mirror of
https://git.FreeBSD.org/src.git
synced 2024-12-20 11:11:24 +00:00
347 lines
9.2 KiB
C
347 lines
9.2 KiB
C
/*-
|
|
* Copyright (c) 2005 Poul-Henning Kamp
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/module.h>
|
|
#include <sys/bus.h>
|
|
#include <dev/pci/pcireg.h>
|
|
#include <dev/pci/pcivar.h>
|
|
|
|
#include <machine/bus.h>
|
|
#include <machine/resource.h>
|
|
#include <machine/stdarg.h>
|
|
#include <sys/rman.h>
|
|
|
|
/* vtophys */
|
|
#include <vm/vm.h>
|
|
#include <vm/pmap.h>
|
|
#include <machine/pmap.h>
|
|
|
|
#define UPD7210_HW_DRIVER 1
|
|
#include <dev/ieee488/upd7210.h>
|
|
|
|
struct tnt_softc {
|
|
int foo;
|
|
struct upd7210 upd7210;
|
|
|
|
struct resource *res[3];
|
|
void *intr_handler;
|
|
};
|
|
|
|
static struct resource_spec tnt_res_spec[] = {
|
|
{ SYS_RES_MEMORY, PCIR_BAR(0), RF_ACTIVE},
|
|
{ SYS_RES_MEMORY, PCIR_BAR(1), RF_ACTIVE},
|
|
{ SYS_RES_IRQ, 0, RF_ACTIVE | RF_SHAREABLE},
|
|
{ -1, 0 }
|
|
};
|
|
|
|
enum tnt4882reg {
|
|
dir = 0x00,
|
|
cdor = 0x00,
|
|
isr1 = 0x02,
|
|
imr1 = 0x02,
|
|
isr2 = 0x04,
|
|
imr2 = 0x04,
|
|
accwr = 0x05,
|
|
spsr = 0x06,
|
|
spmr = 0x06,
|
|
intr = 0x07,
|
|
adsr = 0x08,
|
|
admr = 0x08,
|
|
cnt2 = 0x09,
|
|
cptr = 0x0a,
|
|
auxmr = 0x0a,
|
|
tauxcr = 0x0a, /* 9914 mode register */
|
|
cnt3 = 0x0b,
|
|
adr0 = 0x0c,
|
|
adr = 0x0c,
|
|
hssel = 0x0d,
|
|
adr1 = 0x0e,
|
|
eosr = 0x0e,
|
|
sts1 = 0x10,
|
|
cfg = 0x10,
|
|
dsr = 0x11,
|
|
sh_cnt = 0x11,
|
|
imr3 = 0x12,
|
|
hier = 0x13,
|
|
cnt0 = 0x14,
|
|
misc = 0x15,
|
|
cnt1 = 0x16,
|
|
csr = 0x17,
|
|
keyreg = 0x17,
|
|
fifob = 0x18,
|
|
fifoa = 0x19,
|
|
isr3 = 0x1a,
|
|
ccr = 0x1a,
|
|
sasr = 0x1b,
|
|
dcr = 0x1b,
|
|
sts2 = 0x1c,
|
|
cmdr = 0x1c,
|
|
isr0 = 0x1d,
|
|
imr0 = 0x1d,
|
|
timer = 0x1e,
|
|
bsr = 0x1f,
|
|
bcr = 0x1f
|
|
};
|
|
|
|
struct tst {
|
|
enum {RD, WT, xDELAY, END}
|
|
action;
|
|
enum tnt4882reg reg;
|
|
uint8_t val;
|
|
};
|
|
|
|
/*
|
|
* From NI Application note 095:
|
|
* Writing Functional Self-Tests for the TNT4882 GPIB Interface Chip
|
|
* XXX: fill in the rest ?
|
|
*/
|
|
static struct tst tst_reset[] = {
|
|
{WT, tauxcr, 0x80}, /* chip reset if in 9914 mode */
|
|
{WT, auxmr, 0x80}, /* swrst if swapped */
|
|
{WT, tauxcr, 0x99}, /* switch to 7210 mode */
|
|
{WT, auxmr, 0x99}, /* switch to 7210 mode if swapped */
|
|
{WT, auxmr, 0x02}, /* execute chip reset */
|
|
{WT, keyreg, 0x00}, /* important! clear the swap bit */
|
|
{WT, eosr, 0x00}, /* clear EOS register */
|
|
{WT, cdor, 0x00}, /* clear data lines */
|
|
{WT, imr1, 0x00}, /* disable all interrupts */
|
|
{WT, imr2, 0x00},
|
|
{WT, imr0, 0x80},
|
|
{WT, adr, 0x80},
|
|
{WT, adr, 0x00},
|
|
{WT, admr, 0x00}, /* clear addressing modes */
|
|
{WT, auxmr, 0x00}, /* release from idle state with pon */
|
|
{WT, auxmr, 0x60}, /* reset ppr */
|
|
{WT, bcr, 0x00}, /* reset bcr */
|
|
{WT, misc, 0x04}, /* set wrap plug bit */
|
|
{WT, cmdr, 0xB2}, /* issue soft reset */
|
|
{WT, hssel, 0x00}, /* select two-chip mode */
|
|
{END, 0, 0}
|
|
};
|
|
|
|
static struct tst tst_read_reg[] = {
|
|
{RD, isr1, 0x00}, /* Verify mask registers are clear */
|
|
{RD, isr2, 0x00},
|
|
{RD, adsr, 0x40}, /* Verify ATN is not asserted */
|
|
{RD, adr0, 0x00}, /* Verify Primary address not set */
|
|
{RD, adr1, 0x00}, /* Verify Secondary address not set */
|
|
{RD, sts1, 0x8B}, /* Verify DONE, STOP, HALT, and GSYNC set */
|
|
{RD, isr3, 0x19}, /* Verify STOP, Not Full FIFO, & DONE set */
|
|
{RD, sts2, 0x9A}, /* Verify FIFO A/B is empty */
|
|
{RD, sasr, 0x00}, /* Verify clear */
|
|
{RD, isr0, 0x01}, /* Verify SYNC bit is set */
|
|
{END, 0, 0}
|
|
};
|
|
|
|
static struct tst tst_bsr_dcr[] = {
|
|
{WT, bcr, 0x55}, /* Set DAV, NRFD, SRQ, and REN */
|
|
{WT, dcr, 0xAA}, /* Write pattern to GPIB data lines */
|
|
{RD, bsr, 0x55}, /* Verify DAV, NRFD, SRQ, and REN are set */
|
|
{RD, dsr, 0xAA}, /* Verify data pattern written previously */
|
|
{WT, bcr, 0xAA}, /* Set ATN, NDAC, EOI, & IFC */
|
|
{WT, dcr, 0x55}, /* Write pattern to GPIB data lines */
|
|
{RD, bsr, 0xAA}, /* Verify ATN, NDAC, EOI, & IFC are set */
|
|
{RD, dsr, 0x55}, /* Verify data pattern written previously */
|
|
{WT, bcr, 0x00}, /* Clear control lines */
|
|
{WT, dcr, 0x00}, /* Clear data lines */
|
|
{RD, bsr, 0x00}, /* Verify control lines are clear */
|
|
{RD, dsr, 0x00}, /* Verify data lines are clear */
|
|
{END, 0, 0}
|
|
};
|
|
|
|
static struct tst tst_adr0_1[] = {
|
|
{WT, adr, 0x55}, /* Set Primary talk address */
|
|
{WT, adr, 0xAA}, /* Set Secondary listen address */
|
|
{RD, adr0, 0x55}, /* Read Primary address */
|
|
{RD, adr1, 0x2A}, /* Read Secondary address */
|
|
{WT, adr, 0x2A}, /* Set Primay listen address */
|
|
{WT, adr, 0xD5}, /* Set Secondary talk address */
|
|
{RD, adr0, 0x2A}, /* Read Primary address */
|
|
{RD, adr1, 0x55}, /* Read Secondary address */
|
|
{END, 0, 0}
|
|
};
|
|
|
|
static struct tst tst_cdor_dir[] = {
|
|
{WT, admr, 0xF0}, /* program AT-GPIB as talker only and
|
|
* listener only */
|
|
{RD, isr1, 0x02}, /* check DO bit set */
|
|
{RD, adsr, 0x46}, /* check AT-GPIB is both talker active
|
|
* and listener active */
|
|
{WT, cdor, 0xAA}, /* write out data byte */
|
|
{xDELAY, 0, 1}, /* One ISA I/O Cycle (500-ns) */
|
|
{RD, isr1, 0x03}, /* check DO and DI bits set */
|
|
{RD, dir, 0xAA}, /* verify data received */
|
|
{WT, cdor, 0x55}, /* write out data byte */
|
|
{xDELAY, 0, 1}, /* One ISA I/O Cycle (500-ns) */
|
|
{RD, dir, 0x55}, /* verify data received */
|
|
{END, 0, 0}
|
|
};
|
|
|
|
static struct tst tst_spmr_spsr[] = {
|
|
{WT, spsr, 0x00}, /* Write pattern to SPSR register */
|
|
{RD, spmr, 0x00}, /* Read back previously written pattern */
|
|
{WT, spsr, 0xBF}, /* Write pattern to SPSR register */
|
|
{RD, spmr, 0xBF}, /* Read back previously written pattern */
|
|
{END, 0, 0}
|
|
};
|
|
|
|
static struct tst tst_count0_1[] = {
|
|
{WT, cnt0, 0x55}, /* Verify every other bit can be set */
|
|
{WT, cnt1, 0xAA},
|
|
{RD, cnt0, 0x55}, /* Read back previously written pattern */
|
|
{RD, cnt1, 0xAA},
|
|
{WT, cnt0, 0xAA}, /* Verify every other bit can be set */
|
|
{WT, cnt1, 0x55},
|
|
{RD, cnt0, 0xAA}, /* Read back previously written pattern */
|
|
{RD, cnt1, 0x55},
|
|
{END, 0, 0}
|
|
};
|
|
|
|
static int
|
|
tst_exec(struct tnt_softc *sc, struct tst *tp, const char *name)
|
|
{
|
|
uint8_t u;
|
|
int step;
|
|
|
|
for (step = 0; tp->action != END; tp++, step++) {
|
|
switch (tp->action) {
|
|
case WT:
|
|
bus_write_1(sc->res[1], tp->reg, tp->val);
|
|
break;
|
|
case RD:
|
|
u = bus_read_1(sc->res[1], tp->reg);
|
|
if (u != tp->val) {
|
|
printf(
|
|
"Test %s, step %d: reg(%02x) = %02x",
|
|
name, step, tp->reg, u);
|
|
printf( "should have been %02x\n", tp->val);
|
|
return (1);
|
|
}
|
|
break;
|
|
case xDELAY:
|
|
DELAY(tp->val);
|
|
break;
|
|
default:
|
|
printf("Unknown action in test %s, step %d: %d\n",
|
|
name, step, tp->action);
|
|
return (1);
|
|
}
|
|
}
|
|
if (bootverbose)
|
|
printf("Test %s passed\n", name);
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
tnt_probe(device_t dev)
|
|
{
|
|
|
|
if (pci_get_vendor(dev) == 0x1093 && pci_get_device(dev) == 0xc801) {
|
|
device_set_desc(dev, "NI PCI-GPIB");
|
|
return (BUS_PROBE_DEFAULT);
|
|
}
|
|
return (ENXIO);
|
|
}
|
|
|
|
static int
|
|
tnt_attach(device_t dev)
|
|
{
|
|
struct tnt_softc *sc;
|
|
int error, i;
|
|
|
|
sc = device_get_softc(dev);
|
|
|
|
error = bus_alloc_resources(dev, tnt_res_spec, sc->res);
|
|
if (error)
|
|
return (error);
|
|
|
|
error = bus_setup_intr(dev, sc->res[2], INTR_TYPE_MISC | INTR_MPSAFE,
|
|
NULL, upd7210intr, &sc->upd7210, &sc->intr_handler);
|
|
|
|
/* Necessary magic for MITE */
|
|
bus_write_4(sc->res[0], 0xc0, rman_get_start(sc->res[1]) | 0x80);
|
|
|
|
tst_exec(sc, tst_reset, "Reset");
|
|
tst_exec(sc, tst_read_reg, "Read registers");
|
|
tst_exec(sc, tst_bsr_dcr, "BSR & DCR");
|
|
tst_exec(sc, tst_adr0_1, "ADR0,1");
|
|
tst_exec(sc, tst_cdor_dir, "CDOR/DIR");
|
|
tst_exec(sc, tst_spmr_spsr, "CPMR/SPSR");
|
|
tst_exec(sc, tst_count0_1, "COUNT0:1");
|
|
tst_exec(sc, tst_reset, "Reset");
|
|
|
|
/* pass 7210 interrupts through */
|
|
bus_write_1(sc->res[1], imr3, 0x02);
|
|
|
|
for (i = 0; i < 8; i++) {
|
|
sc->upd7210.reg_res[i] = sc->res[1];
|
|
sc->upd7210.reg_offset[i] = i * 2;
|
|
}
|
|
|
|
/* No DMA help */
|
|
sc->upd7210.dmachan = -1;
|
|
|
|
upd7210attach(&sc->upd7210);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
tnt_detach(device_t dev)
|
|
{
|
|
struct tnt_softc *sc;
|
|
|
|
sc = device_get_softc(dev);
|
|
bus_teardown_intr(dev, sc->res[2], sc->intr_handler);
|
|
upd7210detach(&sc->upd7210);
|
|
|
|
bus_release_resources(dev, tnt_res_spec, sc->res);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static device_method_t tnt4882_methods[] = {
|
|
DEVMETHOD(device_probe, tnt_probe),
|
|
DEVMETHOD(device_attach, tnt_attach),
|
|
DEVMETHOD(device_detach, tnt_detach),
|
|
{ 0, 0 }
|
|
};
|
|
|
|
static driver_t pci_gpib_driver = {
|
|
"tnt4882",
|
|
tnt4882_methods,
|
|
sizeof(struct tnt_softc)
|
|
};
|
|
|
|
static devclass_t pci_gpib_devclass;
|
|
|
|
DRIVER_MODULE(pci_gpib, pci, pci_gpib_driver, pci_gpib_devclass, 0, 0);
|