mirror of
https://git.FreeBSD.org/src.git
synced 2024-12-27 11:55:06 +00:00
8b149b5131
ushort. In most of these files, there was a mixture of both styles and this change just makes them self-consistent. Requested by: bde (kern_ktrace.c)
1596 lines
41 KiB
C
1596 lines
41 KiB
C
/*
|
|
* Copyright (C) 1995 by Pavel Antonov, Moscow, Russia.
|
|
* Copyright (C) 1995 by Andrey A. Chernov, Moscow, Russia.
|
|
* Copyright (C) 2002 by John Baldwin <jhb@FreeBSD.org>
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
/*
|
|
* SDL Communications Riscom/8 (based on Cirrus Logic CL-CD180) driver
|
|
*
|
|
*/
|
|
|
|
/*#define RCDEBUG*/
|
|
|
|
#include "opt_tty.h"
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/conf.h>
|
|
#include <sys/fcntl.h>
|
|
#include <sys/interrupt.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/tty.h>
|
|
#include <machine/bus.h>
|
|
#include <machine/resource.h>
|
|
#include <sys/rman.h>
|
|
|
|
#include <dev/ic/cd180.h>
|
|
#include <dev/rc/rcreg.h>
|
|
#include <isa/isavar.h>
|
|
|
|
#define IOBASE_ADDRS 14
|
|
|
|
#define DEV_TO_RC(dev) (struct rc_chans *)((dev)->si_drv1)
|
|
#define TTY_TO_RC(tty) DEV_TO_RC((tty)->t_dev)
|
|
|
|
#define rcin(sc, port) RC_IN(sc, port)
|
|
#define rcout(sc, port, v) RC_OUT(sc, port, v)
|
|
|
|
#define WAITFORCCR(sc, chan) rc_wait0((sc), (chan), __LINE__)
|
|
|
|
#define CCRCMD(sc, chan, cmd) do { \
|
|
WAITFORCCR((sc), (chan)); \
|
|
rcout((sc), CD180_CCR, (cmd)); \
|
|
} while (0)
|
|
|
|
#define RC_IBUFSIZE 256
|
|
#define RB_I_HIGH_WATER (TTYHOG - 2 * RC_IBUFSIZE)
|
|
#define RC_OBUFSIZE 512
|
|
#define RC_IHIGHWATER (3 * RC_IBUFSIZE / 4)
|
|
#define INPUT_FLAGS_SHIFT (2 * RC_IBUFSIZE)
|
|
#define LOTS_OF_EVENTS 64
|
|
|
|
#define RC_FAKEID 0x10
|
|
|
|
#define CALLOUT(dev) (((intptr_t)(dev)->si_drv2) != 0)
|
|
|
|
/* Per-channel structure */
|
|
struct rc_chans {
|
|
struct rc_softc *rc_rcb; /* back ptr */
|
|
dev_t rc_dev; /* non-callout device */
|
|
dev_t rc_cdev; /* callout device */
|
|
u_short rc_flags; /* Misc. flags */
|
|
int rc_chan; /* Channel # */
|
|
u_char rc_ier; /* intr. enable reg */
|
|
u_char rc_msvr; /* modem sig. status */
|
|
u_char rc_cor2; /* options reg */
|
|
u_char rc_pendcmd; /* special cmd pending */
|
|
u_int rc_dtrwait; /* dtr timeout */
|
|
u_int rc_dcdwaits; /* how many waits DCD in open */
|
|
u_char rc_hotchar; /* end packed optimize */
|
|
struct tty rc_tp; /* tty struct */
|
|
u_char *rc_iptr; /* Chars input buffer */
|
|
u_char *rc_hiwat; /* hi-water mark */
|
|
u_char *rc_bufend; /* end of buffer */
|
|
u_char *rc_optr; /* ptr in output buf */
|
|
u_char *rc_obufend; /* end of output buf */
|
|
u_char rc_ibuf[4 * RC_IBUFSIZE]; /* input buffer */
|
|
u_char rc_obuf[RC_OBUFSIZE]; /* output buffer */
|
|
struct callout rc_dtrcallout;
|
|
};
|
|
|
|
/* Per-board structure */
|
|
struct rc_softc {
|
|
device_t sc_dev;
|
|
struct resource *sc_irq;
|
|
struct resource *sc_port[IOBASE_ADDRS];
|
|
int sc_irqrid;
|
|
void *sc_hwicookie;
|
|
bus_space_tag_t sc_bt;
|
|
bus_space_handle_t sc_bh;
|
|
u_int sc_unit; /* unit # */
|
|
u_char sc_dtr; /* DTR status */
|
|
int sc_opencount;
|
|
int sc_scheduled_event;
|
|
void *sc_swicookie;
|
|
struct rc_chans sc_channels[CD180_NCHAN]; /* channels */
|
|
};
|
|
|
|
/* Static prototypes */
|
|
static void rc_release_resources(device_t dev);
|
|
static void rc_intr(void *);
|
|
static void rc_hwreset(struct rc_softc *, unsigned int);
|
|
static int rc_test(struct rc_softc *);
|
|
static void rc_discard_output(struct rc_chans *);
|
|
static void rc_hardclose(struct rc_chans *);
|
|
static int rc_modctl(struct rc_chans *, int, int);
|
|
static void rc_start(struct tty *);
|
|
static void rc_stop(struct tty *, int rw);
|
|
static int rc_param(struct tty *, struct termios *);
|
|
static void rc_pollcard(void *);
|
|
static void rc_reinit(struct rc_softc *);
|
|
#ifdef RCDEBUG
|
|
static void printrcflags();
|
|
#endif
|
|
static void rc_dtrwakeup(void *);
|
|
static void disc_optim(struct tty *tp, struct termios *t, struct rc_chans *);
|
|
static void rc_wait0(struct rc_softc *sc, int chan, int line);
|
|
|
|
static d_open_t rcopen;
|
|
static d_close_t rcclose;
|
|
static d_ioctl_t rcioctl;
|
|
|
|
#define CDEV_MAJOR 63
|
|
static struct cdevsw rc_cdevsw = {
|
|
.d_open = rcopen,
|
|
.d_close = rcclose,
|
|
.d_read = ttyread,
|
|
.d_write = ttywrite,
|
|
.d_ioctl = rcioctl,
|
|
.d_poll = ttypoll,
|
|
.d_name = "rc",
|
|
.d_maj = CDEV_MAJOR,
|
|
.d_flags = D_TTY,
|
|
.d_kqfilter = ttykqfilter,
|
|
};
|
|
|
|
static devclass_t rc_devclass;
|
|
|
|
/* Flags */
|
|
#define RC_DTR_OFF 0x0001 /* DTR wait, for close/open */
|
|
#define RC_ACTOUT 0x0002 /* Dial-out port active */
|
|
#define RC_RTSFLOW 0x0004 /* RTS flow ctl enabled */
|
|
#define RC_CTSFLOW 0x0008 /* CTS flow ctl enabled */
|
|
#define RC_DORXFER 0x0010 /* RXFER event planned */
|
|
#define RC_DOXXFER 0x0020 /* XXFER event planned */
|
|
#define RC_MODCHG 0x0040 /* Modem status changed */
|
|
#define RC_OSUSP 0x0080 /* Output suspended */
|
|
#define RC_OSBUSY 0x0100 /* start() routine in progress */
|
|
#define RC_WAS_BUFOVFL 0x0200 /* low-level buffer ovferflow */
|
|
#define RC_WAS_SILOVFL 0x0400 /* silo buffer overflow */
|
|
#define RC_SEND_RDY 0x0800 /* ready to send */
|
|
|
|
/* Table for translation of RCSR status bits to internal form */
|
|
static int rc_rcsrt[16] = {
|
|
0, TTY_OE, TTY_FE,
|
|
TTY_FE|TTY_OE, TTY_PE, TTY_PE|TTY_OE,
|
|
TTY_PE|TTY_FE, TTY_PE|TTY_FE|TTY_OE, TTY_BI,
|
|
TTY_BI|TTY_OE, TTY_BI|TTY_FE, TTY_BI|TTY_FE|TTY_OE,
|
|
TTY_BI|TTY_PE, TTY_BI|TTY_PE|TTY_OE, TTY_BI|TTY_PE|TTY_FE,
|
|
TTY_BI|TTY_PE|TTY_FE|TTY_OE
|
|
};
|
|
|
|
static int rc_ports[] =
|
|
{ 0x220, 0x240, 0x250, 0x260, 0x2a0, 0x2b0, 0x300, 0x320 };
|
|
static int iobase_addrs[IOBASE_ADDRS] =
|
|
{ 0, 0x400, 0x800, 0xc00, 0x1400, 0x1800, 0x1c00, 0x2000,
|
|
0x3000, 0x3400, 0x3800, 0x3c00, 0x4000, 0x8000 };
|
|
|
|
/**********************************************/
|
|
|
|
static int
|
|
rc_probe(device_t dev)
|
|
{
|
|
u_int port;
|
|
int i, found;
|
|
|
|
/*
|
|
* We don't know of any PnP ID's for these cards.
|
|
*/
|
|
if (isa_get_logicalid(dev) != 0)
|
|
return (ENXIO);
|
|
|
|
/*
|
|
* We have to have an IO port hint that is valid.
|
|
*/
|
|
port = isa_get_port(dev);
|
|
if (port == -1)
|
|
return (ENXIO);
|
|
found = 0;
|
|
for (i = 0; i < sizeof(rc_ports) / sizeof(int); i++)
|
|
if (rc_ports[i] == port) {
|
|
found = 1;
|
|
break;
|
|
}
|
|
if (!found)
|
|
return (ENXIO);
|
|
|
|
/*
|
|
* We have to have an IRQ hint.
|
|
*/
|
|
if (isa_get_irq(dev) == -1)
|
|
return (ENXIO);
|
|
|
|
device_set_desc(dev, "SDL Riscom/8");
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
rc_attach(device_t dev)
|
|
{
|
|
struct rc_chans *rc;
|
|
struct tty *tp;
|
|
struct rc_softc *sc;
|
|
u_int port;
|
|
int base, chan, error, i, x;
|
|
dev_t cdev;
|
|
|
|
sc = device_get_softc(dev);
|
|
sc->sc_dev = dev;
|
|
|
|
/*
|
|
* We need to have IO ports. Lots of them. We need
|
|
* the following ranges relative to the base port:
|
|
* 0x0 - 0x10
|
|
* 0x400 - 0x410
|
|
* 0x800 - 0x810
|
|
* 0xc00 - 0xc10
|
|
* 0x1400 - 0x1410
|
|
* 0x1800 - 0x1810
|
|
* 0x1c00 - 0x1c10
|
|
* 0x2000 - 0x2010
|
|
* 0x3000 - 0x3010
|
|
* 0x3400 - 0x3410
|
|
* 0x3800 - 0x3810
|
|
* 0x3c00 - 0x3c10
|
|
* 0x4000 - 0x4010
|
|
* 0x8000 - 0x8010
|
|
*/
|
|
port = isa_get_port(dev);
|
|
for (i = 0; i < IOBASE_ADDRS; i++)
|
|
if (bus_set_resource(dev, SYS_RES_IOPORT, i,
|
|
port + iobase_addrs[i], 0x10) != 0)
|
|
return (ENXIO);
|
|
error = ENOMEM;
|
|
for (i = 0; i < IOBASE_ADDRS; i++) {
|
|
x = i;
|
|
sc->sc_port[i] = bus_alloc_resource(dev, SYS_RES_IOPORT, &x,
|
|
0ul, ~0ul, 0x10, RF_ACTIVE);
|
|
if (x != i) {
|
|
device_printf(dev, "ioport %d was rid %d\n", i, x);
|
|
goto fail;
|
|
}
|
|
if (sc->sc_port[i] == NULL) {
|
|
device_printf(dev, "failed to alloc ioports %x-%x\n",
|
|
port + iobase_addrs[i],
|
|
port + iobase_addrs[i] + 0x10);
|
|
goto fail;
|
|
}
|
|
}
|
|
sc->sc_bt = rman_get_bustag(sc->sc_port[0]);
|
|
sc->sc_bh = rman_get_bushandle(sc->sc_port[0]);
|
|
|
|
sc->sc_irq = bus_alloc_resource(dev, SYS_RES_IRQ, &sc->sc_irqrid,
|
|
0ul, ~0ul, 1, RF_ACTIVE);
|
|
if (sc->sc_irq == NULL) {
|
|
device_printf(dev, "failed to alloc IRQ\n");
|
|
goto fail;
|
|
}
|
|
|
|
/*
|
|
* Now do some actual tests to make sure it works.
|
|
*/
|
|
error = ENXIO;
|
|
rcout(sc, CD180_PPRL, 0x22); /* Random values to Prescale reg. */
|
|
rcout(sc, CD180_PPRH, 0x11);
|
|
if (rcin(sc, CD180_PPRL) != 0x22 || rcin(sc, CD180_PPRH) != 0x11)
|
|
goto fail;
|
|
if (rc_test(sc))
|
|
goto fail;
|
|
|
|
/*
|
|
* Ok, start actually hooking things up.
|
|
*/
|
|
sc->sc_unit = device_get_unit(dev);
|
|
/*sc->sc_chipid = 0x10 + device_get_unit(dev);*/
|
|
device_printf(dev, "%d chans, firmware rev. %c\n",
|
|
CD180_NCHAN, (rcin(sc, CD180_GFRCR) & 0xF) + 'A');
|
|
rc = sc->sc_channels;
|
|
base = CD180_NCHAN * sc->sc_unit;
|
|
for (chan = 0; chan < CD180_NCHAN; chan++, rc++) {
|
|
rc->rc_rcb = sc;
|
|
rc->rc_chan = chan;
|
|
rc->rc_iptr = rc->rc_ibuf;
|
|
rc->rc_bufend = &rc->rc_ibuf[RC_IBUFSIZE];
|
|
rc->rc_hiwat = &rc->rc_ibuf[RC_IHIGHWATER];
|
|
rc->rc_optr = rc->rc_obufend = rc->rc_obuf;
|
|
rc->rc_dtrwait = 3 * hz;
|
|
callout_init(&rc->rc_dtrcallout, 0);
|
|
tp = &rc->rc_tp;
|
|
ttychars(tp);
|
|
tp->t_lflag = tp->t_iflag = tp->t_oflag = 0;
|
|
tp->t_cflag = TTYDEF_CFLAG;
|
|
tp->t_ispeed = tp->t_ospeed = TTYDEF_SPEED;
|
|
cdev = make_dev(&rc_cdevsw, chan + base,
|
|
UID_ROOT, GID_WHEEL, 0600, "ttym%d", chan + base);
|
|
cdev->si_drv1 = rc;
|
|
cdev->si_drv2 = 0;
|
|
cdev->si_tty = tp;
|
|
rc->rc_dev = cdev;
|
|
cdev = make_dev(&rc_cdevsw, chan + base + 128,
|
|
UID_UUCP, GID_DIALER, 0660, "cuam%d", chan + base);
|
|
cdev->si_drv1 = rc;
|
|
cdev->si_drv2 = (void *)1;
|
|
cdev->si_tty = tp;
|
|
rc->rc_cdev = cdev;
|
|
}
|
|
|
|
error = bus_setup_intr(dev, sc->sc_irq, INTR_TYPE_TTY, rc_intr, sc,
|
|
&sc->sc_hwicookie);
|
|
if (error) {
|
|
device_printf(dev, "failed to register interrupt handler\n");
|
|
goto fail;
|
|
}
|
|
|
|
swi_add(&tty_ithd, "tty:rc", rc_pollcard, sc, SWI_TTY, 0,
|
|
&sc->sc_swicookie);
|
|
return (0);
|
|
|
|
fail:
|
|
rc_release_resources(dev);
|
|
return (error);
|
|
}
|
|
|
|
static int
|
|
rc_detach(device_t dev)
|
|
{
|
|
struct rc_softc *sc;
|
|
struct rc_chans *rc;
|
|
int error, i, s;
|
|
|
|
sc = device_get_softc(dev);
|
|
if (sc->sc_opencount > 0)
|
|
return (EBUSY);
|
|
sc->sc_opencount = -1;
|
|
|
|
rc = sc->sc_channels;
|
|
for (i = 0; i < CD180_NCHAN; i++, rc++) {
|
|
destroy_dev(rc->rc_dev);
|
|
destroy_dev(rc->rc_cdev);
|
|
}
|
|
|
|
rc = sc->sc_channels;
|
|
s = splsoftclock();
|
|
for (i = 0; i < CD180_NCHAN; i++) {
|
|
if ((rc->rc_flags & RC_DTR_OFF) &&
|
|
!callout_stop(&rc->rc_dtrcallout))
|
|
tsleep(&rc->rc_dtrwait, TTIPRI, "rcdtrdet", 0);
|
|
}
|
|
|
|
error = bus_teardown_intr(dev, sc->sc_irq, sc->sc_hwicookie);
|
|
if (error)
|
|
device_printf(dev, "failed to deregister interrupt handler\n");
|
|
ithread_remove_handler(sc->sc_swicookie);
|
|
rc_release_resources(dev);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
rc_release_resources(device_t dev)
|
|
{
|
|
struct rc_softc *sc;
|
|
int i;
|
|
|
|
sc = device_get_softc(dev);
|
|
if (sc->sc_irq != NULL) {
|
|
bus_release_resource(dev, SYS_RES_IRQ, sc->sc_irqrid,
|
|
sc->sc_irq);
|
|
sc->sc_irq = NULL;
|
|
}
|
|
for (i = 0; i < IOBASE_ADDRS; i++) {
|
|
if (sc->sc_port[i] == NULL)
|
|
break;
|
|
bus_release_resource(dev, SYS_RES_IOPORT, i, sc->sc_port[i]);
|
|
sc->sc_port[i] = NULL;
|
|
}
|
|
}
|
|
|
|
/* RC interrupt handling */
|
|
static void
|
|
rc_intr(void *arg)
|
|
{
|
|
struct rc_softc *sc;
|
|
struct rc_chans *rc;
|
|
int resid, chan;
|
|
u_char val, iack, bsr, ucnt, *optr;
|
|
int good_data, t_state;
|
|
|
|
sc = (struct rc_softc *)arg;
|
|
bsr = ~(rcin(sc, RC_BSR));
|
|
if (!(bsr & (RC_BSR_TOUT|RC_BSR_RXINT|RC_BSR_TXINT|RC_BSR_MOINT))) {
|
|
device_printf(sc->sc_dev, "extra interrupt\n");
|
|
rcout(sc, CD180_EOIR, 0);
|
|
return;
|
|
}
|
|
|
|
while (bsr & (RC_BSR_TOUT|RC_BSR_RXINT|RC_BSR_TXINT|RC_BSR_MOINT)) {
|
|
#ifdef RCDEBUG_DETAILED
|
|
device_printf(sc->sc_dev, "intr (%p) %s%s%s%s\n", arg, bsr,
|
|
(bsr & RC_BSR_TOUT)?"TOUT ":"",
|
|
(bsr & RC_BSR_RXINT)?"RXINT ":"",
|
|
(bsr & RC_BSR_TXINT)?"TXINT ":"",
|
|
(bsr & RC_BSR_MOINT)?"MOINT":"");
|
|
#endif
|
|
if (bsr & RC_BSR_TOUT) {
|
|
device_printf(sc->sc_dev,
|
|
"hardware failure, reset board\n");
|
|
rcout(sc, RC_CTOUT, 0);
|
|
rc_reinit(sc);
|
|
return;
|
|
}
|
|
if (bsr & RC_BSR_RXINT) {
|
|
iack = rcin(sc, RC_PILR_RX);
|
|
good_data = (iack == (GIVR_IT_RGDI | RC_FAKEID));
|
|
if (!good_data && iack != (GIVR_IT_REI | RC_FAKEID)) {
|
|
device_printf(sc->sc_dev,
|
|
"fake rxint: %02x\n", iack);
|
|
goto more_intrs;
|
|
}
|
|
chan = ((rcin(sc, CD180_GICR) & GICR_CHAN) >> GICR_LSH);
|
|
rc = &sc->sc_channels[chan];
|
|
t_state = rc->rc_tp.t_state;
|
|
/* Do RTS flow control stuff */
|
|
if ( (rc->rc_flags & RC_RTSFLOW)
|
|
|| !(t_state & TS_ISOPEN)
|
|
) {
|
|
if ( ( !(t_state & TS_ISOPEN)
|
|
|| (t_state & TS_TBLOCK)
|
|
)
|
|
&& (rc->rc_msvr & MSVR_RTS)
|
|
)
|
|
rcout(sc, CD180_MSVR,
|
|
rc->rc_msvr &= ~MSVR_RTS);
|
|
else if (!(rc->rc_msvr & MSVR_RTS))
|
|
rcout(sc, CD180_MSVR,
|
|
rc->rc_msvr |= MSVR_RTS);
|
|
}
|
|
ucnt = rcin(sc, CD180_RDCR) & 0xF;
|
|
resid = 0;
|
|
|
|
if (t_state & TS_ISOPEN) {
|
|
/* check for input buffer overflow */
|
|
if ((rc->rc_iptr + ucnt) >= rc->rc_bufend) {
|
|
resid = ucnt;
|
|
ucnt = rc->rc_bufend - rc->rc_iptr;
|
|
resid -= ucnt;
|
|
if (!(rc->rc_flags & RC_WAS_BUFOVFL)) {
|
|
rc->rc_flags |= RC_WAS_BUFOVFL;
|
|
sc->sc_scheduled_event++;
|
|
}
|
|
}
|
|
optr = rc->rc_iptr;
|
|
/* check foor good data */
|
|
if (good_data) {
|
|
while (ucnt-- > 0) {
|
|
val = rcin(sc, CD180_RDR);
|
|
optr[0] = val;
|
|
optr[INPUT_FLAGS_SHIFT] = 0;
|
|
optr++;
|
|
sc->sc_scheduled_event++;
|
|
if (val != 0 && val == rc->rc_hotchar)
|
|
swi_sched(sc->sc_swicookie, 0);
|
|
}
|
|
} else {
|
|
/* Store also status data */
|
|
while (ucnt-- > 0) {
|
|
iack = rcin(sc, CD180_RCSR);
|
|
if (iack & RCSR_Timeout)
|
|
break;
|
|
if ( (iack & RCSR_OE)
|
|
&& !(rc->rc_flags & RC_WAS_SILOVFL)) {
|
|
rc->rc_flags |= RC_WAS_SILOVFL;
|
|
sc->sc_scheduled_event++;
|
|
}
|
|
val = rcin(sc, CD180_RDR);
|
|
/*
|
|
Don't store PE if IGNPAR and BREAK if IGNBRK,
|
|
this hack allows "raw" tty optimization
|
|
works even if IGN* is set.
|
|
*/
|
|
if ( !(iack & (RCSR_PE|RCSR_FE|RCSR_Break))
|
|
|| ((!(iack & (RCSR_PE|RCSR_FE))
|
|
|| !(rc->rc_tp.t_iflag & IGNPAR))
|
|
&& (!(iack & RCSR_Break)
|
|
|| !(rc->rc_tp.t_iflag & IGNBRK)))) {
|
|
if ( (iack & (RCSR_PE|RCSR_FE))
|
|
&& (t_state & TS_CAN_BYPASS_L_RINT)
|
|
&& ((iack & RCSR_FE)
|
|
|| ((iack & RCSR_PE)
|
|
&& (rc->rc_tp.t_iflag & INPCK))))
|
|
val = 0;
|
|
else if (val != 0 && val == rc->rc_hotchar)
|
|
swi_sched(sc->sc_swicookie, 0);
|
|
optr[0] = val;
|
|
optr[INPUT_FLAGS_SHIFT] = iack;
|
|
optr++;
|
|
sc->sc_scheduled_event++;
|
|
}
|
|
}
|
|
}
|
|
rc->rc_iptr = optr;
|
|
rc->rc_flags |= RC_DORXFER;
|
|
} else
|
|
resid = ucnt;
|
|
/* Clear FIFO if necessary */
|
|
while (resid-- > 0) {
|
|
if (!good_data)
|
|
iack = rcin(sc, CD180_RCSR);
|
|
else
|
|
iack = 0;
|
|
if (iack & RCSR_Timeout)
|
|
break;
|
|
(void) rcin(sc, CD180_RDR);
|
|
}
|
|
goto more_intrs;
|
|
}
|
|
if (bsr & RC_BSR_MOINT) {
|
|
iack = rcin(sc, RC_PILR_MODEM);
|
|
if (iack != (GIVR_IT_MSCI | RC_FAKEID)) {
|
|
device_printf(sc->sc_dev, "fake moint: %02x\n",
|
|
iack);
|
|
goto more_intrs;
|
|
}
|
|
chan = ((rcin(sc, CD180_GICR) & GICR_CHAN) >> GICR_LSH);
|
|
rc = &sc->sc_channels[chan];
|
|
iack = rcin(sc, CD180_MCR);
|
|
rc->rc_msvr = rcin(sc, CD180_MSVR);
|
|
rcout(sc, CD180_MCR, 0);
|
|
#ifdef RCDEBUG
|
|
printrcflags(rc, "moint");
|
|
#endif
|
|
if (rc->rc_flags & RC_CTSFLOW) {
|
|
if (rc->rc_msvr & MSVR_CTS)
|
|
rc->rc_flags |= RC_SEND_RDY;
|
|
else
|
|
rc->rc_flags &= ~RC_SEND_RDY;
|
|
} else
|
|
rc->rc_flags |= RC_SEND_RDY;
|
|
if ((iack & MCR_CDchg) && !(rc->rc_flags & RC_MODCHG)) {
|
|
sc->sc_scheduled_event += LOTS_OF_EVENTS;
|
|
rc->rc_flags |= RC_MODCHG;
|
|
swi_sched(sc->sc_swicookie, 0);
|
|
}
|
|
goto more_intrs;
|
|
}
|
|
if (bsr & RC_BSR_TXINT) {
|
|
iack = rcin(sc, RC_PILR_TX);
|
|
if (iack != (GIVR_IT_TDI | RC_FAKEID)) {
|
|
device_printf(sc->sc_dev, "fake txint: %02x\n",
|
|
iack);
|
|
goto more_intrs;
|
|
}
|
|
chan = ((rcin(sc, CD180_GICR) & GICR_CHAN) >> GICR_LSH);
|
|
rc = &sc->sc_channels[chan];
|
|
if ( (rc->rc_flags & RC_OSUSP)
|
|
|| !(rc->rc_flags & RC_SEND_RDY)
|
|
)
|
|
goto more_intrs;
|
|
/* Handle breaks and other stuff */
|
|
if (rc->rc_pendcmd) {
|
|
rcout(sc, CD180_COR2, rc->rc_cor2 |= COR2_ETC);
|
|
rcout(sc, CD180_TDR, CD180_C_ESC);
|
|
rcout(sc, CD180_TDR, rc->rc_pendcmd);
|
|
rcout(sc, CD180_COR2, rc->rc_cor2 &= ~COR2_ETC);
|
|
rc->rc_pendcmd = 0;
|
|
goto more_intrs;
|
|
}
|
|
optr = rc->rc_optr;
|
|
resid = rc->rc_obufend - optr;
|
|
if (resid > CD180_NFIFO)
|
|
resid = CD180_NFIFO;
|
|
while (resid-- > 0)
|
|
rcout(sc, CD180_TDR, *optr++);
|
|
rc->rc_optr = optr;
|
|
|
|
/* output completed? */
|
|
if (optr >= rc->rc_obufend) {
|
|
rcout(sc, CD180_IER, rc->rc_ier &= ~IER_TxRdy);
|
|
#ifdef RCDEBUG
|
|
device_printf(sc->sc_dev,
|
|
"channel %d: output completed\n",
|
|
rc->rc_chan);
|
|
#endif
|
|
if (!(rc->rc_flags & RC_DOXXFER)) {
|
|
sc->sc_scheduled_event += LOTS_OF_EVENTS;
|
|
rc->rc_flags |= RC_DOXXFER;
|
|
swi_sched(sc->sc_swicookie, 0);
|
|
}
|
|
}
|
|
}
|
|
more_intrs:
|
|
rcout(sc, CD180_EOIR, 0); /* end of interrupt */
|
|
rcout(sc, RC_CTOUT, 0);
|
|
bsr = ~(rcin(sc, RC_BSR));
|
|
}
|
|
}
|
|
|
|
/* Feed characters to output buffer */
|
|
static void
|
|
rc_start(struct tty *tp)
|
|
{
|
|
struct rc_softc *sc;
|
|
struct rc_chans *rc;
|
|
int s;
|
|
|
|
rc = TTY_TO_RC(tp);
|
|
if (rc->rc_flags & RC_OSBUSY)
|
|
return;
|
|
sc = rc->rc_rcb;
|
|
s = spltty();
|
|
rc->rc_flags |= RC_OSBUSY;
|
|
critical_enter();
|
|
if (tp->t_state & TS_TTSTOP)
|
|
rc->rc_flags |= RC_OSUSP;
|
|
else
|
|
rc->rc_flags &= ~RC_OSUSP;
|
|
/* Do RTS flow control stuff */
|
|
if ( (rc->rc_flags & RC_RTSFLOW)
|
|
&& (tp->t_state & TS_TBLOCK)
|
|
&& (rc->rc_msvr & MSVR_RTS)
|
|
) {
|
|
rcout(sc, CD180_CAR, rc->rc_chan);
|
|
rcout(sc, CD180_MSVR, rc->rc_msvr &= ~MSVR_RTS);
|
|
} else if (!(rc->rc_msvr & MSVR_RTS)) {
|
|
rcout(sc, CD180_CAR, rc->rc_chan);
|
|
rcout(sc, CD180_MSVR, rc->rc_msvr |= MSVR_RTS);
|
|
}
|
|
critical_exit();
|
|
if (tp->t_state & (TS_TIMEOUT|TS_TTSTOP))
|
|
goto out;
|
|
#ifdef RCDEBUG
|
|
printrcflags(rc, "rcstart");
|
|
#endif
|
|
ttwwakeup(tp);
|
|
#ifdef RCDEBUG
|
|
printf("rcstart: outq = %d obuf = %d\n",
|
|
tp->t_outq.c_cc, rc->rc_obufend - rc->rc_optr);
|
|
#endif
|
|
if (tp->t_state & TS_BUSY)
|
|
goto out; /* output still in progress ... */
|
|
|
|
if (tp->t_outq.c_cc > 0) {
|
|
u_int ocnt;
|
|
|
|
tp->t_state |= TS_BUSY;
|
|
ocnt = q_to_b(&tp->t_outq, rc->rc_obuf, sizeof rc->rc_obuf);
|
|
critical_enter();
|
|
rc->rc_optr = rc->rc_obuf;
|
|
rc->rc_obufend = rc->rc_optr + ocnt;
|
|
critical_exit();
|
|
if (!(rc->rc_ier & IER_TxRdy)) {
|
|
#ifdef RCDEBUG
|
|
device_printf(sc->sc_dev,
|
|
"channel %d: rcstart enable txint\n", rc->rc_chan);
|
|
#endif
|
|
rcout(sc, CD180_CAR, rc->rc_chan);
|
|
rcout(sc, CD180_IER, rc->rc_ier |= IER_TxRdy);
|
|
}
|
|
}
|
|
out:
|
|
rc->rc_flags &= ~RC_OSBUSY;
|
|
(void) splx(s);
|
|
}
|
|
|
|
/* Handle delayed events. */
|
|
void
|
|
rc_pollcard(void *arg)
|
|
{
|
|
struct rc_softc *sc;
|
|
struct rc_chans *rc;
|
|
struct tty *tp;
|
|
u_char *tptr, *eptr;
|
|
int chan, icnt;
|
|
|
|
sc = (struct rc_softc *)arg;
|
|
if (sc->sc_scheduled_event == 0)
|
|
return;
|
|
do {
|
|
rc = sc->sc_channels;
|
|
for (chan = 0; chan < CD180_NCHAN; rc++, chan++) {
|
|
tp = &rc->rc_tp;
|
|
#ifdef RCDEBUG
|
|
if (rc->rc_flags & (RC_DORXFER|RC_DOXXFER|RC_MODCHG|
|
|
RC_WAS_BUFOVFL|RC_WAS_SILOVFL))
|
|
printrcflags(rc, "rcevent");
|
|
#endif
|
|
if (rc->rc_flags & RC_WAS_BUFOVFL) {
|
|
critical_enter();
|
|
rc->rc_flags &= ~RC_WAS_BUFOVFL;
|
|
sc->sc_scheduled_event--;
|
|
critical_exit();
|
|
device_printf(sc->sc_dev,
|
|
"channel %d: interrupt-level buffer overflow\n",
|
|
chan);
|
|
}
|
|
if (rc->rc_flags & RC_WAS_SILOVFL) {
|
|
critical_enter();
|
|
rc->rc_flags &= ~RC_WAS_SILOVFL;
|
|
sc->sc_scheduled_event--;
|
|
critical_exit();
|
|
device_printf(sc->sc_dev,
|
|
"channel %d: silo overflow\n", chan);
|
|
}
|
|
if (rc->rc_flags & RC_MODCHG) {
|
|
critical_enter();
|
|
rc->rc_flags &= ~RC_MODCHG;
|
|
sc->sc_scheduled_event -= LOTS_OF_EVENTS;
|
|
critical_exit();
|
|
(*linesw[tp->t_line].l_modem)(tp, !!(rc->rc_msvr & MSVR_CD));
|
|
}
|
|
if (rc->rc_flags & RC_DORXFER) {
|
|
critical_enter();
|
|
rc->rc_flags &= ~RC_DORXFER;
|
|
eptr = rc->rc_iptr;
|
|
if (rc->rc_bufend == &rc->rc_ibuf[2 * RC_IBUFSIZE])
|
|
tptr = &rc->rc_ibuf[RC_IBUFSIZE];
|
|
else
|
|
tptr = rc->rc_ibuf;
|
|
icnt = eptr - tptr;
|
|
if (icnt > 0) {
|
|
if (rc->rc_bufend == &rc->rc_ibuf[2 * RC_IBUFSIZE]) {
|
|
rc->rc_iptr = rc->rc_ibuf;
|
|
rc->rc_bufend = &rc->rc_ibuf[RC_IBUFSIZE];
|
|
rc->rc_hiwat = &rc->rc_ibuf[RC_IHIGHWATER];
|
|
} else {
|
|
rc->rc_iptr = &rc->rc_ibuf[RC_IBUFSIZE];
|
|
rc->rc_bufend = &rc->rc_ibuf[2 * RC_IBUFSIZE];
|
|
rc->rc_hiwat =
|
|
&rc->rc_ibuf[RC_IBUFSIZE + RC_IHIGHWATER];
|
|
}
|
|
if ( (rc->rc_flags & RC_RTSFLOW)
|
|
&& (tp->t_state & TS_ISOPEN)
|
|
&& !(tp->t_state & TS_TBLOCK)
|
|
&& !(rc->rc_msvr & MSVR_RTS)
|
|
) {
|
|
rcout(sc, CD180_CAR, chan);
|
|
rcout(sc, CD180_MSVR,
|
|
rc->rc_msvr |= MSVR_RTS);
|
|
}
|
|
sc->sc_scheduled_event -= icnt;
|
|
}
|
|
critical_exit();
|
|
|
|
if (icnt <= 0 || !(tp->t_state & TS_ISOPEN))
|
|
goto done1;
|
|
|
|
if ( (tp->t_state & TS_CAN_BYPASS_L_RINT)
|
|
&& !(tp->t_state & TS_LOCAL)) {
|
|
if ((tp->t_rawq.c_cc + icnt) >= RB_I_HIGH_WATER
|
|
&& ((rc->rc_flags & RC_RTSFLOW) || (tp->t_iflag & IXOFF))
|
|
&& !(tp->t_state & TS_TBLOCK))
|
|
ttyblock(tp);
|
|
tk_nin += icnt;
|
|
tk_rawcc += icnt;
|
|
tp->t_rawcc += icnt;
|
|
if (b_to_q(tptr, icnt, &tp->t_rawq))
|
|
device_printf(sc->sc_dev,
|
|
"channel %d: tty-level buffer overflow\n",
|
|
chan);
|
|
ttwakeup(tp);
|
|
if ((tp->t_state & TS_TTSTOP) && ((tp->t_iflag & IXANY)
|
|
|| (tp->t_cc[VSTART] == tp->t_cc[VSTOP]))) {
|
|
tp->t_state &= ~TS_TTSTOP;
|
|
tp->t_lflag &= ~FLUSHO;
|
|
rc_start(tp);
|
|
}
|
|
} else {
|
|
for (; tptr < eptr; tptr++)
|
|
(*linesw[tp->t_line].l_rint)
|
|
(tptr[0] |
|
|
rc_rcsrt[tptr[INPUT_FLAGS_SHIFT] & 0xF], tp);
|
|
}
|
|
done1: ;
|
|
}
|
|
if (rc->rc_flags & RC_DOXXFER) {
|
|
critical_enter();
|
|
sc->sc_scheduled_event -= LOTS_OF_EVENTS;
|
|
rc->rc_flags &= ~RC_DOXXFER;
|
|
rc->rc_tp.t_state &= ~TS_BUSY;
|
|
critical_exit();
|
|
(*linesw[tp->t_line].l_start)(tp);
|
|
}
|
|
if (sc->sc_scheduled_event == 0)
|
|
break;
|
|
}
|
|
} while (sc->sc_scheduled_event >= LOTS_OF_EVENTS);
|
|
}
|
|
|
|
static void
|
|
rc_stop(struct tty *tp, int rw)
|
|
{
|
|
struct rc_softc *sc;
|
|
struct rc_chans *rc;
|
|
u_char *tptr, *eptr;
|
|
|
|
rc = TTY_TO_RC(tp);
|
|
sc = rc->rc_rcb;
|
|
#ifdef RCDEBUG
|
|
device_printf(sc->sc_dev, "channel %d: rc_stop %s%s\n",
|
|
rc->rc_chan, (rw & FWRITE)?"FWRITE ":"", (rw & FREAD)?"FREAD":"");
|
|
#endif
|
|
if (rw & FWRITE)
|
|
rc_discard_output(rc);
|
|
critical_enter();
|
|
if (rw & FREAD) {
|
|
rc->rc_flags &= ~RC_DORXFER;
|
|
eptr = rc->rc_iptr;
|
|
if (rc->rc_bufend == &rc->rc_ibuf[2 * RC_IBUFSIZE]) {
|
|
tptr = &rc->rc_ibuf[RC_IBUFSIZE];
|
|
rc->rc_iptr = &rc->rc_ibuf[RC_IBUFSIZE];
|
|
} else {
|
|
tptr = rc->rc_ibuf;
|
|
rc->rc_iptr = rc->rc_ibuf;
|
|
}
|
|
sc->sc_scheduled_event -= eptr - tptr;
|
|
}
|
|
if (tp->t_state & TS_TTSTOP)
|
|
rc->rc_flags |= RC_OSUSP;
|
|
else
|
|
rc->rc_flags &= ~RC_OSUSP;
|
|
critical_exit();
|
|
}
|
|
|
|
static int
|
|
rcopen(dev_t dev, int flag, int mode, d_thread_t *td)
|
|
{
|
|
struct rc_softc *sc;
|
|
struct rc_chans *rc;
|
|
struct tty *tp;
|
|
int s, error = 0;
|
|
|
|
rc = DEV_TO_RC(dev);
|
|
sc = rc->rc_rcb;
|
|
tp = &rc->rc_tp;
|
|
if (sc->sc_opencount < 0)
|
|
return (ENXIO);
|
|
sc->sc_opencount++;
|
|
#ifdef RCDEBUG
|
|
device_printf(sc->sc_dev, "channel %d: rcopen: dev %p\n",
|
|
rc->rc_chan, dev);
|
|
#endif
|
|
s = spltty();
|
|
|
|
again:
|
|
while (rc->rc_flags & RC_DTR_OFF) {
|
|
error = tsleep(&(rc->rc_dtrwait), TTIPRI | PCATCH, "rcdtr", 0);
|
|
if (error != 0)
|
|
goto out;
|
|
}
|
|
if (tp->t_state & TS_ISOPEN) {
|
|
if (CALLOUT(dev)) {
|
|
if (!(rc->rc_flags & RC_ACTOUT)) {
|
|
error = EBUSY;
|
|
goto out;
|
|
}
|
|
} else {
|
|
if (rc->rc_flags & RC_ACTOUT) {
|
|
if (flag & O_NONBLOCK) {
|
|
error = EBUSY;
|
|
goto out;
|
|
}
|
|
error = tsleep(&rc->rc_rcb,
|
|
TTIPRI|PCATCH, "rcbi", 0);
|
|
if (error)
|
|
goto out;
|
|
goto again;
|
|
}
|
|
}
|
|
if (tp->t_state & TS_XCLUDE &&
|
|
suser(td)) {
|
|
error = EBUSY;
|
|
goto out;
|
|
}
|
|
} else {
|
|
tp->t_oproc = rc_start;
|
|
tp->t_param = rc_param;
|
|
tp->t_stop = rc_stop;
|
|
tp->t_dev = dev;
|
|
|
|
if (CALLOUT(dev))
|
|
tp->t_cflag |= CLOCAL;
|
|
else
|
|
tp->t_cflag &= ~CLOCAL;
|
|
|
|
error = rc_param(tp, &tp->t_termios);
|
|
if (error)
|
|
goto out;
|
|
(void) rc_modctl(rc, TIOCM_RTS|TIOCM_DTR, DMSET);
|
|
|
|
if ((rc->rc_msvr & MSVR_CD) || CALLOUT(dev))
|
|
(*linesw[tp->t_line].l_modem)(tp, 1);
|
|
}
|
|
if (!(tp->t_state & TS_CARR_ON) && !CALLOUT(dev)
|
|
&& !(tp->t_cflag & CLOCAL) && !(flag & O_NONBLOCK)) {
|
|
rc->rc_dcdwaits++;
|
|
error = tsleep(TSA_CARR_ON(tp), TTIPRI | PCATCH, "rcdcd", 0);
|
|
rc->rc_dcdwaits--;
|
|
if (error != 0)
|
|
goto out;
|
|
goto again;
|
|
}
|
|
error = (*linesw[tp->t_line].l_open)(dev, tp);
|
|
disc_optim(tp, &tp->t_termios, rc);
|
|
if ((tp->t_state & TS_ISOPEN) && CALLOUT(dev))
|
|
rc->rc_flags |= RC_ACTOUT;
|
|
out:
|
|
(void) splx(s);
|
|
|
|
if(rc->rc_dcdwaits == 0 && !(tp->t_state & TS_ISOPEN))
|
|
rc_hardclose(rc);
|
|
|
|
return error;
|
|
}
|
|
|
|
static int
|
|
rcclose(dev_t dev, int flag, int mode, d_thread_t *td)
|
|
{
|
|
struct rc_softc *sc;
|
|
struct rc_chans *rc;
|
|
struct tty *tp;
|
|
int s;
|
|
|
|
rc = DEV_TO_RC(dev);
|
|
sc = rc->rc_rcb;
|
|
tp = &rc->rc_tp;
|
|
#ifdef RCDEBUG
|
|
device_printf(sc->sc_dev, "channel %d: rcclose dev %p\n",
|
|
rc->rc_chan, dev);
|
|
#endif
|
|
s = spltty();
|
|
(*linesw[tp->t_line].l_close)(tp, flag);
|
|
disc_optim(tp, &tp->t_termios, rc);
|
|
rc_stop(tp, FREAD | FWRITE);
|
|
rc_hardclose(rc);
|
|
ttyclose(tp);
|
|
splx(s);
|
|
KASSERT(sc->sc_opencount > 0, ("rcclose: non-positive open count"));
|
|
sc->sc_opencount--;
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
rc_hardclose(struct rc_chans *rc)
|
|
{
|
|
struct rc_softc *sc;
|
|
struct tty *tp;
|
|
int s;
|
|
|
|
tp = &rc->rc_tp;
|
|
sc = rc->rc_rcb;
|
|
s = spltty();
|
|
rcout(sc, CD180_CAR, rc->rc_chan);
|
|
|
|
/* Disable rx/tx intrs */
|
|
rcout(sc, CD180_IER, rc->rc_ier = 0);
|
|
if ( (tp->t_cflag & HUPCL)
|
|
|| (!(rc->rc_flags & RC_ACTOUT)
|
|
&& !(rc->rc_msvr & MSVR_CD)
|
|
&& !(tp->t_cflag & CLOCAL))
|
|
|| !(tp->t_state & TS_ISOPEN)
|
|
) {
|
|
CCRCMD(sc, rc->rc_chan, CCR_ResetChan);
|
|
WAITFORCCR(sc, rc->rc_chan);
|
|
(void) rc_modctl(rc, TIOCM_RTS, DMSET);
|
|
if (rc->rc_dtrwait) {
|
|
callout_reset(&rc->rc_dtrcallout, rc->rc_dtrwait,
|
|
rc_dtrwakeup, rc);
|
|
rc->rc_flags |= RC_DTR_OFF;
|
|
}
|
|
}
|
|
rc->rc_flags &= ~RC_ACTOUT;
|
|
wakeup( &rc->rc_rcb); /* wake bi */
|
|
wakeup(TSA_CARR_ON(tp));
|
|
(void) splx(s);
|
|
}
|
|
|
|
/* Reset the bastard */
|
|
static void
|
|
rc_hwreset(struct rc_softc *sc, u_int chipid)
|
|
{
|
|
CCRCMD(sc, -1, CCR_HWRESET); /* Hardware reset */
|
|
DELAY(20000);
|
|
WAITFORCCR(sc, -1);
|
|
|
|
rcout(sc, RC_CTOUT, 0); /* Clear timeout */
|
|
rcout(sc, CD180_GIVR, chipid);
|
|
rcout(sc, CD180_GICR, 0);
|
|
|
|
/* Set Prescaler Registers (1 msec) */
|
|
rcout(sc, CD180_PPRL, ((RC_OSCFREQ + 999) / 1000) & 0xFF);
|
|
rcout(sc, CD180_PPRH, ((RC_OSCFREQ + 999) / 1000) >> 8);
|
|
|
|
/* Initialize Priority Interrupt Level Registers */
|
|
rcout(sc, CD180_PILR1, RC_PILR_MODEM);
|
|
rcout(sc, CD180_PILR2, RC_PILR_TX);
|
|
rcout(sc, CD180_PILR3, RC_PILR_RX);
|
|
|
|
/* Reset DTR */
|
|
rcout(sc, RC_DTREG, ~0);
|
|
}
|
|
|
|
/* Set channel parameters */
|
|
static int
|
|
rc_param(struct tty *tp, struct termios *ts)
|
|
{
|
|
struct rc_softc *sc;
|
|
struct rc_chans *rc;
|
|
int idivs, odivs, s, val, cflag, iflag, lflag, inpflow;
|
|
|
|
if ( ts->c_ospeed < 0 || ts->c_ospeed > 76800
|
|
|| ts->c_ispeed < 0 || ts->c_ispeed > 76800
|
|
)
|
|
return (EINVAL);
|
|
if (ts->c_ispeed == 0)
|
|
ts->c_ispeed = ts->c_ospeed;
|
|
odivs = RC_BRD(ts->c_ospeed);
|
|
idivs = RC_BRD(ts->c_ispeed);
|
|
|
|
rc = TTY_TO_RC(tp);
|
|
sc = rc->rc_rcb;
|
|
s = spltty();
|
|
|
|
/* Select channel */
|
|
rcout(sc, CD180_CAR, rc->rc_chan);
|
|
|
|
/* If speed == 0, hangup line */
|
|
if (ts->c_ospeed == 0) {
|
|
CCRCMD(sc, rc->rc_chan, CCR_ResetChan);
|
|
WAITFORCCR(sc, rc->rc_chan);
|
|
(void) rc_modctl(rc, TIOCM_DTR, DMBIC);
|
|
}
|
|
|
|
tp->t_state &= ~TS_CAN_BYPASS_L_RINT;
|
|
cflag = ts->c_cflag;
|
|
iflag = ts->c_iflag;
|
|
lflag = ts->c_lflag;
|
|
|
|
if (idivs > 0) {
|
|
rcout(sc, CD180_RBPRL, idivs & 0xFF);
|
|
rcout(sc, CD180_RBPRH, idivs >> 8);
|
|
}
|
|
if (odivs > 0) {
|
|
rcout(sc, CD180_TBPRL, odivs & 0xFF);
|
|
rcout(sc, CD180_TBPRH, odivs >> 8);
|
|
}
|
|
|
|
/* set timeout value */
|
|
if (ts->c_ispeed > 0) {
|
|
int itm = ts->c_ispeed > 2400 ? 5 : 10000 / ts->c_ispeed + 1;
|
|
|
|
if ( !(lflag & ICANON)
|
|
&& ts->c_cc[VMIN] != 0 && ts->c_cc[VTIME] != 0
|
|
&& ts->c_cc[VTIME] * 10 > itm)
|
|
itm = ts->c_cc[VTIME] * 10;
|
|
|
|
rcout(sc, CD180_RTPR, itm <= 255 ? itm : 255);
|
|
}
|
|
|
|
switch (cflag & CSIZE) {
|
|
case CS5: val = COR1_5BITS; break;
|
|
case CS6: val = COR1_6BITS; break;
|
|
case CS7: val = COR1_7BITS; break;
|
|
default:
|
|
case CS8: val = COR1_8BITS; break;
|
|
}
|
|
if (cflag & PARENB) {
|
|
val |= COR1_NORMPAR;
|
|
if (cflag & PARODD)
|
|
val |= COR1_ODDP;
|
|
if (!(cflag & INPCK))
|
|
val |= COR1_Ignore;
|
|
} else
|
|
val |= COR1_Ignore;
|
|
if (cflag & CSTOPB)
|
|
val |= COR1_2SB;
|
|
rcout(sc, CD180_COR1, val);
|
|
|
|
/* Set FIFO threshold */
|
|
val = ts->c_ospeed <= 4800 ? 1 : CD180_NFIFO / 2;
|
|
inpflow = 0;
|
|
if ( (iflag & IXOFF)
|
|
&& ( ts->c_cc[VSTOP] != _POSIX_VDISABLE
|
|
&& ( ts->c_cc[VSTART] != _POSIX_VDISABLE
|
|
|| (iflag & IXANY)
|
|
)
|
|
)
|
|
) {
|
|
inpflow = 1;
|
|
val |= COR3_SCDE|COR3_FCT;
|
|
}
|
|
rcout(sc, CD180_COR3, val);
|
|
|
|
/* Initialize on-chip automatic flow control */
|
|
val = 0;
|
|
rc->rc_flags &= ~(RC_CTSFLOW|RC_SEND_RDY);
|
|
if (cflag & CCTS_OFLOW) {
|
|
rc->rc_flags |= RC_CTSFLOW;
|
|
val |= COR2_CtsAE;
|
|
} else
|
|
rc->rc_flags |= RC_SEND_RDY;
|
|
if (tp->t_state & TS_TTSTOP)
|
|
rc->rc_flags |= RC_OSUSP;
|
|
else
|
|
rc->rc_flags &= ~RC_OSUSP;
|
|
if (cflag & CRTS_IFLOW)
|
|
rc->rc_flags |= RC_RTSFLOW;
|
|
else
|
|
rc->rc_flags &= ~RC_RTSFLOW;
|
|
|
|
if (inpflow) {
|
|
if (ts->c_cc[VSTART] != _POSIX_VDISABLE)
|
|
rcout(sc, CD180_SCHR1, ts->c_cc[VSTART]);
|
|
rcout(sc, CD180_SCHR2, ts->c_cc[VSTOP]);
|
|
val |= COR2_TxIBE;
|
|
if (iflag & IXANY)
|
|
val |= COR2_IXM;
|
|
}
|
|
|
|
rcout(sc, CD180_COR2, rc->rc_cor2 = val);
|
|
|
|
CCRCMD(sc, rc->rc_chan, CCR_CORCHG1 | CCR_CORCHG2 | CCR_CORCHG3);
|
|
|
|
disc_optim(tp, ts, rc);
|
|
|
|
/* modem ctl */
|
|
val = cflag & CLOCAL ? 0 : MCOR1_CDzd;
|
|
if (cflag & CCTS_OFLOW)
|
|
val |= MCOR1_CTSzd;
|
|
rcout(sc, CD180_MCOR1, val);
|
|
|
|
val = cflag & CLOCAL ? 0 : MCOR2_CDod;
|
|
if (cflag & CCTS_OFLOW)
|
|
val |= MCOR2_CTSod;
|
|
rcout(sc, CD180_MCOR2, val);
|
|
|
|
/* enable i/o and interrupts */
|
|
CCRCMD(sc, rc->rc_chan,
|
|
CCR_XMTREN | ((cflag & CREAD) ? CCR_RCVREN : CCR_RCVRDIS));
|
|
WAITFORCCR(sc, rc->rc_chan);
|
|
|
|
rc->rc_ier = cflag & CLOCAL ? 0 : IER_CD;
|
|
if (cflag & CCTS_OFLOW)
|
|
rc->rc_ier |= IER_CTS;
|
|
if (cflag & CREAD)
|
|
rc->rc_ier |= IER_RxData;
|
|
if (tp->t_state & TS_BUSY)
|
|
rc->rc_ier |= IER_TxRdy;
|
|
if (ts->c_ospeed != 0)
|
|
rc_modctl(rc, TIOCM_DTR, DMBIS);
|
|
if ((cflag & CCTS_OFLOW) && (rc->rc_msvr & MSVR_CTS))
|
|
rc->rc_flags |= RC_SEND_RDY;
|
|
rcout(sc, CD180_IER, rc->rc_ier);
|
|
(void) splx(s);
|
|
return 0;
|
|
}
|
|
|
|
/* Re-initialize board after bogus interrupts */
|
|
static void
|
|
rc_reinit(struct rc_softc *sc)
|
|
{
|
|
struct rc_chans *rc;
|
|
int i;
|
|
|
|
rc_hwreset(sc, RC_FAKEID);
|
|
rc = sc->sc_channels;
|
|
for (i = 0; i < CD180_NCHAN; i++, rc++)
|
|
(void) rc_param(&rc->rc_tp, &rc->rc_tp.t_termios);
|
|
}
|
|
|
|
static int
|
|
rcioctl(dev_t dev, u_long cmd, caddr_t data, int flag, d_thread_t *td)
|
|
{
|
|
struct rc_chans *rc;
|
|
struct tty *tp;
|
|
int s, error;
|
|
|
|
rc = DEV_TO_RC(dev);
|
|
tp = &rc->rc_tp;
|
|
error = (*linesw[tp->t_line].l_ioctl)(tp, cmd, data, flag, td);
|
|
if (error != ENOIOCTL)
|
|
return (error);
|
|
error = ttioctl(tp, cmd, data, flag);
|
|
disc_optim(tp, &tp->t_termios, rc);
|
|
if (error != ENOIOCTL)
|
|
return (error);
|
|
s = spltty();
|
|
|
|
switch (cmd) {
|
|
case TIOCSBRK:
|
|
rc->rc_pendcmd = CD180_C_SBRK;
|
|
break;
|
|
|
|
case TIOCCBRK:
|
|
rc->rc_pendcmd = CD180_C_EBRK;
|
|
break;
|
|
|
|
case TIOCSDTR:
|
|
(void) rc_modctl(rc, TIOCM_DTR, DMBIS);
|
|
break;
|
|
|
|
case TIOCCDTR:
|
|
(void) rc_modctl(rc, TIOCM_DTR, DMBIC);
|
|
break;
|
|
|
|
case TIOCMGET:
|
|
*(int *) data = rc_modctl(rc, 0, DMGET);
|
|
break;
|
|
|
|
case TIOCMSET:
|
|
(void) rc_modctl(rc, *(int *) data, DMSET);
|
|
break;
|
|
|
|
case TIOCMBIC:
|
|
(void) rc_modctl(rc, *(int *) data, DMBIC);
|
|
break;
|
|
|
|
case TIOCMBIS:
|
|
(void) rc_modctl(rc, *(int *) data, DMBIS);
|
|
break;
|
|
|
|
case TIOCMSDTRWAIT:
|
|
error = suser(td);
|
|
if (error != 0) {
|
|
splx(s);
|
|
return (error);
|
|
}
|
|
rc->rc_dtrwait = *(int *)data * hz / 100;
|
|
break;
|
|
|
|
case TIOCMGDTRWAIT:
|
|
*(int *)data = rc->rc_dtrwait * 100 / hz;
|
|
break;
|
|
|
|
default:
|
|
(void) splx(s);
|
|
return ENOTTY;
|
|
}
|
|
(void) splx(s);
|
|
return 0;
|
|
}
|
|
|
|
|
|
/* Modem control routines */
|
|
|
|
static int
|
|
rc_modctl(struct rc_chans *rc, int bits, int cmd)
|
|
{
|
|
struct rc_softc *sc;
|
|
u_char *dtr;
|
|
u_char msvr;
|
|
|
|
sc = rc->rc_rcb;
|
|
dtr = &sc->sc_dtr;
|
|
rcout(sc, CD180_CAR, rc->rc_chan);
|
|
|
|
switch (cmd) {
|
|
case DMSET:
|
|
rcout(sc, RC_DTREG, (bits & TIOCM_DTR) ?
|
|
~(*dtr |= 1 << rc->rc_chan) :
|
|
~(*dtr &= ~(1 << rc->rc_chan)));
|
|
msvr = rcin(sc, CD180_MSVR);
|
|
if (bits & TIOCM_RTS)
|
|
msvr |= MSVR_RTS;
|
|
else
|
|
msvr &= ~MSVR_RTS;
|
|
if (bits & TIOCM_DTR)
|
|
msvr |= MSVR_DTR;
|
|
else
|
|
msvr &= ~MSVR_DTR;
|
|
rcout(sc, CD180_MSVR, msvr);
|
|
break;
|
|
|
|
case DMBIS:
|
|
if (bits & TIOCM_DTR)
|
|
rcout(sc, RC_DTREG, ~(*dtr |= 1 << rc->rc_chan));
|
|
msvr = rcin(sc, CD180_MSVR);
|
|
if (bits & TIOCM_RTS)
|
|
msvr |= MSVR_RTS;
|
|
if (bits & TIOCM_DTR)
|
|
msvr |= MSVR_DTR;
|
|
rcout(sc, CD180_MSVR, msvr);
|
|
break;
|
|
|
|
case DMGET:
|
|
bits = TIOCM_LE;
|
|
msvr = rc->rc_msvr = rcin(sc, CD180_MSVR);
|
|
|
|
if (msvr & MSVR_RTS)
|
|
bits |= TIOCM_RTS;
|
|
if (msvr & MSVR_CTS)
|
|
bits |= TIOCM_CTS;
|
|
if (msvr & MSVR_DSR)
|
|
bits |= TIOCM_DSR;
|
|
if (msvr & MSVR_DTR)
|
|
bits |= TIOCM_DTR;
|
|
if (msvr & MSVR_CD)
|
|
bits |= TIOCM_CD;
|
|
if (~rcin(sc, RC_RIREG) & (1 << rc->rc_chan))
|
|
bits |= TIOCM_RI;
|
|
return bits;
|
|
|
|
case DMBIC:
|
|
if (bits & TIOCM_DTR)
|
|
rcout(sc, RC_DTREG, ~(*dtr &= ~(1 << rc->rc_chan)));
|
|
msvr = rcin(sc, CD180_MSVR);
|
|
if (bits & TIOCM_RTS)
|
|
msvr &= ~MSVR_RTS;
|
|
if (bits & TIOCM_DTR)
|
|
msvr &= ~MSVR_DTR;
|
|
rcout(sc, CD180_MSVR, msvr);
|
|
break;
|
|
}
|
|
rc->rc_msvr = rcin(sc, CD180_MSVR);
|
|
return 0;
|
|
}
|
|
|
|
#define ERR(s) do { \
|
|
device_printf(sc->sc_dev, "%s", ""); \
|
|
printf s ; \
|
|
printf("\n"); \
|
|
(void) splx(old_level); \
|
|
return 1; \
|
|
} while (0)
|
|
|
|
/* Test the board. */
|
|
int
|
|
rc_test(struct rc_softc *sc)
|
|
{
|
|
int chan = 0;
|
|
int i = 0, rcnt, old_level;
|
|
unsigned int iack, chipid;
|
|
unsigned short divs;
|
|
static u_char ctest[] = "\377\125\252\045\244\0\377";
|
|
#define CTLEN 8
|
|
|
|
struct rtest {
|
|
u_char txbuf[CD180_NFIFO]; /* TX buffer */
|
|
u_char rxbuf[CD180_NFIFO]; /* RX buffer */
|
|
int rxptr; /* RX pointer */
|
|
int txptr; /* TX pointer */
|
|
} tchans[CD180_NCHAN];
|
|
|
|
old_level = spltty();
|
|
|
|
chipid = RC_FAKEID;
|
|
|
|
/* First, reset board to inital state */
|
|
rc_hwreset(sc, chipid);
|
|
|
|
divs = RC_BRD(19200);
|
|
|
|
/* Initialize channels */
|
|
for (chan = 0; chan < CD180_NCHAN; chan++) {
|
|
|
|
/* Select and reset channel */
|
|
rcout(sc, CD180_CAR, chan);
|
|
CCRCMD(sc, chan, CCR_ResetChan);
|
|
WAITFORCCR(sc, chan);
|
|
|
|
/* Set speed */
|
|
rcout(sc, CD180_RBPRL, divs & 0xFF);
|
|
rcout(sc, CD180_RBPRH, divs >> 8);
|
|
rcout(sc, CD180_TBPRL, divs & 0xFF);
|
|
rcout(sc, CD180_TBPRH, divs >> 8);
|
|
|
|
/* set timeout value */
|
|
rcout(sc, CD180_RTPR, 0);
|
|
|
|
/* Establish local loopback */
|
|
rcout(sc, CD180_COR1, COR1_NOPAR | COR1_8BITS | COR1_1SB);
|
|
rcout(sc, CD180_COR2, COR2_LLM);
|
|
rcout(sc, CD180_COR3, CD180_NFIFO);
|
|
CCRCMD(sc, chan, CCR_CORCHG1 | CCR_CORCHG2 | CCR_CORCHG3);
|
|
CCRCMD(sc, chan, CCR_RCVREN | CCR_XMTREN);
|
|
WAITFORCCR(sc, chan);
|
|
rcout(sc, CD180_MSVR, MSVR_RTS);
|
|
|
|
/* Fill TXBUF with test data */
|
|
for (i = 0; i < CD180_NFIFO; i++) {
|
|
tchans[chan].txbuf[i] = ctest[i];
|
|
tchans[chan].rxbuf[i] = 0;
|
|
}
|
|
tchans[chan].txptr = tchans[chan].rxptr = 0;
|
|
|
|
/* Now, start transmit */
|
|
rcout(sc, CD180_IER, IER_TxMpty|IER_RxData);
|
|
}
|
|
/* Pseudo-interrupt poll stuff */
|
|
for (rcnt = 10000; rcnt-- > 0; rcnt--) {
|
|
i = ~(rcin(sc, RC_BSR));
|
|
if (i & RC_BSR_TOUT)
|
|
ERR(("BSR timeout bit set\n"));
|
|
else if (i & RC_BSR_TXINT) {
|
|
iack = rcin(sc, RC_PILR_TX);
|
|
if (iack != (GIVR_IT_TDI | chipid))
|
|
ERR(("Bad TX intr ack (%02x != %02x)\n",
|
|
iack, GIVR_IT_TDI | chipid));
|
|
chan = (rcin(sc, CD180_GICR) & GICR_CHAN) >> GICR_LSH;
|
|
/* If no more data to transmit, disable TX intr */
|
|
if (tchans[chan].txptr >= CD180_NFIFO) {
|
|
iack = rcin(sc, CD180_IER);
|
|
rcout(sc, CD180_IER, iack & ~IER_TxMpty);
|
|
} else {
|
|
for (iack = tchans[chan].txptr;
|
|
iack < CD180_NFIFO; iack++)
|
|
rcout(sc, CD180_TDR,
|
|
tchans[chan].txbuf[iack]);
|
|
tchans[chan].txptr = iack;
|
|
}
|
|
rcout(sc, CD180_EOIR, 0);
|
|
} else if (i & RC_BSR_RXINT) {
|
|
u_char ucnt;
|
|
|
|
iack = rcin(sc, RC_PILR_RX);
|
|
if (iack != (GIVR_IT_RGDI | chipid) &&
|
|
iack != (GIVR_IT_REI | chipid))
|
|
ERR(("Bad RX intr ack (%02x != %02x)\n",
|
|
iack, GIVR_IT_RGDI | chipid));
|
|
chan = (rcin(sc, CD180_GICR) & GICR_CHAN) >> GICR_LSH;
|
|
ucnt = rcin(sc, CD180_RDCR) & 0xF;
|
|
while (ucnt-- > 0) {
|
|
iack = rcin(sc, CD180_RCSR);
|
|
if (iack & RCSR_Timeout)
|
|
break;
|
|
if (iack & 0xF)
|
|
ERR(("Bad char chan %d (RCSR = %02X)\n",
|
|
chan, iack));
|
|
if (tchans[chan].rxptr > CD180_NFIFO)
|
|
ERR(("Got extra chars chan %d\n",
|
|
chan));
|
|
tchans[chan].rxbuf[tchans[chan].rxptr++] =
|
|
rcin(sc, CD180_RDR);
|
|
}
|
|
rcout(sc, CD180_EOIR, 0);
|
|
}
|
|
rcout(sc, RC_CTOUT, 0);
|
|
for (iack = chan = 0; chan < CD180_NCHAN; chan++)
|
|
if (tchans[chan].rxptr >= CD180_NFIFO)
|
|
iack++;
|
|
if (iack == CD180_NCHAN)
|
|
break;
|
|
}
|
|
for (chan = 0; chan < CD180_NCHAN; chan++) {
|
|
/* Select and reset channel */
|
|
rcout(sc, CD180_CAR, chan);
|
|
CCRCMD(sc, chan, CCR_ResetChan);
|
|
}
|
|
|
|
if (!rcnt)
|
|
ERR(("looses characters during local loopback\n"));
|
|
/* Now, check data */
|
|
for (chan = 0; chan < CD180_NCHAN; chan++)
|
|
for (i = 0; i < CD180_NFIFO; i++)
|
|
if (ctest[i] != tchans[chan].rxbuf[i])
|
|
ERR(("data mismatch chan %d ptr %d (%d != %d)\n",
|
|
chan, i, ctest[i], tchans[chan].rxbuf[i]));
|
|
(void) splx(old_level);
|
|
return 0;
|
|
}
|
|
|
|
#ifdef RCDEBUG
|
|
static void
|
|
printrcflags(struct rc_chans *rc, char *comment)
|
|
{
|
|
struct rc_softc *sc;
|
|
u_short f = rc->rc_flags;
|
|
|
|
sc = rc->rc_rcb;
|
|
printf("rc%d/%d: %s flags: %s%s%s%s%s%s%s%s%s%s%s%s\n",
|
|
rc->rc_rcb->rcb_unit, rc->rc_chan, comment,
|
|
(f & RC_DTR_OFF)?"DTR_OFF " :"",
|
|
(f & RC_ACTOUT) ?"ACTOUT " :"",
|
|
(f & RC_RTSFLOW)?"RTSFLOW " :"",
|
|
(f & RC_CTSFLOW)?"CTSFLOW " :"",
|
|
(f & RC_DORXFER)?"DORXFER " :"",
|
|
(f & RC_DOXXFER)?"DOXXFER " :"",
|
|
(f & RC_MODCHG) ?"MODCHG " :"",
|
|
(f & RC_OSUSP) ?"OSUSP " :"",
|
|
(f & RC_OSBUSY) ?"OSBUSY " :"",
|
|
(f & RC_WAS_BUFOVFL) ?"BUFOVFL " :"",
|
|
(f & RC_WAS_SILOVFL) ?"SILOVFL " :"",
|
|
(f & RC_SEND_RDY) ?"SEND_RDY":"");
|
|
|
|
rcout(sc, CD180_CAR, rc->rc_chan);
|
|
|
|
printf("rc%d/%d: msvr %02x ier %02x ccsr %02x\n",
|
|
rc->rc_rcb->rcb_unit, rc->rc_chan,
|
|
rcin(sc, CD180_MSVR),
|
|
rcin(sc, CD180_IER),
|
|
rcin(sc, CD180_CCSR));
|
|
}
|
|
#endif /* RCDEBUG */
|
|
|
|
static void
|
|
rc_dtrwakeup(void *arg)
|
|
{
|
|
struct rc_chans *rc;
|
|
|
|
rc = (struct rc_chans *)arg;
|
|
rc->rc_flags &= ~RC_DTR_OFF;
|
|
wakeup(&rc->rc_dtrwait);
|
|
}
|
|
|
|
static void
|
|
rc_discard_output(struct rc_chans *rc)
|
|
{
|
|
critical_enter();
|
|
if (rc->rc_flags & RC_DOXXFER) {
|
|
rc->rc_rcb->sc_scheduled_event -= LOTS_OF_EVENTS;
|
|
rc->rc_flags &= ~RC_DOXXFER;
|
|
}
|
|
rc->rc_optr = rc->rc_obufend;
|
|
rc->rc_tp.t_state &= ~TS_BUSY;
|
|
critical_exit();
|
|
ttwwakeup(&rc->rc_tp);
|
|
}
|
|
|
|
static void
|
|
disc_optim(struct tty *tp, struct termios *t, struct rc_chans *rc)
|
|
{
|
|
|
|
if (!(t->c_iflag & (ICRNL | IGNCR | IMAXBEL | INLCR | ISTRIP | IXON))
|
|
&& (!(t->c_iflag & BRKINT) || (t->c_iflag & IGNBRK))
|
|
&& (!(t->c_iflag & PARMRK)
|
|
|| (t->c_iflag & (IGNPAR | IGNBRK)) == (IGNPAR | IGNBRK))
|
|
&& !(t->c_lflag & (ECHO | ICANON | IEXTEN | ISIG | PENDIN))
|
|
&& linesw[tp->t_line].l_rint == ttyinput)
|
|
tp->t_state |= TS_CAN_BYPASS_L_RINT;
|
|
else
|
|
tp->t_state &= ~TS_CAN_BYPASS_L_RINT;
|
|
rc->rc_hotchar = linesw[tp->t_line].l_hotchar;
|
|
}
|
|
|
|
static void
|
|
rc_wait0(struct rc_softc *sc, int chan, int line)
|
|
{
|
|
int rcnt;
|
|
|
|
for (rcnt = 50; rcnt && rcin(sc, CD180_CCR); rcnt--)
|
|
DELAY(30);
|
|
if (rcnt == 0)
|
|
device_printf(sc->sc_dev,
|
|
"channel %d command timeout, rc.c line: %d\n", chan, line);
|
|
}
|
|
|
|
static device_method_t rc_methods[] = {
|
|
/* Device interface */
|
|
DEVMETHOD(device_probe, rc_probe),
|
|
DEVMETHOD(device_attach, rc_attach),
|
|
DEVMETHOD(device_detach, rc_detach),
|
|
{ 0, 0 }
|
|
};
|
|
|
|
static driver_t rc_driver = {
|
|
"rc",
|
|
rc_methods, sizeof(struct rc_softc),
|
|
};
|
|
|
|
DRIVER_MODULE(rc, isa, rc_driver, rc_devclass, 0, 0);
|