mirror of
https://git.FreeBSD.org/src.git
synced 2024-12-23 11:18:54 +00:00
85de9f54f8
the ncr53c9x.c core where it actually belongs so future front-ends don't need to add it. o Use the correct OFW property when looking for the initiator ID of the SBus device. o Don't specify an alignment when creating the parent DMA tag for SUNW,fas; their DMA engine doesn't require an alignment constraint and it's no inherited by the child DMA tags anyway (which probably is a bug though). o Drop the superfluous sc_maxsync and use sc_minsync instead. The former apparently was added due to a confusion with the maximum frequency used in cam(4), which basically corresponds to the inverse of minimum sync period. o Merge ncr53c9x.c from NetBSD: 1.116: NCRDMA_SETUP() should be called before NCR_SET_COUNT() and NCRCMD_DMA command in ncr53c9x_select(). 1.125: free allocated resources on detach. o Static'ize ncr53c9x_action(), ncr53c9x_init() and ncr53c9x_reset() as these are not required outside of ncr53c9x.c. o In ncr53c9x_attach() don't leak the device mutex in case attaching fails. o Register an asynchronous notification handler so in case cam(4) reports a lost device we can cancel outstanding commands and restore the default parameters for the target in question. o For FAS366 correctly support 16-bit target IDs and let it know that we use 32-bit transfers. o Overhaul the negotiation of transfer settings. This includes distinguishing between current and goal transfer settings of the target so we can renegotiate their goal settings when necessary and correcting the order in which tagged, wide and synchronous transfers are negotiated. o If we are requesting sense, force a renegotiation if we are currently using anything different from asynchronous at 8 bit as the target might have lost our transfer negotiations. o In case of an XPT_RESET_BUS just directly call ncr53c9x_init() instead of issuing a NCRCMD_RSTSCSI, which in turn will issue an interrupt that is treated as an unexpected SCSI bus reset by ncr53c9x_intr() and thus calls ncr53c9x_init(). Remove the now no longer used ncr53c9x_scsi_reset(). o Correct an off-by-one error when setting cpi->max_lun. o In replace printf(9) with device_printf(9) calls where appropriate and in ncr53c9x_action() remove some unnecessarily verbose messages. o In ncr53c9x_sched() use TAILQ_FOREACH() instead of reimplementing it and consolidate two tagging-related target info checks into one. o In ncr53c9x_done() set the CAM status to CAM_SCSI_STATUS_ERROR when appropriate, respect CAM_DIS_AUTOSENSE and teach it to return SCSI status information. o In ncr53c9x_dequeue() ensure the tags are cleared. o Use ulmin() instead of min() where appropriate. o In ncr53c9x_msgout() consistently use the reset label. o When we're interrupted during a data phase and the DMA engine is still active, don't panic but reset the core and the DMA engine as this should be sufficient. Also, the typical problem for triggering this was the lack of renegotiation when requesting sense. o Correctly handle DEVICE RESETs. o Adapt the locking of esp(4) to MPSAFE cam(4). This includes moving the calls of lsi64854_attach() to the bus front-ends so it can pass the esp(4) mutex to bus_dma_tag_create(9). o Change the LSI64854 driver to not create a DMA tag and map for the Ethernet channel as le(4) will handle these on its own as well as sync and unload the DMA maps for the SCSI and parallel port channel after a DMA transfer. o Cam(4)'ify some NetBSD-centric comments. o Use bus_{read,write}_*(9) instead of bus_space_{read,write}_*(9) and take advantage of rman_get_rid(9) in order to save some softc members. Reviewed by: scottl MFC after: 1 month
3201 lines
84 KiB
C
3201 lines
84 KiB
C
/*-
|
|
* Copyright (c) 2004 Scott Long
|
|
* Copyright (c) 2005, 2008 Marius Strobl <marius@FreeBSD.org>
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
*/
|
|
|
|
/* $NetBSD: ncr53c9x.c,v 1.125 2007/01/09 12:53:12 itohy Exp $ */
|
|
|
|
/*-
|
|
* Copyright (c) 1998, 2002 The NetBSD Foundation, Inc.
|
|
* All rights reserved.
|
|
*
|
|
* This code is derived from software contributed to The NetBSD Foundation
|
|
* by Charles M. Hannum.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by the NetBSD
|
|
* Foundation, Inc. and its contributors.
|
|
* 4. Neither the name of The NetBSD Foundation nor the names of its
|
|
* contributors may be used to endorse or promote products derived
|
|
* from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
|
|
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
|
|
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
|
|
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
|
|
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
/*-
|
|
* Copyright (c) 1994 Peter Galbavy
|
|
* Copyright (c) 1995 Paul Kranenburg
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by Peter Galbavy
|
|
* 4. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
|
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
|
|
* INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
|
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
|
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
/*
|
|
* Based on aic6360 by Jarle Greipsland
|
|
*
|
|
* Acknowledgements: Many of the algorithms used in this driver are
|
|
* inspired by the work of Julian Elischer (julian@FreeBSD.org) and
|
|
* Charles Hannum (mycroft@duality.gnu.ai.mit.edu). Thanks a million!
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/lock.h>
|
|
#include <sys/module.h>
|
|
#include <sys/mutex.h>
|
|
#include <sys/queue.h>
|
|
#include <sys/time.h>
|
|
#include <sys/callout.h>
|
|
|
|
#include <cam/cam.h>
|
|
#include <cam/cam_ccb.h>
|
|
#include <cam/cam_debug.h>
|
|
#include <cam/cam_sim.h>
|
|
#include <cam/cam_xpt_sim.h>
|
|
#include <cam/scsi/scsi_all.h>
|
|
#include <cam/scsi/scsi_message.h>
|
|
|
|
#include <dev/esp/ncr53c9xreg.h>
|
|
#include <dev/esp/ncr53c9xvar.h>
|
|
|
|
MODULE_DEPEND(esp, cam, 1, 1, 1);
|
|
|
|
#ifdef NCR53C9X_DEBUG
|
|
static int ncr53c9x_debug =
|
|
NCR_SHOWMISC /* | NCR_SHOWPHASE | NCR_SHOWTRAC | NCR_SHOWCMDS */;
|
|
#endif
|
|
|
|
static void ncr53c9x_abort(struct ncr53c9x_softc *sc,
|
|
struct ncr53c9x_ecb *ecb);
|
|
static void ncr53c9x_action(struct cam_sim *sim, union ccb *ccb);
|
|
static void ncr53c9x_async(void *cbarg, uint32_t code,
|
|
struct cam_path *path, void *arg);
|
|
static void ncr53c9x_callout(void *arg);
|
|
static void ncr53c9x_clear(struct ncr53c9x_softc *sc, cam_status result);
|
|
static void ncr53c9x_clear_target(struct ncr53c9x_softc *sc, int target,
|
|
cam_status result);
|
|
static void ncr53c9x_dequeue(struct ncr53c9x_softc *sc,
|
|
struct ncr53c9x_ecb *ecb);
|
|
static void ncr53c9x_done(struct ncr53c9x_softc *sc,
|
|
struct ncr53c9x_ecb *ecb);
|
|
static void ncr53c9x_free_ecb(struct ncr53c9x_softc *sc,
|
|
struct ncr53c9x_ecb *ecb);
|
|
static void ncr53c9x_msgin(struct ncr53c9x_softc *sc);
|
|
static void ncr53c9x_msgout(struct ncr53c9x_softc *sc);
|
|
static void ncr53c9x_init(struct ncr53c9x_softc *sc, int doreset);
|
|
static void ncr53c9x_intr1(struct ncr53c9x_softc *sc);
|
|
static void ncr53c9x_poll(struct cam_sim *sim);
|
|
static int ncr53c9x_rdfifo(struct ncr53c9x_softc *sc, int how);
|
|
static int ncr53c9x_reselect(struct ncr53c9x_softc *sc, int message,
|
|
int tagtype, int tagid);
|
|
static void ncr53c9x_reset(struct ncr53c9x_softc *sc);
|
|
static void ncr53c9x_sense(struct ncr53c9x_softc *sc,
|
|
struct ncr53c9x_ecb *ecb);
|
|
static void ncr53c9x_sched(struct ncr53c9x_softc *sc);
|
|
static void ncr53c9x_select(struct ncr53c9x_softc *sc,
|
|
struct ncr53c9x_ecb *ecb);
|
|
static void ncr53c9x_watch(void *arg);
|
|
static void ncr53c9x_wrfifo(struct ncr53c9x_softc *sc, u_char *p,
|
|
int len);
|
|
|
|
static struct ncr53c9x_ecb *ncr53c9x_get_ecb(struct ncr53c9x_softc *sc);
|
|
static struct ncr53c9x_linfo *ncr53c9x_lunsearch(struct ncr53c9x_tinfo *sc,
|
|
int64_t lun);
|
|
|
|
static inline void ncr53c9x_readregs(struct ncr53c9x_softc *sc);
|
|
static inline void ncr53c9x_setsync(struct ncr53c9x_softc *sc,
|
|
struct ncr53c9x_tinfo *ti);
|
|
static inline int ncr53c9x_stp2cpb(struct ncr53c9x_softc *sc,
|
|
int period);
|
|
|
|
#define NCR_RDFIFO_START 0
|
|
#define NCR_RDFIFO_CONTINUE 1
|
|
|
|
#define NCR_SET_COUNT(sc, size) do { \
|
|
NCR_WRITE_REG((sc), NCR_TCL, (size)); \
|
|
NCR_WRITE_REG((sc), NCR_TCM, (size) >> 8); \
|
|
if ((sc->sc_cfg2 & NCRCFG2_FE) || \
|
|
(sc->sc_rev == NCR_VARIANT_FAS366)) { \
|
|
NCR_WRITE_REG((sc), NCR_TCH, (size) >> 16); \
|
|
} \
|
|
if (sc->sc_rev == NCR_VARIANT_FAS366) { \
|
|
NCR_WRITE_REG(sc, NCR_RCH, 0); \
|
|
} \
|
|
} while (0)
|
|
|
|
#ifndef mstohz
|
|
#define mstohz(ms) \
|
|
(((ms) < 0x20000) ? \
|
|
((ms +0u) / 1000u) * hz : \
|
|
((ms +0u) * hz) /1000u)
|
|
#endif
|
|
|
|
/*
|
|
* Names for the NCR53c9x variants, corresponding to the variant tags
|
|
* in ncr53c9xvar.h.
|
|
*/
|
|
static const char *ncr53c9x_variant_names[] = {
|
|
"ESP100",
|
|
"ESP100A",
|
|
"ESP200",
|
|
"NCR53C94",
|
|
"NCR53C96",
|
|
"ESP406",
|
|
"FAS408",
|
|
"FAS216",
|
|
"AM53C974",
|
|
"FAS366/HME",
|
|
"NCR53C90 (86C01)",
|
|
"FAS100A",
|
|
"FAS236",
|
|
};
|
|
|
|
/*
|
|
* Search linked list for LUN info by LUN id.
|
|
*/
|
|
static struct ncr53c9x_linfo *
|
|
ncr53c9x_lunsearch(struct ncr53c9x_tinfo *ti, int64_t lun)
|
|
{
|
|
struct ncr53c9x_linfo *li;
|
|
|
|
LIST_FOREACH(li, &ti->luns, link)
|
|
if (li->lun == lun)
|
|
return (li);
|
|
return (NULL);
|
|
}
|
|
|
|
/*
|
|
* Attach this instance, and then all the sub-devices.
|
|
*/
|
|
int
|
|
ncr53c9x_attach(struct ncr53c9x_softc *sc)
|
|
{
|
|
struct cam_devq *devq;
|
|
struct cam_sim *sim;
|
|
struct cam_path *path;
|
|
struct ncr53c9x_ecb *ecb;
|
|
int error, i;
|
|
|
|
if (NCR_LOCK_INITIALIZED(sc) == 0) {
|
|
device_printf(sc->sc_dev, "mutex not initialized\n");
|
|
return (ENXIO);
|
|
}
|
|
|
|
callout_init_mtx(&sc->sc_watchdog, &sc->sc_lock, 0);
|
|
|
|
/*
|
|
* Note, the front-end has set us up to print the chip variation.
|
|
*/
|
|
if (sc->sc_rev >= NCR_VARIANT_MAX) {
|
|
device_printf(sc->sc_dev, "unknown variant %d, devices not "
|
|
"attached\n", sc->sc_rev);
|
|
return (EINVAL);
|
|
}
|
|
|
|
device_printf(sc->sc_dev, "%s, %dMHz, SCSI ID %d\n",
|
|
ncr53c9x_variant_names[sc->sc_rev], sc->sc_freq, sc->sc_id);
|
|
|
|
sc->sc_ntarg = (sc->sc_rev == NCR_VARIANT_FAS366) ? 16 : 8;
|
|
|
|
/*
|
|
* Allocate SCSI message buffers.
|
|
* Front-ends can override allocation to avoid alignment
|
|
* handling in the DMA engines. Note that ncr53c9x_msgout()
|
|
* can request a 1 byte DMA transfer.
|
|
*/
|
|
if (sc->sc_omess == NULL) {
|
|
sc->sc_omess_self = 1;
|
|
sc->sc_omess = malloc(NCR_MAX_MSG_LEN, M_DEVBUF, M_NOWAIT);
|
|
if (sc->sc_omess == NULL) {
|
|
device_printf(sc->sc_dev,
|
|
"cannot allocate MSGOUT buffer\n");
|
|
return (ENOMEM);
|
|
}
|
|
} else
|
|
sc->sc_omess_self = 0;
|
|
|
|
if (sc->sc_imess == NULL) {
|
|
sc->sc_imess_self = 1;
|
|
sc->sc_imess = malloc(NCR_MAX_MSG_LEN + 1, M_DEVBUF, M_NOWAIT);
|
|
if (sc->sc_imess == NULL) {
|
|
device_printf(sc->sc_dev,
|
|
"cannot allocate MSGIN buffer\n");
|
|
error = ENOMEM;
|
|
goto fail_omess;
|
|
}
|
|
} else
|
|
sc->sc_imess_self = 0;
|
|
|
|
sc->sc_tinfo = malloc(sc->sc_ntarg * sizeof(sc->sc_tinfo[0]),
|
|
M_DEVBUF, M_NOWAIT | M_ZERO);
|
|
if (sc->sc_tinfo == NULL) {
|
|
device_printf(sc->sc_dev,
|
|
"cannot allocate target info buffer\n");
|
|
error = ENOMEM;
|
|
goto fail_imess;
|
|
}
|
|
|
|
/*
|
|
* Treat NCR53C90 with the 86C01 DMA chip exactly as ESP100
|
|
* from now on.
|
|
*/
|
|
if (sc->sc_rev == NCR_VARIANT_NCR53C90_86C01)
|
|
sc->sc_rev = NCR_VARIANT_ESP100;
|
|
|
|
sc->sc_ccf = FREQTOCCF(sc->sc_freq);
|
|
|
|
/* The value *must not* be == 1. Make it 2. */
|
|
if (sc->sc_ccf == 1)
|
|
sc->sc_ccf = 2;
|
|
|
|
/*
|
|
* The recommended timeout is 250ms. This register is loaded
|
|
* with a value calculated as follows, from the docs:
|
|
*
|
|
* (timout period) x (CLK frequency)
|
|
* reg = -------------------------------------
|
|
* 8192 x (Clock Conversion Factor)
|
|
*
|
|
* Since CCF has a linear relation to CLK, this generally computes
|
|
* to the constant of 153.
|
|
*/
|
|
sc->sc_timeout = ((250 * 1000) * sc->sc_freq) / (8192 * sc->sc_ccf);
|
|
|
|
/* The CCF register only has 3 bits; 0 is actually 8. */
|
|
sc->sc_ccf &= 7;
|
|
|
|
/*
|
|
* Register with CAM.
|
|
*/
|
|
devq = cam_simq_alloc(sc->sc_ntarg);
|
|
if (devq == NULL) {
|
|
device_printf(sc->sc_dev, "cannot allocate device queue\n");
|
|
error = ENOMEM;
|
|
goto fail_tinfo;
|
|
}
|
|
|
|
sim = cam_sim_alloc(ncr53c9x_action, ncr53c9x_poll, "esp", sc,
|
|
device_get_unit(sc->sc_dev), &sc->sc_lock, 1, NCR_TAG_DEPTH, devq);
|
|
if (sim == NULL) {
|
|
device_printf(sc->sc_dev, "cannot allocate SIM entry\n");
|
|
error = ENOMEM;
|
|
goto fail_devq;
|
|
}
|
|
|
|
NCR_LOCK(sc);
|
|
|
|
if (xpt_bus_register(sim, sc->sc_dev, 0) != CAM_SUCCESS) {
|
|
device_printf(sc->sc_dev, "cannot register bus\n");
|
|
error = EIO;
|
|
goto fail_lock;
|
|
}
|
|
|
|
if (xpt_create_path(&path, NULL, cam_sim_path(sim),
|
|
CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD) != CAM_REQ_CMP) {
|
|
device_printf(sc->sc_dev, "cannot create path\n");
|
|
error = EIO;
|
|
goto fail_bus;
|
|
}
|
|
|
|
if (xpt_register_async(AC_LOST_DEVICE, ncr53c9x_async, sim, path) !=
|
|
CAM_REQ_CMP) {
|
|
device_printf(sc->sc_dev, "cannot register async handler\n");
|
|
error = EIO;
|
|
goto fail_path;
|
|
}
|
|
|
|
sc->sc_sim = sim;
|
|
sc->sc_path = path;
|
|
|
|
/* Reset state and bus. */
|
|
#if 0
|
|
sc->sc_cfflags = sc->sc_dev.dv_cfdata->cf_flags;
|
|
#else
|
|
sc->sc_cfflags = 0;
|
|
#endif
|
|
sc->sc_state = 0;
|
|
ncr53c9x_init(sc, 1);
|
|
|
|
TAILQ_INIT(&sc->free_list);
|
|
if ((sc->ecb_array =
|
|
malloc(sizeof(struct ncr53c9x_ecb) * NCR_TAG_DEPTH, M_DEVBUF,
|
|
M_NOWAIT | M_ZERO)) == NULL) {
|
|
device_printf(sc->sc_dev, "cannot allocate ECB array\n");
|
|
error = ENOMEM;
|
|
goto fail_async;
|
|
}
|
|
for (i = 0; i < NCR_TAG_DEPTH; i++) {
|
|
ecb = &sc->ecb_array[i];
|
|
ecb->sc = sc;
|
|
ecb->tag_id = i;
|
|
TAILQ_INSERT_HEAD(&sc->free_list, ecb, free_links);
|
|
}
|
|
|
|
callout_reset(&sc->sc_watchdog, 60 * hz, ncr53c9x_watch, sc);
|
|
|
|
NCR_UNLOCK(sc);
|
|
|
|
return (0);
|
|
|
|
fail_async:
|
|
xpt_register_async(0, ncr53c9x_async, sim, path);
|
|
fail_path:
|
|
xpt_free_path(path);
|
|
fail_bus:
|
|
xpt_bus_deregister(cam_sim_path(sim));
|
|
fail_lock:
|
|
NCR_UNLOCK(sc);
|
|
cam_sim_free(sim, TRUE);
|
|
fail_devq:
|
|
cam_simq_free(devq);
|
|
fail_tinfo:
|
|
free(sc->sc_tinfo, M_DEVBUF);
|
|
fail_imess:
|
|
if (sc->sc_imess_self)
|
|
free(sc->sc_imess, M_DEVBUF);
|
|
fail_omess:
|
|
if (sc->sc_omess_self)
|
|
free(sc->sc_omess, M_DEVBUF);
|
|
return (error);
|
|
}
|
|
|
|
int
|
|
ncr53c9x_detach(struct ncr53c9x_softc *sc)
|
|
{
|
|
struct ncr53c9x_linfo *li, *nextli;
|
|
int t;
|
|
|
|
callout_drain(&sc->sc_watchdog);
|
|
|
|
NCR_LOCK(sc);
|
|
|
|
if (sc->sc_tinfo) {
|
|
/* Cancel all commands. */
|
|
ncr53c9x_clear(sc, CAM_REQ_ABORTED);
|
|
|
|
/* Free logical units. */
|
|
for (t = 0; t < sc->sc_ntarg; t++) {
|
|
for (li = LIST_FIRST(&sc->sc_tinfo[t].luns); li;
|
|
li = nextli) {
|
|
nextli = LIST_NEXT(li, link);
|
|
free(li, M_DEVBUF);
|
|
}
|
|
}
|
|
}
|
|
|
|
xpt_register_async(0, ncr53c9x_async, sc->sc_sim, sc->sc_path);
|
|
xpt_free_path(sc->sc_path);
|
|
xpt_bus_deregister(cam_sim_path(sc->sc_sim));
|
|
|
|
NCR_UNLOCK(sc);
|
|
|
|
cam_sim_free(sc->sc_sim, TRUE);
|
|
free(sc->ecb_array, M_DEVBUF);
|
|
free(sc->sc_tinfo, M_DEVBUF);
|
|
if (sc->sc_imess_self)
|
|
free(sc->sc_imess, M_DEVBUF);
|
|
if (sc->sc_omess_self)
|
|
free(sc->sc_omess, M_DEVBUF);
|
|
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* This is the generic ncr53c9x reset function. It does not reset the SCSI
|
|
* bus, only this controller, but kills any on-going commands, and also stops
|
|
* and resets the DMA.
|
|
*
|
|
* After reset, registers are loaded with the defaults from the attach
|
|
* routine above.
|
|
*/
|
|
static void
|
|
ncr53c9x_reset(struct ncr53c9x_softc *sc)
|
|
{
|
|
|
|
NCR_LOCK_ASSERT(sc, MA_OWNED);
|
|
|
|
/* Reset DMA first. */
|
|
NCRDMA_RESET(sc);
|
|
|
|
/* Reset SCSI chip. */
|
|
NCRCMD(sc, NCRCMD_RSTCHIP);
|
|
NCRCMD(sc, NCRCMD_NOP);
|
|
DELAY(500);
|
|
|
|
/* Do these backwards, and fall through. */
|
|
switch (sc->sc_rev) {
|
|
case NCR_VARIANT_ESP406:
|
|
case NCR_VARIANT_FAS408:
|
|
NCR_WRITE_REG(sc, NCR_CFG5, sc->sc_cfg5 | NCRCFG5_SINT);
|
|
NCR_WRITE_REG(sc, NCR_CFG4, sc->sc_cfg4);
|
|
/* FALLTHROUGH */
|
|
case NCR_VARIANT_AM53C974:
|
|
case NCR_VARIANT_FAS100A:
|
|
case NCR_VARIANT_FAS216:
|
|
case NCR_VARIANT_FAS236:
|
|
case NCR_VARIANT_NCR53C94:
|
|
case NCR_VARIANT_NCR53C96:
|
|
case NCR_VARIANT_ESP200:
|
|
sc->sc_features |= NCR_F_HASCFG3;
|
|
NCR_WRITE_REG(sc, NCR_CFG3, sc->sc_cfg3);
|
|
/* FALLTHROUGH */
|
|
case NCR_VARIANT_ESP100A:
|
|
sc->sc_features |= NCR_F_SELATN3;
|
|
NCR_WRITE_REG(sc, NCR_CFG2, sc->sc_cfg2);
|
|
/* FALLTHROUGH */
|
|
case NCR_VARIANT_ESP100:
|
|
NCR_WRITE_REG(sc, NCR_CFG1, sc->sc_cfg1);
|
|
NCR_WRITE_REG(sc, NCR_CCF, sc->sc_ccf);
|
|
NCR_WRITE_REG(sc, NCR_SYNCOFF, 0);
|
|
NCR_WRITE_REG(sc, NCR_TIMEOUT, sc->sc_timeout);
|
|
break;
|
|
|
|
case NCR_VARIANT_FAS366:
|
|
sc->sc_features |=
|
|
NCR_F_HASCFG3 | NCR_F_FASTSCSI | NCR_F_SELATN3;
|
|
sc->sc_cfg3 = NCRFASCFG3_FASTCLK | NCRFASCFG3_OBAUTO;
|
|
if (sc->sc_id > 7)
|
|
sc->sc_cfg3 |= NCRFASCFG3_IDBIT3;
|
|
sc->sc_cfg3_fscsi = NCRFASCFG3_FASTSCSI;
|
|
NCR_WRITE_REG(sc, NCR_CFG3, sc->sc_cfg3);
|
|
sc->sc_cfg2 = NCRCFG2_HMEFE | NCRCFG2_HME32;
|
|
NCR_WRITE_REG(sc, NCR_CFG2, sc->sc_cfg2);
|
|
NCR_WRITE_REG(sc, NCR_CFG1, sc->sc_cfg1);
|
|
NCR_WRITE_REG(sc, NCR_CCF, sc->sc_ccf);
|
|
NCR_WRITE_REG(sc, NCR_SYNCOFF, 0);
|
|
NCR_WRITE_REG(sc, NCR_TIMEOUT, sc->sc_timeout);
|
|
break;
|
|
|
|
default:
|
|
device_printf(sc->sc_dev,
|
|
"unknown revision code, assuming ESP100\n");
|
|
NCR_WRITE_REG(sc, NCR_CFG1, sc->sc_cfg1);
|
|
NCR_WRITE_REG(sc, NCR_CCF, sc->sc_ccf);
|
|
NCR_WRITE_REG(sc, NCR_SYNCOFF, 0);
|
|
NCR_WRITE_REG(sc, NCR_TIMEOUT, sc->sc_timeout);
|
|
}
|
|
|
|
if (sc->sc_rev == NCR_VARIANT_AM53C974)
|
|
NCR_WRITE_REG(sc, NCR_AMDCFG4, sc->sc_cfg4);
|
|
|
|
#if 0
|
|
device_printf(sc->sc_dev, "ncr53c9x_reset: revision %d\n",
|
|
sc->sc_rev);
|
|
device_printf(sc->sc_dev, "ncr53c9x_reset: cfg1 0x%x, cfg2 0x%x, "
|
|
"cfg3 0x%x, ccf 0x%x, timeout 0x%x\n",
|
|
sc->sc_cfg1, sc->sc_cfg2, sc->sc_cfg3, sc->sc_ccf, sc->sc_timeout);
|
|
#endif
|
|
}
|
|
|
|
/*
|
|
* Clear all commands.
|
|
*/
|
|
static void
|
|
ncr53c9x_clear(struct ncr53c9x_softc *sc, cam_status result)
|
|
{
|
|
struct ncr53c9x_ecb *ecb;
|
|
int r;
|
|
|
|
NCR_LOCK_ASSERT(sc, MA_OWNED);
|
|
|
|
/* Cancel any active commands. */
|
|
sc->sc_state = NCR_CLEANING;
|
|
sc->sc_msgify = 0;
|
|
if ((ecb = sc->sc_nexus) != NULL) {
|
|
ecb->ccb->ccb_h.status = result;
|
|
ncr53c9x_done(sc, ecb);
|
|
}
|
|
/* Cancel outstanding disconnected commands. */
|
|
for (r = 0; r < sc->sc_ntarg; r++)
|
|
ncr53c9x_clear_target(sc, r, result);
|
|
}
|
|
|
|
/*
|
|
* Clear all commands for a specific target.
|
|
*/
|
|
static void
|
|
ncr53c9x_clear_target(struct ncr53c9x_softc *sc, int target,
|
|
cam_status result)
|
|
{
|
|
struct ncr53c9x_ecb *ecb;
|
|
struct ncr53c9x_linfo *li;
|
|
int i;
|
|
|
|
NCR_LOCK_ASSERT(sc, MA_OWNED);
|
|
|
|
/* Cancel outstanding disconnected commands on each LUN. */
|
|
LIST_FOREACH(li, &sc->sc_tinfo[target].luns, link) {
|
|
if ((ecb = li->untagged) != NULL) {
|
|
li->untagged = NULL;
|
|
/*
|
|
* XXX should we terminate a command
|
|
* that never reached the disk?
|
|
*/
|
|
li->busy = 0;
|
|
ecb->ccb->ccb_h.status = result;
|
|
ncr53c9x_done(sc, ecb);
|
|
}
|
|
for (i = 0; i < NCR_TAG_DEPTH; i++)
|
|
if ((ecb = li->queued[i])) {
|
|
li->queued[i] = NULL;
|
|
ecb->ccb->ccb_h.status = result;
|
|
ncr53c9x_done(sc, ecb);
|
|
}
|
|
li->used = 0;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Initialize ncr53c9x state machine.
|
|
*/
|
|
static void
|
|
ncr53c9x_init(struct ncr53c9x_softc *sc, int doreset)
|
|
{
|
|
struct ncr53c9x_tinfo *ti;
|
|
int r;
|
|
|
|
NCR_LOCK_ASSERT(sc, MA_OWNED);
|
|
|
|
NCR_MISC(("[NCR_INIT(%d) %d] ", doreset, sc->sc_state));
|
|
|
|
if (sc->sc_state == 0) {
|
|
/* First time through; initialize. */
|
|
|
|
TAILQ_INIT(&sc->ready_list);
|
|
sc->sc_nexus = NULL;
|
|
memset(sc->sc_tinfo, 0, sizeof(sc->sc_tinfo));
|
|
for (r = 0; r < sc->sc_ntarg; r++) {
|
|
LIST_INIT(&sc->sc_tinfo[r].luns);
|
|
}
|
|
} else
|
|
ncr53c9x_clear(sc, CAM_CMD_TIMEOUT);
|
|
|
|
/*
|
|
* Reset the chip to a known state.
|
|
*/
|
|
ncr53c9x_reset(sc);
|
|
|
|
sc->sc_flags = 0;
|
|
sc->sc_msgpriq = sc->sc_msgout = sc->sc_msgoutq = 0;
|
|
sc->sc_phase = sc->sc_prevphase = INVALID_PHASE;
|
|
|
|
/*
|
|
* If we're the first time through, set the default parameters
|
|
* for all targets. Otherwise we only clear their current transfer
|
|
* settings so we'll renegotiate their goal settings with the next
|
|
* command.
|
|
*/
|
|
if (sc->sc_state == 0) {
|
|
for (r = 0; r < sc->sc_ntarg; r++) {
|
|
ti = &sc->sc_tinfo[r];
|
|
/* XXX - config flags per target: low bits: no reselect; high bits: no synch */
|
|
|
|
ti->flags = ((sc->sc_minsync != 0 &&
|
|
(sc->sc_cfflags & (1 << ((r & 7) + 8))) == 0) ?
|
|
0 : T_SYNCHOFF) |
|
|
((sc->sc_cfflags & (1 << (r & 7))) == 0 ?
|
|
0 : T_RSELECTOFF);
|
|
ti->curr.period = ti->goal.period = 0;
|
|
ti->curr.offset = ti->goal.offset = 0;
|
|
ti->curr.width = ti->goal.width =
|
|
MSG_EXT_WDTR_BUS_8_BIT;
|
|
}
|
|
} else {
|
|
for (r = 0; r < sc->sc_ntarg; r++) {
|
|
ti = &sc->sc_tinfo[r];
|
|
ti->flags &= ~(T_SDTRSENT | T_WDTRSENT);
|
|
ti->curr.period = 0;
|
|
ti->curr.offset = 0;
|
|
ti->curr.width = MSG_EXT_WDTR_BUS_8_BIT;
|
|
}
|
|
}
|
|
|
|
if (doreset) {
|
|
sc->sc_state = NCR_SBR;
|
|
NCRCMD(sc, NCRCMD_RSTSCSI);
|
|
/* Give the bus a fighting chance to settle. */
|
|
DELAY(250000);
|
|
} else {
|
|
sc->sc_state = NCR_IDLE;
|
|
ncr53c9x_sched(sc);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Read the NCR registers, and save their contents for later use.
|
|
* NCR_STAT, NCR_STEP & NCR_INTR are mostly zeroed out when reading
|
|
* NCR_INTR - so make sure it is the last read.
|
|
*
|
|
* I think that (from reading the docs) most bits in these registers
|
|
* only make sense when the DMA CSR has an interrupt showing. Call only
|
|
* if an interrupt is pending.
|
|
*/
|
|
static inline void
|
|
ncr53c9x_readregs(struct ncr53c9x_softc *sc)
|
|
{
|
|
|
|
NCR_LOCK_ASSERT(sc, MA_OWNED);
|
|
|
|
sc->sc_espstat = NCR_READ_REG(sc, NCR_STAT);
|
|
/* Only the step bits are of interest. */
|
|
sc->sc_espstep = NCR_READ_REG(sc, NCR_STEP) & NCRSTEP_MASK;
|
|
|
|
if (sc->sc_rev == NCR_VARIANT_FAS366)
|
|
sc->sc_espstat2 = NCR_READ_REG(sc, NCR_STAT2);
|
|
|
|
sc->sc_espintr = NCR_READ_REG(sc, NCR_INTR);
|
|
|
|
if (sc->sc_glue->gl_clear_latched_intr != NULL)
|
|
(*sc->sc_glue->gl_clear_latched_intr)(sc);
|
|
|
|
/*
|
|
* Determine the SCSI bus phase, return either a real SCSI bus phase
|
|
* or some pseudo phase we use to detect certain exceptions.
|
|
*/
|
|
sc->sc_phase = (sc->sc_espintr & NCRINTR_DIS) ?
|
|
BUSFREE_PHASE : sc->sc_espstat & NCRSTAT_PHASE;
|
|
|
|
NCR_INTS(("regs[intr=%02x,stat=%02x,step=%02x,stat2=%02x] ",
|
|
sc->sc_espintr, sc->sc_espstat, sc->sc_espstep, sc->sc_espstat2));
|
|
}
|
|
|
|
/*
|
|
* Convert Synchronous Transfer Period to chip register Clock Per Byte value.
|
|
*/
|
|
static inline int
|
|
ncr53c9x_stp2cpb(struct ncr53c9x_softc *sc, int period)
|
|
{
|
|
int v;
|
|
|
|
NCR_LOCK_ASSERT(sc, MA_OWNED);
|
|
|
|
v = (sc->sc_freq * period) / 250;
|
|
if (ncr53c9x_cpb2stp(sc, v) < period)
|
|
/* Correct round-down error. */
|
|
v++;
|
|
return (v);
|
|
}
|
|
|
|
static inline void
|
|
ncr53c9x_setsync(struct ncr53c9x_softc *sc, struct ncr53c9x_tinfo *ti)
|
|
{
|
|
u_char cfg3, syncoff, synctp;
|
|
|
|
NCR_LOCK_ASSERT(sc, MA_OWNED);
|
|
|
|
cfg3 = sc->sc_cfg3;
|
|
if (ti->curr.offset != 0) {
|
|
syncoff = ti->curr.offset;
|
|
synctp = ncr53c9x_stp2cpb(sc, ti->curr.period);
|
|
if (sc->sc_features & NCR_F_FASTSCSI) {
|
|
/*
|
|
* If the period is 200ns or less (ti->period <= 50),
|
|
* put the chip in Fast SCSI mode.
|
|
*/
|
|
if (ti->curr.period <= 50)
|
|
/*
|
|
* There are (at least) 4 variations of the
|
|
* configuration 3 register. The drive attach
|
|
* routine sets the appropriate bit to put the
|
|
* chip into Fast SCSI mode so that it doesn't
|
|
* have to be figured out here each time.
|
|
*/
|
|
cfg3 |= sc->sc_cfg3_fscsi;
|
|
}
|
|
|
|
/*
|
|
* Am53c974 requires different SYNCTP values when the
|
|
* FSCSI bit is off.
|
|
*/
|
|
if (sc->sc_rev == NCR_VARIANT_AM53C974 &&
|
|
(cfg3 & NCRAMDCFG3_FSCSI) == 0)
|
|
synctp--;
|
|
} else {
|
|
syncoff = 0;
|
|
synctp = 0;
|
|
}
|
|
|
|
if (ti->curr.width != MSG_EXT_WDTR_BUS_8_BIT) {
|
|
if (sc->sc_rev == NCR_VARIANT_FAS366)
|
|
cfg3 |= NCRFASCFG3_EWIDE;
|
|
}
|
|
|
|
if (sc->sc_features & NCR_F_HASCFG3)
|
|
NCR_WRITE_REG(sc, NCR_CFG3, cfg3);
|
|
|
|
NCR_WRITE_REG(sc, NCR_SYNCOFF, syncoff);
|
|
NCR_WRITE_REG(sc, NCR_SYNCTP, synctp);
|
|
}
|
|
|
|
/*
|
|
* Send a command to a target, set the driver state to NCR_SELECTING
|
|
* and let the caller take care of the rest.
|
|
*
|
|
* Keeping this as a function allows me to say that this may be done
|
|
* by DMA instead of programmed I/O soon.
|
|
*/
|
|
static void
|
|
ncr53c9x_select(struct ncr53c9x_softc *sc, struct ncr53c9x_ecb *ecb)
|
|
{
|
|
struct ncr53c9x_tinfo *ti;
|
|
u_char *cmd;
|
|
size_t dmasize;
|
|
int clen, selatn3, selatns;
|
|
int lun = ecb->ccb->ccb_h.target_lun;
|
|
int target = ecb->ccb->ccb_h.target_id;
|
|
|
|
NCR_LOCK_ASSERT(sc, MA_OWNED);
|
|
|
|
NCR_TRACE(("[ncr53c9x_select(t%d,l%d,cmd:%x,tag:%x,%x)] ",
|
|
target, lun, ecb->cmd.cmd.opcode, ecb->tag[0], ecb->tag[1]));
|
|
|
|
ti = &sc->sc_tinfo[target];
|
|
sc->sc_state = NCR_SELECTING;
|
|
/*
|
|
* Schedule the callout now, the first time we will go away
|
|
* expecting to come back due to an interrupt, because it is
|
|
* always possible that the interrupt may never happen.
|
|
*/
|
|
callout_reset(&ecb->ch, mstohz(ecb->timeout), ncr53c9x_callout, ecb);
|
|
|
|
/*
|
|
* The docs say the target register is never reset, and I
|
|
* can't think of a better place to set it.
|
|
*/
|
|
if (sc->sc_rev == NCR_VARIANT_FAS366) {
|
|
NCRCMD(sc, NCRCMD_FLUSH);
|
|
NCR_WRITE_REG(sc, NCR_SELID, target | NCR_BUSID_HMEXC32 |
|
|
NCR_BUSID_HMEENCID);
|
|
} else {
|
|
NCR_WRITE_REG(sc, NCR_SELID, target);
|
|
}
|
|
|
|
/*
|
|
* If we are requesting sense, force a renegotiation if we are
|
|
* currently using anything different from asynchronous at 8 bit
|
|
* as the target might have lost our transfer negotiations.
|
|
*/
|
|
if ((ecb->flags & ECB_SENSE) != 0 && (ti->curr.offset != 0 ||
|
|
ti->curr.width != MSG_EXT_WDTR_BUS_8_BIT)) {
|
|
ti->curr.period = 0;
|
|
ti->curr.offset = 0;
|
|
ti->curr.width = MSG_EXT_WDTR_BUS_8_BIT;
|
|
}
|
|
ncr53c9x_setsync(sc, ti);
|
|
|
|
selatn3 = selatns = 0;
|
|
if (ecb->tag[0] != 0) {
|
|
if (sc->sc_features & NCR_F_SELATN3)
|
|
/* Use SELATN3 to send tag messages. */
|
|
selatn3 = 1;
|
|
else
|
|
/* We don't have SELATN3; use SELATNS to send tags. */
|
|
selatns = 1;
|
|
}
|
|
|
|
if (ti->curr.period != ti->goal.period ||
|
|
ti->curr.offset != ti->goal.offset ||
|
|
ti->curr.width != ti->goal.width) {
|
|
/* We have to use SELATNS to send sync/wide messages. */
|
|
selatn3 = 0;
|
|
selatns = 1;
|
|
}
|
|
|
|
cmd = (u_char *)&ecb->cmd.cmd;
|
|
|
|
if (selatn3) {
|
|
/* We'll use tags with SELATN3. */
|
|
clen = ecb->clen + 3;
|
|
cmd -= 3;
|
|
cmd[0] = MSG_IDENTIFY(lun, 1); /* msg[0] */
|
|
cmd[1] = ecb->tag[0]; /* msg[1] */
|
|
cmd[2] = ecb->tag[1]; /* msg[2] */
|
|
} else {
|
|
/* We don't have tags, or will send messages with SELATNS. */
|
|
clen = ecb->clen + 1;
|
|
cmd -= 1;
|
|
cmd[0] = MSG_IDENTIFY(lun, (ti->flags & T_RSELECTOFF) == 0);
|
|
}
|
|
|
|
if ((sc->sc_features & NCR_F_DMASELECT) && !selatns) {
|
|
/* Setup DMA transfer for command. */
|
|
dmasize = clen;
|
|
sc->sc_cmdlen = clen;
|
|
sc->sc_cmdp = cmd;
|
|
NCRDMA_SETUP(sc, &sc->sc_cmdp, &sc->sc_cmdlen, 0, &dmasize);
|
|
/* Program the SCSI counter. */
|
|
NCR_SET_COUNT(sc, dmasize);
|
|
|
|
/* Load the count in. */
|
|
/* if (sc->sc_rev != NCR_VARIANT_FAS366) */
|
|
NCRCMD(sc, NCRCMD_NOP | NCRCMD_DMA);
|
|
|
|
/* And get the target's attention. */
|
|
if (selatn3) {
|
|
sc->sc_msgout = SEND_TAG;
|
|
sc->sc_flags |= NCR_ATN;
|
|
NCRCMD(sc, NCRCMD_SELATN3 | NCRCMD_DMA);
|
|
} else
|
|
NCRCMD(sc, NCRCMD_SELATN | NCRCMD_DMA);
|
|
NCRDMA_GO(sc);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Who am I? This is where we tell the target that we are
|
|
* happy for it to disconnect etc.
|
|
*/
|
|
|
|
/* Now get the command into the FIFO. */
|
|
ncr53c9x_wrfifo(sc, cmd, clen);
|
|
|
|
/* And get the target's attention. */
|
|
if (selatns) {
|
|
NCR_MSGS(("SELATNS \n"));
|
|
/* Arbitrate, select and stop after IDENTIFY message. */
|
|
NCRCMD(sc, NCRCMD_SELATNS);
|
|
} else if (selatn3) {
|
|
sc->sc_msgout = SEND_TAG;
|
|
sc->sc_flags |= NCR_ATN;
|
|
NCRCMD(sc, NCRCMD_SELATN3);
|
|
} else
|
|
NCRCMD(sc, NCRCMD_SELATN);
|
|
}
|
|
|
|
static void
|
|
ncr53c9x_free_ecb(struct ncr53c9x_softc *sc, struct ncr53c9x_ecb *ecb)
|
|
{
|
|
|
|
NCR_LOCK_ASSERT(sc, MA_OWNED);
|
|
|
|
ecb->flags = 0;
|
|
TAILQ_INSERT_TAIL(&sc->free_list, ecb, free_links);
|
|
}
|
|
|
|
static struct ncr53c9x_ecb *
|
|
ncr53c9x_get_ecb(struct ncr53c9x_softc *sc)
|
|
{
|
|
struct ncr53c9x_ecb *ecb;
|
|
|
|
NCR_LOCK_ASSERT(sc, MA_OWNED);
|
|
|
|
ecb = TAILQ_FIRST(&sc->free_list);
|
|
if (ecb) {
|
|
if (ecb->flags != 0)
|
|
panic("ecb flags not cleared\n");
|
|
TAILQ_REMOVE(&sc->free_list, ecb, free_links);
|
|
ecb->flags = ECB_ALLOC;
|
|
bzero(&ecb->ccb, sizeof(struct ncr53c9x_ecb) -
|
|
offsetof(struct ncr53c9x_ecb, ccb));
|
|
}
|
|
return (ecb);
|
|
}
|
|
|
|
/*
|
|
* DRIVER FUNCTIONS CALLABLE FROM HIGHER LEVEL DRIVERS:
|
|
*/
|
|
|
|
/*
|
|
* Start a SCSI-command.
|
|
* This function is called by the higher level SCSI-driver to queue/run
|
|
* SCSI-commands.
|
|
*/
|
|
|
|
static void
|
|
ncr53c9x_action(struct cam_sim *sim, union ccb *ccb)
|
|
{
|
|
struct ccb_pathinq *cpi;
|
|
struct ccb_scsiio *csio;
|
|
struct ccb_trans_settings *cts;
|
|
struct ccb_trans_settings_scsi *scsi;
|
|
struct ccb_trans_settings_spi *spi;
|
|
struct ncr53c9x_ecb *ecb;
|
|
struct ncr53c9x_softc *sc;
|
|
struct ncr53c9x_tinfo *ti;
|
|
int target;
|
|
|
|
sc = cam_sim_softc(sim);
|
|
|
|
NCR_LOCK_ASSERT(sc, MA_OWNED);
|
|
|
|
NCR_TRACE(("[ncr53c9x_action %d]", ccb->ccb_h.func_code));
|
|
|
|
switch (ccb->ccb_h.func_code) {
|
|
case XPT_RESET_BUS:
|
|
ncr53c9x_init(sc, 1);
|
|
ccb->ccb_h.status = CAM_REQ_CMP;
|
|
xpt_done(ccb);
|
|
return;
|
|
|
|
case XPT_CALC_GEOMETRY:
|
|
cam_calc_geometry(&ccb->ccg, sc->sc_extended_geom);
|
|
xpt_done(ccb);
|
|
return;
|
|
|
|
case XPT_PATH_INQ:
|
|
cpi = &ccb->cpi;
|
|
cpi->version_num = 1;
|
|
cpi->hba_inquiry = PI_SDTR_ABLE | PI_TAG_ABLE;
|
|
cpi->hba_inquiry |=
|
|
(sc->sc_rev == NCR_VARIANT_FAS366) ? PI_WIDE_16 : 0;
|
|
cpi->target_sprt = 0;
|
|
cpi->hba_misc = 0;
|
|
cpi->hba_eng_cnt = 0;
|
|
cpi->max_target = sc->sc_ntarg - 1;
|
|
cpi->max_lun = 7;
|
|
cpi->initiator_id = sc->sc_id;
|
|
cpi->bus_id = 0;
|
|
cpi->base_transfer_speed = 3300;
|
|
strncpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN);
|
|
strncpy(cpi->hba_vid, "Sun", HBA_IDLEN);
|
|
strncpy(cpi->dev_name, cam_sim_name(sim), DEV_IDLEN);
|
|
cpi->unit_number = cam_sim_unit(sim);
|
|
cpi->transport = XPORT_SPI;
|
|
cpi->transport_version = 2;
|
|
cpi->protocol = PROTO_SCSI;
|
|
cpi->protocol_version = SCSI_REV_2;
|
|
ccb->ccb_h.status = CAM_REQ_CMP;
|
|
xpt_done(ccb);
|
|
return;
|
|
|
|
case XPT_GET_TRAN_SETTINGS:
|
|
cts = &ccb->cts;
|
|
ti = &sc->sc_tinfo[ccb->ccb_h.target_id];
|
|
scsi = &cts->proto_specific.scsi;
|
|
spi = &cts->xport_specific.spi;
|
|
|
|
cts->protocol = PROTO_SCSI;
|
|
cts->protocol_version = SCSI_REV_2;
|
|
cts->transport = XPORT_SPI;
|
|
cts->transport_version = 2;
|
|
|
|
if (cts->type == CTS_TYPE_CURRENT_SETTINGS) {
|
|
spi->sync_period = ti->curr.period;
|
|
spi->sync_offset = ti->curr.offset;
|
|
spi->bus_width = ti->curr.width;
|
|
if ((ti->flags & T_TAG) != 0) {
|
|
spi->flags |= CTS_SPI_FLAGS_DISC_ENB;
|
|
scsi->flags |= CTS_SCSI_FLAGS_TAG_ENB;
|
|
} else {
|
|
spi->flags &= ~CTS_SPI_FLAGS_DISC_ENB;
|
|
scsi->flags &= ~CTS_SCSI_FLAGS_TAG_ENB;
|
|
}
|
|
} else {
|
|
if ((ti->flags & T_SYNCHOFF) != 0) {
|
|
spi->sync_period = 0;
|
|
spi->sync_offset = 0;
|
|
} else {
|
|
spi->sync_period = sc->sc_minsync;
|
|
spi->sync_offset = sc->sc_maxoffset;
|
|
}
|
|
spi->bus_width = sc->sc_maxwidth;
|
|
spi->flags |= CTS_SPI_FLAGS_DISC_ENB;
|
|
scsi->flags |= CTS_SCSI_FLAGS_TAG_ENB;
|
|
}
|
|
spi->valid =
|
|
CTS_SPI_VALID_BUS_WIDTH |
|
|
CTS_SPI_VALID_SYNC_RATE |
|
|
CTS_SPI_VALID_SYNC_OFFSET |
|
|
CTS_SPI_VALID_DISC;
|
|
scsi->valid = CTS_SCSI_VALID_TQ;
|
|
ccb->ccb_h.status = CAM_REQ_CMP;
|
|
xpt_done(ccb);
|
|
return;
|
|
|
|
case XPT_ABORT:
|
|
device_printf(sc->sc_dev, "XPT_ABORT called\n");
|
|
ccb->ccb_h.status = CAM_FUNC_NOTAVAIL;
|
|
xpt_done(ccb);
|
|
return;
|
|
|
|
case XPT_TERM_IO:
|
|
device_printf(sc->sc_dev, "XPT_TERM_IO called\n");
|
|
ccb->ccb_h.status = CAM_FUNC_NOTAVAIL;
|
|
xpt_done(ccb);
|
|
return;
|
|
|
|
case XPT_RESET_DEV:
|
|
case XPT_SCSI_IO:
|
|
if (ccb->ccb_h.target_id < 0 ||
|
|
ccb->ccb_h.target_id >= sc->sc_ntarg) {
|
|
ccb->ccb_h.status = CAM_PATH_INVALID;
|
|
xpt_done(ccb);
|
|
return;
|
|
}
|
|
/* Get an ECB to use. */
|
|
ecb = ncr53c9x_get_ecb(sc);
|
|
/*
|
|
* This should never happen as we track resources
|
|
* in the mid-layer.
|
|
*/
|
|
if (ecb == NULL) {
|
|
xpt_freeze_simq(sim, 1);
|
|
ccb->ccb_h.status = CAM_REQUEUE_REQ;
|
|
device_printf(sc->sc_dev, "unable to allocate ecb\n");
|
|
xpt_done(ccb);
|
|
return;
|
|
}
|
|
|
|
/* Initialize ecb. */
|
|
ecb->ccb = ccb;
|
|
ecb->timeout = ccb->ccb_h.timeout;
|
|
|
|
if (ccb->ccb_h.func_code == XPT_RESET_DEV) {
|
|
ecb->flags |= ECB_RESET;
|
|
ecb->clen = 0;
|
|
ecb->dleft = 0;
|
|
} else {
|
|
csio = &ccb->csio;
|
|
if ((ccb->ccb_h.flags & CAM_CDB_POINTER) != 0)
|
|
bcopy(csio->cdb_io.cdb_ptr, &ecb->cmd.cmd,
|
|
csio->cdb_len);
|
|
else
|
|
bcopy(csio->cdb_io.cdb_bytes, &ecb->cmd.cmd,
|
|
csio->cdb_len);
|
|
ecb->clen = csio->cdb_len;
|
|
ecb->daddr = csio->data_ptr;
|
|
ecb->dleft = csio->dxfer_len;
|
|
}
|
|
ecb->stat = 0;
|
|
|
|
TAILQ_INSERT_TAIL(&sc->ready_list, ecb, chain);
|
|
ecb->flags |= ECB_READY;
|
|
if (sc->sc_state == NCR_IDLE)
|
|
ncr53c9x_sched(sc);
|
|
break;
|
|
|
|
case XPT_SET_TRAN_SETTINGS:
|
|
cts = &ccb->cts;
|
|
target = ccb->ccb_h.target_id;
|
|
ti = &sc->sc_tinfo[target];
|
|
scsi = &cts->proto_specific.scsi;
|
|
spi = &cts->xport_specific.spi;
|
|
|
|
if ((scsi->valid & CTS_SCSI_VALID_TQ) != 0) {
|
|
if ((sc->sc_cfflags & (1<<((target & 7) + 16))) == 0 &&
|
|
(scsi->flags & CTS_SCSI_FLAGS_TAG_ENB)) {
|
|
NCR_MISC(("%s: target %d: tagged queuing\n",
|
|
device_get_nameunit(sc->sc_dev), target));
|
|
ti->flags |= T_TAG;
|
|
} else
|
|
ti->flags &= ~T_TAG;
|
|
}
|
|
|
|
if ((spi->valid & CTS_SPI_VALID_BUS_WIDTH) != 0) {
|
|
NCR_MISC(("%s: target %d: wide negotiation\n",
|
|
device_get_nameunit(sc->sc_dev), target));
|
|
ti->goal.width = spi->bus_width;
|
|
}
|
|
|
|
if ((spi->valid & CTS_SPI_VALID_SYNC_RATE) != 0) {
|
|
NCR_MISC(("%s: target %d: sync period negotiation\n",
|
|
device_get_nameunit(sc->sc_dev), target));
|
|
ti->goal.period = spi->sync_period;
|
|
}
|
|
|
|
if ((spi->valid & CTS_SPI_VALID_SYNC_OFFSET) != 0) {
|
|
NCR_MISC(("%s: target %d: sync offset negotiation\n",
|
|
device_get_nameunit(sc->sc_dev), target));
|
|
ti->goal.offset = spi->sync_offset;
|
|
}
|
|
|
|
ccb->ccb_h.status = CAM_REQ_CMP;
|
|
xpt_done(ccb);
|
|
return;
|
|
|
|
default:
|
|
device_printf(sc->sc_dev, "Unhandled function code %d\n",
|
|
ccb->ccb_h.func_code);
|
|
ccb->ccb_h.status = CAM_PROVIDE_FAIL;
|
|
xpt_done(ccb);
|
|
return;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Used when interrupt driven I/O is not allowed, e.g. during boot.
|
|
*/
|
|
static void
|
|
ncr53c9x_poll(struct cam_sim *sim)
|
|
{
|
|
struct ncr53c9x_softc *sc;
|
|
|
|
sc = cam_sim_softc(sim);
|
|
|
|
NCR_LOCK_ASSERT(sc, MA_OWNED);
|
|
|
|
NCR_TRACE(("[ncr53c9x_poll] "));
|
|
|
|
if (NCRDMA_ISINTR(sc))
|
|
ncr53c9x_intr1(sc);
|
|
}
|
|
|
|
/*
|
|
* Asynchronous notification handler
|
|
*/
|
|
static void
|
|
ncr53c9x_async(void *cbarg, uint32_t code, struct cam_path *path, void *arg)
|
|
{
|
|
struct ncr53c9x_softc *sc;
|
|
struct ncr53c9x_tinfo *ti;
|
|
int target;
|
|
|
|
sc = cam_sim_softc(cbarg);
|
|
|
|
NCR_LOCK_ASSERT(sc, MA_OWNED);
|
|
|
|
switch (code) {
|
|
case AC_LOST_DEVICE:
|
|
target = xpt_path_target_id(path);
|
|
if (target < 0 || target >= sc->sc_ntarg)
|
|
break;
|
|
|
|
/* Cancel outstanding disconnected commands. */
|
|
ncr53c9x_clear_target(sc, target, CAM_REQ_ABORTED);
|
|
|
|
/* Set the default parameters for the target. */
|
|
ti = &sc->sc_tinfo[target];
|
|
/* XXX - config flags per target: low bits: no reselect; high bits: no synch */
|
|
ti->flags = ((sc->sc_minsync != 0 &&
|
|
(sc->sc_cfflags & (1 << ((target & 7) + 8))) == 0) ?
|
|
0 : T_SYNCHOFF) |
|
|
((sc->sc_cfflags & (1 << (target & 7))) == 0 ?
|
|
0 : T_RSELECTOFF);
|
|
ti->curr.period = ti->goal.period = 0;
|
|
ti->curr.offset = ti->goal.offset = 0;
|
|
ti->curr.width = ti->goal.width = MSG_EXT_WDTR_BUS_8_BIT;
|
|
break;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* LOW LEVEL SCSI UTILITIES
|
|
*/
|
|
|
|
/*
|
|
* Schedule a SCSI operation. This has now been pulled out of the interrupt
|
|
* handler so that we may call it from ncr53c9x_action and ncr53c9x_done.
|
|
* This may save us an unnecessary interrupt just to get things going.
|
|
* Should only be called when state == NCR_IDLE and with sc_lock held.
|
|
*/
|
|
static void
|
|
ncr53c9x_sched(struct ncr53c9x_softc *sc)
|
|
{
|
|
struct ncr53c9x_ecb *ecb;
|
|
struct ncr53c9x_linfo *li;
|
|
struct ncr53c9x_tinfo *ti;
|
|
int lun, tag;
|
|
|
|
NCR_LOCK_ASSERT(sc, MA_OWNED);
|
|
|
|
NCR_TRACE(("[ncr53c9x_sched] "));
|
|
|
|
if (sc->sc_state != NCR_IDLE)
|
|
panic("ncr53c9x_sched: not IDLE (state=%d)", sc->sc_state);
|
|
|
|
/*
|
|
* Find first ecb in ready queue that is for a target/lunit
|
|
* combinations that is not busy.
|
|
*/
|
|
TAILQ_FOREACH(ecb, &sc->ready_list, chain) {
|
|
ti = &sc->sc_tinfo[ecb->ccb->ccb_h.target_id];
|
|
lun = ecb->ccb->ccb_h.target_lun;
|
|
|
|
/* Select type of tag for this command */
|
|
if ((ti->flags & (T_RSELECTOFF | T_TAG)) != T_TAG)
|
|
tag = 0;
|
|
else if ((ecb->flags & ECB_SENSE) != 0)
|
|
tag = 0;
|
|
else if ((ecb->ccb->ccb_h.flags & CAM_TAG_ACTION_VALID) == 0)
|
|
tag = 0;
|
|
else if (ecb->ccb->csio.tag_action == CAM_TAG_ACTION_NONE)
|
|
tag = 0;
|
|
else
|
|
tag = ecb->ccb->csio.tag_action;
|
|
|
|
li = TINFO_LUN(ti, lun);
|
|
if (li == NULL) {
|
|
/* Initialize LUN info and add to list. */
|
|
if ((li = malloc(sizeof(*li),
|
|
M_DEVBUF, M_NOWAIT | M_ZERO)) == NULL) {
|
|
continue;
|
|
}
|
|
li->lun = lun;
|
|
|
|
LIST_INSERT_HEAD(&ti->luns, li, link);
|
|
if (lun < NCR_NLUN)
|
|
ti->lun[lun] = li;
|
|
}
|
|
li->last_used = time_second;
|
|
if (tag == 0) {
|
|
/* Try to issue this as an untagged command. */
|
|
if (li->untagged == NULL)
|
|
li->untagged = ecb;
|
|
}
|
|
if (li->untagged != NULL) {
|
|
tag = 0;
|
|
if ((li->busy != 1) && li->used == 0) {
|
|
/*
|
|
* We need to issue this untagged command
|
|
* now.
|
|
*/
|
|
ecb = li->untagged;
|
|
} else {
|
|
/* not ready, yet */
|
|
continue;
|
|
}
|
|
}
|
|
ecb->tag[0] = tag;
|
|
if (tag != 0) {
|
|
li->queued[ecb->tag_id] = ecb;
|
|
ecb->tag[1] = ecb->tag_id;
|
|
li->used++;
|
|
}
|
|
if (li->untagged != NULL && (li->busy != 1)) {
|
|
li->busy = 1;
|
|
TAILQ_REMOVE(&sc->ready_list, ecb, chain);
|
|
ecb->flags &= ~ECB_READY;
|
|
sc->sc_nexus = ecb;
|
|
ncr53c9x_select(sc, ecb);
|
|
break;
|
|
}
|
|
if (li->untagged == NULL && tag != 0) {
|
|
TAILQ_REMOVE(&sc->ready_list, ecb, chain);
|
|
ecb->flags &= ~ECB_READY;
|
|
sc->sc_nexus = ecb;
|
|
ncr53c9x_select(sc, ecb);
|
|
break;
|
|
} else {
|
|
NCR_TRACE(("%d:%d busy\n",
|
|
ecb->ccb->ccb_h.target_id,
|
|
ecb->ccb->ccb_h.target_lun));
|
|
}
|
|
}
|
|
}
|
|
|
|
static void
|
|
ncr53c9x_sense(struct ncr53c9x_softc *sc, struct ncr53c9x_ecb *ecb)
|
|
{
|
|
union ccb *ccb = ecb->ccb;
|
|
struct ncr53c9x_linfo *li;
|
|
struct ncr53c9x_tinfo *ti;
|
|
struct scsi_request_sense *ss = (void *)&ecb->cmd.cmd;
|
|
int lun;
|
|
|
|
NCR_LOCK_ASSERT(sc, MA_OWNED);
|
|
|
|
NCR_TRACE(("requesting sense "));
|
|
|
|
lun = ccb->ccb_h.target_lun;
|
|
ti = &sc->sc_tinfo[ccb->ccb_h.target_id];
|
|
|
|
/* Next, setup a REQUEST SENSE command block. */
|
|
memset(ss, 0, sizeof(*ss));
|
|
ss->opcode = REQUEST_SENSE;
|
|
ss->byte2 = ccb->ccb_h.target_lun << SCSI_CMD_LUN_SHIFT;
|
|
ss->length = sizeof(struct scsi_sense_data);
|
|
ecb->clen = sizeof(*ss);
|
|
ecb->daddr = (char *)&ecb->ccb->csio.sense_data;
|
|
ecb->dleft = sizeof(struct scsi_sense_data);
|
|
ecb->flags |= ECB_SENSE;
|
|
ecb->timeout = NCR_SENSE_TIMEOUT;
|
|
ti->senses++;
|
|
li = TINFO_LUN(ti, lun);
|
|
if (li->busy)
|
|
li->busy = 0;
|
|
ncr53c9x_dequeue(sc, ecb);
|
|
li->untagged = ecb; /* Must be executed first to fix C/A. */
|
|
li->busy = 2;
|
|
if (ecb == sc->sc_nexus) {
|
|
ncr53c9x_select(sc, ecb);
|
|
} else {
|
|
TAILQ_INSERT_HEAD(&sc->ready_list, ecb, chain);
|
|
ecb->flags |= ECB_READY;
|
|
if (sc->sc_state == NCR_IDLE)
|
|
ncr53c9x_sched(sc);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* POST PROCESSING OF SCSI_CMD (usually current)
|
|
*/
|
|
static void
|
|
ncr53c9x_done(struct ncr53c9x_softc *sc, struct ncr53c9x_ecb *ecb)
|
|
{
|
|
union ccb *ccb = ecb->ccb;
|
|
struct ncr53c9x_linfo *li;
|
|
struct ncr53c9x_tinfo *ti;
|
|
int lun;
|
|
|
|
NCR_LOCK_ASSERT(sc, MA_OWNED);
|
|
|
|
NCR_TRACE(("[ncr53c9x_done(status:%x)] ", ccb->ccb_h.status));
|
|
|
|
ti = &sc->sc_tinfo[ccb->ccb_h.target_id];
|
|
lun = ccb->ccb_h.target_lun;
|
|
li = TINFO_LUN(ti, lun);
|
|
|
|
callout_stop(&ecb->ch);
|
|
|
|
/*
|
|
* Now, if we've come here with no error code, i.e. we've kept the
|
|
* initial CAM_REQ_CMP, and the status code signals that we should
|
|
* check sense, we'll need to set up a request sense cmd block and
|
|
* push the command back into the ready queue *before* any other
|
|
* commands for this target/lunit, else we lose the sense info.
|
|
* We don't support chk sense conditions for the request sense cmd.
|
|
*/
|
|
if (ccb->ccb_h.status == CAM_REQ_CMP) {
|
|
ccb->csio.scsi_status = ecb->stat;
|
|
if ((ecb->flags & ECB_ABORT) != 0) {
|
|
ccb->ccb_h.status = CAM_CMD_TIMEOUT;
|
|
} else if ((ecb->flags & ECB_SENSE) != 0 &&
|
|
(ecb->stat != SCSI_STATUS_CHECK_COND)) {
|
|
ccb->csio.scsi_status = SCSI_STATUS_CHECK_COND;
|
|
ccb->ccb_h.status = CAM_SCSI_STATUS_ERROR |
|
|
CAM_AUTOSNS_VALID;
|
|
} else if (ecb->stat == SCSI_STATUS_CHECK_COND) {
|
|
if ((ecb->flags & ECB_SENSE) != 0)
|
|
ccb->ccb_h.status = CAM_AUTOSENSE_FAIL;
|
|
else {
|
|
/* First, save the return values. */
|
|
ccb->csio.resid = ecb->dleft;
|
|
if ((ccb->ccb_h.flags & CAM_DIS_AUTOSENSE) ==
|
|
0) {
|
|
ncr53c9x_sense(sc, ecb);
|
|
return;
|
|
}
|
|
ccb->ccb_h.status = CAM_SCSI_STATUS_ERROR;
|
|
}
|
|
} else {
|
|
ccb->csio.resid = ecb->dleft;
|
|
}
|
|
if (ecb->stat == SCSI_STATUS_QUEUE_FULL)
|
|
ccb->ccb_h.status = CAM_SCSI_STATUS_ERROR;
|
|
else if (ecb->stat == SCSI_STATUS_BUSY)
|
|
ccb->ccb_h.status = CAM_SCSI_BUSY;
|
|
}
|
|
|
|
#ifdef NCR53C9X_DEBUG
|
|
if (ncr53c9x_debug & NCR_SHOWTRAC) {
|
|
if (ccb->csio.resid != 0)
|
|
printf("resid=%d ", ccb->csio.resid);
|
|
if ((ccb->ccb_h.status & CAM_AUTOSNS_VALID) != 0)
|
|
printf("sense=0x%02x\n",
|
|
ccb->csio.sense_data.error_code);
|
|
else
|
|
printf("status SCSI=0x%x CAM=0x%x\n",
|
|
ccb->csio.scsi_status, ccb->ccb_h.status);
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* Remove the ECB from whatever queue it's on.
|
|
*/
|
|
ncr53c9x_dequeue(sc, ecb);
|
|
if (ecb == sc->sc_nexus) {
|
|
sc->sc_nexus = NULL;
|
|
if (sc->sc_state != NCR_CLEANING) {
|
|
sc->sc_state = NCR_IDLE;
|
|
ncr53c9x_sched(sc);
|
|
}
|
|
}
|
|
|
|
if (ccb->ccb_h.status == CAM_SEL_TIMEOUT) {
|
|
/* Selection timeout -- discard this LUN if empty. */
|
|
if (li->untagged == NULL && li->used == 0) {
|
|
if (lun < NCR_NLUN)
|
|
ti->lun[lun] = NULL;
|
|
LIST_REMOVE(li, link);
|
|
free(li, M_DEVBUF);
|
|
}
|
|
}
|
|
|
|
ncr53c9x_free_ecb(sc, ecb);
|
|
ti->cmds++;
|
|
xpt_done(ccb);
|
|
}
|
|
|
|
static void
|
|
ncr53c9x_dequeue(struct ncr53c9x_softc *sc, struct ncr53c9x_ecb *ecb)
|
|
{
|
|
struct ncr53c9x_linfo *li;
|
|
struct ncr53c9x_tinfo *ti;
|
|
int64_t lun;
|
|
|
|
NCR_LOCK_ASSERT(sc, MA_OWNED);
|
|
|
|
ti = &sc->sc_tinfo[ecb->ccb->ccb_h.target_id];
|
|
lun = ecb->ccb->ccb_h.target_lun;
|
|
li = TINFO_LUN(ti, lun);
|
|
#ifdef DIAGNOSTIC
|
|
if (li == NULL || li->lun != lun)
|
|
panic("ncr53c9x_dequeue: lun %qx for ecb %p does not exist",
|
|
(long long)lun, ecb);
|
|
#endif
|
|
if (li->untagged == ecb) {
|
|
li->busy = 0;
|
|
li->untagged = NULL;
|
|
}
|
|
if (ecb->tag[0] && li->queued[ecb->tag[1]] != NULL) {
|
|
#ifdef DIAGNOSTIC
|
|
if (li->queued[ecb->tag[1]] != NULL &&
|
|
(li->queued[ecb->tag[1]] != ecb))
|
|
panic("ncr53c9x_dequeue: slot %d for lun %qx has %p "
|
|
"instead of ecb %p\n", ecb->tag[1],
|
|
(long long)lun, li->queued[ecb->tag[1]], ecb);
|
|
#endif
|
|
li->queued[ecb->tag[1]] = NULL;
|
|
li->used--;
|
|
}
|
|
ecb->tag[0] = ecb->tag[1] = 0;
|
|
|
|
if ((ecb->flags & ECB_READY) != 0) {
|
|
ecb->flags &= ~ECB_READY;
|
|
TAILQ_REMOVE(&sc->ready_list, ecb, chain);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* INTERRUPT/PROTOCOL ENGINE
|
|
*/
|
|
|
|
/*
|
|
* Schedule an outgoing message by prioritizing it, and asserting
|
|
* attention on the bus. We can only do this when we are the initiator
|
|
* else there will be an illegal command interrupt.
|
|
*/
|
|
#define ncr53c9x_sched_msgout(m) do { \
|
|
NCR_MSGS(("ncr53c9x_sched_msgout %x %d", m, __LINE__)); \
|
|
NCRCMD(sc, NCRCMD_SETATN); \
|
|
sc->sc_flags |= NCR_ATN; \
|
|
sc->sc_msgpriq |= (m); \
|
|
} while (0)
|
|
|
|
static void
|
|
ncr53c9x_flushfifo(struct ncr53c9x_softc *sc)
|
|
{
|
|
|
|
NCR_LOCK_ASSERT(sc, MA_OWNED);
|
|
|
|
NCR_TRACE(("[flushfifo] "));
|
|
|
|
NCRCMD(sc, NCRCMD_FLUSH);
|
|
|
|
if (sc->sc_phase == COMMAND_PHASE ||
|
|
sc->sc_phase == MESSAGE_OUT_PHASE)
|
|
DELAY(2);
|
|
}
|
|
|
|
static int
|
|
ncr53c9x_rdfifo(struct ncr53c9x_softc *sc, int how)
|
|
{
|
|
u_char *ibuf;
|
|
int i, n;
|
|
|
|
NCR_LOCK_ASSERT(sc, MA_OWNED);
|
|
|
|
switch (how) {
|
|
case NCR_RDFIFO_START:
|
|
ibuf = sc->sc_imess;
|
|
sc->sc_imlen = 0;
|
|
break;
|
|
|
|
case NCR_RDFIFO_CONTINUE:
|
|
ibuf = sc->sc_imess + sc->sc_imlen;
|
|
break;
|
|
|
|
default:
|
|
panic("ncr53c9x_rdfifo: bad flag");
|
|
/* NOTREACHED */
|
|
}
|
|
|
|
/*
|
|
* XXX buffer (sc_imess) size for message
|
|
*/
|
|
|
|
n = NCR_READ_REG(sc, NCR_FFLAG) & NCRFIFO_FF;
|
|
|
|
if (sc->sc_rev == NCR_VARIANT_FAS366) {
|
|
n *= 2;
|
|
|
|
for (i = 0; i < n; i++)
|
|
ibuf[i] = NCR_READ_REG(sc, NCR_FIFO);
|
|
|
|
if (sc->sc_espstat2 & NCRFAS_STAT2_ISHUTTLE) {
|
|
|
|
NCR_WRITE_REG(sc, NCR_FIFO, 0);
|
|
ibuf[i++] = NCR_READ_REG(sc, NCR_FIFO);
|
|
|
|
NCR_READ_REG(sc, NCR_FIFO);
|
|
|
|
ncr53c9x_flushfifo(sc);
|
|
}
|
|
} else {
|
|
for (i = 0; i < n; i++)
|
|
ibuf[i] = NCR_READ_REG(sc, NCR_FIFO);
|
|
}
|
|
|
|
sc->sc_imlen += i;
|
|
|
|
#if 0
|
|
#ifdef NCR53C9X_DEBUG
|
|
NCR_TRACE(("\n[rdfifo %s (%d):",
|
|
(how == NCR_RDFIFO_START) ? "start" : "cont", (int)sc->sc_imlen));
|
|
if (ncr53c9x_debug & NCR_SHOWTRAC) {
|
|
for (i = 0; i < sc->sc_imlen; i++)
|
|
printf(" %02x", sc->sc_imess[i]);
|
|
printf("]\n");
|
|
}
|
|
#endif
|
|
#endif
|
|
return (sc->sc_imlen);
|
|
}
|
|
|
|
static void
|
|
ncr53c9x_wrfifo(struct ncr53c9x_softc *sc, u_char *p, int len)
|
|
{
|
|
int i;
|
|
|
|
NCR_LOCK_ASSERT(sc, MA_OWNED);
|
|
|
|
#ifdef NCR53C9X_DEBUG
|
|
NCR_MSGS(("[wrfifo(%d):", len));
|
|
if (ncr53c9x_debug & NCR_SHOWMSGS) {
|
|
for (i = 0; i < len; i++)
|
|
printf(" %02x", p[i]);
|
|
printf("]\n");
|
|
}
|
|
#endif
|
|
|
|
for (i = 0; i < len; i++) {
|
|
NCR_WRITE_REG(sc, NCR_FIFO, p[i]);
|
|
|
|
if (sc->sc_rev == NCR_VARIANT_FAS366)
|
|
NCR_WRITE_REG(sc, NCR_FIFO, 0);
|
|
}
|
|
}
|
|
|
|
static int
|
|
ncr53c9x_reselect(struct ncr53c9x_softc *sc, int message, int tagtype,
|
|
int tagid)
|
|
{
|
|
struct ncr53c9x_ecb *ecb = NULL;
|
|
struct ncr53c9x_linfo *li;
|
|
struct ncr53c9x_tinfo *ti;
|
|
u_char lun, selid, target;
|
|
|
|
NCR_LOCK_ASSERT(sc, MA_OWNED);
|
|
|
|
if (sc->sc_rev == NCR_VARIANT_FAS366) {
|
|
target = sc->sc_selid;
|
|
} else {
|
|
/*
|
|
* The SCSI chip made a snapshot of the data bus
|
|
* while the reselection was being negotiated.
|
|
* This enables us to determine which target did
|
|
* the reselect.
|
|
*/
|
|
selid = sc->sc_selid & ~(1 << sc->sc_id);
|
|
if (selid & (selid - 1)) {
|
|
device_printf(sc->sc_dev, "reselect with invalid "
|
|
"selid %02x; sending DEVICE RESET\n", selid);
|
|
goto reset;
|
|
}
|
|
|
|
target = ffs(selid) - 1;
|
|
}
|
|
lun = message & 0x07;
|
|
|
|
/*
|
|
* Search wait queue for disconnected command.
|
|
* The list should be short, so I haven't bothered with
|
|
* any more sophisticated structures than a simple
|
|
* singly linked list.
|
|
*/
|
|
ti = &sc->sc_tinfo[target];
|
|
li = TINFO_LUN(ti, lun);
|
|
|
|
/*
|
|
* We can get as far as the LUN with the IDENTIFY
|
|
* message. Check to see if we're running an
|
|
* untagged command. Otherwise ack the IDENTIFY
|
|
* and wait for a tag message.
|
|
*/
|
|
if (li != NULL) {
|
|
if (li->untagged != NULL && li->busy)
|
|
ecb = li->untagged;
|
|
else if (tagtype != MSG_SIMPLE_Q_TAG) {
|
|
/* Wait for tag to come by. */
|
|
sc->sc_state = NCR_IDENTIFIED;
|
|
return (0);
|
|
} else if (tagtype)
|
|
ecb = li->queued[tagid];
|
|
}
|
|
if (ecb == NULL) {
|
|
device_printf(sc->sc_dev, "reselect from target %d lun %d "
|
|
"tag %x:%x with no nexus; sending ABORT\n",
|
|
target, lun, tagtype, tagid);
|
|
goto abort;
|
|
}
|
|
|
|
/* Make this nexus active again. */
|
|
sc->sc_state = NCR_CONNECTED;
|
|
sc->sc_nexus = ecb;
|
|
ncr53c9x_setsync(sc, ti);
|
|
|
|
if (ecb->flags & ECB_RESET)
|
|
ncr53c9x_sched_msgout(SEND_DEV_RESET);
|
|
else if (ecb->flags & ECB_ABORT)
|
|
ncr53c9x_sched_msgout(SEND_ABORT);
|
|
|
|
/* Do an implicit RESTORE POINTERS. */
|
|
sc->sc_dp = ecb->daddr;
|
|
sc->sc_dleft = ecb->dleft;
|
|
|
|
return (0);
|
|
|
|
reset:
|
|
ncr53c9x_sched_msgout(SEND_DEV_RESET);
|
|
return (1);
|
|
|
|
abort:
|
|
ncr53c9x_sched_msgout(SEND_ABORT);
|
|
return (1);
|
|
}
|
|
|
|
/* From NetBSD; these should go into CAM at some point. */
|
|
#define MSG_ISEXTENDED(m) ((m) == MSG_EXTENDED)
|
|
#define MSG_IS1BYTE(m) \
|
|
((!MSG_ISEXTENDED(m) && (m) < 0x20) || MSG_ISIDENTIFY(m))
|
|
#define MSG_IS2BYTE(m) (((m) & 0xf0) == 0x20)
|
|
|
|
static inline int
|
|
__verify_msg_format(u_char *p, int len)
|
|
{
|
|
|
|
if (len == 1 && MSG_IS1BYTE(p[0]))
|
|
return (1);
|
|
if (len == 2 && MSG_IS2BYTE(p[0]))
|
|
return (1);
|
|
if (len >= 3 && MSG_ISEXTENDED(p[0]) &&
|
|
len == p[1] + 2)
|
|
return (1);
|
|
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Get an incoming message as initiator.
|
|
*
|
|
* The SCSI bus must already be in MESSAGE_IN_PHASE and there is a
|
|
* byte in the FIFO.
|
|
*/
|
|
static void
|
|
ncr53c9x_msgin(struct ncr53c9x_softc *sc)
|
|
{
|
|
struct ncr53c9x_ecb *ecb;
|
|
struct ncr53c9x_linfo *li;
|
|
struct ncr53c9x_tinfo *ti;
|
|
u_char *pb;
|
|
int lun, plen;
|
|
|
|
NCR_LOCK_ASSERT(sc, MA_OWNED);
|
|
|
|
NCR_TRACE(("[ncr53c9x_msgin(curmsglen:%ld)] ", (long)sc->sc_imlen));
|
|
|
|
if (sc->sc_imlen == 0) {
|
|
device_printf(sc->sc_dev, "msgin: no msg byte available\n");
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Prepare for a new message. A message should (according
|
|
* to the SCSI standard) be transmitted in one single
|
|
* MESSAGE_IN_PHASE. If we have been in some other phase,
|
|
* then this is a new message.
|
|
*/
|
|
if (sc->sc_prevphase != MESSAGE_IN_PHASE &&
|
|
sc->sc_state != NCR_RESELECTED) {
|
|
device_printf(sc->sc_dev, "phase change, dropping message, "
|
|
"prev %d, state %d\n", sc->sc_prevphase, sc->sc_state);
|
|
sc->sc_flags &= ~NCR_DROP_MSGI;
|
|
sc->sc_imlen = 0;
|
|
}
|
|
|
|
/*
|
|
* If we're going to reject the message, don't bother storing
|
|
* the incoming bytes. But still, we need to ACK them.
|
|
*/
|
|
if ((sc->sc_flags & NCR_DROP_MSGI) != 0) {
|
|
NCRCMD(sc, NCRCMD_MSGOK);
|
|
device_printf(sc->sc_dev, "<dropping msg byte %x>",
|
|
sc->sc_imess[sc->sc_imlen]);
|
|
return;
|
|
}
|
|
|
|
if (sc->sc_imlen >= NCR_MAX_MSG_LEN) {
|
|
ncr53c9x_sched_msgout(SEND_REJECT);
|
|
sc->sc_flags |= NCR_DROP_MSGI;
|
|
} else {
|
|
switch (sc->sc_state) {
|
|
/*
|
|
* if received message is the first of reselection
|
|
* then first byte is selid, and then message
|
|
*/
|
|
case NCR_RESELECTED:
|
|
pb = sc->sc_imess + 1;
|
|
plen = sc->sc_imlen - 1;
|
|
break;
|
|
|
|
default:
|
|
pb = sc->sc_imess;
|
|
plen = sc->sc_imlen;
|
|
}
|
|
|
|
if (__verify_msg_format(pb, plen))
|
|
goto gotit;
|
|
}
|
|
|
|
/* Acknowledge what we have so far. */
|
|
NCRCMD(sc, NCRCMD_MSGOK);
|
|
return;
|
|
|
|
gotit:
|
|
NCR_MSGS(("gotmsg(%x) state %d", sc->sc_imess[0], sc->sc_state));
|
|
/*
|
|
* We got a complete message, flush the imess.
|
|
* XXX nobody uses imlen below.
|
|
*/
|
|
sc->sc_imlen = 0;
|
|
/*
|
|
* Now we should have a complete message (1 byte, 2 byte
|
|
* and moderately long extended messages). We only handle
|
|
* extended messages which total length is shorter than
|
|
* NCR_MAX_MSG_LEN. Longer messages will be amputated.
|
|
*/
|
|
switch (sc->sc_state) {
|
|
case NCR_CONNECTED:
|
|
ecb = sc->sc_nexus;
|
|
ti = &sc->sc_tinfo[ecb->ccb->ccb_h.target_id];
|
|
|
|
switch (sc->sc_imess[0]) {
|
|
case MSG_CMDCOMPLETE:
|
|
NCR_MSGS(("cmdcomplete "));
|
|
if (sc->sc_dleft < 0) {
|
|
xpt_print_path(ecb->ccb->ccb_h.path);
|
|
printf("got %ld extra bytes\n",
|
|
-(long)sc->sc_dleft);
|
|
sc->sc_dleft = 0;
|
|
}
|
|
ecb->dleft = (ecb->flags & ECB_TENTATIVE_DONE) ?
|
|
0 : sc->sc_dleft;
|
|
if ((ecb->flags & ECB_SENSE) == 0)
|
|
ecb->ccb->csio.resid = ecb->dleft;
|
|
sc->sc_state = NCR_CMDCOMPLETE;
|
|
break;
|
|
|
|
case MSG_MESSAGE_REJECT:
|
|
NCR_MSGS(("msg reject (msgout=%x) ", sc->sc_msgout));
|
|
switch (sc->sc_msgout) {
|
|
case SEND_TAG:
|
|
/*
|
|
* Target does not like tagged queuing.
|
|
* - Flush the command queue
|
|
* - Disable tagged queuing for the target
|
|
* - Dequeue ecb from the queued array.
|
|
*/
|
|
device_printf(sc->sc_dev, "tagged queuing "
|
|
"rejected: target %d\n",
|
|
ecb->ccb->ccb_h.target_id);
|
|
|
|
NCR_MSGS(("(rejected sent tag)"));
|
|
NCRCMD(sc, NCRCMD_FLUSH);
|
|
DELAY(1);
|
|
ti->flags &= ~T_TAG;
|
|
lun = ecb->ccb->ccb_h.target_lun;
|
|
li = TINFO_LUN(ti, lun);
|
|
if (ecb->tag[0] &&
|
|
li->queued[ecb->tag[1]] != NULL) {
|
|
li->queued[ecb->tag[1]] = NULL;
|
|
li->used--;
|
|
}
|
|
ecb->tag[0] = ecb->tag[1] = 0;
|
|
li->untagged = ecb;
|
|
li->busy = 1;
|
|
break;
|
|
|
|
case SEND_SDTR:
|
|
device_printf(sc->sc_dev, "sync transfer "
|
|
"rejected: target %d\n",
|
|
ecb->ccb->ccb_h.target_id);
|
|
|
|
ti->flags &= ~T_SDTRSENT;
|
|
ti->curr.period = ti->goal.period = 0;
|
|
ti->curr.offset = ti->goal.offset = 0;
|
|
ncr53c9x_setsync(sc, ti);
|
|
break;
|
|
|
|
case SEND_WDTR:
|
|
device_printf(sc->sc_dev, "wide transfer "
|
|
"rejected: target %d\n",
|
|
ecb->ccb->ccb_h.target_id);
|
|
|
|
ti->flags &= ~T_WDTRSENT;
|
|
ti->curr.width = ti->goal.width =
|
|
MSG_EXT_WDTR_BUS_8_BIT;
|
|
ncr53c9x_setsync(sc, ti);
|
|
break;
|
|
|
|
case SEND_INIT_DET_ERR:
|
|
goto abort;
|
|
}
|
|
break;
|
|
|
|
case MSG_NOOP:
|
|
NCR_MSGS(("noop "));
|
|
break;
|
|
|
|
case MSG_HEAD_OF_Q_TAG:
|
|
case MSG_SIMPLE_Q_TAG:
|
|
case MSG_ORDERED_Q_TAG:
|
|
NCR_MSGS(("TAG %x:%x",
|
|
sc->sc_imess[0], sc->sc_imess[1]));
|
|
break;
|
|
|
|
case MSG_DISCONNECT:
|
|
NCR_MSGS(("disconnect "));
|
|
ti->dconns++;
|
|
sc->sc_state = NCR_DISCONNECT;
|
|
|
|
/*
|
|
* Mark the fact that all bytes have moved. The
|
|
* target may not bother to do a SAVE POINTERS
|
|
* at this stage. This flag will set the residual
|
|
* count to zero on MSG COMPLETE.
|
|
*/
|
|
if (sc->sc_dleft == 0)
|
|
ecb->flags |= ECB_TENTATIVE_DONE;
|
|
break;
|
|
|
|
case MSG_SAVEDATAPOINTER:
|
|
NCR_MSGS(("save datapointer "));
|
|
ecb->daddr = sc->sc_dp;
|
|
ecb->dleft = sc->sc_dleft;
|
|
break;
|
|
|
|
case MSG_RESTOREPOINTERS:
|
|
NCR_MSGS(("restore datapointer "));
|
|
sc->sc_dp = ecb->daddr;
|
|
sc->sc_dleft = ecb->dleft;
|
|
break;
|
|
|
|
case MSG_EXTENDED:
|
|
NCR_MSGS(("extended(%x) ", sc->sc_imess[2]));
|
|
switch (sc->sc_imess[2]) {
|
|
case MSG_EXT_SDTR:
|
|
NCR_MSGS(("SDTR period %d, offset %d ",
|
|
sc->sc_imess[3], sc->sc_imess[4]));
|
|
if (sc->sc_imess[1] != 3)
|
|
goto reject;
|
|
ti->curr.period = sc->sc_imess[3];
|
|
ti->curr.offset = sc->sc_imess[4];
|
|
if (sc->sc_minsync == 0 ||
|
|
ti->curr.offset == 0 ||
|
|
ti->curr.period > 124) {
|
|
#if 0
|
|
#ifdef NCR53C9X_DEBUG
|
|
xpt_print_path(ecb->ccb->ccb_h.path);
|
|
printf("async mode\n");
|
|
#endif
|
|
#endif
|
|
if ((ti->flags & T_SDTRSENT) == 0) {
|
|
/*
|
|
* target initiated negotiation
|
|
*/
|
|
ti->curr.offset = 0;
|
|
ncr53c9x_sched_msgout(
|
|
SEND_SDTR);
|
|
}
|
|
} else {
|
|
ti->curr.period =
|
|
ncr53c9x_cpb2stp(sc,
|
|
ncr53c9x_stp2cpb(sc,
|
|
ti->curr.period));
|
|
if ((ti->flags & T_SDTRSENT) == 0) {
|
|
/*
|
|
* target initiated negotiation
|
|
*/
|
|
if (ti->curr.period <
|
|
sc->sc_minsync)
|
|
ti->curr.period =
|
|
sc->sc_minsync;
|
|
if (ti->curr.offset >
|
|
sc->sc_maxoffset)
|
|
ti->curr.offset =
|
|
sc->sc_maxoffset;
|
|
ncr53c9x_sched_msgout(
|
|
SEND_SDTR);
|
|
}
|
|
}
|
|
ti->flags &= ~T_SDTRSENT;
|
|
ti->goal.period = ti->curr.period;
|
|
ti->goal.offset = ti->curr.offset;
|
|
ncr53c9x_setsync(sc, ti);
|
|
break;
|
|
|
|
case MSG_EXT_WDTR:
|
|
NCR_MSGS(("wide mode %d ", sc->sc_imess[3]));
|
|
ti->curr.width = sc->sc_imess[3];
|
|
if (!(ti->flags & T_WDTRSENT))
|
|
/*
|
|
* target initiated negotiation
|
|
*/
|
|
ncr53c9x_sched_msgout(SEND_WDTR);
|
|
ti->flags &= ~T_WDTRSENT;
|
|
ti->goal.width = ti->curr.width;
|
|
ncr53c9x_setsync(sc, ti);
|
|
break;
|
|
|
|
default:
|
|
xpt_print_path(ecb->ccb->ccb_h.path);
|
|
printf("unrecognized MESSAGE EXTENDED;"
|
|
" sending REJECT\n");
|
|
goto reject;
|
|
}
|
|
break;
|
|
|
|
default:
|
|
NCR_MSGS(("ident "));
|
|
xpt_print_path(ecb->ccb->ccb_h.path);
|
|
printf("unrecognized MESSAGE; sending REJECT\n");
|
|
/* FALLTHROUGH */
|
|
reject:
|
|
ncr53c9x_sched_msgout(SEND_REJECT);
|
|
break;
|
|
}
|
|
break;
|
|
|
|
case NCR_IDENTIFIED:
|
|
/*
|
|
* IDENTIFY message was received and queue tag is expected
|
|
* now.
|
|
*/
|
|
if ((sc->sc_imess[0] != MSG_SIMPLE_Q_TAG) ||
|
|
(sc->sc_msgify == 0)) {
|
|
device_printf(sc->sc_dev, "TAG reselect without "
|
|
"IDENTIFY; MSG %x; sending DEVICE RESET\n",
|
|
sc->sc_imess[0]);
|
|
goto reset;
|
|
}
|
|
(void) ncr53c9x_reselect(sc, sc->sc_msgify,
|
|
sc->sc_imess[0], sc->sc_imess[1]);
|
|
break;
|
|
|
|
case NCR_RESELECTED:
|
|
if (MSG_ISIDENTIFY(sc->sc_imess[1])) {
|
|
sc->sc_msgify = sc->sc_imess[1];
|
|
} else {
|
|
device_printf(sc->sc_dev, "reselect without IDENTIFY;"
|
|
" MSG %x; sending DEVICE RESET\n", sc->sc_imess[1]);
|
|
goto reset;
|
|
}
|
|
(void) ncr53c9x_reselect(sc, sc->sc_msgify, 0, 0);
|
|
break;
|
|
|
|
default:
|
|
device_printf(sc->sc_dev, "unexpected MESSAGE IN; "
|
|
"sending DEVICE RESET\n");
|
|
/* FALLTHROUGH */
|
|
reset:
|
|
ncr53c9x_sched_msgout(SEND_DEV_RESET);
|
|
break;
|
|
|
|
abort:
|
|
ncr53c9x_sched_msgout(SEND_ABORT);
|
|
}
|
|
|
|
/* If we have more messages to send set ATN. */
|
|
if (sc->sc_msgpriq) {
|
|
NCRCMD(sc, NCRCMD_SETATN);
|
|
sc->sc_flags |= NCR_ATN;
|
|
}
|
|
|
|
/* Acknowledge last message byte. */
|
|
NCRCMD(sc, NCRCMD_MSGOK);
|
|
|
|
/* Done, reset message pointer. */
|
|
sc->sc_flags &= ~NCR_DROP_MSGI;
|
|
sc->sc_imlen = 0;
|
|
}
|
|
|
|
/*
|
|
* Send the highest priority, scheduled message.
|
|
*/
|
|
static void
|
|
ncr53c9x_msgout(struct ncr53c9x_softc *sc)
|
|
{
|
|
struct ncr53c9x_tinfo *ti;
|
|
struct ncr53c9x_ecb *ecb;
|
|
size_t size;
|
|
#ifdef NCR53C9X_DEBUG
|
|
int i;
|
|
#endif
|
|
|
|
NCR_LOCK_ASSERT(sc, MA_OWNED);
|
|
|
|
NCR_TRACE(("[ncr53c9x_msgout(priq:%x, prevphase:%x)]",
|
|
sc->sc_msgpriq, sc->sc_prevphase));
|
|
|
|
/*
|
|
* XXX - the NCR_ATN flag is not in sync with the actual ATN
|
|
* condition on the SCSI bus. The 53c9x chip
|
|
* automatically turns off ATN before sending the
|
|
* message byte. (See also the comment below in the
|
|
* default case when picking out a message to send.)
|
|
*/
|
|
if (sc->sc_flags & NCR_ATN) {
|
|
if (sc->sc_prevphase != MESSAGE_OUT_PHASE) {
|
|
new:
|
|
NCRCMD(sc, NCRCMD_FLUSH);
|
|
/* DELAY(1); */
|
|
sc->sc_msgoutq = 0;
|
|
sc->sc_omlen = 0;
|
|
}
|
|
} else {
|
|
if (sc->sc_prevphase == MESSAGE_OUT_PHASE) {
|
|
ncr53c9x_sched_msgout(sc->sc_msgoutq);
|
|
goto new;
|
|
} else {
|
|
device_printf(sc->sc_dev, "at line %d: unexpected "
|
|
"MESSAGE OUT phase\n", __LINE__);
|
|
}
|
|
}
|
|
|
|
if (sc->sc_omlen == 0) {
|
|
/* Pick up highest priority message. */
|
|
sc->sc_msgout = sc->sc_msgpriq & -sc->sc_msgpriq;
|
|
sc->sc_msgoutq |= sc->sc_msgout;
|
|
sc->sc_msgpriq &= ~sc->sc_msgout;
|
|
sc->sc_omlen = 1; /* "Default" message len */
|
|
switch (sc->sc_msgout) {
|
|
case SEND_SDTR:
|
|
ecb = sc->sc_nexus;
|
|
ti = &sc->sc_tinfo[ecb->ccb->ccb_h.target_id];
|
|
sc->sc_omess[0] = MSG_EXTENDED;
|
|
sc->sc_omess[1] = MSG_EXT_SDTR_LEN;
|
|
sc->sc_omess[2] = MSG_EXT_SDTR;
|
|
sc->sc_omess[3] = ti->goal.period;
|
|
sc->sc_omess[4] = ti->goal.offset;
|
|
sc->sc_omlen = 5;
|
|
break;
|
|
|
|
case SEND_WDTR:
|
|
ecb = sc->sc_nexus;
|
|
ti = &sc->sc_tinfo[ecb->ccb->ccb_h.target_id];
|
|
sc->sc_omess[0] = MSG_EXTENDED;
|
|
sc->sc_omess[1] = MSG_EXT_WDTR_LEN;
|
|
sc->sc_omess[2] = MSG_EXT_WDTR;
|
|
sc->sc_omess[3] = ti->goal.width;
|
|
sc->sc_omlen = 4;
|
|
break;
|
|
|
|
case SEND_IDENTIFY:
|
|
if (sc->sc_state != NCR_CONNECTED) {
|
|
device_printf(sc->sc_dev, "at line %d: no "
|
|
"nexus\n", __LINE__);
|
|
}
|
|
ecb = sc->sc_nexus;
|
|
sc->sc_omess[0] =
|
|
MSG_IDENTIFY(ecb->ccb->ccb_h.target_lun, 0);
|
|
break;
|
|
|
|
case SEND_TAG:
|
|
if (sc->sc_state != NCR_CONNECTED) {
|
|
device_printf(sc->sc_dev, "at line %d: no "
|
|
"nexus\n", __LINE__);
|
|
}
|
|
ecb = sc->sc_nexus;
|
|
sc->sc_omess[0] = ecb->tag[0];
|
|
sc->sc_omess[1] = ecb->tag[1];
|
|
sc->sc_omlen = 2;
|
|
break;
|
|
|
|
case SEND_DEV_RESET:
|
|
sc->sc_flags |= NCR_ABORTING;
|
|
sc->sc_omess[0] = MSG_BUS_DEV_RESET;
|
|
ecb = sc->sc_nexus;
|
|
ti = &sc->sc_tinfo[ecb->ccb->ccb_h.target_id];
|
|
ti->curr.period = 0;
|
|
ti->curr.offset = 0;
|
|
ti->curr.width = MSG_EXT_WDTR_BUS_8_BIT;
|
|
break;
|
|
|
|
case SEND_PARITY_ERROR:
|
|
sc->sc_omess[0] = MSG_PARITY_ERROR;
|
|
break;
|
|
|
|
case SEND_ABORT:
|
|
sc->sc_flags |= NCR_ABORTING;
|
|
sc->sc_omess[0] = MSG_ABORT;
|
|
break;
|
|
|
|
case SEND_INIT_DET_ERR:
|
|
sc->sc_omess[0] = MSG_INITIATOR_DET_ERR;
|
|
break;
|
|
|
|
case SEND_REJECT:
|
|
sc->sc_omess[0] = MSG_MESSAGE_REJECT;
|
|
break;
|
|
|
|
default:
|
|
/*
|
|
* We normally do not get here, since the chip
|
|
* automatically turns off ATN before the last
|
|
* byte of a message is sent to the target.
|
|
* However, if the target rejects our (multi-byte)
|
|
* message early by switching to MSG IN phase
|
|
* ATN remains on, so the target may return to
|
|
* MSG OUT phase. If there are no scheduled messages
|
|
* left we send a NO-OP.
|
|
*
|
|
* XXX - Note that this leaves no useful purpose for
|
|
* the NCR_ATN flag.
|
|
*/
|
|
sc->sc_flags &= ~NCR_ATN;
|
|
sc->sc_omess[0] = MSG_NOOP;
|
|
}
|
|
sc->sc_omp = sc->sc_omess;
|
|
}
|
|
|
|
#ifdef NCR53C9X_DEBUG
|
|
if (ncr53c9x_debug & NCR_SHOWMSGS) {
|
|
NCR_MSGS(("<msgout:"));
|
|
for (i = 0; i < sc->sc_omlen; i++)
|
|
NCR_MSGS((" %02x", sc->sc_omess[i]));
|
|
NCR_MSGS(("> "));
|
|
}
|
|
#endif
|
|
if (sc->sc_rev == NCR_VARIANT_FAS366) {
|
|
/*
|
|
* XXX FIFO size
|
|
*/
|
|
ncr53c9x_flushfifo(sc);
|
|
ncr53c9x_wrfifo(sc, sc->sc_omp, sc->sc_omlen);
|
|
NCRCMD(sc, NCRCMD_TRANS);
|
|
} else {
|
|
/* (Re)send the message. */
|
|
size = ulmin(sc->sc_omlen, sc->sc_maxxfer);
|
|
NCRDMA_SETUP(sc, &sc->sc_omp, &sc->sc_omlen, 0, &size);
|
|
/* Program the SCSI counter. */
|
|
NCR_SET_COUNT(sc, size);
|
|
|
|
/* Load the count in and start the message-out transfer. */
|
|
NCRCMD(sc, NCRCMD_NOP | NCRCMD_DMA);
|
|
NCRCMD(sc, NCRCMD_TRANS | NCRCMD_DMA);
|
|
NCRDMA_GO(sc);
|
|
}
|
|
}
|
|
|
|
void
|
|
ncr53c9x_intr(void *arg)
|
|
{
|
|
struct ncr53c9x_softc *sc = arg;
|
|
|
|
if (!NCRDMA_ISINTR(sc))
|
|
return;
|
|
|
|
NCR_LOCK(sc);
|
|
|
|
ncr53c9x_intr1(sc);
|
|
|
|
NCR_UNLOCK(sc);
|
|
}
|
|
|
|
/*
|
|
* This is the most critical part of the driver, and has to know
|
|
* how to deal with *all* error conditions and phases from the SCSI
|
|
* bus. If there are no errors and the DMA was active, then call the
|
|
* DMA pseudo-interrupt handler. If this returns 1, then that was it
|
|
* and we can return from here without further processing.
|
|
*
|
|
* Most of this needs verifying.
|
|
*/
|
|
static void
|
|
ncr53c9x_intr1(struct ncr53c9x_softc *sc)
|
|
{
|
|
struct ncr53c9x_ecb *ecb;
|
|
struct ncr53c9x_linfo *li;
|
|
struct ncr53c9x_tinfo *ti;
|
|
struct timeval cur, wait;
|
|
size_t size;
|
|
int i, nfifo;
|
|
u_char msg;
|
|
|
|
NCR_LOCK_ASSERT(sc, MA_OWNED);
|
|
|
|
NCR_INTS(("[ncr53c9x_intr: state %d]", sc->sc_state));
|
|
|
|
again:
|
|
/* and what do the registers say... */
|
|
ncr53c9x_readregs(sc);
|
|
|
|
/*
|
|
* At the moment, only a SCSI Bus Reset or Illegal
|
|
* Command are classed as errors. A disconnect is a
|
|
* valid condition, and we let the code check is the
|
|
* "NCR_BUSFREE_OK" flag was set before declaring it
|
|
* and error.
|
|
*
|
|
* Also, the status register tells us about "Gross
|
|
* Errors" and "Parity errors". Only the Gross Error
|
|
* is really bad, and the parity errors are dealt
|
|
* with later.
|
|
*
|
|
* TODO
|
|
* If there are too many parity error, go to slow
|
|
* cable mode?
|
|
*/
|
|
|
|
if ((sc->sc_espintr & NCRINTR_SBR) != 0) {
|
|
if ((NCR_READ_REG(sc, NCR_FFLAG) & NCRFIFO_FF) != 0) {
|
|
NCRCMD(sc, NCRCMD_FLUSH);
|
|
DELAY(1);
|
|
}
|
|
if (sc->sc_state != NCR_SBR) {
|
|
device_printf(sc->sc_dev, "SCSI bus reset\n");
|
|
ncr53c9x_init(sc, 0); /* Restart everything. */
|
|
return;
|
|
}
|
|
#if 0
|
|
/*XXX*/ device_printf(sc->sc_dev, "<expected bus reset: "
|
|
"[intr %x, stat %x, step %d]>\n",
|
|
sc->sc_espintr, sc->sc_espstat, sc->sc_espstep);
|
|
#endif
|
|
if (sc->sc_nexus != NULL)
|
|
panic("%s: nexus in reset state",
|
|
device_get_nameunit(sc->sc_dev));
|
|
goto sched;
|
|
}
|
|
|
|
ecb = sc->sc_nexus;
|
|
|
|
#define NCRINTR_ERR (NCRINTR_SBR | NCRINTR_ILL)
|
|
if (sc->sc_espintr & NCRINTR_ERR ||
|
|
sc->sc_espstat & NCRSTAT_GE) {
|
|
if ((sc->sc_espstat & NCRSTAT_GE) != 0) {
|
|
/* Gross Error; no target? */
|
|
if (NCR_READ_REG(sc, NCR_FFLAG) & NCRFIFO_FF) {
|
|
NCRCMD(sc, NCRCMD_FLUSH);
|
|
DELAY(1);
|
|
}
|
|
if (sc->sc_state == NCR_CONNECTED ||
|
|
sc->sc_state == NCR_SELECTING) {
|
|
ecb->ccb->ccb_h.status = CAM_SEL_TIMEOUT;
|
|
ncr53c9x_done(sc, ecb);
|
|
}
|
|
return;
|
|
}
|
|
|
|
if ((sc->sc_espintr & NCRINTR_ILL) != 0) {
|
|
if ((sc->sc_flags & NCR_EXPECT_ILLCMD) != 0) {
|
|
/*
|
|
* Eat away "Illegal command" interrupt
|
|
* on a ESP100 caused by a re-selection
|
|
* while we were trying to select
|
|
* another target.
|
|
*/
|
|
#ifdef DEBUG
|
|
device_printf(sc->sc_dev, "ESP100 work-around "
|
|
"activated\n");
|
|
#endif
|
|
sc->sc_flags &= ~NCR_EXPECT_ILLCMD;
|
|
return;
|
|
}
|
|
/* Illegal command, out of sync? */
|
|
device_printf(sc->sc_dev, "illegal command: 0x%x "
|
|
"(state %d, phase %x, prevphase %x)\n",
|
|
sc->sc_lastcmd,
|
|
sc->sc_state, sc->sc_phase, sc->sc_prevphase);
|
|
if (NCR_READ_REG(sc, NCR_FFLAG) & NCRFIFO_FF) {
|
|
NCRCMD(sc, NCRCMD_FLUSH);
|
|
DELAY(1);
|
|
}
|
|
goto reset;
|
|
}
|
|
}
|
|
sc->sc_flags &= ~NCR_EXPECT_ILLCMD;
|
|
|
|
/*
|
|
* Call if DMA is active.
|
|
*
|
|
* If DMA_INTR returns true, then maybe go 'round the loop
|
|
* again in case there is no more DMA queued, but a phase
|
|
* change is expected.
|
|
*/
|
|
if (NCRDMA_ISACTIVE(sc)) {
|
|
if (NCRDMA_INTR(sc) == -1) {
|
|
device_printf(sc->sc_dev, "DMA error; resetting\n");
|
|
goto reset;
|
|
}
|
|
/* If DMA active here, then go back to work... */
|
|
if (NCRDMA_ISACTIVE(sc))
|
|
return;
|
|
|
|
if ((sc->sc_espstat & NCRSTAT_TC) == 0) {
|
|
/*
|
|
* DMA not completed. If we can not find a
|
|
* acceptable explanation, print a diagnostic.
|
|
*/
|
|
if (sc->sc_state == NCR_SELECTING)
|
|
/*
|
|
* This can happen if we are reselected
|
|
* while using DMA to select a target.
|
|
*/
|
|
/*void*/;
|
|
else if (sc->sc_prevphase == MESSAGE_OUT_PHASE) {
|
|
/*
|
|
* Our (multi-byte) message (eg SDTR) was
|
|
* interrupted by the target to send
|
|
* a MSG REJECT.
|
|
* Print diagnostic if current phase
|
|
* is not MESSAGE IN.
|
|
*/
|
|
if (sc->sc_phase != MESSAGE_IN_PHASE)
|
|
device_printf(sc->sc_dev,"!TC on MSGOUT"
|
|
" [intr %x, stat %x, step %d]"
|
|
" prevphase %x, resid %lx\n",
|
|
sc->sc_espintr,
|
|
sc->sc_espstat,
|
|
sc->sc_espstep,
|
|
sc->sc_prevphase,
|
|
(u_long)sc->sc_omlen);
|
|
} else if (sc->sc_dleft == 0) {
|
|
/*
|
|
* The DMA operation was started for
|
|
* a DATA transfer. Print a diagnostic
|
|
* if the DMA counter and TC bit
|
|
* appear to be out of sync.
|
|
*
|
|
* XXX This is fatal and usually means that
|
|
* the DMA engine is hopelessly out of
|
|
* sync with reality. A disk is likely
|
|
* getting spammed at this point.
|
|
*/
|
|
device_printf(sc->sc_dev, "!TC on DATA XFER"
|
|
" [intr %x, stat %x, step %d]"
|
|
" prevphase %x, resid %x\n",
|
|
sc->sc_espintr,
|
|
sc->sc_espstat,
|
|
sc->sc_espstep,
|
|
sc->sc_prevphase,
|
|
ecb ? ecb->dleft : -1);
|
|
goto reset;
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Check for less serious errors.
|
|
*/
|
|
if ((sc->sc_espstat & NCRSTAT_PE) != 0) {
|
|
device_printf(sc->sc_dev, "SCSI bus parity error\n");
|
|
if (sc->sc_prevphase == MESSAGE_IN_PHASE)
|
|
ncr53c9x_sched_msgout(SEND_PARITY_ERROR);
|
|
else
|
|
ncr53c9x_sched_msgout(SEND_INIT_DET_ERR);
|
|
}
|
|
|
|
if ((sc->sc_espintr & NCRINTR_DIS) != 0) {
|
|
sc->sc_msgify = 0;
|
|
NCR_INTS(("<DISC [intr %x, stat %x, step %d]>",
|
|
sc->sc_espintr,sc->sc_espstat,sc->sc_espstep));
|
|
if (NCR_READ_REG(sc, NCR_FFLAG) & NCRFIFO_FF) {
|
|
NCRCMD(sc, NCRCMD_FLUSH);
|
|
/* DELAY(1); */
|
|
}
|
|
/*
|
|
* This command must (apparently) be issued within
|
|
* 250mS of a disconnect. So here you are...
|
|
*/
|
|
NCRCMD(sc, NCRCMD_ENSEL);
|
|
|
|
switch (sc->sc_state) {
|
|
case NCR_RESELECTED:
|
|
goto sched;
|
|
|
|
case NCR_SELECTING:
|
|
ecb->ccb->ccb_h.status = CAM_SEL_TIMEOUT;
|
|
|
|
/* Selection timeout -- discard all LUNs if empty. */
|
|
ti = &sc->sc_tinfo[ecb->ccb->ccb_h.target_id];
|
|
li = LIST_FIRST(&ti->luns);
|
|
while (li != NULL) {
|
|
if (li->untagged == NULL && li->used == 0) {
|
|
if (li->lun < NCR_NLUN)
|
|
ti->lun[li->lun] = NULL;
|
|
LIST_REMOVE(li, link);
|
|
free(li, M_DEVBUF);
|
|
/*
|
|
* Restart the search at the beginning.
|
|
*/
|
|
li = LIST_FIRST(&ti->luns);
|
|
continue;
|
|
}
|
|
li = LIST_NEXT(li, link);
|
|
}
|
|
goto finish;
|
|
|
|
case NCR_CONNECTED:
|
|
if (ecb != NULL) {
|
|
ti = &sc->sc_tinfo[ecb->ccb->ccb_h.target_id];
|
|
if ((ti->flags & T_SDTRSENT) != 0) {
|
|
xpt_print_path(ecb->ccb->ccb_h.path);
|
|
printf("sync nego not completed!\n");
|
|
ti->flags &= ~T_SDTRSENT;
|
|
ti->curr.period = ti->goal.period = 0;
|
|
ti->curr.offset = ti->goal.offset = 0;
|
|
ncr53c9x_setsync(sc, ti);
|
|
}
|
|
if ((ti->flags & T_WDTRSENT) != 0) {
|
|
xpt_print_path(ecb->ccb->ccb_h.path);
|
|
printf("wide nego not completed!\n");
|
|
ti->flags &= ~T_WDTRSENT;
|
|
ti->curr.width = ti->goal.width =
|
|
MSG_EXT_WDTR_BUS_8_BIT;
|
|
ncr53c9x_setsync(sc, ti);
|
|
}
|
|
}
|
|
|
|
/* It may be OK to disconnect. */
|
|
if ((sc->sc_flags & NCR_ABORTING) == 0) {
|
|
/*
|
|
* Section 5.1.1 of the SCSI 2 spec
|
|
* suggests issuing a REQUEST SENSE
|
|
* following an unexpected disconnect.
|
|
* Some devices go into a contingent
|
|
* allegiance condition when
|
|
* disconnecting, and this is necessary
|
|
* to clean up their state.
|
|
*/
|
|
device_printf(sc->sc_dev, "unexpected "
|
|
"disconnect [state %d, intr %x, stat %x, "
|
|
"phase(c %x, p %x)]; ", sc->sc_state,
|
|
sc->sc_espintr, sc->sc_espstat,
|
|
sc->sc_phase, sc->sc_prevphase);
|
|
|
|
/*
|
|
* XXX This will cause a chip reset and will
|
|
* prevent us from finding out the real
|
|
* problem with the device. However, it's
|
|
* neccessary until a way can be found to
|
|
* safely cancel the DMA that is in
|
|
* progress.
|
|
*/
|
|
if (1 || (ecb->flags & ECB_SENSE) != 0) {
|
|
printf("resetting\n");
|
|
goto reset;
|
|
}
|
|
printf("sending REQUEST SENSE\n");
|
|
callout_stop(&ecb->ch);
|
|
ncr53c9x_sense(sc, ecb);
|
|
return;
|
|
} else if (ecb != NULL &&
|
|
(ecb->flags & ECB_RESET) != 0) {
|
|
ecb->ccb->ccb_h.status = CAM_REQ_CMP;
|
|
goto finish;
|
|
}
|
|
|
|
ecb->ccb->ccb_h.status = CAM_CMD_TIMEOUT;
|
|
goto finish;
|
|
|
|
case NCR_DISCONNECT:
|
|
sc->sc_nexus = NULL;
|
|
goto sched;
|
|
|
|
case NCR_CMDCOMPLETE:
|
|
ecb->ccb->ccb_h.status = CAM_REQ_CMP;
|
|
goto finish;
|
|
}
|
|
}
|
|
|
|
switch (sc->sc_state) {
|
|
case NCR_SBR:
|
|
device_printf(sc->sc_dev, "waiting for Bus Reset to happen\n");
|
|
return;
|
|
|
|
case NCR_RESELECTED:
|
|
/*
|
|
* We must be continuing a message?
|
|
*/
|
|
device_printf(sc->sc_dev, "unhandled reselect continuation, "
|
|
"state %d, intr %02x\n", sc->sc_state, sc->sc_espintr);
|
|
goto reset;
|
|
break;
|
|
|
|
case NCR_IDENTIFIED:
|
|
ecb = sc->sc_nexus;
|
|
if (sc->sc_phase != MESSAGE_IN_PHASE) {
|
|
i = NCR_READ_REG(sc, NCR_FFLAG) & NCRFIFO_FF;
|
|
/*
|
|
* Things are seriously screwed up.
|
|
* Pull the brakes, i.e. reset.
|
|
*/
|
|
device_printf(sc->sc_dev, "target didn't send tag: %d "
|
|
"bytes in FIFO\n", i);
|
|
/* Drain and display FIFO. */
|
|
while (i-- > 0)
|
|
printf("[%d] ", NCR_READ_REG(sc, NCR_FIFO));
|
|
|
|
goto reset;
|
|
} else
|
|
goto msgin;
|
|
|
|
case NCR_IDLE:
|
|
case NCR_SELECTING:
|
|
ecb = sc->sc_nexus;
|
|
if (sc->sc_espintr & NCRINTR_RESEL) {
|
|
sc->sc_msgpriq = sc->sc_msgout = sc->sc_msgoutq = 0;
|
|
sc->sc_flags = 0;
|
|
/*
|
|
* If we're trying to select a
|
|
* target ourselves, push our command
|
|
* back into the ready list.
|
|
*/
|
|
if (sc->sc_state == NCR_SELECTING) {
|
|
NCR_INTS(("backoff selector "));
|
|
callout_stop(&ecb->ch);
|
|
ncr53c9x_dequeue(sc, ecb);
|
|
TAILQ_INSERT_HEAD(&sc->ready_list, ecb, chain);
|
|
ecb->flags |= ECB_READY;
|
|
ecb = sc->sc_nexus = NULL;
|
|
}
|
|
sc->sc_state = NCR_RESELECTED;
|
|
if (sc->sc_phase != MESSAGE_IN_PHASE) {
|
|
/*
|
|
* Things are seriously screwed up.
|
|
* Pull the brakes, i.e. reset
|
|
*/
|
|
device_printf(sc->sc_dev, "target didn't "
|
|
"identify\n");
|
|
goto reset;
|
|
}
|
|
/*
|
|
* The C90 only inhibits FIFO writes until reselection
|
|
* is complete instead of waiting until the interrupt
|
|
* status register has been read. So, if the reselect
|
|
* happens while we were entering command bytes (for
|
|
* another target) some of those bytes can appear in
|
|
* the FIFO here, after the interrupt is taken.
|
|
*
|
|
* To remedy this situation, pull the Selection ID
|
|
* and Identify message from the FIFO directly, and
|
|
* ignore any extraneous FIFO contents. Also, set
|
|
* a flag that allows one Illegal Command Interrupt
|
|
* to occur which the chip also generates as a result
|
|
* of writing to the FIFO during a reselect.
|
|
*/
|
|
if (sc->sc_rev == NCR_VARIANT_ESP100) {
|
|
nfifo =
|
|
NCR_READ_REG(sc, NCR_FFLAG) & NCRFIFO_FF;
|
|
sc->sc_imess[0] = NCR_READ_REG(sc, NCR_FIFO);
|
|
sc->sc_imess[1] = NCR_READ_REG(sc, NCR_FIFO);
|
|
sc->sc_imlen = 2;
|
|
if (nfifo != 2) {
|
|
/* Flush the rest. */
|
|
NCRCMD(sc, NCRCMD_FLUSH);
|
|
}
|
|
sc->sc_flags |= NCR_EXPECT_ILLCMD;
|
|
if (nfifo > 2)
|
|
nfifo = 2; /* We fixed it... */
|
|
} else
|
|
nfifo = ncr53c9x_rdfifo(sc, NCR_RDFIFO_START);
|
|
|
|
if (nfifo != 2) {
|
|
device_printf(sc->sc_dev, "RESELECT: %d bytes "
|
|
"in FIFO! [intr %x, stat %x, step %d, "
|
|
"prevphase %x]\n",
|
|
nfifo,
|
|
sc->sc_espintr,
|
|
sc->sc_espstat,
|
|
sc->sc_espstep,
|
|
sc->sc_prevphase);
|
|
goto reset;
|
|
}
|
|
sc->sc_selid = sc->sc_imess[0];
|
|
NCR_INTS(("selid=%02x ", sc->sc_selid));
|
|
|
|
/* Handle IDENTIFY message. */
|
|
ncr53c9x_msgin(sc);
|
|
|
|
if (sc->sc_state != NCR_CONNECTED &&
|
|
sc->sc_state != NCR_IDENTIFIED) {
|
|
/* IDENTIFY fail?! */
|
|
device_printf(sc->sc_dev, "identify failed, "
|
|
"state %d, intr %02x\n", sc->sc_state,
|
|
sc->sc_espintr);
|
|
goto reset;
|
|
}
|
|
goto shortcut; /* i.e. next phase expected soon */
|
|
}
|
|
|
|
#define NCRINTR_DONE (NCRINTR_FC | NCRINTR_BS)
|
|
if ((sc->sc_espintr & NCRINTR_DONE) == NCRINTR_DONE) {
|
|
/*
|
|
* Arbitration won; examine the `step' register
|
|
* to determine how far the selection could progress.
|
|
*/
|
|
if (ecb == NULL) {
|
|
/*
|
|
* When doing path inquiry during boot
|
|
* FAS100A trigger a stray interrupt which
|
|
* we just ignore instead of panicing.
|
|
*/
|
|
if (sc->sc_state == NCR_IDLE &&
|
|
sc->sc_espstep == 0)
|
|
return;
|
|
panic("ncr53c9x: no nexus");
|
|
}
|
|
|
|
ti = &sc->sc_tinfo[ecb->ccb->ccb_h.target_id];
|
|
|
|
switch (sc->sc_espstep) {
|
|
case 0:
|
|
/*
|
|
* The target did not respond with a
|
|
* message out phase - probably an old
|
|
* device that doesn't recognize ATN.
|
|
* Clear ATN and just continue, the
|
|
* target should be in the command
|
|
* phase.
|
|
* XXX check for command phase?
|
|
*/
|
|
NCRCMD(sc, NCRCMD_RSTATN);
|
|
break;
|
|
|
|
case 1:
|
|
if (ti->curr.period == ti->goal.period &&
|
|
ti->curr.offset == ti->goal.offset &&
|
|
ti->curr.width == ti->goal.width &&
|
|
ecb->tag[0] == 0) {
|
|
device_printf(sc->sc_dev, "step 1 "
|
|
"and no negotiation to perform "
|
|
"or tag to send\n");
|
|
goto reset;
|
|
}
|
|
if (sc->sc_phase != MESSAGE_OUT_PHASE) {
|
|
device_printf(sc->sc_dev, "step 1 "
|
|
"but not in MESSAGE_OUT_PHASE\n");
|
|
goto reset;
|
|
}
|
|
sc->sc_prevphase = MESSAGE_OUT_PHASE; /* XXX */
|
|
if (ecb->flags & ECB_RESET) {
|
|
/*
|
|
* A DEVICE RESET was scheduled and
|
|
* ATNS used. As SEND_DEV_RESET has
|
|
* the highest priority, the target
|
|
* will reset and disconnect and we
|
|
* will end up in ncr53c9x_done w/o
|
|
* negotiating or sending a TAG. So
|
|
* we just break here in order to
|
|
* avoid warnings about negotiation
|
|
* not having completed.
|
|
*/
|
|
ncr53c9x_sched_msgout(SEND_DEV_RESET);
|
|
break;
|
|
}
|
|
if (ti->curr.width != ti->goal.width) {
|
|
ti->flags |= T_WDTRSENT | T_SDTRSENT;
|
|
ncr53c9x_sched_msgout(SEND_WDTR |
|
|
SEND_SDTR);
|
|
}
|
|
if (ti->curr.period != ti->goal.period ||
|
|
ti->curr.offset != ti->goal.offset) {
|
|
ti->flags |= T_SDTRSENT;
|
|
ncr53c9x_sched_msgout(SEND_SDTR);
|
|
}
|
|
if (ecb->tag[0] != 0)
|
|
/* Could not do ATN3 so send TAG. */
|
|
ncr53c9x_sched_msgout(SEND_TAG);
|
|
break;
|
|
|
|
case 3:
|
|
/*
|
|
* Grr, this is supposed to mean
|
|
* "target left command phase prematurely".
|
|
* It seems to happen regularly when
|
|
* sync mode is on.
|
|
* Look at FIFO to see if command went out.
|
|
* (Timing problems?)
|
|
*/
|
|
if (sc->sc_features & NCR_F_DMASELECT) {
|
|
if (sc->sc_cmdlen == 0)
|
|
/* Hope for the best... */
|
|
break;
|
|
} else if ((NCR_READ_REG(sc, NCR_FFLAG)
|
|
& NCRFIFO_FF) == 0) {
|
|
/* Hope for the best... */
|
|
break;
|
|
}
|
|
xpt_print_path(ecb->ccb->ccb_h.path);
|
|
printf("selection failed; %d left in FIFO "
|
|
"[intr %x, stat %x, step %d]\n",
|
|
NCR_READ_REG(sc, NCR_FFLAG) & NCRFIFO_FF,
|
|
sc->sc_espintr, sc->sc_espstat,
|
|
sc->sc_espstep);
|
|
NCRCMD(sc, NCRCMD_FLUSH);
|
|
ncr53c9x_sched_msgout(SEND_ABORT);
|
|
return;
|
|
|
|
case 2:
|
|
/* Select stuck at Command Phase. */
|
|
NCRCMD(sc, NCRCMD_FLUSH);
|
|
break;
|
|
|
|
case 4:
|
|
if (sc->sc_features & NCR_F_DMASELECT &&
|
|
sc->sc_cmdlen != 0) {
|
|
xpt_print_path(ecb->ccb->ccb_h.path);
|
|
printf("select; %lu left in DMA buffer "
|
|
"[intr %x, stat %x, step %d]\n",
|
|
(u_long)sc->sc_cmdlen,
|
|
sc->sc_espintr,
|
|
sc->sc_espstat,
|
|
sc->sc_espstep);
|
|
}
|
|
/* So far, everything went fine. */
|
|
break;
|
|
}
|
|
|
|
sc->sc_prevphase = INVALID_PHASE; /* ??? */
|
|
/* Do an implicit RESTORE POINTERS. */
|
|
sc->sc_dp = ecb->daddr;
|
|
sc->sc_dleft = ecb->dleft;
|
|
sc->sc_state = NCR_CONNECTED;
|
|
break;
|
|
} else {
|
|
device_printf(sc->sc_dev, "unexpected status after "
|
|
"select: [intr %x, stat %x, step %x]\n",
|
|
sc->sc_espintr, sc->sc_espstat, sc->sc_espstep);
|
|
NCRCMD(sc, NCRCMD_FLUSH);
|
|
DELAY(1);
|
|
goto reset;
|
|
}
|
|
if (sc->sc_state == NCR_IDLE) {
|
|
device_printf(sc->sc_dev, "stray interrupt\n");
|
|
return;
|
|
}
|
|
break;
|
|
|
|
case NCR_CONNECTED:
|
|
if ((sc->sc_flags & NCR_ICCS) != 0) {
|
|
/* "Initiate Command Complete Steps" in progress */
|
|
sc->sc_flags &= ~NCR_ICCS;
|
|
|
|
if (!(sc->sc_espintr & NCRINTR_DONE)) {
|
|
device_printf(sc->sc_dev, "ICCS: "
|
|
": [intr %x, stat %x, step %x]\n",
|
|
sc->sc_espintr, sc->sc_espstat,
|
|
sc->sc_espstep);
|
|
}
|
|
ncr53c9x_rdfifo(sc, NCR_RDFIFO_START);
|
|
if (sc->sc_imlen < 2)
|
|
device_printf(sc->sc_dev, "can't get status, "
|
|
"only %d bytes\n", (int)sc->sc_imlen);
|
|
ecb->stat = sc->sc_imess[sc->sc_imlen - 2];
|
|
msg = sc->sc_imess[sc->sc_imlen - 1];
|
|
NCR_PHASE(("<stat:(%x,%x)>", ecb->stat, msg));
|
|
if (msg == MSG_CMDCOMPLETE) {
|
|
ecb->dleft =
|
|
(ecb->flags & ECB_TENTATIVE_DONE) ?
|
|
0 : sc->sc_dleft;
|
|
if ((ecb->flags & ECB_SENSE) == 0)
|
|
ecb->ccb->csio.resid = ecb->dleft;
|
|
sc->sc_state = NCR_CMDCOMPLETE;
|
|
} else
|
|
device_printf(sc->sc_dev, "STATUS_PHASE: "
|
|
"msg %d\n", msg);
|
|
sc->sc_imlen = 0;
|
|
NCRCMD(sc, NCRCMD_MSGOK);
|
|
goto shortcut; /* i.e. wait for disconnect */
|
|
}
|
|
break;
|
|
|
|
default:
|
|
device_printf(sc->sc_dev, "invalid state: %d [intr %x, "
|
|
"phase(c %x, p %x)]\n", sc->sc_state,
|
|
sc->sc_espintr, sc->sc_phase, sc->sc_prevphase);
|
|
goto reset;
|
|
}
|
|
|
|
/*
|
|
* Driver is now in state NCR_CONNECTED, i.e. we
|
|
* have a current command working the SCSI bus.
|
|
*/
|
|
if (sc->sc_state != NCR_CONNECTED || ecb == NULL) {
|
|
panic("ncr53c9x: no nexus");
|
|
}
|
|
|
|
switch (sc->sc_phase) {
|
|
case MESSAGE_OUT_PHASE:
|
|
NCR_PHASE(("MESSAGE_OUT_PHASE "));
|
|
ncr53c9x_msgout(sc);
|
|
sc->sc_prevphase = MESSAGE_OUT_PHASE;
|
|
break;
|
|
|
|
case MESSAGE_IN_PHASE:
|
|
msgin:
|
|
NCR_PHASE(("MESSAGE_IN_PHASE "));
|
|
if ((sc->sc_espintr & NCRINTR_BS) != 0) {
|
|
if ((sc->sc_rev != NCR_VARIANT_FAS366) ||
|
|
!(sc->sc_espstat2 & NCRFAS_STAT2_EMPTY)) {
|
|
NCRCMD(sc, NCRCMD_FLUSH);
|
|
}
|
|
sc->sc_flags |= NCR_WAITI;
|
|
NCRCMD(sc, NCRCMD_TRANS);
|
|
} else if ((sc->sc_espintr & NCRINTR_FC) != 0) {
|
|
if ((sc->sc_flags & NCR_WAITI) == 0) {
|
|
device_printf(sc->sc_dev, "MSGIN: unexpected "
|
|
"FC bit: [intr %x, stat %x, step %x]\n",
|
|
sc->sc_espintr, sc->sc_espstat,
|
|
sc->sc_espstep);
|
|
}
|
|
sc->sc_flags &= ~NCR_WAITI;
|
|
ncr53c9x_rdfifo(sc,
|
|
(sc->sc_prevphase == sc->sc_phase) ?
|
|
NCR_RDFIFO_CONTINUE : NCR_RDFIFO_START);
|
|
ncr53c9x_msgin(sc);
|
|
} else {
|
|
device_printf(sc->sc_dev, "MSGIN: weird bits: "
|
|
"[intr %x, stat %x, step %x]\n",
|
|
sc->sc_espintr, sc->sc_espstat, sc->sc_espstep);
|
|
}
|
|
sc->sc_prevphase = MESSAGE_IN_PHASE;
|
|
goto shortcut; /* i.e. expect data to be ready */
|
|
|
|
case COMMAND_PHASE:
|
|
/*
|
|
* Send the command block. Normally we don't see this
|
|
* phase because the SEL_ATN command takes care of
|
|
* all this. However, we end up here if either the
|
|
* target or we wanted to exchange some more messages
|
|
* first (e.g. to start negotiations).
|
|
*/
|
|
|
|
NCR_PHASE(("COMMAND_PHASE 0x%02x (%d) ",
|
|
ecb->cmd.cmd.opcode, ecb->clen));
|
|
if (NCR_READ_REG(sc, NCR_FFLAG) & NCRFIFO_FF) {
|
|
NCRCMD(sc, NCRCMD_FLUSH);
|
|
/* DELAY(1);*/
|
|
}
|
|
/*
|
|
* If we have more messages to send, e.g. WDTR or SDTR
|
|
* after we've sent a TAG, set ATN so we'll go back to
|
|
* MESSAGE_OUT_PHASE.
|
|
*/
|
|
if (sc->sc_msgpriq) {
|
|
NCRCMD(sc, NCRCMD_SETATN);
|
|
sc->sc_flags |= NCR_ATN;
|
|
}
|
|
if (sc->sc_features & NCR_F_DMASELECT) {
|
|
/* Setup DMA transfer for command. */
|
|
size = ecb->clen;
|
|
sc->sc_cmdlen = size;
|
|
sc->sc_cmdp = (caddr_t)&ecb->cmd.cmd;
|
|
NCRDMA_SETUP(sc, &sc->sc_cmdp, &sc->sc_cmdlen,
|
|
0, &size);
|
|
/* Program the SCSI counter. */
|
|
NCR_SET_COUNT(sc, size);
|
|
|
|
/* Load the count in. */
|
|
NCRCMD(sc, NCRCMD_NOP | NCRCMD_DMA);
|
|
|
|
/* Start the command transfer. */
|
|
NCRCMD(sc, NCRCMD_TRANS | NCRCMD_DMA);
|
|
NCRDMA_GO(sc);
|
|
} else {
|
|
ncr53c9x_wrfifo(sc, (u_char *)&ecb->cmd.cmd, ecb->clen);
|
|
NCRCMD(sc, NCRCMD_TRANS);
|
|
}
|
|
sc->sc_prevphase = COMMAND_PHASE;
|
|
break;
|
|
|
|
case DATA_OUT_PHASE:
|
|
NCR_PHASE(("DATA_OUT_PHASE [%ld] ", (long)sc->sc_dleft));
|
|
NCRCMD(sc, NCRCMD_FLUSH);
|
|
size = ulmin(sc->sc_dleft, sc->sc_maxxfer);
|
|
NCRDMA_SETUP(sc, &sc->sc_dp, &sc->sc_dleft, 0, &size);
|
|
sc->sc_prevphase = DATA_OUT_PHASE;
|
|
goto setup_xfer;
|
|
|
|
case DATA_IN_PHASE:
|
|
NCR_PHASE(("DATA_IN_PHASE "));
|
|
if (sc->sc_rev == NCR_VARIANT_ESP100)
|
|
NCRCMD(sc, NCRCMD_FLUSH);
|
|
size = ulmin(sc->sc_dleft, sc->sc_maxxfer);
|
|
NCRDMA_SETUP(sc, &sc->sc_dp, &sc->sc_dleft, 1, &size);
|
|
sc->sc_prevphase = DATA_IN_PHASE;
|
|
setup_xfer:
|
|
/* Target returned to data phase: wipe "done" memory */
|
|
ecb->flags &= ~ECB_TENTATIVE_DONE;
|
|
|
|
/* Program the SCSI counter. */
|
|
NCR_SET_COUNT(sc, size);
|
|
|
|
/* Load the count in. */
|
|
NCRCMD(sc, NCRCMD_NOP | NCRCMD_DMA);
|
|
|
|
/*
|
|
* Note that if `size' is 0, we've already transceived
|
|
* all the bytes we want but we're still in DATA PHASE.
|
|
* Apparently, the device needs padding. Also, a
|
|
* transfer size of 0 means "maximum" to the chip
|
|
* DMA logic.
|
|
*/
|
|
NCRCMD(sc,
|
|
(size == 0 ? NCRCMD_TRPAD : NCRCMD_TRANS) | NCRCMD_DMA);
|
|
NCRDMA_GO(sc);
|
|
return;
|
|
|
|
case STATUS_PHASE:
|
|
NCR_PHASE(("STATUS_PHASE "));
|
|
sc->sc_flags |= NCR_ICCS;
|
|
NCRCMD(sc, NCRCMD_ICCS);
|
|
sc->sc_prevphase = STATUS_PHASE;
|
|
goto shortcut; /* i.e. expect status results soon */
|
|
|
|
case INVALID_PHASE:
|
|
break;
|
|
|
|
default:
|
|
device_printf(sc->sc_dev,
|
|
"unexpected bus phase; resetting\n");
|
|
goto reset;
|
|
}
|
|
|
|
return;
|
|
|
|
reset:
|
|
ncr53c9x_init(sc, 1);
|
|
return;
|
|
|
|
finish:
|
|
ncr53c9x_done(sc, ecb);
|
|
return;
|
|
|
|
sched:
|
|
sc->sc_state = NCR_IDLE;
|
|
ncr53c9x_sched(sc);
|
|
return;
|
|
|
|
shortcut:
|
|
/*
|
|
* The idea is that many of the SCSI operations take very little
|
|
* time, and going away and getting interrupted is too high an
|
|
* overhead to pay. For example, selecting, sending a message
|
|
* and command and then doing some work can be done in one "pass".
|
|
*
|
|
* The delay is a heuristic. It is 2 when at 20MHz, 2 at 25MHz and 1
|
|
* at 40MHz. This needs testing.
|
|
*/
|
|
microtime(&wait);
|
|
wait.tv_usec += 50 / sc->sc_freq;
|
|
if (wait.tv_usec > 1000000) {
|
|
wait.tv_sec++;
|
|
wait.tv_usec -= 1000000;
|
|
}
|
|
do {
|
|
if (NCRDMA_ISINTR(sc))
|
|
goto again;
|
|
microtime(&cur);
|
|
} while (cur.tv_sec <= wait.tv_sec && cur.tv_usec <= wait.tv_usec);
|
|
}
|
|
|
|
static void
|
|
ncr53c9x_abort(struct ncr53c9x_softc *sc, struct ncr53c9x_ecb *ecb)
|
|
{
|
|
|
|
NCR_LOCK_ASSERT(sc, MA_OWNED);
|
|
|
|
/* 2 secs for the abort */
|
|
ecb->timeout = NCR_ABORT_TIMEOUT;
|
|
ecb->flags |= ECB_ABORT;
|
|
|
|
if (ecb == sc->sc_nexus) {
|
|
/*
|
|
* If we're still selecting, the message will be scheduled
|
|
* after selection is complete.
|
|
*/
|
|
if (sc->sc_state == NCR_CONNECTED)
|
|
ncr53c9x_sched_msgout(SEND_ABORT);
|
|
|
|
/*
|
|
* Reschedule callout.
|
|
*/
|
|
callout_reset(&ecb->ch, mstohz(ecb->timeout),
|
|
ncr53c9x_callout, ecb);
|
|
} else {
|
|
/*
|
|
* Just leave the command where it is.
|
|
* XXX - what choice do we have but to reset the SCSI
|
|
* eventually?
|
|
*/
|
|
if (sc->sc_state == NCR_IDLE)
|
|
ncr53c9x_sched(sc);
|
|
}
|
|
}
|
|
|
|
static void
|
|
ncr53c9x_callout(void *arg)
|
|
{
|
|
struct ncr53c9x_ecb *ecb = arg;
|
|
union ccb *ccb = ecb->ccb;
|
|
struct ncr53c9x_softc *sc = ecb->sc;
|
|
struct ncr53c9x_tinfo *ti;
|
|
|
|
NCR_LOCK_ASSERT(sc, MA_OWNED);
|
|
|
|
ti = &sc->sc_tinfo[ccb->ccb_h.target_id];
|
|
xpt_print_path(ccb->ccb_h.path);
|
|
device_printf(sc->sc_dev, "timed out [ecb %p (flags 0x%x, dleft %x, "
|
|
"stat %x)], <state %d, nexus %p, phase(l %x, c %x, p %x), "
|
|
"resid %lx, msg(q %x,o %x) %s>",
|
|
ecb, ecb->flags, ecb->dleft, ecb->stat,
|
|
sc->sc_state, sc->sc_nexus,
|
|
NCR_READ_REG(sc, NCR_STAT),
|
|
sc->sc_phase, sc->sc_prevphase,
|
|
(long)sc->sc_dleft, sc->sc_msgpriq, sc->sc_msgout,
|
|
NCRDMA_ISACTIVE(sc) ? "DMA active" : "");
|
|
#if defined(NCR53C9X_DEBUG) && NCR53C9X_DEBUG > 1
|
|
printf("TRACE: %s.", ecb->trace);
|
|
#endif
|
|
|
|
if (ecb->flags & ECB_ABORT) {
|
|
/* Abort timed out. */
|
|
printf(" AGAIN\n");
|
|
ncr53c9x_init(sc, 1);
|
|
} else {
|
|
/* Abort the operation that has timed out. */
|
|
printf("\n");
|
|
ccb->ccb_h.status = CAM_CMD_TIMEOUT;
|
|
ncr53c9x_abort(sc, ecb);
|
|
|
|
/* Disable sync mode if stuck in a data phase. */
|
|
if (ecb == sc->sc_nexus &&
|
|
ti->curr.offset != 0 &&
|
|
(sc->sc_phase & (MSGI | CDI)) == 0) {
|
|
/* XXX ASYNC CALLBACK! */
|
|
ti->goal.offset = 0;
|
|
xpt_print_path(ccb->ccb_h.path);
|
|
printf("sync negotiation disabled\n");
|
|
}
|
|
}
|
|
}
|
|
|
|
static void
|
|
ncr53c9x_watch(void *arg)
|
|
{
|
|
struct ncr53c9x_softc *sc = (struct ncr53c9x_softc *)arg;
|
|
struct ncr53c9x_linfo *li;
|
|
struct ncr53c9x_tinfo *ti;
|
|
time_t old;
|
|
int t;
|
|
|
|
NCR_LOCK_ASSERT(sc, MA_OWNED);
|
|
|
|
/* Delete any structures that have not been used in 10min. */
|
|
old = time_second - (10 * 60);
|
|
|
|
for (t = 0; t < sc->sc_ntarg; t++) {
|
|
ti = &sc->sc_tinfo[t];
|
|
li = LIST_FIRST(&ti->luns);
|
|
while (li) {
|
|
if (li->last_used < old &&
|
|
li->untagged == NULL &&
|
|
li->used == 0) {
|
|
if (li->lun < NCR_NLUN)
|
|
ti->lun[li->lun] = NULL;
|
|
LIST_REMOVE(li, link);
|
|
free(li, M_DEVBUF);
|
|
/* Restart the search at the beginning. */
|
|
li = LIST_FIRST(&ti->luns);
|
|
continue;
|
|
}
|
|
li = LIST_NEXT(li, link);
|
|
}
|
|
}
|
|
callout_reset(&sc->sc_watchdog, 60 * hz, ncr53c9x_watch, sc);
|
|
}
|