mirror/freebsd
1
0
Fork 0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-14 10:09:48 +00:00
Code Issues Releases Activity
9626b608de
freebsd/sys/i386/isa/if_cx.c

826 lines
20 KiB
C
Raw Blame History

/*
* Cronyx-Sigma adapter driver for FreeBSD.
* Supports PPP/HDLC and Cisco/HDLC protocol in synchronous mode,
* and asyncronous channels with full modem control.
* Keepalive protocol implemented in both Cisco and PPP modes.
*
* Copyright (C) 1994 Cronyx Ltd.
* Author: Serge Vakulenko, <vak@zebub.msk.su>
*
* This software is distributed with NO WARRANTIES, not even the implied
* warranties for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
*
* Authors grant any other persons or organisations permission to use
* or modify this software as long as this message is kept with the software,
* all derivative works or modified versions.
*
* Version 1.9, Wed Oct 4 18:58:15 MSK 1995
*
* $FreeBSD$
*
*/
#undef DEBUG
#include "cx.h"
#include "sppp.h"
#if NSPPP <= 0
#error The device 'cx' requires sppp.
#endif
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/malloc.h>
#include <sys/mbuf.h>
#include <sys/sockio.h>
#include <sys/socket.h>
#include <sys/conf.h>
#include <net/if.h>
#include <net/bpf.h>
#include <i386/isa/isa_device.h>
#define watchdog_func_t void(*)(struct ifnet *)
#define start_func_t void(*)(struct ifnet*)
#include <net/if_sppp.h>
#include <machine/cronyx.h>
#include <i386/isa/cxreg.h>
/* XXX exported. */
void cxswitch (cx_chan_t *c, cx_soft_opt_t new);
static int cxprobe __P((struct isa_device *id));
static int cxattach __P((struct isa_device *id));
static void cxput __P((cx_chan_t *c, char b));
static void cxsend __P((cx_chan_t *c));
static void cxrinth __P((cx_chan_t *c));
static ointhand2_t cxintr;
static int cxtinth __P((cx_chan_t *c));
#ifdef DEBUG
# define print(s) printf s
#else
# define print(s) {/*void*/}
#endif
#define TXTIMEOUT 10 /* transmit timeout in seconds */
#define DMABUFSZ (6*256) /* buffer size */
#define PPP_HEADER_LEN 4 /* size of PPP header */
/*
* Under BSDI it's possible to use general p2p protocol scheme,
* as well as our own one. Switching is done via IFF_ALTPHYS flag.
* Our ifnet pointer holds the buffer large enough to contain
* any of sppp and p2p structures.
*/
#define IFSTRUCTSZ (sizeof (struct sppp))
#define IFNETSZ (sizeof (struct ifnet))
static int cxsioctl (struct ifnet *ifp, u_long cmd, caddr_t data);
static void cxstart (struct ifnet *ifp);
static void cxwatchdog (struct ifnet *ifp);
static void cxinput (cx_chan_t *c, void *buf, unsigned len);
extern int cxrinta (cx_chan_t *c);
extern void cxtinta (cx_chan_t *c);
extern void cxmint (cx_chan_t *c);
extern timeout_t cxtimeout;
static void cxdown (cx_chan_t *c);
static void cxup (cx_chan_t *c);
cx_board_t cxboard [NCX]; /* adapter state structures */
cx_chan_t *cxchan [NCX*NCHAN]; /* unit to channel struct pointer */
extern struct cdevsw cx_cdevsw;
static unsigned short irq_valid_values [] = { 3, 5, 7, 10, 11, 12, 15, 0 };
static unsigned short drq_valid_values [] = { 5, 6, 7, 0 };
static unsigned short port_valid_values [] = {
0x240, 0x260, 0x280, 0x300, 0x320, 0x380, 0x3a0, 0,
};
/*
* Check that the value is contained in the list of correct values.
*/
static int valid (unsigned short value, unsigned short *list)
{
while (*list)
if (value == *list++)
return (1);
return (0);
}
/*
* Print the mbuf chain, for debug purposes only.
*/
static void printmbuf (struct mbuf *m)
{
printf ("mbuf:");
for (; m; m=m->m_next) {
if (m->m_flags & M_PKTHDR)
printf (" HDR %d:", m->m_pkthdr.len);
if (m->m_flags & M_EXT)
printf (" EXT:");
printf (" %d", m->m_len);
}
printf ("\n");
}
/*
* Make an mbuf from data.
*/
static struct mbuf *makembuf (void *buf, unsigned len)
{
struct mbuf *m, *o, *p;
MGETHDR (m, M_DONTWAIT, MT_DATA);
if (! m)
return (0);
if (len >= MINCLSIZE)
MCLGET (m, M_DONTWAIT);
m->m_pkthdr.len = len;
m->m_len = 0;
p = m;
while (len) {
unsigned n = M_TRAILINGSPACE (p);
if (n > len)
n = len;
if (! n) {
/* Allocate new mbuf. */
o = p;
MGET (p, M_DONTWAIT, MT_DATA);
if (! p) {
m_freem (m);
return (0);
}
if (len >= MINCLSIZE)
MCLGET (p, M_DONTWAIT);
p->m_len = 0;
o->m_next = p;
n = M_TRAILINGSPACE (p);
if (n > len)
n = len;
}
bcopy (buf, mtod (p, caddr_t) + p->m_len, n);
p->m_len += n;
buf = (char *)buf + n;
len -= n;
}
return (m);
}
/*
* Test the presence of the adapter on the given i/o port.
*/
static int
cxprobe (struct isa_device *id)
{
int unit = id->id_unit;
int iobase = id->id_iobase;
int irq = id->id_irq;
int drq = id->id_drq;
int irqnum;
irqnum = ffs (irq) - 1;
print (("cx%d: probe iobase=0x%x irq=%d drq=%d\n",
unit, iobase, irqnum, drq));
if (! valid (irqnum, irq_valid_values)) {
printf ("cx%d: Incorrect IRQ: %d\n", unit, irqnum);
return (0);
}
if (! valid (iobase, port_valid_values)) {
printf ("cx%d: Incorrect port address: 0x%x\n", unit, iobase);
return (0);
}
if (! valid (drq, drq_valid_values)) {
printf ("cx%d: Incorrect DMA channel: %d\n", unit, drq);
return (0);
}
if (! cx_probe_board (iobase))
return (0);
return (1);
}
/*
* The adapter is present, initialize the driver structures.
*/
static int
cxattach (struct isa_device *id)
{
int unit = id->id_unit;
int iobase = id->id_iobase;
int irq = id->id_irq;
int drq = id->id_drq;
cx_board_t *b = cxboard + unit;
int i;
struct sppp *sp;
id->id_ointr = cxintr;
/* Initialize the board structure. */
cx_init (b, unit, iobase, ffs(irq)-1, drq);
for (i=0; i<NCHAN; ++i) {
cx_chan_t *c = b->chan + i;
int u = b->num*NCHAN + i;
cxchan[u] = c;
if (c->type == T_NONE)
continue;
/* Allocate the buffer memory. */
c->arbuf = malloc (DMABUFSZ, M_DEVBUF, M_NOWAIT);
c->brbuf = malloc (DMABUFSZ, M_DEVBUF, M_NOWAIT);
c->atbuf = malloc (DMABUFSZ, M_DEVBUF, M_NOWAIT);
c->btbuf = malloc (DMABUFSZ, M_DEVBUF, M_NOWAIT);
/* All buffers should be located in lower 16M of memory! */
if (!c->arbuf || !c->brbuf || !c->atbuf || !c->btbuf) {
printf ("cx%d.%d: No memory for channel buffers\n",
c->board->num, c->num);
c->type = T_NONE;
}
switch (c->type) {
case T_SYNC_RS232:
case T_SYNC_V35:
case T_SYNC_RS449:
case T_UNIV_RS232:
case T_UNIV_RS449:
case T_UNIV_V35:
c->ifp = malloc (IFSTRUCTSZ, M_DEVBUF, M_NOWAIT);
if (! c->ifp) {
printf ("cx%d.%d: No memory for ifnet buffer\n",
c->board->num, c->num);
c->type = T_NONE;
continue;
}
bzero (c->ifp, IFSTRUCTSZ);
c->master = c->ifp;
c->ifp->if_softc = c;
c->ifp->if_unit = u;
c->ifp->if_name = "cx";
c->ifp->if_mtu = PP_MTU;
c->ifp->if_flags = IFF_POINTOPOINT | IFF_MULTICAST;
c->ifp->if_ioctl = cxsioctl;
c->ifp->if_start = (start_func_t) cxstart;
c->ifp->if_watchdog = (watchdog_func_t) cxwatchdog;
/* Init routine is never called by upper level? */
sppp_attach (c->ifp);
if_attach (c->ifp);
sp = (struct sppp*) c->ifp;
/* If BPF is in the kernel, call the attach for it. */
bpfattach (c->ifp, DLT_PPP, PPP_HEADER_LEN);
}
}
/* Reset the adapter. */
cx_setup_board (b);
/* Activate the timeout routine. */
if (unit == 0)
timeout (cxtimeout, 0, hz*5);
printf ("cx%d: <Cronyx-%s>\n", unit, b->name);
make_dev(&cx_cdevsw, unit, UID_ROOT, GID_WHEEL, 0600, "cx%d", unit);
return (1);
}
struct isa_driver cxdriver = { cxprobe, cxattach, "cx" };
/*
* Process an ioctl request.
*/
static int
cxsioctl (struct ifnet *ifp, u_long cmd, caddr_t data)
{
cx_chan_t *q, *c = ifp->if_softc;
int error, s, was_up, should_be_up;
/*
* No socket ioctls while the channel is in async mode.
*/
if (c->type==T_NONE || c->mode==M_ASYNC)
return (EINVAL);
/*
* Socket ioctls on slave subchannels are not allowed.
*/
if (c->master != c->ifp)
return (EBUSY);
was_up = (ifp->if_flags & IFF_RUNNING) != 0;
error = sppp_ioctl (ifp, cmd, data);
if (error)
return (error);
print (("cxioctl (%d.%d, ", c->board->num, c->num));
switch (cmd) {
default:
print (("0x%x)\n", cmd));
return (0);
case SIOCADDMULTI:
print (("SIOCADDMULTI)\n"));
return (0);
case SIOCDELMULTI:
print (("SIOCDELMULTI)\n"));
return (0);
case SIOCSIFFLAGS:
print (("SIOCSIFFLAGS)\n"));
break;
case SIOCSIFADDR:
print (("SIOCSIFADDR)\n"));
break;
}
/* We get here only in case of SIFFLAGS or SIFADDR. */
s = splimp ();
should_be_up = (ifp->if_flags & IFF_RUNNING) != 0;
if (!was_up && should_be_up) {
/* Interface goes up -- start it. */
cxup (c);
/* Start all slave subchannels. */
for (q=c->slaveq; q; q=q->slaveq)
cxup (q);
cxstart (c->ifp);
} else if (was_up && !should_be_up) {
/* Interface is going down -- stop it. */
cxdown (c);
/* Stop all slave subchannels. */
for (q=c->slaveq; q; q=q->slaveq)
cxdown (q);
/* Flush the interface output queue */
if (! c->sopt.ext)
sppp_flush (c->ifp);
}
splx (s);
return (0);
}
/*
* Stop the interface. Called on splimp().
*/
static void
cxdown (cx_chan_t *c)
{
unsigned short port = c->chip->port;
print (("cx%d.%d: cxdown\n", c->board->num, c->num));
/* The interface is down, stop it */
c->ifp->if_flags &= ~IFF_OACTIVE;
/* Reset the channel (for sync modes only) */
outb (CAR(port), c->num & 3);
outb (STCR(port), STC_ABORTTX | STC_SNDSPC);
cx_setup_chan (c);
}
/*
* Start the interface. Called on splimp().
*/
static void
cxup (cx_chan_t *c)
{
unsigned short port = c->chip->port;
/* The interface is up, start it */
print (("cx%d.%d: cxup\n", c->board->num, c->num));
/* Initialize channel, enable receiver and transmitter */
cx_cmd (port, CCR_INITCH | CCR_ENRX | CCR_ENTX);
/* Repeat the command, to avoid the rev.H bug */
cx_cmd (port, CCR_INITCH | CCR_ENRX | CCR_ENTX);
/* Start receiver */
outw (ARBCNT(port), DMABUFSZ);
outb (ARBSTS(port), BSTS_OWN24);
outw (BRBCNT(port), DMABUFSZ);
outb (BRBSTS(port), BSTS_OWN24);
/* Raise DTR and RTS */
cx_chan_dtr (c, 1);
cx_chan_rts (c, 1);
/* Enable interrupts */
outb (IER(port), IER_RXD | IER_TXD);
}
/*
* Fill transmitter buffer with data.
*/
static void
cxput (cx_chan_t *c, char b)
{
struct mbuf *m;
unsigned char *buf;
unsigned short port = c->chip->port, len, cnt_port, sts_port;
/* Choose the buffer. */
if (b == 'A') {
buf = c->atbuf;
cnt_port = ATBCNT(port);
sts_port = ATBSTS(port);
} else {
buf = c->btbuf;
cnt_port = BTBCNT(port);
sts_port = BTBSTS(port);
}
/* Is it busy? */
if (inb (sts_port) & BSTS_OWN24) {
if (c->ifp->if_flags & IFF_DEBUG)
print (("cx%d.%d: tbuf %c already busy, bsts=%b\n",
c->board->num, c->num, b,
inb (sts_port), BSTS_BITS));
goto ret;
}
/* Get the packet to send. */
m = sppp_dequeue (c->master);
if (! m)
return;
len = m->m_pkthdr.len;
/* Count the transmitted bytes to the subchannel, not the master. */
c->master->if_obytes -= len + 3;
c->ifp->if_obytes += len + 3;
c->stat->obytes += len + 3;
if (len >= DMABUFSZ) {
printf ("cx%d.%d: too long packet: %d bytes: ",
c->board->num, c->num, len);
printmbuf (m);
m_freem (m);
return;
}
m_copydata (m, 0, len, buf);
if (c->ifp->if_bpf)
bpf_mtap (c->ifp, m);
m_freem (m);
/* Start transmitter. */
outw (cnt_port, len);
outb (sts_port, BSTS_EOFR | BSTS_INTR | BSTS_OWN24);
if (c->ifp->if_flags & IFF_DEBUG)
print (("cx%d.%d: enqueue %d bytes to %c\n",
c->board->num, c->num, len, buf==c->atbuf ? 'A' : 'B'));
ret:
c->ifp->if_flags |= IFF_OACTIVE;
}
/*
* Start output on the (slave) interface. Get another datagram to send
* off of the interface queue, and copy it to the interface
* before starting the output.
*/
static void
cxsend (cx_chan_t *c)
{
unsigned short port = c->chip->port;
if (c->ifp->if_flags & IFF_DEBUG)
print (("cx%d.%d: cxsend\n", c->board->num, c->num));
/* No output if the interface is down. */
if (! (c->ifp->if_flags & IFF_RUNNING))
return;
/* Set the current channel number. */
outb (CAR(port), c->num & 3);
/* Determine the buffer order. */
if (inb (DMABSTS(port)) & DMABSTS_NTBUF) {
cxput (c, 'B');
cxput (c, 'A');
} else {
cxput (c, 'A');
cxput (c, 'B');
}
/* Set up transmit timeout. */
if (c->master->if_flags & IFF_OACTIVE)
c->master->if_timer = TXTIMEOUT;
/*
* Enable TXMPTY interrupt,
* to catch the case when the second buffer is empty.
*/
if ((inb (ATBSTS(port)) & BSTS_OWN24) &&
(inb (BTBSTS(port)) & BSTS_OWN24)) {
outb (IER(port), IER_RXD | IER_TXD | IER_TXMPTY);
} else
outb (IER(port), IER_RXD | IER_TXD);
}
/*
* Start output on the (master) interface and all slave interfaces.
* Always called on splimp().
*/
static void
cxstart (struct ifnet *ifp)
{
cx_chan_t *q, *c = ifp->if_softc;
if (c->ifp->if_flags & IFF_DEBUG)
print (("cx%d.%d: cxstart\n", c->board->num, c->num));
/* Start the master subchannel. */
cxsend (c);
/* Start all slave subchannels. */
if (c->slaveq && ! sppp_isempty (c->master))
for (q=c->slaveq; q; q=q->slaveq)
if ((q->ifp->if_flags & IFF_RUNNING) &&
! (q->ifp->if_flags & IFF_OACTIVE))
cxsend (q);
}
/*
* Handle transmit timeouts.
* Recover after lost transmit interrupts.
* Always called on splimp().
*/
static void
cxwatchdog (struct ifnet *ifp)
{
cx_chan_t *q, *c = ifp->if_softc;
if (! (ifp->if_flags & IFF_RUNNING))
return;
if (ifp->if_flags & IFF_DEBUG)
printf ("cx%d.%d: device timeout\n", c->board->num, c->num);
cxdown (c);
for (q=c->slaveq; q; q=q->slaveq)
cxdown (q);
cxup (c);
for (q=c->slaveq; q; q=q->slaveq)
cxup (q);
cxstart (ifp);
}
/*
* Handle receive interrupts, including receive errors and
* receive timeout interrupt.
*/
static void
cxrinth (cx_chan_t *c)
{
unsigned short port = c->chip->port;
unsigned short len, risr = inw (RISR(port));
/* Receive errors. */
if (risr & (RIS_BUSERR | RIS_OVERRUN | RISH_CRCERR | RISH_RXABORT)) {
if (c->ifp->if_flags & IFF_DEBUG)
printf ("cx%d.%d: receive error, risr=%b\n",
c->board->num, c->num, risr, RISH_BITS);
++c->ifp->if_ierrors;
++c->stat->ierrs;
if (risr & RIS_OVERRUN)
++c->ifp->if_collisions;
} else if (risr & RIS_EOBUF) {
if (c->ifp->if_flags & IFF_DEBUG)
print (("cx%d.%d: hdlc receive interrupt, risr=%b, arbsts=%b, brbsts=%b\n",
c->board->num, c->num, risr, RISH_BITS,
inb (ARBSTS(port)), BSTS_BITS,
inb (BRBSTS(port)), BSTS_BITS));
++c->stat->ipkts;
/* Handle received data. */
len = (risr & RIS_BB) ? inw(BRBCNT(port)) : inw(ARBCNT(port));
c->stat->ibytes += len;
if (len > DMABUFSZ) {
/* Fatal error: actual DMA transfer size
* exceeds our buffer size. It could be caused
* by incorrectly programmed DMA register or
* hardware fault. Possibly, should panic here. */
printf ("cx%d.%d: panic! DMA buffer overflow: %d bytes\n",
c->board->num, c->num, len);
++c->ifp->if_ierrors;
} else if (! (risr & RIS_EOFR)) {
/* The received frame does not fit in the DMA buffer.
* It could be caused by serial lie noise,
* or if the peer has too big MTU. */
if (c->ifp->if_flags & IFF_DEBUG)
printf ("cx%d.%d: received frame length exceeds MTU, risr=%b\n",
c->board->num, c->num, risr, RISH_BITS);
++c->ifp->if_ierrors;
} else {
/* Valid frame received. */
if (c->ifp->if_flags & IFF_DEBUG)
print (("cx%d.%d: hdlc received %d bytes\n",
c->board->num, c->num, len));
cxinput (c, (risr & RIS_BB) ? c->brbuf : c->arbuf, len);
++c->ifp->if_ipackets;
}
} else if (c->ifp->if_flags & IFF_DEBUG) {
print (("cx%d.%d: unknown hdlc receive interrupt, risr=%b\n",
c->board->num, c->num, risr, RISH_BITS));
++c->stat->ierrs;
}
/* Restart receiver. */
if (! (inb (ARBSTS(port)) & BSTS_OWN24)) {
outw (ARBCNT(port), DMABUFSZ);
outb (ARBSTS(port), BSTS_OWN24);
}
if (! (inb (BRBSTS(port)) & BSTS_OWN24)) {
outw (BRBCNT(port), DMABUFSZ);
outb (BRBSTS(port), BSTS_OWN24);
}
}
/*
* Handle transmit interrupt.
*/
static int
cxtinth (cx_chan_t *c)
{
unsigned short port = c->chip->port;
unsigned char tisr = inb (TISR(port));
unsigned char teoir = 0;
c->ifp->if_flags &= ~IFF_OACTIVE;
if (c->ifp == c->master)
c->ifp->if_timer = 0;
if (tisr & (TIS_BUSERR | TIS_UNDERRUN)) {
/* if (c->ifp->if_flags & IFF_DEBUG) */
print (("cx%d.%d: transmit error, tisr=%b, atbsts=%b, btbsts=%b\n",
c->board->num, c->num, tisr, TIS_BITS,
inb (ATBSTS(port)), BSTS_BITS,
inb (BTBSTS(port)), BSTS_BITS));
++c->ifp->if_oerrors;
++c->stat->oerrs;
/* Terminate the failed buffer. */
/* teoir = TEOI_TERMBUFF; */
} else if (c->ifp->if_flags & IFF_DEBUG)
print (("cx%d.%d: hdlc transmit interrupt, tisr=%b, atbsts=%b, btbsts=%b\n",
c->board->num, c->num, tisr, TIS_BITS,
inb (ATBSTS(port)), BSTS_BITS,
inb (BTBSTS(port)), BSTS_BITS));
if (tisr & TIS_EOFR) {
++c->ifp->if_opackets;
++c->stat->opkts;
}
/* Start output on the (sub-) channel. */
cxsend (c);
return (teoir);
}
static void
cxintr (int bnum)
{
cx_board_t *b = cxboard + bnum;
while (! (inw (BSR(b->port)) & BSR_NOINTR)) {
/* Acknowledge the interrupt to enter the interrupt context. */
/* Read the local interrupt vector register. */
unsigned char livr = inb (IACK(b->port, BRD_INTR_LEVEL));
cx_chan_t *c = b->chan + (livr>>2 & 0xf);
unsigned short port = c->chip->port;
unsigned short eoiport = REOIR(port);
unsigned char eoi = 0;
if (c->type == T_NONE) {
printf ("cx%d.%d: unexpected interrupt, livr=0x%x\n",
c->board->num, c->num, livr);
continue; /* incorrect channel number? */
}
/* print (("cx%d.%d: interrupt, livr=0x%x\n",
c->board->num, c->num, livr)); */
/* Clear RTS to stop receiver data flow while we are busy
* processing the interrupt, thus avoiding underruns. */
if (! c->sopt.norts) {
outb (MSVR_RTS(port), 0);
c->rts = 0;
}
switch (livr & 3) {
case LIV_EXCEP: /* receive exception */
case LIV_RXDATA: /* receive interrupt */
++c->stat->rintr;
switch (c->mode) {
case M_ASYNC: eoi = cxrinta (c); break;
case M_HDLC: cxrinth (c); break;
default:; /* No bisync and X.21 yet */
}
break;
case LIV_TXDATA: /* transmit interrupt */
++c->stat->tintr;
eoiport = TEOIR(port);
switch (c->mode) {
case M_ASYNC: cxtinta (c); break;
case M_HDLC: eoi = cxtinth (c); break;
default:; /* No bisync and X.21 yet */
}
break;
case LIV_MODEM: /* modem/timer interrupt */
++c->stat->mintr;
eoiport = MEOIR(port);
cxmint (c);
break;
}
/* Raise RTS for this channel if and only if
* both receive buffers are empty. */
if (! c->sopt.norts && (inb (CSR(port)) & CSRA_RXEN) &&
(inb (ARBSTS(port)) & BSTS_OWN24) &&
(inb (BRBSTS(port)) & BSTS_OWN24)) {
outb (MSVR_RTS(port), MSV_RTS);
c->rts = 1;
}
/* Exit from interrupt context. */
outb (eoiport, eoi);
/* Master channel - start output on all idle subchannels. */
if (c->master == c->ifp && c->slaveq &&
(livr & 3) == LIV_TXDATA && c->mode == M_HDLC &&
! sppp_isempty (c->ifp)) {
cx_chan_t *q;
for (q=c->slaveq; q; q=q->slaveq)
if ((q->ifp->if_flags & IFF_RUNNING) &&
! (q->ifp->if_flags & IFF_OACTIVE))
cxsend (q);
}
}
}
/*
* Process the received packet.
*/
static void
cxinput (cx_chan_t *c, void *buf, unsigned len)
{
/* Make an mbuf. */
struct mbuf *m = makembuf (buf, len);
if (! m) {
if (c->ifp->if_flags & IFF_DEBUG)
printf ("cx%d.%d: no memory for packet\n",
c->board->num, c->num);
++c->ifp->if_iqdrops;
return;
}
m->m_pkthdr.rcvif = c->master;
#ifdef DEBUG
if (c->ifp->if_flags & IFF_DEBUG)
printmbuf (m);
#endif
/*
* Check if there's a BPF listener on this interface.
* If so, hand off the raw packet to bpf.
*/
if (c->ifp->if_bpf)
bpf_tap (c->ifp, buf, len);
/* Count the received bytes to the subchannel, not the master. */
c->master->if_ibytes -= len + 3;
c->ifp->if_ibytes += len + 3;
sppp_input (c->master, m);
}
void cxswitch (cx_chan_t *c, cx_soft_opt_t new)
{
new.ext = 0;
if (! new.ext) {
struct sppp *sp = (struct sppp*) c->ifp;
#if 0 /* Doesn't work this way any more 990402 /phk */
if (new.cisco)
sp->pp_flags |= PP_CISCO;
else
sp->pp_flags &= ~PP_CISCO;
#endif
if (new.keepalive)
sp->pp_flags |= PP_KEEPALIVE;
else
sp->pp_flags &= ~PP_KEEPALIVE;
}
c->sopt = new;
}
Reference in New Issue View Git Blame Copy Permalink