mirror of
https://git.FreeBSD.org/src.git
synced 2024-12-20 11:11:24 +00:00
c92e45e4a1
Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
107 lines
3.3 KiB
C
107 lines
3.3 KiB
C
/*
|
|
* Copyright (c) 2000,2001 Jonathan Chen.
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions, and the following disclaimer,
|
|
* without modification, immediately at the beginning of the file.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in
|
|
* the documentation and/or other materials provided with the
|
|
* distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
|
|
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
/*
|
|
* Structure definitions for the Cardbus Bridge driver
|
|
*/
|
|
|
|
struct intrhand {
|
|
void(*func)(void*arg);
|
|
void *arg;
|
|
STAILQ_ENTRY(intrhand) entries;
|
|
};
|
|
|
|
struct pccbb_reslist {
|
|
SLIST_ENTRY(pccbb_reslist) link;
|
|
struct resource *res;
|
|
int type;
|
|
int rid;
|
|
/* note: unlike the regular resource list, there can be
|
|
* duplicate rid's in the same list. However, the
|
|
* combination of rid and res->r_dev should be unique.
|
|
*/
|
|
bus_addr_t cardaddr; /* for 16-bit pccard memory */
|
|
};
|
|
|
|
#define PCCBB_AUTO_OPEN_SMALLHOLE 0x100
|
|
|
|
struct pccbb_softc {
|
|
device_t dev;
|
|
struct exca_softc exca;
|
|
struct resource *base_res;
|
|
struct resource *irq_res;
|
|
void *intrhand;
|
|
bus_space_tag_t bst;
|
|
bus_space_handle_t bsh;
|
|
u_int8_t secbus;
|
|
u_int8_t subbus;
|
|
struct mtx mtx;
|
|
u_int32_t flags;
|
|
#define PCCBB_16BIT_CARD 0x02000000
|
|
#define PCCBB_KTHREAD_RUNNING 0x04000000
|
|
#define PCCBB_KTHREAD_DONE 0x08000000
|
|
int chipset; /* chipset id */
|
|
#define CB_UNKNOWN 0 /* NOT Cardbus-PCI bridge */
|
|
#define CB_TI113X 1 /* TI PCI1130/1131 */
|
|
#define CB_TI12XX 2 /* TI PCI1250/1220 */
|
|
#define CB_RF5C47X 3 /* RICOH RF5C475/476/477 */
|
|
#define CB_RF5C46X 4 /* RICOH RF5C465/466/467 */
|
|
#define CB_CIRRUS 5 /* Cirrus Logic CLPD683x */
|
|
#define CB_TOPIC95 6 /* Toshiba ToPIC95 */
|
|
#define CB_TOPIC97 7 /* Toshiba ToPIC97/100 */
|
|
SLIST_HEAD(, pccbb_reslist) rl;
|
|
|
|
device_t cbdev;
|
|
device_t pccarddev;
|
|
|
|
struct proc *event_thread;
|
|
};
|
|
|
|
/* result of detect_card */
|
|
#define CARD_UKN_CARD 0x00
|
|
#define CARD_5V_CARD 0x01
|
|
#define CARD_3V_CARD 0x02
|
|
#define CARD_XV_CARD 0x04
|
|
#define CARD_YV_CARD 0x08
|
|
|
|
/* for power_socket */
|
|
#define CARD_VCC_UC 0x0000
|
|
#define CARD_VCC_3V 0x0001
|
|
#define CARD_VCC_XV 0x0002
|
|
#define CARD_VCC_YV 0x0003
|
|
#define CARD_VCC_0V 0x0004
|
|
#define CARD_VCC_5V 0x0005
|
|
#define CARD_VCCMASK 0x000f
|
|
#define CARD_VPP_UC 0x0000
|
|
#define CARD_VPP_VCC 0x0010
|
|
#define CARD_VPP_12V 0x0030
|
|
#define CARD_VPP_0V 0x0040
|
|
#define CARD_VPPMASK 0x00f0
|