1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-25 11:37:56 +00:00
freebsd/lib/libstand/if_ether.h
Jake Burkholder e39756439c Back out the previous change to the queue(3) interface.
It was not discussed and should probably not happen.

Requested by:		msmith and others
2000-05-26 02:09:24 +00:00

266 lines
9.0 KiB
C

/* $NetBSD: if_ether.h,v 1.25 1997/01/17 17:06:06 mikel Exp $ */
/*
* Copyright (c) 1982, 1986, 1993
* The Regents of the University of California. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the University of
* California, Berkeley and its contributors.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @(#)if_ether.h 8.1 (Berkeley) 6/10/93
*
* $FreeBSD$
*/
/*
* Ethernet address - 6 octets
* this is only used by the ethers(3) functions.
*/
struct ether_addr {
u_int8_t ether_addr_octet[6];
};
/*
* Structure of a 10Mb/s Ethernet header.
*/
#define ETHER_ADDR_LEN 6
struct ether_header {
u_int8_t ether_dhost[ETHER_ADDR_LEN];
u_int8_t ether_shost[ETHER_ADDR_LEN];
u_int16_t ether_type;
};
#define ETHERTYPE_PUP 0x0200 /* PUP protocol */
#define ETHERTYPE_IP 0x0800 /* IP protocol */
#define ETHERTYPE_ARP 0x0806 /* address resolution protocol */
#define ETHERTYPE_REVARP 0x8035 /* reverse addr resolution protocol */
/*
* The ETHERTYPE_NTRAILER packet types starting at ETHERTYPE_TRAIL have
* (type-ETHERTYPE_TRAIL)*512 bytes of data followed
* by an ETHER type (as given above) and then the (variable-length) header.
*/
#define ETHERTYPE_TRAIL 0x1000 /* Trailer packet */
#define ETHERTYPE_NTRAILER 16
#define ETHER_IS_MULTICAST(addr) (*(addr) & 0x01) /* is address mcast/bcast? */
#define ETHERMTU 1500
#define ETHERMIN (60-14)
#ifdef _KERNEL
/*
* Macro to map an IP multicast address to an Ethernet multicast address.
* The high-order 25 bits of the Ethernet address are statically assigned,
* and the low-order 23 bits are taken from the low end of the IP address.
*/
#define ETHER_MAP_IP_MULTICAST(ipaddr, enaddr) \
/* struct in_addr *ipaddr; */ \
/* u_int8_t enaddr[ETHER_ADDR_LEN]; */ \
{ \
(enaddr)[0] = 0x01; \
(enaddr)[1] = 0x00; \
(enaddr)[2] = 0x5e; \
(enaddr)[3] = ((u_int8_t *)ipaddr)[1] & 0x7f; \
(enaddr)[4] = ((u_int8_t *)ipaddr)[2]; \
(enaddr)[5] = ((u_int8_t *)ipaddr)[3]; \
}
#endif
/*
* Ethernet Address Resolution Protocol.
*
* See RFC 826 for protocol description. Structure below is adapted
* to resolving internet addresses. Field names used correspond to
* RFC 826.
*/
struct ether_arp {
struct arphdr ea_hdr; /* fixed-size header */
u_int8_t arp_sha[ETHER_ADDR_LEN]; /* sender hardware address */
u_int8_t arp_spa[4]; /* sender protocol address */
u_int8_t arp_tha[ETHER_ADDR_LEN]; /* target hardware address */
u_int8_t arp_tpa[4]; /* target protocol address */
};
#define arp_hrd ea_hdr.ar_hrd
#define arp_pro ea_hdr.ar_pro
#define arp_hln ea_hdr.ar_hln
#define arp_pln ea_hdr.ar_pln
#define arp_op ea_hdr.ar_op
/*
* Structure shared between the ethernet driver modules and
* the address resolution code. For example, each ec_softc or il_softc
* begins with this structure.
*/
struct arpcom {
struct ifnet ac_if; /* network-visible interface */
u_int8_t ac_enaddr[ETHER_ADDR_LEN]; /* ethernet hardware address */
char ac__pad[2]; /* be nice to m68k ports */
LIST_HEAD(, ether_multi) ac_multiaddrs; /* list of ether multicast addrs */
int ac_multicnt; /* length of ac_multiaddrs list */
};
struct llinfo_arp {
LIST_ENTRY(llinfo_arp) la_list;
struct rtentry *la_rt;
struct mbuf *la_hold; /* last packet until resolved/timeout */
long la_asked; /* last time we QUERIED for this addr */
#define la_timer la_rt->rt_rmx.rmx_expire /* deletion time in seconds */
};
struct sockaddr_inarp {
u_int8_t sin_len;
u_int8_t sin_family;
u_int16_t sin_port;
struct in_addr sin_addr;
struct in_addr sin_srcaddr;
u_int16_t sin_tos;
u_int16_t sin_other;
#define SIN_PROXY 1
};
/*
* IP and ethernet specific routing flags
*/
#define RTF_USETRAILERS RTF_PROTO1 /* use trailers */
#define RTF_ANNOUNCE RTF_PROTO2 /* announce new arp entry */
#ifdef _KERNEL
u_int8_t etherbroadcastaddr[ETHER_ADDR_LEN];
u_int8_t ether_ipmulticast_min[ETHER_ADDR_LEN];
u_int8_t ether_ipmulticast_max[ETHER_ADDR_LEN];
struct ifqueue arpintrq;
void arpwhohas(struct arpcom *, struct in_addr *);
void arpintr(void);
int arpresolve(struct arpcom *,
struct rtentry *, struct mbuf *, struct sockaddr *, u_char *);
void arp_ifinit(struct arpcom *, struct ifaddr *);
void arp_rtrequest(int, struct rtentry *, struct sockaddr *);
int ether_addmulti(struct ifreq *, struct arpcom *);
int ether_delmulti(struct ifreq *, struct arpcom *);
#endif /* _KERNEL */
/*
* Ethernet multicast address structure. There is one of these for each
* multicast address or range of multicast addresses that we are supposed
* to listen to on a particular interface. They are kept in a linked list,
* rooted in the interface's arpcom structure. (This really has nothing to
* do with ARP, or with the Internet address family, but this appears to be
* the minimally-disrupting place to put it.)
*/
struct ether_multi {
u_int8_t enm_addrlo[ETHER_ADDR_LEN]; /* low or only address of range */
u_int8_t enm_addrhi[ETHER_ADDR_LEN]; /* high or only address of range */
struct arpcom *enm_ac; /* back pointer to arpcom */
u_int enm_refcount; /* no. claims to this addr/range */
LIST_ENTRY(ether_multi) enm_list;
};
/*
* Structure used by macros below to remember position when stepping through
* all of the ether_multi records.
*/
struct ether_multistep {
struct ether_multi *e_enm;
};
/*
* Macro for looking up the ether_multi record for a given range of Ethernet
* multicast addresses connected to a given arpcom structure. If no matching
* record is found, "enm" returns NULL.
*/
#define ETHER_LOOKUP_MULTI(addrlo, addrhi, ac, enm) \
/* u_int8_t addrlo[ETHER_ADDR_LEN]; */ \
/* u_int8_t addrhi[ETHER_ADDR_LEN]; */ \
/* struct arpcom *ac; */ \
/* struct ether_multi *enm; */ \
{ \
for ((enm) = (ac)->ac_multiaddrs.lh_first; \
(enm) != NULL && \
(bcmp((enm)->enm_addrlo, (addrlo), ETHER_ADDR_LEN) != 0 || \
bcmp((enm)->enm_addrhi, (addrhi), ETHER_ADDR_LEN) != 0); \
(enm) = (enm)->enm_list.le_next); \
}
/*
* Macro to step through all of the ether_multi records, one at a time.
* The current position is remembered in "step", which the caller must
* provide. ETHER_FIRST_MULTI(), below, must be called to initialize "step"
* and get the first record. Both macros return a NULL "enm" when there
* are no remaining records.
*/
#define ETHER_NEXT_MULTI(step, enm) \
/* struct ether_multistep step; */ \
/* struct ether_multi *enm; */ \
{ \
if (((enm) = (step).e_enm) != NULL) \
(step).e_enm = (enm)->enm_list.le_next; \
}
#define ETHER_FIRST_MULTI(step, ac, enm) \
/* struct ether_multistep step; */ \
/* struct arpcom *ac; */ \
/* struct ether_multi *enm; */ \
{ \
(step).e_enm = (ac)->ac_multiaddrs.lh_first; \
ETHER_NEXT_MULTI((step), (enm)); \
}
#ifdef _KERNEL
void arp_rtrequest(int, struct rtentry *, struct sockaddr *);
int arpresolve(struct arpcom *, struct rtentry *, struct mbuf *,
struct sockaddr *, u_char *);
void arpintr(void);
int arpioctl(u_long, caddr_t);
void arp_ifinit(struct arpcom *, struct ifaddr *);
void revarpinput(struct mbuf *);
void in_revarpinput(struct mbuf *);
void revarprequest(struct ifnet *);
int revarpwhoarewe(struct ifnet *, struct in_addr *, struct in_addr *);
int revarpwhoami(struct in_addr *, struct ifnet *);
int db_show_arptab(void);
#endif
/*
* Prototype ethers(3) functions.
*/
#ifndef _KERNEL
#include <sys/cdefs.h>
__BEGIN_DECLS
char * ether_ntoa(struct ether_addr *);
struct ether_addr *
ether_aton(char *);
int ether_ntohost(char *, struct ether_addr *);
int ether_hostton(char *, struct ether_addr *);
int ether_line(char *, struct ether_addr *, char *);
__END_DECLS
#endif