mirror of
https://git.FreeBSD.org/src.git
synced 2024-12-23 11:18:54 +00:00
f71c01cc52
Use Warner Losh's "hint" driver to decode ascii strings to fill the resource table at boot time. config(8) no longer generates an ioconf.c table - ie: the configuration no longer has to be compiled into the kernel. You can reconfigure your isa devices with the likes of this at loader(8) time: set hint.ed.0.port=0x320 userconfig will be rewritten to use this style interface one day and will move to /boot/userconfig.4th or something like that. It is still possible to statically compile in a set of hints into a kernel if you do not wish to use loader(8). See the "hints" directive in GENERIC as an example. All device wiring has been moved out of config(8). There is a set of helper scripts (see i386/conf/gethints.pl, and the same for alpha and pc98) that extract the 'at isa? port foo irq bar' from the old files and produces a hints file. If you install this file as /boot/device.hints (and update /boot/defaults/loader.conf - You can do a build/install in sys/boot) then loader will load it automatically for you. You can also compile in the hints directly with: hints "device.hints" as well. There are a few things that I'm not too happy with yet. Under this scheme, things like LINT would no longer be useful as "documentation" of settings. I have renamed this file to 'NOTES' and stored the example hints strings in it. However... this is not something that config(8) understands, so there is a script that extracts the build-specific data from the documentation file (NOTES) to produce a LINT that can be config'ed and built. A stack of man4 pages will need updating. :-/ Also, since there is no longer a difference between 'device' and 'pseudo-device' I collapsed the two together, and the resulting 'device' takes a 'number of units' for devices that still have it statically allocated. eg: 'device fe 4' will compile the fe driver with NFE set to 4. You can then set hints for 4 units (0 - 3). Also note that 'device fe0' will be interpreted as "zero units of 'fe'" which would be bad, so there is a config warning for this. This is only needed for old drivers that still have static limits on numbers of units. All the statically limited drivers that I could find were marked. Please exercise EXTREME CAUTION when transitioning! Moral support by: phk, msmith, dfr, asmodai, imp, and others |
||
|---|---|---|
| .. | ||
| i4b_tina_dd.c | ||
| i4b_tina_ioctl.h | ||
| README | ||
THIS DRIVER IS NOT YET WORKING ! ================================ This adds support for the active ISDN card tina-dd manufactured by Stollmann E+V GmbH in Hamburg, Germany. This card was also sold by MIRO as the Miro P1. Christian Luehrs and Manfred Jung of Stollmann were very helpful giving out docs and sources to support the development of a driver for this card. The card supports many protocols. In order to make the card operable you'll need the downloadable firmware which also can be found on the www/ftp server, www.stollmann.de / ftp.stollmann.de. While developing this driver, i used fcdddss1.loc as of April 1994. The code is based in part on sources and header files written by Stollmann for their driver development kit for the tina-dd.