Warner Losh 8e5f761422 On my Lenovo T400, a Atheros 2413 has a problem powering up ... sometimes. It will power up wrong and identify itself badly: cardbus0: <network, ethernet> at device 0.0 (no driver attached) cardbus0: <simple comms, UART> at device 0.1 (no driver attached) cardbus0: <old, non-VGA display device> at device 0.2 (no driver attached) cardbus0: <old, non-VGA display device> at device 0.3 (no driver attached) cardbus0: <old, non-VGA display device> at device 0.4 (no driver attached) cardbus0: <old, non-VGA display device> at device 0.5 (no driver attached) cardbus0: <old, non-VGA display device> at device 0.6 (no driver attached) cardbus0: <old, non-VGA display device> at device 0.7 (no driver attached) All the higher numbered functions (.2 and above) have a config space of all 0's. This smells a bit like a special debug mode, but the current atheros driver doesn't cope. It is unclear if this card is just a flake, or if we're doing something wrong in the power-up sequence. Put a work around into the code that tests for this rather unusual condition. If we power a CardBus device up, and the device says it is multi-function, and any of the functions have a 0 device ID, try the power-up sequence again.		2015-02-18 05:53:04 +00:00
..
cardbus_cis.c	Partially revert 222753: If a CardBus card stores its CIS in a BAR, delete	2011-09-12 15:21:52 +00:00
cardbus_cis.h
cardbus_device.c
cardbus.c	On my Lenovo T400, a Atheros 2413 has a problem powering up	2015-02-18 05:53:04 +00:00
cardbusreg.h
cardbusvar.h	Add support for managing PCI bus numbers. As with BARs and PCI-PCI bridge	2014-02-12 04:30:37 +00:00