Andrey V. Elsukov ad43bf348b Allow configuration of several ipsec interfaces with the same tunnel ... endpoints. This can be used to configure several IPsec tunnels between two hosts with different security associations. Obtained from: Yandex LLC MFC after: 2 weeks Sponsored by: Yandex LLC		2018-11-16 14:21:57 +00:00
..
altq	Fix flags collision causing inability to enable CBQ in ALTQ	2018-11-16 03:42:29 +00:00
bpf_buffer.c
bpf_buffer.h
bpf_filter.c
bpf_jitter.c	Make UMA and malloc(9) return non-executable memory in most cases.	2018-06-13 17:04:41 +00:00
bpf_jitter.h	Make UMA and malloc(9) return non-executable memory in most cases.	2018-06-13 17:04:41 +00:00
bpf_zerocopy.c
bpf_zerocopy.h
bpf.c	Use the new VNET_DEFINE_STATIC macro when we are defining static VNET	2018-07-24 16:35:52 +00:00
bpf.h
bpfdesc.h	Move BPFIF_* macro definitions into .c file, where struct bpf_if is	2018-06-19 10:34:45 +00:00
bridgestp.c	UDP: further performance improvements on tx	2018-05-23 21:02:14 +00:00
bridgestp.h
dlt.h	Re-apply r190640.	2018-05-31 09:11:21 +00:00
ethernet.h	Allow to specify PCP on packets not belonging to any VLAN.	2018-03-27 15:29:32 +00:00
firewire.h
ieee8023ad_lacp.c	if_media: Add new 2.5G/5G/25G/40G/50G/100G/200G/400G media types	2018-08-22 18:19:56 +00:00
ieee8023ad_lacp.h
ieee_oui.h
if_arp.h	Remove support for the Arcnet protocol.	2018-04-13 21:18:04 +00:00
if_bridge.c	Use the new VNET_DEFINE_STATIC macro when we are defining static VNET	2018-07-24 16:35:52 +00:00
if_bridgevar.h	Allow different bridge types to coexist	2018-05-11 05:00:40 +00:00
if_clone.c	Use the new VNET_DEFINE_STATIC macro when we are defining static VNET	2018-07-24 16:35:52 +00:00
if_clone.h	iflib(9): Add support for cloning pseudo interfaces	2018-05-11 20:08:28 +00:00
if_dead.c
if_debug.c
if_disc.c	Use the new VNET_DEFINE_STATIC macro when we are defining static VNET	2018-07-24 16:35:52 +00:00
if_dl.h
if_edsc.c	Use the new VNET_DEFINE_STATIC macro when we are defining static VNET	2018-07-24 16:35:52 +00:00
if_enc.c	Use the new VNET_DEFINE_STATIC macro when we are defining static VNET	2018-07-24 16:35:52 +00:00
if_enc.h
if_epair.c	Use the new VNET_DEFINE_STATIC macro when we are defining static VNET	2018-07-24 16:35:52 +00:00
if_ethersubr.c	Initial implementation of draft-ietf-6man-ipv6only-flag.	2018-10-30 20:08:48 +00:00
if_fwsubr.c	Improve copy-and-pasted versions of SIOCGIFADDR.	2018-03-27 20:51:49 +00:00
if_gif.c	Add handling for appearing/disappearing of ingress addresses to if_gif(4).	2018-10-21 18:06:15 +00:00
if_gif.h	Add handling for appearing/disappearing of ingress addresses to if_gif(4).	2018-10-21 18:06:15 +00:00
if_gre.c	Add handling for appearing/disappearing of ingress addresses to if_gre(4).	2018-10-21 18:13:45 +00:00
if_gre.h	Add handling for appearing/disappearing of ingress addresses to if_gre(4).	2018-10-21 18:13:45 +00:00
if_ipsec.c	Allow configuration of several ipsec interfaces with the same tunnel	2018-11-16 14:21:57 +00:00
if_ipsec.h
if_lagg.c	Allow changing lagg(4) MTU.	2018-10-30 09:53:57 +00:00
if_lagg.h	CK: update consumers to use CK macros across the board	2018-05-24 23:21:23 +00:00
if_llatbl.c	Use the new VNET_DEFINE_STATIC macro when we are defining static VNET	2018-07-24 16:35:52 +00:00
if_llatbl.h	CK: update consumers to use CK macros across the board	2018-05-24 23:21:23 +00:00
if_llc.h
if_loop.c	Use the new VNET_DEFINE_STATIC macro when we are defining static VNET	2018-07-24 16:35:52 +00:00
if_me.c	Add the check that current VNET is ready and access to srchash is allowed.	2018-10-23 13:11:45 +00:00
if_media.c	Finish removing FDDI and tokenring media support.	2018-04-23 21:10:33 +00:00
if_media.h	if_media: Add new 2.5G/5G/25G/40G/50G/100G/200G/400G media types	2018-08-22 18:19:56 +00:00
if_mib.c
if_mib.h
if_pflog.h
if_pfsync.h
if_sppp.h
if_spppfr.c
if_spppsubr.c	ifnet: Replace if_addr_lock rwlock with epoch + mutex	2018-05-18 20:13:34 +00:00
if_stf.c	Prevent stf(4) from panicing due to unprotected access to INADDR_HASH.	2018-10-27 04:45:28 +00:00
if_tap.c	Use strlcpy() instead of strncpy().	2018-10-03 07:35:16 +00:00
if_tap.h
if_tapvar.h
if_tun.c	Use strlcpy() instead of strncpy().	2018-10-03 07:35:16 +00:00
if_tun.h
if_types.h
if_var.h	For compatibility KPI functions like if_addr_rlock() that used to have	2018-11-13 22:58:38 +00:00
if_vlan_var.h	Add the ability to look up the 3b PCP of a VLAN interface. Use it in	2018-08-16 23:46:38 +00:00
if_vlan.c	vlan: Fix panic with lagg and vlan	2018-10-21 16:51:35 +00:00
if_vxlan.c	net: fix set but not used	2018-05-19 05:27:49 +00:00
if_vxlan.h	Add support for IPv6 scoped addresses to vxlan	2017-12-30 04:03:53 +00:00
if.c	For compatibility KPI functions like if_addr_rlock() that used to have	2018-11-13 22:58:38 +00:00
if.h	iflib(9): Add support for cloning pseudo interfaces	2018-05-11 20:08:28 +00:00
ifdi_if.m	iflib(9): Add support for cloning pseudo interfaces	2018-05-11 20:08:28 +00:00
iflib_clone.c	iflib(9): Add support for cloning pseudo interfaces	2018-05-11 20:08:28 +00:00
iflib_private.h	ixl/iavf(4): Change ixlv to iavf and update it to use iflib(9)	2018-10-12 22:40:54 +00:00
iflib.c	Clear RX completion queue state veriables in iflib_stop()	2018-11-14 20:36:18 +00:00
iflib.h	ixl/iavf(4): Change ixlv to iavf and update it to use iflib(9)	2018-10-12 22:40:54 +00:00
ifq.h
mp_ring.c	Add knob to control tx ring abdication.	2018-07-20 17:45:26 +00:00
mp_ring.h	Add knob to control tx ring abdication.	2018-07-20 17:45:26 +00:00
mppc.h
mppcc.c
mppcd.c
netisr_internal.h
netisr.c	Use the new VNET_DEFINE_STATIC macro when we are defining static VNET	2018-07-24 16:35:52 +00:00
netisr.h
netmap_legacy.h	netmap: align codebase to the current upstream (commit id 3fb001303718146)	2018-04-12 07:20:50 +00:00
netmap_user.h	netmap: align codebase to the current upstream (sha 8374e1a7e6941)	2018-10-23 08:55:16 +00:00
netmap_virt.h	netmap: align codebase to the current upstream (commit id 3fb001303718146)	2018-04-12 07:20:50 +00:00
netmap.h	netmap: align codebase to the current upstream (sha 8374e1a7e6941)	2018-10-23 08:55:16 +00:00
paravirt.h
pfil.c	netpfil: Introduce PFIL_FWD flag	2018-03-23 16:56:44 +00:00
pfil.h	netpfil: Introduce PFIL_FWD flag	2018-03-23 16:56:44 +00:00
pfkeyv2.h
pfvar.h	pfsync: Handle syncdev going away	2018-11-02 16:57:23 +00:00
ppp_defs.h
radix_mpath.c	Switch RIB and RADIX_NODE_HEAD lock from rwlock(9) to rmlock(9).	2018-06-16 08:26:23 +00:00
radix_mpath.h
radix.c	Switch RIB and RADIX_NODE_HEAD lock from rwlock(9) to rmlock(9).	2018-06-16 08:26:23 +00:00
radix.h	Fix typo.	2018-06-16 19:21:09 +00:00
raw_cb.c
raw_cb.h
raw_usrreq.c
rndis.h
route_var.h	Switch RIB and RADIX_NODE_HEAD lock from rwlock(9) to rmlock(9).	2018-06-16 08:26:23 +00:00
route.c	Use the new VNET_DEFINE_STATIC macro when we are defining static VNET	2018-07-24 16:35:52 +00:00
route.h	Rather than duplicating the functionality of a macro after r322866	2018-09-03 22:10:49 +00:00
rss_config.c
rss_config.h
rtsock.c	Use the new VNET_DEFINE_STATIC macro when we are defining static VNET	2018-07-24 16:35:52 +00:00
sff8436.h
sff8472.h
slcompress.c
slcompress.h
toeplitz.c
toeplitz.h
vnet.c	With more excessive use of modules, more kernel parts working with	2018-10-30 20:45:15 +00:00
vnet.h	Don't mark module data as static on RISC-V.	2018-09-12 08:05:33 +00:00