq_emitdev = 0;
} else
ath_hal_alq_lost++;
}
ale = alq_get(ath_hal_alq, ALQ_NOWAIT);
if (!ale)
ath_hal_alq_lost++;
return ale;
}
void
ath_hal_reg_write(struct ath_hal *ah, u_int32_t reg, u_int32_t val)
{
bus_space_tag_t tag = BUSTAG(ah);
bus_space_handle_t h = (bus_space_handle_t) ah->ah_sh;
if (ath_hal_alq) {
struct ale *ale = ath_hal_alq_get(ah);
if (ale) {
struct athregrec *r = (struct athregrec *) ale->ae_data;
r->op = OP_WRITE;
r->reg = reg;
r->val = val;
alq_post(ath_hal_alq, ale);
}
}
#if _BYTE_ORDER == _BIG_ENDIAN
if (reg >= 0x4000 && reg < 0x5000)
bus_space_write_4(tag, h, reg, val);
else
#endif
bus_space_write_stream_4(tag, h, reg, val);
}
u_int32_t
ath_hal_reg_read(struct ath_hal *ah, u_int32_t reg)
{
bus_space_tag_t tag = BUSTAG(ah);
bus_space_handle_t h = (bus_space_handle_t) ah->ah_sh;
u_int32_t val;
#if _BYTE_ORDER == _BIG_ENDIAN
if (reg >= 0x4000 && reg < 0x5000)
val = bus_space_read_4(tag, h, reg);
else
#endif
val = bus_space_read_stream_4(tag, h, reg);
if (ath_hal_alq) {
struct ale *ale = ath_hal_alq_get(ah);
if (ale) {
struct athregrec *r = (struct athregrec *) ale->ae_data;
r->op = OP_READ;
r->reg = reg;
r->val = val;
alq_post(ath_hal_alq, ale);
}
}
return val;
}
void
OS_MARK(struct ath_hal *ah, u_int id, u_int32_t v)
{
if (ath_hal_alq) {
struct ale *ale = ath_hal_alq_get(ah);
if (ale) {
struct athregrec *r = (struct athregrec *) ale->ae_data;
r->op = OP_MARK;
r->reg = id;
r->val = v;
alq_post(ath_hal_alq, ale);
}
}
}
#elif defined(AH_DEBUG) || defined(AH_REGOPS_FUNC)
/*
* Memory-mapped device register read/write. These are here
* as routines when debugging support is enabled and/or when
* explicitly configured to use function calls. The latter is
* for architectures that might need to do something before
* referencing memory (e.g. remap an i/o window).
*
* NB: see the comments in ah_osdep.h about byte-swapping register
* reads and writes to understand what's going on below.
*/
void
ath_hal_reg_write(struct ath_hal *ah, u_int32_t reg, u_int32_t val)
{
bus_space_tag_t tag = BUSTAG(ah);
bus_space_handle_t h = (bus_space_handle_t) ah->ah_sh;
#if _BYTE_ORDER == _BIG_ENDIAN
if (reg >= 0x4000 && reg < 0x5000)
bus_space_write_4(tag, h, reg, val);
else
#endif
bus_space_write_stream_4(tag, h, reg, val);
}
u_int32_t
ath_hal_reg_read(struct ath_hal *ah, u_int32_t reg)
{
bus_space_tag_t tag = BUSTAG(ah);
bus_space_handle_t h = (bus_space_handle_t) ah->ah_sh;
u_int32_t val;
#if _BYTE_ORDER == _BIG_ENDIAN
if (reg >= 0x4000 && reg < 0x5000)
val = bus_space_read_4(tag, h, reg);
else
#endif
val = bus_space_read_stream_4(tag, h, reg);
return val;
}
#endif /* AH_DEBUG || AH_REGOPS_FUNC */
#ifdef AH_ASSERT
void
ath_hal_assert_failed(const char* filename, int lineno, const char *msg)
{
printf("Atheros HAL assertion failure: %s: line %u: %s\n",
filename, lineno, msg);
panic("ath_hal_assert");
}
#endif /* AH_ASSERT */
/*
* Delay n microseconds.
*/
void
ath_hal_delay(int n)
{
DELAY(n);
}
u_int32_t
ath_hal_getuptime(struct ath_hal *ah)
{
struct bintime bt;
getbinuptime(&bt);
return (bt.sec * 1000) +
(((uint64_t)1000 * (uint32_t)(bt.frac >> 32)) >> 32);
}
void
ath_hal_memzero(void *dst, size_t n)
{
bzero(dst, n);
}
void *
ath_hal_memcpy(void *dst, const void *src, size_t n)
{
return memcpy(dst, src, n);
}
/*
* Module glue.
*/
static int
ath_hal_modevent(module_t mod, int type, void *unused)
{
const char *sep;
int i;
switch (type) {
case MOD_LOAD:
printf("ath_hal: %s (", ath_hal_version);
sep = "";
for (i = 0; ath_hal_buildopts[i] != NULL; i++) {
printf("%s%s", sep, ath_hal_buildopts[i]);
sep = ", ";
}
printf(")\n");
return 0;
case MOD_UNLOAD:
return 0;
}
return EINVAL;
}
static moduledata_t ath_hal_mod = {
"ath_hal",
ath_hal_modevent,
0
};
DECLARE_MODULE(ath_hal, ath_hal_mod, SI_SUB_DRIVERS, SI_ORDER_ANY);
MODULE_VERSION(ath_hal, 1);