mirror of
https://git.FreeBSD.org/src.git
synced 2024-12-29 12:03:03 +00:00
0e630ee24b
one tx buffer for these cards. The old driver only used one. We use 1 for symbol, and 3 for prism cards. o Don't do the maximum loops thing in the ISR. In fact, revert to the old interrupt handler. Lucent cards don't seem to work too well if you don't disable/enable interrupts from the card in the ISR. Between these two changes, Lucent cards suck less. They work in autoselect mode only. And seem to get 1Mbps or 2Mbps only. Setting a specific media speed doesn't work, and I've had a few issues even with these patches. They turn a former brick into a nearly useful card. These patches work on the prism 2 and 2.5 PC Card cards that I have. I've not tested this on PCI cards. I suspect, but couldn't find proof, that they were the reason that the ISR was changed so radically from its FreeBSD roots in NetBSD. We might need to have a variant ISR if so.
215 lines
6.5 KiB
C
215 lines
6.5 KiB
C
/*
|
|
* Copyright (c) 2002
|
|
* M Warner Losh <imp@freebsd.org>. All rights reserved.
|
|
* Copyright (c) 1997, 1998, 1999
|
|
* Bill Paul <wpaul@ctr.columbia.edu>. All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by Bill Paul.
|
|
* 4. Neither the name of the author nor the names of any co-contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
|
|
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
|
|
* THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
#if 0
|
|
#define WICACHE /* turn on signal strength cache code */
|
|
#define MAXWICACHE 10
|
|
#endif
|
|
|
|
/*
|
|
* Encryption controls. We can enable or disable encryption as
|
|
* well as specify up to 4 encryption keys. We can also specify
|
|
* which of the four keys will be used for transmit encryption.
|
|
*/
|
|
#define WI_RID_ENCRYPTION 0xFC20
|
|
#define WI_RID_AUTHTYPE 0xFC21
|
|
#define WI_RID_DEFLT_CRYPT_KEYS 0xFCB0
|
|
#define WI_RID_TX_CRYPT_KEY 0xFCB1
|
|
#define WI_RID_WEP_AVAIL 0xFD4F
|
|
#define WI_RID_P2_TX_CRYPT_KEY 0xFC23
|
|
#define WI_RID_P2_CRYPT_KEY0 0xFC24
|
|
#define WI_RID_P2_CRYPT_KEY1 0xFC25
|
|
#define WI_RID_MICROWAVE_OVEN 0xFC25
|
|
#define WI_RID_P2_CRYPT_KEY2 0xFC26
|
|
#define WI_RID_P2_CRYPT_KEY3 0xFC27
|
|
#define WI_RID_P2_ENCRYPTION 0xFC28
|
|
#define WI_RID_ROAMING_MODE 0xFC2D
|
|
#define WI_RID_CUR_TX_RATE 0xFD44 /* current TX rate */
|
|
|
|
struct wi_softc {
|
|
struct ieee80211com sc_ic;
|
|
device_t sc_dev;
|
|
#if __FreeBSD_version >= 500000
|
|
struct mtx sc_mtx;
|
|
#endif
|
|
int sc_unit;
|
|
int wi_gone;
|
|
int sc_enabled;
|
|
int sc_reset;
|
|
int sc_firmware_type;
|
|
#define WI_NOTYPE 0
|
|
#define WI_LUCENT 1
|
|
#define WI_INTERSIL 2
|
|
#define WI_SYMBOL 3
|
|
int sc_pri_firmware_ver; /* Primary firmware */
|
|
int sc_sta_firmware_ver; /* Station firmware */
|
|
|
|
int wi_bus_type; /* Bus attachment type */
|
|
struct resource * local;
|
|
int local_rid;
|
|
struct resource * iobase;
|
|
int iobase_rid;
|
|
struct resource * irq;
|
|
int irq_rid;
|
|
struct resource * mem;
|
|
int mem_rid;
|
|
bus_space_handle_t wi_localhandle;
|
|
bus_space_tag_t wi_localtag;
|
|
bus_space_handle_t wi_bhandle;
|
|
bus_space_tag_t wi_btag;
|
|
bus_space_handle_t wi_bmemhandle;
|
|
bus_space_tag_t wi_bmemtag;
|
|
void * wi_intrhand;
|
|
int wi_io_addr;
|
|
|
|
struct ifmedia sc_media;
|
|
struct bpf_if *sc_drvbpf;
|
|
int sc_flags;
|
|
int sc_if_flags;
|
|
int sc_bap_id;
|
|
int sc_bap_off;
|
|
|
|
u_int16_t sc_procframe;
|
|
u_int16_t sc_portnum;
|
|
|
|
u_int16_t sc_dbm_adjust;
|
|
u_int16_t sc_max_datalen;
|
|
u_int16_t sc_frag_thresh;
|
|
u_int16_t sc_rts_thresh;
|
|
u_int16_t sc_system_scale;
|
|
u_int16_t sc_cnfauthmode;
|
|
u_int16_t sc_roaming_mode;
|
|
u_int16_t sc_microwave_oven;
|
|
u_int16_t sc_authtype;
|
|
|
|
int sc_nodelen;
|
|
char sc_nodename[IEEE80211_NWID_LEN];
|
|
char sc_net_name[IEEE80211_NWID_LEN];
|
|
|
|
int sc_buflen; /* TX buffer size */
|
|
int sc_ntxbuf;
|
|
#define WI_NTXBUF 3
|
|
struct {
|
|
int d_fid;
|
|
int d_len;
|
|
} sc_txd[WI_NTXBUF]; /* TX buffers */
|
|
int sc_txnext; /* index of next TX */
|
|
int sc_txcur; /* index of current TX*/
|
|
int sc_tx_timer;
|
|
int sc_scan_timer;
|
|
int sc_syn_timer;
|
|
|
|
struct wi_counters sc_stats;
|
|
u_int16_t sc_ibss_port;
|
|
|
|
#define WI_MAXAPINFO 30
|
|
struct wi_apinfo sc_aps[WI_MAXAPINFO];
|
|
int sc_naps;
|
|
|
|
struct {
|
|
u_int16_t wi_sleep;
|
|
u_int16_t wi_delaysupp;
|
|
u_int16_t wi_txsupp;
|
|
u_int16_t wi_monitor;
|
|
u_int16_t wi_ledtest;
|
|
u_int16_t wi_ledtest_param0;
|
|
u_int16_t wi_ledtest_param1;
|
|
u_int16_t wi_conttx;
|
|
u_int16_t wi_conttx_param0;
|
|
u_int16_t wi_contrx;
|
|
u_int16_t wi_sigstate;
|
|
u_int16_t wi_sigstate_param0;
|
|
u_int16_t wi_confbits;
|
|
u_int16_t wi_confbits_param0;
|
|
} wi_debug;
|
|
|
|
int sc_false_syns;
|
|
|
|
u_int16_t sc_txbuf[IEEE80211_MAX_LEN/2];
|
|
};
|
|
#define sc_if sc_ic.ic_if
|
|
|
|
/* maximum consecutive false change-of-BSSID indications */
|
|
#define WI_MAX_FALSE_SYNS 10
|
|
|
|
#define WI_SCAN_INQWAIT 3 /* wait sec before inquire */
|
|
#define WI_SCAN_WAIT 5 /* maximum scan wait */
|
|
|
|
#define WI_FLAGS_ATTACHED 0x0001
|
|
#define WI_FLAGS_INITIALIZED 0x0002
|
|
#define WI_FLAGS_OUTRANGE 0x0004
|
|
#define WI_FLAGS_HAS_MOR 0x0010
|
|
#define WI_FLAGS_HAS_ROAMING 0x0020
|
|
#define WI_FLAGS_HAS_DIVERSITY 0x0040
|
|
#define WI_FLAGS_HAS_SYSSCALE 0x0080
|
|
#define WI_FLAGS_BUG_AUTOINC 0x0100
|
|
#define WI_FLAGS_HAS_FRAGTHR 0x0200
|
|
#define WI_FLAGS_HAS_DBMADJUST 0x0400
|
|
|
|
struct wi_card_ident {
|
|
u_int16_t card_id;
|
|
char *card_name;
|
|
u_int8_t firm_type;
|
|
};
|
|
|
|
#if __FreeBSD_version < 500000
|
|
/*
|
|
* Various compat hacks/kludges
|
|
*/
|
|
#define le16toh(x) (x)
|
|
#define htole16(x) (x)
|
|
#define ifaddr_byindex(idx) ifnet_addrs[(idx) - 1];
|
|
#define WI_LOCK_DECL() int s
|
|
#define WI_LOCK(_sc) s = splimp()
|
|
#define WI_UNLOCK(_sc) splx(s)
|
|
#else
|
|
#define WI_LOCK_DECL()
|
|
#define WI_LOCK(_sc) mtx_lock(&(_sc)->sc_mtx)
|
|
#define WI_UNLOCK(_sc) mtx_unlock(&(_sc)->sc_mtx)
|
|
#endif
|
|
|
|
int wi_attach(device_t);
|
|
int wi_detach(device_t);
|
|
void wi_shutdown(device_t);
|
|
int wi_alloc(device_t, int);
|
|
void wi_free(device_t);
|
|
extern devclass_t wi_devclass;
|
|
void wi_init(void *);
|
|
void wi_intr(void *);
|
|
int wi_mgmt_xmit(struct wi_softc *, caddr_t, int);
|
|
void wi_stop(struct ifnet *, int);
|
|
int wi_symbol_load_firm(struct wi_softc *, const void *, int, const void *, int);
|