1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-05 09:14:03 +00:00
freebsd/sys/netatm/spans/spans_subr.c
Poul-Henning Kamp a3671bc8c8 Add back some now needed #include <sys/systm.h>
Fix various warnings while here anyway.
2000-12-07 22:19:06 +00:00

516 lines
10 KiB
C

/*
*
* ===================================
* HARP | Host ATM Research Platform
* ===================================
*
*
* This Host ATM Research Platform ("HARP") file (the "Software") is
* made available by Network Computing Services, Inc. ("NetworkCS")
* "AS IS". NetworkCS does not provide maintenance, improvements or
* support of any kind.
*
* NETWORKCS MAKES NO WARRANTIES OR REPRESENTATIONS, EXPRESS OR IMPLIED,
* INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY
* AND FITNESS FOR A PARTICULAR PURPOSE, AS TO ANY ELEMENT OF THE
* SOFTWARE OR ANY SUPPORT PROVIDED IN CONNECTION WITH THIS SOFTWARE.
* In no event shall NetworkCS be responsible for any damages, including
* but not limited to consequential damages, arising from or relating to
* any use of the Software or related support.
*
* Copyright 1994-1998 Network Computing Services, Inc.
*
* Copies of this Software may be made, however, the above copyright
* notice must be reproduced on all copies.
*
* @(#) $FreeBSD$
*
*/
/*
* SPANS Signalling Manager
* ---------------------------
*
* SPANS-related subroutines.
*
*/
#include <sys/param.h>
#include <sys/types.h>
#include <sys/systm.h>
#include <sys/errno.h>
#include <sys/time.h>
#include <sys/socket.h>
#include <sys/socketvar.h>
#include <sys/syslog.h>
#include <net/if.h>
#include <netinet/in.h>
#include <netatm/port.h>
#include <netatm/queue.h>
#include <netatm/atm.h>
#include <netatm/atm_sys.h>
#include <netatm/atm_sap.h>
#include <netatm/atm_cm.h>
#include <netatm/atm_if.h>
#include <netatm/atm_vc.h>
#include <netatm/atm_sigmgr.h>
#include <netatm/atm_stack.h>
#include <netatm/atm_pcb.h>
#include <netatm/atm_var.h>
#include "spans_xdr.h"
#include <netatm/spans/spans_var.h>
#ifndef lint
__RCSID("@(#) $FreeBSD$");
#endif
/*
* Open a SPANS VCC
*
* Called when a user wants to open a VC. This function will construct
* a VCCB, create the stack requested by the user, and, if we are
* opening an SVC, start the SPANS signalling message exchange. The
* user will have to wait for a notify event to be sure the SVC is fully
* open.
*
* Must be called at splnet.
*
* Arguments:
* spp pointer to SPANS protocol instance
* acp pointer to PVC's connection parameters
*
* Returns:
* 0 VCC creation successful
* errno VCC setup failed - reason indicated
*
*/
int
spans_open_vcc(spp, cvp)
struct spans *spp;
Atm_connvc *cvp;
{
struct atm_pif *pip = spp->sp_pif;
struct spans_vccb *svp;
Atm_addr_pvc *pvp;
spans_aal aal;
int err, pvc, vpi, vci;
ATM_DEBUG2("spans_open_vcc: spp=%p, cvp=%p\n", spp, cvp);
/*
* Validate user parameters. AAL and encapsulation are
* checked by the connection manager.
*/
/*
* Check called party address(es)
*/
if (cvp->cvc_attr.called.tag != T_ATM_PRESENT ||
cvp->cvc_attr.called.addr.address_format ==
T_ATM_ABSENT ||
cvp->cvc_attr.called.subaddr.address_format !=
T_ATM_ABSENT) {
return(EINVAL);
}
switch (cvp->cvc_attr.called.addr.address_format) {
case T_ATM_PVC_ADDR:
/*
* Make sure VPI/VCI is valid
*/
pvc = 1;
pvp = (Atm_addr_pvc *)cvp->cvc_attr.called.addr.address;
vpi = ATM_PVC_GET_VPI(pvp);
vci = ATM_PVC_GET_VCI(pvp);
if ((vpi > pip->pif_maxvpi) ||
(vci == 0) ||
(vci > pip->pif_maxvci)) {
return(ERANGE);
}
/*
* Make sure VPI/VCI is not already in use
*/
if (spans_find_vpvc(spp, vpi, vci, 0)) {
return(EADDRINUSE);
}
ATM_DEBUG2("spans_open_vcc: VPI.VCI=%d.%d\n",
vpi, vci);
break;
case T_ATM_SPANS_ADDR:
pvc = 0;
vpi = vci = 0;
/*
* Check signalling state
*/
if (spp->sp_state != SPANS_ACTIVE) {
return(ENETDOWN);
}
/*
*Check destination address length
*/
if (cvp->cvc_attr.called.addr.address_length !=
sizeof(spans_addr)) {
return(EINVAL);
}
break;
default:
return(EINVAL);
}
/*
* Check that this is for the same interface SPANS uses
*/
if (!cvp->cvc_attr.nif ||
cvp->cvc_attr.nif->nif_pif != spp->sp_pif) {
return(EINVAL);
}
/*
* Check AAL
*/
if (!spans_get_spans_aal(cvp->cvc_attr.aal.type, &aal)) {
return(EINVAL);
}
#ifdef NOTDEF
/*
* Check encapsulation
*/
/* XXX -- How do we check encapsulation? */
if (cvp->ac_encaps != ATM_ENC_NULL) {
return(EINVAL);
}
#endif
/*
* Allocate control block for VCC
*/
svp = (struct spans_vccb *)atm_allocate(&spans_vcpool);
if (svp == NULL) {
return(ENOMEM);
}
/*
* Fill in VCCB
*/
if (pvc) {
svp->sv_type = VCC_PVC | VCC_IN | VCC_OUT;
svp->sv_vpi = vpi;
svp->sv_vci = vci;
svp->sv_sstate = (spp->sp_state == SPANS_ACTIVE ?
SPANS_VC_ACTIVE : SPANS_VC_ACT_DOWN);
svp->sv_ustate = VCCU_OPEN;
} else {
svp->sv_type = VCC_SVC | VCC_OUT;
spans_addr_copy(cvp->cvc_attr.called.addr.address,
&svp->sv_conn.con_dst);
spans_addr_copy(spp->sp_addr.address,
&svp->sv_conn.con_src);
svp->sv_conn.con_dsap = SPANS_SAP_IP;
svp->sv_conn.con_ssap = spans_ephemeral_sap(spp);
svp->sv_sstate = SPANS_VC_POPEN;
svp->sv_ustate = VCCU_POPEN;
}
svp->sv_proto = ATM_SIG_SPANS;
svp->sv_pif = spp->sp_pif;
svp->sv_nif = cvp->cvc_attr.nif;
svp->sv_connvc = cvp;
svp->sv_spans_aal = aal;
svp->sv_tstamp = time_second;
/*
* Put VCCB on SPANS queue
*/
ENQUEUE(svp, struct spans_vccb, sv_sigelem, spp->sp_vccq);
/*
* Link VCCB to VCC connection block
*/
cvp->cvc_vcc = (struct vccb *) svp;
/*
* Start the SPANS message exchange if this is an SVC
*/
if (!pvc) {
svp->sv_retry = 0;
svp->sv_spans_qos.rsc_peak = 1;
svp->sv_spans_qos.rsc_mean = 1;
svp->sv_spans_qos.rsc_burst = 1;
err = spans_send_open_req(spp, svp);
if (err) {
/*
* On error, delete the VCCB
*/
DEQUEUE(svp, struct spans_vccb, sv_sigelem,
spp->sp_vccq);
cvp->cvc_vcc = (struct vccb *)0;
atm_free((caddr_t)svp);
return(err);
} else {
/*
* VCCB is opening--set the retransmit timer
*/
SPANS_VC_TIMER((struct vccb *) svp, SV_TIMEOUT);
}
}
return(0);
}
/*
* Close a SPANS VCC
*
* Called when a user wants to close a VCC. This function will clean
* up the VCCB and, for an SVC, send a close request.
*
* Must be called at splnet.
*
* Arguments:
* spp pointer to SPANS protocol instance
* svp pointer to VCCB for the VCC to be closed
*
* Returns:
* 0 VCC is now closed
* errno error encountered
*/
int
spans_close_vcc(spp, svp, force)
struct spans *spp;
struct spans_vccb *svp;
int force;
{
int err = 0;
ATM_DEBUG2("spans_close_vcc: svp=%p, state=%d\n", svp,
svp->sv_sstate);
/*
* Check that this is for the same interface SPANS uses
*/
if (svp->sv_pif != spp->sp_pif) {
return (EINVAL);
}
/*
* Kill any possible timer
*/
SPANS_VC_CANCEL((struct vccb *) svp);
/*
* Mark the close time.
*/
svp->sv_tstamp = time_second;
/*
* Process based on the connection type
*/
if (svp->sv_type & VCC_PVC) {
svp->sv_sstate = SPANS_VC_FREE;
svp->sv_ustate = VCCU_CLOSED;
} else if (svp->sv_type & VCC_SVC) {
/*
* Update VCCB states
*/
svp->sv_ustate = VCCU_CLOSED;
/*
* Send the appropriate SPANS close message
*/
switch (svp->sv_sstate) {
case SPANS_VC_R_POPEN:
err = spans_send_open_rsp(spp, svp, SPANS_FAIL);
svp->sv_sstate = SPANS_VC_FREE;
break;
case SPANS_VC_OPEN:
case SPANS_VC_POPEN:
case SPANS_VC_ABORT:
svp->sv_retry = 0;
err = spans_send_close_req(spp, svp);
if (force) {
svp->sv_sstate = SPANS_VC_FREE;
} else {
svp->sv_sstate = SPANS_VC_CLOSE;
SPANS_VC_TIMER((struct vccb *) svp,
SV_TIMEOUT);
}
break;
case SPANS_VC_CLOSE:
if (force) {
svp->sv_sstate = SPANS_VC_FREE;
}
break;
}
}
/*
* Wait for user to free resources
*/
return(err);
}
/*
* Clear a SPANS VCC
*
* Called when the signalling manager wants to close a VCC immediately.
* This function will clean up the VCCB and notify the owner.
*
* Must be called at splnet.
*
* Arguments:
* spp pointer to SPANS protocol instance
* svp pointer to VCCB for the VCC to be closed
*
* Returns:
* 0 VCC is now closed
* errno error encountered
*/
int
spans_clear_vcc(spp, svp)
struct spans *spp;
struct spans_vccb *svp;
{
u_char outstate;
ATM_DEBUG2("spans_clear_vcc: svp=%p, state=%d\n", svp,
svp->sv_sstate);
/*
* Check that this is for the same interface SPANS uses
*/
if (svp->sv_pif != spp->sp_pif) {
return (EINVAL);
}
/*
* Kill any possible timer
*/
SPANS_VC_CANCEL((struct vccb *) svp);
/*
* Mark the close time
*/
svp->sv_tstamp = time_second;
/*
* Mark the VCCB closed
*/
outstate = svp->sv_sstate;
svp->sv_sstate = SPANS_VC_FREE;
svp->sv_ustate = VCCU_CLOSED;
/*
* Notify the user if old state indicates.
*/
switch (outstate) {
case SPANS_VC_ACTIVE:
case SPANS_VC_ACT_DOWN:
case SPANS_VC_POPEN:
case SPANS_VC_OPEN:
case SPANS_VC_CLOSE:
case SPANS_VC_ABORT:
/* XXX -- set cause */
atm_cm_cleared(svp->sv_connvc);
break;
case SPANS_VC_NULL:
case SPANS_VC_R_POPEN:
case SPANS_VC_FREE:
break;
}
/*
* Wait for user to free resources
*/
return(0);
}
/*
* Reset the switch state
*
* Called when the switch or host at the far end of the ATM link has
* gone away. This can be deteched either by a number of SPANS_STAT_REQ
* messages going unanswered or by the host epoch changing in a SPANS
* SPANS_STAT_IND or SPANS_STAT_REQ message.
*
* Arguments:
* spp pointer to SPANS protocol instance
*
* Returns:
* none
*
*/
void
spans_switch_reset(spp, cause)
struct spans *spp;
int cause;
{
int s;
struct vccb *vcp, *vnext;
ATM_DEBUG2("spans_switch_reset: spp=%p, cause=%d\n",
spp, cause);
/*
* Log the event
*/
log(LOG_INFO, "spans: signalling %s on interface %s%d\n",
(cause == SPANS_UNI_DOWN ? "down" : "up"),
spp->sp_pif->pif_name,
spp->sp_pif->pif_unit);
/*
* Terminate all of our VCCs
*/
s = splnet();
for (vcp = Q_HEAD(spp->sp_vccq, struct vccb); vcp;
vcp = vnext) {
u_char outstate;
vnext = Q_NEXT(vcp, struct vccb, vc_sigelem);
if (vcp->vc_type & VCC_SVC) {
/*
* Close the SVC and notify the owner
*/
outstate = vcp->vc_sstate;
SPANS_VC_CANCEL((struct vccb *) vcp);
vcp->vc_ustate = VCCU_CLOSED;
vcp->vc_sstate = SPANS_VC_FREE;
if (outstate == SPANS_VC_OPEN ||
outstate == SPANS_VC_POPEN) {
/* XXX -- set cause */
atm_cm_cleared(vcp->vc_connvc);
}
} else if (vcp->vc_type & VCC_PVC) {
/*
* Note new state
*/
switch(cause) {
case SPANS_UNI_DOWN:
vcp->vc_sstate = SPANS_VC_ACT_DOWN;
break;
case SPANS_UNI_UP:
vcp->vc_sstate = SPANS_VC_ACTIVE;
break;
}
} else {
log(LOG_ERR, "spans: invalid VCC type: vccb=%p, type=%d\n",
vcp, vcp->vc_type);
}
}
(void) splx(s);
}