mirror of
https://git.FreeBSD.org/src.git
synced 2024-12-19 10:53:58 +00:00
1002 lines
30 KiB
C
1002 lines
30 KiB
C
/*-
|
|
* Copyright (c) 1998,1999,2000,2001 Søren Schmidt <sos@FreeBSD.org>
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer,
|
|
* without modification, immediately at the beginning of the file.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
#include "opt_global.h"
|
|
#include "opt_ata.h"
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/ata.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/bio.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/conf.h>
|
|
#include <sys/disk.h>
|
|
#include <sys/devicestat.h>
|
|
#include <sys/cons.h>
|
|
#include <sys/sysctl.h>
|
|
#include <vm/vm.h>
|
|
#include <vm/pmap.h>
|
|
#include <machine/md_var.h>
|
|
#include <machine/bus.h>
|
|
#include <sys/rman.h>
|
|
#include <dev/ata/ata-all.h>
|
|
#include <dev/ata/ata-disk.h>
|
|
#include <dev/ata/ata-raid.h>
|
|
|
|
/* device structures */
|
|
static d_open_t adopen;
|
|
static d_close_t adclose;
|
|
static d_strategy_t adstrategy;
|
|
static d_dump_t addump;
|
|
static struct cdevsw ad_cdevsw = {
|
|
/* open */ adopen,
|
|
/* close */ adclose,
|
|
/* read */ physread,
|
|
/* write */ physwrite,
|
|
/* ioctl */ noioctl,
|
|
/* poll */ nopoll,
|
|
/* mmap */ nommap,
|
|
/* strategy */ adstrategy,
|
|
/* name */ "ad",
|
|
/* maj */ 116,
|
|
/* dump */ addump,
|
|
/* psize */ nopsize,
|
|
/* flags */ D_DISK,
|
|
};
|
|
static struct cdevsw addisk_cdevsw;
|
|
|
|
/* prototypes */
|
|
static void ad_invalidatequeue(struct ad_softc *, struct ad_request *);
|
|
static int ad_tagsupported(struct ad_softc *);
|
|
static void ad_timeout(struct ad_request *);
|
|
static void ad_free(struct ad_request *);
|
|
static int ad_version(u_int16_t);
|
|
|
|
/* internal vars */
|
|
static u_int32_t adp_lun_map = 0;
|
|
static MALLOC_DEFINE(M_AD, "AD driver", "ATA disk driver");
|
|
static int ata_dma = 1;
|
|
static int ata_wc = 0;
|
|
static int ata_tags = 0;
|
|
TUNABLE_INT("hw.ata.ata_dma", &ata_dma);
|
|
TUNABLE_INT("hw.ata.wc", &ata_wc);
|
|
TUNABLE_INT("hw.ata.tags", &ata_tags);
|
|
|
|
/* sysctl vars */
|
|
SYSCTL_DECL(_hw_ata);
|
|
SYSCTL_INT(_hw_ata, OID_AUTO, ata_dma, CTLFLAG_RD, &ata_dma, 0,
|
|
"ATA disk DMA mode control");
|
|
SYSCTL_INT(_hw_ata, OID_AUTO, wc, CTLFLAG_RD, &ata_wc, 0,
|
|
"ATA disk write caching");
|
|
SYSCTL_INT(_hw_ata, OID_AUTO, tags, CTLFLAG_RD, &ata_tags, 0,
|
|
"ATA disk tagged queuing support");
|
|
|
|
/* defines */
|
|
#define AD_MAX_RETRIES 3
|
|
#define AD_PARAM ATA_PARAM(adp->controller, adp->unit)
|
|
|
|
/* experimental cache flush on BIO_ORDERED */
|
|
#undef ATA_FLUSHCACHE_ON
|
|
|
|
void
|
|
ad_attach(struct ata_softc *scp, int device)
|
|
{
|
|
struct ad_softc *adp;
|
|
dev_t dev;
|
|
|
|
if (!(adp = malloc(sizeof(struct ad_softc), M_AD, M_NOWAIT | M_ZERO))) {
|
|
ata_printf(scp, device, "failed to allocate driver storage\n");
|
|
return;
|
|
}
|
|
adp->controller = scp;
|
|
adp->unit = device;
|
|
#ifdef ATA_STATIC_ID
|
|
adp->lun = (device_get_unit(scp->dev) << 1) + ATA_DEV(device);
|
|
#else
|
|
adp->lun = ata_get_lun(&adp_lun_map);
|
|
#endif
|
|
ata_set_name(scp, device, "ad", adp->lun);
|
|
adp->heads = AD_PARAM->heads;
|
|
adp->sectors = AD_PARAM->sectors;
|
|
adp->total_secs = AD_PARAM->cylinders * adp->heads * adp->sectors;
|
|
|
|
/* does this device need oldstyle CHS addressing */
|
|
if (!ad_version(AD_PARAM->version_major) ||
|
|
!(AD_PARAM->atavalid & ATA_FLAG_54_58) || !AD_PARAM->lba_size)
|
|
adp->flags |= AD_F_CHS_USED;
|
|
|
|
/* use the 28bit LBA size if valid */
|
|
if (AD_PARAM->cylinders == 16383 && adp->total_secs < AD_PARAM->lba_size)
|
|
adp->total_secs = AD_PARAM->lba_size;
|
|
|
|
/* use the 48bit LBA size if valid */
|
|
if (AD_PARAM->support.address48)
|
|
adp->total_secs = AD_PARAM->lba_size48;
|
|
|
|
/* use multiple sectors/interrupt if device supports it */
|
|
adp->transfersize = DEV_BSIZE;
|
|
if (ad_version(AD_PARAM->version_major)) {
|
|
int secsperint = max(1, min(AD_PARAM->sectors_intr, 16));
|
|
|
|
if (!ata_command(adp->controller, adp->unit, ATA_C_SET_MULTI,
|
|
0, secsperint, 0, ATA_WAIT_INTR) &&
|
|
!ata_wait(adp->controller, adp->unit, 0))
|
|
adp->transfersize *= secsperint;
|
|
}
|
|
|
|
/* enable read cacheing if not default on device */
|
|
if (ata_command(adp->controller, adp->unit, ATA_C_SETFEATURES,
|
|
0, 0, ATA_C_F_ENAB_RCACHE, ATA_WAIT_INTR))
|
|
ata_printf(scp, device, "enabling readahead cache failed\n");
|
|
|
|
/* enable write cacheing if allowed and not default on device */
|
|
if (ata_wc || ata_tags) {
|
|
if (ata_command(adp->controller, adp->unit, ATA_C_SETFEATURES,
|
|
0, 0, ATA_C_F_ENAB_WCACHE, ATA_WAIT_INTR))
|
|
ata_printf(scp, device, "enabling write cache failed\n");
|
|
}
|
|
else {
|
|
if (ata_command(adp->controller, adp->unit, ATA_C_SETFEATURES,
|
|
0, 0, ATA_C_F_DIS_WCACHE, ATA_WAIT_INTR))
|
|
ata_printf(scp, device, "disabling write cache failed\n");
|
|
}
|
|
|
|
/* use DMA if allowed and if drive/controller supports it */
|
|
if (ata_dma)
|
|
ata_dmainit(adp->controller, adp->unit, ata_pmode(AD_PARAM),
|
|
ata_wmode(AD_PARAM), ata_umode(AD_PARAM));
|
|
else
|
|
ata_dmainit(adp->controller, adp->unit, ata_pmode(AD_PARAM), -1, -1);
|
|
|
|
/* use tagged queueing if allowed and supported */
|
|
if (ata_tags && ad_tagsupported(adp)) {
|
|
adp->num_tags = AD_PARAM->queuelen;
|
|
adp->flags |= AD_F_TAG_ENABLED;
|
|
adp->controller->flags |= ATA_QUEUED;
|
|
if (ata_command(adp->controller, adp->unit, ATA_C_SETFEATURES,
|
|
0, 0, ATA_C_F_DIS_RELIRQ, ATA_WAIT_INTR))
|
|
ata_printf(scp, device, "disabling release interrupt failed\n");
|
|
if (ata_command(adp->controller, adp->unit, ATA_C_SETFEATURES,
|
|
0, 0, ATA_C_F_DIS_SRVIRQ, ATA_WAIT_INTR))
|
|
ata_printf(scp, device, "disabling service interrupt failed\n");
|
|
}
|
|
|
|
devstat_add_entry(&adp->stats, "ad", adp->lun, DEV_BSIZE,
|
|
DEVSTAT_NO_ORDERED_TAGS,
|
|
DEVSTAT_TYPE_DIRECT | DEVSTAT_TYPE_IF_IDE,
|
|
DEVSTAT_PRIORITY_DISK);
|
|
|
|
dev = disk_create(adp->lun, &adp->disk, 0, &ad_cdevsw, &addisk_cdevsw);
|
|
dev->si_drv1 = adp;
|
|
dev->si_iosize_max = 256 * DEV_BSIZE;
|
|
adp->dev = dev;
|
|
bioq_init(&adp->queue);
|
|
|
|
/* if this disk belongs to an ATA RAID dont print the probe */
|
|
if (!ar_probe(adp))
|
|
adp->flags |= AD_F_RAID_SUBDISK;
|
|
else
|
|
ad_print(adp, "");
|
|
|
|
/* construct the disklabel */
|
|
bzero(&adp->disk.d_label, sizeof(struct disklabel));
|
|
adp->disk.d_label.d_secsize = DEV_BSIZE;
|
|
adp->disk.d_label.d_nsectors = adp->sectors;
|
|
adp->disk.d_label.d_ntracks = adp->heads;
|
|
adp->disk.d_label.d_ncylinders = adp->total_secs/(adp->heads*adp->sectors);
|
|
adp->disk.d_label.d_secpercyl = adp->sectors * adp->heads;
|
|
adp->disk.d_label.d_secperunit = adp->total_secs;
|
|
|
|
/* store our softc signalling we are ready to go */
|
|
scp->dev_softc[ATA_DEV(device)] = adp;
|
|
}
|
|
|
|
void
|
|
ad_detach(struct ad_softc *adp, int flush)
|
|
{
|
|
struct ad_request *request;
|
|
struct bio *bp;
|
|
|
|
adp->flags |= AD_F_DETACHING;
|
|
|
|
if (adp->flags & AD_F_RAID_SUBDISK)
|
|
printf("WARNING! detaching RAID subdisk, danger ahead\n");
|
|
|
|
ata_printf(adp->controller, adp->unit, "removed from configuration\n");
|
|
ad_invalidatequeue(adp, NULL);
|
|
TAILQ_FOREACH(request, &adp->controller->ata_queue, chain) {
|
|
if (request->device != adp)
|
|
continue;
|
|
TAILQ_REMOVE(&adp->controller->ata_queue, request, chain);
|
|
biofinish(request->bp, NULL, ENXIO);
|
|
ad_free(request);
|
|
}
|
|
while ((bp = bioq_first(&adp->queue))) {
|
|
biofinish(bp, NULL, ENXIO);
|
|
}
|
|
disk_invalidate(&adp->disk);
|
|
disk_destroy(adp->dev);
|
|
devstat_remove_entry(&adp->stats);
|
|
if (flush) {
|
|
if (ata_command(adp->controller, adp->unit, ATA_C_FLUSHCACHE,
|
|
0, 0, 0, ATA_WAIT_READY))
|
|
ata_printf(adp->controller, adp->unit,
|
|
"flushing cache on detach failed\n");
|
|
}
|
|
ata_free_lun(&adp_lun_map, adp->lun);
|
|
adp->controller->dev_softc[ATA_DEV(adp->unit)] = NULL;
|
|
free(adp, M_AD);
|
|
}
|
|
|
|
static int
|
|
adopen(dev_t dev, int flags, int fmt, struct thread *td)
|
|
{
|
|
struct ad_softc *adp = dev->si_drv1;
|
|
|
|
if (adp->flags & AD_F_RAID_SUBDISK)
|
|
return EBUSY;
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
adclose(dev_t dev, int flags, int fmt, struct thread *td)
|
|
{
|
|
struct ad_softc *adp = dev->si_drv1;
|
|
|
|
if (ata_command(adp->controller, adp->unit, ATA_C_FLUSHCACHE,
|
|
0, 0, 0, ATA_WAIT_READY))
|
|
ata_printf(adp->controller, adp->unit,
|
|
"flushing cache on close failed\n");
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
adstrategy(struct bio *bp)
|
|
{
|
|
struct ad_softc *adp = bp->bio_dev->si_drv1;
|
|
int s;
|
|
|
|
if (adp->flags & AD_F_DETACHING) {
|
|
biofinish(bp, NULL, ENXIO);
|
|
return;
|
|
}
|
|
|
|
s = splbio();
|
|
bioqdisksort(&adp->queue, bp);
|
|
ata_start(adp->controller);
|
|
splx(s);
|
|
}
|
|
|
|
int
|
|
addump(dev_t dev)
|
|
{
|
|
struct ad_softc *adp = dev->si_drv1;
|
|
struct ad_request request;
|
|
u_int count, blkno, secsize;
|
|
vm_offset_t addr = 0;
|
|
long blkcnt;
|
|
int dumppages = MAXDUMPPGS;
|
|
int error;
|
|
int i;
|
|
|
|
if ((error = disk_dumpcheck(dev, &count, &blkno, &secsize)))
|
|
return error;
|
|
|
|
if (!adp)
|
|
return ENXIO;
|
|
|
|
/* force PIO mode for dumps */
|
|
adp->controller->mode[ATA_DEV(adp->unit)] = ATA_PIO;
|
|
ata_reinit(adp->controller);
|
|
|
|
blkcnt = howmany(PAGE_SIZE, secsize);
|
|
|
|
while (count > 0) {
|
|
caddr_t va = NULL;
|
|
DELAY(1000);
|
|
|
|
if ((count / blkcnt) < dumppages)
|
|
dumppages = count / blkcnt;
|
|
|
|
for (i = 0; i < dumppages; ++i) {
|
|
vm_offset_t a = addr + (i * PAGE_SIZE);
|
|
if (is_physical_memory(a))
|
|
va = pmap_kenter_temporary(trunc_page(a), i);
|
|
else
|
|
va = pmap_kenter_temporary(trunc_page(0), i);
|
|
}
|
|
|
|
bzero(&request, sizeof(struct ad_request));
|
|
request.device = adp;
|
|
request.blockaddr = blkno;
|
|
request.bytecount = PAGE_SIZE * dumppages;
|
|
request.data = va;
|
|
|
|
while (request.bytecount > 0) {
|
|
ad_transfer(&request);
|
|
if (request.flags & ADR_F_ERROR)
|
|
return EIO;
|
|
request.donecount += request.currentsize;
|
|
request.bytecount -= request.currentsize;
|
|
DELAY(20);
|
|
}
|
|
|
|
if (dumpstatus(addr, (long)(count * DEV_BSIZE)) < 0)
|
|
return EINTR;
|
|
|
|
blkno += blkcnt * dumppages;
|
|
count -= blkcnt * dumppages;
|
|
addr += PAGE_SIZE * dumppages;
|
|
}
|
|
|
|
if (ata_wait(adp->controller, adp->unit, ATA_S_READY | ATA_S_DSC) < 0)
|
|
ata_printf(adp->controller, adp->unit,
|
|
"timeout waiting for final ready\n");
|
|
return 0;
|
|
}
|
|
|
|
void
|
|
ad_start(struct ad_softc *adp)
|
|
{
|
|
struct bio *bp = bioq_first(&adp->queue);
|
|
struct ad_request *request;
|
|
int tag = 0;
|
|
|
|
if (!bp)
|
|
return;
|
|
|
|
#ifdef ATA_FLUSHCACHE_ON
|
|
/*
|
|
* if BIO_ORDERED is set cache should be flushed, if there are
|
|
* any outstanding requests, hold off and wait for them to finish
|
|
*/
|
|
if (adp->flags & AD_F_TAG_ENABLED &&
|
|
bp->bio_flags & BIO_ORDERED && adp->outstanding > 0)
|
|
return;
|
|
#endif
|
|
|
|
/* if tagged queueing enabled get next free tag */
|
|
if (adp->flags & AD_F_TAG_ENABLED) {
|
|
while (tag <= adp->num_tags && adp->tags[tag])
|
|
tag++;
|
|
if (tag > adp->num_tags )
|
|
return;
|
|
}
|
|
|
|
if (!(request = malloc(sizeof(struct ad_request), M_AD, M_NOWAIT|M_ZERO))) {
|
|
ata_printf(adp->controller, adp->unit, "out of memory in start\n");
|
|
return;
|
|
}
|
|
|
|
/* setup request */
|
|
request->device = adp;
|
|
request->bp = bp;
|
|
request->blockaddr = bp->bio_pblkno;
|
|
request->bytecount = bp->bio_bcount;
|
|
request->data = bp->bio_data;
|
|
request->tag = tag;
|
|
if (bp->bio_cmd == BIO_READ)
|
|
request->flags |= ADR_F_READ;
|
|
if (adp->controller->mode[ATA_DEV(adp->unit)] >= ATA_DMA) {
|
|
if (!(request->dmatab = ata_dmaalloc(adp->controller, adp->unit)))
|
|
adp->controller->mode[ATA_DEV(adp->unit)] = ATA_PIO;
|
|
}
|
|
|
|
/* insert in tag array */
|
|
adp->tags[tag] = request;
|
|
|
|
/* remove from drive queue */
|
|
bioq_remove(&adp->queue, bp);
|
|
|
|
/* link onto controller queue */
|
|
TAILQ_INSERT_TAIL(&adp->controller->ata_queue, request, chain);
|
|
}
|
|
|
|
int
|
|
ad_transfer(struct ad_request *request)
|
|
{
|
|
struct ad_softc *adp;
|
|
u_int64_t lba;
|
|
u_int32_t count, max_count;
|
|
u_int8_t cmd;
|
|
int flags = ATA_IMMEDIATE;
|
|
|
|
/* get request params */
|
|
adp = request->device;
|
|
|
|
/* calculate transfer details */
|
|
lba = request->blockaddr + (request->donecount / DEV_BSIZE);
|
|
|
|
if (request->donecount == 0) {
|
|
|
|
/* start timeout for this transfer */
|
|
if (dumping)
|
|
request->timeout_handle.callout = NULL;
|
|
else
|
|
request->timeout_handle =
|
|
timeout((timeout_t*)ad_timeout, request, 10 * hz);
|
|
|
|
/* setup transfer parameters !! 65536 for 48bit SOS XXX */
|
|
count = howmany(request->bytecount, DEV_BSIZE);
|
|
max_count = AD_PARAM->support.address48 ? 65536 : 256;
|
|
if (count > max_count) {
|
|
ata_printf(adp->controller, adp->unit,
|
|
"count %d size transfers not supported\n", count);
|
|
count = max_count;
|
|
}
|
|
|
|
if (adp->flags & AD_F_CHS_USED) {
|
|
int sector = (lba % adp->sectors) + 1;
|
|
int cylinder = lba / (adp->sectors * adp->heads);
|
|
int head = (lba % (adp->sectors * adp->heads)) / adp->sectors;
|
|
|
|
lba = (sector&0xff) | ((cylinder&0xffff)<<8) | ((head&0xf)<<24);
|
|
flags |= ATA_USE_CHS;
|
|
}
|
|
|
|
/* setup first transfer length */
|
|
request->currentsize = min(request->bytecount, adp->transfersize);
|
|
|
|
devstat_start_transaction(&adp->stats);
|
|
|
|
/* does this drive & transfer work with DMA ? */
|
|
request->flags &= ~ADR_F_DMA_USED;
|
|
if (adp->controller->mode[ATA_DEV(adp->unit)] >= ATA_DMA &&
|
|
!ata_dmasetup(adp->controller, adp->unit, request->dmatab,
|
|
request->data, request->bytecount)) {
|
|
request->flags |= ADR_F_DMA_USED;
|
|
request->currentsize = request->bytecount;
|
|
|
|
/* do we have tags enabled ? */
|
|
if (adp->flags & AD_F_TAG_ENABLED) {
|
|
cmd = (request->flags & ADR_F_READ) ?
|
|
ATA_C_READ_DMA_QUEUED : ATA_C_WRITE_DMA_QUEUED;
|
|
|
|
if (ata_command(adp->controller, adp->unit, cmd, lba,
|
|
request->tag << 3, count, flags)) {
|
|
ata_printf(adp->controller, adp->unit,
|
|
"error executing command");
|
|
goto transfer_failed;
|
|
}
|
|
if (ata_wait(adp->controller, adp->unit, ATA_S_READY)) {
|
|
ata_printf(adp->controller, adp->unit,
|
|
"timeout waiting for READY\n");
|
|
goto transfer_failed;
|
|
}
|
|
adp->outstanding++;
|
|
|
|
/* if ATA bus RELEASE check for SERVICE */
|
|
if (adp->flags & AD_F_TAG_ENABLED &&
|
|
ATA_INB(adp->controller->r_io, ATA_IREASON) & ATA_I_RELEASE)
|
|
return ad_service(adp, 1);
|
|
}
|
|
else {
|
|
cmd = (request->flags & ADR_F_READ) ?
|
|
ATA_C_READ_DMA : ATA_C_WRITE_DMA;
|
|
|
|
if (ata_command(adp->controller, adp->unit,
|
|
cmd, lba, count, 0, flags)) {
|
|
ata_printf(adp->controller, adp->unit,
|
|
"error executing command");
|
|
goto transfer_failed;
|
|
}
|
|
#if 0
|
|
/*
|
|
* wait for data transfer phase
|
|
*
|
|
* well this should be here acording to specs, but
|
|
* promise controllers doesn't like it, they lockup!
|
|
* thats probably why tags doesn't work on the promise
|
|
* as this is needed there...
|
|
*/
|
|
if (ata_wait(adp->controller, adp->unit,
|
|
ATA_S_READY | ATA_S_DRQ)) {
|
|
ata_printf(adp->controller, adp->unit,
|
|
"timeout waiting for data phase\n");
|
|
goto transfer_failed;
|
|
}
|
|
#endif
|
|
}
|
|
|
|
/* start transfer, return and wait for interrupt */
|
|
ata_dmastart(adp->controller, adp->unit,
|
|
request->dmatab, request->flags & ADR_F_READ);
|
|
return ATA_OP_CONTINUES;
|
|
}
|
|
|
|
/* does this drive support multi sector transfers ? */
|
|
if (request->currentsize > DEV_BSIZE)
|
|
cmd = request->flags&ADR_F_READ ? ATA_C_READ_MUL : ATA_C_WRITE_MUL;
|
|
|
|
/* just plain old single sector transfer */
|
|
else
|
|
cmd = request->flags&ADR_F_READ ? ATA_C_READ : ATA_C_WRITE;
|
|
|
|
if (ata_command(adp->controller, adp->unit, cmd, lba, count, 0, flags)){
|
|
ata_printf(adp->controller, adp->unit, "error executing command");
|
|
goto transfer_failed;
|
|
}
|
|
}
|
|
|
|
/* calculate this transfer length */
|
|
request->currentsize = min(request->bytecount, adp->transfersize);
|
|
|
|
/* if this is a PIO read operation, return and wait for interrupt */
|
|
if (request->flags & ADR_F_READ)
|
|
return ATA_OP_CONTINUES;
|
|
|
|
/* ready to write PIO data ? */
|
|
if (ata_wait(adp->controller, adp->unit,
|
|
(ATA_S_READY | ATA_S_DSC | ATA_S_DRQ)) < 0) {
|
|
ata_printf(adp->controller, adp->unit, "timeout waiting for DRQ");
|
|
goto transfer_failed;
|
|
}
|
|
|
|
/* output the data */
|
|
if (adp->controller->flags & ATA_USE_16BIT)
|
|
ATA_OUTSW(adp->controller->r_io, ATA_DATA,
|
|
(void *)((uintptr_t)request->data + request->donecount),
|
|
request->currentsize / sizeof(int16_t));
|
|
else
|
|
ATA_OUTSL(adp->controller->r_io, ATA_DATA,
|
|
(void *)((uintptr_t)request->data + request->donecount),
|
|
request->currentsize / sizeof(int32_t));
|
|
return ATA_OP_CONTINUES;
|
|
|
|
transfer_failed:
|
|
untimeout((timeout_t *)ad_timeout, request, request->timeout_handle);
|
|
ad_invalidatequeue(adp, request);
|
|
printf(" - resetting\n");
|
|
|
|
/* if retries still permit, reinject this request */
|
|
if (request->retries++ < AD_MAX_RETRIES)
|
|
TAILQ_INSERT_HEAD(&adp->controller->ata_queue, request, chain);
|
|
else {
|
|
/* retries all used up, return error */
|
|
request->bp->bio_error = EIO;
|
|
request->bp->bio_flags |= BIO_ERROR;
|
|
request->bp->bio_resid = request->bytecount;
|
|
biofinish(request->bp, &adp->stats, 0);
|
|
ad_free(request);
|
|
}
|
|
ata_reinit(adp->controller);
|
|
return ATA_OP_CONTINUES;
|
|
}
|
|
|
|
int
|
|
ad_interrupt(struct ad_request *request)
|
|
{
|
|
struct ad_softc *adp = request->device;
|
|
int dma_stat = 0;
|
|
|
|
#ifdef ATA_FLUSHCACHE_ON
|
|
if (request->flags & ADR_F_FLUSHCACHE)
|
|
goto finish;
|
|
#endif
|
|
/* finish DMA transfer */
|
|
if (request->flags & ADR_F_DMA_USED)
|
|
dma_stat = ata_dmadone(adp->controller);
|
|
|
|
/* do we have a corrected soft error ? */
|
|
if (adp->controller->status & ATA_S_CORR)
|
|
diskerr(request->bp, "soft error (ECC corrected)",
|
|
request->blockaddr + (request->donecount / DEV_BSIZE),
|
|
&adp->disk.d_label);
|
|
|
|
/* did any real errors happen ? */
|
|
if ((adp->controller->status & ATA_S_ERROR) ||
|
|
(request->flags & ADR_F_DMA_USED && dma_stat & ATA_BMSTAT_ERROR)) {
|
|
adp->controller->error = ATA_INB(adp->controller->r_io, ATA_ERROR);
|
|
diskerr(request->bp,
|
|
(adp->controller->error & ATA_E_ICRC) ?
|
|
"UDMA ICRC error" : "hard error",
|
|
request->blockaddr + (request->donecount / DEV_BSIZE),
|
|
&adp->disk.d_label);
|
|
|
|
/* if this is a UDMA CRC error, reinject request */
|
|
if (request->flags & ADR_F_DMA_USED &&
|
|
adp->controller->error & ATA_E_ICRC) {
|
|
untimeout((timeout_t *)ad_timeout, request,request->timeout_handle);
|
|
ad_invalidatequeue(adp, request);
|
|
|
|
if (request->retries++ < AD_MAX_RETRIES)
|
|
printf(" retrying\n");
|
|
else {
|
|
ata_dmainit(adp->controller, adp->unit,
|
|
ata_pmode(AD_PARAM), -1, -1);
|
|
printf(" falling back to PIO mode\n");
|
|
}
|
|
TAILQ_INSERT_HEAD(&adp->controller->ata_queue, request, chain);
|
|
return ATA_OP_FINISHED;
|
|
}
|
|
|
|
/* if using DMA, try once again in PIO mode */
|
|
if (request->flags & ADR_F_DMA_USED) {
|
|
untimeout((timeout_t *)ad_timeout, request,request->timeout_handle);
|
|
ad_invalidatequeue(adp, request);
|
|
ata_dmainit(adp->controller, adp->unit,
|
|
ata_pmode(AD_PARAM), -1, -1);
|
|
request->flags |= ADR_F_FORCE_PIO;
|
|
TAILQ_INSERT_HEAD(&adp->controller->ata_queue, request, chain);
|
|
return ATA_OP_FINISHED;
|
|
}
|
|
|
|
request->flags |= ADR_F_ERROR;
|
|
printf(" status=%02x error=%02x\n",
|
|
adp->controller->status, adp->controller->error);
|
|
}
|
|
|
|
/* if we arrived here with forced PIO mode, DMA doesn't work right */
|
|
if (request->flags & ADR_F_FORCE_PIO)
|
|
ata_printf(adp->controller, adp->unit,
|
|
"DMA problem fallback to PIO mode\n");
|
|
|
|
/* if this was a PIO read operation, get the data */
|
|
if (!(request->flags & ADR_F_DMA_USED) &&
|
|
(request->flags & (ADR_F_READ | ADR_F_ERROR)) == ADR_F_READ) {
|
|
|
|
/* ready to receive data? */
|
|
if ((adp->controller->status & (ATA_S_READY | ATA_S_DSC | ATA_S_DRQ))
|
|
!= (ATA_S_READY | ATA_S_DSC | ATA_S_DRQ))
|
|
ata_printf(adp->controller, adp->unit,
|
|
"read interrupt arrived early");
|
|
|
|
if (ata_wait(adp->controller, adp->unit,
|
|
(ATA_S_READY | ATA_S_DSC | ATA_S_DRQ)) != 0) {
|
|
ata_printf(adp->controller, adp->unit,
|
|
"read error detected (too) late");
|
|
request->flags |= ADR_F_ERROR;
|
|
}
|
|
else {
|
|
/* data ready, read in */
|
|
if (adp->controller->flags & ATA_USE_16BIT)
|
|
ATA_INSW(adp->controller->r_io, ATA_DATA,
|
|
(void *)((uintptr_t)request->data + request->donecount),
|
|
request->currentsize / sizeof(int16_t));
|
|
else
|
|
ATA_INSL(adp->controller->r_io, ATA_DATA,
|
|
(void *)((uintptr_t)request->data + request->donecount),
|
|
request->currentsize / sizeof(int32_t));
|
|
}
|
|
}
|
|
|
|
/* finish up transfer */
|
|
if (request->flags & ADR_F_ERROR) {
|
|
request->bp->bio_error = EIO;
|
|
request->bp->bio_flags |= BIO_ERROR;
|
|
}
|
|
else {
|
|
request->bytecount -= request->currentsize;
|
|
request->donecount += request->currentsize;
|
|
if (request->bytecount > 0) {
|
|
ad_transfer(request);
|
|
return ATA_OP_CONTINUES;
|
|
}
|
|
}
|
|
|
|
/* disarm timeout for this transfer */
|
|
untimeout((timeout_t *)ad_timeout, request, request->timeout_handle);
|
|
|
|
request->bp->bio_resid = request->bytecount;
|
|
|
|
#ifdef ATA_FLUSHCACHE_ON
|
|
if (request->bp->bio_flags & BIO_ORDERED) {
|
|
request->flags |= ADR_F_FLUSHCACHE;
|
|
if (ata_command(adp->controller, adp->unit, ATA_C_FLUSHCACHE,
|
|
0, 0, 0, ATA_IMMEDIATE))
|
|
ata_printf(adp->controller, adp->unit, "flushing cache failed\n");
|
|
else
|
|
return ATA_OP_CONTINUES;
|
|
}
|
|
finish:
|
|
#endif
|
|
biofinish(request->bp, &adp->stats, 0);
|
|
ad_free(request);
|
|
adp->outstanding--;
|
|
|
|
/* check for SERVICE (tagged operations only) */
|
|
return ad_service(adp, 1);
|
|
}
|
|
|
|
int
|
|
ad_service(struct ad_softc *adp, int change)
|
|
{
|
|
/* do we have to check the other device on this channel ? */
|
|
if (adp->controller->flags & ATA_QUEUED && change) {
|
|
int device = adp->unit;
|
|
|
|
if (adp->unit == ATA_MASTER) {
|
|
if (adp->controller->devices & ATA_ATA_SLAVE &&
|
|
((struct ad_softc *)
|
|
(adp->controller->dev_softc[ATA_DEV(ATA_SLAVE)]))->flags &
|
|
AD_F_TAG_ENABLED)
|
|
device = ATA_SLAVE;
|
|
}
|
|
else {
|
|
if (adp->controller->devices & ATA_ATA_MASTER &&
|
|
((struct ad_softc *)
|
|
(adp->controller->dev_softc[ATA_DEV(ATA_MASTER)]))->flags &
|
|
AD_F_TAG_ENABLED)
|
|
device = ATA_MASTER;
|
|
}
|
|
if (device != adp->unit &&
|
|
((struct ad_softc *)
|
|
(adp->controller->dev_softc[ATA_DEV(device)]))->outstanding > 0) {
|
|
ATA_OUTB(adp->controller->r_io, ATA_DRIVE, ATA_D_IBM | device);
|
|
adp = adp->controller->dev_softc[ATA_DEV(device)];
|
|
DELAY(1);
|
|
}
|
|
}
|
|
adp->controller->status = ATA_INB(adp->controller->r_altio, ATA_ALTSTAT);
|
|
|
|
/* do we have a SERVICE request from the drive ? */
|
|
if (adp->flags & AD_F_TAG_ENABLED &&
|
|
adp->outstanding > 0 &&
|
|
adp->controller->status & ATA_S_SERVICE) {
|
|
struct ad_request *request;
|
|
int tag;
|
|
|
|
/* check for error */
|
|
if (adp->controller->status & ATA_S_ERROR) {
|
|
ata_printf(adp->controller, adp->unit,
|
|
"Oops! controller says s=0x%02x e=0x%02x\n",
|
|
adp->controller->status, adp->controller->error);
|
|
ad_invalidatequeue(adp, NULL);
|
|
return ATA_OP_FINISHED;
|
|
}
|
|
|
|
/* issue SERVICE cmd */
|
|
if (ata_command(adp->controller, adp->unit, ATA_C_SERVICE,
|
|
0, 0, 0, ATA_IMMEDIATE)) {
|
|
ata_printf(adp->controller, adp->unit,
|
|
"problem executing SERVICE cmd\n");
|
|
ad_invalidatequeue(adp, NULL);
|
|
return ATA_OP_FINISHED;
|
|
}
|
|
|
|
/* setup the transfer environment when ready */
|
|
if (ata_wait(adp->controller, adp->unit, ATA_S_READY)) {
|
|
ata_printf(adp->controller, adp->unit,
|
|
"problem issueing SERVICE tag=%d s=0x%02x e=0x%02x\n",
|
|
ATA_INB(adp->controller->r_io, ATA_COUNT) >> 3,
|
|
adp->controller->status, adp->controller->error);
|
|
ad_invalidatequeue(adp, NULL);
|
|
return ATA_OP_FINISHED;
|
|
}
|
|
tag = ATA_INB(adp->controller->r_io, ATA_COUNT) >> 3;
|
|
if (!(request = adp->tags[tag])) {
|
|
ata_printf(adp->controller, adp->unit,
|
|
"no request for tag=%d\n", tag);
|
|
ad_invalidatequeue(adp, NULL);
|
|
return ATA_OP_FINISHED;
|
|
}
|
|
adp->controller->active = ATA_ACTIVE_ATA;
|
|
adp->controller->running = request;
|
|
request->serv++;
|
|
|
|
/* start DMA transfer when ready */
|
|
if (ata_wait(adp->controller, adp->unit, ATA_S_READY | ATA_S_DRQ)) {
|
|
ata_printf(adp->controller, adp->unit,
|
|
"timeout waiting for data phase s=%02x e=%02x\n",
|
|
adp->controller->status, adp->controller->error);
|
|
ad_invalidatequeue(adp, NULL);
|
|
return ATA_OP_FINISHED;
|
|
}
|
|
ata_dmastart(adp->controller, adp->unit,
|
|
request->dmatab, request->flags & ADR_F_READ);
|
|
return ATA_OP_CONTINUES;
|
|
}
|
|
return ATA_OP_FINISHED;
|
|
}
|
|
|
|
static void
|
|
ad_free(struct ad_request *request)
|
|
{
|
|
int s = splbio();
|
|
|
|
if (request->dmatab)
|
|
free(request->dmatab, M_DEVBUF);
|
|
request->device->tags[request->tag] = NULL;
|
|
free(request, M_AD);
|
|
|
|
splx(s);
|
|
}
|
|
|
|
static void
|
|
ad_invalidatequeue(struct ad_softc *adp, struct ad_request *request)
|
|
{
|
|
/* if tags used invalidate all other tagged transfers */
|
|
if (adp->flags & AD_F_TAG_ENABLED) {
|
|
struct ad_request *tmpreq;
|
|
int tag;
|
|
|
|
ata_printf(adp->controller, adp->unit,"invalidating queued requests\n");
|
|
for (tag = 0; tag <= adp->num_tags; tag++) {
|
|
tmpreq = adp->tags[tag];
|
|
adp->tags[tag] = NULL;
|
|
if (tmpreq == request || tmpreq == NULL)
|
|
continue;
|
|
untimeout((timeout_t *)ad_timeout, tmpreq, tmpreq->timeout_handle);
|
|
TAILQ_INSERT_HEAD(&adp->controller->ata_queue, tmpreq, chain);
|
|
}
|
|
if (ata_command(adp->controller, adp->unit, ATA_C_NOP,
|
|
0, 0, ATA_C_F_FLUSHQUEUE, ATA_WAIT_READY))
|
|
ata_printf(adp->controller, adp->unit, "flush queue failed\n");
|
|
adp->outstanding = 0;
|
|
}
|
|
}
|
|
|
|
static int
|
|
ad_tagsupported(struct ad_softc *adp)
|
|
{
|
|
const char *drives[] = {"IBM-DPTA", "IBM-DTLA", NULL};
|
|
int i = 0;
|
|
|
|
switch (adp->controller->chiptype) {
|
|
case 0x4d33105a: /* Promises before TX2 doesn't work with tagged queuing */
|
|
case 0x4d38105a:
|
|
case 0x0d30105a:
|
|
case 0x4d30105a:
|
|
return 0;
|
|
}
|
|
|
|
/* check that drive does DMA, has tags enabled, and is one we know works */
|
|
if (adp->controller->mode[ATA_DEV(adp->unit)] >= ATA_DMA &&
|
|
AD_PARAM->support.queued && AD_PARAM->enabled.queued) {
|
|
while (drives[i] != NULL) {
|
|
if (!strncmp(AD_PARAM->model, drives[i], strlen(drives[i])))
|
|
return 1;
|
|
i++;
|
|
}
|
|
/*
|
|
* check IBM's new obscure way of naming drives
|
|
* we want "IC" (IBM CORP) and "AT" or "AV" (ATA interface)
|
|
* but doesn't care about the other info (size, capacity etc)
|
|
*/
|
|
if (!strncmp(AD_PARAM->model, "IC", 2) &&
|
|
(!strncmp(AD_PARAM->model + 8, "AT", 2) ||
|
|
!strncmp(AD_PARAM->model + 8, "AV", 2)))
|
|
return 1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
ad_timeout(struct ad_request *request)
|
|
{
|
|
struct ad_softc *adp = request->device;
|
|
int s = splbio();
|
|
|
|
adp->controller->running = NULL;
|
|
ata_printf(adp->controller, adp->unit,
|
|
"%s command timeout tag=%d serv=%d - resetting\n",
|
|
(request->flags & ADR_F_READ) ? "READ" : "WRITE",
|
|
request->tag, request->serv);
|
|
|
|
if (request->flags & ADR_F_DMA_USED) {
|
|
ata_dmadone(adp->controller);
|
|
ad_invalidatequeue(adp, request);
|
|
if (request->retries == AD_MAX_RETRIES) {
|
|
ata_dmainit(adp->controller, adp->unit,
|
|
ata_pmode(AD_PARAM), -1, -1);
|
|
ata_printf(adp->controller, adp->unit,
|
|
"trying fallback to PIO mode\n");
|
|
request->retries = 0;
|
|
}
|
|
}
|
|
|
|
/* if retries still permit, reinject this request */
|
|
if (request->retries++ < AD_MAX_RETRIES) {
|
|
TAILQ_INSERT_HEAD(&adp->controller->ata_queue, request, chain);
|
|
}
|
|
else {
|
|
/* retries all used up, return error */
|
|
request->bp->bio_error = EIO;
|
|
request->bp->bio_flags |= BIO_ERROR;
|
|
biofinish(request->bp, &adp->stats, 0);
|
|
ad_free(request);
|
|
}
|
|
ata_reinit(adp->controller);
|
|
splx(s);
|
|
}
|
|
|
|
void
|
|
ad_reinit(struct ad_softc *adp)
|
|
{
|
|
/* reinit disk parameters */
|
|
ad_invalidatequeue(adp, NULL);
|
|
ata_command(adp->controller, adp->unit, ATA_C_SET_MULTI, 0,
|
|
adp->transfersize / DEV_BSIZE, 0, ATA_WAIT_INTR);
|
|
if (adp->controller->mode[ATA_DEV(adp->unit)] >= ATA_DMA)
|
|
ata_dmainit(adp->controller, adp->unit, ata_pmode(AD_PARAM),
|
|
ata_wmode(AD_PARAM), ata_umode(AD_PARAM));
|
|
else
|
|
ata_dmainit(adp->controller, adp->unit, ata_pmode(AD_PARAM), -1, -1);
|
|
}
|
|
|
|
void
|
|
ad_print(struct ad_softc *adp, char *prepend)
|
|
{
|
|
if (prepend) printf("%s", prepend);
|
|
if (bootverbose) {
|
|
ata_printf(adp->controller, adp->unit,
|
|
"<%.40s/%.8s> ATA-%d disk at ata%d-%s\n",
|
|
AD_PARAM->model, AD_PARAM->revision,
|
|
ad_version(AD_PARAM->version_major),
|
|
device_get_unit(adp->controller->dev),
|
|
(adp->unit == ATA_MASTER) ? "master" : "slave");
|
|
|
|
if (prepend) printf("%s", prepend);
|
|
ata_printf(adp->controller, adp->unit,
|
|
"%lluMB (%llu sectors), %llu C, %u H, %u S, %u B\n",
|
|
adp->total_secs / ((1024L*1024L)/DEV_BSIZE), adp->total_secs,
|
|
adp->total_secs / (adp->heads * adp->sectors),
|
|
adp->heads, adp->sectors, DEV_BSIZE);
|
|
|
|
if (prepend) printf("%s", prepend);
|
|
ata_printf(adp->controller, adp->unit,
|
|
"%d secs/int, %d depth queue, %s%s\n",
|
|
adp->transfersize / DEV_BSIZE, adp->num_tags + 1,
|
|
(adp->flags & AD_F_TAG_ENABLED) ? "tagged " : "",
|
|
ata_mode2str(adp->controller->mode[ATA_DEV(adp->unit)]));
|
|
|
|
if (prepend) printf("%s", prepend);
|
|
ata_printf(adp->controller, adp->unit,
|
|
"piomode=%d dmamode=%d udmamode=%d cblid=%d\n",
|
|
ata_pmode(AD_PARAM), ata_wmode(AD_PARAM),
|
|
ata_umode(AD_PARAM), AD_PARAM->hwres_cblid);
|
|
|
|
}
|
|
else
|
|
ata_printf(adp->controller, adp->unit,
|
|
"%lluMB <%.40s> [%lld/%d/%d] at ata%d-%s %s%s\n",
|
|
adp->total_secs / ((1024L * 1024L) / DEV_BSIZE),
|
|
AD_PARAM->model, adp->total_secs / (adp->heads*adp->sectors),
|
|
adp->heads, adp->sectors,
|
|
device_get_unit(adp->controller->dev),
|
|
(adp->unit == ATA_MASTER) ? "master" : "slave",
|
|
(adp->flags & AD_F_TAG_ENABLED) ? "tagged " : "",
|
|
ata_mode2str(adp->controller->mode[ATA_DEV(adp->unit)]));
|
|
}
|
|
|
|
static int
|
|
ad_version(u_int16_t version)
|
|
{
|
|
int bit;
|
|
|
|
if (version == 0xffff)
|
|
return 0;
|
|
for (bit = 15; bit >= 0; bit--)
|
|
if (version & (1<<bit))
|
|
return bit;
|
|
return 0;
|
|
}
|