1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-12 09:58:36 +00:00
freebsd/sys/mips/mediatek/mtk_dotg.c
Andrew Turner 518da7ace8 Add dwc_otg_acpi
Create an acpi attachment for the DWC USB OTG device. This is present in
the Raspberry Pi 4 in the USB-C port normally used to power the board. Some
firmware presents the kernel with ACPI tables rather than FDT so we need
an ACPI attachment.

Submitted by:	Greg V <greg_unrelenting.technology>
Approved by:	hselasky (removal of All rights reserved)
Differential Revision:	https://reviews.freebsd.org/D25203
2020-06-30 15:58:29 +00:00

194 lines
5.0 KiB
C

#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
/*-
* Copyright (c) 2015-2016 Stanislav Galabov. All rights reserved.
* Copyright (c) 2010,2011 Aleksandr Rybalko. All rights reserved.
* Copyright (c) 2007-2008 Hans Petter Selasky. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/stdint.h>
#include <sys/stddef.h>
#include <sys/param.h>
#include <sys/queue.h>
#include <sys/types.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/bus.h>
#include <sys/module.h>
#include <sys/lock.h>
#include <sys/mutex.h>
#include <sys/condvar.h>
#include <sys/sysctl.h>
#include <sys/sx.h>
#include <sys/unistd.h>
#include <sys/callout.h>
#include <sys/malloc.h>
#include <sys/priv.h>
#include <sys/rman.h>
#include <dev/usb/usb.h>
#include <dev/usb/usbdi.h>
#include <dev/usb/usb_core.h>
#include <dev/usb/usb_busdma.h>
#include <dev/usb/usb_process.h>
#include <dev/usb/usb_util.h>
#include <dev/usb/usb_controller.h>
#include <dev/usb/usb_bus.h>
#include <dev/usb/controller/dwc_otg.h>
#include <dev/ofw/openfirm.h>
#include <dev/ofw/ofw_bus.h>
#include <dev/ofw/ofw_bus_subr.h>
#define MEM_RID 0
static device_probe_t dotg_fdt_probe;
static device_attach_t dotg_fdt_attach;
static device_detach_t dotg_fdt_detach;
static int
dotg_fdt_probe(device_t dev)
{
if (!ofw_bus_status_okay(dev))
return (ENXIO);
if (!ofw_bus_is_compatible(dev, "ralink,rt3050-otg"))
return (ENXIO);
device_set_desc(dev, "MTK DWC-OTG USB Controller");
return (0);
}
static int
dotg_fdt_attach(device_t dev)
{
struct dwc_otg_softc *sc = device_get_softc(dev);
int err, rid;
/* setup controller interface softc */
/* initialise some bus fields */
sc->sc_mode = DWC_MODE_HOST;
sc->sc_bus.parent = dev;
rid = 0;
sc->sc_io_res =
bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid, RF_ACTIVE);
if (!(sc->sc_io_res)) {
printf("Can`t alloc MEM\n");
goto error;
}
rid = 0;
sc->sc_irq_res = bus_alloc_resource_any(dev, SYS_RES_IRQ,
&rid, RF_ACTIVE);
if (!(sc->sc_irq_res)) {
printf("Can`t alloc IRQ\n");
goto error;
}
sc->sc_bus.bdev = device_add_child(dev, "usbus", -1);
if (!(sc->sc_bus.bdev)) {
printf("Can`t add usbus\n");
goto error;
}
device_set_ivars(sc->sc_bus.bdev, &sc->sc_bus);
err = dwc_otg_init(sc);
if (err) printf("dotg_init fail\n");
if (!err) {
err = device_probe_and_attach(sc->sc_bus.bdev);
if (err) printf("device_probe_and_attach fail %d\n", err);
}
if (err) {
goto error;
}
return (0);
error:
dotg_fdt_detach(dev);
return (ENXIO);
}
static int
dotg_fdt_detach(device_t dev)
{
struct dwc_otg_softc *sc = device_get_softc(dev);
int err;
/* during module unload there are lots of children leftover */
device_delete_children(dev);
if (sc->sc_irq_res && sc->sc_intr_hdl) {
/*
* only call dotg_fdt_uninit() after dotg_fdt_init()
*/
dwc_otg_uninit(sc);
err = bus_teardown_intr(dev, sc->sc_irq_res,
sc->sc_intr_hdl);
sc->sc_intr_hdl = NULL;
}
if (sc->sc_irq_res) {
bus_release_resource(dev, SYS_RES_IRQ, 0,
sc->sc_irq_res);
sc->sc_irq_res = NULL;
}
if (sc->sc_io_res) {
bus_release_resource(dev, SYS_RES_MEMORY, 0,
sc->sc_io_res);
sc->sc_io_res = NULL;
}
usb_bus_mem_free_all(&sc->sc_bus, NULL);
return (0);
}
static device_method_t dotg_fdt_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, dotg_fdt_probe),
DEVMETHOD(device_attach, dotg_fdt_attach),
DEVMETHOD(device_detach, dotg_fdt_detach),
DEVMETHOD(device_suspend, bus_generic_suspend),
DEVMETHOD(device_resume, bus_generic_resume),
DEVMETHOD(device_shutdown, bus_generic_shutdown),
DEVMETHOD_END
};
static driver_t dotg_fdt_driver = {
.name = "dwcotg",
.methods = dotg_fdt_methods,
.size = sizeof(struct dwc_otg_softc),
};
static devclass_t dotg_fdt_devclass;
DRIVER_MODULE(dotg, simplebus, dotg_fdt_driver, dotg_fdt_devclass, 0, 0);