1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-25 11:37:56 +00:00
freebsd/sys/netatm/spans/spans_subr.c
Poul-Henning Kamp 1820df7a2d Add new files for HARP3
Host ATM Research Platform (HARP), Network Computing Services, Inc.
This software was developed with the support of the Defense Advanced
Research Projects Agency (DARPA).
1998-09-15 08:23:17 +00:00

495 lines
10 KiB
C

/*
*
* ===================================
* HARP | Host ATM Research Platform
* ===================================
*
*
* This Host ATM Research Platform ("HARP") file (the "Software") is
* made available by Network Computing Services, Inc. ("NetworkCS")
* "AS IS". NetworkCS does not provide maintenance, improvements or
* support of any kind.
*
* NETWORKCS MAKES NO WARRANTIES OR REPRESENTATIONS, EXPRESS OR IMPLIED,
* INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY
* AND FITNESS FOR A PARTICULAR PURPOSE, AS TO ANY ELEMENT OF THE
* SOFTWARE OR ANY SUPPORT PROVIDED IN CONNECTION WITH THIS SOFTWARE.
* In no event shall NetworkCS be responsible for any damages, including
* but not limited to consequential damages, arising from or relating to
* any use of the Software or related support.
*
* Copyright 1994-1998 Network Computing Services, Inc.
*
* Copies of this Software may be made, however, the above copyright
* notice must be reproduced on all copies.
*
* @(#) $Id: spans_subr.c,v 1.9 1998/08/26 23:29:10 mks Exp $
*
*/
/*
* SPANS Signalling Manager
* ---------------------------
*
* SPANS-related subroutines.
*
*/
#ifndef lint
static char *RCSid = "@(#) $Id: spans_subr.c,v 1.9 1998/08/26 23:29:10 mks Exp $";
#endif
#include <netatm/kern_include.h>
#include "spans_xdr.h"
#include <netatm/spans/spans_var.h>
/*
* Open a SPANS VCC
*
* Called when a user wants to open a VC. This function will construct
* a VCCB, create the stack requested by the user, and, if we are
* opening an SVC, start the SPANS signalling message exchange. The
* user will have to wait for a notify event to be sure the SVC is fully
* open.
*
* Must be called at splnet.
*
* Arguments:
* spp pointer to SPANS protocol instance
* acp pointer to PVC's connection parameters
*
* Returns:
* 0 VCC creation successful
* errno VCC setup failed - reason indicated
*
*/
int
spans_open_vcc(spp, cvp)
struct spans *spp;
Atm_connvc *cvp;
{
struct atm_pif *pip = spp->sp_pif;
struct spans_vccb *svp;
Atm_addr_pvc *pvp;
spans_aal aal;
int err, pvc, vpi, vci;
ATM_DEBUG2("spans_open_vcc: spp=0x%x, cvp=0x%x\n", spp, cvp);
/*
* Validate user parameters. AAL and encapsulation are
* checked by the connection manager.
*/
/*
* Check called party address(es)
*/
if (cvp->cvc_attr.called.tag != T_ATM_PRESENT ||
cvp->cvc_attr.called.addr.address_format ==
T_ATM_ABSENT ||
cvp->cvc_attr.called.subaddr.address_format !=
T_ATM_ABSENT) {
return(EINVAL);
}
switch (cvp->cvc_attr.called.addr.address_format) {
case T_ATM_PVC_ADDR:
/*
* Make sure VPI/VCI is valid
*/
pvc = 1;
pvp = (Atm_addr_pvc *)cvp->cvc_attr.called.addr.address;
vpi = ATM_PVC_GET_VPI(pvp);
vci = ATM_PVC_GET_VCI(pvp);
if ((vpi > pip->pif_maxvpi) ||
(vci == 0) ||
(vci > pip->pif_maxvci)) {
return(ERANGE);
}
/*
* Make sure VPI/VCI is not already in use
*/
if (spans_find_vpvc(spp, vpi, vci, 0)) {
return(EADDRINUSE);
}
ATM_DEBUG2("spans_open_vcc: VPI.VCI=%d.%d\n",
vpi, vci);
break;
case T_ATM_SPANS_ADDR:
pvc = 0;
vpi = vci = 0;
/*
* Check signalling state
*/
if (spp->sp_state != SPANS_ACTIVE) {
return(ENETDOWN);
}
/*
*Check destination address length
*/
if (cvp->cvc_attr.called.addr.address_length !=
sizeof(spans_addr)) {
return(EINVAL);
}
break;
default:
return(EINVAL);
}
/*
* Check that this is for the same interface SPANS uses
*/
if (!cvp->cvc_attr.nif ||
cvp->cvc_attr.nif->nif_pif != spp->sp_pif) {
return(EINVAL);
}
/*
* Check AAL
*/
if (!spans_get_spans_aal(cvp->cvc_attr.aal.type, &aal)) {
return(EINVAL);
}
#ifdef NOTDEF
/*
* Check encapsulation
*/
/* XXX -- How do we check encapsulation? */
if (cvp->ac_encaps != ATM_ENC_NULL) {
return(EINVAL);
}
#endif
/*
* Allocate control block for VCC
*/
svp = (struct spans_vccb *)atm_allocate(&spans_vcpool);
if (svp == NULL) {
return(ENOMEM);
}
/*
* Fill in VCCB
*/
if (pvc) {
svp->sv_type = VCC_PVC | VCC_IN | VCC_OUT;
svp->sv_vpi = vpi;
svp->sv_vci = vci;
svp->sv_sstate = (spp->sp_state == SPANS_ACTIVE ?
SPANS_VC_ACTIVE : SPANS_VC_ACT_DOWN);
svp->sv_ustate = VCCU_OPEN;
} else {
svp->sv_type = VCC_SVC | VCC_OUT;
spans_addr_copy(cvp->cvc_attr.called.addr.address,
&svp->sv_conn.con_dst);
spans_addr_copy(spp->sp_addr.address,
&svp->sv_conn.con_src);
svp->sv_conn.con_dsap = SPANS_SAP_IP;
svp->sv_conn.con_ssap = spans_ephemeral_sap(spp);
svp->sv_sstate = SPANS_VC_POPEN;
svp->sv_ustate = VCCU_POPEN;
}
svp->sv_proto = ATM_SIG_SPANS;
svp->sv_pif = spp->sp_pif;
svp->sv_nif = cvp->cvc_attr.nif;
svp->sv_connvc = cvp;
svp->sv_spans_aal = aal;
svp->sv_tstamp = time_second;
/*
* Put VCCB on SPANS queue
*/
ENQUEUE(svp, struct spans_vccb, sv_sigelem, spp->sp_vccq);
/*
* Link VCCB to VCC connection block
*/
cvp->cvc_vcc = (struct vccb *) svp;
/*
* Start the SPANS message exchange if this is an SVC
*/
if (!pvc) {
svp->sv_retry = 0;
svp->sv_spans_qos.rsc_peak = 1;
svp->sv_spans_qos.rsc_mean = 1;
svp->sv_spans_qos.rsc_burst = 1;
err = spans_send_open_req(spp, svp);
if (err) {
/*
* On error, delete the VCCB
*/
DEQUEUE(svp, struct spans_vccb, sv_sigelem,
spp->sp_vccq);
cvp->cvc_vcc = (struct vccb *)0;
atm_free((caddr_t)svp);
return(err);
} else {
/*
* VCCB is opening--set the retransmit timer
*/
SPANS_VC_TIMER((struct vccb *) svp, SV_TIMEOUT);
}
}
return(0);
}
/*
* Close a SPANS VCC
*
* Called when a user wants to close a VCC. This function will clean
* up the VCCB and, for an SVC, send a close request.
*
* Must be called at splnet.
*
* Arguments:
* spp pointer to SPANS protocol instance
* svp pointer to VCCB for the VCC to be closed
*
* Returns:
* 0 VCC is now closed
* errno error encountered
*/
int
spans_close_vcc(spp, svp, force)
struct spans *spp;
struct spans_vccb *svp;
int force;
{
int err = 0;
ATM_DEBUG2("spans_close_vcc: svp=0x%x, state=%d\n", svp,
svp->sv_sstate);
/*
* Check that this is for the same interface SPANS uses
*/
if (svp->sv_pif != spp->sp_pif) {
return (EINVAL);
}
/*
* Kill any possible timer
*/
SPANS_VC_CANCEL((struct vccb *) svp);
/*
* Mark the close time.
*/
svp->sv_tstamp = time_second;
/*
* Process based on the connection type
*/
if (svp->sv_type & VCC_PVC) {
svp->sv_sstate = SPANS_VC_FREE;
svp->sv_ustate = VCCU_CLOSED;
} else if (svp->sv_type & VCC_SVC) {
/*
* Update VCCB states
*/
svp->sv_ustate = VCCU_CLOSED;
/*
* Send the appropriate SPANS close message
*/
switch (svp->sv_sstate) {
case SPANS_VC_R_POPEN:
err = spans_send_open_rsp(spp, svp, SPANS_FAIL);
svp->sv_sstate = SPANS_VC_FREE;
break;
case SPANS_VC_OPEN:
case SPANS_VC_POPEN:
case SPANS_VC_ABORT:
svp->sv_retry = 0;
err = spans_send_close_req(spp, svp);
if (force) {
svp->sv_sstate = SPANS_VC_FREE;
} else {
svp->sv_sstate = SPANS_VC_CLOSE;
SPANS_VC_TIMER((struct vccb *) svp,
SV_TIMEOUT);
}
break;
case SPANS_VC_CLOSE:
if (force) {
svp->sv_sstate = SPANS_VC_FREE;
}
break;
}
}
/*
* Wait for user to free resources
*/
return(err);
}
/*
* Clear a SPANS VCC
*
* Called when the signalling manager wants to close a VCC immediately.
* This function will clean up the VCCB and notify the owner.
*
* Must be called at splnet.
*
* Arguments:
* spp pointer to SPANS protocol instance
* svp pointer to VCCB for the VCC to be closed
*
* Returns:
* 0 VCC is now closed
* errno error encountered
*/
int
spans_clear_vcc(spp, svp)
struct spans *spp;
struct spans_vccb *svp;
{
u_char outstate;
ATM_DEBUG2("spans_clear_vcc: svp=0x%x, state=%d\n", svp,
svp->sv_sstate);
/*
* Check that this is for the same interface SPANS uses
*/
if (svp->sv_pif != spp->sp_pif) {
return (EINVAL);
}
/*
* Kill any possible timer
*/
SPANS_VC_CANCEL((struct vccb *) svp);
/*
* Mark the close time
*/
svp->sv_tstamp = time_second;
/*
* Mark the VCCB closed
*/
outstate = svp->sv_sstate;
svp->sv_sstate = SPANS_VC_FREE;
svp->sv_ustate = VCCU_CLOSED;
/*
* Notify the user if old state indicates.
*/
switch (outstate) {
case SPANS_VC_ACTIVE:
case SPANS_VC_ACT_DOWN:
case SPANS_VC_POPEN:
case SPANS_VC_OPEN:
case SPANS_VC_CLOSE:
case SPANS_VC_ABORT:
/* XXX -- set cause */
atm_cm_cleared(svp->sv_connvc);
break;
case SPANS_VC_NULL:
case SPANS_VC_R_POPEN:
case SPANS_VC_FREE:
break;
}
/*
* Wait for user to free resources
*/
return(0);
}
/*
* Reset the switch state
*
* Called when the switch or host at the far end of the ATM link has
* gone away. This can be deteched either by a number of SPANS_STAT_REQ
* messages going unanswered or by the host epoch changing in a SPANS
* SPANS_STAT_IND or SPANS_STAT_REQ message.
*
* Arguments:
* spp pointer to SPANS protocol instance
*
* Returns:
* none
*
*/
void
spans_switch_reset(spp, cause)
struct spans *spp;
int cause;
{
int s;
struct vccb *vcp, *vnext;
ATM_DEBUG2("spans_switch_reset: spp=0x%x, cause=%d\n",
spp, cause);
/*
* Log the event
*/
log(LOG_INFO, "spans: signalling %s on interface %s%d\n",
(cause == SPANS_UNI_DOWN ? "down" : "up"),
spp->sp_pif->pif_name,
spp->sp_pif->pif_unit);
/*
* Terminate all of our VCCs
*/
s = splnet();
for (vcp = Q_HEAD(spp->sp_vccq, struct vccb); vcp;
vcp = vnext) {
u_char outstate;
vnext = Q_NEXT(vcp, struct vccb, vc_sigelem);
if (vcp->vc_type & VCC_SVC) {
/*
* Close the SVC and notify the owner
*/
outstate = vcp->vc_sstate;
SPANS_VC_CANCEL((struct vccb *) vcp);
vcp->vc_ustate = VCCU_CLOSED;
vcp->vc_sstate = SPANS_VC_FREE;
if (outstate == SPANS_VC_OPEN ||
outstate == SPANS_VC_POPEN) {
/* XXX -- set cause */
atm_cm_cleared(vcp->vc_connvc);
}
} else if (vcp->vc_type & VCC_PVC) {
/*
* Note new state
*/
switch(cause) {
case SPANS_UNI_DOWN:
vcp->vc_sstate = SPANS_VC_ACT_DOWN;
break;
case SPANS_UNI_UP:
vcp->vc_sstate = SPANS_VC_ACTIVE;
break;
}
} else {
log(LOG_ERR, "spans: invalid VCC type: vccb=0x%x, type=%d\n",
vcp, vcp->vc_type);
}
}
(void) splx(s);
}