mirror/freebsd
1
0
Fork 0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-18 10:35:55 +00:00
Code Issues Releases Activity
aaad27fdfe
freebsd/sys/dev/aic7xxx/aic7xxx_pci.c
Justin T. Gibbs dd1290f033 aic7xxx.c: 
Filter incoming transfer negotiation requests to ensure they
	never exceed the settings specified by the user.

	In restart sequencer attempt to deal with a bug in the aic7895.
	If a third party reset occurs at just the right time, the
	stack register can lock up.  When restarting the sequencer
	after handling the SCSI reset, poke SEQADDR1 before resting
	the sequencers program counter.

	When something strange happens, dump the card's transaction
	state via ahc_dump_card_state().  This should aid in debugging.

	Handle request sense transactions via the QINFIFO instead of
	attaching them to the waiting queue directly.  The waiting
	queue consumes card SCB resources and, in the pathological case
	of every target on the bus beating our selection attemps and
	issuing a check condition, could have caused us to run out
	of SCBs.  I have never seen this happen, and only early
	cards with 3 or 4 SCBs had any real chance of ever getting
	into this state.

	Add additional sequencer interrupt codes to support firmware
	diagnostics.  The diagnostic code is enabled with the
	AHC_DEBUG_SEQUENCER kernel option.

	Make it possible to switch into and out of target mode on
	the fly.  The card comes up by default as an initiator but
	will switch into target mode as soon as an enable lun operation
	is performed.  As always, target mode behavior is gated
	by the AHC_TMODE_ENABLE kernel option so most users will
	not be affected by this change.

	In ahc_update_target_msg_request(), also issue a new
	request if the ppr_options have changed.

	Never issue a PPR as a target.  It is forbidden by the spec.

	Correct a bug in ahc_parse_msg() that prevented us from
	responding to PPR messages as a target.

	Mark SCBs that are on the untagged queue with a flag instead
	of checking several fields in the SCB to see if the SCB should
	be on the queue.  This makes it easier for things like automatic
	request sense requests to be queued without touching the
	untagged queues even though they are untagged requests.

	When dealing with ignore wide residue messages that occur
	in the middle of a transfer, reset HADDR, not SHADDR for
	non-ultra2 chips.  Although SHADDR is where the firmware
	fetches the ending transfer address for a save data pointers
	request, it is readonly. Setting HADDR has the side effect
	of also updating SHADDR.

	Cleanup the output of ahc_dump_card_state() by nulling out the
	free scb list in the non-paging case.  The free list is only
	used if we must page SCBs.

	Correct the transmission of cdbs > 12 bytes in length.  When
	swapping HSCBs prior to notifing the sequencer of the new
	transaction, the bus address pointer for the cdb must also
	be recalculated to reflect its new location.  We now defer
	the calculation of the cdb address until just before queing
	it to the card.

	When pulling transfer negotiation settings out of scratch
	ram, convert 5MHz/clock doubled settings to 10MHz.

	Add a new function ahc_qinfifo_requeue_tail() for use by
	error recovery actions and auto-request sense operations.
	These operations always occur when the sequencer is paused,
	so we can avoid the extra expense incurred in the normal
	SCB queue method.

	Use the BMOV instruction for all single byte moves on
	controllers that support it.  The bmov instruction is
	twice as fast as an AND with an immediate of 0xFF as
	is used on older controllers.

	Correct a few bugs in ahc_dump_card_state().  If we have
	hardware assisted queue registers, use them to get the
	sequencer's idea of the head of the queue.  When enumerating
	the untagged queue, it helps to use the correct index for
	the queue.

aic7xxx.h:

	Indicate via a feature flag, which controllers can take
	on both the target and the initiator role at the same time.

	Add the AHC_SEQUENCER_DEBUG flag.

	Add the SCB_CDB32_PTR flag used for dealing with cdbs
	with lengths between 13 and 32 bytes.

	Add new prototypes.

aic7xxx.reg:
	Allow the SCSIBUSL register to be written to.  This is
	required to fix a selection timeout problem on the 7892/99.

	Cleanup the sequencer interrupt codes so that all debugging
	codes are grouped at the end of the list.

	Correct the definition of the ULTRA_ENB and DISC_DSB locations
	in scratch ram.  This prevented the driver from properly honoring
	these settings when no serial eeprom was available.

	Remove an unused sequencer flag.

aic7xxx.seq:
	Just before a potential select-out, clear the SCSIBUSL
	register.  Occasionally, during a selection timeout, the
	contents of the register may be presented on the bus,
	causing much confusion.

	Add sequencer diagnostic code to detect software and or
	hardware bugs.  The code attempts to verify most list
	operations so any corruption is caught before it occurs.
	We also track information about why a particular reconnection
	request was rejected.

	Don't clobber the digital REQ/ACK filter setting in SXFRCTL0
	when clearing the channel.

	Fix a target mode bug that would cause us to return busy
	status instead of queue full in respnse to a tagged transaction.

	Cleanup the overrun case.  It turns out that by simply
	butting the chip in bitbucket mode, it will ack any
	bytes until the phase changes.  This drasticaly simplifies
	things.

	Prior to leaving the data phase, make sure that the S/G
	preload queue is empty.

	Remove code to place a request sense request on the waiting
	queue.  This is all handled by the kernel now.

	Change the semantics of "findSCB".  In the past, findSCB
	ensured that a freshly paged in SCB appeared on the disconnected
	list.  The problem with this is that there is no guarantee that
	the paged in SCB is for a disconnected transation.  We now
	defer any list manipulation to the caller who usually discards
	the SCB via the free list.

	Inline some busy target table operations.

	Add a critical section to protect adding an SCB to
	the disconnected list.

aic7xxx_freebsd.c:
	Handle changes in the transfer negotiation setting API
	to filter incoming requests.  No filtering is necessary
	for "goal" requests from the XPT.

	Set the SCB_CDB32_PTR flag when queing a transaction with
	a large cdb.

	In ahc_timeout, only take action if the active SCB is
	the timedout SCB.  This deals with the case of two
	transactions to the same device with different timeout
	values.

	Use ahc_qinfifo_requeu_tail() instead of home grown
	version.

aic7xxx_inline.h:
	Honor SCB_CDB32_PTR when queuing a new request.

aic7xxx_pci.c:
	Use the maximum data fifo threshold for all chips.
2000-10-31 18:43:29 +00:00

1924 lines
48 KiB
C
Raw Blame History

/*
* Product specific probe and attach routines for:
* 3940, 2940, aic7895, aic7890, aic7880,
* aic7870, aic7860 and aic7850 SCSI controllers
*
* Copyright (c) 1995, 1996, 1997, 1998, 1999, 2000 Justin T. Gibbs
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification, immediately at the beginning of the file.
* 2. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU Public License ("GPL").
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $Id: //depot/src/aic7xxx/aic7xxx_pci.c#5 $
*
* $FreeBSD$
*/
#ifdef __linux__
#include "aic7xxx_linux.h"
#include "aic7xxx_inline.h"
#include "aic7xxx_93cx6.h"
#endif
#ifdef __FreeBSD__
#include <dev/aic7xxx/aic7xxx_freebsd.h>
#include <dev/aic7xxx/aic7xxx_inline.h>
#include <dev/aic7xxx/aic7xxx_93cx6.h>
#endif
#define AHC_PCI_IOADDR PCIR_MAPS /* I/O Address */
#define AHC_PCI_MEMADDR (PCIR_MAPS + 4) /* Mem I/O Address */
static __inline uint64_t
ahc_compose_id(u_int device, u_int vendor, u_int subdevice, u_int subvendor)
{
uint64_t id;
id = subvendor
| (subdevice << 16)
| ((uint64_t)vendor << 32)
| ((uint64_t)device << 48);
return (id);
}
#define ID_ALL_MASK 0xFFFFFFFFFFFFFFFFull
#define ID_DEV_VENDOR_MASK 0xFFFFFFFF00000000ull
#define ID_AIC7850 0x5078900400000000ull
#define ID_AHA_2910_15_20_30C 0x5078900478509004ull
#define ID_AIC7855 0x5578900400000000ull
#define ID_AIC7859 0x3860900400000000ull
#define ID_AHA_2930CU 0x3860900438699004ull
#define ID_AIC7860 0x6078900400000000ull
#define ID_AIC7860C 0x6078900478609004ull
#define ID_AHA_1480A 0x6075900400000000ull
#define ID_AHA_2940AU_0 0x6178900400000000ull
#define ID_AHA_2940AU_1 0x6178900478619004ull
#define ID_AHA_2940AU_CN 0x2178900478219004ull
#define ID_AHA_2930C_VAR 0x6038900438689004ull
#define ID_AIC7870 0x7078900400000000ull
#define ID_AHA_2940 0x7178900400000000ull
#define ID_AHA_3940 0x7278900400000000ull
#define ID_AHA_398X 0x7378900400000000ull
#define ID_AHA_2944 0x7478900400000000ull
#define ID_AHA_3944 0x7578900400000000ull
#define ID_AHA_4944 0x7678900400000000ull
#define ID_AIC7880 0x8078900400000000ull
#define ID_AIC7880_B 0x8078900478809004ull
#define ID_AHA_2940U 0x8178900400000000ull
#define ID_AHA_3940U 0x8278900400000000ull
#define ID_AHA_2944U 0x8478900400000000ull
#define ID_AHA_3944U 0x8578900400000000ull
#define ID_AHA_398XU 0x8378900400000000ull
#define ID_AHA_4944U 0x8678900400000000ull
#define ID_AHA_2940UB 0x8178900478819004ull
#define ID_AHA_2930U 0x8878900478889004ull
#define ID_AHA_2940U_PRO 0x8778900478879004ull
#define ID_AHA_2940U_CN 0x0078900478009004ull
#define ID_AIC7895 0x7895900478959004ull
#define ID_AIC7895_RAID_PORT 0x7893900478939004ull
#define ID_AHA_2940U_DUAL 0x7895900478919004ull
#define ID_AHA_3940AU 0x7895900478929004ull
#define ID_AHA_3944AU 0x7895900478949004ull
#define ID_AIC7890 0x001F9005000F9005ull
#define ID_AAA_131U2 0x0013900500039005ull
#define ID_AHA_2930U2 0x0011900501819005ull
#define ID_AHA_2940U2B 0x00109005A1009005ull
#define ID_AHA_2940U2_OEM 0x0010900521809005ull
#define ID_AHA_2940U2 0x00109005A1809005ull
#define ID_AHA_2950U2B 0x00109005E1009005ull
#define ID_AIC7892 0x008F9005FFFF9005ull
#define ID_AHA_29160 0x00809005E2A09005ull
#define ID_AHA_29160_CPQ 0x00809005E2A00E11ull
#define ID_AHA_29160N 0x0080900562A09005ull
#define ID_AHA_29160B 0x00809005E2209005ull
#define ID_AHA_19160B 0x0081900562A19005ull
#define ID_AIC7896 0x005F9005FFFF9005ull
#define ID_AHA_3950U2B_0 0x00509005FFFF9005ull
#define ID_AHA_3950U2B_1 0x00509005F5009005ull
#define ID_AHA_3950U2D_0 0x00519005FFFF9005ull
#define ID_AHA_3950U2D_1 0x00519005B5009005ull
#define ID_AIC7899 0x00CF9005FFFF9005ull
#define ID_AHA_3960D 0x00C09005F6209005ull /* AKA AHA-39160 */
#define ID_AHA_3960D_CPQ 0x00C09005F6200E11ull
#define ID_AIC7810 0x1078900400000000ull
#define ID_AIC7815 0x7815900400000000ull
static ahc_device_setup_t ahc_aic7850_setup;
static ahc_device_setup_t ahc_aic7855_setup;
static ahc_device_setup_t ahc_aic7860_setup;
static ahc_device_setup_t ahc_aic7870_setup;
static ahc_device_setup_t ahc_aha394X_setup;
static ahc_device_setup_t ahc_aha494X_setup;
static ahc_device_setup_t ahc_aha398X_setup;
static ahc_device_setup_t ahc_aic7880_setup;
static ahc_device_setup_t ahc_2940Pro_setup;
static ahc_device_setup_t ahc_aha394XU_setup;
static ahc_device_setup_t ahc_aha398XU_setup;
static ahc_device_setup_t ahc_aic7890_setup;
static ahc_device_setup_t ahc_aic7892_setup;
static ahc_device_setup_t ahc_aic7895_setup;
static ahc_device_setup_t ahc_aic7896_setup;
static ahc_device_setup_t ahc_aic7899_setup;
static ahc_device_setup_t ahc_raid_setup;
static ahc_device_setup_t ahc_aha394XX_setup;
static ahc_device_setup_t ahc_aha494XX_setup;
static ahc_device_setup_t ahc_aha398XX_setup;
struct ahc_pci_identity ahc_pci_ident_table [] =
{
/* aic7850 based controllers */
{
ID_AHA_2910_15_20_30C,
ID_ALL_MASK,
"Adaptec 2910/15/20/30C SCSI adapter",
ahc_aic7850_setup
},
/* aic7860 based controllers */
{
ID_AHA_2930CU,
ID_ALL_MASK,
"Adaptec 2930CU SCSI adapter",
ahc_aic7860_setup
},
{
ID_AHA_1480A & ID_DEV_VENDOR_MASK,
ID_DEV_VENDOR_MASK,
"Adaptec 1480A Ultra SCSI adapter",
ahc_aic7860_setup
},
{
ID_AHA_2940AU_0 & ID_DEV_VENDOR_MASK,
ID_DEV_VENDOR_MASK,
"Adaptec 2940A Ultra SCSI adapter",
ahc_aic7860_setup
},
{
ID_AHA_2940AU_CN & ID_DEV_VENDOR_MASK,
ID_DEV_VENDOR_MASK,
"Adaptec 2940A/CN Ultra SCSI adapter",
ahc_aic7860_setup
},
{
ID_AHA_2930C_VAR & ID_DEV_VENDOR_MASK,
ID_DEV_VENDOR_MASK,
"Adaptec 2930C SCSI adapter (VAR)",
ahc_aic7860_setup
},
/* aic7870 based controllers */
{
ID_AHA_2940,
ID_ALL_MASK,
"Adaptec 2940 SCSI adapter",
ahc_aic7870_setup
},
{
ID_AHA_3940,
ID_ALL_MASK,
"Adaptec 3940 SCSI adapter",
ahc_aha394X_setup
},
{
ID_AHA_398X,
ID_ALL_MASK,
"Adaptec 398X SCSI RAID adapter",
ahc_aha398X_setup
},
{
ID_AHA_2944,
ID_ALL_MASK,
"Adaptec 2944 SCSI adapter",
ahc_aic7870_setup
},
{
ID_AHA_3944,
ID_ALL_MASK,
"Adaptec 3944 SCSI adapter",
ahc_aha394X_setup
},
{
ID_AHA_4944,
ID_ALL_MASK,
"Adaptec 4944 SCSI adapter",
ahc_aha494X_setup
},
/* aic7880 based controllers */
{
ID_AHA_2940U & ID_DEV_VENDOR_MASK,
ID_DEV_VENDOR_MASK,
"Adaptec 2940 Ultra SCSI adapter",
ahc_aic7880_setup
},
{
ID_AHA_3940U & ID_DEV_VENDOR_MASK,
ID_DEV_VENDOR_MASK,
"Adaptec 3940 Ultra SCSI adapter",
ahc_aha394XU_setup
},
{
ID_AHA_2944U & ID_DEV_VENDOR_MASK,
ID_DEV_VENDOR_MASK,
"Adaptec 2944 Ultra SCSI adapter",
ahc_aic7880_setup
},
{
ID_AHA_3944U & ID_DEV_VENDOR_MASK,
ID_DEV_VENDOR_MASK,
"Adaptec 3944 Ultra SCSI adapter",
ahc_aha394XU_setup
},
{
ID_AHA_398XU & ID_DEV_VENDOR_MASK,
ID_DEV_VENDOR_MASK,
"Adaptec 398X Ultra SCSI RAID adapter",
ahc_aha398XU_setup
},
{
/*
* XXX Don't know the slot numbers
* so we can't identify channels
*/
ID_AHA_4944U & ID_DEV_VENDOR_MASK,
ID_DEV_VENDOR_MASK,
"Adaptec 4944 Ultra SCSI adapter",
ahc_aic7880_setup
},
{
ID_AHA_2930U & ID_DEV_VENDOR_MASK,
ID_DEV_VENDOR_MASK,
"Adaptec 2930 Ultra SCSI adapter",
ahc_aic7880_setup
},
{
ID_AHA_2940U_PRO & ID_DEV_VENDOR_MASK,
ID_DEV_VENDOR_MASK,
"Adaptec 2940 Pro Ultra SCSI adapter",
ahc_2940Pro_setup
},
{
ID_AHA_2940U_CN & ID_DEV_VENDOR_MASK,
ID_DEV_VENDOR_MASK,
"Adaptec 2940/CN Ultra SCSI adapter",
ahc_aic7880_setup
},
/* aic7890 based controllers */
{
ID_AHA_2930U2,
ID_ALL_MASK,
"Adaptec 2930 Ultra2 SCSI adapter",
ahc_aic7890_setup
},
{
ID_AHA_2940U2B,
ID_ALL_MASK,
"Adaptec 2940B Ultra2 SCSI adapter",
ahc_aic7890_setup
},
{
ID_AHA_2940U2_OEM,
ID_ALL_MASK,
"Adaptec 2940 Ultra2 SCSI adapter (OEM)",
ahc_aic7890_setup
},
{
ID_AHA_2940U2,
ID_ALL_MASK,
"Adaptec 2940 Ultra2 SCSI adapter",
ahc_aic7890_setup
},
{
ID_AHA_2950U2B,
ID_ALL_MASK,
"Adaptec 2950 Ultra2 SCSI adapter",
ahc_aic7890_setup
},
{
ID_AAA_131U2,
ID_ALL_MASK,
"Adaptec AAA-131 Ultra2 RAID adapter",
ahc_aic7890_setup
},
/* aic7892 based controllers */
{
ID_AHA_29160,
ID_ALL_MASK,
"Adaptec 29160 Ultra160 SCSI adapter",
ahc_aic7892_setup
},
{
ID_AHA_29160_CPQ,
ID_ALL_MASK,
"Adaptec (Compaq OEM) 29160 Ultra160 SCSI adapter",
ahc_aic7892_setup
},
{
ID_AHA_29160N,
ID_ALL_MASK,
"Adaptec 29160N Ultra160 SCSI adapter",
ahc_aic7892_setup
},
{
ID_AHA_29160B,
ID_ALL_MASK,
"Adaptec 29160B Ultra160 SCSI adapter",
ahc_aic7892_setup
},
{
ID_AHA_19160B,
ID_ALL_MASK,
"Adaptec 19160B Ultra160 SCSI adapter",
ahc_aic7892_setup
},
/* aic7895 based controllers */
{
ID_AHA_2940U_DUAL,
ID_ALL_MASK,
"Adaptec 2940/DUAL Ultra SCSI adapter",
ahc_aic7895_setup
},
{
ID_AHA_3940AU,
ID_ALL_MASK,
"Adaptec 3940A Ultra SCSI adapter",
ahc_aic7895_setup
},
{
ID_AHA_3944AU,
ID_ALL_MASK,
"Adaptec 3944A Ultra SCSI adapter",
ahc_aic7895_setup
},
/* aic7896/97 based controllers */
{
ID_AHA_3950U2B_0,
ID_ALL_MASK,
"Adaptec 3950B Ultra2 SCSI adapter",
ahc_aic7896_setup
},
{
ID_AHA_3950U2B_1,
ID_ALL_MASK,
"Adaptec 3950B Ultra2 SCSI adapter",
ahc_aic7896_setup
},
{
ID_AHA_3950U2D_0,
ID_ALL_MASK,
"Adaptec 3950D Ultra2 SCSI adapter",
ahc_aic7896_setup
},
{
ID_AHA_3950U2D_1,
ID_ALL_MASK,
"Adaptec 3950D Ultra2 SCSI adapter",
ahc_aic7896_setup
},
/* aic7899 based controllers */
{
ID_AHA_3960D,
ID_ALL_MASK,
"Adaptec 3960D Ultra160 SCSI adapter",
ahc_aic7899_setup
},
{
ID_AHA_3960D_CPQ,
ID_ALL_MASK,
"Adaptec (Compaq OEM) 3960D Ultra160 SCSI adapter",
ahc_aic7899_setup
},
/* Generic chip probes for devices we don't know 'exactly' */
{
ID_AIC7850 & ID_DEV_VENDOR_MASK,
ID_DEV_VENDOR_MASK,
"Adaptec aic7850 SCSI adapter",
ahc_aic7850_setup
},
{
ID_AIC7855 & ID_DEV_VENDOR_MASK,
ID_DEV_VENDOR_MASK,
"Adaptec aic7855 SCSI adapter",
ahc_aic7855_setup
},
{
ID_AIC7859 & ID_DEV_VENDOR_MASK,
ID_DEV_VENDOR_MASK,
"Adaptec aic7859 Ultra SCSI adapter",
ahc_aic7860_setup
},
{
ID_AIC7860 & ID_DEV_VENDOR_MASK,
ID_DEV_VENDOR_MASK,
"Adaptec aic7860 SCSI adapter",
ahc_aic7860_setup
},
{
ID_AIC7870 & ID_DEV_VENDOR_MASK,
ID_DEV_VENDOR_MASK,
"Adaptec aic7870 SCSI adapter",
ahc_aic7870_setup
},
{
ID_AIC7880 & ID_DEV_VENDOR_MASK,
ID_DEV_VENDOR_MASK,
"Adaptec aic7880 Ultra SCSI adapter",
ahc_aic7880_setup
},
{
ID_AIC7890 & ID_DEV_VENDOR_MASK,
ID_DEV_VENDOR_MASK,
"Adaptec aic7890/91 Ultra2 SCSI adapter",
ahc_aic7890_setup
},
{
ID_AIC7892 & ID_DEV_VENDOR_MASK,
ID_DEV_VENDOR_MASK,
"Adaptec aic7892 Ultra160 SCSI adapter",
ahc_aic7892_setup
},
{
ID_AIC7895 & ID_DEV_VENDOR_MASK,
ID_DEV_VENDOR_MASK,
"Adaptec aic7895 Ultra SCSI adapter",
ahc_aic7895_setup
},
{
ID_AIC7895_RAID_PORT & ID_DEV_VENDOR_MASK,
ID_DEV_VENDOR_MASK,
"Adaptec aic7895 Ultra SCSI adapter (RAID PORT)",
ahc_aic7895_setup
},
{
ID_AIC7896 & ID_DEV_VENDOR_MASK,
ID_DEV_VENDOR_MASK,
"Adaptec aic7896/97 Ultra2 SCSI adapter",
ahc_aic7896_setup
},
{
ID_AIC7899 & ID_DEV_VENDOR_MASK,
ID_DEV_VENDOR_MASK,
"Adaptec aic7899 Ultra160 SCSI adapter",
ahc_aic7899_setup
},
{
ID_AIC7810 & ID_DEV_VENDOR_MASK,
ID_DEV_VENDOR_MASK,
"Adaptec aic7810 RAID memory controller",
ahc_raid_setup
},
{
ID_AIC7815 & ID_DEV_VENDOR_MASK,
ID_DEV_VENDOR_MASK,
"Adaptec aic7815 RAID memory controller",
ahc_raid_setup
}
};
const int ahc_num_pci_devs = NUM_ELEMENTS(ahc_pci_ident_table);
#define AHC_394X_SLOT_CHANNEL_A 4
#define AHC_394X_SLOT_CHANNEL_B 5
#define AHC_398X_SLOT_CHANNEL_A 4
#define AHC_398X_SLOT_CHANNEL_B 8
#define AHC_398X_SLOT_CHANNEL_C 12
#define AHC_494X_SLOT_CHANNEL_A 4
#define AHC_494X_SLOT_CHANNEL_B 5
#define AHC_494X_SLOT_CHANNEL_C 6
#define AHC_494X_SLOT_CHANNEL_D 7
#define DEVCONFIG 0x40
#define SCBSIZE32 0x00010000ul /* aic789X only */
#define MPORTMODE 0x00000400ul /* aic7870 only */
#define RAMPSM 0x00000200ul /* aic7870 only */
#define VOLSENSE 0x00000100ul
#define SCBRAMSEL 0x00000080ul
#define MRDCEN 0x00000040ul
#define EXTSCBTIME 0x00000020ul /* aic7870 only */
#define EXTSCBPEN 0x00000010ul /* aic7870 only */
#define BERREN 0x00000008ul
#define DACEN 0x00000004ul
#define STPWLEVEL 0x00000002ul
#define DIFACTNEGEN 0x00000001ul /* aic7870 only */
#define CSIZE_LATTIME 0x0c
#define CACHESIZE 0x0000003ful /* only 5 bits */
#define LATTIME 0x0000ff00ul
static int ahc_ext_scbram_present(struct ahc_softc *ahc);
static void ahc_scbram_config(struct ahc_softc *ahc, int enable,
int pcheck, int fast, int large);
static void ahc_probe_ext_scbram(struct ahc_softc *ahc);
static void check_extport(struct ahc_softc *ahc, u_int *sxfrctl1);
static void configure_termination(struct ahc_softc *ahc,
struct seeprom_descriptor *sd,
u_int adapter_control,
u_int *sxfrctl1);
static void ahc_new_term_detect(struct ahc_softc *ahc,
int *enableSEC_low,
int *enableSEC_high,
int *enablePRI_low,
int *enablePRI_high,
int *eeprom_present);
static void aic787X_cable_detect(struct ahc_softc *ahc, int *internal50_present,
int *internal68_present,
int *externalcable_present,
int *eeprom_present);
static void aic785X_cable_detect(struct ahc_softc *ahc, int *internal50_present,
int *externalcable_present,
int *eeprom_present);
static int acquire_seeprom(struct ahc_softc *ahc,
struct seeprom_descriptor *sd);
static void release_seeprom(struct seeprom_descriptor *sd);
static void write_brdctl(struct ahc_softc *ahc, uint8_t value);
static uint8_t read_brdctl(struct ahc_softc *ahc);
struct ahc_pci_identity *
ahc_find_pci_device(ahc_dev_softc_t pci)
{
uint64_t full_id;
uint16_t device;
uint16_t vendor;
uint16_t subdevice;
uint16_t subvendor;
struct ahc_pci_identity *entry;
u_int i;
vendor = ahc_pci_read_config(pci, PCIR_DEVVENDOR, /*bytes*/2);
device = ahc_pci_read_config(pci, PCIR_DEVICE, /*bytes*/2);
subvendor = ahc_pci_read_config(pci, PCIR_SUBVEND_0, /*bytes*/2);
subdevice = ahc_pci_read_config(pci, PCIR_SUBDEV_0, /*bytes*/2);
full_id = ahc_compose_id(device,
vendor,
subdevice,
subvendor);
for (i = 0; i < ahc_num_pci_devs; i++) {
entry = &ahc_pci_ident_table[i];
if (entry->full_id == (full_id & entry->id_mask))
return (entry);
}
return (NULL);
}
int
ahc_pci_config(struct ahc_softc *ahc, struct ahc_pci_identity *entry)
{
struct ahc_probe_config probe_config;
struct scb_data *shared_scb_data;
u_int command;
u_int our_id = 0;
u_int sxfrctl1;
u_int scsiseq;
u_int dscommand0;
int error;
uint8_t sblkctl;
shared_scb_data = NULL;
ahc_init_probe_config(&probe_config);
error = entry->setup(ahc->dev_softc, &probe_config);
if (error != 0)
return (error);
probe_config.chip |= AHC_PCI;
probe_config.description = entry->name;
error = ahc_pci_map_registers(ahc);
if (error != 0)
return (error);
/* Ensure busmastering is enabled */
command = ahc_pci_read_config(ahc->dev_softc, PCIR_COMMAND, /*bytes*/1);
command |= PCIM_CMD_BUSMASTEREN;
ahc_pci_write_config(ahc->dev_softc, PCIR_COMMAND, command, /*bytes*/1);
/* On all PCI adapters, we allow SCB paging */
probe_config.flags |= AHC_PAGESCBS;
error = ahc_softc_init(ahc, &probe_config);
if (error != 0)
return (error);
/* Remeber how the card was setup in case there is no SEEPROM */
pause_sequencer(ahc);
if ((ahc->features & AHC_ULTRA2) != 0)
our_id = ahc_inb(ahc, SCSIID_ULTRA2) & OID;
else
our_id = ahc_inb(ahc, SCSIID) & OID;
sxfrctl1 = ahc_inb(ahc, SXFRCTL1) & STPWEN;
scsiseq = ahc_inb(ahc, SCSISEQ);
error = ahc_reset(ahc);
if (error != 0)
return (ENXIO);
if ((ahc->features & AHC_DT) != 0) {
u_int sfunct;
/* Perform ALT-Mode Setup */
sfunct = ahc_inb(ahc, SFUNCT) & ~ALT_MODE;
ahc_outb(ahc, SFUNCT, sfunct | ALT_MODE);
ahc_outb(ahc, OPTIONMODE, OPTIONMODE_DEFAULTS);
/* Send CRC info in target mode every 4K */
ahc_outb(ahc, TARGCRCCNT, 0);
ahc_outb(ahc, TARGCRCCNT + 1, 0x10);
ahc_outb(ahc, SFUNCT, sfunct);
/* Normal mode setup */
ahc_outb(ahc, CRCCONTROL1, CRCVALCHKEN|CRCENDCHKEN|CRCREQCHKEN
|TARGCRCENDEN|TARGCRCCNTEN);
}
error = ahc_pci_map_int(ahc);
if (error != 0)
return (error);
dscommand0 = ahc_inb(ahc, DSCOMMAND0);
dscommand0 |= MPARCKEN|CACHETHEN;
if ((ahc->features & AHC_ULTRA2) != 0) {
/*
* DPARCKEN doesn't work correctly on
* some MBs so don't use it.
*/
dscommand0 &= ~DPARCKEN;
}
/*
* Handle chips that must have cache line
* streaming (dis/en)abled.
*/
if ((ahc->bugs & AHC_CACHETHEN_DIS_BUG) != 0)
dscommand0 |= CACHETHEN;
if ((ahc->bugs & AHC_CACHETHEN_BUG) != 0)
dscommand0 &= ~CACHETHEN;
ahc_outb(ahc, DSCOMMAND0, dscommand0);
ahc->pci_cachesize =
ahc_pci_read_config(ahc->dev_softc, CSIZE_LATTIME,
/*bytes*/1) & CACHESIZE;
ahc->pci_cachesize *= 4;
/* See if we have a SEEPROM and perform auto-term */
check_extport(ahc, &sxfrctl1);
/*
* Take the LED out of diagnostic mode
*/
sblkctl = ahc_inb(ahc, SBLKCTL);
ahc_outb(ahc, SBLKCTL, (sblkctl & ~(DIAGLEDEN|DIAGLEDON)));
if ((ahc->features & AHC_ULTRA2) != 0) {
ahc_outb(ahc, DFF_THRSH, RD_DFTHRSH_MAX|WR_DFTHRSH_MAX);
} else {
ahc_outb(ahc, DSPCISTATUS, DFTHRSH_100);
}
if (ahc->flags & AHC_USEDEFAULTS) {
/*
* PCI Adapter default setup
* Should only be used if the adapter does not have
* a SEEPROM.
*/
/* See if someone else set us up already */
if (scsiseq != 0) {
printf("%s: Using left over BIOS settings\n",
ahc_name(ahc));
ahc->flags &= ~AHC_USEDEFAULTS;
} else {
/*
* Assume only one connector and always turn
* on termination.
*/
our_id = 0x07;
sxfrctl1 = STPWEN;
}
ahc_outb(ahc, SCSICONF, our_id|ENSPCHK|RESET_SCSI);
ahc->our_id = our_id;
}
/*
* Take a look to see if we have external SRAM.
* We currently do not attempt to use SRAM that is
* shared among multiple controllers.
*/
ahc_probe_ext_scbram(ahc);
/*
* Record our termination setting for the
* generic initialization routine.
*/
if ((sxfrctl1 & STPWEN) != 0)
ahc->flags |= AHC_TERM_ENB_A;
/* Core initialization */
error = ahc_init(ahc);
if (error != 0)
return (error);
/*
* Link this softc in with all other ahc instances.
*/
ahc_softc_insert(ahc);
return (0);
}
/*
* Test for the presense of external sram in an
* "unshared" configuration.
*/
static int
ahc_ext_scbram_present(struct ahc_softc *ahc)
{
u_int chip;
int ramps;
int single_user;
uint32_t devconfig;
chip = ahc->chip & AHC_CHIPID_MASK;
devconfig = ahc_pci_read_config(ahc->dev_softc,
DEVCONFIG, /*bytes*/4);
single_user = (devconfig & MPORTMODE) != 0;
if ((ahc->features & AHC_ULTRA2) != 0)
ramps = (ahc_inb(ahc, DSCOMMAND0) & RAMPS) != 0;
else if (chip >= AHC_AIC7870)
ramps = (devconfig & RAMPSM) != 0;
else
ramps = 0;
if (ramps && single_user)
return (1);
return (0);
}
/*
* Enable external scbram.
*/
static void
ahc_scbram_config(struct ahc_softc *ahc, int enable, int pcheck,
int fast, int large)
{
uint32_t devconfig;
if (ahc->features & AHC_MULTI_FUNC) {
/*
* Set the SCB Base addr (highest address bit)
* depending on which channel we are.
*/
ahc_outb(ahc, SCBBADDR, ahc_get_pci_function(ahc->dev_softc));
}
devconfig = ahc_pci_read_config(ahc->dev_softc, DEVCONFIG, /*bytes*/4);
if ((ahc->features & AHC_ULTRA2) != 0) {
u_int dscommand0;
dscommand0 = ahc_inb(ahc, DSCOMMAND0);
if (enable)
dscommand0 &= ~INTSCBRAMSEL;
else
dscommand0 |= INTSCBRAMSEL;
if (large)
dscommand0 &= ~USCBSIZE32;
else
dscommand0 |= USCBSIZE32;
ahc_outb(ahc, DSCOMMAND0, dscommand0);
} else {
if (fast)
devconfig &= ~EXTSCBTIME;
else
devconfig |= EXTSCBTIME;
if (enable)
devconfig &= ~SCBRAMSEL;
else
devconfig |= SCBRAMSEL;
if (large)
devconfig &= ~SCBSIZE32;
else
devconfig |= SCBSIZE32;
}
if (pcheck)
devconfig |= EXTSCBPEN;
else
devconfig &= ~EXTSCBPEN;
ahc_pci_write_config(ahc->dev_softc, DEVCONFIG, devconfig, /*bytes*/4);
}
/*
* Take a look to see if we have external SRAM.
* We currently do not attempt to use SRAM that is
* shared among multiple controllers.
*/
static void
ahc_probe_ext_scbram(struct ahc_softc *ahc)
{
int num_scbs;
int test_num_scbs;
int enable;
int pcheck;
int fast;
int large;
enable = FALSE;
pcheck = FALSE;
fast = FALSE;
large = FALSE;
num_scbs = 0;
if (ahc_ext_scbram_present(ahc) == 0)
goto done;
/*
* Probe for the best parameters to use.
*/
ahc_scbram_config(ahc, /*enable*/TRUE, pcheck, fast, large);
num_scbs = ahc_probe_scbs(ahc);
if (num_scbs == 0) {
/* The SRAM wasn't really present. */
goto done;
}
enable = TRUE;
/*
* Clear any outstanding parity error
* and ensure that parity error reporting
* is enabled.
*/
ahc_outb(ahc, SEQCTL, 0);
ahc_outb(ahc, CLRINT, CLRPARERR);
ahc_outb(ahc, CLRINT, CLRBRKADRINT);
/* Now see if we can do parity */
ahc_scbram_config(ahc, enable, /*pcheck*/TRUE, fast, large);
num_scbs = ahc_probe_scbs(ahc);
if ((ahc_inb(ahc, INTSTAT) & BRKADRINT) == 0
|| (ahc_inb(ahc, ERROR) & MPARERR) == 0)
pcheck = TRUE;
/* Clear any resulting parity error */
ahc_outb(ahc, CLRINT, CLRPARERR);
ahc_outb(ahc, CLRINT, CLRBRKADRINT);
/* Now see if we can do fast timing */
ahc_scbram_config(ahc, enable, pcheck, /*fast*/TRUE, large);
test_num_scbs = ahc_probe_scbs(ahc);
if (test_num_scbs == num_scbs
&& ((ahc_inb(ahc, INTSTAT) & BRKADRINT) == 0
|| (ahc_inb(ahc, ERROR) & MPARERR) == 0))
fast = TRUE;
/*
* See if we can use large SCBs and still maintain
* the same overall count of SCBs.
*/
if ((ahc->features & AHC_LARGE_SCBS) != 0) {
ahc_scbram_config(ahc, enable, pcheck, fast, /*large*/TRUE);
test_num_scbs = ahc_probe_scbs(ahc);
if (test_num_scbs >= num_scbs) {
large = TRUE;
num_scbs = test_num_scbs;
if (num_scbs >= 64) {
/*
* We have enough space to move the
* "busy targets table" into SCB space
* and make it qualify all the way to the
* lun level.
*/
ahc->flags |= AHC_SCB_BTT;
}
}
}
done:
/*
* Disable parity error reporting until we
* can load instruction ram.
*/
ahc_outb(ahc, SEQCTL, PERRORDIS|FAILDIS);
/* Clear any latched parity error */
ahc_outb(ahc, CLRINT, CLRPARERR);
ahc_outb(ahc, CLRINT, CLRBRKADRINT);
if (bootverbose && enable) {
printf("%s: External SRAM, %s access%s, %dbytes/SCB\n",
ahc_name(ahc), fast ? "fast" : "slow",
pcheck ? ", parity checking enabled" : "",
large ? 64 : 32);
}
ahc_scbram_config(ahc, enable, pcheck, fast, large);
}
/*
* Check the external port logic for a serial eeprom
* and termination/cable detection contrls.
*/
static void
check_extport(struct ahc_softc *ahc, u_int *sxfrctl1)
{
struct seeprom_descriptor sd;
struct seeprom_config sc;
u_int scsi_conf;
u_int adapter_control;
int have_seeprom;
int have_autoterm;
sd.sd_ahc = ahc;
sd.sd_control_offset = SEECTL;
sd.sd_status_offset = SEECTL;
sd.sd_dataout_offset = SEECTL;
/*
* For some multi-channel devices, the c46 is simply too
* small to work. For the other controller types, we can
* get our information from either SEEPROM type. Set the
* type to start our probe with accordingly.
*/
if (ahc->flags & AHC_LARGE_SEEPROM)
sd.sd_chip = C56_66;
else
sd.sd_chip = C46;
sd.sd_MS = SEEMS;
sd.sd_RDY = SEERDY;
sd.sd_CS = SEECS;
sd.sd_CK = SEECK;
sd.sd_DO = SEEDO;
sd.sd_DI = SEEDI;
have_seeprom = acquire_seeprom(ahc, &sd);
if (have_seeprom) {
if (bootverbose)
printf("%s: Reading SEEPROM...", ahc_name(ahc));
for (;;) {
u_int start_addr;
start_addr = 32 * (ahc->channel - 'A');
have_seeprom = read_seeprom(&sd, (uint16_t *)&sc,
start_addr, sizeof(sc)/2);
if (have_seeprom)
have_seeprom = verify_cksum(&sc);
if (have_seeprom != 0 || sd.sd_chip == C56_66) {
if (bootverbose) {
if (have_seeprom == 0)
printf ("checksum error\n");
else
printf ("done.\n");
}
break;
}
sd.sd_chip = C56_66;
}
}
#if 0
if (!have_seeprom) {
/*
* Pull scratch ram settings and treat them as
* if they are the contents of an seeprom if
* the 'ADPT' signature is found in SCB2.
*/
ahc_outb(ahc, SCBPTR, 2);
if (ahc_inb(ahc, SCB_BASE) == 'A'
&& ahc_inb(ahc, SCB_BASE + 1) == 'D'
&& ahc_inb(ahc, SCB_BASE + 2) == 'P'
&& ahc_inb(ahc, SCB_BASE + 3) == 'T') {
uint8_t *sc_bytes;
int i;
sc_bytes = (uint8_t *)&sc;
for (i = 0; i < 64; i++)
sc_bytes[i] = ahc_inb(ahc, TARG_SCSIRATE + i);
/* Byte 0x1c is stored in byte 4 of SCB2 */
sc_bytes[0x1c] = ahc_inb(ahc, SCB_BASE + 4);
have_seeprom = verify_cksum(&sc);
}
}
#endif
if (!have_seeprom) {
if (bootverbose)
printf("%s: No SEEPROM available.\n", ahc_name(ahc));
ahc->flags |= AHC_USEDEFAULTS;
} else {
/*
* Put the data we've collected down into SRAM
* where ahc_init will find it.
*/
int i;
int max_targ = sc.max_targets & CFMAXTARG;
uint16_t discenable;
uint16_t ultraenb;
discenable = 0;
ultraenb = 0;
if ((sc.adapter_control & CFULTRAEN) != 0) {
/*
* Determine if this adapter has a "newstyle"
* SEEPROM format.
*/
for (i = 0; i < max_targ; i++) {
if ((sc.device_flags[i] & CFSYNCHISULTRA) != 0){
ahc->flags |= AHC_NEWEEPROM_FMT;
break;
}
}
}
for (i = 0; i < max_targ; i++) {
u_int scsirate;
uint16_t target_mask;
target_mask = 0x01 << i;
if (sc.device_flags[i] & CFDISC)
discenable |= target_mask;
if ((ahc->flags & AHC_NEWEEPROM_FMT) != 0) {
if ((sc.device_flags[i] & CFSYNCHISULTRA) != 0)
ultraenb |= target_mask;
} else if ((sc.adapter_control & CFULTRAEN) != 0) {
ultraenb |= target_mask;
}
if ((sc.device_flags[i] & CFXFER) == 0x04
&& (ultraenb & target_mask) != 0) {
/* Treat 10MHz as a non-ultra speed */
sc.device_flags[i] &= ~CFXFER;
ultraenb &= ~target_mask;
}
if ((ahc->features & AHC_ULTRA2) != 0) {
u_int offset;
if (sc.device_flags[i] & CFSYNCH)
offset = MAX_OFFSET_ULTRA2;
else
offset = 0;
ahc_outb(ahc, TARG_OFFSET + i, offset);
/*
* The ultra enable bits contain the
* high bit of the ultra2 sync rate
* field.
*/
scsirate = (sc.device_flags[i] & CFXFER)
| ((ultraenb & target_mask)
? 0x8 : 0x0);
if (sc.device_flags[i] & CFWIDEB)
scsirate |= WIDEXFER;
} else {
scsirate = (sc.device_flags[i] & CFXFER) << 4;
if (sc.device_flags[i] & CFSYNCH)
scsirate |= SOFS;
if (sc.device_flags[i] & CFWIDEB)
scsirate |= WIDEXFER;
}
ahc_outb(ahc, TARG_SCSIRATE + i, scsirate);
}
ahc->our_id = sc.brtime_id & CFSCSIID;
scsi_conf = (ahc->our_id & 0x7);
if (sc.adapter_control & CFSPARITY)
scsi_conf |= ENSPCHK;
if (sc.adapter_control & CFRESETB)
scsi_conf |= RESET_SCSI;
if (sc.bios_control & CFEXTEND)
ahc->flags |= AHC_EXTENDED_TRANS_A;
if (ahc->features & AHC_ULTRA
&& (ahc->flags & AHC_NEWEEPROM_FMT) == 0) {
/* Should we enable Ultra mode? */
if (!(sc.adapter_control & CFULTRAEN))
/* Treat us as a non-ultra card */
ultraenb = 0;
}
if (sc.signature == CFSIGNATURE) {
uint32_t devconfig;
/* Honor the STPWLEVEL settings */
devconfig = ahc_pci_read_config(ahc->dev_softc,
DEVCONFIG, /*bytes*/4);
devconfig &= ~STPWLEVEL;
if ((sc.bios_control & CFSTPWLEVEL) != 0)
devconfig |= STPWLEVEL;
ahc_pci_write_config(ahc->dev_softc, DEVCONFIG,
devconfig, /*bytes*/4);
}
/* Set SCSICONF info */
ahc_outb(ahc, SCSICONF, scsi_conf);
ahc_outb(ahc, DISC_DSB, ~(discenable & 0xff));
ahc_outb(ahc, DISC_DSB + 1, ~((discenable >> 8) & 0xff));
ahc_outb(ahc, ULTRA_ENB, ultraenb & 0xff);
ahc_outb(ahc, ULTRA_ENB + 1, (ultraenb >> 8) & 0xff);
}
/*
* Cards that have the external logic necessary to talk to
* a SEEPROM, are almost certain to have the remaining logic
* necessary for auto-termination control. This assumption
* hasn't failed yet...
*/
have_autoterm = have_seeprom;
if (have_seeprom)
adapter_control = sc.adapter_control;
else
adapter_control = CFAUTOTERM;
/*
* Some low-cost chips have SEEPROM and auto-term control built
* in, instead of using a GAL. They can tell us directly
* if the termination logic is enabled.
*/
if ((ahc->features & AHC_SPIOCAP) != 0) {
if ((ahc_inb(ahc, SPIOCAP) & SSPIOCPS) != 0)
have_autoterm = TRUE;
else
have_autoterm = FALSE;
}
if (have_autoterm)
configure_termination(ahc, &sd, adapter_control, sxfrctl1);
release_seeprom(&sd);
}
static void
configure_termination(struct ahc_softc *ahc,
struct seeprom_descriptor *sd,
u_int adapter_control,
u_int *sxfrctl1)
{
uint8_t brddat;
brddat = 0;
/*
* Update the settings in sxfrctl1 to match the
* termination settings
*/
*sxfrctl1 = 0;
/*
* SEECS must be on for the GALS to latch
* the data properly. Be sure to leave MS
* on or we will release the seeprom.
*/
SEEPROM_OUTB(sd, sd->sd_MS | sd->sd_CS);
if ((adapter_control & CFAUTOTERM) != 0
|| (ahc->features & AHC_NEW_TERMCTL) != 0) {
int internal50_present;
int internal68_present;
int externalcable_present;
int eeprom_present;
int enableSEC_low;
int enableSEC_high;
int enablePRI_low;
int enablePRI_high;
enableSEC_low = 0;
enableSEC_high = 0;
enablePRI_low = 0;
enablePRI_high = 0;
if ((ahc->features & AHC_NEW_TERMCTL) != 0) {
ahc_new_term_detect(ahc, &enableSEC_low,
&enableSEC_high,
&enablePRI_low,
&enablePRI_high,
&eeprom_present);
if ((adapter_control & CFSEAUTOTERM) == 0) {
if (bootverbose)
printf("%s: Manual SE Termination\n",
ahc_name(ahc));
enableSEC_low = (adapter_control & CFSELOWTERM);
enableSEC_high =
(adapter_control & CFSEHIGHTERM);
}
if ((adapter_control & CFAUTOTERM) == 0) {
if (bootverbose)
printf("%s: Manual LVD Termination\n",
ahc_name(ahc));
enablePRI_low = (adapter_control & CFSTERM);
enablePRI_high = (adapter_control & CFWSTERM);
}
/* Make the table calculations below happy */
internal50_present = 0;
internal68_present = 1;
externalcable_present = 1;
} else if ((ahc->features & AHC_SPIOCAP) != 0) {
aic785X_cable_detect(ahc, &internal50_present,
&externalcable_present,
&eeprom_present);
} else {
aic787X_cable_detect(ahc, &internal50_present,
&internal68_present,
&externalcable_present,
&eeprom_present);
}
if ((ahc->features & AHC_WIDE) == 0)
internal68_present = 0;
if (bootverbose) {
if ((ahc->features & AHC_ULTRA2) == 0) {
printf("%s: internal 50 cable %s present, "
"internal 68 cable %s present\n",
ahc_name(ahc),
internal50_present ? "is":"not",
internal68_present ? "is":"not");
printf("%s: external cable %s present\n",
ahc_name(ahc),
externalcable_present ? "is":"not");
}
printf("%s: BIOS eeprom %s present\n",
ahc_name(ahc), eeprom_present ? "is" : "not");
}
if ((ahc->flags & AHC_INT50_SPEEDFLEX) != 0) {
/*
* The 50 pin connector is a separate bus,
* so force it to always be terminated.
* In the future, perform current sensing
* to determine if we are in the middle of
* a properly terminated bus.
*/
internal50_present = 0;
}
/*
* Now set the termination based on what
* we found.
* Flash Enable = BRDDAT7
* Secondary High Term Enable = BRDDAT6
* Secondary Low Term Enable = BRDDAT5 (7890)
* Primary High Term Enable = BRDDAT4 (7890)
*/
if ((ahc->features & AHC_ULTRA2) == 0
&& (internal50_present != 0)
&& (internal68_present != 0)
&& (externalcable_present != 0)) {
printf("%s: Illegal cable configuration!!. "
"Only two connectors on the "
"adapter may be used at a "
"time!\n", ahc_name(ahc));
}
if ((ahc->features & AHC_WIDE) != 0
&& ((externalcable_present == 0)
|| (internal68_present == 0)
|| (enableSEC_high != 0))) {
brddat |= BRDDAT6;
if (bootverbose) {
if ((ahc->flags & AHC_INT50_SPEEDFLEX) != 0)
printf("%s: 68 pin termination "
"Enabled\n", ahc_name(ahc));
else
printf("%s: %sHigh byte termination "
"Enabled\n", ahc_name(ahc),
enableSEC_high ? "Secondary "
: "");
}
}
if (((internal50_present ? 1 : 0)
+ (internal68_present ? 1 : 0)
+ (externalcable_present ? 1 : 0)) <= 1
|| (enableSEC_low != 0)) {
if ((ahc->features & AHC_ULTRA2) != 0)
brddat |= BRDDAT5;
else
*sxfrctl1 |= STPWEN;
if (bootverbose) {
if ((ahc->flags & AHC_INT50_SPEEDFLEX) != 0)
printf("%s: 50 pin termination "
"Enabled\n", ahc_name(ahc));
else
printf("%s: %sLow byte termination "
"Enabled\n", ahc_name(ahc),
enableSEC_low ? "Secondary "
: "");
}
}
if (enablePRI_low != 0) {
*sxfrctl1 |= STPWEN;
if (bootverbose)
printf("%s: Primary Low Byte termination "
"Enabled\n", ahc_name(ahc));
}
/*
* Setup STPWEN before setting up the rest of
* the termination per the tech note on the U160 cards.
*/
ahc_outb(ahc, SXFRCTL1, *sxfrctl1);
if (enablePRI_high != 0) {
brddat |= BRDDAT4;
if (bootverbose)
printf("%s: Primary High Byte "
"termination Enabled\n",
ahc_name(ahc));
}
write_brdctl(ahc, brddat);
} else {
if ((adapter_control & CFSTERM) != 0) {
*sxfrctl1 |= STPWEN;
if (bootverbose)
printf("%s: %sLow byte termination Enabled\n",
ahc_name(ahc),
(ahc->features & AHC_ULTRA2) ? "Primary "
: "");
}
if ((adapter_control & CFWSTERM) != 0) {
brddat |= BRDDAT6;
if (bootverbose)
printf("%s: %sHigh byte termination Enabled\n",
ahc_name(ahc),
(ahc->features & AHC_ULTRA2)
? "Secondary " : "");
}
/*
* Setup STPWEN before setting up the rest of
* the termination per the tech note on the U160 cards.
*/
ahc_outb(ahc, SXFRCTL1, *sxfrctl1);
write_brdctl(ahc, brddat);
}
SEEPROM_OUTB(sd, sd->sd_MS); /* Clear CS */
}
static void
ahc_new_term_detect(struct ahc_softc *ahc, int *enableSEC_low,
int *enableSEC_high, int *enablePRI_low,
int *enablePRI_high, int *eeprom_present)
{
uint8_t brdctl;
/*
* BRDDAT7 = Eeprom
* BRDDAT6 = Enable Secondary High Byte termination
* BRDDAT5 = Enable Secondary Low Byte termination
* BRDDAT4 = Enable Primary high byte termination
* BRDDAT3 = Enable Primary low byte termination
*/
brdctl = read_brdctl(ahc);
*eeprom_present = brdctl & BRDDAT7;
*enableSEC_high = (brdctl & BRDDAT6);
*enableSEC_low = (brdctl & BRDDAT5);
*enablePRI_high = (brdctl & BRDDAT4);
*enablePRI_low = (brdctl & BRDDAT3);
}
static void
aic787X_cable_detect(struct ahc_softc *ahc, int *internal50_present,
int *internal68_present, int *externalcable_present,
int *eeprom_present)
{
uint8_t brdctl;
/*
* First read the status of our cables.
* Set the rom bank to 0 since the
* bank setting serves as a multiplexor
* for the cable detection logic.
* BRDDAT5 controls the bank switch.
*/
write_brdctl(ahc, 0);
/*
* Now read the state of the internal
* connectors. BRDDAT6 is INT50 and
* BRDDAT7 is INT68.
*/
brdctl = read_brdctl(ahc);
*internal50_present = !(brdctl & BRDDAT6);
*internal68_present = !(brdctl & BRDDAT7);
/*
* Set the rom bank to 1 and determine
* the other signals.
*/
write_brdctl(ahc, BRDDAT5);
/*
* Now read the state of the external
* connectors. BRDDAT6 is EXT68 and
* BRDDAT7 is EPROMPS.
*/
brdctl = read_brdctl(ahc);
*externalcable_present = !(brdctl & BRDDAT6);
*eeprom_present = brdctl & BRDDAT7;
}
static void
aic785X_cable_detect(struct ahc_softc *ahc, int *internal50_present,
int *externalcable_present, int *eeprom_present)
{
uint8_t brdctl;
ahc_outb(ahc, BRDCTL, BRDRW|BRDCS);
ahc_outb(ahc, BRDCTL, 0);
brdctl = ahc_inb(ahc, BRDCTL);
*internal50_present = !(brdctl & BRDDAT5);
*externalcable_present = !(brdctl & BRDDAT6);
*eeprom_present = (ahc_inb(ahc, SPIOCAP) & EEPROM) != 0;
}
static int
acquire_seeprom(struct ahc_softc *ahc, struct seeprom_descriptor *sd)
{
int wait;
if ((ahc->features & AHC_SPIOCAP) != 0
&& (ahc_inb(ahc, SPIOCAP) & SEEPROM) == 0)
return (0);
/*
* Request access of the memory port. When access is
* granted, SEERDY will go high. We use a 1 second
* timeout which should be near 1 second more than
* is needed. Reason: after the chip reset, there
* should be no contention.
*/
SEEPROM_OUTB(sd, sd->sd_MS);
wait = 1000; /* 1 second timeout in msec */
while (--wait && ((SEEPROM_STATUS_INB(sd) & sd->sd_RDY) == 0)) {
ahc_delay(1000); /* delay 1 msec */
}
if ((SEEPROM_STATUS_INB(sd) & sd->sd_RDY) == 0) {
SEEPROM_OUTB(sd, 0);
return (0);
}
return(1);
}
static void
release_seeprom(struct seeprom_descriptor *sd)
{
/* Release access to the memory port and the serial EEPROM. */
SEEPROM_OUTB(sd, 0);
}
static void
write_brdctl(struct ahc_softc *ahc, uint8_t value)
{
uint8_t brdctl;
if ((ahc->chip & AHC_CHIPID_MASK) == AHC_AIC7895) {
brdctl = BRDSTB;
if (ahc->channel == 'B')
brdctl |= BRDCS;
} else if ((ahc->features & AHC_ULTRA2) != 0) {
brdctl = 0;
} else {
brdctl = BRDSTB|BRDCS;
}
ahc_outb(ahc, BRDCTL, brdctl);
ahc_delay(20);
brdctl |= value;
ahc_outb(ahc, BRDCTL, brdctl);
ahc_delay(20);
if ((ahc->features & AHC_ULTRA2) != 0)
brdctl |= BRDSTB_ULTRA2;
else
brdctl &= ~BRDSTB;
ahc_outb(ahc, BRDCTL, brdctl);
ahc_delay(20);
if ((ahc->features & AHC_ULTRA2) != 0)
brdctl = 0;
else
brdctl &= ~BRDCS;
ahc_outb(ahc, BRDCTL, brdctl);
}
static uint8_t
read_brdctl(ahc)
struct ahc_softc *ahc;
{
uint8_t brdctl;
uint8_t value;
if ((ahc->chip & AHC_CHIPID_MASK) == AHC_AIC7895) {
brdctl = BRDRW;
if (ahc->channel == 'B')
brdctl |= BRDCS;
} else if ((ahc->features & AHC_ULTRA2) != 0) {
brdctl = BRDRW_ULTRA2;
} else {
brdctl = BRDRW|BRDCS;
}
ahc_outb(ahc, BRDCTL, brdctl);
ahc_delay(20);
value = ahc_inb(ahc, BRDCTL);
ahc_outb(ahc, BRDCTL, 0);
return (value);
}
#define DPE 0x80
#define SSE 0x40
#define RMA 0x20
#define RTA 0x10
#define STA 0x08
#define DPR 0x01
void
ahc_pci_intr(struct ahc_softc *ahc)
{
u_int error;
u_int status1;
error = ahc_inb(ahc, ERROR);
if ((error & PCIERRSTAT) == 0)
return;
status1 = ahc_pci_read_config(ahc->dev_softc,
PCIR_STATUS + 1, /*bytes*/1);
printf("%s: PCI error Interrupt at seqaddr = 0x%x\n",
ahc_name(ahc),
ahc_inb(ahc, SEQADDR0) | (ahc_inb(ahc, SEQADDR1) << 8));
if (status1 & DPE) {
printf("%s: Data Parity Error Detected during address "
"or write data phase\n", ahc_name(ahc));
}
if (status1 & SSE) {
printf("%s: Signal System Error Detected\n", ahc_name(ahc));
}
if (status1 & RMA) {
printf("%s: Received a Master Abort\n", ahc_name(ahc));
}
if (status1 & RTA) {
printf("%s: Received a Target Abort\n", ahc_name(ahc));
}
if (status1 & STA) {
printf("%s: Signaled a Target Abort\n", ahc_name(ahc));
}
if (status1 & DPR) {
printf("%s: Data Parity Error has been reported via PERR#\n",
ahc_name(ahc));
}
if ((status1 & (DPE|SSE|RMA|RTA|STA|DPR)) == 0) {
printf("%s: Latched PCIERR interrupt with "
"no status bits set\n", ahc_name(ahc));
}
ahc_pci_write_config(ahc->dev_softc, PCIR_STATUS + 1,
status1, /*bytes*/1);
if (status1 & (DPR|RMA|RTA)) {
ahc_outb(ahc, CLRINT, CLRPARERR);
}
unpause_sequencer(ahc);
}
static int
ahc_aic7850_setup(ahc_dev_softc_t pci, struct ahc_probe_config *probe_config)
{
probe_config->channel = 'A';
probe_config->chip = AHC_AIC7850;
probe_config->features = AHC_AIC7850_FE;
probe_config->bugs |= AHC_TMODE_WIDEODD_BUG|AHC_CACHETHEN_BUG
| AHC_PCI_MWI_BUG;
return (0);
}
static int
ahc_aic7855_setup(ahc_dev_softc_t pci, struct ahc_probe_config *probe_config)
{
probe_config->channel = 'A';
probe_config->chip = AHC_AIC7855;
probe_config->features = AHC_AIC7855_FE;
probe_config->bugs |= AHC_TMODE_WIDEODD_BUG|AHC_CACHETHEN_BUG
| AHC_PCI_MWI_BUG;
return (0);
}
static int
ahc_aic7860_setup(ahc_dev_softc_t pci, struct ahc_probe_config *probe_config)
{
uint8_t rev;
probe_config->channel = 'A';
probe_config->chip = AHC_AIC7860;
probe_config->features = AHC_AIC7860_FE;
probe_config->bugs |= AHC_TMODE_WIDEODD_BUG|AHC_CACHETHEN_BUG
| AHC_PCI_MWI_BUG;
rev = ahc_pci_read_config(pci, PCIR_REVID, /*bytes*/1);
if (rev >= 1)
probe_config->bugs |= AHC_PCI_2_1_RETRY_BUG;
return (0);
}
static int
ahc_aic7870_setup(ahc_dev_softc_t pci, struct ahc_probe_config *probe_config)
{
probe_config->channel = 'A';
probe_config->chip = AHC_AIC7870;
probe_config->features = AHC_AIC7870_FE;
probe_config->bugs |= AHC_TMODE_WIDEODD_BUG|AHC_CACHETHEN_BUG
| AHC_PCI_MWI_BUG;
return (0);
}
static int
ahc_aha394X_setup(ahc_dev_softc_t pci, struct ahc_probe_config *probe_config)
{
int error;
error = ahc_aic7870_setup(pci, probe_config);
if (error == 0)
error = ahc_aha394XX_setup(pci, probe_config);
return (error);
}
static int
ahc_aha398X_setup(ahc_dev_softc_t pci, struct ahc_probe_config *probe_config)
{
int error;
error = ahc_aic7870_setup(pci, probe_config);
if (error == 0)
error = ahc_aha398XX_setup(pci, probe_config);
return (error);
}
static int
ahc_aha494X_setup(ahc_dev_softc_t pci, struct ahc_probe_config *probe_config)
{
int error;
error = ahc_aic7870_setup(pci, probe_config);
if (error == 0)
error = ahc_aha494XX_setup(pci, probe_config);
return (error);
}
static int
ahc_aic7880_setup(ahc_dev_softc_t pci, struct ahc_probe_config *probe_config)
{
uint8_t rev;
probe_config->channel = 'A';
probe_config->chip = AHC_AIC7880;
probe_config->features = AHC_AIC7880_FE;
probe_config->bugs |= AHC_TMODE_WIDEODD_BUG;
rev = ahc_pci_read_config(pci, PCIR_REVID, /*bytes*/1);
if (rev >= 1) {
probe_config->bugs |= AHC_PCI_2_1_RETRY_BUG;
} else {
probe_config->bugs |= AHC_CACHETHEN_BUG|AHC_PCI_MWI_BUG;
}
return (0);
}
static int
ahc_2940Pro_setup(ahc_dev_softc_t pci, struct ahc_probe_config *probe_config)
{
int error;
probe_config->flags |= AHC_INT50_SPEEDFLEX;
error = ahc_aic7880_setup(pci, probe_config);
return (0);
}
static int
ahc_aha394XU_setup(ahc_dev_softc_t pci, struct ahc_probe_config *probe_config)
{
int error;
error = ahc_aic7880_setup(pci, probe_config);
if (error == 0)
error = ahc_aha394XX_setup(pci, probe_config);
return (error);
}
static int
ahc_aha398XU_setup(ahc_dev_softc_t pci, struct ahc_probe_config *probe_config)
{
int error;
error = ahc_aic7880_setup(pci, probe_config);
if (error == 0)
error = ahc_aha398XX_setup(pci, probe_config);
return (error);
}
static int
ahc_aic7890_setup(ahc_dev_softc_t pci, struct ahc_probe_config *probe_config)
{
uint8_t rev;
probe_config->channel = 'A';
probe_config->chip = AHC_AIC7890;
probe_config->features = AHC_AIC7890_FE;
probe_config->flags |= AHC_NEWEEPROM_FMT;
rev = ahc_pci_read_config(pci, PCIR_REVID, /*bytes*/1);
if (rev == 0)
probe_config->bugs |= AHC_AUTOFLUSH_BUG|AHC_CACHETHEN_BUG;
return (0);
}
static int
ahc_aic7892_setup(ahc_dev_softc_t pci, struct ahc_probe_config *probe_config)
{
probe_config->channel = 'A';
probe_config->chip = AHC_AIC7892;
probe_config->features = AHC_AIC7892_FE;
probe_config->flags |= AHC_NEWEEPROM_FMT;
probe_config->bugs |= AHC_SCBCHAN_UPLOAD_BUG;
return (0);
}
static int
ahc_aic7895_setup(ahc_dev_softc_t pci, struct ahc_probe_config *probe_config)
{
uint8_t rev;
probe_config->channel = ahc_get_pci_function(pci) == 1 ? 'B' : 'A';
/*
* The 'C' revision of the aic7895 has a few additional features.
*/
rev = ahc_pci_read_config(pci, PCIR_REVID, /*bytes*/1);
if (rev >= 4) {
probe_config->chip = AHC_AIC7895C;
probe_config->features = AHC_AIC7895C_FE;
} else {
u_int command;
probe_config->chip = AHC_AIC7895;
probe_config->features = AHC_AIC7895_FE;
/*
* The BIOS disables the use of MWI transactions
* since it does not have the MWI bug work around
* we have. Disabling MWI reduces performance, so
* turn it on again.
*/
command = ahc_pci_read_config(pci, PCIR_COMMAND, /*bytes*/1);
command |= PCIM_CMD_MWRICEN;
ahc_pci_write_config(pci, PCIR_COMMAND, command, /*bytes*/1);
probe_config->bugs |= AHC_PCI_MWI_BUG;
}
/*
* XXX Does CACHETHEN really not work??? What about PCI retry?
* on C level chips. Need to test, but for now, play it safe.
*/
probe_config->bugs |= AHC_TMODE_WIDEODD_BUG|AHC_PCI_2_1_RETRY_BUG
| AHC_CACHETHEN_BUG;
#if 0
uint32_t devconfig;
/*
* Cachesize must also be zero due to stray DAC
* problem when sitting behind some bridges.
*/
ahc_pci_write_config(pci, CSIZE_LATTIME, 0, /*bytes*/1);
devconfig = ahc_pci_read_config(pci, DEVCONFIG, /*bytes*/1);
devconfig |= MRDCEN;
ahc_pci_write_config(pci, DEVCONFIG, devconfig, /*bytes*/1);
#endif
probe_config->flags |= AHC_NEWEEPROM_FMT;
return (0);
}
static int
ahc_aic7896_setup(ahc_dev_softc_t pci, struct ahc_probe_config *probe_config)
{
probe_config->channel = ahc_get_pci_function(pci) == 1 ? 'B' : 'A';
probe_config->chip = AHC_AIC7896;
probe_config->features = AHC_AIC7896_FE;
probe_config->flags |= AHC_NEWEEPROM_FMT;
probe_config->bugs |= AHC_CACHETHEN_DIS_BUG;
return (0);
}
static int
ahc_aic7899_setup(ahc_dev_softc_t pci, struct ahc_probe_config *probe_config)
{
probe_config->channel = ahc_get_pci_function(pci) == 1 ? 'B' : 'A';
probe_config->chip = AHC_AIC7899;
probe_config->features = AHC_AIC7899_FE;
probe_config->flags |= AHC_NEWEEPROM_FMT;
probe_config->bugs |= AHC_SCBCHAN_UPLOAD_BUG;
return (0);
}
static int
ahc_raid_setup(ahc_dev_softc_t pci, struct ahc_probe_config *probe_config)
{
printf("RAID functionality unsupported\n");
return (ENXIO);
}
static int
ahc_aha394XX_setup(ahc_dev_softc_t pci, struct ahc_probe_config *probe_config)
{
switch (ahc_get_pci_slot(pci)) {
case AHC_394X_SLOT_CHANNEL_A:
probe_config->channel = 'A';
break;
case AHC_394X_SLOT_CHANNEL_B:
probe_config->channel = 'B';
break;
default:
printf("adapter at unexpected slot %d\n"
"unable to map to a channel\n",
ahc_get_pci_slot(pci));
probe_config->channel = 'A';
}
return (0);
}
static int
ahc_aha398XX_setup(ahc_dev_softc_t pci, struct ahc_probe_config *probe_config)
{
switch (ahc_get_pci_slot(pci)) {
case AHC_398X_SLOT_CHANNEL_A:
probe_config->channel = 'A';
break;
case AHC_398X_SLOT_CHANNEL_B:
probe_config->channel = 'B';
break;
case AHC_398X_SLOT_CHANNEL_C:
probe_config->channel = 'C';
break;
default:
printf("adapter at unexpected slot %d\n"
"unable to map to a channel\n",
ahc_get_pci_slot(pci));
probe_config->channel = 'A';
break;
}
probe_config->flags |= AHC_LARGE_SEEPROM;
return (0);
}
static int
ahc_aha494XX_setup(ahc_dev_softc_t pci, struct ahc_probe_config *probe_config)
{
switch (ahc_get_pci_slot(pci)) {
case AHC_494X_SLOT_CHANNEL_A:
probe_config->channel = 'A';
break;
case AHC_494X_SLOT_CHANNEL_B:
probe_config->channel = 'B';
break;
case AHC_494X_SLOT_CHANNEL_C:
probe_config->channel = 'C';
break;
case AHC_494X_SLOT_CHANNEL_D:
probe_config->channel = 'D';
break;
default:
printf("adapter at unexpected slot %d\n"
"unable to map to a channel\n",
ahc_get_pci_slot(pci));
probe_config->channel = 'A';
}
probe_config->flags |= AHC_LARGE_SEEPROM;
return (0);
}
Reference in New Issue View Git Blame Copy Permalink