1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-21 11:13:30 +00:00
freebsd/usr.sbin/bhyve/pci_virtio_block.c
Peter Grehan 000f0835b2 Fix off-by-1 error in assert.
Submitted by:	Tycho Nightingale (tycho.nightingale@pluribusnetworks.com)
2013-08-27 03:49:47 +00:00

335 lines
8.3 KiB
C

/*-
* Copyright (c) 2011 NetApp, Inc.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY NETAPP, INC ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL NETAPP, INC OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/linker_set.h>
#include <sys/stat.h>
#include <sys/uio.h>
#include <sys/ioctl.h>
#include <sys/disk.h>
#include <errno.h>
#include <fcntl.h>
#include <stdio.h>
#include <stdlib.h>
#include <stdint.h>
#include <string.h>
#include <strings.h>
#include <unistd.h>
#include <assert.h>
#include <pthread.h>
#include "bhyverun.h"
#include "pci_emul.h"
#include "virtio.h"
#define VTBLK_RINGSZ 64
#define VTBLK_MAXSEGS 32
#define VTBLK_S_OK 0
#define VTBLK_S_IOERR 1
/*
* Host capabilities
*/
#define VTBLK_S_HOSTCAPS \
( 0x00000004 | /* host maximum request segments */ \
VIRTIO_RING_F_INDIRECT_DESC ) /* indirect descriptors */
/*
* Config space "registers"
*/
struct vtblk_config {
uint64_t vbc_capacity;
uint32_t vbc_size_max;
uint32_t vbc_seg_max;
uint16_t vbc_geom_c;
uint8_t vbc_geom_h;
uint8_t vbc_geom_s;
uint32_t vbc_blk_size;
uint32_t vbc_sectors_max;
} __packed;
/*
* Fixed-size block header
*/
struct virtio_blk_hdr {
#define VBH_OP_READ 0
#define VBH_OP_WRITE 1
#define VBH_FLAG_BARRIER 0x80000000 /* OR'ed into vbh_type */
uint32_t vbh_type;
uint32_t vbh_ioprio;
uint64_t vbh_sector;
} __packed;
/*
* Debug printf
*/
static int pci_vtblk_debug;
#define DPRINTF(params) if (pci_vtblk_debug) printf params
#define WPRINTF(params) printf params
/*
* Per-device softc
*/
struct pci_vtblk_softc {
struct virtio_softc vbsc_vs;
struct vqueue_info vbsc_vq;
int vbsc_fd;
struct vtblk_config vbsc_cfg;
};
static void pci_vtblk_reset(void *);
static void pci_vtblk_notify(void *, struct vqueue_info *);
static int pci_vtblk_cfgread(void *, int, int, uint32_t *);
static int pci_vtblk_cfgwrite(void *, int, int, uint32_t);
static struct virtio_consts vtblk_vi_consts = {
"vtblk", /* our name */
1, /* we support 1 virtqueue */
sizeof(struct vtblk_config), /* config reg size */
pci_vtblk_reset, /* reset */
pci_vtblk_notify, /* device-wide qnotify */
pci_vtblk_cfgread, /* read PCI config */
pci_vtblk_cfgwrite, /* write PCI config */
VTBLK_S_HOSTCAPS, /* our capabilities */
};
static void
pci_vtblk_reset(void *vsc)
{
struct pci_vtblk_softc *sc = vsc;
DPRINTF(("vtblk: device reset requested !\n"));
vi_reset_dev(&sc->vbsc_vs);
}
static void
pci_vtblk_proc(struct pci_vtblk_softc *sc, struct vqueue_info *vq)
{
struct virtio_blk_hdr *vbh;
uint8_t *status;
int i, n;
int err;
int iolen;
int writeop, type;
off_t offset;
struct iovec iov[VTBLK_MAXSEGS + 2];
uint16_t flags[VTBLK_MAXSEGS + 2];
n = vq_getchain(vq, iov, VTBLK_MAXSEGS + 2, flags);
/*
* The first descriptor will be the read-only fixed header,
* and the last is for status (hence +2 above and below).
* The remaining iov's are the actual data I/O vectors.
*
* XXX - note - this fails on crash dump, which does a
* VIRTIO_BLK_T_FLUSH with a zero transfer length
*/
assert (n >= 3 && n <= VTBLK_MAXSEGS + 2);
assert((flags[0] & VRING_DESC_F_WRITE) == 0);
assert(iov[0].iov_len == sizeof(struct virtio_blk_hdr));
vbh = iov[0].iov_base;
status = iov[--n].iov_base;
assert(iov[n].iov_len == 1);
assert(flags[n] & VRING_DESC_F_WRITE);
/*
* XXX
* The guest should not be setting the BARRIER flag because
* we don't advertise the capability.
*/
type = vbh->vbh_type & ~VBH_FLAG_BARRIER;
writeop = (type == VBH_OP_WRITE);
offset = vbh->vbh_sector * DEV_BSIZE;
iolen = 0;
for (i = 1; i < n; i++) {
/*
* - write op implies read-only descriptor,
* - read op implies write-only descriptor,
* therefore test the inverse of the descriptor bit
* to the op.
*/
assert(((flags[i] & VRING_DESC_F_WRITE) == 0) == writeop);
iolen += iov[i].iov_len;
}
DPRINTF(("virtio-block: %s op, %d bytes, %d segs, offset %ld\n\r",
writeop ? "write" : "read", iolen, i - 1, offset));
if (writeop)
err = pwritev(sc->vbsc_fd, iov + 1, i - 1, offset);
else
err = preadv(sc->vbsc_fd, iov + 1, i - 1, offset);
*status = err < 0 ? VTBLK_S_IOERR : VTBLK_S_OK;
/*
* Return the descriptor back to the host.
* We wrote 1 byte (our status) to host.
*/
vq_relchain(vq, 1);
}
static void
pci_vtblk_notify(void *vsc, struct vqueue_info *vq)
{
struct pci_vtblk_softc *sc = vsc;
vq_startchains(vq);
while (vq_has_descs(vq))
pci_vtblk_proc(sc, vq);
vq_endchains(vq, 1); /* Generate interrupt if appropriate. */
}
static int
pci_vtblk_init(struct vmctx *ctx, struct pci_devinst *pi, char *opts)
{
struct stat sbuf;
struct pci_vtblk_softc *sc;
off_t size;
int fd;
int sectsz;
int use_msix;
const char *env_msi;
if (opts == NULL) {
printf("virtio-block: backing device required\n");
return (1);
}
/*
* The supplied backing file has to exist
*/
fd = open(opts, O_RDWR);
if (fd < 0) {
perror("Could not open backing file");
return (1);
}
if (fstat(fd, &sbuf) < 0) {
perror("Could not stat backing file");
close(fd);
return (1);
}
/*
* Deal with raw devices
*/
size = sbuf.st_size;
sectsz = DEV_BSIZE;
if (S_ISCHR(sbuf.st_mode)) {
if (ioctl(fd, DIOCGMEDIASIZE, &size) < 0 ||
ioctl(fd, DIOCGSECTORSIZE, &sectsz)) {
perror("Could not fetch dev blk/sector size");
close(fd);
return (1);
}
assert(size != 0);
assert(sectsz != 0);
}
sc = malloc(sizeof(struct pci_vtblk_softc));
memset(sc, 0, sizeof(struct pci_vtblk_softc));
/* record fd of storage device/file */
sc->vbsc_fd = fd;
/* init virtio softc and virtqueues */
vi_softc_linkup(&sc->vbsc_vs, &vtblk_vi_consts, sc, pi, &sc->vbsc_vq);
sc->vbsc_vq.vq_qsize = VTBLK_RINGSZ;
/* sc->vbsc_vq.vq_notify = we have no per-queue notify */
/* setup virtio block config space */
sc->vbsc_cfg.vbc_capacity = size / sectsz;
sc->vbsc_cfg.vbc_seg_max = VTBLK_MAXSEGS;
sc->vbsc_cfg.vbc_blk_size = sectsz;
sc->vbsc_cfg.vbc_size_max = 0; /* not negotiated */
sc->vbsc_cfg.vbc_geom_c = 0; /* no geometry */
sc->vbsc_cfg.vbc_geom_h = 0;
sc->vbsc_cfg.vbc_geom_s = 0;
sc->vbsc_cfg.vbc_sectors_max = 0;
/*
* Should we move some of this into virtio.c? Could
* have the device, class, and subdev_0 as fields in
* the virtio constants structure.
*/
pci_set_cfgdata16(pi, PCIR_DEVICE, VIRTIO_DEV_BLOCK);
pci_set_cfgdata16(pi, PCIR_VENDOR, VIRTIO_VENDOR);
pci_set_cfgdata8(pi, PCIR_CLASS, PCIC_STORAGE);
pci_set_cfgdata16(pi, PCIR_SUBDEV_0, VIRTIO_TYPE_BLOCK);
use_msix = 1;
if ((env_msi = getenv("BHYVE_USE_MSI"))) {
if (strcasecmp(env_msi, "yes") == 0)
use_msix = 0;
}
if (vi_intr_init(&sc->vbsc_vs, 1, use_msix))
return (1);
vi_set_io_bar(&sc->vbsc_vs, 0);
return (0);
}
static int
pci_vtblk_cfgwrite(void *vsc, int offset, int size, uint32_t value)
{
DPRINTF(("vtblk: write to readonly reg %d\n\r", offset));
return (1);
}
static int
pci_vtblk_cfgread(void *vsc, int offset, int size, uint32_t *retval)
{
struct pci_vtblk_softc *sc = vsc;
void *ptr;
/* our caller has already verified offset and size */
ptr = (uint8_t *)&sc->vbsc_cfg + offset;
memcpy(retval, ptr, size);
return (0);
}
struct pci_devemu pci_de_vblk = {
.pe_emu = "virtio-blk",
.pe_init = pci_vtblk_init,
.pe_barwrite = vi_pci_write,
.pe_barread = vi_pci_read
};
PCI_EMUL_SET(pci_de_vblk);