mirror/freebsd
1
0
Fork 0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-17 10:26:15 +00:00
Code Issues Releases Activity
7b185ef809
freebsd/sys/pci
History
Steve Passe 737e75a810 Added frequencies for north american HRC cable. 
Submitted by:	Yixin Jin <yjin@rain.cs.ucla.edu> (I think)
Resubmitted by:	Kenneth Merry <ken@gt.ed.net>
1997-08-17 05:50:56 +00:00
..
aic7870.c Modify my copyright notice to allow the sequencer to be used with GPLed 1997-06-27 19:39:34 +00:00
brktree_reg.h 1.15 4/18/97 John-Mark Gurney <gurney_j@resnet.uoregon.edu> 1997-05-01 00:16:31 +00:00
brooktree848.c Added frequencies for north american HRC cable. 1997-08-17 05:50:56 +00:00
bt9xx.c Removed unused #includes. 1997-08-02 14:33:27 +00:00
cy_pci.c Back out part 1 of the MCFH that changed $Id$ to $FreeBSD$. We are not 1997-02-22 09:48:43 +00:00
cy_pcireg.h Back out part 1 of the MCFH that changed $Id$ to $FreeBSD$. We are not 1997-02-22 09:48:43 +00:00
dc21040reg.h Import Matt's if_de driver 970703 release. This (apparently) supports 1997-08-03 12:17:39 +00:00
ide_pci.c Removed unused #includes. 1997-08-02 14:33:27 +00:00
ide_pcireg.h Add support for busmaster DMA on some PCI IDE chipsets. 1997-07-29 12:57:25 +00:00
if_de.c Merge Matt's if_de.c changes in. 1997-08-03 13:00:42 +00:00
if_devar.h Import Matt's if_de driver 970703 release. This (apparently) supports 1997-08-03 12:17:39 +00:00
if_ed_p.c Add the NetVin 5000 series NE2000 PCI card vendor and device IDs. 1997-08-14 07:53:07 +00:00
if_en_pci.c import Chuck Cranor's ATM driver 1997-05-09 07:48:14 +00:00
if_fpa.c Removed unused #includes. 1997-08-02 14:33:27 +00:00
if_fxp.c Removed unused #includes. 1997-08-02 14:33:27 +00:00
if_fxpreg.h Added support for the Intel 82555 PHY chip which is being used on newer 1997-06-13 22:34:52 +00:00
if_lnc_p.c Removed unused #includes. 1997-08-02 14:33:27 +00:00
if_sr_p.c Back out part 1 of the MCFH that changed $Id$ to $FreeBSD$. We are not 1997-02-22 09:48:43 +00:00
if_vx_pci.c Don't cast function pointers to (void *). This will cause warnings. 1997-07-01 00:45:45 +00:00
locate.pl Perl script to convert NCR script address into label+offset. 1995-09-08 19:37:11 +00:00
meteor_reg.h Here is a patch that fix a few problems with the RGB version of 1996-06-07 03:03:25 +00:00
meteor.c Don't include <sys/ioctl.h> in the kernel. Stage 1: don't include 1997-03-24 11:25:10 +00:00
ncr.c Removed unused #includes. 1997-08-02 14:33:27 +00:00
ncrreg.h Remove two features that have been reported to cause problems with 1997-08-06 20:25:54 +00:00
pci_compat.c Removed unused #includes. 1997-08-02 14:33:27 +00:00
pci_ioctl.h Add PCI LKM support. 1997-01-21 23:23:40 +00:00
pci.c Removed unused #includes. 1997-08-02 14:33:27 +00:00
pcireg.h PCI_CLASS_MASS_STORAGE (under PCI_COMPAT) was used in a driver in LINT 1997-06-01 16:00:43 +00:00
pcisupport.c SMP Natoma motherboards cannot know if you are booting a UP or SMP OS. This 1997-08-16 07:18:51 +00:00
pcivar.h Completely replace the PCI bus driver code to make it better reflect 1997-05-26 15:08:43 +00:00
README.bt848 Fixed omission of reference to ioctl_bt848.h when installing on 2.2. 1997-05-01 00:42:54 +00:00
README.de Back out part 1 of the MCFH that changed $Id$ to $FreeBSD$. We are not 1997-02-22 09:48:43 +00:00
README.de-le Back out part 1 of the MCFH that changed $Id$ to $FreeBSD$. We are not 1997-02-22 09:48:43 +00:00
scsiiom.c Tekram supplied driver for their DC390 and DC390T controllers. 1996-12-15 23:40:48 +00:00
tek390.c Fix problem in the DC390_DefaultEEprom subroutine, which could lead 1997-08-11 08:49:08 +00:00
tek390.h Rename DIAGNOSTIC to DMA_DIAGNOSTIC. 1996-12-18 11:35:12 +00:00
wd82371.c Removed unused #includes. 1997-08-02 14:33:27 +00:00
wd82371reg.h Back out part 1 of the MCFH that changed $Id$ to $FreeBSD$. We are not 1997-02-22 09:48:43 +00:00
wdc_p.c Removed unused #includes. 1997-08-02 14:33:27 +00:00

README.de-le 

$Id$

----------------

The enclosed drivers should be considered beta-test software.  These
drivers are in no way supported by Digital Equipment.  See the
disclaimers in the sources for more information.  Please be aware that
Digital does not employee me to write drivers for FreeBSD.

This kit contains one driver:

	de	DEC DE435 PCI NIC or compatible

See README.de for information and installation instruction specific to this
driver.

Could you please send me the startup messages in the boot
long along with the type of your PC once the driver configures?  

If you have any problems, comments, suggestions, rant or raves, don't
hesitate to send me mail @ thomas@lkg.dec.com.

Lastly, if you change or modify the code, I want context diffs of your
changes.  I want this to the canonical DEC EtherWORKS driver kit for
FreeBSD, NetBSD, BSD/386, and any other BSD based O/S.  Please make
sure your diffs are approriate conditionalized.

Thanks,
Matt Thomas
--
Mail:	thomas@lkg.dec.com
URL:	http://ftp.digital.com/~thomas/