mirror of
https://git.FreeBSD.org/src.git
synced 2024-12-14 10:09:48 +00:00
b45f9c03c7
o Much cleanly separate NetBSD(XS) / FreeBSD(CAM) codes.
o Improve tagged queing support (full QTAG).
o Improve quirk support.
o Improve parity error retry.
o Impliment wide negotheation.
o Cmd link support.
o Add copyright of CAM part.
o Change for CAM_NEW_TRAN_CODE.
o Work around for buggy KME UJDCD450.
o stg: add disconnet condition.
o nsp: use suspend I/O.
and more. I thank Honda-san.
conf/options.pc98: add CT_USE_RELOCATE_OFFSET and CT_BUS_WEIGHT
dev/{ct,ncv,nsp,stg}/*_{pccard,isa}.c: add splcam() before calling
attach/detach functions.
Tested by: bsd-nomads
Obtained from: NetBSD/pc98
188 lines
6.9 KiB
C
188 lines
6.9 KiB
C
/* $FreeBSD$ */
|
|
/* $NecBSD: ncr53c500reg.h,v 1.5.14.1 2001/06/08 06:27:44 honda Exp $ */
|
|
/* $NetBSD$ */
|
|
|
|
/*
|
|
* [NetBSD for NEC PC-98 series]
|
|
* Copyright (c) 1995, 1996, 1997, 1998
|
|
* NetBSD/pc98 porting staff. All rights reserved.
|
|
* Copyright (c) 1995, 1996, 1997, 1998
|
|
* Naofumi HONDA. All rights reserved.
|
|
* Copyright (c) 1995, 1996, 1997, 1998
|
|
* Kouichi Matsuda. All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
|
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
|
|
* INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
|
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
|
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#ifndef _NCR53C500REG_H_
|
|
#define _NCR53C500REG_H_
|
|
|
|
/* Control Register Set 0 */
|
|
#define NCVIOSZ 0x10
|
|
|
|
#define cr0_tclsb 0x00 /* RW - Transfer Count Low */
|
|
#define cr0_tcmsb 0x01 /* RW - Transfer Count Mid */
|
|
#define cr0_sfifo 0x02 /* RW - FIFO data */
|
|
#define cr0_cmd 0x03 /* RW - Command (2 deep) */
|
|
#define cr0_stat 0x04 /* RO - Status */
|
|
#define cr0_dstid 0x04 /* WO - Select/Reselect Bus ID */
|
|
#define cr0_istat 0x05 /* RO - Interrupt */
|
|
#define cr0_srtout 0x05 /* WO - Select/Reselect Timeout */
|
|
#define cr0_seq 0x06 /* RO - Sequence Step */
|
|
#define cr0_period 0x06 /* WO - Synch Transfer Period */
|
|
#define cr0_sffl 0x07 /* RO - FIFO FLags */
|
|
#define cr0_offs 0x07 /* WO - Synch Ofset */
|
|
#define cr0_cfg1 0x08 /* RW - Configuration #1 */
|
|
#define cr0_clk 0x09 /* WO - Clock Conversion Factor */
|
|
#define cr0_tst 0x0a /* WO - Test (Chip Test Only) */
|
|
#define cr0_cfg2 0x0b /* RW - Configuration #2 */
|
|
#define cr0_cfg3 0x0c /* RW - Configuration #3 */
|
|
#define cr0_cfg4 0x0d /* RW - Configuration #4 */
|
|
#define cr0_tchsb 0x0e /* RW - Transfer Count High */
|
|
#define cr0_fifo_bottom 0x0f /* WO - FIFO bottom */
|
|
|
|
/* Control Register Set 1 */
|
|
#define cr1_jumper 0x00 /* RW - Jumper Sense Port */
|
|
#define cr1_sram_ptr 0x01 /* RW - SRAM Address Pointer */
|
|
#define cr1_sram_data 0x02 /* RW - SRAM Data */
|
|
#define cr1_fdata 0x04 /* RW - PIO FIFO */
|
|
#define cr1_fstat 0x08 /* RW - PIO Status */
|
|
#define cr1_atacmd 0x09 /* RW - ATA Command/Status */
|
|
#define cr1_ataerr 0x0a /* RW - ATA Features/Error */
|
|
#define cr1_pflag 0x0b /* RW - PIO Flag Interrupt Enable */
|
|
#define cr1_cfg5 0x0d /* RW - Configuration #5 */
|
|
#define cr1_sig 0x0e /* RO - Signature */
|
|
#define cr1_cfg6 0x0f /* RW - Configuration #6 */
|
|
|
|
/* atacmd (MPS110 ONLY) */
|
|
#define ATACMD_POWDOWN 0x2d
|
|
#define ATACMD_ENGAGE 0x24
|
|
|
|
/* cr0_sffl regster */
|
|
#define CR0_SFFLR_BMASK 0x1f /* scsi fifo byte mask */
|
|
|
|
/* cfg4 */
|
|
#define C4_ANE 0x04
|
|
|
|
/* cfg2 */
|
|
#define C2_SCSI2 0x08 /* SCSI-2 Enable */
|
|
#define C2_FE 0x40 /* Features Enable */
|
|
|
|
/* cfg1 */
|
|
#define C1_SLOW 0x80 /* Slow Cable Mode */
|
|
#define C1_SRR 0x40 /* SCSI Reset Rep Int Dis */
|
|
#define C1_PARENB 0x10 /* Enable Parity Check */
|
|
|
|
/* clk factor */
|
|
#define CLK_40M_F 0x00
|
|
#define CLK_25M_F 0x05
|
|
#define CLK_30M_F 0x06
|
|
#define CLK_35M_F 0x07
|
|
|
|
/* interrupt status register */
|
|
#define INTR_SBR 0x80 /* SCSI Bus Reset */
|
|
#define INTR_ILL 0x40 /* Illegal Command */
|
|
#define INTR_DIS 0x20 /* Disconnect */
|
|
#define INTR_BS 0x10 /* Bus Service */
|
|
#define INTR_FC 0x08 /* Function Complete */
|
|
#define INTR_RESEL 0x04 /* Reselected */
|
|
#define INTR_SELATN 0x02 /* Select with ATN */
|
|
#define INTR_SEL 0x01 /* Selected */
|
|
#define INTR_RESELECT (INTR_RESEL | INTR_FC)
|
|
|
|
/* status register */
|
|
#define STAT_INT 0x80 /* Interrupt */
|
|
#define STAT_GE 0x40 /* Gross Error */
|
|
#define STAT_PE 0x20 /* Parity Error */
|
|
#define STAT_TC 0x10 /* Terminal Count */
|
|
|
|
/* phase bits */
|
|
#define IOI 0x01
|
|
#define CDI 0x02
|
|
#define MSGI 0x04
|
|
|
|
/* Information transfer phases */
|
|
#define DATA_OUT_PHASE (0)
|
|
#define DATA_IN_PHASE (IOI)
|
|
#define COMMAND_PHASE (CDI)
|
|
#define STATUS_PHASE (CDI|IOI)
|
|
#define MESSAGE_OUT_PHASE (MSGI|CDI)
|
|
#define MESSAGE_IN_PHASE (MSGI|CDI|IOI)
|
|
|
|
#define PHASE_MASK (MSGI|CDI|IOI)
|
|
|
|
/* fifo status register */
|
|
#define FIFO_SMASK 0x1e
|
|
#define FIFO_E 0x10 /* fifo empty */
|
|
#define FIFO_B 0x00 /* there exists any */
|
|
#define FIFO_1 0x08 /* 1/3 <= bytes < 2/3 */
|
|
#define FIFO_2 0x04 /* 2/3 <= bytes < full */
|
|
#define FIFO_F 0x02 /* full */
|
|
#define FIFO_EN 0x01 /* fifo direction */
|
|
#define FIFO_BRK 0x40 /* phase miss */
|
|
|
|
#define FIFO_F_SZ 128
|
|
#define FIFO_1_SZ 44
|
|
#define FIFO_2_SZ 84
|
|
|
|
/* pflags */
|
|
#define PFR_WRITE 0x01
|
|
|
|
/* Commands */
|
|
#define CMD_DMA 0x80 /* DMA Bit */
|
|
#define CMD_NOP 0x00 /* No Operation */
|
|
#define CMD_FLUSH 0x01 /* Flush FIFO */
|
|
#define CMD_RSTCHIP 0x02 /* Reset Chip */
|
|
#define CMD_RSTSCSI 0x03 /* Reset SCSI Bus */
|
|
#define CMD_RESEL 0x40 /* Reselect Sequence */
|
|
#define CMD_SELNATN 0x41 /* Select without ATN */
|
|
#define CMD_SELATN 0x42 /* Select with ATN */
|
|
#define CMD_SELATNS 0x43 /* Select with ATN & Stop */
|
|
#define CMD_ENSEL 0x44 /* Enable (Re)Selection */
|
|
#define CMD_DISSEL 0x45 /* Disable (Re)Selection */
|
|
#define CMD_SELATN3 0x46 /* Select with ATN3 */
|
|
#define CMD_RESEL3 0x47 /* Reselect3 Sequence */
|
|
#define CMD_SNDMSG 0x20 /* Send Message */
|
|
#define CMD_SNDSTAT 0x21 /* Send Status */
|
|
#define CMD_SNDDATA 0x22 /* Send Data */
|
|
#define CMD_DISCSEQ 0x23 /* Disconnect Sequence */
|
|
#define CMD_TERMSEQ 0x24 /* Terminate Sequence */
|
|
#define CMD_TCCS 0x25 /* Target Command Comp Seq */
|
|
#define CMD_DISC 0x27 /* Disconnect */
|
|
#define CMD_RECMSG 0x28 /* Receive Message */
|
|
#define CMD_RECCMD 0x29 /* Receive Command */
|
|
#define CMD_RECDATA 0x2a /* Receive Data */
|
|
#define CMD_RECCSEQ 0x2b /* Receive Command Sequence */
|
|
#define CMD_ABORT 0x04 /* Target Abort DMA */
|
|
#define CMD_TRANS 0x10 /* Transfer Information */
|
|
#define CMD_ICCS 0x11 /* Initiator Cmd Comp Seq */
|
|
#define CMD_MSGOK 0x12 /* Message Accepted */
|
|
#define CMD_TRPAD 0x18 /* Transfer Pad */
|
|
#define CMD_SETATN 0x1a /* Set ATN */
|
|
#define CMD_RSTATN 0x1b /* Reset ATN */
|
|
|
|
/* Default timeout */
|
|
#define SEL_TOUT 0xa3
|
|
#endif /* !_NCR53C500REG_H_ */
|