freebsd

mirror of https://git.FreeBSD.org/src.git synced 2024-12-24 11:29:10 +00:00

History

John Dyson 7197c8af33 SMP Natoma motherboards cannot know if you are booting a UP or SMP OS. This mod makes sure that the Natoma chipset is set into the correct mode. In the case of my P6DNF, when booting a UP kernel, I see a substantial improvement in the latency of certain operations. It appears that the cache hit latency is curiously improved the most, per lat_mem_rd.		1997-08-16 07:18:51 +00:00
..
aic7870.c	Modify my copyright notice to allow the sequencer to be used with GPLed	1997-06-27 19:39:34 +00:00
brktree_reg.h	1.15 4/18/97 John-Mark Gurney <gurney_j@resnet.uoregon.edu>	1997-05-01 00:16:31 +00:00
brooktree848.c	Added 2 new defines:	1997-06-14 19:10:53 +00:00
bt9xx.c	Removed unused #includes.	1997-08-02 14:33:27 +00:00
cy_pci.c	Back out part 1 of the MCFH that changed $Id$ to $FreeBSD$. We are not	1997-02-22 09:48:43 +00:00
cy_pcireg.h	Back out part 1 of the MCFH that changed $Id$ to $FreeBSD$. We are not	1997-02-22 09:48:43 +00:00
dc21040reg.h	Import Matt's if_de driver 970703 release. This (apparently) supports	1997-08-03 12:17:39 +00:00
ide_pci.c	Removed unused #includes.	1997-08-02 14:33:27 +00:00
ide_pcireg.h	Add support for busmaster DMA on some PCI IDE chipsets.	1997-07-29 12:57:25 +00:00
if_de.c	Merge Matt's if_de.c changes in.	1997-08-03 13:00:42 +00:00
if_devar.h	Import Matt's if_de driver 970703 release. This (apparently) supports	1997-08-03 12:17:39 +00:00
if_ed_p.c	Add the NetVin 5000 series NE2000 PCI card vendor and device IDs.	1997-08-14 07:53:07 +00:00
if_en_pci.c	import Chuck Cranor's ATM driver	1997-05-09 07:48:14 +00:00
if_fpa.c	Removed unused #includes.	1997-08-02 14:33:27 +00:00
if_fxp.c	Removed unused #includes.	1997-08-02 14:33:27 +00:00
if_fxpreg.h	Added support for the Intel 82555 PHY chip which is being used on newer	1997-06-13 22:34:52 +00:00
if_lnc_p.c	Removed unused #includes.	1997-08-02 14:33:27 +00:00
if_sr_p.c	Back out part 1 of the MCFH that changed $Id$ to $FreeBSD$. We are not	1997-02-22 09:48:43 +00:00
if_vx_pci.c	Don't cast function pointers to (void *). This will cause warnings.	1997-07-01 00:45:45 +00:00
locate.pl
meteor_reg.h
meteor.c	Don't include <sys/ioctl.h> in the kernel. Stage 1: don't include	1997-03-24 11:25:10 +00:00
ncr.c	Removed unused #includes.	1997-08-02 14:33:27 +00:00
ncrreg.h	Remove two features that have been reported to cause problems with	1997-08-06 20:25:54 +00:00
pci_compat.c	Removed unused #includes.	1997-08-02 14:33:27 +00:00
pci_ioctl.h	Add PCI LKM support.	1997-01-21 23:23:40 +00:00
pci.c	Removed unused #includes.	1997-08-02 14:33:27 +00:00
pcireg.h	PCI_CLASS_MASS_STORAGE (under PCI_COMPAT) was used in a driver in LINT	1997-06-01 16:00:43 +00:00
pcisupport.c	SMP Natoma motherboards cannot know if you are booting a UP or SMP OS. This	1997-08-16 07:18:51 +00:00
pcivar.h	Completely replace the PCI bus driver code to make it better reflect	1997-05-26 15:08:43 +00:00
README.bt848	Fixed omission of reference to ioctl_bt848.h when installing on 2.2.	1997-05-01 00:42:54 +00:00
README.de	Back out part 1 of the MCFH that changed $Id$ to $FreeBSD$. We are not	1997-02-22 09:48:43 +00:00
README.de-le	Back out part 1 of the MCFH that changed $Id$ to $FreeBSD$. We are not	1997-02-22 09:48:43 +00:00
scsiiom.c	Tekram supplied driver for their DC390 and DC390T controllers.	1996-12-15 23:40:48 +00:00
tek390.c	Fix problem in the DC390_DefaultEEprom subroutine, which could lead	1997-08-11 08:49:08 +00:00
tek390.h	Rename DIAGNOSTIC to DMA_DIAGNOSTIC.	1996-12-18 11:35:12 +00:00
wd82371.c	Removed unused #includes.	1997-08-02 14:33:27 +00:00
wd82371reg.h	Back out part 1 of the MCFH that changed $Id$ to $FreeBSD$. We are not	1997-02-22 09:48:43 +00:00
wdc_p.c	Removed unused #includes.	1997-08-02 14:33:27 +00:00

README.de-le

$Id$

----------------

The enclosed drivers should be considered beta-test software.  These
drivers are in no way supported by Digital Equipment.  See the
disclaimers in the sources for more information.  Please be aware that
Digital does not employee me to write drivers for FreeBSD.

This kit contains one driver:

	de	DEC DE435 PCI NIC or compatible

See README.de for information and installation instruction specific to this
driver.

Could you please send me the startup messages in the boot
long along with the type of your PC once the driver configures?  

If you have any problems, comments, suggestions, rant or raves, don't
hesitate to send me mail @ thomas@lkg.dec.com.

Lastly, if you change or modify the code, I want context diffs of your
changes.  I want this to the canonical DEC EtherWORKS driver kit for
FreeBSD, NetBSD, BSD/386, and any other BSD based O/S.  Please make
sure your diffs are approriate conditionalized.

Thanks,
Matt Thomas
--
Mail:	thomas@lkg.dec.com
URL:	http://ftp.digital.com/~thomas/