1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-07 09:20:11 +00:00
freebsd/lib/libc/net/inet6_opt_init.3
2005-11-23 16:07:54 +00:00

338 lines
9.1 KiB
Groff

.\" $KAME: inet6_opt_init.3,v 1.7 2004/12/27 05:08:23 itojun Exp $
.\"
.\" Copyright (C) 2004 WIDE Project.
.\" All rights reserved.
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\" notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\" notice, this list of conditions and the following disclaimer in the
.\" documentation and/or other materials provided with the distribution.
.\" 3. Neither the name of the project nor the names of its contributors
.\" may be used to endorse or promote products derived from this software
.\" without specific prior written permission.
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
.\" ARE DISCLAIMED. IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
.\" SUCH DAMAGE.
.\"
.\" $FreeBSD$
.\"
.Dd December 23, 2004
.Dt INET6_OPT_INIT 3
.Os
.\"
.Sh NAME
.Nm inet6_opt_init ,
.Nm inet6_opt_append ,
.Nm inet6_opt_finish ,
.Nm inet6_opt_set_val ,
.Nm inet6_opt_next ,
.Nm inet6_opt_find ,
.Nm inet6_opt_get_val
.Nd IPv6 Hop-by-Hop and Destination Options manipulation
.\"
.Sh SYNOPSIS
.In netinet/in.h
.Ft "int"
.Fn inet6_opt_init "void *extbuf" "socklen_t extlen"
.Ft "int"
.Fn inet6_opt_append "void *extbuf" "socklen_t extlen" "int offset" "u_int8_t type" "socklen_t len" "u_int8_t align" "void **databufp"
.Ft "int"
.Fn inet6_opt_finish "void *extbuf" "socklen_t extlen" "int offset"
.Ft "int"
.Fn inet6_opt_set_val "void *databuf" "int offset" "void *val" "socklen_t vallen"
.Ft "int"
.Fn inet6_opt_next "void *extbuf" "socklen_t extlen" "int offset" "u_int8_t *typep" "socklen_t *lenp" "void **databufp"
.Ft "int"
.Fn inet6_opt_find "void *extbuf" "socklen_t extlen" "int offset" "u_int8_t type" "socklen_t *lenp" "void **databufp"
.Ft "int"
.Fn inet6_opt_get_val "void *databuf" "int offset" "void *val" "socklen_t vallen"
.\"
.Sh DESCRIPTION
Building and parsing the Hop-by-Hop and Destination options is
complicated.
The advanced sockets API defines a set of functions to
help applications create and manipulate Hop-by-Hop and Destination
options.
This man page describes the functions specified in
IETF Draft RFC3542.
These functions use the
formatting rules specified in Appendix B in RFC2460, i.e., that the
largest field is placed last in the option.
The function prototypes
for these functions are all contained in the
.In netinet/in.h
header file.
.\"
.Ss inet6_opt_init
The
.Fn inet6_opt_init
function
returns the number of bytes needed for an empty
extension header, one without any options.
If the
.Fa extbuf
argument points to a valid section of memory
then the
.Fn inet6_opt_init
function also initializes the extension header's length field.
When attempting to initialize an extension buffer passed in the
.Fa extbuf
argument,
.Fa extlen
must be a positive multiple of 8 or else the function fails and
returns \-1 to the caller.
.\"
.Ss inet6_opt_append
The
.Fn inet6_opt_append
function can perform two different jobs.
When a valid
.Fa extbuf
argument is supplied it appends an option to the extension buffer and
returns the updated total length as well as a pointer to the newly
created option in
.Fa databufp .
If the value
of
.Fa extbuf
is
.Dv NULL
then the
.Fn inet6_opt_append
function only reports what the total length would
be if the option were actually appended.
The
.Fa len
and
.Fa align
arguments specify the length of the option and the required data
alignment which must be used when appending the option.
The
.Fa offset
argument should be the length returned by the
.Fn inet6_opt_init
function or a previous call to
.Fn inet6_opt_append .
.Pp
The
.Fa type
argument is the 8-bit option type.
.Pp
After
.Fn inet6_opt_append
has been called, the application can use the buffer pointed to by
.Fa databufp
directly, or use
.Fn inet6_opt_set_val
to specify the data to be contained in the option.
.Pp
Option types of
.Li 0
and
.Li 1
are reserved for the
.Li Pad1
and
.Li PadN
options.
All other values from 2 through 255 may be used by applications.
.Pp
The length of the option data is contained in an 8-bit value and so
may contain any value from 0 through 255.
.Pp
The
.Fa align
parameter must have a value of 1, 2, 4, or 8 and cannot exceed the
value of
.Fa len .
The alignment values represent no alignment, 16 bit, 32 bit and 64 bit
alignments, respectively.
.\"
.Ss inet6_opt_finish
The
.Fn inet6_opt_finish
function
calculates the final padding necessary to make the extension header a
multiple of 8 bytes, as required by the IPv6 extension header
specification, and returns the extension header's updated total
length.
The
.Fa offset
argument should be the length returned by
.Fn inet6_opt_init
or
.Fn inet6_opt_append .
When
.Fa extbuf
is not
.Dv NULL
the function also sets up the appropriate padding bytes by inserting a
Pad1 or PadN option of the proper length.
.Pp
If the extension header is too small to contain the proper padding
then an error of \-1 is returned to the caller.
.\"
.Ss inet6_opt_set_val
The
.Fn inet6_opt_set_val
function inserts data items of various sizes into the data portion of
the option.
The
.Fa databuf
argument is a pointer to memory that was returned by the
.Fn inet6_opt_append
call and the
.Fa offset
argument specifies where the option should be placed in the
data buffer.
The
.Fa val
argument points to an area of memory containing the data to be
inserted into the extension header, and the
.Fa vallen
argument indicates how much data to copy.
.Pp
The caller should ensure that each field is aligned on its natural
boundaries as described in Appendix B of RFC2460.
.Pp
The function returns the offset for the next field which is calculated as
.Fa offset
+
.Fa vallen
and is used when composing options with multiple fields.
.\"
.Ss inet6_opt_next
The
.Fn inet6_opt_next
function parses received extension headers.
The
.Fa extbuf
and
.Fa extlen
arguments specify the location and length of the extension header
being parsed.
The
.Fa offset
argument should either be zero, for the first option, or the length value
returned by a previous call to
.Fn inet6_opt_next
or
.Fn inet6_opt_find .
The return value specifies the position where to continue scanning the
extension buffer.
The option is returned in the arguments
.Fa typep , lenp ,
and
.Fa databufp ,
which
point to the 8-bit option type, the 8-bit option length and the option
data, respectively.
This function does not return any PAD1 or PADN options.
When an error occurs or there are no more options, the return
value is \-1.
.\"
.Ss inet6_opt_find
The
.Fn inet6_opt_find
function searches the extension buffer for a particular option type,
passed in through the
.Fa type
argument.
If the option is found then the
.Fa lenp
and
.Fa databufp
arguments are updated to point to the option's length and data,
respectively.
The
.Fa extbuf
and
.Fa extlen
arguments
must point to a valid extension buffer and give its length.
The
.Fa offset
argument can be used to search from a location anywhere in the
extension header.
.Ss inet6_opt_get_val
The
.Fn inet6_opt_get_val
function extracts data items of various sizes in the data portion of
the option.
The
.Fa databuf
is a pointer returned by the
.Fn inet6_opt_next
or
.Fn inet6_opt_find
functions.
The
.Fa val
argument points where the data will be extracted.
The
.Fa offset
argument specifies from where in the data portion of the option the
value should be extracted; the first byte of option data is specified
by an offset of zero.
.Pp
It is expected that each field is aligned on its natural boundaries as
described in Appendix B of RFC2460.
.Pp
The function returns the offset for the next field
by calculating
.Fa offset
+
.Fa vallen
which can be used when extracting option content with multiple fields.
Robust receivers must verify alignment before calling this function.
.\"
.Sh RETURN VALUES
All the functions return
\-1
on an error.
.\"
.Sh EXAMPLES
RFC3542 gives comprehensive examples in Section 23.
.Pp
KAME also provides examples in the
.Pa advapitest
directory of its kit.
.\"
.Sh SEE ALSO
.Rs
.%A W. Stevens
.%A M. Thomas
.%A E. Nordmark
.%A T. Jinmei
.%T "Advanced Sockets API for IPv6"
.%N RFC3542
.%D October 2002
.Re
.Rs
.%A S. Deering
.%A R. Hinden
.%T "Internet Protocol, Version 6 (IPv6) Specification"
.%N RFC2460
.%D December 1998
.Re
.Sh STANDARDS
The functions are documented in
.Dq Advanced Sockets API for IPv6
.Pq RFC3542 .
.\"
.Sh HISTORY
The implementation first appeared in KAME advanced networking kit.