mirror of
https://git.FreeBSD.org/src.git
synced 2024-12-22 11:17:19 +00:00
ad40259ce6
taking a variable to set need to make sure they protect their locals; if $var_to_set positional argument coincides with a local the expected call to `setvar' will fail to reach outside of the function's namespace. When such collisions are experienced (as I did in the rewrite of usermgmt) the solution is to append a full or abbreviated version of the function name to the local (ultimately eliminating collisions). This is rarely needed and only occurs when you have a lot of like-named functions that pass very similar $var_to_set positional arguments to each other (such as-is the case with an expansive library such as `dialog.subr').
2243 lines
73 KiB
Plaintext
2243 lines
73 KiB
Plaintext
if [ ! "$_DIALOG_SUBR" ]; then _DIALOG_SUBR=1
|
|
#
|
|
# Copyright (c) 2006-2014 Devin Teske
|
|
# All rights reserved.
|
|
#
|
|
# Redistribution and use in source and binary forms, with or without
|
|
# modification, are permitted provided that the following conditions
|
|
# are met:
|
|
# 1. Redistributions of source code must retain the above copyright
|
|
# notice, this list of conditions and the following disclaimer.
|
|
# 2. Redistributions in binary form must reproduce the above copyright
|
|
# notice, this list of conditions and the following disclaimer in the
|
|
# documentation and/or other materials provided with the distribution.
|
|
#
|
|
# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
# ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
# SUCH DAMAGE.
|
|
#
|
|
# $FreeBSD$
|
|
#
|
|
############################################################ INCLUDES
|
|
|
|
BSDCFG_SHARE="/usr/share/bsdconfig"
|
|
. $BSDCFG_SHARE/common.subr || exit 1
|
|
f_dprintf "%s: loading includes..." dialog.subr
|
|
f_include $BSDCFG_SHARE/strings.subr
|
|
f_include $BSDCFG_SHARE/variable.subr
|
|
|
|
BSDCFG_LIBE="/usr/libexec/bsdconfig"
|
|
f_include_lang $BSDCFG_LIBE/include/messages.subr
|
|
|
|
############################################################ CONFIGURATION
|
|
|
|
#
|
|
# Default file descriptor to link to stdout for dialog(1) passthru allowing
|
|
# execution of dialog from within a sub-shell (so-long as its standard output
|
|
# is explicitly redirected to this file descriptor).
|
|
#
|
|
: ${DIALOG_TERMINAL_PASSTHRU_FD:=${TERMINAL_STDOUT_PASSTHRU:-3}}
|
|
|
|
############################################################ GLOBALS
|
|
|
|
#
|
|
# Default name of dialog(1) utility
|
|
# NOTE: This is changed to "Xdialog" by the optional `-X' argument
|
|
#
|
|
DIALOG="dialog"
|
|
|
|
#
|
|
# Default dialog(1) title and backtitle text
|
|
#
|
|
DIALOG_TITLE="$pgm"
|
|
DIALOG_BACKTITLE="bsdconfig"
|
|
|
|
#
|
|
# Settings used while interacting with dialog(1)
|
|
#
|
|
DIALOG_MENU_TAGS="123456789ABCDEFGHIJKLMNOPQRSTUVWYZabcdefghijklmnopqrstuvwxyz"
|
|
|
|
#
|
|
# Declare that we are fully-compliant with Xdialog(1) by unset'ing all
|
|
# compatibility settings.
|
|
#
|
|
unset XDIALOG_HIGH_DIALOG_COMPAT
|
|
unset XDIALOG_FORCE_AUTOSIZE
|
|
unset XDIALOG_INFOBOX_TIMEOUT
|
|
|
|
#
|
|
# Exit codes for [X]dialog(1)
|
|
#
|
|
DIALOG_OK=${SUCCESS:-0}
|
|
DIALOG_CANCEL=${FAILURE:-1}
|
|
DIALOG_HELP=2
|
|
DIALOG_ITEM_HELP=2
|
|
DIALOG_EXTRA=3
|
|
DIALOG_ITEM_HELP=4
|
|
export DIALOG_ERROR=254 # sh(1) can't handle the default of `-1'
|
|
DIALOG_ESC=255
|
|
|
|
#
|
|
# Default behavior is to call f_dialog_init() automatically when loaded.
|
|
#
|
|
: ${DIALOG_SELF_INITIALIZE=1}
|
|
|
|
#
|
|
# Default terminal size (used if/when running without a controlling terminal)
|
|
#
|
|
: ${DEFAULT_TERMINAL_SIZE:=24 80}
|
|
|
|
#
|
|
# Minimum width(s) for various dialog(1) implementations (sensible global
|
|
# default(s) for all widgets of a given variant)
|
|
#
|
|
: ${DIALOG_MIN_WIDTH:=24}
|
|
: ${XDIALOG_MIN_WIDTH:=35}
|
|
|
|
#
|
|
# When manually sizing Xdialog(1) widgets such as calendar and timebox, you'll
|
|
# need to know the size of the embedded GUI objects because the height passed
|
|
# to Xdialog(1) for these widgets has to be tall enough to accomodate them.
|
|
#
|
|
# These values are helpful when manually sizing with dialog(1) too, but in a
|
|
# different way. dialog(1) does not make you accomodate the custom items in the
|
|
# height (but does for width) -- a height of 3 will display three lines and a
|
|
# full calendar, for example (whereas Xdialog will truncate the calendar if
|
|
# given a height of 3). For dialog(1), use these values for making sure that
|
|
# the height does not exceed max_height (obtained by f_dialog_max_size()).
|
|
#
|
|
DIALOG_CALENDAR_HEIGHT=15
|
|
DIALOG_TIMEBOX_HEIGHT=6
|
|
|
|
############################################################ GENERIC FUNCTIONS
|
|
|
|
# f_dialog_data_sanitize $var_to_edit ...
|
|
#
|
|
# When using dialog(1) or Xdialog(1) sometimes unintended warnings or errors
|
|
# are generated from underlying libraries. For example, if $LANG is set to an
|
|
# invalid or unknown locale, the warnings from the Xdialog(1) libraries will
|
|
# clutter the output. This function helps by providing a centralied function
|
|
# that removes spurious warnings from the dialog(1) (or Xdialog(1)) response.
|
|
#
|
|
# Simply pass the name of one or more variables that need to be sanitized.
|
|
# After execution, the variables will hold their newly-sanitized data.
|
|
#
|
|
f_dialog_data_sanitize()
|
|
{
|
|
if [ "$#" -eq 0 ]; then
|
|
f_dprintf "%s: called with zero arguments" \
|
|
f_dialog_response_sanitize
|
|
return $FAILURE
|
|
fi
|
|
|
|
local __var_to_edit
|
|
for __var_to_edit in $*; do
|
|
# Skip warnings and trim leading/trailing whitespace
|
|
setvar $__var_to_edit "$( f_getvar $__var_to_edit | awk '
|
|
BEGIN { data = 0 }
|
|
{
|
|
if ( ! data )
|
|
{
|
|
if ( $0 ~ /^$/ ) next
|
|
if ( $0 ~ /^Gdk-WARNING \*\*:/ ) next
|
|
data = 1
|
|
}
|
|
print
|
|
}
|
|
' )"
|
|
done
|
|
}
|
|
|
|
# f_dialog_line_sanitize $var_to_edit ...
|
|
#
|
|
# When using dialog(1) or Xdialog(1) sometimes unintended warnings or errors
|
|
# are generated from underlying libraries. For example, if $LANG is set to an
|
|
# invalid or unknown locale, the warnings from the Xdialog(1) libraries will
|
|
# clutter the output. This function helps by providing a centralied function
|
|
# that removes spurious warnings from the dialog(1) (or Xdialog(1)) response.
|
|
#
|
|
# Simply pass the name of one or more variables that need to be sanitized.
|
|
# After execution, the variables will hold their newly-sanitized data.
|
|
#
|
|
# This function, unlike f_dialog_data_sanitize(), also removes leading/trailing
|
|
# whitespace from each line.
|
|
#
|
|
f_dialog_line_sanitize()
|
|
{
|
|
if [ "$#" -eq 0 ]; then
|
|
f_dprintf "%s: called with zero arguments" \
|
|
f_dialog_response_sanitize
|
|
return $FAILURE
|
|
fi
|
|
|
|
local __var_to_edit
|
|
for __var_to_edit in $*; do
|
|
# Skip warnings and trim leading/trailing whitespace
|
|
setvar $__var_to_edit "$( f_getvar $__var_to_edit | awk '
|
|
BEGIN { data = 0 }
|
|
{
|
|
if ( ! data )
|
|
{
|
|
if ( $0 ~ /^$/ ) next
|
|
if ( $0 ~ /^Gdk-WARNING \*\*:/ ) next
|
|
data = 1
|
|
}
|
|
sub(/^[[:space:]]*/, "")
|
|
sub(/[[:space:]]*$/, "")
|
|
print
|
|
}
|
|
' )"
|
|
done
|
|
}
|
|
|
|
############################################################ TITLE FUNCTIONS
|
|
|
|
# f_dialog_title [$new_title]
|
|
#
|
|
# Set the title of future dialog(1) ($DIALOG_TITLE) or backtitle of Xdialog(1)
|
|
# ($DIALOG_BACKTITLE) invocations. If no arguments are given or the first
|
|
# argument is NULL, the current title is returned.
|
|
#
|
|
# Each time this function is called, a backup of the current values is made
|
|
# allowing a one-time (single-level) restoration of the previous title using
|
|
# the f_dialog_title_restore() function (below).
|
|
#
|
|
f_dialog_title()
|
|
{
|
|
local new_title="$1"
|
|
|
|
if [ "${1+set}" ]; then
|
|
if [ "$USE_XDIALOG" ]; then
|
|
_DIALOG_BACKTITLE="$DIALOG_BACKTITLE"
|
|
DIALOG_BACKTITLE="$new_title"
|
|
else
|
|
_DIALOG_TITLE="$DIALOG_TITLE"
|
|
DIALOG_TITLE="$new_title"
|
|
fi
|
|
else
|
|
if [ "$USE_XDIALOG" ]; then
|
|
echo "$DIALOG_BACKTITLE"
|
|
else
|
|
echo "$DIALOG_TITLE"
|
|
fi
|
|
fi
|
|
}
|
|
|
|
# f_dialog_title_restore
|
|
#
|
|
# Restore the previous title set by the last call to f_dialog_title().
|
|
# Restoration is non-recursive and only works to restore the most-recent title.
|
|
#
|
|
f_dialog_title_restore()
|
|
{
|
|
if [ "$USE_XDIALOG" ]; then
|
|
DIALOG_BACKTITLE="$_DIALOG_BACKTITLE"
|
|
else
|
|
DIALOG_TITLE="$_DIALOG_TITLE"
|
|
fi
|
|
}
|
|
|
|
# f_dialog_backtitle [$new_backtitle]
|
|
#
|
|
# Set the backtitle of future dialog(1) ($DIALOG_BACKTITLE) or title of
|
|
# Xdialog(1) ($DIALOG_TITLE) invocations. If no arguments are given or the
|
|
# first argument is NULL, the current backtitle is returned.
|
|
#
|
|
f_dialog_backtitle()
|
|
{
|
|
local new_backtitle="$1"
|
|
|
|
if [ "${1+set}" ]; then
|
|
if [ "$USE_XDIALOG" ]; then
|
|
_DIALOG_TITLE="$DIALOG_TITLE"
|
|
DIALOG_TITLE="$new_backtitle"
|
|
else
|
|
_DIALOG_BACKTITLE="$DIALOG_BACKTITLE"
|
|
DIALOG_BACKTITLE="$new_backtitle"
|
|
fi
|
|
else
|
|
if [ "$USE_XDIALOG" ]; then
|
|
echo "$DIALOG_TITLE"
|
|
else
|
|
echo "$DIALOG_BACKTITLE"
|
|
fi
|
|
fi
|
|
}
|
|
|
|
# f_dialog_backtitle_restore
|
|
#
|
|
# Restore the previous backtitle set by the last call to f_dialog_backtitle().
|
|
# Restoration is non-recursive and only works to restore the most-recent
|
|
# backtitle.
|
|
#
|
|
f_dialog_backtitle_restore()
|
|
{
|
|
if [ "$USE_XDIALOG" ]; then
|
|
DIALOG_TITLE="$_DIALOG_TITLE"
|
|
else
|
|
DIALOG_BACKTITLE="$_DIALOG_BACKTITLE"
|
|
fi
|
|
}
|
|
|
|
############################################################ SIZE FUNCTIONS
|
|
|
|
# f_dialog_max_size $var_height $var_width
|
|
#
|
|
# Get the maximum height and width for a dialog widget and store the values in
|
|
# $var_height and $var_width (respectively).
|
|
#
|
|
f_dialog_max_size()
|
|
{
|
|
local funcname=f_dialog_max_size
|
|
local __var_height="$1" __var_width="$2" __max_size
|
|
[ "$__var_height" -o "$__var_width" ] || return $FAILURE
|
|
if [ "$USE_XDIALOG" ]; then
|
|
__max_size="$XDIALOG_MAXSIZE" # see CONFIGURATION
|
|
else
|
|
if __max_size=$( $DIALOG --print-maxsize \
|
|
2>&1 >&$DIALOG_TERMINAL_PASSTHRU_FD )
|
|
then
|
|
f_dprintf "$funcname: %s --print-maxsize = [%s]" \
|
|
"$DIALOG" "$__max_size"
|
|
# usually "MaxSize: 24, 80"
|
|
__max_size="${__max_size#*: }"
|
|
f_replaceall "$__max_size" "," "" __max_size
|
|
else
|
|
f_eval_catch -dk __max_size $funcname stty \
|
|
'stty size' || __max_size=
|
|
# usually "24 80"
|
|
fi
|
|
: ${__max_size:=$DEFAULT_TERMINAL_SIZE}
|
|
fi
|
|
if [ "$__var_height" ]; then
|
|
local __height="${__max_size%%[$IFS]*}"
|
|
#
|
|
# If we're not using Xdialog(1), we should assume that $DIALOG
|
|
# will render --backtitle behind the widget. In such a case, we
|
|
# should prevent a widget from obscuring the backtitle (unless
|
|
# $NO_BACKTITLE is set and non-NULL, allowing a trap-door).
|
|
#
|
|
if [ ! "$USE_XDIALOG" ] && [ ! "$NO_BACKTITLE" ]; then
|
|
#
|
|
# If use_shadow (in ~/.dialogrc) is OFF, we need to
|
|
# subtract 4, otherwise 5. However, don't check this
|
|
# every time, rely on an initialization variable set
|
|
# by f_dialog_init().
|
|
#
|
|
local __adjust=5
|
|
[ "$NO_SHADOW" ] && __adjust=4
|
|
|
|
# Don't adjust height if already too small (allowing
|
|
# obscured backtitle for small values of __height).
|
|
[ ${__height:-0} -gt 11 ] &&
|
|
__height=$(( $__height - $__adjust ))
|
|
fi
|
|
setvar "$__var_height" "$__height"
|
|
fi
|
|
[ "$__var_width" ] && setvar "$__var_width" "${__max_size##*[$IFS]}"
|
|
}
|
|
|
|
# f_dialog_size_constrain $var_height $var_width [$min_height [$min_width]]
|
|
#
|
|
# Modify $var_height to be no-less-than $min_height (if given; zero otherwise)
|
|
# and no-greater-than terminal height (or screen height if $USE_XDIALOG is
|
|
# set).
|
|
#
|
|
# Also modify $var_width to be no-less-than $XDIALOG_MIN_WIDTH (or
|
|
# $XDIALOG_MIN_WIDTH if $_USE_XDIALOG is set) and no-greater-than terminal
|
|
# or screen width. The use of $[X]DIALOG_MIN_WIDTH can be overridden by
|
|
# passing $min_width.
|
|
#
|
|
# Return status is success unless one of the passed arguments is invalid
|
|
# or all of the $var_* arguments are either NULL or missing.
|
|
#
|
|
f_dialog_size_constrain()
|
|
{
|
|
local __var_height="$1" __var_width="$2"
|
|
local __min_height="$3" __min_width="$4"
|
|
local __retval=$SUCCESS
|
|
|
|
# Return failure unless at least one var_* argument is passed
|
|
[ "$__var_height" -o "$__var_width" ] || return $FAILURE
|
|
|
|
#
|
|
# Print debug warnings if any given (non-NULL) argument are invalid
|
|
# NOTE: Don't change the name of $__{var,min,}{height,width}
|
|
#
|
|
local __height __width
|
|
local __arg __cp __fname=f_dialog_size_constrain
|
|
for __arg in height width; do
|
|
debug= f_getvar __var_$__arg __cp
|
|
[ "$__cp" ] || continue
|
|
if ! debug= f_getvar "$__cp" __$__arg; then
|
|
f_dprintf "%s: var_%s variable \`%s' not set" \
|
|
$__fname $__arg "$__cp"
|
|
__retval=$FAILURE
|
|
elif ! eval f_isinteger \$__$__arg; then
|
|
f_dprintf "%s: var_%s variable value not a number" \
|
|
$__fname $__arg
|
|
__retval=$FAILURE
|
|
fi
|
|
done
|
|
for __arg in height width; do
|
|
debug= f_getvar __min_$__arg __cp
|
|
[ "$__cp" ] || continue
|
|
f_isinteger "$__cp" && continue
|
|
f_dprintf "%s: min_%s value not a number" $__fname $__arg
|
|
__retval=$FAILURE
|
|
setvar __min_$__arg ""
|
|
done
|
|
|
|
# Obtain maximum height and width values
|
|
# NOTE: Function name appended to prevent __var_{height,width} values
|
|
# from becoming local (and thus preventing setvar from working).
|
|
local __max_height_size_constain __max_width_size_constrain
|
|
f_dialog_max_size \
|
|
__max_height_size_constrain __max_width_size_constrain
|
|
|
|
# Adjust height if desired
|
|
if [ "$__var_height" ]; then
|
|
if [ $__height -lt ${__min_height:-0} ]; then
|
|
setvar "$__var_height" $__min_height
|
|
elif [ $__height -gt $__max_height_size_constrain ]; then
|
|
setvar "$__var_height" $__max_height_size_constrain
|
|
fi
|
|
fi
|
|
|
|
# Adjust width if desired
|
|
if [ "$__var_width" ]; then
|
|
if [ "$USE_XDIALOG" ]; then
|
|
: ${__min_width:=${XDIALOG_MIN_WIDTH:-35}}
|
|
else
|
|
: ${__min_width:=${DIALOG_MIN_WIDTH:-24}}
|
|
fi
|
|
if [ $__width -lt $__min_width ]; then
|
|
setvar "$__var_width" $__min_width
|
|
elif [ $__width -gt $__max_width_size_constrain ]; then
|
|
setvar "$__var_width" $__max_width_size_constrain
|
|
fi
|
|
fi
|
|
|
|
if [ "$debug" ]; then
|
|
# Print final constrained values to debugging
|
|
[ "$__var_height" ] && f_quietly f_getvar "$__var_height"
|
|
[ "$__var_width" ] && f_quietly f_getvar "$__var_width"
|
|
fi
|
|
|
|
return $__retval # success if no debug warnings were printed
|
|
}
|
|
|
|
# f_dialog_menu_constrain $var_height $var_width $var_rows "$prompt" \
|
|
# [$min_height [$min_width [$min_rows]]]
|
|
#
|
|
# Modify $var_height to be no-less-than $min_height (if given; zero otherwise)
|
|
# and no-greater-than terminal height (or screen height if $USE_XDIALOG is
|
|
# set).
|
|
#
|
|
# Also modify $var_width to be no-less-than $XDIALOG_MIN_WIDTH (or
|
|
# $XDIALOG_MIN_WIDTH if $_USE_XDIALOG is set) and no-greater-than terminal
|
|
# or screen width. The use of $[X]DIALOG_MIN_WIDTH can be overridden by
|
|
# passing $min_width.
|
|
#
|
|
# Last, modify $var_rows to be no-less-than $min_rows (if specified; zero
|
|
# otherwise) and no-greater-than (max_height - 8) where max_height is the
|
|
# terminal height (or screen height if $USE_XDIALOG is set). If $prompt is NULL
|
|
# or missing, dialog(1) allows $var_rows to be (max_height - 7), maximizing the
|
|
# number of visible rows.
|
|
#
|
|
# Return status is success unless one of the passed arguments is invalid
|
|
# or all of the $var_* arguments are either NULL or missing.
|
|
#
|
|
f_dialog_menu_constrain()
|
|
{
|
|
local __var_height="$1" __var_width="$2" __var_rows="$3" __prompt="$4"
|
|
local __min_height="$5" __min_width="$6" __min_rows="$7"
|
|
|
|
# Return failure unless at least one var_* argument is passed
|
|
[ "$__var_height" -o "$__var_width" -o "$__var_rows" ] ||
|
|
return $FAILURE
|
|
|
|
#
|
|
# Print debug warnings if any given (non-NULL) argument are invalid
|
|
# NOTE: Don't change the name of $__{var,min,}{height,width,rows}
|
|
#
|
|
local __height_menu_constrain __width_menu_constrain
|
|
local __rows_menu_constrain
|
|
local __arg __cp __fname=f_dialog_menu_constrain
|
|
for __arg in height width rows; do
|
|
debug= f_getvar __var_$__arg __cp
|
|
[ "$__cp" ] || continue
|
|
if ! debug= f_getvar "$__cp" __${__arg}_menu_constrain; then
|
|
f_dprintf "%s: var_%s variable \`%s' not set" \
|
|
$__fname $__arg "$__cp"
|
|
__retval=$FAILURE
|
|
elif ! eval f_isinteger \$__${__arg}_menu_constrain; then
|
|
f_dprintf "%s: var_%s variable value not a number" \
|
|
$__fname $__arg
|
|
__retval=$FAILURE
|
|
fi
|
|
done
|
|
for __arg in height width rows; do
|
|
debug= f_getvar __min_$__arg __cp
|
|
[ "$__cp" ] || continue
|
|
f_isinteger "$__cp" && continue
|
|
f_dprintf "%s: min_%s value not a number" $__fname $__arg
|
|
__retval=$FAILURE
|
|
setvar __min_$__arg ""
|
|
done
|
|
|
|
# Obtain maximum height and width values
|
|
# NOTE: Function name appended to prevent __var_{height,width} values
|
|
# from becoming local (and thus preventing setvar from working).
|
|
local __max_height_menu_constrain __max_width_menu_constrain
|
|
f_dialog_max_size \
|
|
__max_height_menu_constrain __max_width_menu_constrain
|
|
|
|
# Adjust height if desired
|
|
if [ "$__var_height" ]; then
|
|
if [ $__height_menu_constrain -lt ${__min_height:-0} ]; then
|
|
setvar "$__var_height" $__min_height
|
|
elif [ $__height_menu_constrain -gt \
|
|
$__max_height_menu_constrain ]
|
|
then
|
|
setvar "$__var_height" $__max_height_menu_constrain
|
|
fi
|
|
fi
|
|
|
|
# Adjust width if desired
|
|
if [ "$__var_width" ]; then
|
|
if [ "$USE_XDIALOG" ]; then
|
|
: ${__min_width:=${XDIALOG_MIN_WIDTH:-35}}
|
|
else
|
|
: ${__min_width:=${DIALOG_MIN_WIDTH:-24}}
|
|
fi
|
|
if [ $__width_menu_constrain -lt $__min_width ]; then
|
|
setvar "$__var_width" $__min_width
|
|
elif [ $__width_menu_constrain -gt \
|
|
$__max_width_menu_constrain ]
|
|
then
|
|
setvar "$__var_width" $__max_width_menu_constrain
|
|
fi
|
|
fi
|
|
|
|
# Adjust rows if desired
|
|
if [ "$__var_rows" ]; then
|
|
if [ "$USE_XDIALOG" ]; then
|
|
: ${__min_rows:=1}
|
|
else
|
|
: ${__min_rows:=0}
|
|
fi
|
|
|
|
local __max_rows_menu_constrain=$((
|
|
$__max_height_menu_constrain - 7
|
|
))
|
|
# If prompt_len is zero (no prompt), bump the max-rows by 1
|
|
# Default assumption is (if no argument) that there's no prompt
|
|
[ ${__prompt_len:-0} -gt 0 ] || __max_rows_menu_constrain=$((
|
|
$__max_rows_menu_constrain + 1
|
|
))
|
|
|
|
if [ $__rows_menu_constrain -lt $__min_rows ]; then
|
|
setvar "$__var_rows" $__min_rows
|
|
elif [ $__rows_menu_constrain -gt $__max_rows_menu_constrain ]
|
|
then
|
|
setvar "$__var_rows" $__max_rows_menu_constrain
|
|
fi
|
|
fi
|
|
|
|
if [ "$debug" ]; then
|
|
# Print final constrained values to debugging
|
|
[ "$__var_height" ] && f_quietly f_getvar "$__var_height"
|
|
[ "$__var_width" ] && f_quietly f_getvar "$__var_width"
|
|
[ "$__var_rows" ] && f_quietly f_getvar "$__var_rows"
|
|
fi
|
|
|
|
return $__retval # success if no debug warnings were printed
|
|
}
|
|
|
|
# f_dialog_infobox_size [-n] $var_height $var_width \
|
|
# $title $backtitle $prompt [$hline]
|
|
#
|
|
# Not all versions of dialog(1) perform auto-sizing of the width and height of
|
|
# `--infobox' boxes sensibly.
|
|
#
|
|
# This function helps solve this issue by taking two sets of sequential
|
|
# arguments. The first set of arguments are the variable names to use when
|
|
# storing the calculated height and width. The second set of arguments are the
|
|
# title, backtitle, prompt, and [optionally] hline. The optimal height and
|
|
# width for the described widget (not exceeding the actual terminal height or
|
|
# width) is stored in $var_height and $var_width (respectively).
|
|
#
|
|
# If the first argument is `-n', the calculated sizes ($var_height and
|
|
# $var_width) are not constrained to minimum/maximum values.
|
|
#
|
|
# Newline character sequences (``\n'') in $prompt are expanded as-is done by
|
|
# dialog(1).
|
|
#
|
|
f_dialog_infobox_size()
|
|
{
|
|
local __constrain=1
|
|
[ "$1" = "-n" ] && __constrain= && shift 1 # -n
|
|
local __var_height="$1" __var_width="$2"
|
|
local __title="$3" __btitle="$4" __prompt="$5" __hline="$6"
|
|
|
|
# Return unless at least one size aspect has been requested
|
|
[ "$__var_height" -o "$__var_width" ] || return $FAILURE
|
|
|
|
# Default height/width of zero for auto-sizing
|
|
local __height=0 __width=0 __n
|
|
|
|
# Adjust height if desired
|
|
if [ "$__var_height" ]; then
|
|
#
|
|
# Set height based on number of rows in prompt
|
|
#
|
|
__n=$( echo -n "$__prompt" | f_number_of_lines )
|
|
__n=$(( $__n + 2 ))
|
|
[ $__n -gt $__height ] && __height=$__n
|
|
|
|
#
|
|
# For Xdialog(1) bump height if backtitle is enabled (displayed
|
|
# in the X11 window with a separator line between the backtitle
|
|
# and msg text).
|
|
#
|
|
if [ "$USE_XDIALOG" -a "$__btitle" ]; then
|
|
__n=$( echo "$__btitle" | f_number_of_lines )
|
|
__height=$(( $__height + $__n + 2 ))
|
|
fi
|
|
|
|
setvar "$__var_height" $__height
|
|
fi
|
|
|
|
# Adjust width if desired
|
|
if [ "$__var_width" ]; then
|
|
#
|
|
# Bump width for long titles
|
|
#
|
|
__n=$(( ${#__title} + 4 ))
|
|
[ $__n -gt $__width ] && __width=$__n
|
|
|
|
#
|
|
# If using Xdialog(1), bump width for long backtitles (which
|
|
# appear within the window).
|
|
#
|
|
if [ "$USE_XDIALOG" ]; then
|
|
__n=$(( ${#__btitle} + 4 ))
|
|
[ $__n -gt $__width ] && __width=$__n
|
|
fi
|
|
|
|
#
|
|
# Bump width for long prompts
|
|
#
|
|
__n=$( echo "$__prompt" | f_longest_line_length )
|
|
__n=$(( $__n + 4 )) # add width for border
|
|
[ $__n -gt $__width ] && __width=$__n
|
|
|
|
#
|
|
# Bump width for long hlines. Xdialog(1) supports `--hline' but
|
|
# it's currently not used (so don't do anything here if using
|
|
# Xdialog(1)).
|
|
#
|
|
if [ ! "$USE_XDIALOG" ]; then
|
|
__n=$(( ${#__hline} + 10 ))
|
|
[ $__n -gt $__width ] && __width=$__n
|
|
fi
|
|
|
|
# Bump width by 16.6% if using Xdialog(1)
|
|
[ "$USE_XDIALOG" ] && __width=$(( $__width + $__width / 6 ))
|
|
|
|
setvar "$__var_width" $__width
|
|
fi
|
|
|
|
# Constrain values to sensible minimums/maximums unless `-n' was passed
|
|
# Return success if no-constrain, else return status from constrain
|
|
[ ! "$__constrain" ] ||
|
|
f_dialog_size_constrain "$__var_height" "$__var_width"
|
|
}
|
|
|
|
# f_dialog_buttonbox_size [-n] $var_height $var_width \
|
|
# $title $backtitle $prompt [$hline]
|
|
#
|
|
# Not all versions of dialog(1) perform auto-sizing of the width and height of
|
|
# `--msgbox' and `--yesno' boxes sensibly.
|
|
#
|
|
# This function helps solve this issue by taking two sets of sequential
|
|
# arguments. The first set of arguments are the variable names to use when
|
|
# storing the calculated height and width. The second set of arguments are the
|
|
# title, backtitle, prompt, and [optionally] hline. The optimal height and
|
|
# width for the described widget (not exceeding the actual terminal height or
|
|
# width) is stored in $var_height and $var_width (respectively).
|
|
#
|
|
# If the first argument is `-n', the calculated sizes ($var_height and
|
|
# $var_width) are not constrained to minimum/maximum values.
|
|
#
|
|
# Newline character sequences (``\n'') in $prompt are expanded as-is done by
|
|
# dialog(1).
|
|
#
|
|
f_dialog_buttonbox_size()
|
|
{
|
|
local __constrain=1
|
|
[ "$1" = "-n" ] && __constrain= && shift 1 # -n
|
|
local __var_height="$1" __var_width="$2"
|
|
local __title="$3" __btitle="$4" __prompt="$5" __hline="$6"
|
|
|
|
# Return unless at least one size aspect has been requested
|
|
[ "$__var_height" -o "$__var_width" ] || return $FAILURE
|
|
|
|
# Calculate height/width of infobox (adjusted/constrained below)
|
|
# NOTE: Function name appended to prevent __var_{height,width} values
|
|
# from becoming local (and thus preventing setvar from working).
|
|
local __height_bbox_size __width_bbox_size
|
|
f_dialog_infobox_size -n \
|
|
"${__var_height:+__height_bbox_size}" \
|
|
"${__var_width:+__width_bbox_size}" \
|
|
"$__title" "$__btitle" "$__prompt" "$__hline"
|
|
|
|
# Adjust height if desired
|
|
if [ "$__var_height" ]; then
|
|
# Add height to accomodate the buttons
|
|
__height_bbox_size=$(( $__height_bbox_size + 2 ))
|
|
|
|
# Adjust for clipping with Xdialog(1) on Linux/GTK2
|
|
[ "$USE_XDIALOG" ] &&
|
|
__height_bbox_size=$(( $__height_bbox_size + 3 ))
|
|
|
|
setvar "$__var_height" $__height_bbox_size
|
|
fi
|
|
|
|
# No adjustemnts to width, just pass-thru the infobox width
|
|
if [ "$__var_width" ]; then
|
|
setvar "$__var_width" $__width_bbox_size
|
|
fi
|
|
|
|
# Constrain values to sensible minimums/maximums unless `-n' was passed
|
|
# Return success if no-constrain, else return status from constrain
|
|
[ ! "$__constrain" ] ||
|
|
f_dialog_size_constrain "$__var_height" "$__var_width"
|
|
}
|
|
|
|
# f_dialog_inputbox_size [-n] $var_height $var_width \
|
|
# $title $backtitle $prompt $init [$hline]
|
|
#
|
|
# Not all versions of dialog(1) perform auto-sizing of the width and height of
|
|
# `--inputbox' boxes sensibly.
|
|
#
|
|
# This function helps solve this issue by taking two sets of sequential
|
|
# arguments. The first set of arguments are the variable names to use when
|
|
# storing the calculated height and width. The second set of arguments are the
|
|
# title, backtitle, prompt, and [optionally] hline. The optimal height and
|
|
# width for the described widget (not exceeding the actual terminal height or
|
|
# width) is stored in $var_height and $var_width (respectively).
|
|
#
|
|
# If the first argument is `-n', the calculated sizes ($var_height and
|
|
# $var_width) are not constrained to minimum/maximum values.
|
|
#
|
|
# Newline character sequences (``\n'') in $prompt are expanded as-is done by
|
|
# dialog(1).
|
|
#
|
|
f_dialog_inputbox_size()
|
|
{
|
|
local __constrain=1
|
|
[ "$1" = "-n" ] && __constrain= && shift 1 # -n
|
|
local __var_height="$1" __var_width="$2"
|
|
local __title="$3" __btitle="$4" __prompt="$5" __init="$6" __hline="$7"
|
|
|
|
# Return unless at least one size aspect has been requested
|
|
[ "$__var_height" -o "$__var_width" ] || return $FAILURE
|
|
|
|
# Calculate height/width of buttonbox (adjusted/constrained below)
|
|
# NOTE: Function name appended to prevent __var_{height,width} values
|
|
# from becoming local (and thus preventing setvar from working).
|
|
local __height_ibox_size __width_ibox_size
|
|
f_dialog_buttonbox_size -n \
|
|
"${__var_height:+__height_ibox_size}" \
|
|
"${__var_width:+__width_ibox_size}" \
|
|
"$__title" "$__btitle" "$__prompt" "$__hline"
|
|
|
|
# Adjust height if desired
|
|
if [ "$__var_height" ]; then
|
|
# Add height for input box (not needed for Xdialog(1))
|
|
[ ! "$USE_XDIALOG" ] &&
|
|
__height_ibox_size=$(( $__height_ibox_size + 3 ))
|
|
|
|
setvar "$__var_height" $__height_ibox_size
|
|
fi
|
|
|
|
# Adjust width if desired
|
|
if [ "$__var_width" ]; then
|
|
# Bump width for initial text (something neither dialog(1) nor
|
|
# Xdialog(1) do, but worth it!; add 16.6% if using Xdialog(1))
|
|
local __n=$(( ${#__init} + 7 ))
|
|
[ "$USE_XDIALOG" ] && __n=$(( $__n + $__n / 6 ))
|
|
[ $__n -gt $__width_ibox_size ] && __width_ibox_size=$__n
|
|
|
|
setvar "$__var_width" $__width_ibox_size
|
|
fi
|
|
|
|
# Constrain values to sensible minimums/maximums unless `-n' was passed
|
|
# Return success if no-constrain, else return status from constrain
|
|
[ ! "$__constrain" ] ||
|
|
f_dialog_size_constrain "$__var_height" "$__var_width"
|
|
}
|
|
|
|
# f_xdialog_2inputsbox_size [-n] $var_height $var_width \
|
|
# $title $backtitle $prompt \
|
|
# $label1 $init1 $label2 $init2
|
|
#
|
|
# Xdialog(1) does not perform auto-sizing of the width and height of
|
|
# `--2inputsbox' boxes sensibly.
|
|
#
|
|
# This function helps solve this issue by taking two sets of sequential
|
|
# arguments. The first set of arguments are the variable names to use when
|
|
# storing the calculated height and width. The second set of arguments are the
|
|
# title, backtitle, prompt, label for the first field, initial text for said
|
|
# field, label for the second field, and initial text for said field. The
|
|
# optimal height and width for the described widget (not exceeding the actual
|
|
# terminal height or width) is stored in $var_height and $var_width
|
|
# (respectively).
|
|
#
|
|
# If the first argument is `-n', the calculated sizes ($var_height and
|
|
# $var_width) are not constrained to minimum/maximum values.
|
|
#
|
|
# Newline character sequences (``\n'') in $prompt are expanded as-is done by
|
|
# Xdialog(1).
|
|
#
|
|
f_xdialog_2inputsbox_size()
|
|
{
|
|
local __constrain=1
|
|
[ "$1" = "-n" ] && __constrain= && shift 1 # -n
|
|
local __var_height="$1" __var_width="$2"
|
|
local __title="$3" __btitle="$4" __prompt="$5"
|
|
local __label1="$6" __init1="$7" __label2="$8" __init2="$9"
|
|
|
|
# Return unless at least one size aspect has been requested
|
|
[ "$__var_height" -o "$__var_width" ] || return $FAILURE
|
|
|
|
# Calculate height/width of inputbox (adjusted/constrained below)
|
|
# NOTE: Function name appended to prevent __var_{height,width} values
|
|
# from becoming local (and thus preventing setvar from working).
|
|
local __height_2ibox_size __width_2ibox_size
|
|
f_dialog_inputbox_size -n \
|
|
"${__var_height:+__height_2ibox_size}" \
|
|
"${__var_width:+__width_2ibox_size}" \
|
|
"$__title" "$__btitle" "$__prompt" "$__hline" "$__init1"
|
|
|
|
# Adjust height if desired
|
|
if [ "$__var_height" ]; then
|
|
# Add height for 1st label, 2nd label, and 2nd input box
|
|
__height_2ibox_size=$(( $__height_2ibox_size + 2 + 2 + 2 ))
|
|
setvar "$__var_height" $__height_2ibox_size
|
|
fi
|
|
|
|
# Adjust width if desired
|
|
if [ "$__var_width" ]; then
|
|
local __n
|
|
|
|
# Bump width for first label text (+16.6% since Xdialog(1))
|
|
__n=$(( ${#__label1} + 7 ))
|
|
__n=$(( $__n + $__n / 6 ))
|
|
[ $__n -gt $__width_2ibox_size ] && __width_2ibox_size=$__n
|
|
|
|
# Bump width for second label text (+16.6% since Xdialog(1))
|
|
__n=$(( ${#__label2} + 7 ))
|
|
__n=$(( $__n + $__n / 6 ))
|
|
[ $__n -gt $__width_2ibox_size ] && __width_2ibox_size=$__n
|
|
|
|
# Bump width for 2nd initial text (something neither dialog(1)
|
|
# nor Xdialog(1) do, but worth it!; +16.6% since Xdialog(1))
|
|
__n=$(( ${#__init2} + 7 ))
|
|
__n=$(( $__n + $__n / 6 ))
|
|
[ $__n -gt $__width_2ibox_size ] && __width_2ibox_size=$__n
|
|
|
|
setvar "$__var_width" $__width_2ibox_size
|
|
fi
|
|
|
|
# Constrain values to sensible minimums/maximums unless `-n' was passed
|
|
# Return success if no-constrain, else return status from constrain
|
|
[ ! "$__constrain" ] ||
|
|
f_dialog_size_constrain "$__var_height" "$__var_width"
|
|
}
|
|
|
|
# f_dialog_menu_size [-n] $var_height $var_width $var_rows \
|
|
# $title $backtitle $prompt $hline \
|
|
# $tag1 $item1 $tag2 $item2 ...
|
|
#
|
|
# Not all versions of dialog(1) perform auto-sizing of the width and height of
|
|
# `--menu' boxes sensibly.
|
|
#
|
|
# This function helps solve this issue by taking three sets of sequential
|
|
# arguments. The first set of arguments are the variable names to use when
|
|
# storing the calculated height, width, and rows. The second set of arguments
|
|
# are the title, backtitle, prompt, and hline. The [optional] third set of
|
|
# arguments are the menu list itself (comprised of tag/item couplets). The
|
|
# optimal height, width, and rows for the described widget (not exceeding the
|
|
# actual terminal height or width) is stored in $var_height, $var_width, and
|
|
# $var_rows (respectively).
|
|
#
|
|
# If the first argument is `-n', the calculated sizes ($var_height, $var_width,
|
|
# and $var_rows) are not constrained to minimum/maximum values.
|
|
#
|
|
f_dialog_menu_size()
|
|
{
|
|
local __constrain=1
|
|
[ "$1" = "-n" ] && __constrain= && shift 1 # -n
|
|
local __var_height="$1" __var_width="$2" __var_rows="$3"
|
|
local __title="$4" __btitle="$5" __prompt="$6" __hline="$7"
|
|
shift 7 # var_height/var_width/var_rows/title/btitle/prompt/hline
|
|
|
|
# Return unless at least one size aspect has been requested
|
|
[ "$__var_height" -o "$__var_width" -o "$__var_rows" ] ||
|
|
return $FAILURE
|
|
|
|
# Calculate height/width of infobox (adjusted/constrained below)
|
|
# NOTE: Function name appended to prevent __var_{height,width} values
|
|
# from becoming local (and thus preventing setvar from working).
|
|
local __height_menu_size __width_menu_size
|
|
f_dialog_infobox_size -n \
|
|
"${__var_height:+__height_menu_size}" \
|
|
"${__var_width:+__width_menu_size}" \
|
|
"$__title" "$__btitle" "$__prompt" "$__hline"
|
|
|
|
#
|
|
# Always process the menu-item arguments to get the longest tag-length,
|
|
# longest item-length (both used to bump the width), and the number of
|
|
# rows (used to bump the height).
|
|
#
|
|
local __longest_tag=0 __longest_item=0 __rows=0
|
|
while [ $# -ge 2 ]; do
|
|
local __tag="$1" __item="$2"
|
|
shift 2 # tag/item
|
|
[ ${#__tag} -gt $__longest_tag ] && __longest_tag=${#__tag}
|
|
[ ${#__item} -gt $__longest_item ] && __longest_item=${#__item}
|
|
__rows=$(( $__rows + 1 ))
|
|
done
|
|
|
|
# Adjust rows early (for up-comning height calculation)
|
|
if [ "$__var_height" -o "$__var_rows" ]; then
|
|
# Add a row for visual aid if using Xdialog(1)
|
|
[ "$USE_XDIALOG" ] && __rows=$(( $__rows + 1 ))
|
|
fi
|
|
|
|
# Adjust height if desired
|
|
if [ "$__var_height" ]; then
|
|
# Add rows to height
|
|
if [ "$USE_XDIALOG" ]; then
|
|
__height_menu_size=$((
|
|
$__height_menu_size + $__rows + 7 ))
|
|
else
|
|
__height_menu_size=$((
|
|
$__height_menu_size + $__rows + 4 ))
|
|
fi
|
|
setvar "$__var_height" $__height_menu_size
|
|
fi
|
|
|
|
# Adjust width if desired
|
|
if [ "$__var_width" ]; then
|
|
# The sum total between the longest tag-length and the
|
|
# longest item-length should be used to bump menu width
|
|
local __n=$(( $__longest_tag + $__longest_item + 10 ))
|
|
[ "$USE_XDIALOG" ] && __n=$(( $__n + $__n / 6 )) # plus 16.6%
|
|
[ $__n -gt $__width_menu_size ] && __width_menu_size=$__n
|
|
|
|
setvar "$__var_width" $__width_menu_size
|
|
fi
|
|
|
|
# Store adjusted rows if desired
|
|
[ "$__var_rows" ] && setvar "$__var_rows" $__rows
|
|
|
|
# Constrain height, width, and rows to sensible minimum/maximum values
|
|
# Return success if no-constrain, else return status from constrain
|
|
[ ! "$__constrain" ] || f_dialog_menu_constrain \
|
|
"$__var_height" "$__var_width" "$__var_rows" "$__prompt"
|
|
}
|
|
|
|
# f_dialog_menu_with_help_size [-n] $var_height $var_width $var_rows \
|
|
# $title $backtitle $prompt $hline \
|
|
# $tag1 $item1 $help1 $tag2 $item2 $help2 ...
|
|
#
|
|
# Not all versions of dialog(1) perform auto-sizing of the width and height of
|
|
# `--menu' boxes sensibly.
|
|
#
|
|
# This function helps solve this issue by taking three sets of sequential
|
|
# arguments. The first set of arguments are the variable names to use when
|
|
# storing the calculated height, width, and rows. The second set of arguments
|
|
# are the title, backtitle, prompt, and hline. The [optional] third set of
|
|
# arguments are the menu list itself (comprised of tag/item/help triplets). The
|
|
# optimal height, width, and rows for the described widget (not exceeding the
|
|
# actual terminal height or width) is stored in $var_height, $var_width, and
|
|
# $var_rows (respectively).
|
|
#
|
|
# If the first argument is `-n', the calculated sizes ($var_height, $var_width,
|
|
# and $var_rows) are not constrained to minimum/maximum values.
|
|
#
|
|
f_dialog_menu_with_help_size()
|
|
{
|
|
local __constrain=1
|
|
[ "$1" = "-n" ] && __constrain= && shift 1 # -n
|
|
local __var_height="$1" __var_width="$2" __var_rows="$3"
|
|
local __title="$4" __btitle="$5" __prompt="$6" __hline="$7"
|
|
shift 7 # var_height/var_width/var_rows/title/btitle/prompt/hline
|
|
|
|
# Return unless at least one size aspect has been requested
|
|
[ "$__var_height" -o "$__var_width" -o "$__var_rows" ] ||
|
|
return $FAILURE
|
|
|
|
# Calculate height/width of infobox (adjusted/constrained below)
|
|
# NOTE: Function name appended to prevent __var_{height,width} values
|
|
# from becoming local (and thus preventing setvar from working).
|
|
local __height_menu_with_help_size __width_menu_with_help_size
|
|
f_dialog_infobox_size -n \
|
|
"${__var_height:+__height_menu_with_help_size}" \
|
|
"${__var_width:+__width_menu_with_help_size}" \
|
|
"$__title" "$__btitle" "$__prompt" "$__hline"
|
|
|
|
#
|
|
# Always process the menu-item arguments to get the longest tag-length,
|
|
# longest item-length, longest help-length (help-length only considered
|
|
# if using Xdialog(1), as it places the help string in the widget) --
|
|
# all used to bump the width -- and the number of rows (used to bump
|
|
# the height).
|
|
#
|
|
local __longest_tag=0 __longest_item=0 __longest_help=0 __rows=0
|
|
while [ $# -ge 3 ]; do
|
|
local __tag="$1" __item="$2" __help="$3"
|
|
shift 3 # tag/item/help
|
|
[ ${#__tag} -gt $__longest_tag ] && __longest_tag=${#__tag}
|
|
[ ${#__item} -gt $__longest_item ] && __longest_item=${#__item}
|
|
[ ${#__help} -gt $__longest_help ] && __longest_help=${#__help}
|
|
__rows=$(( $__rows + 1 ))
|
|
done
|
|
|
|
# Adjust rows early (for up-coming height calculation)
|
|
if [ "$__var_height" -o "$__var_rows" ]; then
|
|
# Add a row for visual aid if using Xdialog(1)
|
|
[ "$USE_XDIALOG" ] && __rows=$(( $__rows + 1 ))
|
|
fi
|
|
|
|
# Adjust height if desired
|
|
if [ "$__var_height" ]; then
|
|
# Add rows to height
|
|
if [ "$USE_XDIALOG" ]; then
|
|
__height_menu_with_help_size=$((
|
|
$__height_menu_with_help_size + $__rows + 8 ))
|
|
else
|
|
__height_menu_with_help_size=$((
|
|
$__height_menu_with_help_size + $__rows + 4 ))
|
|
fi
|
|
setvar "$__var_height" $__height_menu_with_help_size
|
|
fi
|
|
|
|
# Adjust width if desired
|
|
if [ "$__var_width" ]; then
|
|
# The sum total between the longest tag-length and the
|
|
# longest item-length should be used to bump menu width
|
|
local __n=$(( $__longest_tag + $__longest_item + 10 ))
|
|
[ "$USE_XDIALOG" ] && __n=$(( $__n + $__n / 6 )) # plus 16.6%
|
|
[ $__n -gt $__width_menu_with_help_size ] &&
|
|
__width_menu_with_help_size=$__n
|
|
|
|
# Update width for help text if using Xdialog(1)
|
|
if [ "$USE_XDIALOG" ]; then
|
|
__n=$(( $__longest_help + 10 ))
|
|
__n=$(( $__n + $__n / 6 )) # plus 16.6%
|
|
[ $__n -gt $__width_menu_with_help_size ] &&
|
|
__width_menu_with_help_size=$__n
|
|
fi
|
|
|
|
setvar "$__var_width" $__width_menu_with_help_size
|
|
fi
|
|
|
|
# Store adjusted rows if desired
|
|
[ "$__var_rows" ] && setvar "$__var_rows" $__rows
|
|
|
|
# Constrain height, width, and rows to sensible minimum/maximum values
|
|
# Return success if no-constrain, else return status from constrain
|
|
[ ! "$__constrain" ] || f_dialog_menu_constrain \
|
|
"$__var_height" "$__var_width" "$__var_rows" "$__prompt"
|
|
}
|
|
|
|
# f_dialog_radiolist_size [-n] $var_height $var_width $var_rows \
|
|
# $title $backtitle $prompt $hline \
|
|
# $tag1 $item1 $status1 $tag2 $item2 $status2 ...
|
|
#
|
|
# Not all versions of dialog(1) perform auto-sizing of the width and height of
|
|
# `--radiolist' boxes sensibly.
|
|
#
|
|
# This function helps solve this issue by taking three sets of sequential
|
|
# arguments. The first set of arguments are the variable names to use when
|
|
# storing the calculated height, width, and rows. The second set of arguments
|
|
# are the title, backtitle, prompt, and hline. The [optional] third set of
|
|
# arguments are the radio list itself (comprised of tag/item/status triplets).
|
|
# The optimal height, width, and rows for the described widget (not exceeding
|
|
# the actual terminal height or width) is stored in $var_height, $var_width,
|
|
# and $var_rows (respectively).
|
|
#
|
|
# If the first argument is `-n', the calculated sizes ($var_height, $var_width,
|
|
# and $var_rows) are not constrained to minimum/maximum values.
|
|
#
|
|
f_dialog_radiolist_size()
|
|
{
|
|
local __constrain=1
|
|
[ "$1" = "-n" ] && __constrain= && shift 1 # -n
|
|
local __var_height="$1" __var_width="$2" __var_rows="$3"
|
|
local __title="$4" __btitle="$5" __prompt="$6" __hline="$7"
|
|
shift 7 # var_height/var_width/var_rows/title/btitle/prompt/hline
|
|
|
|
# Return unless at least one size aspect has been requested
|
|
[ "$__var_height" -o "$__var_width" -o "$__var_rows" ] ||
|
|
return $FAILURE
|
|
|
|
# Calculate height/width of infobox (adjusted/constrained below)
|
|
# NOTE: Function name appended to prevent __var_{height,width} values
|
|
# from becoming local (and thus preventing setvar from working).
|
|
local __height_rlist_size __width_rlist_size
|
|
f_dialog_infobox_size -n \
|
|
"${__var_height:+__height_rlist_size}" \
|
|
"${__var_width:+__width_rlist_size}" \
|
|
"$__title" "$__btitle" "$__prompt" "$__hline"
|
|
|
|
#
|
|
# Always process the menu-item arguments to get the longest tag-length,
|
|
# longest item-length (both used to bump the width), and the number of
|
|
# rows (used to bump the height).
|
|
#
|
|
local __longest_tag=0 __longest_item=0 __rows_rlist_size=0
|
|
while [ $# -ge 3 ]; do
|
|
local __tag="$1" __item="$2"
|
|
shift 3 # tag/item/status
|
|
[ ${#__tag} -gt $__longest_tag ] && __longest_tag=${#__tag}
|
|
[ ${#__item} -gt $__longest_item ] && __longest_item=${#__item}
|
|
__rows_rlist_size=$(( $__rows_rlist_size + 1 ))
|
|
done
|
|
|
|
# Adjust rows early (for up-coming height calculation)
|
|
if [ "$__var_height" -o "$__var_rows" ]; then
|
|
# Add a row for visual aid if using Xdialog(1)
|
|
[ "$USE_XDIALOG" ] &&
|
|
__rows_rlist_size=$(( $__rows_rlist_size + 1 ))
|
|
fi
|
|
|
|
# Adjust height if desired
|
|
if [ "$__var_height" ]; then
|
|
# Add rows to height
|
|
if [ "$USE_XDIALOG" ]; then
|
|
__height_rlist_size=$((
|
|
$__height_rlist_size + $__rows_rlist_size + 7
|
|
))
|
|
else
|
|
__height_rlist_size=$((
|
|
$__height_rlist_size + $__rows_rlist_size + 4
|
|
))
|
|
fi
|
|
setvar "$__var_height" $__height_rlist_size
|
|
fi
|
|
|
|
# Adjust width if desired
|
|
if [ "$__var_width" ]; then
|
|
# Sum total between longest tag-length, longest item-length,
|
|
# and radio-button width should be used to bump menu width
|
|
local __n=$(( $__longest_tag + $__longest_item + 13 ))
|
|
[ "$USE_XDIALOG" ] && __n=$(( $__n + $__n / 6 )) # plus 16.6%
|
|
[ $__n -gt $__width_rlist_size ] && __width_rlist_size=$__n
|
|
|
|
setvar "$__var_width" $__width_rlist_size
|
|
fi
|
|
|
|
# Store adjusted rows if desired
|
|
[ "$__var_rows" ] && setvar "$__var_rows" $__rows_rlist_size
|
|
|
|
# Constrain height, width, and rows to sensible minimum/maximum values
|
|
# Return success if no-constrain, else return status from constrain
|
|
[ ! "$__constrain" ] || f_dialog_menu_constrain \
|
|
"$__var_height" "$__var_width" "$__var_rows" "$__prompt"
|
|
}
|
|
|
|
# f_dialog_checklist_size [-n] $var_height $var_width $var_rows \
|
|
# $title $backtitle $prompt $hline \
|
|
# $tag1 $item1 $status1 $tag2 $item2 $status2 ...
|
|
#
|
|
# Not all versions of dialog(1) perform auto-sizing of the width and height of
|
|
# `--checklist' boxes sensibly.
|
|
#
|
|
# This function helps solve this issue by taking three sets of sequential
|
|
# arguments. The first set of arguments are the variable names to use when
|
|
# storing the calculated height, width, and rows. The second set of arguments
|
|
# are the title, backtitle, prompt, and hline. The [optional] third set of
|
|
# arguments are the check list itself (comprised of tag/item/status triplets).
|
|
# The optimal height, width, and rows for the described widget (not exceeding
|
|
# the actual terminal height or width) is stored in $var_height, $var_width,
|
|
# and $var_rows (respectively).
|
|
#
|
|
# If the first argument is `-n', the calculated sizes ($var_height, $var_width,
|
|
# and $var_rows) are not constrained to minimum/maximum values.
|
|
#
|
|
f_dialog_checklist_size()
|
|
{
|
|
f_dialog_radiolist_size "$@"
|
|
}
|
|
|
|
# f_dialog_radiolist_with_help_size [-n] $var_height $var_width $var_rows \
|
|
# $title $backtitle $prompt $hline \
|
|
# $tag1 $item1 $status1 $help1 \
|
|
# $tag2 $item2 $status2 $help2 ...
|
|
#
|
|
# Not all versions of dialog(1) perform auto-sizing of the width and height of
|
|
# `--radiolist' boxes sensibly.
|
|
#
|
|
# This function helps solve this issue by taking three sets of sequential
|
|
# arguments. The first set of arguments are the variable names to use when
|
|
# storing the calculated height, width, and rows. The second set of arguments
|
|
# are the title, backtitle, prompt, and hline. The [optional] third set of
|
|
# arguments are the radio list itself (comprised of tag/item/status/help
|
|
# quadruplets). The optimal height, width, and rows for the described widget
|
|
# (not exceeding the actual terminal height or width) is stored in $var_height,
|
|
# $var_width, and $var_rows (respectively).
|
|
#
|
|
# If the first argument is `-n', the calculated sizes ($var_height, $var_width,
|
|
# and $var_rows) are not constrained to minimum/maximum values.
|
|
#
|
|
f_dialog_radiolist_with_help_size()
|
|
{
|
|
local __constrain=1
|
|
[ "$1" = "-n" ] && __constrain= && shift 1 # -n
|
|
local __var_height="$1" __var_width="$2" __var_rows="$3"
|
|
local __title="$4" __btitle="$5" __prompt="$6" __hline="$7"
|
|
shift 7 # var_height/var_width/var_rows/title/btitle/prompt/hline
|
|
|
|
# Return unless at least one size aspect has been requested
|
|
[ "$__var_height" -o "$__var_width" -o "$__var_rows" ] ||
|
|
return $FAILURE
|
|
|
|
# Calculate height/width of infobox (adjusted/constrained below)
|
|
# NOTE: Function name appended to prevent __var_{height,width} values
|
|
# from becoming local (and thus preventing setvar from working).
|
|
local __height_rlist_with_help_size __width_rlist_with_help_size
|
|
f_dialog_infobox_size -n \
|
|
"${__var_height:+__height_rlist_with_help_size}" \
|
|
"${__var_width:+__width_rlist_with_help_size}" \
|
|
"$__title" "$__btitle" "$__prompt" "$__hline"
|
|
|
|
#
|
|
# Always process the menu-item arguments to get the longest tag-length,
|
|
# longest item-length, longest help-length (help-length only considered
|
|
# if using Xdialog(1), as it places the help string in the widget) --
|
|
# all used to bump the width -- and the number of rows (used to bump
|
|
# the height).
|
|
#
|
|
local __longest_tag=0 __longest_item=0 __longest_help=0
|
|
local __rows_rlist_with_help_size=0
|
|
while [ $# -ge 4 ]; do
|
|
local __tag="$1" __item="$2" __status="$3" __help="$4"
|
|
shift 4 # tag/item/status/help
|
|
[ ${#__tag} -gt $__longest_tag ] && __longest_tag=${#__tag}
|
|
[ ${#__item} -gt $__longest_item ] && __longest_item=${#__item}
|
|
[ ${#__help} -gt $__longest_help ] && __longest_help=${#__help}
|
|
__rows_rlist_with_help_size=$((
|
|
$__rows_rlist_with_help_size + 1
|
|
))
|
|
done
|
|
|
|
# Adjust rows early (for up-coming height calculation)
|
|
if [ "$__var_height" -o "$__var_rows" ]; then
|
|
# Add a row for visual aid if using Xdialog(1)
|
|
[ "$USE_XDIALOG" ] &&
|
|
__rows_rlist_with_help_size=$((
|
|
$__rows_rlist_with_help_size + 1
|
|
))
|
|
fi
|
|
|
|
# Adjust height if desired
|
|
if [ "$__var_height" ]; then
|
|
# Add rows to height
|
|
if [ "$USE_XDIALOG" ]; then
|
|
__height_rlist_with_help_size=$((
|
|
$__height_rlist_with_help_size +
|
|
$__rows_rlist_with_help_size + 7
|
|
))
|
|
else
|
|
__height_rlist_with_help_size=$((
|
|
$__height_rlist_with_help_size +
|
|
$__rows_rlist_with_help_size + 4
|
|
))
|
|
fi
|
|
setvar "$__var_height" $__height
|
|
fi
|
|
|
|
# Adjust width if desired
|
|
if [ "$__var_width" ]; then
|
|
# Sum total between longest tag-length, longest item-length,
|
|
# and radio-button width should be used to bump menu width
|
|
local __n=$(( $__longest_tag + $__longest_item + 13 ))
|
|
[ "$USE_XDIALOG" ] && __n=$(( $__n + $__n / 6 )) # plus 16.6%
|
|
[ $__n -gt $__width_rlist_with_help_size ] &&
|
|
__width_rlist_with_help_size=$__n
|
|
|
|
# Update width for help text if using Xdialog(1)
|
|
if [ "$USE_XDIALOG" ]; then
|
|
__n=$(( $__longest_help + 10 ))
|
|
__n=$(( $__n + $__n / 6 )) # plus 16.6%
|
|
[ $__n -gt $__width_rlist_with_help_size ] &&
|
|
__width_rlist_with_help_size=$__n
|
|
fi
|
|
|
|
setvar "$__var_width" $__width_rlist_with_help_size
|
|
fi
|
|
|
|
# Store adjusted rows if desired
|
|
[ "$__var_rows" ] && setvar "$__var_rows" $__rows_rlist_with_help_size
|
|
|
|
# Constrain height, width, and rows to sensible minimum/maximum values
|
|
# Return success if no-constrain, else return status from constrain
|
|
[ ! "$__constrain" ] || f_dialog_menu_constrain \
|
|
"$__var_height" "$__var_width" "$__var_rows" "$__prompt"
|
|
}
|
|
|
|
# f_dialog_checklist_with_help_size [-n] $var_height $var_width $var_rows \
|
|
# $title $backtitle $prompt $hline \
|
|
# $tag1 $item1 $status1 $help1 \
|
|
# $tag2 $item2 $status2 $help2 ...
|
|
#
|
|
# Not all versions of dialog(1) perform auto-sizing of the width and height of
|
|
# `--checklist' boxes sensibly.
|
|
#
|
|
# This function helps solve this issue by taking three sets of sequential
|
|
# arguments. The first set of arguments are the variable names to use when
|
|
# storing the calculated height, width, and rows. The second set of arguments
|
|
# are the title, backtitle, prompt, and hline. The [optional] third set of
|
|
# arguments are the check list itself (comprised of tag/item/status/help
|
|
# quadruplets). The optimal height, width, and rows for the described widget
|
|
# (not exceeding the actual terminal height or width) is stored in $var_height,
|
|
# $var_width, and $var_rows (respectively).
|
|
#
|
|
# If the first argument is `-n', the calculated sizes ($var_height, $var_width,
|
|
# and $var_rows) are not constrained to minimum/maximum values.
|
|
#
|
|
f_dialog_checklist_with_help_size()
|
|
{
|
|
f_dialog_radiolist_with_help_size "$@"
|
|
}
|
|
|
|
# f_dialog_calendar_size [-n] $var_height $var_width \
|
|
# $title $backtitle $prompt [$hline]
|
|
#
|
|
# Not all versions of dialog(1) perform auto-sizing of the width and height of
|
|
# `--calendar' boxes sensibly.
|
|
#
|
|
# This function helps solve this issue by taking two sets of sequential
|
|
# arguments. The first set of arguments are the variable names to use when
|
|
# storing the calculated height and width. The second set of arguments are the
|
|
# title, backtitle, prompt, and [optionally] hline. The optimal height and
|
|
# width for the described widget (not exceeding the actual terminal height or
|
|
# width) is stored in $var_height and $var_width (respectively).
|
|
#
|
|
# If the first argument is `-n', the calculated sizes ($var_height and
|
|
# $var_width) are not constrained to minimum/maximum values.
|
|
#
|
|
# Newline character sequences (``\n'') in $prompt are expanded as-is done by
|
|
# dialog(1).
|
|
#
|
|
f_dialog_calendar_size()
|
|
{
|
|
local __constrain=1
|
|
[ "$1" = "-n" ] && __constrain= && shift 1 # -n
|
|
local __var_height="$1" __var_width="$2"
|
|
local __title="$3" __btitle="$4" __prompt="$5" __hline="$6"
|
|
|
|
# Return unless at least one size aspect has been requested
|
|
[ "$__var_height" -o "$__var_width" ] || return $FAILURE
|
|
|
|
#
|
|
# Obtain/Adjust minimum and maximum thresholds
|
|
# NOTE: Function name appended to prevent __var_{height,width} values
|
|
# from becoming local (and thus preventing setvar from working).
|
|
#
|
|
local __max_height_cal_size __max_width_cal_size
|
|
f_dialog_max_size __max_height_cal_size __max_width_cal_size
|
|
__max_width_cal_size=$(( $__max_width_cal_size - 2 ))
|
|
# the calendar box will refuse to display if too wide
|
|
local __min_width
|
|
if [ "$USE_XDIALOG" ]; then
|
|
__min_width=55
|
|
else
|
|
__min_width=40
|
|
__max_height_cal_size=$((
|
|
$__max_height_cal_size - $DIALOG_CALENDAR_HEIGHT ))
|
|
# When using dialog(1), we can't predict whether the user has
|
|
# disabled shadow's in their `$HOME/.dialogrc' file, so we'll
|
|
# subtract one for the potential shadow around the widget
|
|
__max_height_cal_size=$(( $__max_height_cal_size - 1 ))
|
|
fi
|
|
|
|
# Calculate height if desired
|
|
if [ "$__var_height" ]; then
|
|
local __height
|
|
__height=$( echo "$__prompt" | f_number_of_lines )
|
|
|
|
if [ "$USE_XDIALOG" ]; then
|
|
# Add height to accomodate for embedded calendar widget
|
|
__height=$(( $__height + $DIALOG_CALENDAR_HEIGHT - 1 ))
|
|
|
|
# Also, bump height if backtitle is enabled
|
|
if [ "$__btitle" ]; then
|
|
local __n
|
|
__n=$( echo "$__btitle" | f_number_of_lines )
|
|
__height=$(( $__height + $__n + 2 ))
|
|
fi
|
|
else
|
|
[ "$__prompt" ] && __height=$(( $__height + 1 ))
|
|
fi
|
|
|
|
# Enforce maximum height, unless `-n' was passed
|
|
[ "$__constrain" -a $__height -gt $__max_height_cal_size ] &&
|
|
__height=$__max_height_cal_size
|
|
|
|
setvar "$__var_height" $__height
|
|
fi
|
|
|
|
# Calculate width if desired
|
|
if [ "$__var_width" ]; then
|
|
# NOTE: Function name appended to prevent __var_{height,width}
|
|
# values from becoming local (and thus preventing setvar
|
|
# from working).
|
|
local __width_cal_size
|
|
f_dialog_infobox_size -n "" __width_cal_size \
|
|
"$__title" "$__btitle" "$__prompt" "$__hline"
|
|
|
|
# Enforce minimum/maximum width, unless `-n' was passed
|
|
if [ "$__constrain" ]; then
|
|
if [ $__width_cal_size -lt $__min_width ]; then
|
|
__width_cal_size=$__min_width
|
|
elif [ $__width_cal_size -gt $__max_width_cal_size ]
|
|
then
|
|
__width_cal_size=$__max_width_size
|
|
fi
|
|
fi
|
|
|
|
setvar "$__var_width" $__width_cal_size
|
|
fi
|
|
|
|
return $SUCCESS
|
|
}
|
|
|
|
# f_dialog_timebox_size [-n] $var_height $var_width \
|
|
# $title $backtitle $prompt [$hline]
|
|
#
|
|
# Not all versions of dialog(1) perform auto-sizing of the width and height of
|
|
# `--timebox' boxes sensibly.
|
|
#
|
|
# This function helps solve this issue by taking two sets of sequential
|
|
# arguments. The first set of arguments are the variable names to use when
|
|
# storing the calculated height and width. The second set of arguments are the
|
|
# title, backtitle, prompt, and [optionally] hline. The optional height and
|
|
# width for the described widget (not exceeding the actual terminal height or
|
|
# width) is stored in $var_height and $var_width (respectively).
|
|
#
|
|
# If the first argument is `-n', the calculated sizes ($var_height and
|
|
# $var_width) are not constrained to minimum/maximum values.
|
|
#
|
|
# Newline character sequences (``\n'') in $prompt are expanded as-is done by
|
|
# dialog(1).
|
|
#
|
|
f_dialog_timebox_size()
|
|
{
|
|
local __constrain=1
|
|
[ "$1" = "-n" ] && __constrain= && shift 1 # -n
|
|
local __var_height="$1" __var_width="$2"
|
|
local __title="$3" __btitle="$4" __prompt="$5" __hline="$6"
|
|
|
|
# Return unless at least one size aspect has been requested
|
|
[ "$__var_height" -o "$__var_width" ] || return $FAILURE
|
|
|
|
#
|
|
# Obtain/Adjust minimum and maximum thresholds
|
|
# NOTE: Function name appended to prevent __var_{height,width} values
|
|
# from becoming local (and thus preventing setvar from working).
|
|
#
|
|
local __max_height_tbox_size __max_width_tbox_size
|
|
f_dialog_max_size __max_height_tbox_size __max_width_tbox_size
|
|
__max_width_tbox_size=$(( $__max_width_tbox_size - 2 ))
|
|
# the timebox widget refuses to display if too wide
|
|
local __min_width
|
|
if [ "$USE_XDIALOG" ]; then
|
|
__min_width=40
|
|
else
|
|
__min_width=20
|
|
__max_height_tbox_size=$(( \
|
|
$__max_height_tbox_size - $DIALOG_TIMEBOX_HEIGHT ))
|
|
# When using dialog(1), we can't predict whether the user has
|
|
# disabled shadow's in their `$HOME/.dialogrc' file, so we'll
|
|
# subtract one for the potential shadow around the widget
|
|
__max_height_tbox_size=$(( $__max_height_tbox_size - 1 ))
|
|
fi
|
|
|
|
# Calculate height if desired
|
|
if [ "$__var_height" -a "$USE_XDIALOG" ]; then
|
|
# When using Xdialog(1), the height seems to have
|
|
# no effect. All values provide the same results.
|
|
setvar "$__var_height" 0 # autosize
|
|
elif [ "$__var_height" ]; then
|
|
local __height
|
|
__height=$( echo "$__prompt" | f_number_of_lines )
|
|
__height=$(( $__height ${__prompt:++1} + 1 ))
|
|
|
|
# Enforce maximum height, unless `-n' was passed
|
|
[ "$__constrain" -a $__height -gt $__max_height_tbox_size ] &&
|
|
__height=$__max_height_tbox_size
|
|
|
|
setvar "$__var_height" $__height
|
|
fi
|
|
|
|
# Calculate width if desired
|
|
if [ "$__var_width" ]; then
|
|
# NOTE: Function name appended to prevent __var_{height,width}
|
|
# values from becoming local (and thus preventing setvar
|
|
# from working).
|
|
local __width_tbox_size
|
|
f_dialog_infobox_size -n "" __width_tbox_size \
|
|
"$__title" "$__btitle" "$__prompt" "$__hline"
|
|
|
|
# Enforce the minimum width for displaying the timebox
|
|
if [ "$__constrain" ]; then
|
|
if [ $__width_tbox_size -lt $__min_width ]; then
|
|
__width_tbox_size=$__min_width
|
|
elif [ $__width_tbox_size -ge $__max_width_tbox_size ]
|
|
then
|
|
__width_tbox_size=$__max_width_tbox_size
|
|
fi
|
|
fi
|
|
|
|
setvar "$__var_width" $__width_tbox_size
|
|
fi
|
|
|
|
return $SUCCESS
|
|
}
|
|
|
|
############################################################ CLEAR FUNCTIONS
|
|
|
|
# f_dialog_clear
|
|
#
|
|
# Clears any/all previous dialog(1) displays.
|
|
#
|
|
f_dialog_clear()
|
|
{
|
|
$DIALOG --clear
|
|
}
|
|
|
|
############################################################ INFO FUNCTIONS
|
|
|
|
# f_dialog_info $info_text ...
|
|
#
|
|
# Throw up a dialog(1) infobox. The infobox remains until another dialog is
|
|
# displayed or `dialog --clear' (or f_dialog_clear) is called.
|
|
#
|
|
f_dialog_info()
|
|
{
|
|
local info_text="$*" height width
|
|
f_dialog_infobox_size height width \
|
|
"$DIALOG_TITLE" "$DIALOG_BACKTITLE" "$info_text"
|
|
$DIALOG \
|
|
--title "$DIALOG_TITLE" \
|
|
--backtitle "$DIALOG_BACKTITLE" \
|
|
${USE_XDIALOG:+--ignore-eof} \
|
|
${USE_XDIALOG:+--no-buttons} \
|
|
--infobox "$info_text" $height $width
|
|
}
|
|
|
|
# f_xdialog_info $info_text ...
|
|
#
|
|
# Throw up an Xdialog(1) infobox and do not dismiss it until stdin produces
|
|
# EOF. This implies that you must execute this either as an rvalue to a pipe,
|
|
# lvalue to indirection or in a sub-shell that provides data on stdin.
|
|
#
|
|
f_xdialog_info()
|
|
{
|
|
local info_text="$*" height width
|
|
f_dialog_infobox_size height width \
|
|
"$DIALOG_TITLE" "$DIALOG_BACKTITLE" "$info_text"
|
|
$DIALOG \
|
|
--title "$DIALOG_TITLE" \
|
|
--backtitle "$DIALOG_BACKTITLE" \
|
|
--no-close --no-buttons \
|
|
--infobox "$info_text" $height $width \
|
|
-1 # timeout of -1 means abort when EOF on stdin
|
|
}
|
|
|
|
############################################################ MSGBOX FUNCTIONS
|
|
|
|
# f_dialog_msgbox $msg_text [$hline]
|
|
#
|
|
# Throw up a dialog(1) msgbox. The msgbox remains until the user presses ENTER
|
|
# or ESC, acknowledging the modal dialog.
|
|
#
|
|
# If the user presses ENTER, the exit status is zero (success), otherwise if
|
|
# the user presses ESC the exit status is 255.
|
|
#
|
|
f_dialog_msgbox()
|
|
{
|
|
local msg_text="$1" hline="$2" height width
|
|
f_dialog_buttonbox_size height width \
|
|
"$DIALOG_TITLE" "$DIALOG_BACKTITLE" "$msg_text" "$hline"
|
|
$DIALOG \
|
|
--title "$DIALOG_TITLE" \
|
|
--backtitle "$DIALOG_BACKTITLE" \
|
|
--hline "$hline" \
|
|
--ok-label "$msg_ok" \
|
|
--msgbox "$msg_text" $height $width
|
|
}
|
|
|
|
############################################################ TEXTBOX FUNCTIONS
|
|
|
|
# f_dialog_textbox $file
|
|
#
|
|
# Display the contents of $file (or an error if $file does not exist, etc.) in
|
|
# a dialog(1) textbox (which has a scrollable region for the text). The textbox
|
|
# remains until the user presses ENTER or ESC, acknowledging the modal dialog.
|
|
#
|
|
# If the user presses ENTER, the exit status is zero (success), otherwise if
|
|
# the user presses ESC the exit status is 255.
|
|
#
|
|
f_dialog_textbox()
|
|
{
|
|
local file="$1"
|
|
local contents height width retval
|
|
|
|
contents=$( cat "$file" 2>&1 )
|
|
retval=$?
|
|
|
|
f_dialog_buttonbox_size height width \
|
|
"$DIALOG_TITLE" "$DIALOG_BACKTITLE" "$contents"
|
|
|
|
if [ $retval -eq $SUCCESS ]; then
|
|
$DIALOG \
|
|
--title "$DIALOG_TITLE" \
|
|
--backtitle "$DIALOG_BACKTITLE" \
|
|
--exit-label "$msg_ok" \
|
|
--no-cancel \
|
|
--textbox "$file" $height $width
|
|
else
|
|
$DIALOG \
|
|
--title "$DIALOG_TITLE" \
|
|
--backtitle "$DIALOG_BACKTITLE" \
|
|
--ok-label "$msg_ok" \
|
|
--msgbox "$contents" $height $width
|
|
fi
|
|
}
|
|
|
|
############################################################ YESNO FUNCTIONS
|
|
|
|
# f_dialog_yesno $msg_text [$hline]
|
|
#
|
|
# Display a dialog(1) Yes/No prompt to allow the user to make some decision.
|
|
# The yesno prompt remains until the user presses ENTER or ESC, acknowledging
|
|
# the modal dialog.
|
|
#
|
|
# If the user chooses YES the exit status is zero, or chooses NO the exit
|
|
# status is one, or presses ESC the exit status is 255.
|
|
#
|
|
f_dialog_yesno()
|
|
{
|
|
local msg_text="$1" height width
|
|
local hline="${2-$hline_arrows_tab_enter}"
|
|
|
|
f_interactive || return 0 # If non-interactive, return YES all the time
|
|
|
|
f_dialog_buttonbox_size height width \
|
|
"$DIALOG_TITLE" "$DIALOG_BACKTITLE" "$msg_text" "$hline"
|
|
|
|
if [ "$USE_XDIALOG" ]; then
|
|
$DIALOG \
|
|
--title "$DIALOG_TITLE" \
|
|
--backtitle "$DIALOG_BACKTITLE" \
|
|
--hline "$hline" \
|
|
--ok-label "$msg_yes" \
|
|
--cancel-label "$msg_no" \
|
|
--yesno "$msg_text" $height $width
|
|
else
|
|
$DIALOG \
|
|
--title "$DIALOG_TITLE" \
|
|
--backtitle "$DIALOG_BACKTITLE" \
|
|
--hline "$hline" \
|
|
--yes-label "$msg_yes" \
|
|
--no-label "$msg_no" \
|
|
--yesno "$msg_text" $height $width
|
|
fi
|
|
}
|
|
|
|
# f_dialog_noyes $msg_text [$hline]
|
|
#
|
|
# Display a dialog(1) No/Yes prompt to allow the user to make some decision.
|
|
# The noyes prompt remains until the user presses ENTER or ESC, acknowledging
|
|
# the modal dialog.
|
|
#
|
|
# If the user chooses YES the exit status is zero, or chooses NO the exit
|
|
# status is one, or presses ESC the exit status is 255.
|
|
#
|
|
# NOTE: This is just like the f_dialog_yesno function except "No" is default.
|
|
#
|
|
f_dialog_noyes()
|
|
{
|
|
local msg_text="$1" height width
|
|
local hline="${2-$hline_arrows_tab_enter}"
|
|
|
|
f_interactive || return 1 # If non-interactive, return NO all the time
|
|
|
|
f_dialog_buttonbox_size height width \
|
|
"$DIALOG_TITLE" "$DIALOG_BACKTITLE" "$msg_text" "$hline"
|
|
|
|
if [ "$USE_XDIALOG" ]; then
|
|
$DIALOG \
|
|
--title "$DIALOG_TITLE" \
|
|
--backtitle "$DIALOG_BACKTITLE" \
|
|
--hline "$hline" \
|
|
--default-no \
|
|
--ok-label "$msg_yes" \
|
|
--cancel-label "$msg_no" \
|
|
--yesno "$msg_text" $height $width
|
|
else
|
|
$DIALOG \
|
|
--title "$DIALOG_TITLE" \
|
|
--backtitle "$DIALOG_BACKTITLE" \
|
|
--hline "$hline" \
|
|
--defaultno \
|
|
--yes-label "$msg_yes" \
|
|
--no-label "$msg_no" \
|
|
--yesno "$msg_text" $height $width
|
|
fi
|
|
}
|
|
|
|
############################################################ INPUT FUNCTIONS
|
|
|
|
# f_dialog_inputstr_store [-s] $text
|
|
#
|
|
# Store some text from a dialog(1) inputbox to be retrieved later by
|
|
# f_dialog_inputstr_fetch(). If the first argument is `-s', the text is
|
|
# sanitized before being stored.
|
|
#
|
|
f_dialog_inputstr_store()
|
|
{
|
|
local sanitize=
|
|
[ "$1" = "-s" ] && sanitize=1 && shift 1 # -s
|
|
local text="$1"
|
|
|
|
# Sanitize the line before storing it if desired
|
|
[ "$sanitize" ] && f_dialog_line_sanitize text
|
|
|
|
setvar DIALOG_INPUTBOX_$$ "$text"
|
|
}
|
|
|
|
# f_dialog_inputstr_fetch [$var_to_set]
|
|
#
|
|
# Obtain the inputstr entered by the user from the most recently displayed
|
|
# dialog(1) inputbox (previously stored with f_dialog_inputstr_store() above).
|
|
# If $var_to_set is NULL or missing, output is printed to stdout (which is less
|
|
# recommended due to performance degradation; in a loop for example).
|
|
#
|
|
f_dialog_inputstr_fetch()
|
|
{
|
|
local __var_to_set="$1" __cp
|
|
|
|
debug= f_getvar DIALOG_INPUTBOX_$$ "${__var_to_set:-__cp}" # get data
|
|
setvar DIALOG_INPUTBOX_$$ "" # scrub memory in case data was sensitive
|
|
|
|
# Return the line on standard-out if desired
|
|
[ "$__var_to_set" ] || echo "$__cp"
|
|
|
|
return $SUCCESS
|
|
}
|
|
|
|
# f_dialog_input $var_to_set $prompt [$init [$hline]]
|
|
#
|
|
# Prompt the user with a dialog(1) inputbox to enter some value. The inputbox
|
|
# remains until the the user presses ENTER or ESC, or otherwise ends the
|
|
# editing session (by selecting `Cancel' for example).
|
|
#
|
|
# If the user presses ENTER, the exit status is zero (success), otherwise if
|
|
# the user presses ESC the exit status is 255, or if the user chose Cancel, the
|
|
# exit status is instead 1.
|
|
#
|
|
# NOTE: The hline should correspond to the type of data you want from the user.
|
|
# NOTE: Should not be used to edit multiline values.
|
|
#
|
|
f_dialog_input()
|
|
{
|
|
local __var_to_set="$1" __prompt="$2" __init="$3" __hline="$4"
|
|
|
|
# NOTE: Function name appended to prevent __var_{height,width} values
|
|
# from becoming local (and thus preventing setvar from working).
|
|
local __height_input __width_input
|
|
f_dialog_inputbox_size __height_input __width_input \
|
|
"$DIALOG_TITLE" "$DIALOG_BACKTITLE" \
|
|
"$__prompt" "$__init" "$__hline"
|
|
|
|
local __opterm="--"
|
|
[ "$USE_XDIALOG" ] && __opterm=
|
|
|
|
local __dialog_input
|
|
__dialog_input=$(
|
|
$DIALOG \
|
|
--title "$DIALOG_TITLE" \
|
|
--backtitle "$DIALOG_BACKTITLE" \
|
|
--hline "$__hline" \
|
|
--ok-label "$msg_ok" \
|
|
--cancel-label "$msg_cancel" \
|
|
--inputbox "$__prompt" \
|
|
$__height_input $__width_input \
|
|
$__opterm "$__init" \
|
|
2>&1 >&$DIALOG_TERMINAL_PASSTHRU_FD
|
|
)
|
|
local __retval=$?
|
|
|
|
# Remove warnings and leading/trailing whitespace from user input
|
|
f_dialog_line_sanitize __dialog_input
|
|
|
|
setvar "$__var_to_set" "$__dialog_input"
|
|
return $__retval
|
|
}
|
|
|
|
############################################################ MENU FUNCTIONS
|
|
|
|
# f_dialog_menutag_store [-s] $text
|
|
#
|
|
# Store some text from a dialog(1) menu to be retrieved later by
|
|
# f_dialog_menutag_fetch(). If the first argument is `-s', the text is
|
|
# sanitized before being stored.
|
|
#
|
|
f_dialog_menutag_store()
|
|
{
|
|
local sanitize=
|
|
[ "$1" = "-s" ] && sanitize=1 && shift 1 # -s
|
|
local text="$1"
|
|
|
|
# Sanitize the menutag before storing it if desired
|
|
[ "$sanitize" ] && f_dialog_data_sanitize text
|
|
|
|
setvar DIALOG_MENU_$$ "$text"
|
|
}
|
|
|
|
# f_dialog_menutag_fetch [$var_to_set]
|
|
#
|
|
# Obtain the menutag chosen by the user from the most recently displayed
|
|
# dialog(1) menu (previously stored with f_dialog_menutag_store() above). If
|
|
# $var_to_set is NULL or missing, output is printed to stdout (which is less
|
|
# recommended due to performance degradation; in a loop for example).
|
|
#
|
|
f_dialog_menutag_fetch()
|
|
{
|
|
local __var_to_set="$1" __cp
|
|
|
|
debug= f_getvar DIALOG_MENU_$$ "${__var_to_set:-__cp}" # get the data
|
|
setvar DIALOG_MENU_$$ "" # scrub memory in case data was sensitive
|
|
|
|
# Return the data on standard-out if desired
|
|
[ "$__var_to_set" ] || echo "$__cp"
|
|
|
|
return $SUCCESS
|
|
}
|
|
|
|
# f_dialog_menuitem_store [-s] $text
|
|
#
|
|
# Store the item from a dialog(1) menu (see f_dialog_menutag2item()) to be
|
|
# retrieved later by f_dialog_menuitem_fetch(). If the first argument is `-s',
|
|
# the text is sanitized before being stored.
|
|
#
|
|
f_dialog_menuitem_store()
|
|
{
|
|
local sanitize=
|
|
[ "$1" = "-s" ] && sanitize=1 && shift 1 # -s
|
|
local text="$1"
|
|
|
|
# Sanitize the menuitem before storing it if desired
|
|
[ "$sanitize" ] && f_dialog_data_sanitize text
|
|
|
|
setvar DIALOG_MENUITEM_$$ "$text"
|
|
}
|
|
|
|
# f_dialog_menuitem_fetch [$var_to_set]
|
|
#
|
|
# Obtain the menuitem chosen by the user from the most recently displayed
|
|
# dialog(1) menu (previously stored with f_dialog_menuitem_store() above). If
|
|
# $var_to_set is NULL or missing, output is printed to stdout (which is less
|
|
# recommended due to performance degradation; in a loop for example).
|
|
#
|
|
f_dialog_menuitem_fetch()
|
|
{
|
|
local __var_to_set="$1" __cp
|
|
|
|
debug= f_getvar DIALOG_MENUITEM_$$ "${__var_to_set:-__cp}" # get data
|
|
setvar DIALOG_MENUITEM_$$ "" # scrub memory in case data was sensitive
|
|
|
|
# Return the data on standard-out if desired
|
|
[ "$__var_to_set" ] || echo "$__cp"
|
|
|
|
return $SUCCESS
|
|
}
|
|
|
|
# f_dialog_default_store [-s] $text
|
|
#
|
|
# Store some text to be used later as the --default-item argument to dialog(1)
|
|
# (or Xdialog(1)) for --menu, --checklist, and --radiolist widgets. Retrieve
|
|
# the text later with f_dialog_menutag_fetch(). If the first argument is `-s',
|
|
# the text is sanitized before being stored.
|
|
#
|
|
f_dialog_default_store()
|
|
{
|
|
local sanitize=
|
|
[ "$1" = "-s" ] && sanitize=1 && shift 1 # -s
|
|
local text="$1"
|
|
|
|
# Sanitize the defaulitem before storing it if desired
|
|
[ "$sanitize" ] && f_dialog_data_sanitize text
|
|
|
|
setvar DEFAULTITEM_$$ "$text"
|
|
}
|
|
|
|
# f_dialog_default_fetch [$var_to_set]
|
|
#
|
|
# Obtain text to be used with the --default-item argument of dialog(1) (or
|
|
# Xdialog(1)) (previously stored with f_dialog_default_store() above). If
|
|
# $var_to_set is NULL or missing, output is printed to stdout (which is less
|
|
# recommended due to performance degradation; in a loop for example).
|
|
#
|
|
f_dialog_default_fetch()
|
|
{
|
|
local __var_to_set="$1" __cp
|
|
|
|
debug= f_getvar DEFAULTITEM_$$ "${__var_to_set:-__cp}" # get the data
|
|
setvar DEFAULTITEM_$$ "" # scrub memory in case data was sensitive
|
|
|
|
# Return the data on standard-out if desired
|
|
[ "$__var_to_set" ] || echo "$__cp"
|
|
|
|
return $SUCCESS
|
|
}
|
|
|
|
# f_dialog_menutag2item $tag_chosen $tag1 $item1 $tag2 $item2 ...
|
|
#
|
|
# To use the `--menu' option of dialog(1) you must pass an ordered list of
|
|
# tag/item pairs on the command-line. When the user selects a menu option the
|
|
# tag for that item is printed to stderr.
|
|
#
|
|
# This function allows you to dereference the tag chosen by the user back into
|
|
# the item associated with said tag.
|
|
#
|
|
# Pass the tag chosen by the user as the first argument, followed by the
|
|
# ordered list of tag/item pairs (HINT: use the same tag/item list as was
|
|
# passed to dialog(1) for consistency).
|
|
#
|
|
# If the tag cannot be found, NULL is returned.
|
|
#
|
|
f_dialog_menutag2item()
|
|
{
|
|
local tag="$1" tagn item
|
|
shift 1 # tag
|
|
|
|
while [ $# -gt 0 ]; do
|
|
tagn="$1"
|
|
item="$2"
|
|
shift 2 # tagn/item
|
|
|
|
if [ "$tag" = "$tagn" ]; then
|
|
echo "$item"
|
|
return $SUCCESS
|
|
fi
|
|
done
|
|
return $FAILURE
|
|
}
|
|
|
|
# f_dialog_menutag2item_with_help $tag_chosen $tag1 $item1 $help1 \
|
|
# $tag2 $item2 $help2 ...
|
|
#
|
|
# To use the `--menu' option of dialog(1) with the `--item-help' option, you
|
|
# must pass an ordered list of tag/item/help triplets on the command-line. When
|
|
# the user selects a menu option the tag for that item is printed to stderr.
|
|
#
|
|
# This function allows you to dereference the tag chosen by the user back into
|
|
# the item associated with said tag (help is discarded/ignored).
|
|
#
|
|
# Pass the tag chosen by the user as the first argument, followed by the
|
|
# ordered list of tag/item/help triplets (HINT: use the same tag/item/help list
|
|
# as was passed to dialog(1) for consistency).
|
|
#
|
|
# If the tag cannot be found, NULL is returned.
|
|
#
|
|
f_dialog_menutag2item_with_help()
|
|
{
|
|
local tag="$1" tagn item
|
|
shift 1 # tag
|
|
|
|
while [ $# -gt 0 ]; do
|
|
tagn="$1"
|
|
item="$2"
|
|
shift 3 # tagn/item/help
|
|
|
|
if [ "$tag" = "$tagn" ]; then
|
|
echo "$item"
|
|
return $SUCCESS
|
|
fi
|
|
done
|
|
return $FAILURE
|
|
}
|
|
|
|
# f_dialog_menutag2index $tag_chosen $tag1 $item1 $tag2 $item2 ...
|
|
#
|
|
# To use the `--menu' option of dialog(1) you must pass an ordered list of
|
|
# tag/item pairs on the command-line. When the user selects a menu option the
|
|
# tag for that item is printed to stderr.
|
|
#
|
|
# This function allows you to dereference the tag chosen by the user back into
|
|
# the index associated with said tag. The index is the one-based tag/item pair
|
|
# array position within the ordered list of tag/item pairs passed to dialog(1).
|
|
#
|
|
# Pass the tag chosen by the user as the first argument, followed by the
|
|
# ordered list of tag/item pairs (HINT: use the same tag/item list as was
|
|
# passed to dialog(1) for consistency).
|
|
#
|
|
# If the tag cannot be found, NULL is returned.
|
|
#
|
|
f_dialog_menutag2index()
|
|
{
|
|
local tag="$1" tagn n=1
|
|
shift 1 # tag
|
|
|
|
while [ $# -gt 0 ]; do
|
|
tagn="$1"
|
|
shift 2 # tagn/item
|
|
|
|
if [ "$tag" = "$tagn" ]; then
|
|
echo $n
|
|
return $SUCCESS
|
|
fi
|
|
n=$(( $n + 1 ))
|
|
done
|
|
return $FAILURE
|
|
}
|
|
|
|
# f_dialog_menutag2index_with_help $tag_chosen $tag1 $item1 $help1 \
|
|
# $tag2 $item2 $help2 ...
|
|
#
|
|
# To use the `--menu' option of dialog(1) with the `--item-help' option, you
|
|
# must pass an ordered list of tag/item/help triplets on the command-line. When
|
|
# the user selects a menu option the tag for that item is printed to stderr.
|
|
#
|
|
# This function allows you to dereference the tag chosen by the user back into
|
|
# the index associated with said tag. The index is the one-based tag/item/help
|
|
# triplet array position within the ordered list of tag/item/help triplets
|
|
# passed to dialog(1).
|
|
#
|
|
# Pass the tag chosen by the user as the first argument, followed by the
|
|
# ordered list of tag/item/help triplets (HINT: use the same tag/item/help list
|
|
# as was passed to dialog(1) for consistency).
|
|
#
|
|
# If the tag cannot be found, NULL is returned.
|
|
#
|
|
f_dialog_menutag2index_with_help()
|
|
{
|
|
local tag="$1" tagn n=1
|
|
shift 1 # tag
|
|
|
|
while [ $# -gt 0 ]; do
|
|
tagn="$1"
|
|
shift 3 # tagn/item/help
|
|
|
|
if [ "$tag" = "$tagn" ]; then
|
|
echo $n
|
|
return $SUCCESS
|
|
fi
|
|
n=$(( $n + 1 ))
|
|
done
|
|
return $FAILURE
|
|
}
|
|
|
|
############################################################ INIT FUNCTIONS
|
|
|
|
# f_dialog_init
|
|
#
|
|
# Initialize (or re-initialize) the dialog module after setting/changing any
|
|
# of the following environment variables:
|
|
#
|
|
# USE_XDIALOG Either NULL or Non-NULL. If given a value will indicate
|
|
# that Xdialog(1) should be used instead of dialog(1).
|
|
#
|
|
# SECURE Either NULL or Non-NULL. If given a value will indicate
|
|
# that (while running as root) sudo(8) authentication is
|
|
# required to proceed.
|
|
#
|
|
# Also reads ~/.dialogrc for the following information:
|
|
#
|
|
# NO_SHADOW Either NULL or Non-NULL. If use_shadow is OFF (case-
|
|
# insensitive) in ~/.dialogrc this is set to "1" (otherwise
|
|
# unset).
|
|
#
|
|
f_dialog_init()
|
|
{
|
|
local funcname=f_dialog_init
|
|
|
|
DIALOG_SELF_INITIALIZE=
|
|
USE_DIALOG=1
|
|
|
|
#
|
|
# Clone terminal stdout so we can redirect to it from within sub-shells
|
|
#
|
|
eval exec $DIALOG_TERMINAL_PASSTHRU_FD\>\&1
|
|
|
|
#
|
|
# Add `-S' and `-X' to the list of standard arguments supported by all
|
|
#
|
|
case "$GETOPTS_STDARGS" in
|
|
*SX*) : good ;; # already present
|
|
*) GETOPTS_STDARGS="${GETOPTS_STDARGS}SX"
|
|
esac
|
|
|
|
#
|
|
# Process stored command-line arguments
|
|
#
|
|
f_dprintf "f_dialog_init: ARGV=[%s] GETOPTS_STDARGS=[%s]" \
|
|
"$ARGV" "$GETOPTS_STDARGS"
|
|
SECURE=$( set -- $ARGV
|
|
while getopts \
|
|
"$GETOPTS_STDARGS$GETOPTS_EXTRA$GETOPTS_ALLFLAGS" \
|
|
flag > /dev/null; do
|
|
case "$flag" in
|
|
S) echo 1 ;;
|
|
esac
|
|
done
|
|
)
|
|
USE_XDIALOG=$( set -- $ARGV
|
|
while getopts \
|
|
"$GETOPTS_STDARGS$GETOPTS_EXTRA$GETOPTS_ALLFLAGS" \
|
|
flag > /dev/null; do
|
|
case "$flag" in
|
|
S|X) echo 1 ;;
|
|
esac
|
|
done
|
|
)
|
|
f_dprintf "f_dialog_init: SECURE=[%s] USE_XDIALOG=[%s]" \
|
|
"$SECURE" "$USE_XDIALOG"
|
|
|
|
#
|
|
# Process `-X' command-line option
|
|
#
|
|
[ "$USE_XDIALOG" ] && DIALOG=Xdialog USE_DIALOG=
|
|
|
|
#
|
|
# Sanity check, or die gracefully
|
|
#
|
|
if ! f_have $DIALOG; then
|
|
unset USE_XDIALOG
|
|
local failed_dialog="$DIALOG"
|
|
DIALOG=dialog
|
|
f_die 1 "$msg_no_such_file_or_directory" "$pgm" "$failed_dialog"
|
|
fi
|
|
|
|
#
|
|
# Read ~/.dialogrc (unless using Xdialog(1)) for properties
|
|
#
|
|
if [ -f ~/.dialogrc -a ! "$USE_XDIALOG" ]; then
|
|
eval "$(
|
|
awk -v param=use_shadow -v expect=OFF \
|
|
-v set="NO_SHADOW=1" '
|
|
!/^[[:space:]]*(#|$)/ && \
|
|
tolower($1) ~ "^"param"(=|$)" && \
|
|
/[^#]*=/ {
|
|
sub(/^[^=]*=[[:space:]]*/, "")
|
|
if ( toupper($1) == expect ) print set";"
|
|
}' ~/.dialogrc
|
|
)"
|
|
fi
|
|
|
|
#
|
|
# If we're already running as root but we got there by way of sudo(8)
|
|
# and we have X11, we should merge the xauth(1) credentials from our
|
|
# original user.
|
|
#
|
|
if [ "$USE_XDIALOG" ] &&
|
|
[ "$( id -u )" = "0" ] &&
|
|
[ "$SUDO_USER" -a "$DISPLAY" ]
|
|
then
|
|
if ! f_have xauth; then
|
|
# Die gracefully, as we [likely] can't use Xdialog(1)
|
|
unset USE_XDIALOG
|
|
DIALOG=dialog
|
|
f_die 1 "$msg_no_such_file_or_directory" "$pgm" "xauth"
|
|
fi
|
|
HOSTNAME=$( hostname )
|
|
local displaynum="${DISPLAY#*:}"
|
|
eval xauth -if \~$SUDO_USER/.Xauthority extract - \
|
|
\"\$HOSTNAME/unix:\$displaynum\" \
|
|
\"\$HOSTNAME:\$displaynum\" | sudo sh -c 'xauth -ivf \
|
|
~root/.Xauthority merge - > /dev/null 2>&1'
|
|
fi
|
|
|
|
#
|
|
# Probe Xdialog(1) for maximum height/width constraints, or die
|
|
# gracefully
|
|
#
|
|
if [ "$USE_XDIALOG" ]; then
|
|
local maxsize
|
|
if ! f_eval_catch -dk maxsize $funcname "$DIALOG" \
|
|
'LANG= LC_ALL= %s --print-maxsize' "$DIALOG"
|
|
then
|
|
# Xdialog(1) failed, fall back to dialog(1)
|
|
unset USE_XDIALOG
|
|
|
|
# Display the error message produced by Xdialog(1)
|
|
local height width
|
|
f_dialog_buttonbox_size height width \
|
|
"$DIALOG_TITLE" "$DIALOG_BACKTITLE" "$maxsize"
|
|
dialog \
|
|
--title "$DIALOG_TITLE" \
|
|
--backtitle "$DIALOG_BACKTITLE" \
|
|
--ok-label "$msg_ok" \
|
|
--msgbox "$maxsize" $height $width
|
|
exit $FAILURE
|
|
fi
|
|
|
|
XDIALOG_MAXSIZE=$(
|
|
set -- ${maxsize##*:}
|
|
|
|
height=${1%,}
|
|
width=$2
|
|
|
|
echo $height $width
|
|
)
|
|
fi
|
|
|
|
#
|
|
# If using Xdialog(1), swap DIALOG_TITLE with DIALOG_BACKTITLE.
|
|
# The reason for this is because many dialog(1) applications use
|
|
# --backtitle for the program name (which is better suited as
|
|
# --title with Xdialog(1)).
|
|
#
|
|
if [ "$USE_XDIALOG" ]; then
|
|
local _DIALOG_TITLE="$DIALOG_TITLE"
|
|
DIALOG_TITLE="$DIALOG_BACKTITLE"
|
|
DIALOG_BACKTITLE="$_DIALOG_TITLE"
|
|
fi
|
|
|
|
f_dprintf "f_dialog_init: dialog(1) API initialized."
|
|
}
|
|
|
|
############################################################ MAIN
|
|
|
|
#
|
|
# Self-initialize unless requested otherwise
|
|
#
|
|
f_dprintf "%s: DIALOG_SELF_INITIALIZE=[%s]" \
|
|
dialog.subr "$DIALOG_SELF_INITIALIZE"
|
|
case "$DIALOG_SELF_INITIALIZE" in
|
|
""|0|[Nn][Oo]|[Oo][Ff][Ff]|[Ff][Aa][Ll][Ss][Ee]) : do nothing ;;
|
|
*) f_dialog_init
|
|
esac
|
|
|
|
f_dprintf "%s: Successfully loaded." dialog.subr
|
|
|
|
fi # ! $_DIALOG_SUBR
|