mirror of
https://git.FreeBSD.org/src.git
synced 2024-12-22 11:17:19 +00:00
673d91916d
o don't strip the Ethernet header from inbound packets; pass packets up the stack intact (required significant changes to some drivers) o reference common definitions in net/ethernet.h (e.g. ETHER_ALIGN) o track ether_ifattach/ether_ifdetach API changes o track bpf changes (use BPF_TAP and BPF_MTAP) o track vlan changes (ifnet capabilities, revised processing scheme, etc.) o use if_input to pass packets "up" o call ether_ioctl for default handling of ioctls Reviewed by: many Approved by: re
303 lines
8.1 KiB
C
303 lines
8.1 KiB
C
/*
|
|
* All Rights Reserved, Copyright (C) Fujitsu Limited 1995
|
|
*
|
|
* This software may be used, modified, copied, distributed, and sold, in
|
|
* both source and binary form provided that the above copyright, these
|
|
* terms and the following disclaimer are retained. The name of the author
|
|
* and/or the contributor may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND THE CONTRIBUTOR ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR THE CONTRIBUTOR BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION.
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/socket.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/module.h>
|
|
|
|
#include <sys/bus.h>
|
|
#include <machine/bus.h>
|
|
#include <machine/resource.h>
|
|
|
|
#include <net/ethernet.h>
|
|
#include <net/if.h>
|
|
#include <net/if_mib.h>
|
|
#include <net/if_media.h>
|
|
|
|
#include <netinet/in.h>
|
|
#include <netinet/if_ether.h>
|
|
|
|
#include <i386/isa/ic/mb86960.h>
|
|
#include <dev/fe/if_fereg.h>
|
|
#include <dev/fe/if_fevar.h>
|
|
|
|
#include <dev/pccard/pccardvar.h>
|
|
#include <dev/pccard/pccarddevs.h>
|
|
#include "card_if.h"
|
|
#include <pccard/cardinfo.h>
|
|
|
|
/*
|
|
* PC-Card (PCMCIA) specific code.
|
|
*/
|
|
static int fe_pccard_probe(device_t);
|
|
static int fe_pccard_attach(device_t);
|
|
static int fe_pccard_detach(device_t);
|
|
static int fe_pccard_match(device_t);
|
|
|
|
static const struct fe_pccard_product {
|
|
struct pccard_product mpp_product;
|
|
u_int32_t mpp_ioalign; /* required alignment */
|
|
int mpp_enet_maddr;
|
|
} fe_pccard_products[] = {
|
|
{ PCMCIA_CARD(TDK, LAK_CD021BX, 0), 0, -1 },
|
|
{ PCMCIA_CARD(TDK, LAK_CF010, 0), 0, -1 },
|
|
#if 0 /* XXX 86960-based? */
|
|
{ PCMCIA_CARD(TDK, LAK_DFL9610, 1), 0, -1 },
|
|
#endif
|
|
{ PCMCIA_CARD(CONTEC, CNETPC, 0), 0, -1 },
|
|
{ PCMCIA_CARD(FUJITSU, LA501, 0), 0x20, -1 },
|
|
{ PCMCIA_CARD(FUJITSU, LA10S, 0), 0, -1 },
|
|
{ PCMCIA_CARD(RATOC, REX_R280, 0), 0, 0x1fc },
|
|
{ { NULL } }
|
|
};
|
|
|
|
static int
|
|
fe_pccard_match(device_t dev)
|
|
{
|
|
const struct pccard_product *pp;
|
|
|
|
if ((pp = pccard_product_lookup(dev,
|
|
(const struct pccard_product *)fe_pccard_products,
|
|
sizeof(fe_pccard_products[0]), NULL)) != NULL) {
|
|
device_set_desc(dev, pp->pp_name);
|
|
return 0;
|
|
}
|
|
return EIO;
|
|
}
|
|
|
|
static device_method_t fe_pccard_methods[] = {
|
|
/* Device interface */
|
|
DEVMETHOD(device_probe, pccard_compat_probe),
|
|
DEVMETHOD(device_attach, pccard_compat_attach),
|
|
DEVMETHOD(device_detach, fe_pccard_detach),
|
|
|
|
/* Card interface */
|
|
DEVMETHOD(card_compat_match, fe_pccard_match),
|
|
DEVMETHOD(card_compat_probe, fe_pccard_probe),
|
|
DEVMETHOD(card_compat_attach, fe_pccard_attach),
|
|
|
|
{ 0, 0 }
|
|
};
|
|
|
|
static driver_t fe_pccard_driver = {
|
|
"fe",
|
|
fe_pccard_methods,
|
|
sizeof (struct fe_softc)
|
|
};
|
|
|
|
DRIVER_MODULE(fe, pccard, fe_pccard_driver, fe_devclass, 0, 0);
|
|
|
|
|
|
static int fe_probe_mbh(device_t);
|
|
static int fe_probe_tdk(device_t);
|
|
|
|
/*
|
|
* Initialize the device - called from Slot manager.
|
|
*/
|
|
static int
|
|
fe_pccard_probe(device_t dev)
|
|
{
|
|
struct fe_softc *sc;
|
|
int error;
|
|
|
|
/* Prepare for the device probe process. */
|
|
sc = device_get_softc(dev);
|
|
sc->sc_unit = device_get_unit(dev);
|
|
|
|
pccard_get_ether(dev, sc->sc_enaddr);
|
|
|
|
/* Probe for supported cards. */
|
|
if ((error = fe_probe_mbh(dev)) == 0)
|
|
goto end;
|
|
fe_release_resource(dev);
|
|
|
|
if ((error = fe_probe_tdk(dev)) == 0)
|
|
goto end;
|
|
fe_release_resource(dev);
|
|
|
|
end:
|
|
if (error == 0)
|
|
error = fe_alloc_irq(dev, 0);
|
|
|
|
fe_release_resource(dev);
|
|
return (error);
|
|
}
|
|
|
|
static int
|
|
fe_pccard_attach(device_t dev)
|
|
{
|
|
struct fe_softc *sc = device_get_softc(dev);
|
|
|
|
if (sc->port_used)
|
|
fe_alloc_port(dev, sc->port_used);
|
|
fe_alloc_irq(dev, 0);
|
|
|
|
return fe_attach(dev);
|
|
}
|
|
|
|
/*
|
|
* feunload - unload the driver and clear the table.
|
|
* XXX TODO:
|
|
* This is usually called when the card is ejected, but
|
|
* can be caused by a modunload of a controller driver.
|
|
* The idea is to reset the driver's view of the device
|
|
* and ensure that any driver entry points such as
|
|
* read and write do not hang.
|
|
*/
|
|
static int
|
|
fe_pccard_detach(device_t dev)
|
|
{
|
|
struct fe_softc *sc = device_get_softc(dev);
|
|
struct ifnet *ifp = &sc->arpcom.ac_if;
|
|
|
|
fe_stop(sc);
|
|
ether_ifdetach(ifp);
|
|
bus_teardown_intr(dev, sc->irq_res, sc->irq_handle);
|
|
fe_release_resource(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
/*
|
|
* Probe and initialization for Fujitsu MBH10302 PCMCIA Ethernet interface.
|
|
* Note that this is for 10302 only; MBH10304 is handled by fe_probe_tdk().
|
|
*/
|
|
static void
|
|
fe_init_mbh(struct fe_softc *sc)
|
|
{
|
|
/* Minimal initialization of 86960. */
|
|
DELAY(200);
|
|
fe_outb(sc, FE_DLCR6, sc->proto_dlcr6 | FE_D6_DLC_DISABLE);
|
|
DELAY(200);
|
|
|
|
/* Disable all interrupts. */
|
|
fe_outb(sc, FE_DLCR2, 0);
|
|
fe_outb(sc, FE_DLCR3, 0);
|
|
|
|
/* Enable master interrupt flag. */
|
|
fe_outb(sc, FE_MBH0, FE_MBH0_MAGIC | FE_MBH0_INTR_ENABLE);
|
|
}
|
|
|
|
static int
|
|
fe_probe_mbh(device_t dev)
|
|
{
|
|
struct fe_softc *sc = device_get_softc(dev);
|
|
|
|
static struct fe_simple_probe_struct probe_table [] = {
|
|
{ FE_DLCR2, 0x58, 0x00 },
|
|
{ FE_DLCR4, 0x08, 0x00 },
|
|
{ FE_DLCR6, 0xFF, 0xB6 },
|
|
{ 0 }
|
|
};
|
|
|
|
/* MBH10302 occupies 32 I/O addresses. */
|
|
if (fe_alloc_port(dev, 32))
|
|
return ENXIO;
|
|
|
|
/* Ethernet MAC address should *NOT* have been given by pccardd,
|
|
if this is a true MBH10302; i.e., Ethernet address must be
|
|
"all-zero" upon entry. */
|
|
if (sc->sc_enaddr[0] || sc->sc_enaddr[1] || sc->sc_enaddr[2] ||
|
|
sc->sc_enaddr[3] || sc->sc_enaddr[4] || sc->sc_enaddr[5])
|
|
return ENXIO;
|
|
|
|
/* Fill the softc struct with default values. */
|
|
fe_softc_defaults(sc);
|
|
|
|
/*
|
|
* See if MBH10302 is on its address.
|
|
* I'm not sure the following probe code works. FIXME.
|
|
*/
|
|
if (!fe_simple_probe(sc, probe_table))
|
|
return ENXIO;
|
|
|
|
/* Get our station address from EEPROM. */
|
|
fe_inblk(sc, FE_MBH10, sc->sc_enaddr, ETHER_ADDR_LEN);
|
|
|
|
/* Make sure we got a valid station address. */
|
|
if (!valid_Ether_p(sc->sc_enaddr, 0))
|
|
return ENXIO;
|
|
|
|
/* Determine the card type. */
|
|
sc->type = FE_TYPE_MBH;
|
|
sc->typestr = "MBH10302 (PCMCIA)";
|
|
|
|
/* We seems to need our own IDENT bits... FIXME. */
|
|
sc->proto_dlcr7 = FE_D7_BYTSWP_LH | FE_D7_IDENT_NICE;
|
|
|
|
/* Setup hooks. We need a special initialization procedure. */
|
|
sc->init = fe_init_mbh;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Probe and initialization for TDK/CONTEC PCMCIA Ethernet interface.
|
|
* by MASUI Kenji <masui@cs.titech.ac.jp>
|
|
*
|
|
* (Contec uses TDK Ethenet chip -- hosokawa)
|
|
*
|
|
* This version of fe_probe_tdk has been rewrote to handle
|
|
* *generic* PC card implementation of Fujitsu MB8696x family. The
|
|
* name _tdk is just for a historical reason. :-)
|
|
*/
|
|
static int
|
|
fe_probe_tdk (device_t dev)
|
|
{
|
|
struct fe_softc *sc = device_get_softc(dev);
|
|
|
|
static struct fe_simple_probe_struct probe_table [] = {
|
|
{ FE_DLCR2, 0x50, 0x00 },
|
|
{ FE_DLCR4, 0x08, 0x00 },
|
|
/* { FE_DLCR5, 0x80, 0x00 }, Does not work well. */
|
|
{ 0 }
|
|
};
|
|
|
|
/* C-NET(PC)C occupies 16 I/O addresses. */
|
|
if (fe_alloc_port(dev, 16))
|
|
return ENXIO;
|
|
|
|
/* Fill the softc struct with default values. */
|
|
fe_softc_defaults(sc);
|
|
|
|
/*
|
|
* See if C-NET(PC)C is on its address.
|
|
*/
|
|
if (!fe_simple_probe(sc, probe_table))
|
|
return ENXIO;
|
|
|
|
/* Determine the card type. */
|
|
sc->type = FE_TYPE_TDK;
|
|
sc->typestr = "Generic MB8696x/78Q837x Ethernet (PCMCIA)";
|
|
|
|
/* Make sure we got a valid station address. */
|
|
if (!valid_Ether_p(sc->sc_enaddr, 0))
|
|
return ENXIO;
|
|
|
|
return 0;
|
|
}
|