1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-17 10:26:15 +00:00
freebsd/sys/kern/subr_disklabel.c
Bruce Evans e36b4f594a Use only the correct raw partition for writing labels. Don't use the
partition that the label ioctl is being done on just because it has
offset 0, since there is no guarantee that such a partition is large
enough to contain the label.  Don't use the wrong raw partition (0
instead of RAW_PART).

This fixes problems rewriting bizarre labels (with a nonzero offset
for the 'a' partition) in newfs(8).  Such labels shouldn't normally
be used, but creating them was allowed if the ioctl was done on the
raw partition, and sysinstall creates them if the root partition isn't
allocated first.

Note that allowing write access to a partition other than the one that
has been checked for write access doesn't increase security holes
significantly, since write access to any partition already allows
changing the in-core label.

This fix should be in 3.0R.  Rev.1.26 of newfs/newfs.c shouldn't be
in 3.0R.
1998-10-17 07:49:04 +00:00

411 lines
12 KiB
C

/*
* Copyright (c) 1982, 1986, 1988, 1993
* The Regents of the University of California. All rights reserved.
* (c) UNIX System Laboratories, Inc.
* All or some portions of this file are derived from material licensed
* to the University of California by American Telephone and Telegraph
* Co. or Unix System Laboratories, Inc. and are reproduced herein with
* the permission of UNIX System Laboratories, Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the University of
* California, Berkeley and its contributors.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @(#)ufs_disksubr.c 8.5 (Berkeley) 1/21/94
* $Id: ufs_disksubr.c,v 1.37 1998/10/16 10:14:21 jkh Exp $
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/buf.h>
#include <sys/conf.h>
#include <sys/disklabel.h>
#include <sys/diskslice.h>
#include <sys/syslog.h>
/*
* Seek sort for disks.
*
* The buf_queue keep two queues, sorted in ascending block order. The first
* queue holds those requests which are positioned after the current block
* (in the first request); the second, which starts at queue->switch_point,
* holds requests which came in after their block number was passed. Thus
* we implement a one way scan, retracting after reaching the end of the drive
* to the first request on the second queue, at which time it becomes the
* first queue.
*
* A one-way scan is natural because of the way UNIX read-ahead blocks are
* allocated.
*/
void
bufqdisksort(bufq, bp)
struct buf_queue_head *bufq;
struct buf *bp;
{
struct buf *bq;
struct buf *bn;
struct buf *be;
be = TAILQ_LAST(&bufq->queue, buf_queue);
/*
* If the queue is empty or we are an
* ordered transaction, then it's easy.
*/
if ((bq = bufq_first(bufq)) == NULL
|| (bp->b_flags & B_ORDERED) != 0) {
bufq_insert_tail(bufq, bp);
return;
} else if (bufq->insert_point != NULL) {
/*
* A certain portion of the list is
* "locked" to preserve ordering, so
* we can only insert after the insert
* point.
*/
bq = bufq->insert_point;
} else {
/*
* If we lie before the last removed (currently active)
* request, and are not inserting ourselves into the
* "locked" portion of the list, then we must add ourselves
* to the second request list.
*/
if (bp->b_pblkno < bufq->last_pblkno) {
bq = bufq->switch_point;
/*
* If we are starting a new secondary list,
* then it's easy.
*/
if (bq == NULL) {
bufq->switch_point = bp;
bufq_insert_tail(bufq, bp);
return;
}
/*
* If we lie ahead of the current switch point,
* insert us before the switch point and move
* the switch point.
*/
if (bp->b_pblkno < bq->b_pblkno) {
bufq->switch_point = bp;
TAILQ_INSERT_BEFORE(bq, bp, b_act);
return;
}
} else {
if (bufq->switch_point != NULL)
be = TAILQ_PREV(bufq->switch_point,
buf_queue, b_act);
/*
* If we lie between last_pblkno and bq,
* insert before bq.
*/
if (bp->b_pblkno < bq->b_pblkno) {
TAILQ_INSERT_BEFORE(bq, bp, b_act);
return;
}
}
}
/*
* Request is at/after our current position in the list.
* Optimize for sequential I/O by seeing if we go at the tail.
*/
if (bp->b_pblkno > be->b_pblkno) {
TAILQ_INSERT_AFTER(&bufq->queue, be, bp, b_act);
return;
}
/* Otherwise, insertion sort */
while ((bn = TAILQ_NEXT(bq, b_act)) != NULL) {
/*
* We want to go after the current request if it is the end
* of the first request list, or if the next request is a
* larger cylinder than our request.
*/
if (bn == bufq->switch_point
|| bp->b_pblkno < bn->b_pblkno)
break;
bq = bn;
}
TAILQ_INSERT_AFTER(&bufq->queue, bq, bp, b_act);
}
/*
* Attempt to read a disk label from a device using the indicated strategy
* routine. The label must be partly set up before this: secpercyl, secsize
* and anything required in the strategy routine (e.g., dummy bounds for the
* partition containing the label) must be filled in before calling us.
* Returns NULL on success and an error string on failure.
*/
char *
readdisklabel(dev, strat, lp)
dev_t dev;
d_strategy_t *strat;
register struct disklabel *lp;
{
register struct buf *bp;
struct disklabel *dlp;
char *msg = NULL;
bp = geteblk((int)lp->d_secsize);
bp->b_dev = dev;
bp->b_blkno = LABELSECTOR * ((int)lp->d_secsize/DEV_BSIZE);
bp->b_bcount = lp->d_secsize;
bp->b_flags &= ~B_INVAL;
bp->b_flags |= B_BUSY | B_READ;
(*strat)(bp);
if (biowait(bp))
msg = "I/O error";
else for (dlp = (struct disklabel *)bp->b_data;
dlp <= (struct disklabel *)((char *)bp->b_data +
lp->d_secsize - sizeof(*dlp));
dlp = (struct disklabel *)((char *)dlp + sizeof(long))) {
if (dlp->d_magic != DISKMAGIC || dlp->d_magic2 != DISKMAGIC) {
if (msg == NULL)
msg = "no disk label";
} else if (dlp->d_npartitions > MAXPARTITIONS ||
dkcksum(dlp) != 0)
msg = "disk label corrupted";
else {
*lp = *dlp;
msg = NULL;
break;
}
}
bp->b_flags |= B_INVAL | B_AGE;
brelse(bp);
return (msg);
}
/*
* Check new disk label for sensibility before setting it.
*/
int
setdisklabel(olp, nlp, openmask)
register struct disklabel *olp, *nlp;
u_long openmask;
{
register int i;
register struct partition *opp, *npp;
/*
* Check it is actually a disklabel we are looking at.
*/
if (nlp->d_magic != DISKMAGIC || nlp->d_magic2 != DISKMAGIC ||
dkcksum(nlp) != 0)
return (EINVAL);
/*
* For each partition that we think is open,
*/
while ((i = ffs((long)openmask)) != 0) {
i--;
/*
* Check it is not changing....
*/
openmask &= ~(1 << i);
if (nlp->d_npartitions <= i)
return (EBUSY);
opp = &olp->d_partitions[i];
npp = &nlp->d_partitions[i];
if (npp->p_offset != opp->p_offset || npp->p_size < opp->p_size)
return (EBUSY);
/*
* Copy internally-set partition information
* if new label doesn't include it. XXX
* (If we are using it then we had better stay the same type)
* This is possibly dubious, as someone else noted (XXX)
*/
if (npp->p_fstype == FS_UNUSED && opp->p_fstype != FS_UNUSED) {
npp->p_fstype = opp->p_fstype;
npp->p_fsize = opp->p_fsize;
npp->p_frag = opp->p_frag;
npp->p_cpg = opp->p_cpg;
}
}
nlp->d_checksum = 0;
nlp->d_checksum = dkcksum(nlp);
*olp = *nlp;
return (0);
}
/*
* Write disk label back to device after modification.
*/
int
writedisklabel(dev, strat, lp)
dev_t dev;
d_strategy_t *strat;
register struct disklabel *lp;
{
struct buf *bp;
struct disklabel *dlp;
int error = 0;
if (lp->d_partitions[RAW_PART].p_offset != 0)
return (EXDEV); /* not quite right */
bp = geteblk((int)lp->d_secsize);
bp->b_dev = dkmodpart(dev, RAW_PART);
bp->b_blkno = LABELSECTOR * ((int)lp->d_secsize/DEV_BSIZE);
bp->b_bcount = lp->d_secsize;
#if 1
/*
* We read the label first to see if it's there,
* in which case we will put ours at the same offset into the block..
* (I think this is stupid [Julian])
* Note that you can't write a label out over a corrupted label!
* (also stupid.. how do you write the first one? by raw writes?)
*/
bp->b_flags &= ~B_INVAL;
bp->b_flags |= B_BUSY | B_READ;
(*strat)(bp);
error = biowait(bp);
if (error)
goto done;
for (dlp = (struct disklabel *)bp->b_data;
dlp <= (struct disklabel *)
((char *)bp->b_data + lp->d_secsize - sizeof(*dlp));
dlp = (struct disklabel *)((char *)dlp + sizeof(long))) {
if (dlp->d_magic == DISKMAGIC && dlp->d_magic2 == DISKMAGIC &&
dkcksum(dlp) == 0) {
*dlp = *lp;
bp->b_flags &= ~(B_DONE | B_READ);
bp->b_flags |= B_BUSY | B_WRITE;
#ifdef __alpha__
alpha_fix_srm_checksum(bp);
#endif
(*strat)(bp);
error = biowait(bp);
goto done;
}
}
error = ESRCH;
done:
#else
bzero(bp->b_data, lp->d_secsize);
dlp = (struct disklabel *)bp->b_data;
*dlp = *lp;
bp->b_flags &= ~B_INVAL;
bp->b_flags |= B_BUSY | B_WRITE;
(*strat)(bp);
error = biowait(bp);
#endif
bp->b_flags |= B_INVAL | B_AGE;
brelse(bp);
return (error);
}
/*
* Compute checksum for disk label.
*/
u_int
dkcksum(lp)
register struct disklabel *lp;
{
register u_short *start, *end;
register u_short sum = 0;
start = (u_short *)lp;
end = (u_short *)&lp->d_partitions[lp->d_npartitions];
while (start < end)
sum ^= *start++;
return (sum);
}
/*
* Disk error is the preface to plaintive error messages
* about failing disk transfers. It prints messages of the form
hp0g: hard error reading fsbn 12345 of 12344-12347 (hp0 bn %d cn %d tn %d sn %d)
* if the offset of the error in the transfer and a disk label
* are both available. blkdone should be -1 if the position of the error
* is unknown; the disklabel pointer may be null from drivers that have not
* been converted to use them. The message is printed with printf
* if pri is LOG_PRINTF, otherwise it uses log at the specified priority.
* The message should be completed (with at least a newline) with printf
* or addlog, respectively. There is no trailing space.
*/
void
diskerr(bp, dname, what, pri, blkdone, lp)
register struct buf *bp;
char *dname, *what;
int pri, blkdone;
register struct disklabel *lp;
{
int unit = dkunit(bp->b_dev);
int slice = dkslice(bp->b_dev);
int part = dkpart(bp->b_dev);
register int (*pr) __P((const char *, ...));
char partname[2];
char *sname;
daddr_t sn;
if (pri != LOG_PRINTF) {
log(pri, "");
pr = addlog;
} else
pr = printf;
sname = dsname(dname, unit, slice, part, partname);
(*pr)("%s%s: %s %sing fsbn ", sname, partname, what,
bp->b_flags & B_READ ? "read" : "writ");
sn = bp->b_blkno;
if (bp->b_bcount <= DEV_BSIZE)
(*pr)("%ld", (long)sn);
else {
if (blkdone >= 0) {
sn += blkdone;
(*pr)("%ld of ", (long)sn);
}
(*pr)("%ld-%ld", (long)bp->b_blkno,
(long)(bp->b_blkno + (bp->b_bcount - 1) / DEV_BSIZE));
}
if (lp && (blkdone >= 0 || bp->b_bcount <= lp->d_secsize)) {
#ifdef tahoe
sn *= DEV_BSIZE / lp->d_secsize; /* XXX */
#endif
sn += lp->d_partitions[part].p_offset;
/*
* XXX should add slice offset and not print the slice,
* but we don't know the slice pointer.
* XXX should print bp->b_pblkno so that this will work
* independent of slices, labels and bad sector remapping,
* but some drivers don't set bp->b_pblkno.
*/
(*pr)(" (%s bn %ld; cn %ld", sname, (long)sn,
(long)(sn / lp->d_secpercyl));
sn %= (long)lp->d_secpercyl;
(*pr)(" tn %ld sn %ld)", (long)(sn / lp->d_nsectors),
(long)(sn % lp->d_nsectors));
}
}