mirror of
https://git.FreeBSD.org/src.git
synced 2024-12-17 10:26:15 +00:00
46783fb897
This means that we will not have to have a bpf and a non-bpf version of our driver modules. This does not open any security hole, because the bpf core isn't loadable The drivers left unchanged are the "cross platform" drivers where the respective maintainers are urged to DTRT, whatever that may be. Add a couple of missing FreeBSD tags.
1389 lines
33 KiB
C
1389 lines
33 KiB
C
/*
|
|
* Copyright (c) 1997,1998 Maxim Bolotin and Oleg Sharoiko.
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice unmodified, this list of conditions, and the following
|
|
* disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
*/
|
|
|
|
/*
|
|
* $FreeBSD$
|
|
*
|
|
* Device driver for Crystal Semiconductor CS8920 based ethernet
|
|
* adapters. By Maxim Bolotin and Oleg Sharoiko, 27-April-1997
|
|
*/
|
|
|
|
/* #define CS_DEBUG */
|
|
#include "cs.h"
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/sockio.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/mbuf.h>
|
|
#include <sys/socket.h>
|
|
#include <sys/sysctl.h>
|
|
#include <sys/syslog.h>
|
|
|
|
#include <net/if.h>
|
|
#include <net/if_arp.h>
|
|
#include <net/if_media.h>
|
|
#include <net/ethernet.h>
|
|
|
|
#include <net/bpf.h>
|
|
|
|
#include <machine/clock.h>
|
|
|
|
#include <i386/isa/isa_device.h>
|
|
#include <i386/isa/if_csreg.h>
|
|
|
|
/* #include "pnp.h" */
|
|
#define NPNP 0
|
|
|
|
#if NPNP > 0
|
|
#include <i386/isa/pnp.h>
|
|
#endif
|
|
|
|
#ifdef CS_USE_64K_DMA
|
|
#define CS_DMA_BUFFER_SIZE 65536
|
|
#else
|
|
#define CS_DMA_BUFFER_SIZE 16384
|
|
#endif
|
|
|
|
/*
|
|
* cs_softc: per line info and status
|
|
*/
|
|
static struct cs_softc {
|
|
|
|
/* Ethernet common code */
|
|
struct arpcom arpcom;
|
|
|
|
/* Configuration words from EEPROM */
|
|
int auto_neg_cnf; /* AutoNegotitation configuration */
|
|
int adapter_cnf; /* Adapter configuration */
|
|
int isa_config; /* ISA configuration */
|
|
int chip_type; /* Type of chip */
|
|
|
|
struct ifmedia media; /* Media information */
|
|
|
|
int nic_addr; /* Base IO address of card */
|
|
int send_cmd;
|
|
int line_ctl; /* */
|
|
int send_underrun;
|
|
void *recv_ring;
|
|
|
|
unsigned char *buffer;
|
|
int buf_len;
|
|
|
|
} cs_softc[NCS];
|
|
|
|
#if NPNP > 0
|
|
static u_long cs_unit = NCS;
|
|
#endif
|
|
|
|
static int cs_recv_delay = 570;
|
|
SYSCTL_INT(_machdep, OID_AUTO, cs_recv_delay, CTLFLAG_RW, &cs_recv_delay, 0, "");
|
|
|
|
static int cs_attach __P((struct cs_softc *, int, int));
|
|
static int cs_attach_isa __P((struct isa_device *));
|
|
static void cs_init __P((void *));
|
|
static ointhand2_t csintr;
|
|
static int cs_ioctl __P((struct ifnet *, u_long, caddr_t));
|
|
static int cs_probe __P((struct isa_device *));
|
|
static int cs_cs89x0_probe __P((struct cs_softc *,
|
|
u_int *, int *, int, int, int));
|
|
static void cs_start __P((struct ifnet *));
|
|
static void cs_stop __P((struct cs_softc *));
|
|
static void cs_reset __P((struct cs_softc *));
|
|
static void cs_watchdog __P((struct ifnet *));
|
|
|
|
static int cs_mediachange __P((struct ifnet *));
|
|
static void cs_mediastatus __P((struct ifnet *, struct ifmediareq *));
|
|
static int cs_mediaset __P((struct cs_softc *, int));
|
|
|
|
static void cs_write_mbufs(struct cs_softc*, struct mbuf*);
|
|
static void cs_xmit_buf(struct cs_softc*);
|
|
static int cs_get_packet(struct cs_softc*);
|
|
static void cs_setmode(struct cs_softc*);
|
|
|
|
static int get_eeprom_data(struct cs_softc *sc, int, int, int *);
|
|
static int get_eeprom_cksum(int, int, int *);
|
|
static int wait_eeprom_ready( struct cs_softc *);
|
|
static void control_dc_dc( struct cs_softc *, int );
|
|
static int send_test_pkt( struct cs_softc * );
|
|
static int enable_tp(struct cs_softc *);
|
|
static int enable_aui(struct cs_softc *);
|
|
static int enable_bnc(struct cs_softc *);
|
|
static int cs_duplex_auto(struct cs_softc *);
|
|
|
|
struct isa_driver csdriver = {
|
|
cs_probe,
|
|
cs_attach_isa,
|
|
CS_NAME,
|
|
0
|
|
};
|
|
|
|
static int
|
|
get_eeprom_data( struct cs_softc *sc, int off, int len, int *buffer)
|
|
{
|
|
int i;
|
|
|
|
#ifdef CS_DEBUG
|
|
printf(CS_NAME":EEPROM data from %x for %x:\n", off,len);
|
|
#endif
|
|
|
|
for (i=0;i<len;i++) {
|
|
if (wait_eeprom_ready(sc) < 0) return -1;
|
|
/* Send command to EEPROM to read */
|
|
cs_writereg(sc->nic_addr, PP_EECMD, (off+i)|EEPROM_READ_CMD );
|
|
if (wait_eeprom_ready(sc)<0)
|
|
return -1;
|
|
buffer[i] = cs_readreg (sc->nic_addr, PP_EEData);
|
|
|
|
#ifdef CS_DEBUG
|
|
printf("%02x %02x ",(unsigned char)buffer[i],
|
|
(unsigned char)buffer[i+1]);
|
|
#endif
|
|
}
|
|
|
|
#ifdef CS_DEBUG
|
|
printf("\n");
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
get_eeprom_cksum(int off, int len, int *buffer)
|
|
{
|
|
int i,cksum=0;
|
|
|
|
for (i=0;i<len;i++)
|
|
cksum+=buffer[i];
|
|
cksum &= 0xffff;
|
|
if (cksum==0)
|
|
return 0;
|
|
return -1;
|
|
}
|
|
|
|
static int
|
|
wait_eeprom_ready(struct cs_softc *sc)
|
|
{
|
|
DELAY ( 30000 ); /* XXX should we do some checks here ? */
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
control_dc_dc(struct cs_softc *sc, int on_not_off)
|
|
{
|
|
unsigned int self_control = HCB1_ENBL;
|
|
|
|
if (((sc->adapter_cnf & A_CNF_DC_DC_POLARITY)!=0) ^ on_not_off)
|
|
self_control |= HCB1;
|
|
else
|
|
self_control &= ~HCB1;
|
|
cs_writereg( sc->nic_addr, PP_SelfCTL, self_control );
|
|
|
|
DELAY( 500000 );
|
|
}
|
|
|
|
|
|
static int
|
|
cs_duplex_auto(struct cs_softc *sc)
|
|
{
|
|
int i, error=0, unit=sc->arpcom.ac_if.if_unit;
|
|
|
|
cs_writereg(sc->nic_addr, PP_AutoNegCTL,
|
|
RE_NEG_NOW | ALLOW_FDX | AUTO_NEG_ENABLE );
|
|
for (i=0; cs_readreg(sc->nic_addr,PP_AutoNegST)&AUTO_NEG_BUSY; i++) {
|
|
if (i > 40000) {
|
|
printf(CS_NAME"%1d: full/half duplex "
|
|
"auto negotiation timeout\n", unit);
|
|
error = ETIMEDOUT;
|
|
break;
|
|
}
|
|
DELAY(1000);
|
|
}
|
|
DELAY( 1000000 );
|
|
return error;
|
|
}
|
|
|
|
static int
|
|
enable_tp(struct cs_softc *sc)
|
|
{
|
|
int unit = sc->arpcom.ac_if.if_unit;
|
|
|
|
cs_writereg(sc->nic_addr, PP_LineCTL, sc->line_ctl & ~AUI_ONLY);
|
|
control_dc_dc(sc, 0);
|
|
DELAY( 150000 );
|
|
|
|
if ((cs_readreg(sc->nic_addr, PP_LineST) & LINK_OK)==0) {
|
|
printf(CS_NAME"%1d: failed to enable TP\n", unit);
|
|
return EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* XXX This was rewritten from Linux driver without any tests.
|
|
*/
|
|
static int
|
|
send_test_pkt(struct cs_softc *sc)
|
|
{
|
|
char test_packet[] = { 0,0,0,0,0,0, 0,0,0,0,0,0,
|
|
0, 46, /* A 46 in network order */
|
|
0, 0, /* DSAP=0 & SSAP=0 fields */
|
|
0xf3, 0 /* Control (Test Req + P bit set) */ };
|
|
int i;
|
|
u_char ether_address_backup[ETHER_ADDR_LEN];
|
|
|
|
for (i = 0; i < ETHER_ADDR_LEN; i++) {
|
|
ether_address_backup[i] = sc->arpcom.ac_enaddr[i];
|
|
}
|
|
|
|
cs_writereg(sc->nic_addr, PP_LineCTL,
|
|
cs_readreg(sc->nic_addr, PP_LineCTL) | SERIAL_TX_ON );
|
|
bcopy(test_packet,
|
|
sc->arpcom.ac_enaddr, ETHER_ADDR_LEN);
|
|
bcopy(test_packet+ETHER_ADDR_LEN,
|
|
sc->arpcom.ac_enaddr, ETHER_ADDR_LEN);
|
|
outw(sc->nic_addr + TX_CMD_PORT, sc->send_cmd);
|
|
outw(sc->nic_addr + TX_LEN_PORT, sizeof(test_packet));
|
|
|
|
/* Wait for chip to allocate memory */
|
|
DELAY(50000);
|
|
if (!(cs_readreg(sc->nic_addr, PP_BusST) & READY_FOR_TX_NOW)) {
|
|
for (i = 0; i < ETHER_ADDR_LEN; i++) {
|
|
sc->arpcom.ac_enaddr[i] = ether_address_backup[i];
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
outsw(sc->nic_addr + TX_FRAME_PORT, test_packet, sizeof(test_packet));
|
|
|
|
DELAY(30000);
|
|
|
|
if ((cs_readreg(sc->nic_addr,PP_TxEvent) & TX_SEND_OK_BITS) == TX_OK) {
|
|
for (i = 0; i < ETHER_ADDR_LEN; i++) {
|
|
sc->arpcom.ac_enaddr[i] = ether_address_backup[i];
|
|
}
|
|
return 1;
|
|
}
|
|
for (i = 0; i < ETHER_ADDR_LEN; i++) {
|
|
sc->arpcom.ac_enaddr[i] = ether_address_backup[i];
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* XXX This was rewritten from Linux driver without any tests.
|
|
*/
|
|
static int
|
|
enable_aui(struct cs_softc *sc)
|
|
{
|
|
int unit = sc->arpcom.ac_if.if_unit;
|
|
|
|
control_dc_dc(sc, 0);
|
|
cs_writereg(sc->nic_addr, PP_LineCTL,
|
|
(sc->line_ctl & ~AUTO_AUI_10BASET) | AUI_ONLY);
|
|
|
|
if (!send_test_pkt(sc)) {
|
|
printf(CS_NAME"%1d failed to enable AUI\n", unit);
|
|
return EINVAL;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* XXX This was rewritten from Linux driver without any tests.
|
|
*/
|
|
static int
|
|
enable_bnc(struct cs_softc *sc)
|
|
{
|
|
int unit = sc->arpcom.ac_if.if_unit;
|
|
|
|
control_dc_dc(sc, 1);
|
|
cs_writereg(sc->nic_addr, PP_LineCTL,
|
|
(sc->line_ctl & ~AUTO_AUI_10BASET) | AUI_ONLY);
|
|
|
|
if (!send_test_pkt(sc)) {
|
|
printf(CS_NAME"%1d failed to enable BNC\n", unit);
|
|
return EINVAL;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
cs_cs89x0_probe(struct cs_softc *sc, u_int *dev_irq,
|
|
int *dev_drq, int iobase, int unit, int flags)
|
|
{
|
|
unsigned rev_type = 0;
|
|
int i, irq=0;
|
|
int eeprom_buff[CHKSUM_LEN];
|
|
int chip_type, pp_isaint, pp_isadma;
|
|
char chip_revision;
|
|
|
|
if ((inw(iobase+ADD_PORT) & ADD_MASK) != ADD_SIG) {
|
|
/* Chip not detected. Let's try to reset it */
|
|
if (bootverbose)
|
|
printf(CS_NAME"%1d: trying to reset the chip.\n", unit);
|
|
outw(iobase+ADD_PORT, PP_SelfCTL);
|
|
i = inw(iobase+DATA_PORT);
|
|
outw(iobase+ADD_PORT, PP_SelfCTL);
|
|
outw(iobase+DATA_PORT, i | POWER_ON_RESET);
|
|
if ((inw(iobase+ADD_PORT) & ADD_MASK) != ADD_SIG)
|
|
return 0;
|
|
}
|
|
|
|
outw(iobase+ADD_PORT, PP_ChipID);
|
|
if (inw(iobase+DATA_PORT) != CHIP_EISA_ID_SIG)
|
|
return 0;
|
|
|
|
rev_type = cs_readreg(iobase, PRODUCT_ID_ADD);
|
|
chip_type = rev_type & ~REVISON_BITS;
|
|
chip_revision = ((rev_type & REVISON_BITS) >> 8) + 'A';
|
|
|
|
sc->nic_addr = iobase;
|
|
sc->chip_type = chip_type;
|
|
if(chip_type==CS8900) {
|
|
pp_isaint = PP_CS8900_ISAINT;
|
|
pp_isadma = PP_CS8900_ISADMA;
|
|
sc->send_cmd = TX_CS8900_AFTER_ALL;
|
|
} else {
|
|
pp_isaint = PP_CS8920_ISAINT;
|
|
pp_isadma = PP_CS8920_ISADMA;
|
|
sc->send_cmd = TX_CS8920_AFTER_ALL;
|
|
}
|
|
|
|
/*
|
|
* Clear some fields so that fail of EEPROM will left them clean
|
|
*/
|
|
sc->auto_neg_cnf = 0;
|
|
sc->adapter_cnf = 0;
|
|
sc->isa_config = 0;
|
|
|
|
/*
|
|
* EEPROM
|
|
*/
|
|
if((cs_readreg(iobase, PP_SelfST) & EEPROM_PRESENT) == 0) {
|
|
printf(CS_NAME"%1d: No EEPROM, assuming defaults.\n",
|
|
unit);
|
|
} else {
|
|
if (get_eeprom_data(sc,START_EEPROM_DATA,CHKSUM_LEN, eeprom_buff)<0) {
|
|
printf(CS_NAME"%1d: EEPROM read failed, "
|
|
"assuming defaults..\n", unit);
|
|
} else {
|
|
if (get_eeprom_cksum(START_EEPROM_DATA,CHKSUM_LEN, eeprom_buff)<0) {
|
|
printf( CS_NAME"%1d: EEPROM cheksum bad, "
|
|
"assuming defaults..\n", unit );
|
|
} else {
|
|
sc->auto_neg_cnf =
|
|
eeprom_buff[AUTO_NEG_CNF_OFFSET/2];
|
|
sc->adapter_cnf =
|
|
eeprom_buff[ADAPTER_CNF_OFFSET/2];
|
|
sc->isa_config =
|
|
eeprom_buff[ISA_CNF_OFFSET/2];
|
|
|
|
for (i=0; i<ETHER_ADDR_LEN/2; i++) {
|
|
sc->arpcom.ac_enaddr[i*2]=
|
|
eeprom_buff[i];
|
|
sc->arpcom.ac_enaddr[i*2+1]=
|
|
eeprom_buff[i] >> 8;
|
|
}
|
|
|
|
/*
|
|
* If no interrupt specified (or "?"),
|
|
* use what the board tells us.
|
|
*/
|
|
if (*dev_irq <= 0) {
|
|
irq = sc->isa_config & INT_NO_MASK;
|
|
if (chip_type==CS8900) {
|
|
switch(irq) {
|
|
case 0: irq=10; break;
|
|
case 1: irq=11; break;
|
|
case 2: irq=12; break;
|
|
case 3: irq=5; break;
|
|
default: printf(CS_NAME"%1d: invalid irq in EEPROM.\n",unit);
|
|
}
|
|
if (irq!=0)
|
|
*dev_irq=(u_short)(1<<irq);
|
|
} else {
|
|
if (irq!=0 && irq<=CS8920_NO_INTS)
|
|
*dev_irq=(u_short)(1<<irq);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
if ((irq=ffs(*dev_irq))) {
|
|
irq--;
|
|
if (chip_type == CS8900) {
|
|
switch(irq) {
|
|
case 5: irq = 3; break;
|
|
case 10: irq = 0; break;
|
|
case 11: irq = 1; break;
|
|
case 12: irq = 2; break;
|
|
default: printf(CS_NAME"%1d: invalid irq\n", unit);
|
|
return 0;
|
|
}
|
|
} else {
|
|
if (irq > CS8920_NO_INTS) {
|
|
printf(CS_NAME"%1d: invalid irq\n", unit);
|
|
return 0;
|
|
}
|
|
}
|
|
cs_writereg(iobase, pp_isaint, irq);
|
|
} else {
|
|
printf(CS_NAME"%1d: invalid irq\n", unit);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Temporary disabled
|
|
*
|
|
if (drq>0)
|
|
cs_writereg(iobase, pp_isadma, drq);
|
|
else {
|
|
printf( CS_NAME"%1d: incorrect drq\n", unit );
|
|
return 0;
|
|
}
|
|
*/
|
|
|
|
if (bootverbose)
|
|
printf(CS_NAME"%1d: model CS89%c0%s rev %c\n"
|
|
CS_NAME"%1d: media%s%s%s\n"
|
|
CS_NAME"%1d: irq %d drq %d\n",
|
|
unit,
|
|
chip_type==CS8900 ? '0' : '2',
|
|
chip_type==CS8920M ? "M" : "",
|
|
chip_revision,
|
|
unit,
|
|
(sc->adapter_cnf & A_CNF_10B_T) ? " TP" : "",
|
|
(sc->adapter_cnf & A_CNF_AUI) ? " AUI" : "",
|
|
(sc->adapter_cnf & A_CNF_10B_2) ? " BNC" : "",
|
|
unit, (int)*dev_irq, (int)*dev_drq);
|
|
|
|
if ((sc->adapter_cnf & A_CNF_EXTND_10B_2) &&
|
|
(sc->adapter_cnf & A_CNF_LOW_RX_SQUELCH))
|
|
sc->line_ctl = LOW_RX_SQUELCH;
|
|
else
|
|
sc->line_ctl = 0;
|
|
|
|
|
|
return PP_ISAIOB;
|
|
}
|
|
|
|
/*
|
|
* Determine if the device is present
|
|
*
|
|
* on entry:
|
|
* a pointer to an isa_device struct
|
|
* on exit:
|
|
* NULL if device not found
|
|
* or # of i/o addresses used (if found)
|
|
*/
|
|
static int
|
|
cs_probe(struct isa_device *dev)
|
|
{
|
|
int nports;
|
|
|
|
struct cs_softc *sc=&cs_softc[dev->id_unit];
|
|
|
|
nports=cs_cs89x0_probe(sc, &(dev->id_irq), &(dev->id_drq),
|
|
(dev->id_iobase), (dev->id_unit), (dev->id_flags));
|
|
|
|
if (nports)
|
|
return (nports);
|
|
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Install the interface into kernel networking data structures
|
|
*/
|
|
static int
|
|
cs_attach(struct cs_softc *sc, int unit, int flags)
|
|
{
|
|
int media=0;
|
|
/* struct cs_softc *sc = &cs_softc[dev->id_unit]; */
|
|
struct ifnet *ifp = &(sc->arpcom.ac_if);
|
|
|
|
if (!ifp->if_name) {
|
|
ifp->if_softc=sc;
|
|
ifp->if_unit=unit;
|
|
ifp->if_name=csdriver.name;
|
|
ifp->if_output=ether_output;
|
|
ifp->if_start=cs_start;
|
|
ifp->if_ioctl=cs_ioctl;
|
|
ifp->if_watchdog=cs_watchdog;
|
|
ifp->if_init=cs_init;
|
|
ifp->if_snd.ifq_maxlen= IFQ_MAXLEN;
|
|
/*
|
|
* MIB DATA
|
|
*/
|
|
/*
|
|
ifp->if_linkmib=&sc->mibdata;
|
|
ifp->if_linkmiblen=sizeof sc->mibdata;
|
|
*/
|
|
|
|
ifp->if_flags=(IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST );
|
|
|
|
/*
|
|
* this code still in progress (DMA support)
|
|
*
|
|
|
|
sc->recv_ring=malloc(CS_DMA_BUFFER_SIZE<<1, M_DEVBUF, M_NOWAIT);
|
|
if (sc->recv_ring == NULL) {
|
|
log(LOG_ERR,CS_NAME
|
|
"%d: Couldn't allocate memory for NIC\n", unit);
|
|
return(0);
|
|
}
|
|
if ((sc->recv_ring-(sc->recv_ring & 0x1FFFF))
|
|
< (128*1024-CS_DMA_BUFFER_SIZE))
|
|
sc->recv_ring+=16*1024;
|
|
|
|
*/
|
|
|
|
sc->buffer=malloc(ETHER_MAX_LEN-ETHER_CRC_LEN,M_DEVBUF,M_NOWAIT);
|
|
if (sc->buffer == NULL) {
|
|
printf(CS_NAME"%d: Couldn't allocate memory for NIC\n",
|
|
unit);
|
|
return(0);
|
|
}
|
|
|
|
/*
|
|
* Initialize the media structures.
|
|
*/
|
|
ifmedia_init(&sc->media, 0, cs_mediachange, cs_mediastatus);
|
|
|
|
if (sc->adapter_cnf & A_CNF_10B_T) {
|
|
ifmedia_add(&sc->media, IFM_ETHER|IFM_10_T, 0, NULL);
|
|
if (sc->chip_type != CS8900) {
|
|
ifmedia_add(&sc->media,
|
|
IFM_ETHER|IFM_10_T|IFM_FDX, 0, NULL);
|
|
ifmedia_add(&sc->media,
|
|
IFM_ETHER|IFM_10_T|IFM_HDX, 0, NULL);
|
|
}
|
|
}
|
|
|
|
if (sc->adapter_cnf & A_CNF_10B_2)
|
|
ifmedia_add(&sc->media, IFM_ETHER|IFM_10_2, 0, NULL);
|
|
|
|
if (sc->adapter_cnf & A_CNF_AUI)
|
|
ifmedia_add(&sc->media, IFM_ETHER|IFM_10_5, 0, NULL);
|
|
|
|
if (sc->adapter_cnf & A_CNF_MEDIA)
|
|
ifmedia_add(&sc->media, IFM_ETHER|IFM_AUTO, 0, NULL);
|
|
|
|
/* Set default media from EEPROM */
|
|
switch (sc->adapter_cnf & A_CNF_MEDIA_TYPE) {
|
|
case A_CNF_MEDIA_AUTO: media = IFM_ETHER|IFM_AUTO; break;
|
|
case A_CNF_MEDIA_10B_T: media = IFM_ETHER|IFM_10_T; break;
|
|
case A_CNF_MEDIA_10B_2: media = IFM_ETHER|IFM_10_2; break;
|
|
case A_CNF_MEDIA_AUI: media = IFM_ETHER|IFM_10_5; break;
|
|
default: printf(CS_NAME"%d: adapter has no media\n", unit);
|
|
}
|
|
ifmedia_set(&sc->media, media);
|
|
cs_mediaset(sc, media);
|
|
|
|
if_attach(ifp);
|
|
cs_stop( sc );
|
|
ether_ifattach(ifp);
|
|
}
|
|
|
|
if (bootverbose)
|
|
printf(CS_NAME"%d: ethernet address %6D\n",
|
|
ifp->if_unit, sc->arpcom.ac_enaddr, ":");
|
|
|
|
bpfattach(ifp, DLT_EN10MB, sizeof (struct ether_header));
|
|
return 1;
|
|
}
|
|
|
|
static int
|
|
cs_attach_isa(struct isa_device *dev)
|
|
{
|
|
int unit=dev->id_unit;
|
|
struct cs_softc *sc=&cs_softc[unit];
|
|
int flags=dev->id_flags;
|
|
|
|
dev->id_ointr = csintr;
|
|
return cs_attach(sc, unit, flags);
|
|
}
|
|
|
|
/*
|
|
* Initialize the board
|
|
*/
|
|
static void
|
|
cs_init(void *xsc)
|
|
{
|
|
struct cs_softc *sc=(struct cs_softc *)xsc;
|
|
struct ifnet *ifp = &sc->arpcom.ac_if;
|
|
int i, s, rx_cfg;
|
|
|
|
/* address not known */
|
|
if (TAILQ_EMPTY(&ifp->if_addrhead)) /* unlikely? XXX */
|
|
return;
|
|
|
|
/*
|
|
* reset whatchdog timer
|
|
*/
|
|
ifp->if_timer=0;
|
|
sc->buf_len = 0;
|
|
|
|
s=splimp();
|
|
|
|
/*
|
|
* Hardware initialization of cs
|
|
*/
|
|
|
|
/* Enable receiver and transmitter */
|
|
cs_writereg(sc->nic_addr, PP_LineCTL,
|
|
cs_readreg( sc->nic_addr, PP_LineCTL ) |
|
|
SERIAL_RX_ON | SERIAL_TX_ON);
|
|
|
|
/* Configure the receiver mode */
|
|
cs_setmode(sc);
|
|
|
|
/*
|
|
* This defines what type of frames will cause interrupts
|
|
* Bad frames should generate interrupts so that the driver
|
|
* could track statistics of discarded packets
|
|
*/
|
|
rx_cfg = RX_OK_ENBL | RX_CRC_ERROR_ENBL | RX_RUNT_ENBL |
|
|
RX_EXTRA_DATA_ENBL;
|
|
if (sc->isa_config & STREAM_TRANSFER)
|
|
rx_cfg |= RX_STREAM_ENBL;
|
|
cs_writereg(sc->nic_addr, PP_RxCFG, rx_cfg);
|
|
|
|
cs_writereg(sc->nic_addr, PP_TxCFG, TX_LOST_CRS_ENBL |
|
|
TX_SQE_ERROR_ENBL | TX_OK_ENBL | TX_LATE_COL_ENBL |
|
|
TX_JBR_ENBL | TX_ANY_COL_ENBL | TX_16_COL_ENBL);
|
|
|
|
cs_writereg(sc->nic_addr, PP_BufCFG, READY_FOR_TX_ENBL |
|
|
RX_MISS_COUNT_OVRFLOW_ENBL | TX_COL_COUNT_OVRFLOW_ENBL |
|
|
TX_UNDERRUN_ENBL /*| RX_DMA_ENBL*/);
|
|
|
|
/* Write MAC address into IA filter */
|
|
for (i=0; i<ETHER_ADDR_LEN/2; i++)
|
|
cs_writereg(sc->nic_addr, PP_IA+i*2,
|
|
sc->arpcom.ac_enaddr[i*2] |
|
|
(sc->arpcom.ac_enaddr[i*2+1] << 8) );
|
|
|
|
/*
|
|
* Now enable everything
|
|
*/
|
|
/*
|
|
#ifdef CS_USE_64K_DMA
|
|
cs_writereg(sc->nic_addr, PP_BusCTL, ENABLE_IRQ | RX_DMA_SIZE_64K);
|
|
#else
|
|
|
|
cs_writereg(sc->nic_addr, PP_BusCTL, ENABLE_IRQ);
|
|
#endif
|
|
*/
|
|
cs_writereg(sc->nic_addr, PP_BusCTL, ENABLE_IRQ);
|
|
|
|
/*
|
|
* Set running and clear output active flags
|
|
*/
|
|
sc->arpcom.ac_if.if_flags |= IFF_RUNNING;
|
|
sc->arpcom.ac_if.if_flags &= ~IFF_OACTIVE;
|
|
|
|
/*
|
|
* Start sending process
|
|
*/
|
|
cs_start(ifp);
|
|
|
|
(void) splx(s);
|
|
}
|
|
|
|
/*
|
|
* Get the packet from the board and send it to the upper layer
|
|
* via ether_input().
|
|
*/
|
|
static int
|
|
cs_get_packet(struct cs_softc *sc)
|
|
{
|
|
struct ifnet *ifp = &(sc->arpcom.ac_if);
|
|
int iobase = sc->nic_addr, status, length;
|
|
struct ether_header *eh;
|
|
struct mbuf *m;
|
|
|
|
#ifdef CS_DEBUG
|
|
int i;
|
|
#endif
|
|
|
|
status = inw(iobase + RX_FRAME_PORT);
|
|
length = inw(iobase + RX_FRAME_PORT);
|
|
|
|
#ifdef CS_DEBUG
|
|
printf(CS_NAME"%1d: rcvd: stat %x, len %d\n",
|
|
ifp->if_unit, status, length);
|
|
#endif
|
|
|
|
if (!(status & RX_OK)) {
|
|
#ifdef CS_DEBUG
|
|
printf(CS_NAME"%1d: bad pkt stat %x\n", ifp->if_unit, status);
|
|
#endif
|
|
ifp->if_ierrors++;
|
|
return -1;
|
|
}
|
|
|
|
MGETHDR(m, M_DONTWAIT, MT_DATA);
|
|
if (m==NULL)
|
|
return -1;
|
|
|
|
if (length > MHLEN) {
|
|
MCLGET(m, M_DONTWAIT);
|
|
if (!(m->m_flags & M_EXT)) {
|
|
m_freem(m);
|
|
return -1;
|
|
}
|
|
}
|
|
|
|
/* Initialize packet's header info */
|
|
m->m_pkthdr.rcvif = ifp;
|
|
m->m_pkthdr.len = length;
|
|
m->m_len = length;
|
|
|
|
/* Get the data */
|
|
insw(iobase + RX_FRAME_PORT, m->m_data, (length+1)>>1);
|
|
|
|
eh = mtod(m, struct ether_header *);
|
|
|
|
if (ifp->if_bpf)
|
|
bpf_mtap(ifp, m);
|
|
|
|
#ifdef CS_DEBUG
|
|
for (i=0;i<length;i++)
|
|
printf(" %02x",(unsigned char)*((char *)(m->m_data+i)));
|
|
printf( "\n" );
|
|
#endif
|
|
|
|
if (status & (RX_IA | RX_BROADCAST) ||
|
|
(ifp->if_flags & IFF_MULTICAST && status & RX_HASHED)) {
|
|
m->m_pkthdr.len -= sizeof(struct ether_header);
|
|
m->m_len -= sizeof(struct ether_header);
|
|
m->m_data += sizeof(struct ether_header);
|
|
|
|
/* Feed the packet to the upper layer */
|
|
ether_input(ifp, eh, m);
|
|
|
|
ifp->if_ipackets++;
|
|
|
|
if (length==ETHER_MAX_LEN-ETHER_CRC_LEN)
|
|
DELAY( cs_recv_delay );
|
|
} else {
|
|
m_freem(m);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Software calls interrupt handler
|
|
*/
|
|
static void
|
|
csintr_sc(struct cs_softc *sc, int unit)
|
|
{
|
|
struct ifnet *ifp = &(sc->arpcom.ac_if);
|
|
int status;
|
|
|
|
#ifdef CS_DEBUG
|
|
printf(CS_NAME"%1d: Interrupt.\n", unit);
|
|
#endif
|
|
|
|
while ((status=cs_readword(sc->nic_addr, ISQ_PORT))) {
|
|
|
|
#ifdef CS_DEBUG
|
|
printf( CS_NAME"%1d:from ISQ: %04x\n", unit, status );
|
|
#endif
|
|
|
|
switch (status & ISQ_EVENT_MASK) {
|
|
case ISQ_RECEIVER_EVENT:
|
|
cs_get_packet(sc);
|
|
break;
|
|
|
|
case ISQ_TRANSMITTER_EVENT:
|
|
if (status & TX_OK)
|
|
ifp->if_opackets++;
|
|
else
|
|
ifp->if_oerrors++;
|
|
ifp->if_flags &= ~IFF_OACTIVE;
|
|
ifp->if_timer = 0;
|
|
break;
|
|
|
|
case ISQ_BUFFER_EVENT:
|
|
if (status & READY_FOR_TX) {
|
|
ifp->if_flags &= ~IFF_OACTIVE;
|
|
ifp->if_timer = 0;
|
|
}
|
|
|
|
if (status & TX_UNDERRUN) {
|
|
ifp->if_flags &= ~IFF_OACTIVE;
|
|
ifp->if_timer = 0;
|
|
ifp->if_oerrors++;
|
|
}
|
|
break;
|
|
|
|
case ISQ_RX_MISS_EVENT:
|
|
ifp->if_ierrors+=(status>>6);
|
|
break;
|
|
|
|
case ISQ_TX_COL_EVENT:
|
|
ifp->if_collisions+=(status>>6);
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (!(ifp->if_flags & IFF_OACTIVE)) {
|
|
cs_start(ifp);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Handle interrupts
|
|
*/
|
|
static void
|
|
csintr(int unit)
|
|
{
|
|
struct cs_softc *sc = &cs_softc[unit];
|
|
|
|
csintr_sc(sc, unit);
|
|
}
|
|
|
|
/*
|
|
* Save the data in buffer
|
|
*/
|
|
|
|
static void
|
|
cs_write_mbufs( struct cs_softc *sc, struct mbuf *m )
|
|
{
|
|
int len;
|
|
struct mbuf *mp;
|
|
unsigned char *data, *buf;
|
|
|
|
for (mp=m, buf=sc->buffer, sc->buf_len=0; mp != NULL; mp=mp->m_next) {
|
|
len = mp->m_len;
|
|
|
|
/*
|
|
* Ignore empty parts
|
|
*/
|
|
if (!len)
|
|
continue;
|
|
|
|
/*
|
|
* Find actual data address
|
|
*/
|
|
data = mtod(mp, caddr_t);
|
|
|
|
bcopy((caddr_t) data, (caddr_t) buf, len);
|
|
buf += len;
|
|
sc->buf_len += len;
|
|
}
|
|
}
|
|
|
|
|
|
static void
|
|
cs_xmit_buf( struct cs_softc *sc )
|
|
{
|
|
outsw(sc->nic_addr+TX_FRAME_PORT, sc->buffer, (sc->buf_len+1)>>1);
|
|
sc->buf_len = 0;
|
|
}
|
|
|
|
static void
|
|
cs_start(struct ifnet *ifp)
|
|
{
|
|
int s, length;
|
|
struct mbuf *m, *mp;
|
|
struct cs_softc *sc = ifp->if_softc;
|
|
|
|
s = splimp();
|
|
|
|
for (;;) {
|
|
if (sc->buf_len)
|
|
length = sc->buf_len;
|
|
else {
|
|
IF_DEQUEUE( &ifp->if_snd, m );
|
|
|
|
if (m==NULL) {
|
|
(void) splx(s);
|
|
return;
|
|
}
|
|
|
|
for (length=0, mp=m; mp != NULL; mp=mp->m_next)
|
|
length += mp->m_len;
|
|
|
|
/* Skip zero-length packets */
|
|
if (length == 0) {
|
|
m_freem(m);
|
|
continue;
|
|
}
|
|
|
|
cs_write_mbufs(sc, m);
|
|
|
|
if (ifp->if_bpf) {
|
|
bpf_mtap(ifp, m);
|
|
}
|
|
|
|
m_freem(m);
|
|
}
|
|
|
|
/*
|
|
* Issue a SEND command
|
|
*/
|
|
outw(sc->nic_addr+TX_CMD_PORT, sc->send_cmd);
|
|
outw(sc->nic_addr+TX_LEN_PORT, length );
|
|
|
|
/*
|
|
* If there's no free space in the buffer then leave
|
|
* this packet for the next time: indicate output active
|
|
* and return.
|
|
*/
|
|
if (!(cs_readreg(sc->nic_addr, PP_BusST) & READY_FOR_TX_NOW)) {
|
|
ifp->if_timer = sc->buf_len;
|
|
(void) splx(s);
|
|
ifp->if_flags |= IFF_OACTIVE;
|
|
return;
|
|
}
|
|
|
|
cs_xmit_buf(sc);
|
|
|
|
/*
|
|
* Set the watchdog timer in case we never hear
|
|
* from board again. (I don't know about correct
|
|
* value for this timeout)
|
|
*/
|
|
ifp->if_timer = length;
|
|
|
|
(void) splx(s);
|
|
ifp->if_flags |= IFF_OACTIVE;
|
|
return;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Stop everything on the interface
|
|
*/
|
|
static void
|
|
cs_stop(struct cs_softc *sc)
|
|
{
|
|
int s = splimp();
|
|
|
|
cs_writereg(sc->nic_addr, PP_RxCFG, 0);
|
|
cs_writereg(sc->nic_addr, PP_TxCFG, 0);
|
|
cs_writereg(sc->nic_addr, PP_BufCFG, 0);
|
|
cs_writereg(sc->nic_addr, PP_BusCTL, 0);
|
|
|
|
sc->arpcom.ac_if.if_flags &= ~(IFF_RUNNING | IFF_OACTIVE);
|
|
sc->arpcom.ac_if.if_timer = 0;
|
|
|
|
(void) splx(s);
|
|
}
|
|
|
|
/*
|
|
* Reset the interface
|
|
*/
|
|
static void
|
|
cs_reset(struct cs_softc *sc)
|
|
{
|
|
cs_stop(sc);
|
|
cs_init(sc);
|
|
}
|
|
|
|
static void
|
|
cs_setmode(struct cs_softc *sc)
|
|
{
|
|
struct ifnet *ifp = &(sc->arpcom.ac_if);
|
|
int rx_ctl;
|
|
|
|
/* Stop the receiver while changing filters */
|
|
cs_writereg(sc->nic_addr, PP_LineCTL,
|
|
cs_readreg(sc->nic_addr, PP_LineCTL) & ~SERIAL_RX_ON);
|
|
|
|
if (ifp->if_flags & IFF_PROMISC) {
|
|
/* Turn on promiscuous mode. */
|
|
rx_ctl = RX_OK_ACCEPT | RX_PROM_ACCEPT;
|
|
} else {
|
|
if (ifp->if_flags & IFF_MULTICAST) {
|
|
/* Allow receiving frames with multicast addresses */
|
|
rx_ctl = RX_IA_ACCEPT | RX_BROADCAST_ACCEPT |
|
|
RX_OK_ACCEPT | RX_MULTCAST_ACCEPT;
|
|
/*
|
|
* Here the reconfiguration of chip's multicast
|
|
* filters should be done but I've no idea about
|
|
* hash transformation in this chip. If you can
|
|
* add this code or describe me the transformation
|
|
* I'd be very glad.
|
|
*/
|
|
} else {
|
|
/*
|
|
* Receive only good frames addressed for us and
|
|
* good broadcasts.
|
|
*/
|
|
rx_ctl = RX_IA_ACCEPT | RX_BROADCAST_ACCEPT |
|
|
RX_OK_ACCEPT;
|
|
}
|
|
}
|
|
|
|
/* Set up the filter */
|
|
cs_writereg(sc->nic_addr, PP_RxCTL, RX_DEF_ACCEPT | rx_ctl);
|
|
|
|
/* Turn on receiver */
|
|
cs_writereg(sc->nic_addr, PP_LineCTL,
|
|
cs_readreg(sc->nic_addr, PP_LineCTL) | SERIAL_RX_ON);
|
|
}
|
|
|
|
static int
|
|
cs_ioctl(register struct ifnet *ifp, u_long command, caddr_t data)
|
|
{
|
|
struct cs_softc *sc=ifp->if_softc;
|
|
struct ifreq *ifr = (struct ifreq *)data;
|
|
int s,error=0;
|
|
|
|
#ifdef CS_DEBUG
|
|
printf(CS_NAME"%d: ioctl(%x)\n",sc->arpcom.ac_if.if_unit,command);
|
|
#endif
|
|
|
|
s=splimp();
|
|
|
|
switch (command) {
|
|
case SIOCSIFADDR:
|
|
case SIOCGIFADDR:
|
|
case SIOCSIFMTU:
|
|
ether_ioctl(ifp, command, data);
|
|
break;
|
|
|
|
case SIOCSIFFLAGS:
|
|
/*
|
|
* Switch interface state between "running" and
|
|
* "stopped", reflecting the UP flag.
|
|
*/
|
|
if (sc->arpcom.ac_if.if_flags & IFF_UP) {
|
|
if ((sc->arpcom.ac_if.if_flags & IFF_RUNNING)==0) {
|
|
cs_init(sc);
|
|
}
|
|
} else {
|
|
if ((sc->arpcom.ac_if.if_flags & IFF_RUNNING)!=0) {
|
|
cs_stop(sc);
|
|
}
|
|
}
|
|
/*
|
|
* Promiscuous and/or multicast flags may have changed,
|
|
* so reprogram the multicast filter and/or receive mode.
|
|
*
|
|
* See note about multicasts in cs_setmode
|
|
*/
|
|
cs_setmode(sc);
|
|
break;
|
|
|
|
case SIOCADDMULTI:
|
|
case SIOCDELMULTI:
|
|
/*
|
|
* Multicast list has changed; set the hardware filter
|
|
* accordingly.
|
|
*
|
|
* See note about multicasts in cs_setmode
|
|
*/
|
|
cs_setmode(sc);
|
|
error = 0;
|
|
break;
|
|
|
|
case SIOCSIFMEDIA:
|
|
case SIOCGIFMEDIA:
|
|
error = ifmedia_ioctl(ifp, ifr, &sc->media, command);
|
|
break;
|
|
|
|
default:
|
|
error = EINVAL;
|
|
}
|
|
|
|
(void) splx(s);
|
|
return error;
|
|
}
|
|
|
|
/*
|
|
* Device timeout/watchdog routine. Entered if the device neglects to
|
|
* generate an interrupt after a transmit has been started on it.
|
|
*/
|
|
static void
|
|
cs_watchdog(struct ifnet *ifp)
|
|
{
|
|
struct cs_softc *sc = &cs_softc[ifp->if_unit];
|
|
|
|
ifp->if_oerrors++;
|
|
log(LOG_ERR, CS_NAME"%d: device timeout\n", ifp->if_unit);
|
|
|
|
/* Reset the interface */
|
|
if (ifp->if_flags & IFF_UP)
|
|
cs_reset(sc);
|
|
else
|
|
cs_stop(sc);
|
|
}
|
|
|
|
static int
|
|
cs_mediachange(struct ifnet *ifp)
|
|
{
|
|
struct cs_softc *sc = ifp->if_softc;
|
|
struct ifmedia *ifm = &sc->media;
|
|
|
|
if (IFM_TYPE(ifm->ifm_media) != IFM_ETHER)
|
|
return EINVAL;
|
|
|
|
return cs_mediaset(sc, ifm->ifm_media);
|
|
}
|
|
|
|
static void
|
|
cs_mediastatus(struct ifnet *ifp, struct ifmediareq *ifmr)
|
|
{
|
|
int line_status;
|
|
struct cs_softc *sc = ifp->if_softc;
|
|
|
|
ifmr->ifm_active = IFM_ETHER;
|
|
line_status = cs_readreg(sc->nic_addr, PP_LineST);
|
|
if (line_status & TENBASET_ON) {
|
|
ifmr->ifm_active |= IFM_10_T;
|
|
if (sc->chip_type != CS8900) {
|
|
if (cs_readreg(sc->nic_addr, PP_AutoNegST) & FDX_ACTIVE)
|
|
ifmr->ifm_active |= IFM_FDX;
|
|
if (cs_readreg(sc->nic_addr, PP_AutoNegST) & HDX_ACTIVE)
|
|
ifmr->ifm_active |= IFM_HDX;
|
|
}
|
|
ifmr->ifm_status = IFM_AVALID;
|
|
if (line_status & LINK_OK)
|
|
ifmr->ifm_status |= IFM_ACTIVE;
|
|
} else {
|
|
if (line_status & AUI_ON) {
|
|
cs_writereg(sc->nic_addr, PP_SelfCTL,
|
|
cs_readreg(sc->nic_addr, PP_SelfCTL) |
|
|
HCB1_ENBL);
|
|
if (((sc->adapter_cnf & A_CNF_DC_DC_POLARITY)!=0)^
|
|
(cs_readreg(sc->nic_addr, PP_SelfCTL)&HCB1))
|
|
ifmr->ifm_active |= IFM_10_2;
|
|
else
|
|
ifmr->ifm_active |= IFM_10_5;
|
|
}
|
|
}
|
|
}
|
|
|
|
static int
|
|
cs_mediaset(struct cs_softc *sc, int media)
|
|
{
|
|
int error;
|
|
|
|
/* Stop the receiver & transmitter */
|
|
cs_writereg(sc->nic_addr, PP_LineCTL,
|
|
cs_readreg(sc->nic_addr, PP_LineCTL) &
|
|
~(SERIAL_RX_ON | SERIAL_TX_ON));
|
|
|
|
#ifdef CS_DEBUG
|
|
printf(CS_NAME"%d: cs_setmedia(%x)\n",sc->arpcom.ac_if.if_unit,media);
|
|
#endif
|
|
|
|
switch (IFM_SUBTYPE(media)) {
|
|
default:
|
|
case IFM_AUTO:
|
|
if ((error=enable_tp(sc))==0)
|
|
error = cs_duplex_auto(sc);
|
|
else if ((error=enable_bnc(sc)) != 0)
|
|
error = enable_aui(sc);
|
|
break;
|
|
case IFM_10_T:
|
|
if ((error=enable_tp(sc)) != 0)
|
|
break;
|
|
if (media & IFM_FDX)
|
|
cs_duplex_full(sc);
|
|
else if (media & IFM_HDX)
|
|
cs_duplex_half(sc);
|
|
else
|
|
error = cs_duplex_auto(sc);
|
|
break;
|
|
case IFM_10_2:
|
|
error = enable_bnc(sc);
|
|
break;
|
|
case IFM_10_5:
|
|
error = enable_aui(sc);
|
|
break;
|
|
}
|
|
|
|
/*
|
|
* Turn the transmitter & receiver back on
|
|
*/
|
|
cs_writereg(sc->nic_addr, PP_LineCTL,
|
|
cs_readreg( sc->nic_addr, PP_LineCTL ) |
|
|
SERIAL_RX_ON | SERIAL_TX_ON);
|
|
|
|
return error;
|
|
}
|
|
|
|
|
|
#if NPNP > 0
|
|
|
|
static struct cspnp_ids {
|
|
u_long vend_id;
|
|
char *id_str;
|
|
} cspnp_ids[]= {
|
|
{ 0x4060630e, "CSC6040" },
|
|
{ 0x10104d24, "IBM EtherJet" },
|
|
{ 0 }
|
|
};
|
|
|
|
static char *cs_pnp_probe(u_long, u_long);
|
|
static void cs_pnp_attach(u_long, u_long, char *, struct isa_device *);
|
|
|
|
struct pnp_device cs_pnp = {
|
|
"CS8920 based PnP Ethernet",
|
|
cs_pnp_probe,
|
|
cs_pnp_attach,
|
|
&cs_unit,
|
|
&net_imask /* imask */
|
|
};
|
|
|
|
DATA_SET (pnpdevice_set, cs_pnp);
|
|
|
|
struct csintr_list {
|
|
struct cs_softc *sc;
|
|
int unit;
|
|
struct csintr_list *next;
|
|
};
|
|
|
|
static struct csintr_list *csintr_head;
|
|
|
|
static void csintr_pnp_add(struct cs_softc *sc, int unit);
|
|
static void csintr_pnp(int unit);
|
|
|
|
static void
|
|
csintr_pnp_add(struct cs_softc *sc, int unit)
|
|
{
|
|
struct csintr_list *intr;
|
|
|
|
if (!sc) return;
|
|
|
|
intr = malloc (sizeof (*intr), M_DEVBUF, M_WAITOK);
|
|
if (!intr) return;
|
|
|
|
intr->sc = sc;
|
|
intr->unit = unit;
|
|
intr->next = csintr_head;
|
|
csintr_head = intr;
|
|
}
|
|
|
|
/*
|
|
* Interrupt handler for PNP installed card
|
|
* We have to find the number of the card.
|
|
*/
|
|
static void
|
|
csintr_pnp(int unit)
|
|
{
|
|
struct csintr_list *intr;
|
|
|
|
for (intr=csintr_head; intr; intr=intr->next) {
|
|
if (intr->unit == unit)
|
|
csintr_sc(intr->sc, unit);
|
|
break;
|
|
}
|
|
}
|
|
|
|
static char *
|
|
cs_pnp_probe(u_long csn, u_long vend_id)
|
|
{
|
|
struct cspnp_ids *ids;
|
|
char *s=NULL;
|
|
|
|
for(ids = cspnp_ids; ids->vend_id != 0; ids++) {
|
|
if (vend_id == ids->vend_id) {
|
|
s = ids->id_str;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (s) {
|
|
struct pnp_cinfo d;
|
|
int ldn = 0;
|
|
|
|
read_pnp_parms(&d, ldn);
|
|
if (d.enable == 0) {
|
|
printf("This is a %s, but LDN %d is disabled\n", s, ldn);
|
|
return NULL ;
|
|
}
|
|
return s;
|
|
}
|
|
|
|
return NULL ;
|
|
}
|
|
|
|
static void
|
|
cs_pnp_attach(u_long csn, u_long vend_id, char *name,
|
|
struct isa_device *dev)
|
|
{
|
|
|
|
struct pnp_cinfo d;
|
|
int ldn = 0;
|
|
int iobase, unit, flags;
|
|
u_int irq;
|
|
int drq;
|
|
struct cs_softc *sc = malloc(sizeof *sc, M_DEVBUF, M_NOWAIT);
|
|
|
|
if (read_pnp_parms ( &d , ldn ) == 0 ) {
|
|
printf("failed to read pnp parms\n");
|
|
return;
|
|
}
|
|
|
|
write_pnp_parms( &d, ldn );
|
|
enable_pnp_card();
|
|
|
|
iobase = dev->id_iobase = d.port[0];
|
|
irq = dev->id_irq = (1 << d.irq[0] );
|
|
drq = dev->id_drq = d.drq[0];
|
|
dev->id_maddr = 0;
|
|
dev->id_ointr = csintr_pnp;
|
|
flags = dev->id_flags = 0;
|
|
unit = dev->id_unit;
|
|
|
|
if (dev->id_driver == NULL) {
|
|
dev->id_driver = &csdriver;
|
|
dev->id_id = isa_compat_nextid();
|
|
}
|
|
|
|
if (!sc) return;
|
|
|
|
bzero(sc, sizeof *sc);
|
|
if (cs_cs89x0_probe(sc, &irq, &drq, iobase, unit, flags) == 0
|
|
|| cs_attach(sc, unit, flags) == 0) {
|
|
free(sc, M_DEVBUF);
|
|
} else {
|
|
if ((irq != dev->id_irq)
|
|
|| (drq != dev->id_drq)
|
|
|| (iobase != dev->id_iobase)
|
|
|| (unit != dev->id_unit)
|
|
|| (flags != dev->id_flags)
|
|
) {
|
|
printf("failed to pnp card parametars\n");
|
|
}
|
|
}
|
|
csintr_pnp_add(sc, dev->id_unit);
|
|
}
|
|
#endif /* NPNP */
|