1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-17 10:26:15 +00:00
freebsd/usr.sbin/mfiutil/mfi_volume.c
Scott Long 763fae7918 ntroduce mfiutil, a basic utility for managing LSI SAS-RAID & Dell PERC5/6
controllers.  Controller, array, and drive status can be checked, basic
attributes can be changed, and arrays and spares can be created and deleted.
Controller firmware can also be flashed.

This does not replace MegaCLI, found in ports, as that is officially sanctioned
and supported by LSI and includes vastly more functionality.  However, mfiutil
is open source and guaranteed to provide basic functionality, which can be
especially useful if you have a problem and can't get MegaCLI to work.

Approved by:    re
Obtained from:  Yahoo! Inc.
2009-08-13 23:18:45 +00:00

413 lines
11 KiB
C

/*-
* Copyright (c) 2008, 2009 Yahoo!, Inc.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The names of the authors may not be used to endorse or promote
* products derived from this software without specific prior written
* permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
#include <sys/types.h>
#include <sys/errno.h>
#include <err.h>
#include <libutil.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include "mfiutil.h"
MFI_TABLE(top, volume);
const char *
mfi_ldstate(enum mfi_ld_state state)
{
static char buf[16];
switch (state) {
case MFI_LD_STATE_OFFLINE:
return ("OFFLINE");
case MFI_LD_STATE_PARTIALLY_DEGRADED:
return ("PARTIALLY DEGRADED");
case MFI_LD_STATE_DEGRADED:
return ("DEGRADED");
case MFI_LD_STATE_OPTIMAL:
return ("OPTIMAL");
default:
sprintf(buf, "LSTATE 0x%02x", state);
return (buf);
}
}
void
mbox_store_ldref(uint8_t *mbox, union mfi_ld_ref *ref)
{
mbox[0] = ref->v.target_id;
mbox[1] = ref->v.reserved;
mbox[2] = ref->v.seq & 0xff;
mbox[3] = ref->v.seq >> 8;
}
int
mfi_ld_get_list(int fd, struct mfi_ld_list *list, uint8_t *statusp)
{
return (mfi_dcmd_command(fd, MFI_DCMD_LD_GET_LIST, list,
sizeof(struct mfi_ld_list), NULL, 0, statusp));
}
int
mfi_ld_get_info(int fd, uint8_t target_id, struct mfi_ld_info *info,
uint8_t *statusp)
{
uint8_t mbox[1];
mbox[0] = target_id;
return (mfi_dcmd_command(fd, MFI_DCMD_LD_GET_INFO, info,
sizeof(struct mfi_ld_info), mbox, 1, statusp));
}
static int
mfi_ld_get_props(int fd, uint8_t target_id, struct mfi_ld_props *props)
{
uint8_t mbox[1];
mbox[0] = target_id;
return (mfi_dcmd_command(fd, MFI_DCMD_LD_GET_PROP, props,
sizeof(struct mfi_ld_props), mbox, 1, NULL));
}
static int
mfi_ld_set_props(int fd, struct mfi_ld_props *props)
{
uint8_t mbox[4];
mbox_store_ldref(mbox, &props->ld);
return (mfi_dcmd_command(fd, MFI_DCMD_LD_SET_PROP, props,
sizeof(struct mfi_ld_props), mbox, 4, NULL));
}
static int
update_cache_policy(int fd, struct mfi_ld_props *props, uint8_t new_policy,
uint8_t mask)
{
uint8_t changes, policy;
policy = (props->default_cache_policy & ~mask) | new_policy;
if (policy == props->default_cache_policy)
return (0);
changes = policy ^ props->default_cache_policy;
if (changes & MR_LD_CACHE_ALLOW_WRITE_CACHE)
printf("%s caching of I/O writes\n",
policy & MR_LD_CACHE_ALLOW_WRITE_CACHE ? "Enabling" :
"Disabling");
if (changes & MR_LD_CACHE_ALLOW_READ_CACHE)
printf("%s caching of I/O reads\n",
policy & MR_LD_CACHE_ALLOW_READ_CACHE ? "Enabling" :
"Disabling");
if (changes & MR_LD_CACHE_WRITE_BACK)
printf("Setting write cache policy to %s\n",
policy & MR_LD_CACHE_WRITE_BACK ? "write-back" :
"write-through");
if (changes & (MR_LD_CACHE_READ_AHEAD | MR_LD_CACHE_READ_ADAPTIVE))
printf("Setting read ahead policy to %s\n",
policy & MR_LD_CACHE_READ_AHEAD ?
(policy & MR_LD_CACHE_READ_ADAPTIVE ?
"adaptive" : "always") : "none");
props->default_cache_policy = policy;
if (mfi_ld_set_props(fd, props) < 0) {
warn("Failed to set volume properties");
return (errno);
}
return (0);
}
static int
volume_cache(int ac, char **av)
{
struct mfi_ld_props props;
int error, fd;
uint8_t target_id, policy;
if (ac < 2) {
warnx("cache: volume required");
return (EINVAL);
}
fd = mfi_open(mfi_unit);
if (fd < 0) {
warn("mfi_open");
return (errno);
}
if (mfi_lookup_volume(fd, av[1], &target_id) < 0) {
warn("Invalid volume: %s", av[1]);
return (errno);
}
if (mfi_ld_get_props(fd, target_id, &props) < 0) {
warn("Failed to fetch volume properties");
return (errno);
}
if (ac == 2) {
printf("mfi%u volume %s cache settings:\n", mfi_unit,
mfi_volume_name(fd, target_id));
printf(" I/O caching: ");
switch (props.default_cache_policy &
(MR_LD_CACHE_ALLOW_WRITE_CACHE |
MR_LD_CACHE_ALLOW_READ_CACHE)) {
case 0:
printf("disabled\n");
break;
case MR_LD_CACHE_ALLOW_WRITE_CACHE:
printf("writes\n");
break;
case MR_LD_CACHE_ALLOW_READ_CACHE:
printf("reads\n");
break;
case MR_LD_CACHE_ALLOW_WRITE_CACHE |
MR_LD_CACHE_ALLOW_READ_CACHE:
printf("writes and reads\n");
break;
}
printf(" write caching: %s\n",
props.default_cache_policy & MR_LD_CACHE_WRITE_BACK ?
"write-back" : "write-through");
printf(" read ahead: %s\n",
props.default_cache_policy & MR_LD_CACHE_READ_AHEAD ?
(props.default_cache_policy & MR_LD_CACHE_READ_ADAPTIVE ?
"adaptive" : "always") : "none");
printf("drive write cache: ");
switch (props.disk_cache_policy) {
case MR_PD_CACHE_UNCHANGED:
printf("default\n");
break;
case MR_PD_CACHE_ENABLE:
printf("enabled\n");
break;
case MR_PD_CACHE_DISABLE:
printf("disabled\n");
break;
default:
printf("??? %d\n", props.disk_cache_policy);
break;
}
if (props.default_cache_policy != props.current_cache_policy)
printf("Cache Disabled Due to Dead Battery\n");
error = 0;
} else {
if (strcmp(av[2], "all") == 0 || strcmp(av[2], "enable") == 0)
error = update_cache_policy(fd, &props,
MR_LD_CACHE_ALLOW_READ_CACHE |
MR_LD_CACHE_ALLOW_WRITE_CACHE,
MR_LD_CACHE_ALLOW_READ_CACHE |
MR_LD_CACHE_ALLOW_WRITE_CACHE);
else if (strcmp(av[2], "none") == 0 ||
strcmp(av[2], "disable") == 0)
error = update_cache_policy(fd, &props, 0,
MR_LD_CACHE_ALLOW_READ_CACHE |
MR_LD_CACHE_ALLOW_WRITE_CACHE);
else if (strcmp(av[2], "reads") == 0)
error = update_cache_policy(fd, &props,
MR_LD_CACHE_ALLOW_READ_CACHE,
MR_LD_CACHE_ALLOW_READ_CACHE |
MR_LD_CACHE_ALLOW_WRITE_CACHE);
else if (strcmp(av[2], "writes") == 0)
error = update_cache_policy(fd, &props,
MR_LD_CACHE_ALLOW_WRITE_CACHE,
MR_LD_CACHE_ALLOW_READ_CACHE |
MR_LD_CACHE_ALLOW_WRITE_CACHE);
else if (strcmp(av[2], "write-back") == 0)
error = update_cache_policy(fd, &props,
MR_LD_CACHE_WRITE_BACK,
MR_LD_CACHE_WRITE_BACK);
else if (strcmp(av[2], "write-through") == 0)
error = update_cache_policy(fd, &props, 0,
MR_LD_CACHE_WRITE_BACK);
else if (strcmp(av[2], "read-ahead") == 0) {
if (ac < 4) {
warnx("cache: read-ahead setting required");
return (EINVAL);
}
if (strcmp(av[3], "none") == 0)
policy = 0;
else if (strcmp(av[3], "always") == 0)
policy = MR_LD_CACHE_READ_AHEAD;
else if (strcmp(av[3], "adaptive") == 0)
policy = MR_LD_CACHE_READ_AHEAD |
MR_LD_CACHE_READ_ADAPTIVE;
else {
warnx("cache: invalid read-ahead setting");
return (EINVAL);
}
error = update_cache_policy(fd, &props, policy,
MR_LD_CACHE_READ_AHEAD |
MR_LD_CACHE_READ_ADAPTIVE);
} else if (strcmp(av[2], "write-cache") == 0) {
if (ac < 4) {
warnx("cache: write-cache setting required");
return (EINVAL);
}
if (strcmp(av[3], "enable") == 0)
policy = MR_PD_CACHE_ENABLE;
else if (strcmp(av[3], "disable") == 0)
policy = MR_PD_CACHE_DISABLE;
else if (strcmp(av[3], "default") == 0)
policy = MR_PD_CACHE_UNCHANGED;
else {
warnx("cache: invalid write-cache setting");
return (EINVAL);
}
error = 0;
if (policy != props.disk_cache_policy) {
switch (policy) {
case MR_PD_CACHE_ENABLE:
printf("Enabling write-cache on physical drives\n");
break;
case MR_PD_CACHE_DISABLE:
printf("Disabling write-cache on physical drives\n");
break;
case MR_PD_CACHE_UNCHANGED:
printf("Using default write-cache setting on physical drives\n");
break;
}
props.disk_cache_policy = policy;
if (mfi_ld_set_props(fd, &props) < 0) {
warn("Failed to set volume properties");
error = errno;
}
}
} else {
warnx("cache: Invalid command");
return (EINVAL);
}
}
close(fd);
return (error);
}
MFI_COMMAND(top, cache, volume_cache);
static int
volume_name(int ac, char **av)
{
struct mfi_ld_props props;
int fd;
uint8_t target_id;
if (ac != 3) {
warnx("name: volume and name required");
return (EINVAL);
}
if (strlen(av[2]) >= sizeof(props.name)) {
warnx("name: new name is too long");
return (ENOSPC);
}
fd = mfi_open(mfi_unit);
if (fd < 0) {
warn("mfi_open");
return (errno);
}
if (mfi_lookup_volume(fd, av[1], &target_id) < 0) {
warn("Invalid volume: %s", av[1]);
return (errno);
}
if (mfi_ld_get_props(fd, target_id, &props) < 0) {
warn("Failed to fetch volume properties");
return (errno);
}
printf("mfi%u volume %s name changed from \"%s\" to \"%s\"\n", mfi_unit,
mfi_volume_name(fd, target_id), props.name, av[2]);
bzero(props.name, sizeof(props.name));
strcpy(props.name, av[2]);
if (mfi_ld_set_props(fd, &props) < 0) {
warn("Failed to set volume properties");
return (errno);
}
close(fd);
return (0);
}
MFI_COMMAND(top, name, volume_name);
static int
volume_progress(int ac, char **av)
{
struct mfi_ld_info info;
int fd;
uint8_t target_id;
if (ac != 2) {
warnx("volume progress: %s", ac > 2 ? "extra arguments" :
"volume required");
return (EINVAL);
}
fd = mfi_open(mfi_unit);
if (fd < 0) {
warn("mfi_open");
return (errno);
}
if (mfi_lookup_volume(fd, av[1], &target_id) < 0) {
warn("Invalid volume: %s", av[1]);
return (errno);
}
/* Get the info for this drive. */
if (mfi_ld_get_info(fd, target_id, &info, NULL) < 0) {
warn("Failed to fetch info for volume %s",
mfi_volume_name(fd, target_id));
return (errno);
}
/* Display any of the active events. */
if (info.progress.active & MFI_LD_PROGRESS_CC)
mfi_display_progress("Consistency Check", &info.progress.cc);
if (info.progress.active & MFI_LD_PROGRESS_BGI)
mfi_display_progress("Background Init", &info.progress.bgi);
if (info.progress.active & MFI_LD_PROGRESS_FGI)
mfi_display_progress("Foreground Init", &info.progress.fgi);
if (info.progress.active & MFI_LD_PROGRESS_RECON)
mfi_display_progress("Reconstruction", &info.progress.recon);
if ((info.progress.active & (MFI_LD_PROGRESS_CC | MFI_LD_PROGRESS_BGI |
MFI_LD_PROGRESS_FGI | MFI_LD_PROGRESS_RECON)) == 0)
printf("No activity in progress for volume %s.\n",
mfi_volume_name(fd, target_id));
close(fd);
return (0);
}
MFI_COMMAND(volume, progress, volume_progress);